U stand-alone merging unit, KEMA-certified to the IEC 61850-9-2LE process bus standard. The output of conventional instrument transformers (CTs and VTs) can be digitized in the yard with this compact, withdrawable and accurate device. The MU Agile AMU is a cost-effective solution, desi...MoreEIG Releases IEC 61850 Communicating Power MetersElectro Industries/GaugeTech has released a family of power meters designed to automate utility substations using IEC 61850 protocol. These meters provide critical metering as well as basic feeder telemetry for all aspects of Substation Automation. EIGs Nexus 1500 meter is designed to measure and report using the IEC61000-4-30 Class A standards. It provides full EN50160 power qualit...MoreNew Geomagnetically Induced Current MonitorQUALITROL LLC announced the release of a new online, real time monitor to correlate changes in transformer health under geomagnetic storms. Geomagnetically induced current (GIC) may affect key assets such as: Large power transformers Motors on pipelines with heavier loading Outages and unexpected damage Qualitrols GIC monitor, installed on transformers - and used in co...MorePSCS TMNR Electrics Power Stability Control System NR Electrics power stability control system relies on event-based control instead of response-based control to prevent blackouts. The system utilizes 24 samples per cycle via dedicated stability controllers to achieve fast and smart balance between power generation and consumption in less than 100ms. Recently, NR