UL LISTED ENCLOSURE AIR CONDITIONERS - info.thermal-edge…info.thermal-edge.com/hubfs/docs/TEI_Air_Conditioners_Full_Line... · 2. Improved refrigerant return to the compressor assures

(972) 580-0200 or (888) 580-0202 • www.thermal-edge.com • [email protected]

UL LISTED ENCLOSURE AIR CONDITIONERS

FULLY INTEGRATED CONDENSATE EVAPORATION PACKAGE

PROGRAMMABLE DIGITAL CONTROLLER

THERMAL EXPANSION VALVE

NARROW DESIGN TO FIT ONTO A 12” ENCLOSURE


THERMAL EDGE ENCLOSURE AIR CONDITIONER’S FEATURES AND BENEFITS

DRIP-FREE CONDENSATE REMOVAL IS NOT OPTIONAL

Liquid Condensate is the by-product of every air conditioner. At Thermal Edge

we understand that a puddle next to your sensitive electronic enclosure may not be ideal. We eliminate this messy problem by changing the troublesome liquid

back into a vapor and venting it out of your way. That means no puddles,

stains or mess near your electrical enclosure, control system or production line. In addition, our condensate evaporation system precools the refrigerant which

lowers the running amps and thus lowers your energy usage.

CONDENSATE EVAPORATION IS STANDARD ON EVERY UNIT With Thermal Edge Units...NO DRAIN TUBE IS NEEDED .

THERMAL EXPANSION VALVE CONTROLS THE FLOW

All phase change refrigerant systems require an expansion device which controls

the flow of refrigerant in the evaporator. Two principal types of control are used: Thermal Expansion Valves or Capillary Tubes.

Thermal Expansion Valves balance and modulate the refrigerant flow to the

heat load by sensing the temperature of the refrigerant leaving the evaporator.

There are three major advantages to this refrigerant control method.

1. Maximum efficiency over a wide temperature and load range. 2. Improved refrigerant return to the compressor assures better cooling at

high temperatures and reduces the possibility of liquid slugging which can destroy the compressor.

3. Variations in refrigerant charge, particularly smaller units, are less critical.

WITH THERMAL EDGE, YOU HAVE A SMARTER ENCLOSURE AIR CONDITIONER

Digital, programmable controller:

Fully programmable

Built in alarms and alerts

Will operate heating & cooling

Standard on every unit

Ethernet, Modbus RTU and Ethernet/IP communication options


ATTENTION: If ordering a replacement for a Thermal Edge air conditioner, please include the part number and serial number of the unit being replaced in your order. This will assure that we ship a replacement that is compatible with the cutout dimensions and power connection features of the older model.

All information subject to change without notice

ODEL BTU/HOUR VOLTAGE/ PHASE/

HZ.

RUNNING AMPS

MAXIMUM AMBIENT TEMP.

MAXIMUM INTEGRATED

HEAT IN WATTS H X W X D

SHIP WEIGHT

NE010126 1,000 120/1/60 2.69 125°F NA 22” x 11.8” x 8.5” 67

NE010236 1,000 230/1/60 1.99 125°F NA 22” x 11.8” x 8.5” 67

CS011D48 1,000 48 VDC 3.70 125°F NA 17” x 7” x 7” 43

CS011126 1,000 120/1/60 2.70 131°F 350 17” x 7” x 7” 43

NE015126 1,500 120/1/60 3.44 125°F NA 22” x 11.8” x 8.5” 67

NE015236 1,500 230/1/60 2.67 125°F NA 22” x 11.8” x 8.5” 67

NE020126 2,000 120/1/60 3.76 125°F 1000 32“ x 11.8“ x 9.5“ 111

NE020236 2,000 230/1/60 3.07 125°F 1000 32“ x 11.8“ x 9.5“ 116

NE020486 2,000 480/1/60 0.93 125°F 1000 38” x 11.8” x 9.5” 141

CS020126 2,000 120/1/60 3.36 131°F 500 20” x 10” x 10” 56

CS020236 2,000 230/1/60 2.00 131°F 500 20” x 10” x 10” 59

NE030126 3,000 120/1/60 5.15 125°F 1000 32” x 11.8“ x 9.5” 111

NE030236 3,000 230/1/60 3.07 125°F 1000 32” x 11.8“ x 9.5” 116

NE030486 3,000 480/1/60 1.51 125°F 1000 38” x 11.8” x 9.5” 141

NE040D48 4,000 48 VDC 22.3 131°F NA 35.27” x 11.8“ x 9.5” 120

NE040126 4,000 120/1/60 5.53 125°F 1000 32” x 11.8“ x 9.5” 111

NE040236 4,000 230/1/60 3.07 125°F 1000 32” x 11.8“ x 9.5” 116

NE040486 4,000 480/1/60 1.51 125°F 1000 38” x 11.8“ x 9.5” 141

NE050126 5,000 120/1/60 7.26 125°F 1000 36“ x 11.8“ x 15.1” 139

NE050236 5,000 230/1/60 3.76 125°F 1000 36“ x 11.8“ x 15.1” 140

NE050486 5,000 480/1/60 1.44 125°F 1000 44.63” x 11.8” x 15.1” 189

NE060126 6,000 120/1/60 7.83 125°F 1000 36“ x 11.8“ x 15.1” 139

NE060236 6,000 230/1/60 4.80 125°F 1000 36“ x 11.8“ x 15.1” 140

NE060486 6,000 480/1/60 1.80 125°F 1000 44.63” x 11.8” x 15.1” 189

NE080126 8,000 120/1/60 7.83 125°F 1000 36“ x 11.8“ x 15.1” 139

NE080236 8,000 230/1/60 4.80 125°F 1000 36“ x 11.8“ x 15.1” 140

NE080486 8,000 480/1/60 1.80 125°F 1000 44.63” x 11.8” x 15.1” 189

HC101126 10,000 120/1/60 19.4 131°F 1500 48” x 15.9” x 15.1” 183

HC101236 10,000 230/1/60 8.20 131°F 1500 48” x 15.9” x 15.1” 186

HC101486 10,000 480/1/60 3.93 131°F 1500 57.6” x 15.9” x 15.1” 244

HC121126 12,000 120/1/60 19.4 131°F 1500 48” x 15.9” x 15.1” 183

HC121236 12,000 230/1/60 8.20 131°F 1500 48” x 15.9” x 15.1” 186

HC121486 12,000 480/1/60 3.93 131°F 1500 57.6” x 15.9” x 15.1” 244

HC151236 15,000 230/1/60 11.3 131°F 1500 48” x 15.9” x 15.1” 191

HC151486 15,000 480/1/60 5.41 131°F 1500 57.6” x 15.9” x 15.1” 256

HC201236 20,000 230/1/60 15.3 131°F 1500 56.1” x 23” x 15” 226

HC201486 20,000 480/1/60 7.7 131°F 1500 65.7” x 23” x 15” 342


Brochure #1

2016-02-22

The Legendary

Green Bay Packers Coach Vince Lombardi said:

“Winning is not a sometime

thing; it’s an all-the-time thing. You don’t win once in a while, you don’t do things right once in a while, you do them right

all the time. Winning is a habit. Unfortunately, so is losing.”

Condensate evaporation package

Fully programmable digital controller

Thermal expansion valve

Full product line available in NEMA Types 12, 4 & 4X

UL Listed under Standard 484, file number SA32252

On/off switch as mandated by UL Standard 484

Rigid chassis and seam welded shroud

Proudly manufactured in the U.S.A.

Inventory on Hand

Customer Service answer-

ing your calls

A website that is easy to

navigate AND solutions

that are easy to find

Equipment tested to

perform and built to last

Units designed with our

customer’s applications and

environments in mind

Systems engineered to

maintain lower running

amps and higher efficiency

Features and Accessories

designed to solve critical

applications as in Corrosive

or Hazardous Environments

NOTE: AIR CONDITIONERS ARE SHIPPED SEPARATELY FROM ENCLOSURES

S T A N D A R D O N E V E R Y T H E R M A L E D G E A I R C O N D I T I O N E R :


A I R C O N D I T I O N E R O P T I O N S :

Electrostatic Coil Coating to prevent corrosion caused by a salt or chemical laden

environment

Enclosure door kill switch

Integrated Heat Packages to provide total temperature control for your enclosure

not just from the heat of summer but from the cold of winter

Dry Contact Options to allow the use of alarms, lights and notifications

Remote monitoring options

External Heat Control to support use of an externally mounted heater in the

enclosure

Vibration Package allows for enclosure cooling on cranes, moving vehicles or

other difficult locations. These systems are available in two levels

2” Deep Extended Filter Media for applications like flour, cement or coal when a

standard filter will load too quickly

Remote Controller Option to place our digital controller inside the electrical enclo-

sure when the environment requires a more secure setting

The Universal Mounting Plate allows the mounting of the Thermal Edge Enclosure

Air Conditioner onto an enclosure that formerly held a different brand of air

conditioner.

UL Listed Hazardous Location option, Class 1, Div 2, Groups B, C, D

Contact Us Today for Your Cooling Solutions!! Phone: 1-888-580-0202

E-mail: [email protected]


Engineered & manufactured to endure the most difficult of environments and applications. Thermal Edge air conditioners will exceed environmental requirements in applications like

Steel, Food Processing, Petro-Chemical, Cement, Paper & Pulp and Plastics.

Digital Temperature Controller

Programmable set point and temperature controls Visible Error and/or alarm messaging System status indication & keypad lockout function Active Condensate Evaporation System

Constant elimination of condensate Increases unit efficiency by pre-cooling refrigerant Key Design Features Sloped top to allow for water runoff Designed with rigid chassis and seam welded shroud Thoughtful interior design for easy maintenance Narrow body style fits on 12” enclosure Unit Efficiency

Temperature operated blower control reduces power inrush and saves energy

Highly efficient rotary compressor Fully insulated & sealed cabinet Thermal Expansion Valve to maintain cooling capacity

over a broad ambient temperature range Compressor Protection System

High & Low refrigerant cutouts with fault indication Compressor anti short cycle protection Compressor run capacitors reduce power inrush, save

energy and increase compressor life

1000 BTUH Indoor/Outdoor, NEMA Types 12, 4 & 4X Available NE010

11.8” wide

Options: Dry Contact Alarm Capabilities

Open Door Kill Switch

Corrosive Environment Package

Low Ambient Packages

Remote Monitoring Options

Integrated Enclosure Heat System

Model BTU/

Hour Material

Voltage/

Hz.

Running

Amps

Max. Amb

Temperature

H x W x D

Weight (lbs.)

Unit / Ship

NE010-126-12 1000 Powder coated steel 120/1/60 2.69 125°F 22” x 11.8” x 8.5” 52 / 67


NE010-126-4X 1000 Stainless steel 120/1/60 2.69 125°F 22” x 11.8” x 8.5” 52 / 67





2015-10-28


Testing done under controlled conditions. Actual performance may vary


UL File # SA32252


Engineered & manufactured to endure the most difficult of environments and applications. Thermal Edge air conditioners will exceed environmental requirements in applications like Telecom Outside Plant, Off-Grid Solar, Wind & other Battery Powered Electrical Cabinets.

Model BTU/H Material Volts Running Amps

Max. Ambient Temperature

H x W x D Weight (lbs.) Unit / Ship

CS011-D48-12 1000 Powder coated steel 48 VDC 3.7 125°F 17” x 7” x 7” 30 / 43

CS011-D48-04 1000 Powder coated steel 48 VDC 3.7 125°F 17” x 7” x 7” 30 / 43

CS011-D48-4X 1000 Stainless steel 48 VDC 3.7 125°F 17” x 7” x 7” 30 / 43

Digital Temperature Controller Programmable set point and temperature controls Visible Error and/or alarm messaging System status indication & keypad lockout function Active Condensate Evaporation System

Constant elimination of condensate Increases unit efficiency by pre-cooling refrigerant Key Design Features Designed with rigid chassis and seam welded shroud Thoughtful interior design for easy maintenance Narrow body style fits on 7” enclosure Filter free design Unit Efficiency Highly efficient rotary compressor Fully insulated & sealed cabinet Thermal Expansion Valve to maintain cooling capacity

over a broad ambient temperature range Compressor Protection System High & Low refrigerant cutouts with fault indication Compressor anti short cycle protection Compressor motor drive controller eliminates power

inrush, saves energy and increases compressor life

1,000 BTU/H 48 Volt DC Powered Air Conditioner Indoor/Outdoor, NEMA Types 12, 4 & 4X Available CS011-D48

Options: Dry Contact Alarm Remote Controller Open Door Kill Switch Corrosive Environment Package Remote Monitoring Options

THE CS011 USES A UNIQUE 3 COIL DESIGN PROVIDING HIGH CAPACITY COOLING WHILE UTILIZING AIR INTAKE FROM EITHER SIDE. DUAL INTAKE ALLOWS FOR MOUNTING ON A WALL MOUNTED ENCLOSURE ON THE RIGHT OR LEFT

SIDE OF YOUR ENCLOSURE.

7” wide


2015-06-11



UL File # SA32252

0

500

1000

1500

2000

2500

85 95 105 115 125

BTUH

Ambient Temperature (°F)

CS011D48

105

95

85

Return Air

Temperature

(°F)




Model BTU/H Material Volt./Hz. Running Amps


H x W x D Weight (lbs.) Unit / Ship

CS011-126-12 1000 Powder coated steel 120/1/60 2.7 131°F 17” x 7” x 7” 30 / 43

CS011-126-04 1000 Powder coated steel 120/1/60 2.7 131°F 17” x 7” x 7” 30 / 43

CS011-126-4X 1000 Stainless steel 120/1/60 2.7 131°F 17” x 7” x 7” 30 / 43

Digital Temperature Controller Programmable set point and temperature controls Visible Error and/or alarm messaging System status indication & keypad lockout function Active Condensate Evaporation System

Constant elimination of condensate Increases unit efficiency by pre-cooling refrigerant Key Design Features Designed with rigid chassis and seam welded shroud Thoughtful interior design for easy maintenance Narrow body style fits on 8” enclosure Filter free design Unit Efficiency Temperature operated blower control reduces power

inrush and saves energy Highly efficient rotary compressor Fully insulated & sealed cabinet Thermal Expansion Valve to maintain cooling capacity




1,000 BTU/H Indoor/Outdoor, NEMA Types 12, 4 & 4X Available CS011

Options: Dry Contact Alarm Capabilities Open Door Kill Switch Corrosive Environment Package Low Ambient Package Remote Monitoring Options Integrated Enclosure Heater System Redundant System

THE CS011 USES A UNIQUE 3 COIL DESIGN PROVIDING HIGH CAPACITY COOLING WHILE UTILIZING AIR INTAKE FROM EITHER SIDE. DUAL INPUT ALLOWS FOR MOUNTING ON A WALL MOUNTED ENCLOSURE ON THE RIGHT OR LEFT

SIDE OF YOUR ENCLOSURE.

7” wide


2014-03-31

UL File # SA32252 All information subject to change without notice


0

500

1000

1500

2000

2500

85 95 105 115 125 135

BTUH

Ambient Temperature (F)

CS011

105

95

85

Return air Temperature

( F)














11.8” wide






Model BTU/

Hour

Voltage/

Hz.

Running

Amps

Max. Ambient

Temperature

Weight (lbs.)

Unit / Ship

H x W x D

Material

NE015-126-12 1500 120/1/60 3.44 125°F 52 / 67 22” x 11.8” x 8.5” Powder coated steel



NE015-236-12 1500 230/1/60 2.67 125°F 52 / 67 22” x 11.8” x 8.5” Powder coated steel




2015-10-28




UL File # SA32252



















Hazardous Location Units

Redundant Systems

11.8” wide

Model BTU/H Material Volt./Hz. Running

Amps

Max. Ambi-

ent Temper-ature

H x W x D

Weight

(lbs.)Unit / Ship







NE020-486-12 2000 Powder coated steel 480/1/60 0.93 125°F 38” x 11.8” x 9.5” 123 /141




2013-10-30






Programmable set point and temperature controls Visible Error and/or alarm messaging System status indication & keypad lockout function Active Condensate Management System


Pressure operated blower control reduces power inrush and saves energy

Highly efficient Rotary Compressor Fully insulated & sealed cabinet Thermal Expansion Valve to maintain cooling capacity






Model BTU/

Hour Material

Voltage/

Hz.

Running

Amps

Max.

Ambient Temp

H x W x D

Weight (lbs.)

Unit / Ship

CS020-126-12 2000 Powder coated steel 120V/1/60 3.36 131°F 20” x 10” x 10” 42 / 56


CS020-126-4X 2000 304 Stainless 120V/1/60 3.36 131°F 20” x 10” x 10” 42 / 56



CS020-236-4X 2000 304 Stainless 230V/1/60 2.0 131°F 20” x 10” x 10” 45 / 59

Options: Dry Contact Alarm Capabilities Open Door Kill Switch Corrosive Environment Package Low Ambient Packages Remote Monitoring Options Integrated Enclosure Heater System

2000 BTUH Indoor/Outdoor, NEMA Types 12, 4 & 4X Available CS020

10” wide


2015-01-15



0

500

1000

1500

2000

2500

3000

3500

4000

85 90 95 100 105 110 115 120 125 130

BTUH

Ambient Temperature

CS020

105

95

85

Evaporator Temperature

(°F)





















Redundant Systems

11.8” wide

Model BTU/H Material Volt./Hz. Running Max. Ambient H x W x D Weight (lbs.) Unit / Ship











2013-10-30








Highly efficient rotary compressor Temperature operated condenser blower control saves

energy Fully insulated & sealed cabinet Thermal Expansion Valve to maintain cooling capacity


High & Low refrigerant cutouts with fault indication Compressor anti short cycle protection

Compressor motor drive controller eliminates power inrush, saves energy and increases compressor life

4000 BTUH 48 VDC Powered Air Conditioner Indoor/Outdoor, NEMA Types 12, 4 & 4X Available NE040-D48

Options: Dry Contact Alarm

Remote Controller


Corrosive Environment Packages


Redundant Systems

Tamper Resistant Filters

11.8” wide

Model BTU/Hour

Material Voltage/

Hz. Running

Amps Maximum Ambient

H x W x D

Weight (lbs.) Unit / Ship

NE040-D48-12 4000 Powder coated steel 48 VDC 22.3 131°F 35.27” x 11.8” x 9.5” 103 / 120

NE040-D48-04 4000 Powder coated steel 48 VDC 22.3 131°F 35.27” x 11.8” x 9.5” 103 / 120

NE040-D48-4X 4000 Stainless steel 48 VDC 22.3 131°F 35.27” x 11.8” x 9.5” 103 / 120

4000 BTUH 48 VDC Powered Air Conditioner Indoor/Outdoor, NEMA Types 12, 4 & 4X Available

Engineered & manufactured to endure the most difficult of environments and applications. Thermal Edge air conditioners will exceed environmental requirements in applications like Telecom Outside Plant, Off-Grid Solar, Wind & other Battery Powered Electrical Cabinets.


2015-06-11



0

1000

2000

3000

4000

5000

6000

85 90 95 100 105 110 115 120 125 130

BT

UH


NE040-D48

105

95

85

Return Air Temperature

(°F)

UL File # SA32252












4000 BTUH Indoor/Outdoor, NEMA Types 12, 4 & 4X Available

NE040








Redundant Systems

11.8” wide

Model BTU/Hour

Voltage/Hz.

Running Amps

Maximum Ambient

H x W x D


Material

NE040-126-12 4000 120/1/60 5.53 125°F 32” x 11.8” x 9.5” 94 / 111 Powder coated steel


NE040-126-4X 4000 120/1/60 5.53 125°F 32” x 11.8” x 9.5” 94 / 111 Stainless steel








2013-10-30










Temperature operated blower control reduces power in-rush and saves energy

Highly efficient rotary compressor Fully insulated & sealed cabinet Thermal Expansion Valve to maintain cooling capacity over

a broad ambient temperature range Compressor Protection System











Redundant Systems

11.8” wide

Model BTU/Hour

Voltage Phase

Hz.

Running Amps



H x W x D

Material

NE050-126-12 5000 120V/1/60 7.26 125°F 121 / 139 36” x 11.8” x 15.02” Powder coated steel


NE050-126-4X 5000 120V/1/60 7.26 125°F 36” x 11.8” x 15.02” 121 / 139 Stainless steel

NE050-236-12 5000 230V/1/60 3.76 125°F 36” x 11.8” x 15.02” 122 / 140 Powder coated steel



NE050-486-12 5000 480V/1/60 1.44 125°F 44.63” x 11.8” x 15.02” 170 / 189 Powder coated steel


NE050-486-4X 5000 480V/1/60 1.44 125°F 44.63” x 11.8” x 15.02” 170 / 189 Stainless steel


2015-01-22























Redundant Systems

11.8” wide

Model BTU/Hour

Voltage Phase

Hz.

Running Amps



H x W x D

Material

NE060126-12 6000 120V/1/60 7.83 125°F 121 / 139 36” x 11.8” x 15.02” Powder coated steel

NE060126-04 6000 120V/1/60 7.83 125°F 121 / 139 36” x 11.8” x 15.02” Powder coated steel

NE060126-4X 6000 120V/1/60 7.83 125°F 36” x 11.8” x 15.02” 121 / 139 Stainless steel

NE060236-12 6000 230V/1/60 4.80 125°F 36” x 11.8” x 15.02” 122 / 140 Powder coated steel

NE060236-04 6000 230V/1/60 4.80 125°F 36” x 11.8” x 15.02” 122 / 140 Powder coated steel

NE060236-4X 6000 230V/1/60 4.80 125°F 36” x 11.8” x 15.02” 122 / 140 Stainless steel

NE060486-12 6000 480V/1/60 1.80 125°F 44.63” x 11.8” x 15.02” 170 / 189 Powder coated steel

NE060486-04 6000 480V/1/60 1.80 125°F 44.63” x 11.8” x 15.02” 170 / 189 Powder coated steel

NE060486-4X 6000 480V/1/60 1.80 125°F 44.63” x 11.8” x 15.02” 170 / 189 Stainless steel


2014-07-15















8000 BTUH Indoor/Outdoor, NEMA Types 12, 4 & 4X Available

NE080








Redundant Systems

11.8” wide

Model BTU/Hour

Voltage Phase

Hz.

Running Amps



H x W x D

Material









NE080-486-4X 8000 480V/1/60 1.80 125°F 44.63” x 11.8” x 15.02” 170 / 189 Stainless steel


2014-07-15





Model BTU/Hour

Voltage Phase

Hz.

Running Amps

Max Ambient

H x W x D Weight (lbs) Unit / Ship

Material

HC101-126-12 10,000 120/1/60 19.40 131°F 48” x 15.86” x 15” 162 / 183 Powder coated steel


HC101-126-4X 10,000 120/1/60 19.40 131°F 48” x 15.86” x 15” 162 / 183 Stainless steel



HC101-236-4X 10,000 230/1/60 8.20 131°F 48” x 15.86” x 15” 165 / 186 Stainless steel

HC101-486-12 10,000 480/1/60 3.93 131°F 56.6” x 15.86” x 15” 222 / 244 Powder coated steel

HC101-486-04 10,000 480/1/60 3.93 131°F 56.6” x 15.86” x 15” 222 / 244 Powder coated steel

HC101-486-4X 10,000 480/1/60 3.93 131°F 56.6” x 15.86” x 15” 222 / 244 Stainless steel


Programmable set point and temperature controls Visible Error and/or alarm messaging System status indication with keypad lockout function Active Condensate Evaporation System

Constant elimination of condensate Increases unit efficiency by pre-cooling refrigerant

Key Design Features Sloped top to allow for water runoff Designed with rigid chassis and seam welded shroud Thoughtful interior design for easy maintenance Unit Efficiency


Highly efficient rotary compressor Fully insulated & sealed cabinet Thermal Expansion Valve to maintain cooling capacity over a

broad ambient temperature range

Compressor Protection System

High & Low refrigerant cutouts with fault indication Compressor anti short cycle protection Compressor run capacitors reduce power inrush, save energy

and increase compressor life



10,000 BTUH Indoor/Outdoor, NEMA Types 12, 4 & 4X Available

Options:

Dry Contact Alarm Capabilities



Low Ambient Package


Integrated Enclosure Heater System

Hazardous Location Package

Redundant System

HC101


2013-10-30


0

2000

4000

6000

8000

10000

12000

14000

16000

18000

85 90 95 100 105 110 115 120 125 130

BTU

H

Ambient Temperature

HC101

105

95

85


(°F)


UL File # SA32252
















Options:




Low Ambient Package




Redundant System

HC121

Model BTU/Hour

Voltage Phase Hz.

Running Amps


H x W x D


Material

HC121-126-12 12,000 120/1/60 19.40 131°F 48” x 15.86” x 15.03” 162 / 183 Powder coated steel


HC121-126-4X 12,000 120/1/60 19.40 131°F 48” x 15.86” x 15.03” 162 / 183 Stainless steel




HC121-486-12 12,000 480/1/60 3.93 131°F 56.6” x 15.86” x 15.03” 222 / 244 Powder coated steel

HC121-486-04 12,000 480/1/60 3.93 131°F 56.6” x 15.86” x 15.03 222 / 244 Powder coated steel

HC121-486-4X 12,000 480/1/60 3.93 131°F 56.6” x 15.86” x 15.03 222 / 244 Stainless steel


2013-10-30



0

2000

4000

6000

8000

10000

12000

14000

16000

18000

20000

22000

85 90 95 100 105 110 115 120 125 130

BTU

H


HC121

105

95

85


UL File # SA32252
















Options:




Low Ambient Package




Redundant System

HC151

Model BTU/Hour Voltage

Phase/Hz.

Running

Amps

Max. Ambi-

ent Temper-ature

H x W x D

Weight

Unit / Ship Material






HC151-486-4X 15,000 480/1/60 5.41 131°F 56.6” x 15.86” x 15.03” 234 / 256 Stainless steel


2013-10-30



0

5000

10000

15000

20000

25000

85 90 95 100 105 110 115 120 125 130

BTU

H

Ambient Temperature

HC151

105

95

85


(°F)

UL File # SA32252















20,000 BTUH Indoor/Outdoor, NEMA Types 12, 4 & 4X Available HC201

Options:




Low Ambient Package




Redundant System

Model BTU/Hour

Voltage/ Phase/Hz.

Running Amps


H x W x D


Material

HC201-236-12 20,000 230/1/60 15.3 131°F 56.09” x 23” x 15.03” 205 / 226 Powder coated steel

HC201-236-04 20,000 Powder coated steel 230/1/60 15.3 131°F 56.09” x 23” x 15.03” 205 / 226

HC201-236-4X 20,000 Stainless steel 230/1/60 15.3 131°F 56.09” x 23” x 15.03” 205 / 226



HC201486-4X 20,000 480/1/60 7.7 131°F 65.7” x 23” x 15.03” 320 / 342 Stainless steel


2015-03-13




0

5000

10000

15000

20000

25000

85 90 95 100 105 110 115 120 125 130

BTU

H

Ambient Temperature

HC201

105

95

85


(°F)

Documents

UL LISTED ENCLOSURE AIR CONDITIONERS - info.thermal-edge…info.thermal-edge.com/hubfs/docs/TEI_Air_Conditioners_Full_Line... · 2. Improved refrigerant return to the compressor assures