Ultima X Series EC Declaration of Conformity

Embed Size (px)

Citation preview

  • 7/28/2019 Ultima X Series EC Declaration of Conformity

    1/8

    EC Declaration of ConformityMSA

    ULTIMA X

    SeriesGB 3

    EC Declaration of Conformity

    Manufactured by: Mine Safety Appliances Company

    1000 Cranberry Woods Drive

    Cranberry Township, PA 16066 USA

    The manufacturer or the European Authorized Representative:

    MSA AUER GmbH, Thiemannstrasse 1, D-12059 Berlin

    declares that theproduct

    ULTIMA XE Main

    ULTIMA XE Main with HART Module

    based on the EC-Type Examination Certificate: DMT 02 ATEX E 202 X

    complies with the ATEX directive 94/9/EC, Annex III. Quality Assurance Notification

    complying with Annex IV of the ATEX Directive 94/9/EC has been issued byIneris of France, Notified Body number: 0080.

    The product is in conformance with the EMC directive 2004 / 108/ EC,EN 50270 :2006 Type 2 *, EN 61000 - 6 - 3 :2007

    * EN 61000-4-6 : Ultima XE MAIN HART MODULE : occasional transmission error can appear at the2-wire version. A fault check has to be used at the receiver unit.

    The product complies with the directive 96/98 / EC (MarED),

    based on the EC-Type Examination Certificate : SEE BG 213.038

    The quality survaillance is under the control of SEE BG, Notified Body number: 0736

    We further declare that the product complies with the provisions of

    LVD Directive 2006 / 95/ EC, with the following harmonised standard:

    EN 61010-1 :2002

    MSA AUER GmbH

    Dr. Axel Schubert

    R&D Instruments

    Berlin, October 2008

  • 7/28/2019 Ultima X Series EC Declaration of Conformity

    2/8

    MSAEC Declaration of Conformity

    ULTIMA X

    Series4 GB

    EC Declaration of Conformity

    Manufactured by: Mine Safety Appliances Company

    1000 Cranberry Woods Drive

    Cranberry Township, PA 16066 USA

    The manufacturer or the European Authorized Representative:

    MSA AUER GmbH, Thiemannstrasse 1, D-12059 Berlin

    declares that the

    product ULTIMA SENSOR XE

    based on the EC-Type Examination Certificate: DMT 02 ATEX E 202 X

    complies with the ATEX directive 94/9/EC, Annex III. Quality Assurance Notificationcomplying with Annex IV of the ATEX Directive 94/9/EC has been issued by

    Ineris of France, Notified Body number: 0080.

    The product is in conformance with the EMC directive 2004 / 108/ EC,

    EN 50270 :2006 Type 2, EN 61000 - 6 - 3 :2007

    The product complies with the directive 96/98 / EC (MarED),

    based on the EC-Type Examination Certificate: SEE BG 213.038

    The quality survaillance is under the control of SEE BG, Notified Body number: 0736

    MSA AUER GmbH

    Dr. Axel Schubert

    R&D Instruments

    Berlin, October 2008

  • 7/28/2019 Ultima X Series EC Declaration of Conformity

    3/8

    EC Declaration of ConformityMSA

    ULTIMA X

    SeriesGB 5

    EC Declaration of Conformity

    Manufactured by: Mine Safety Appliances Company

    1000 Cranberry Woods Drive

    Cranberry Township, PA 16066 USA

    The manufacturer or the European Authorized Representative:

    MSA AUER GmbH, Thiemannstrasse 1, D-12059 Berlin

    declares that the

    product ULTIMA XE SENSOR OX/TOX

    based on the EC-Type Examination Certificate: DMT 02 ATEX E 202 X

    complies with the ATEX directive 94/9/EC, Annex III. Quality Assurance Notificationcomplying with Annex IV of the ATEX Directive 94/9/EC has been issued by

    Ineris of France, Notified Body number: 0080.

    The product is in conformance with the EMC directive 2004 / 108/ EC,

    EN 50270 :2006 Type 2, EN 61000 - 6 - 3 :2007

    The product complies with the directive 96/98 / EC (MarED),

    based on the EC-Type Examination Certificate : SEE BG 213.038

    The quality survaillance is under the control of SEE BG, Notified Body number: 0736

    MSA AUER GmbH

    Dr. Axel Schubert

    R&D Instruments

    Berlin, October 2008

  • 7/28/2019 Ultima X Series EC Declaration of Conformity

    4/8

    MSAEC Declaration of Conformity

    ULTIMA X

    Series6 GB

    EC Declaration of Conformity

    Manufactured by: Mine Safety Appliances Company

    1000 Cranberry Woods Drive

    Cranberry Township, PA 16066 USA

    The manufacturer or the European Authorized Representative:

    MSA AUER GmbH, Thiemannstrasse 1, D-12059 Berlindeclares that theproduct ULTIMA XIR SENSOR

    in combination with ULTIMA XE MAIN or

    ULTIMA X J unction Box

    based on the EC-Type Examination Certificate: DMT 02 ATEX E 202 X

    complies with the ATEX directive 94/9/EC, Annex III. Quality Assurance Notificationcomplying with Annex IV of the ATEX Directive 94/9/EC has been issued by

    Ineris of France, Notified Body number: 0080.The product is in conformance with the EMC directive 2004 / 108/ EC,

    EN 50270 :2006 Type 2, EN 61000 - 6 - 3 :2007

    The product complies with the directive 96/98 / EC (MarED),

    based on the EC-Type Examination Certificate : SEE BG 213.038

    The quality survaillance is under the control of SEE BG, Notified Body number: 0736

    MSA AUER GmbH

    Dr. Axel Schubert

    R&D Instruments

    Berlin, October 2008

  • 7/28/2019 Ultima X Series EC Declaration of Conformity

    5/8

    EC Declaration of ConformityMSA

    ULTIMA X

    SeriesGB 7

    EC Declaration of Conformity

    Manufactured by: Mine Safety Appliances Company

    1000 Cranberry Woods Drive

    Cranberry Township, PA 16066 USA

    The manufacturer or the European Authorized Representative:

    MSA AUER GmbH, Thiemannstrasse 1, D-12059 Berlin

    declares that the

    product ULTIMA XI

    based on the EC-Type Examination Certificate: DMT 02 ATEX E 202 X

    complies with the ATEX directive 94/9/EC, Annex III. Quality Assurance Notificationcomplying with Annex IV of the ATEX Directive 94/9/EC has been issued by

    Ineris of France, Notified Body number: 0080.

    The product is in conformance with the EMC directive 2004 / 108/ EC,

    EN 50270 :2006 Type 2, EN 61000 - 6 - 3 :2007

    The product complies with the directive 96/98 / EC (MarED),

    based on the EC-Type Examination Certificate : SEE BG 213.039

    The quality survaillance is under the control of SEE BG, Notified Body number: 0736

    MSA AUER GmbH

    Dr. Axel Schubert

    R&D Instruments

    Berlin, October 2008

  • 7/28/2019 Ultima X Series EC Declaration of Conformity

    6/8

    MSAEC Declaration of Conformity

    ULTIMA X

    Series8 GB

    EC Declaration of Conformity

    Manufactured by: Mine Safety Appliances Company

    1000 Cranberry Woods Drive

    Cranberry Township, PA 16066 USA

    The manufacturer or the European Authorized Representative:

    MSA AUER GmbH, Thiemannstrasse 1, D-12059 Berlin

    declares that the

    product

    ULTIMA X Junction Box with Sensor type

    ULTIMA XE or

    ULTIMA XIR or

    ULTIMA XE OX/TOX

    based on the EC-Type Examination Certificate: DMT 02 ATEX E 202 X

    complies with the ATEX directive 94/9/EC, Annex III. Quality Assurance Notificationcomplying with Annex IV of the ATEX Directive 94/9/EC has been issued byIneris of France, Notified Body number: 0080.

    We further declare that the product complies with the EMC directive 2004 / 108 / EC:

    EN 50270: 2006 Type 2, EN 61000 - 6 - 3: 2007

    MSA AUER GmbH

    Dr. Axel Schubert

    R&D Instruments

    Berlin, October 2008

  • 7/28/2019 Ultima X Series EC Declaration of Conformity

    7/8

    EC Declaration of ConformityMSA

    ULTIMA X

    SeriesGB 9

    EC Declaration of Conformity

    Manufactured by: Mine Safety Appliances Company

    1000 Cranberry Woods Drive

    Cranberry Township, PA 16066 USA

    The manufacturer or the European Authorized Representative:MSA AUER GmbH, Thiemannstrasse 1, D-12059 Berlin

    declares that the

    product ULTIMA XA (24V no relays)

    complies with the EMC directive 2004 / 108/ EC

    EN 50270: 2006 Type 2, EN 61000 - 6 - 3: 2007

    MSA AUER GmbH

    Dr. Axel Schubert

    R&D Instruments

    Berlin, October 2008

  • 7/28/2019 Ultima X Series EC Declaration of Conformity

    8/8

    MSAEC Declaration of Conformity

    ULTIMA X

    Series10 GB

    EC Declaration of Conformity

    Manufactured by: Mine Safety Appliances Company

    1000 Cranberry Woods Drive

    Cranberry Township, PA 16066 USA

    The manufacturer or the European Authorized Representative:MSA AUER GmbH, Thiemannstrasse 1, D-12059 Berlin

    declares that the

    product HART MODULE

    based on the EC-Type Examination Certificate: DMT 02 ATEX E 202 X

    complies with the ATEX directive 94/9/EC, Annex III. Quality Assurance Notificationcomplying with Annex IV of the ATEX Directive 94/9/EC has been issued by

    Ineris of France, Notified Body number: 0080.

    We further declare that the product complies with the EMC directive 2004 / 108 / EC:

    EN 50270: 2006 Type 2, EN 61000 - 6 - 3: 2007

    MSA AUER GmbH

    Dr. Axel Schubert

    R&D Instruments

    Berlin, October 2008