Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Page 1 of 6
UGT RACE LCD V2 DATASHEET
Revision Date: 15/07/2018
Contents
Device Description: 2
Device Details: 2
Supported Input Devices: 2
Absolute Maximum Ratings 3
Recommended Operating Conditions 3
Characteristics Based On Operating Conditions 4
LED/LCD Display Information 4
Race LCD Dimensions 5
Race LCD Rear PCB View 6
Technical Support:
Sales:
www.ultimategametech.com
Page 2 of 6
Device Description:
The Ultimate Game Tech RACE LCD V2 is a state of the art motorsport simulation
device which provides access to vehicle telemetry and race information via a single
USB cable. This information is then displayed on the device LCD, Shift Light LEDs,
Flag LEDs and up to 6 additional LEDs configurable by software.
The Ultimate Game Tech RACE LCD V2 provides a range of input options including
digital inputs for push buttons or toggle switches; analog inputs for potentiometers or
hall effect sensors; rotary switches via analog input to provide between 2 and 16
rotary positions with only 1 data connection (VCC and GND also required) and
support for 6 Encoders.
Device Details:
● 4.3” LCD TFT display module. 480 x 272 Resolution, RGB 65K true to life
colours
● 21 On board LEDs with fine grained independent colour brightness
adjustment (Red, Green, Blue, Yellow)
● 6 Additional LED connections for extra user configurable LEDs
● LCD display supports all available Windows fonts via download options
● USB 2 Full Speed Connectivity
● Built in micro USB socket
● Solder pads for direct wired in connection of USB Cable
● Sound output via solder pads (requires external amp, speaker and power)
● On board 4Gb data storage for images, fonts and sounds
● 4x mounting tabs with 4.2mm holes for mechanical mounting using M4 screws
● Overall dimensions: 127.6mm(w), 13.3mm(d), 78.8mm(h)
Supported Input Devices:
● 30 Push Button inputs
● 4 Hat Switch inputs
● 8 Analog inputs with 12 bit resolution and configurable sensitivity
● 5 Rotary Switch inputs with 2 to 16 positions possible, multiplexed with Analog
inputs and configurable via PC software
● 6 Encoder inputs supporting Quadrature encoders and 1 bit Encoders
All inputs are wired directly to the back of the device PCB via solder pads with GND
and VCC connections shared between all inputs. Pre-wired versions are available on
request.
UG
T R
aceL
CD
V2
ww
w.u
ltim
ate
gam
ete
ch
.co
m
Page 3 of 6
Absolute Maximum Ratings
Operating ambient temperature...................................................... -5°C to +70°C
Storage temperature....................................................................... -10°C to +80°C
Voltage on any input pin with respect to GND................................ 0V to 3.6V
Voltage on VCC with respect to GND............................................ 0V to 3.6V
Maximum current sunk/sourced by any connection....................... 20.0mA
Maximum current sunk/sourced by all connections........................ 200.0mA
NOTE: Stresses above those listed here may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or
any other conditions beyond those indicated in the recommended operation listings
of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.
Recommended Operating Conditions
Parameter Conditions Min Typ Max Units
Supply Voltage (VCC) Stable external supply required 4.6 5.0 5.5 V
Operating Temperature - 0 - + 60 °C
Input Low Voltage All pins 0 - 0.2 V
Input High Voltage All pins 0.8 - 3.3 V
Operational Delay Power-Up or External Reset 500 - 3000 ms
UG
T R
aceL
CD
V2
ww
w.u
ltim
ate
gam
ete
ch
.co
m
Page 4 of 6
Characteristics Based On Operating Conditions
Parameter Conditions Min Typ Max Units
Supply Current Max Contrast, Max LED Brightness - 500 - mA
Device Endurance Hours of operation, to when LCD display is 50% original brightness
30000 - - Hours
CLB Hardness Cover Lens Bezel Glass Hardness - 6 - H
Red LED Wavelength Max Brightness
620 1500
- -
640 6000
D(nm) mcd
Green LED Wavelength Max Brightness
500 4000
- -
530 9000
D(nm) mcd
Blue LED Wavelength Max Brightness
455 2750
- -
475 7000
D(nm) mcd
Yellow LED Wavelength Max Brightness
585 2750
- -
595 6500
D(nm) mcd
LED/LCD Display Information
Parameter Conditions Specification
LED Viewing Angle - 25 Degrees +-10%
LCD Type - TFT Transmissive LCD
LCD Size - 4.3” Diagonal
LCD Resolution - 480x272 (Landscape/Wide Viewing)
LCD Brightness Max Contrast 500 cd/m2
LCD Contrast Ratio Typical 500:1
LCD Viewing Angles - 70 Degrees Left, Above, Right 60 Degrees Below
LCD Viewing Direction
- 12 o’clock Display (Optimal viewing is from above)
LCD Backlighting A B
2x5 Parallel LED’s 2x8 Parallel LED’s
LCD Pixel Pitch - 0.198 x 0.198mm (Square pixels)
LCD Pixel Density 1 row in 25.4mm 128 DPI/PPI
UG
T R
aceL
CD
V2
ww
w.u
ltim
ate
gam
ete
ch
.co
m
Page 5 of 6
Race LCD Dimensions
Unless otherwise specified Dimensions are in millimetres. Tolerances 0.5mm
UG
T R
ace
LC
DV
2
w
ww
.ult
ima
teg
am
ete
ch
.co
m
Page 6 of 6
Race LCD Rear PCB View
ww
w.u
ltim
ate
gam
ete
ch
.co
m
ww
w.u
ltim
ate
gam
ete
ch
.co
m
UG
T R
ace
LC
DV
2
w
ww
.ult
ima
teg
am
ete
ch
.co
m