Upload
curtis-jasper-pierce
View
218
Download
0
Tags:
Embed Size (px)
Citation preview
UED at ASTA: LLRF and triggers
• Need < 100 fs jitter• Currently we measure > 500 fs RMS phase noise
in 10 Hz to 10 MHz bandwidth at 476 MHz• Excessive phase noise is due to the dirty
reference from LCLS (which conveniently provides triggers synced to PG&E zero crossing)
• Suggested improvements:– Import clean 119/476 MHz from linac– Local source with local trigger generation
Courtesy J. Dusatko
Fiber from LCLS
476 MHz from PLL noise measurement
Locked 562 fsec RMS jitter
Unlocked 50 fsec RMS jitter
Clean 119 MHz from LI30
• Relic of E-144 FFTB experiment: TW laser synced to beam time with 0.5 ps stability– Recomission LI30 RF fiber optic diode laser
transmitter (30 mW laser hazard)– Adapt to standard SLC fiber – Fiber patch LI30 to B44– Relocate the receiver (from B407)
• No need for a new timing system!
Local source, local triggers(cut the cord)
• The unlocked PLL has a relatively clean 476 MHz source (LCLS comparable)
• Still need triggers: Rebuild/borrow spare HW to reproduce LCLS fiducial generation in the klystron test lab
• Independence from LCLS timing outages
Courtesy J. Dusatko, D. van Winkle
LINAC triggers
Courtesy J. Dusatko
Figure 1: ASTA phase (red) and amplitude (blue) over a 6 hour period.