Embed Size (px)
Citation preview
3560 C, D, E
PULSE™, the Multi-analyzer System Type
3560, is a versatile, task-oriented analysis
system. It provides the platform for a
range of PC-based measurement solutions
from Brüel & Kjær.Brüel & Kjær.
A PULSE system consists of a PC with LAN
interface, PULSE software, Microsoft®
Windows NT® or Windows® 2000 2000
operating system, Microsoft® Office, and
data acquisition front-end hardware.
Type 3560 C is a portable system powered
by internal batteries or an external DC
supply (AC using adaptor). The system can AC using adaptor). The system can
contain one input/output module.
Type 3560 D is a portable multichannel
system powered by an external DC supply
(AC using adaptor). The system can
contain up to 5 input/output modules.
Type 3560 E is a multichannel system
powered by AC. The system is suitable for
rack mounting and can contain up to 8
input/output modules.
Up to 10 front-ends can be combined into
one measurement system with up to 128
input channels.
This System Data describes the hardware
available for Type 3560 C , D and E. The
software available is described separately.
IDAe Hardware Configurations for PULSE Version 6.1urations for PULSE Version 6.16.1— Types 3560C, 3560D and 3560Ed 3560E
2
Contents
Features and Uses ...................................................................................................................... 3Introduction ............................................................................................................................... 3PULSE Software and Applications ............................................................................................. 4Hardware Overview verview ................................................................................................................... 5Reliable Design .......................................................................................................................... 5Portable Data Acquisition System – Type 3560 C 60 C ..................................................................... 6Data Acquisition System – Type 3560 D .................................................................................... 7Data Acquisition System – Type 3560 E (Tentative) ................................................................. 810 Mbit LAN Interface Module – Type 7533 33 ............................................................................. 9100 Mbit LAN Interface Module – Type 7536 6 (Tentative) ...................................................... 106/1-ch. Input/Output Module –�Type 3032 A, 3032 B A, 3032 B ............................................................. 11
Input .................................................................................................................................... 11Output ................................................................................................................................. 12
Generator, 4/2-ch. Input/Output Module – Type 3109 9 .......................................................... 13Input .................................................................................................................................... 13Output ................................................................................................................................. 14
Generator, 2/1-ch. Input/Output Module – Type 3110 (Tentative)ve) ....................................... 15Input .................................................................................................................................... 15Output ................................................................................................................................. 16
Sound Intensity Probe Kit – Type 3599 ................................................................................... 17PULSE and Intelligent Data Acquisition System Type 3561 LSE and Intelligent Data Acquisition System Type 3561 ................................................... 177
SPECIFICATIONSCompliance with Standards .................................................................................................... 18Specifications –�PULSE, the Multi-analyzer System Type 3560 C/D -analyzer System Type 3560 C/D ........................................ 19Specifications – Type 3560 C Front-end .................................................................................. 19
Ordering Information Type 3560 C Front-end .................................................................. 19Specifications – Type 3560 D Front-end D Front-end .................................................................................. 20
Ordering Information Type 3560 D Front-end .................................................................. 20Specifications – Type 3560 E Front-end (Tentative) ............................................................... 21
Ordering Information Type 3560 E Front-end (Tentative) ............................................... 21Specifications – 10 Mbit LAN Interface Module Type 7533 ................................................... 21
Ordering Information 7533 ............................................................................................... 22Specifications – 100 Mbit LAN Interface Module Type 7536 AN Interface Module Type 7536 (Tentative) .............................. 22
Ordering Information 7536 (Tentative) ............................................................................ 23Specifications – 6/1-ch. Input/Output Module Type 3032 A, 3032 B h. Input/Output Module Type 3032 A, 3032 B ..................................... 23
Ordering Information 3032 mation 3032 ............................................................................................... 24Specifications – Generator, 4/2-ch. Input/Output Module Type 3109 Type 3109 .................................. 25
Ordering Information 3109 ............................................................................................... 26Specifications – Generator, 2/1-ch. Input/Output Module Type 3110 /1-ch. Input/Output Module Type 3110 (Tentative) ............... 26
Ordering Information – Portable PULSE Systems 3560 C, 3560 D formation – Portable PULSE Systems 3560 C, 3560 D .................................... 28
Overview of Portable PULSE Type 3560 C verview of Portable PULSE Type 3560 C ............................................................................... 299Overview of Multichannel Portable PULSE Type 3560 D, 7-module configuration 3560 D, 7-module configuration ............. 30Overview of Multichannel PULSE Type 3560 E, 10-module configuration PULSE Type 3560 E, 10-module configuration ........................... 31
Features and Usesd Uses
USES ❍ General noise and vibration analysis and related post-processing
❍ Multiframe systems comprising up to 10 front-ends with synchronous sampling 10 front-ends with synchronous sampling between front-ends for real-time measurements on up to 128 channels:28 channels:
– Type 3560 C: 2 modules (up to 7 input and 2 generator output channels)dules (up to 7 input and 2 generator output channels)– Type 3560 D: 7 modules (up to 31 input and 10 generator output channels)3560 D: 7 modules (up to 31 input and 10 generator output channels)channels)– Type 3560 E: 10 modules (up to 49 input and 16 generator output channels)dules (up to 49 input and 16 generator output channels)
❍ Signal and system analyses using PULSE software for:ystem analyses using PULSE software for:
� General Noise and Vibration Measurement� Product Noise Measurement� Sound Quality Analysis– Sound Power� Noise Source Identificationfication� Acoustic Material Testing� Structural Dynamics� Machine Analysishine Analysis
FEATURES ❍ PULSE runs under the Microsoftcrosoft� Windows NT� or Windows� 2000 operating systemsms
❍ Analysis Engine upgrade software � use your standard PC for real-time signal analysisC for real-time signal analysis
❍ Automatic detection of front-end hardware and transducers � supports IEEE P1451.4-IEEE P1451.4-capable transducers with TEDS (Transducer Electronic Data Sheet)DS (Transducer Electronic Data Sheet)
❍ Signal conditioning for noise and vibration transducers including CCLD and Falcon bration transducers including CCLD and Falcon Range� Microphonesphones
❍ LAN interface (wireless LAN possible) allows the front-end to be placed close to the test object and reduces transducer cable lengthject and reduces transducer cable length
❍ Rugged design for industrial use
❍ Internal battery (3560 C only)/external DC operated acquisition unit for field use560 C only)/external DC operated acquisition unit for field useisition unit for field use
❍ Hot swap of batteries during measurement (3560 C only)60 C only)
Introductionction
PULSE, the Multi-analyzer System Type 3560, is a versatile, task-oriented analysis systemulti-analyzer System Type 3560, is a versatile, task-oriented analysis systemk-oriented analysis systemfor noise and vibration analysis. It provides the platform for a range of PC-basedC-basedmeasurement solutions from Brüel & Kjær.ær.
A Type 3560 C/D/E system consists of a PC with LAN interface, PULSE software, Windowsconsists of a PC with LAN interface, PULSE software, WindowsE software, WindowsNT� or Windows� 2000, Microsoft� Office and IDAOffice and IDAe-based data acquisition front-endhardware1. A system can contain up to 128 input channels located in up to 10 front-ystem can contain up to 128 input channels located in up to 10 front-
1. IDAe � Enhanced Intelligent Data Acquisition-based front-end. Portable PULSE is the first PULSE analyzer that uses IDAe modules. The term “intelligent” refers to the growing range of unique features including support of transducers with standardised built-in transducer data (TEDS). These features give fast and reliable setup and documentation of the entire measurement chain � from the transducer to the analysis result. The key features of IDAe are:� Input and output channels are fully conditioned for microphones, sound intensity probes, CCLD trans-
ducers and other transducers acting as voltage sources– Selectable high-pass filters and full overload detection, including out-of-band overload and indication of
incorrect conditioning for the connected transducer
3
ends. Part of the PULSE software is an Analysis Engine that allows the system analysisPart of the PULSE software is an Analysis Engine that allows the system analysism analysispower to be scaled up without the need for extra hardware.
The input/output conditioning modules perform pre-processing and digitise the trans-/output conditioning modules perform pre-processing and digitise the trans-ducer signals. The components available for use in Type 3560 C/D/E PULSE systems are3560 C/D/E PULSE systems arearegiven in the Specifications. Further information on the input/output modules is givenin Table 1.ble 1.
Table 1 The types of module used in the Type 3560 C, 3560 D and 3560 E front-ends
PULSE Software and Applicationsftware and ApplicationsApplications
The base software for a PULSE system is Noise and Vibration Analysis Type 7700,m is Noise and Vibration Analysis Type 7700,00,although separate FFT and CPB licenses are available as FFT Analysis Type 7770 andvailable as FFT Analysis Type 7770 andCPB Analysis Type 7771. On this base, you can install further PULSE software such asOn this base, you can install further PULSE software such asware such asData Recorder Type 7701 and a number of other application packages. For descriptionsnd a number of other application packages. For descriptionsof the PULSE software please refer to the separate System Data, BU 0229.ULSE software please refer to the separate System Data, BU 0229.0229.
Analysis EngineNoise and Vibration Analysis Type 7700 pe 7700 includes an Analysis Engine. This is the partof the PULSE software that enables scalable real-time signal analysis f the PULSE software that enables scalable real-time signal analysis ysis using the PC’s CPU.By adding more Analysis EngineAnalysis Engine Upgrade Licenses you can unlock more analysis powerwithout changing any hardware and without the need for dedicated DSPs (see SystemPs (see SystemData BU 0229 for details).).
Type Product Name
Frequency Range Inputs/Outputs No. in Front-end
Lower Upper SimultaneousChannels Input Type 3560 C 3560 D 3560 E
3109Generator,
4/2-ch. Input/Output Module
0 Hz 25.6 kHzkHz4 Input
2 GeneratorOutput
Direct/CCLD1
Mic. Preamp.1 TachoTacho
Up to 1of these
3modules Up to 5of these
4 modules
Up to 8of these
4 modules
3032 6/1-ch. Input/Output ModuleModule 0 Hz 25.6 kHz2 6 Input2
1 Output
Direct/CCLD1
Mic. Preamp.amp.2 Tacho
UA1365 Blank Module –
31103Generator,tor,
2/1-ch. Input/Output Module
0 Hz 102.4 kHz2 Input
1 GeneratorOutput
Direct/CCLD1
Mic. Preamp.Preamp.1 Tacho
–
7533 10 Mbit LANInterface Moduledule 0 Hz 25.6 kHz 1 Input
DirectCCLD1
1 Tacho1
1 of these2 modules
1 of these2 modules
75363 100 Mbit LANInterface Module No input/output channels –
1. Constant Current Line Drive for DeltaTron® and ICP® Accelerometers or Microphone Preamplifier2. 4 Input/1 Output or 6 Input/0 Output @ 25.6 kHz; 6 Input/1 Output @ 12.8 kHz. Note: Only sine wave output available3. Type 3110 requires Type 7536
4
Hardware Overviewiew
Fig. 1 Overview of the components available for use in a Type 3560 Multi-Multi-analyzer System with LAN Interface (Type 3560 E not 3560 E not shown)
See also Fig. 2 to Fig. 4 for more details of system configurations.
Reliable Designgn
EnvironmentalTo survive the harsh electrical environment found in, e.g., cars, Portable PULSE hasvive the harsh electrical environment found in, e.g., cars, Portable PULSE hasE hasspecifications that exceed the European EMC immunity requirements. ISO 7637quirements. ISO 7637�1 “RoadVehicles � Electrical disturbance by conduction and coupling” requirements are met.ments are met.Mechanical robustness is equally high and meets MIL�STD�810C and IEC 68�2�6 stand-ards.
Since all portable PULSE systems are built for outdoor use, they meet strict requirementsportable PULSE systems are built for outdoor use, they meet strict requirementshey meet strict requirementsfor temperature and humidity. The operating temperature range extends from �10 to0 to+50�C (+14 to 122�F). Type 3560 C will withstand rain if kept with the front panel facingill withstand rain if kept with the front panel facingupwards and the protection cover in place.
010057/2
PULSE Software
Modules
Generator,4/2-ch.
Input/OutputModule
3109
4/2-ch.Input/Output Module
Type 3109
3 4
1 2
Input
Input
Output 2
Output 1
MeasuringStop
Overload
25kHz25kHzBrüelel B K7/6-'897/6-'89& Kjær
• Microsoft® Windows NT®/ Windows®2000• Microsoft®Office• Noise and Vibration Analysis 7700• FFT Analysis 7770• CPB Analysis 7771• Analysis Engine 7707
• Data Recorder 7701• Order Analysis 7702• Vold-Kalman Order Tracking Filter 7703• Time Capture 7705• Viewer License 7709• Multiple-Input Multiple-Output Analysis 7764• SSR Analysis 7772• Envelope Analysis 7773• PULSE Interface to Sony® SIR-1000 7774• Spatial Transformatiom of Sound Fields Component 7780
Ext. Int.
Clock In
Aux.I/O
Sync. In
Clock Out
Sync. OutRx
Tx LAN
RS-232LAN Interface Module
Type 7533
!
Input 0Error
Clock
Sync.
Power on/off Control
On Off
10Mbit10MbitBrüelel B K7/6-'897/6-'89& Kjær
6/1-ch.Input/Output
Module3032A
10MbitLAN Interface
Module7533
6/1-ch.Input/Output
Module3032B
6/1-ch.Input/Output Module
Type 3032B
Measuring
Output
25kHzBrüel B K7/6-'89& Kjær
Input1-6
1
2
3
4
5
6
Input
Input
Input
Input
Input
Input
Active/Overload
6/1-ch.Input/Output Module
Type 3032A
Measuring
Output
25kHzBrüel B K7/6-'89& Kjær
Input
1
2
Tacho
Input
3
4
Input
5
6
PC
3560C
PortableUnit 2827
LAN
Bat
tery
stat
us
On
/Off
Follo
w/E
xt. p
ow
er
Bat
tery
stat
us
Ext.
Po
wer
10-3
2V!
Ethernet SwitchUL0190
Multiple Front-endsSingle Front-end
PC
Bat
tery
stat
us
On
/Off
Follo
w/E
xt. p
ow
er
Bat
tery
stat
us
Ext.
Po
wer
10-3
2V!
Bat
tery
stat
us
On
/Off
Follo
w/E
xt. p
ow
er
Bat
tery
stat
us
Ext.
Po
wer
10-3
2V!
PortableUnit 2827
AO1449 (1m)
AO0451 (0.2m)AO0158 (3m)WL0235 (xm)
2x AO1450 (2m)
AO1450 (2m)
3560C
3560D
Power-Supply ModuleType 2826
Error
Brüel B K7/6-'89& Kjær
On/Off
Ext. Supply
Live Fuse 10 A
Ground Fuse 10 A
Ext. Supply
Follow Ext. Power
!10-32V
Enclosure KK0050Power Supply 2826
Power-Supply ModuleType 2826
Error
Brüel B K7/6-'89& Kjær
On/Off
Ext. Supply
Live Fuse 10 A
Ground Fuse 10 A
Ext. Supply
Follow Ext. Power
!10-32V
Enclosure KK0050Power Supply 2826
Bat
tery
stat
us
On
/Off
Follo
w/E
xt. p
ow
er
Bat
tery
stat
us
Ext.
Po
wer
10-3
2V!
PortableUnit 2827
Mixed 3560C/D
AQ0643
Blank ModuleUA1365
LAN Interface ModuleType 7536
100Mbit100MbitBrüelel B K7/6-'897/6-'89& Kjær
100MbitLAN Interface
Module7536
2/1-ch.Input/Output Module
Type 3110
Measuring
Overload
25kHzBrüel B K7/6-'89& Kjær
Monitor
Input
Generator,2/1-ch.
Input/OutputModule
3110
1 2
Output
5
Portable PULSE –ULSE – Type 3560 Ce 3560 C
USES
❍ Portable data acquisition unit for PULSEULSE
FEATURES
❍ Houses one interface module and one input/output module
❍ Robust casing for industrial and hard everyday use
❍ Rain cover for front panel allows passage of cables
❍ Battery operated or DC DC powered (10 – 32 V)
❍ Cooling fans can be turned off for silent operation (auto-restart if too hot)ans can be turned off for silent operation (auto-restart if too hot)
IntroductionType 3560 C is a portable data acquisition system with a battery/DC powered Type 2827560 C is a portable data acquisition system with a battery/DC powered Type 2827with a battery/DC powered Type 28277power supply unit. It can hold one 10 Mbit LAN Interface Module Type 7533 with 1 inputLAN Interface Module Type 7533 with 1 input533 with 1 inputchannel, and one input/output module. The interface module handles communicationwith the PC while the input/output module handles measurement inputs. Input/OutputPC while the input/output module handles measurement inputs. Input/Outputmodules available are:ble are:
Type 3032 A, 3032 B: 6/1-ch. Input/Output Moduleut/Output ModuleType 3109: 4/2-ch. Input/Output Modulech. Input/Output ModuleUA 1365:65: Blank Module
Power Supplywer SupplyType 2827 can either be powered by two internal Nickel-Metal Hydride batteries or fromcan either be powered by two internal Nickel-Metal Hydride batteries or froms or froma 10 � 32 V DC power supply. An external 100 n external 100 � 240 V AC mains supply unit is included.cluded.
When batteries are used1, indicators on each side of the front panel indicate the con-dition of the batteries, allowing hot swap without interrupting measurement. Whenconnected to an external DC supply, the batteries are charged automatically.xternal DC supply, the batteries are charged automatically.matically.
The unit can be switched on and off from the front panel or, when using more than onefront-end in one system, the on/off function can be controlled by another front-end/off function can be controlled by another front-endusing the Multiframe Control signal. A third possibility is to follow an external DC powerA third possibility is to follow an external DC powersupply, so that it switches on when the supply is connected.ches on when the supply is connected.
Silent Operation, CoolingDuring operation, fans keep the temperature of the unit within safety limits. In meas-In meas-urement situations where the fan noise (32 dB at ambient temperatures of 22�C [72�F])can influence measurement results, the fans can be switched off from the PULSE soft-off from the PULSE soft-ware. If overheating threatens, the fans are automatically turned on again.cally turned on again.
DC OutputTo provide power for accessories such as a LAN switch or wireless LAN for intercon-AN switch or wireless LAN for intercon-necting more front-ends, the back panel is provided with a 5 and 12 V DC output (LEMOpanel is provided with a 5 and 12 V DC output (LEMO(LEMO
1. Batteries are not included.
6
FGG.00.302 connector) with fuse. Cables for these accessories must be ordered sepa-ith fuse. Cables for these accessories must be ordered sepa-rately.
Multichannel Portable PULSE – Type 3560 Dultichannel Portable PULSE – Type 3560 Drtable PULSE – Type 3560 DSE – Type 3560 D60 D
USES
❍ Multichannel portable data acquisition unit for PULSEPULSE
FEATURES
❍ Houses Power Supply Type 2826, one ne interface module and up to 5 input/output modules
❍ Robust casing for industrial and hard everyday useyday use
❍ Powered by external DC or AC/DC convertorvertor
❍ Cooling fans can be turned off for silent operation (auto-restart if too hot)
IntroductionductionType 3560 D is a data acquisition system comprising a frame that contains 7 modules.ype 3560 D is a data acquisition system comprising a frame that contains 7 modules.frame that contains 7 modules.One of these must be the DC Power Supply Unit Type 2826, and one must be a 10 MbitPower Supply Unit Type 2826, and one must be a 10 Mbitmust be a 10 MbitLAN Interface Module Type 7533 or a 100 Mbit LAN Interface Module Type 7536. Thele Type 7533 or a 100 Mbit LAN Interface Module Type 7536. TheN Interface Module Type 7536. The6. Theremaining 5 modules can be chosen from:
Type 3032 A, 3032 B:pe 3032 A, 3032 B: 6/1-ch. Input/Output ModuleoduleType 3109: 4/2-ch. Input/Output ModuleOutput ModuleType 3110: 2/1-ch. Input/Output Modulenput/Output Module1
UA 1365: Blank Moduleank Module
Power SupplyPower Supply Unit Type 2826 can be powered from a 10 826 can be powered from a 10 � 32 V DC power supply. AnDC power supply. Anexternal 100 � 240 V AC mains supply unit, ZG 0430, is provided.V AC mains supply unit, ZG 0430, is provided.ovided.
The unit can be switched on and off from the front panel or, when using more than onefront-end in one system, the on/off function can be controlled by another front-endystem, the on/off function can be controlled by another front-endusing the Multiframe Control signal. A third possibility is to follow an external DC powerA third possibility is to follow an external DC powersupply, so that it switches on when the supply is connected.ches on when the supply is connected.
Silent Operation, CoolingCoolingDuring operation, fans keep the temperature of the unit within safety limits. In meas-In meas-urement situations where the fan noise (30 dB at ambient temperatures of 2222�C [72�F])will influence measurement results, the fans can be switched off from the PULSE soft-d off from the PULSE soft-ware. If overheating threatens, the fans are automatically turned on again.utomatically turned on again.
1. Type 3110 requires 100 Mbit LAN Interface Module Type 7536
7
DC OutputTo provide power for accessories such as a LAN switch or wireless LAN, the back panelLAN switch or wireless LAN, the back panelis provided with a 5 and 12 V DC output (LEMO FGG.00.302 connector) with fuse. Cables5 and 12 V DC output (LEMO FGG.00.302 connector) with fuse. CablesO FGG.00.302 connector) with fuse. Cablesablesfor these accessories must be ordered separately.
Multichannel PULSE – Type 3560 Ehannel PULSE – Type 3560 EE – Type 3560 E0 E (Tentative))
USES
❍ Multichannel data acquisition unit for PULSE
FEATURES
❍ Comprises Power Supply Type 2826, one 826, one interface module and up to 8 input/output modules
❍ Powered by external DC or AC/DC y external DC or AC/DC convertor
❍ Optional Rack Mounting Enclosure Mounting Enclosure KQ 0155 and Fan Unit UH 1031Unit UH 1031
IntroductionType 3560 E is a rack-mounted data acquisition system comprising 10 modules. One ofk-mounted data acquisition system comprising 10 modules. One ofOne ofthese must be the DC Power Supply Unit Type 2826, and one must be a 10 Mbit LANy Unit Type 2826, and one must be a 10 Mbit LANMbit LANInterface Module Type 7533 or a 100 Mbit LAN Interface Module Type 7536. The remain-pe 7533 or a 100 Mbit LAN Interface Module Type 7536. The remain-face Module Type 7536. The remain-n-ing 8 modules can be chosen from:
Type 3032 A, 3032 B:3032 A, 3032 B: 6/1-ch. Input/Output ModuleduleType 3109: 4/2-ch. Input/Output ModuleModuleType 3110: 2/1-ch. Input/Output ModuleOutput Module1
UA 1365: Blank Modulek Module
The system is provided with a 199� Rack Mounting Kit, as shown above. A 19A 19� RackEnclosure KQ 0155 and Fan Unit UH 1031 are available to allow use of Type 3560 E as ad Fan Unit UH 1031 are available to allow use of Type 3560 E as aType 3560 E as astand-alone unit.
Power SupplySupplyPower Supply Unit Type 2826 can be powered from a 10 Supply Unit Type 2826 can be powered from a 10 d from a 10 � 32 V DC power supply. Any. Anexternal 100 � 240 V AC mains supply unit, WB 1436, is available.WB 1436, is available.
The unit can be switched on and off from the front panel or, when using more than oned on and off from the front panel or, when using more than onefront-end in one system, the on/off function can be controlled by another front-endusing the Multiframe Control signal. A third possibility is to follow an external DC powerMultiframe Control signal. A third possibility is to follow an external DC powery is to follow an external DC powersupply, so that it switches on when the supply is connected.
CoolingThe front-end must be equipped with an external fan unit to keep the temperaturemust be equipped with an external fan unit to keep the temperaturewithin safety limits.
1. Type 3110 requires 100 Mbit LAN Interface Module Type 7536
8
10 Mbit LAN Interface Module –AN Interface Module –Module – Type 7533pe 7533
USES
❍ Interfacing an IDAe-based Data Acquisition Front-end to a PULSE System via LAN (Local Area LSE System via LAN (Local Area Network)
FEATURES
❍ Sets up and transmits data from input modulesup and transmits data from input modules
❍ Provides sampling clock for the input modules
❍ Provides synchronisation interface for a system with multiple front-ends with Type 7533 or Type Type 7533 or Type 7536 LAN Interface ModulesModules
❍ Connection of remote control for sound intensity measurements via RS�232 interface32 interface
❍ One Direct/CCLD input channel with tacho supplyo supply
IntroductionLAN Interface Module Type 7533 controls and routes all communication between the7533 controls and routes all communication between thePC and the input/output modules.put/output modules.
Multiframe Control Ime Control InterfaceThis interface transmits or receives synchronisation and clock signal to or from othergnal to or from otherfront-ends. This enables up to 10 units to be combined to act as one multichannelsystem. It also enables all front-ends in a system to be turned on or off simultaneously.ystem. It also enables all front-ends in a system to be turned on or off simultaneously.
Serial InterfaceAn RS�232 interface on the front panel allows communication with the optional Remotehe front panel allows communication with the optional RemoteControl Unit ZH 0632 for sound intensity measurements. The interface is also used for0632 for sound intensity measurements. The interface is also used forsetting up the LAN address and testing the front-end hardware.p the LAN address and testing the front-end hardware.
InputAn input channel with a direct (BNT) input connector for CCLD (including DeltaTronBNT) input connector for CCLD (including DeltaTrong DeltaTron�)transducers. The input also conditions a tacho probe and transducers, providing a DCsource.
Aux I/OO1
Type 7533 contains 16 DC input channels and 2 open drain outputs allowing simple on/ype 7533 contains 16 DC input channels and 2 open drain outputs allowing simple on/2 open drain outputs allowing simple on/off control of actuators, etc. The DC channels are all present on a single connector.DC channels are all present on a single connector.
1. Prepared for future use.
9
100 Mbit LAN Interface Module – Type 7536 bit LAN Interface Module – Type 7536 face Module – Type 7536 Type 7536 (Tentative)
USES
❍ Interfacing an IDAe-based Data Acquisition Front-uisition Front-end (Type 3560 D/E only) to a PULSE System via /E only) to a PULSE System via LAN (Local Area Network)N (Local Area Network)
FEATURES
❍ Sets up and transmits data from input modulesmits data from input modules
❍ Provides sampling clock for the input modules
❍ Provides synchronisation interface for a system with multiple front-ends with LAN Interface Modules LAN Interface Modules Type 7533 or Type 75367533 or Type 7536
❍ Connection of remote control for sound intensity measurements via RSvia RS�232 interface
IntroductionLAN Interface Module Type 7536 controls and routes all communication between thele Type 7536 controls and routes all communication between theween thePC and the input/output modules.
Multiframe Control InterfaceThis interface transmits or receives synchronisation and clock signal to or from otherves synchronisation and clock signal to or from otherfront-ends. This enables up to 10 units to be combined to act as one multichannelp to 10 units to be combined to act as one multichannelsystem. It also enables all front-ends in a system to be turned on or off simultaneously.
Serial InterfaceAn RSRS�232 interface on the front panel allows communication with the optional RemoteControl Unit ZH 0632 for sound intensity measurements. The interface is also used forUnit ZH 0632 for sound intensity measurements. The interface is also used forThe interface is also used forsetting up the LAN address and testing the front-end hardware.
Aux I/O1
Type 7536 contains 16 DC input channels and 2 open drain outputs allowing simple on/ype 7536 contains 16 DC input channels and 2 open drain outputs allowing simple on/2 open drain outputs allowing simple on/off control of actuators, etc. The DC channels are all present on a single connector.DC channels are all present on a single connector.
1. Prepared for future use.
10
6/1-ch. Input/Output Module –/1-ch. Input/Output Module –Output Module –e –�Type 3032 A, 3032 BA, 3032 B
USES
❍ 6 input channels for multichannel acoustic and vibration measurementsbration measurements
FEATURES
Two versions are available:3032 A:Each input channel has independent CCLD/direct andCCLD/direct andpreamplifier input connectors (BNC and LEMO), allow-NC and LEMO), allow-ing any combination of transducersbination of transducers3032 B:One 37-pole D-sub connector for all 6 input channels.Each channel can be set independently
Both modules feature:
❍ Floating/non-floating inputs/outputs
❍ One generator output (BNC) for simple sine tone testing
❍ Supports IEEE P1451.4 capable transducers with h TEDS (setup uses data stored in the transducer)
❍ Overload indicator indicates incorrect conditioning on connected transducersverload indicator indicates incorrect conditioning on connected transducers
❍ Overload detection including out-of-band frequencies
❍ DC, 0.7 Hz7 Hz, 7 Hz, 22.4 Hz and special intensity high-pass filters, independently set for each channel
❍ Automatic DC offset compensation on input channels
❍ Independent input ranges for each channel
❍ Powerful built-in digital signal processors for signal conditioning
❍ Intensity phase-matching on channels 5 and 65 and 6
Type 3032 A features:ype 3032 A features:
❍ Microphone polarization voltage 0, 200 V (all channels simultaneously)V (all channels simultaneously)
Functions and features available in the module are determined by software implemented and downloadedble in the module are determined by software implemented and downloadedfrom PULSE LabShop.SE LabShop.
Inputut
Each channel on Type 3032 A offers a BNC/BNTrs a BNC/BNT1 input connector for direct or CCLD(including DeltaTron� and ICP�)� transducers and a 7-pin LEMO connector for micro-pin LEMO connector for micro-phone preamplifiers. The channels are independent, which allows you to mix and matchwhich allows you to mix and matchyour input types. Charge operation can be obtained using Charge to DeltaTronbe obtained using Charge to DeltaTron� Con-verter Type 2647.2647.
Type 3032 B comes with a 37-pole D-sub connector containing all input channels. With-pole D-sub connector containing all input channels. Withappropriate cables this version allows easy and fast connection of multi-transducerd fast connection of multi-transducersystem such as microphone array systems.
1. Ch.1 and ch.2 are equipped with a BNT connector, to provide a DC supply for a Tacho Probe.
11
Note that Type 3032 B does not support microphones that require external polarization2 B does not support microphones that require external polarizationvoltage.
For each channel, a LED indicates the status of the channel: “activated” (green) or) or“overload” (red). A “measuring” LED indicates that a setup is downloaded from the PC-tes that a setup is downloaded from the PC-software into the front-end, and that a measurement is performed.
Floating/Non-floating InputsAll input and output grounds can be set by the be set by the PULSE software to be independentlylyfloating or non-floating in order to avoid ground loop interference.
Independent Channelsdependent ChannelsThe input channels on the module can be set up independently. This means that youcan set up the high-pass filters and input gain separately and attach different types oftransducers to different channels. With Type 3032 A, the microphone polarization volt-With Type 3032 A, the microphone polarization volt-volt-age can be switched on for all channels (Note: The microphone polarization voltage iszation voltage isthe same on all microphone channels).
For sound intensity measurements, channels 5 and 6 are phase-matched down to5 and 6 are phase-matched down to17 millidegrees at 50 Hz.Hz.
IEEE P1451.4 TransducerscersType 3032 supports IEEE P1451.4 capable transducers with standardised Transducerapable transducers with standardised TransducerElectronic Data Sheets (TEDS)). This feature allows automatic front-end and analyzersetup, based on information stored in the transducer. This information includes, forbased on information stored in the transducer. This information includes, forexample, sensitivity, serial number, manufacturer and calibration date.
Transducer Conditioning CheckType 3032 uses two methods to detect transducer cable breaks or whether the wrong032 uses two methods to detect transducer cable breaks or whether the wrongconditioning has been chosen. For microphones, their supply current is monitored. ForFor microphones, their supply current is monitored. ForDeltaTron� accelerometers (or microphones using DeltaTrong DeltaTron� preamplifiers), the sup-ply voltage is monitored. If conditioning errors are detected, an error event is indicatedconditioning errors are detected, an error event is indicatedas an overload on the specific channel.
Output
The output channel on Type 3032 can be used as a simple, high-quality sine tonebe used as a simple, high-quality sine tonegenerator with a frequency range from 0.1 to 25.6 kHz. The maximum output voltage is1 to 25.6 kHz. The maximum output voltage iss5 Vrmsms delivered in one output range through a 24-bit D/A converter. The signal is/A converter. The signal isprovided by a BNC connector, and may be referred to ground or floating.BNC connector, and may be referred to ground or floating.
12
Generator, 4/2-ch. Input/Output Module –or, 4/2-ch. Input/Output Module –put/Output Module –dule – Type 3109109
USES
❍ 4 input channels for multichannel acoustic and put channels for multichannel acoustic and vibration measurements
❍ 2 generator output channels for system excitation for acoustic and vibration measurements
FEATURES, INPUT
❍ 4 input channels with independent CCLD and preamplifier input connectors, allowing DC, AC, g DC, AC, CCLD or preamplifier inputs with combinations of binations of different transducers
❍ Supports IEEE P1451.4 capable transducers with with TEDS (setup uses data stored in the transducer)
❍ Overload indicator indicates incorrect conditioning on connected transducers
❍ Overload detection including out-of-band frequencies
❍ DC, 0.7 Hz, 7 Hz, 22.4 Hz and special intensity high-pass filters, independently set for each channel7 Hz, 7 Hz, 22.4 Hz and special intensity high-pass filters, independently set for each channel
❍ Automatic DC offset compensation
❍ Independent input ranges for each channel
❍ Intensity phase-matching on channels 3 and 4y phase-matching on channels 3 and 4
FEATURES, OUTPUT
❍ Output up to 25.6 kHz5.6 kHz
❍ Waveforms and generator functionality determined by PULSE softwarelity determined by PULSE software
Input
Type 3109 is an all-in-one input/output module. Four independent input channels arechannels areeach equipped with two input connectors (BNC/BNT and LEMO). This allows you toT and LEMO). This allows you tomix and match your input types. Two output channels can be used as signal generatorsx and match your input types. Two output channels can be used as signal generatorsat frequencies up to 25.6 kHz.frequencies up to 25.6 kHz.
Type 3109 offers outstanding input and output capabilities on the same module, whether109 offers outstanding input and output capabilities on the same module, whetheryou’re exciting a system or making multichannel measurements with a variety of trans-ducers simultaneously.
Each channel offers a BNC/BNTBNC/BNT1 input connector for direct or CCLD (including Delta-g Delta-Tron� and ICP�)�transducers and a 7-pin LEMO connector for microphone preamplifiers.EMO connector for microphone preamplifiers.The channels are independent, which allows you to mix and match your input types.you to mix and match your input types.Charge operation can be obtained using Charge to DeltaTronTron� Converter Type 2647.
A common LED indicates the status of the channel: “activated” (green) or “overload”D indicates the status of the channel: “activated” (green) or “overload”(red), if just one of the inputs has an overload. Type 3109 detects overloads for fre-Type 3109 detects overloads for fre-
1. Ch.1 is are equipped with a BNT connector, to provide a DC supply for a Tacho Probe.
13
quencies outside the measurement frequency range, thus ensuring that the overloadshe measurement frequency range, thus ensuring that the overloadsdo not interfere with the measurement. A “measuring” LED indicates that a setup isLED indicates that a setup isdownloaded from the PC software into the front-end, and that a measurement is per-C software into the front-end, and that a measurement is per-formed.
Besides front-end setup, all functionality and features supported by the module aredetermined by software implemented and downloaded from PULSE LabShop.PULSE LabShop.
Independent ChannelsThe input channels on the module can be set up independently. This means that youdule can be set up independently. This means that youcan set up the high-pass filters and input gain separately and attach different types oftransducers to different channels. (Note: The microphone polarization voltage is thevoltage is thesame on all microphone channels).
For sound intensity measurements, channels 3 and 4 are phase-matched down to4 are phase-matched down to17 millidegrees at 50 Hz.Hz.
IEEE P1451.4 TransducersEEE P1451.4 TransducersType 3109 supports IEEE P1451.4 capable transducers with standardised Transducercapable transducers with standardised TransducerElectronic Data Sheets (TEDS). This feature allows automatic front-end and analyzer). This feature allows automatic front-end and analyzersetup, based on information stored in the transducer. This information includes, forbased on information stored in the transducer. This information includes, forexample, sensitivity, serial number, manufacturer and calibration date.
Transducer Conditioning Checkg CheckType 3109 use two methods to detect transducer cable breaks or whether the wrong109 use two methods to detect transducer cable breaks or whether the wrongconditioning has been chosen. For microphones, the supply current to the microphonesphones, the supply current to the microphonesis monitored. For DeltaTron� accelerometers (or microphones using DeltaTron� pream-plifiers), the supply voltage is monitored. If conditioning errors are detected, an errorfiers), the supply voltage is monitored. If conditioning errors are detected, an errorevent is indicated as an overload on the front-end.
Output
The two output channels on Type 3109 can be used as signal generators with a frequencywo output channels on Type 3109 can be used as signal generators with a frequencygnal generators with a frequencyrange from 0 to 25.6 kHz and can supply all the signals necessary for performing systemkHz and can supply all the signals necessary for performing systemanalysis. The generators are controlled from PULSE software.PULSE software.
Type 3109 is designed around a powerful digital signal processor and a 24-bit D/Ais designed around a powerful digital signal processor and a 24-bit D/AAconverter, and has exceptional flexibility, stability and accuracy. Output levels are ad-justable in hardware, with maximum output ranging from 5 mV to 5 V RMS. Lower levelsware, with maximum output ranging from 5 mV to 5 V RMS. Lower levelsS. Lower levelsare possible by scaling the signal to the D/A converter. The signal is provided by a BNCA converter. The signal is provided by a BNCNCconnector and can be referred to ground or floating. It is possible to add a DC offset,but any unwanted DC offset is automatically removed.wanted DC offset is automatically removed.
WaveformsWaveform functionality is determined by the downloaded PULSE application software.by the downloaded PULSE application software.ftware.
Emergency Stopy StopThe connector at the top of the module allows connection to an emergency stop control,allowing you to stop the generators immediately.
14
Generator, 2/1-ch. Input/Output Module – Type 3110 1-ch. Input/Output Module – Type 3110 Output Module – Type 3110 e – Type 3110 (Tentative)ntative)
USES
❍ 2 input channels for multichannel acoustic and vibration measurementsvibration measurements
❍ 1 generator output channel for system excitation for acoustic and vibration measurements
FEATURES, INPUT
❍ Input up to 102.4 kHz02.4 kHz
❍ 24-bit ADC up to 25.6 kHz bandwidth; 16-bit up to 102.4 kHz bandwidthndwidth; 16-bit up to 102.4 kHz bandwidth
❍ 2 input channels with independent CCLD and preamplifier input connectors, els with independent CCLD and preamplifier input connectors, allowing DC, AC, CCLD or preamplifier inputs with combinations of different AC, CCLD or preamplifier inputs with combinations of different different transducers
❍ Supports IEEE P1451.4 capable transducers with TEDS (setup uses data with TEDS (setup uses data stored in the transducer)
❍ Overload indicator indicates incorrect conditioning on connected transducers
❍ Overload detection including out-of-band frequencies
❍ DC, 0.7 Hz, 7 Hz, 22.4 Hz, independently set for each channel7 Hz, 7 Hz, 22.4 Hz, independently set for each channel
❍ Automatic DC offset compensationutomatic DC offset compensation
❍ High dynamic input ranges, independent ranges for each channel
FEATURES, OUTPUT
❍ Output up to 102.4 kHz
❍ Waveforms and generator functionality determined by PULSE softwarend generator functionality determined by PULSE softwaresoftware
Input
Type 3110 is an all-in-one input/output module1. Each of its two input channels isch of its two input channels isequipped with a BNT input connector for direct or CCLD (including DeltaTronLD (including DeltaTron� andICP�)� transducers and a 7-pin LEMO connector for microphone preamplifiers. Thepin LEMO connector for microphone preamplifiers. Thechannels are independent, as are the two connectors on each channel. This allows youwo connectors on each channel. This allows youto mix and match your input types and to switch, for example, between preamplifierand DeltaTronDeltaTron� inputs. Charge operation can be obtained using Charge to DeltaTron�
Converter Type 2647. The BNT connectors also provide a DC supply for use with a2647. The BNT connectors also provide a DC supply for use with ade a DC supply for use with atacho probe.
The output channel can be used as a signal generator at frequencies up to 102.4 kHz.gnal generator at frequencies up to 102.4 kHz.
Type 3110 offers outstanding input and output capabilities on the same module, whetherme module, whetheryou’re exciting a system or making multichannel measurements with a variety of trans-ducers simultaneously.
An LED indicates the status of each channel: “activated” (green) or “overload” (red).) or “overload” (red).Type 3110 detects overloads for frequencies outside the measurement frequency range,ncies outside the measurement frequency range,thus ensuring that the overloads do not interfere with the measurement. A “measuring””
1. Type 3110 requires 100 Mbit LAN Interface Module Type 7536
15
LED indicates that a setup is downloaded from the PC software into the front-end, andC software into the front-end, andthat a measurement is performed.
Besides front-end setup, all functionality and features supported by the module aredetermined by software implemented and downloaded from PULSE LabShop.PULSE LabShop.
Independent ChannelsThe input channels on the module can be set up independently. This means that youdule can be set up independently. This means that youcan set up the high-pass filters and input gain separately and attach different types oftransducers to different channels. The microphone polarization voltage can be setseparately for each channel.
IEEE P1451.4 Transducers51.4 TransducersType 3110 supports IEEE P1451.4 capable transducers with standardised Transducer3110 supports IEEE P1451.4 capable transducers with standardised Transducerwith standardised TransducerElectronic Data Sheets (TEDS). This feature allows automatic front-end and analyzermatic front-end and analyzersetup, based on information stored in the transducer. This information includes, forexample, sensitivity, serial number, manufacturer and calibration date.
Transducer Conditioning CheckkType 3110 uses two methods to detect transducer cable breaks or whether the wrong3110 uses two methods to detect transducer cable breaks or whether the wrongconditioning has been chosen. For microphones, the supply current to the microphonesphones, the supply current to the microphonesis monitored. For DeltaTron� accelerometers (or microphones using DeltaTron� pream-plifiers), the supply voltage is monitored. If conditioning errors are detected, an errorfiers), the supply voltage is monitored. If conditioning errors are detected, an errorevent is indicated as an overload.
Output
The output channel on Type 3110 can be used as signal generator with a frequency3110 can be used as signal generator with a frequencyrange from 0 to 102.4 kHz and can supply all the signals necessary for performing systemm 0 to 102.4 kHz and can supply all the signals necessary for performing systemignals necessary for performing systemanalysis. The generators are controlled from PULSE software.LSE software.
Type 3110 is designed around a powerful digital signal processor and a 24-bit D/Aned around a powerful digital signal processor and a 24-bit D/AAconvertor, and has exceptional flexibility, stability and accuracy. The full dynamic outputrange is obtained from 7 mV to 7 V peak. Lower levels are possible by scaling the signalge is obtained from 7 mV to 7 V peak. Lower levels are possible by scaling the signaly scaling the signalto the D/A converter. The signal is provided by a BNC connector and can be referredby a BNC connector and can be referredto ground or floating. It is possible to add a DC offset, but any unwanted DC offset isDC offset, but any unwanted DC offset isautomatically removed.
WaveformsWaveform functionality is determined by the downloaded PULSE application software.he downloaded PULSE application software.
16
Sound Intensity Probe Kit – Type 3599ensity Probe Kit – Type 3599Kit – Type 3599599
Fig. 2 The remote control unit used in conjunction with handle UA 144440
Type 3599 is a two-microphone probe kit for meas-ype 3599 is a two-microphone probe kit for meas-uring sound intensity. The probe set includes theg sound intensity. The probe set includes the1/2� Sound Intensity Microphone Pair Type 4197Pair Type 4197enabling 1/3-octave centre frequency measure-frequency measure-ments between 20 Hz and 6.3 kHz. 3 kHz. Used with 1/2�
Microphone Pair Type 4197, the probe compliesair Type 4197, the probe complieswith IEC 1043 Class 1. These C 1043 Class 1. These 1/2� microphones fea-ture patented phase-corrector units making preci-d phase-corrector units making preci-sion low-frequency phase matching a practicalpossibility, leading to increased measurementbility, leading to increased measurementrange and accuracy.
For controlling measurement progress, RemoteControl Unit ZH 0632 is included in Sound IntensityUnit ZH 0632 is included in Sound IntensityProbe Kit Type 3599. This unit has 4 push buttonsand 4 LED indicators whose function is determinedd 4 LED indicators whose function is determinedby the application program (i.e., start/stop, autor-y the application program (i.e., start/stop, autor-ange, save, etc.), and also serves as an ergonomichandle for the probe unit.be unit.
For further information, see the Product Data for Type 3599, BP 1880.pe 3599, BP 1880.
PULSE and Intelligent Data Acquisition System Type 3561nd Intelligent Data Acquisition System Type 3561Acquisition System Type 3561ystem Type 3561561
PULSE LabShop will also run with Intelligent Data Acquisition Systems Type 3561 com-will also run with Intelligent Data Acquisition Systems Type 3561 com-Type 3561 com-prising the following modules:dules:
❍ LAN & SCSI Interface Module Type 7532Type 7532❍ Synchronization Module Type 7530ule Type 7530❍ 6-channel A&V Recording Module Type 3030Recording Module Type 3030
There are, however, the following differences compared to the hardware specifications:wever, the following differences compared to the hardware specifications:
❍ IEEE P 1451.4/TEDS is not supported451.4/TEDS is not supported❍ The bandwidth goes to 12.8 kHz, not 25.6 kHzwidth goes to 12.8 kHz, not 25.6 kHz❍ There is no offset compensation featurecompensation feature❍ The maximum number of channels � measurement bandwidth is 75 kHzkHz❍ If a Type 3109 is included in the system, it will be ignoredhe system, it will be ignored
17
Compliance with Standardsance with Standardsdards
(For environmental specifications and compliance with standards for PCs, see the specifications given by their respective manufaufacturers)
TYPES 3560 C, 3560 D AND 3560 EWITH LAN INTERFACE MODULE TYPE 7533 OR 7536, AND INPUT/OUTPUT MODULE TYPE 3032 A, 3032 B, 3109 OR 3110
EFFECT OF RADIATED/CONDUCTED RF, MAGNETIC FIELD AND GNETIC FIELD AND VIBRATIONRadiated RF: 80 �1000 MHz, 80% AM 1 kHz, 10 V/mConducted RF: 0.15 �80 MHz, 80% AM 1 kHz, 10 VMagnetic Field: 30 A/m, 50 Hz
Vibration: 5 �500 Hz, 12.7 mm, 15 m/s2
Input measured in 7.071 mV range with shorted input. All values values are RMS. Conducted RF immunity on all channels is only guaranteed using an external connection from measuring ground to chassis terminal on Types 2826 and 2827
,
CE-mark indicates compliance with: EMC Directive and Low Voltage Directive.Low Voltage Directive.C-Tick mark indicates compliance with the EMC requirements of Australia and New Zealand.
Safety EN 61010�1 and IEC 61010�1: Safety requirements for electrical equipment for measurement, control Safety requirements for electrical equipment for measurement, control and laboratory use.UL 3111�1: Standard for Safety � Electrical measuring and test equipment.
EMC Emissionmission EN 61326�1: Electrical equipment for measurement, control and laboratory use. EMC requirements. Part1: General requirements.EN 5008181�1 and IEC 6100–6–3: Generic emission standard. Part 1: Residential, commercial and light industry.EN 50081�2 and IEC 6100–6–4: Generic emission standard. Part 2: Industrial environment.CISPR 22: Radio disturbance characteristics of information technology equipment. Class B Limits.pment. Class B Limits.FCC Rules, Part 15: Complies with the limits for a Class B digital device.
EMC Immunity EN 61326�1: Electrical equipment for measurement, control and laboratory use. EMC requirements. Part1: MC requirements. Part1: General requirements.EN 50082�1 and IEC 6100–6–1: Generic immunity standard. Part 1: Residential, commercial and light industry.EN 50082�2 and IEC 6100–6–2: Generic immunity standard. Part 2: Industrial environment. ISO 7637�1, 7637�2 and 7637�3: Road Vehicles Vehicles � Electrical Disturbance by Conduction and Coupling.Note: The above is only guaranteed using accessories included in this System Data.
Temperature IEC 60068�2�1 & IEC 60068�2�2: Environmental Testing. Cold and Dry Heat.Operating Temperature: �10 to +50+50 �C (14 to 122 �F)Storage Temperature: �25 to +70 �C (�13 to 158 �F)
Humidity IEC 60068�2�3: Damp Heat: 93% RH (non-condensing at 40densing at 40�C (104�F))
Mechanical Operating (peak values)MIL�STD�810C: Vibration: 12.7 mm, 15 ms5 ms�2, 5 �500 HzNon-operating:IEC 60068�2�6: Vibration: 0.3 mm, 20 ms�2, 10�500 HzIEC 60068�2�27: Shock: 1000 ms�2
IEC 60068�2�29: Bump: 1000 bumps at: 3560 C, D: 400 ms�2; 3560 E: 250 ms�2
Enclosure IEC 60529: Protection provided by enclosures: Protection provided by enclosures: 3560 C: IP 32; 3560 D: IP 40; 3560 E: IP 20
Input/Output Radiated RF Conducted RF Magnetic Field Vibration
Direct/CCLD <10�V <130�V <4�V <80�V
Preamplifier <10�V < 25�V <8�V <80�V
Generator <60�V < 25�V <4�V < 5�V
18
Specifications –tions –�PULSE, the Multi-analyzer System Type 3560C/D/EE, the Multi-analyzer System Type 3560C/D/Eyzer System Type 3560C/D/Epe 3560C/D/ED/E
Multi-analyzer Systems Type 3560 C, 3560 D with LAN interface are modular, expandible, multi-analysis systems that include the following components:g components:• Pentium® II, III or IV PC• PULSE software• Microsoft® Windows NT® 4.0 or Windows® 2000 operating
system• Microsoft® Office 97Office 97, 2000 or XP• Front-end comprising:
Power Supply/Frame Type 2827orPower Supply Type 2826/Frame KK 0050
• LAN Interface Module Type 7533AN Interface Module Type 7533 or Type 7536• Generator, 4/2-ch. Input/Output Module Type 3109
6/1-ch. Input/Output Module Type 3032 A or BGenerator, 2/1-ch. Input/Output Module Type 3110orBlank Module UA 1365UA 1365
PC Requirementsts
MINIMUM• Pentium® II, III or IV, 300 MHz (750 MHz or better
recommended)• 128 MB RAM or better• 4 GB hard disk or ard disk or larger• CD-ROM Drive• Ethernet 10/100 Mbit card• 1024 � 768 display, 16000 colours or better• Min. 200 MB free disk spacefree disk space
Specifications – Portable PULSE Type 3560Cations – Portable PULSE Type 3560CULSE Type 3560C3560C
POWER SUPPLY/FRAMEType 2827
AVAILABLE MODULES4/2-ch. Input/Output Module Type 31096/1-ch. Input/Output Module Type 3032 A or 3032 BLAN Interface Module Type 7533533Blank Module UA 1365
POWER REQUIREMENTSFulfils the requirements of ISO 7637�1 and 7637�2Voltage: 10 � 32 V DCPower Consumption:wer Consumption:Without DC output and when fitted with:1�� 7533 LAN Interface Module1 � 3109 4/2-ch. Input/Output Module or 3032 6/1-ch. Input/Output Module
Nominal: 30 Wminal: 30 WMax.: 42 W (while charging battery)
Ext. Power Connector: LEMO coax., size 0B, ground on shield
BATTERIESOptional Accessories: 2 Accessories: 2 � DR35 NiMH or NI 1030, 10.8 V (nominal)
Working Time (Continuous): 2½ hoursCharging Time: 5 hours/battery
ACOUSTIC NOISE EMISSION (at 1 m)MISSION (at 1 m)
DC OUTPUT+ 5 V � 0.3 V; max. 1 A (fused)x. 1 A (fused)+12 V � 0.8 V; max. 1 A (fused)Connector: LEMO FGG.00.302
DIMENSIONS (without protective cover)Height: 105 mm (4.1 inches)Width:dth: 376 mm (14.8 inches)Depth: 300 mm (11.8 inches)Weight: 5 kg (11 lb.) with LAN Interface Module and Input/b.) with LAN Interface Module and Input/Output Module. When fitted with batteries, 6 kg (13 lb.)
Ordering Information 3560Cdering Information 3560Cation 3560CC
Type 3560 C560 CIncludes the following accessories:Type 2827 Power Supply/FrameZG 0429 Mains Supply/Battery ChargerAN xxxx Mains Cable for ZG 0429
(xxxx: country dependent)AO 0546 Power Supply Cable for in-car useDD 0552 Protection CoverDH 0541 Shoulder Strap
Optional Accessories
ZG 0405 Battery Charger(2 �) QB 0048 Battery, NiMH DR35R35UA 1556 Notebook Mounting KitUA 1572 19� Rack Mounting KitAQ 0642 Power Cable between UL 0196 and Type 3560 C/DL 0196 and Type 3560 C/DAQ 0643 Power Cable between UL 0190 and Type 3560 C/D
See also Fig. 2
dB SPL, A-weighted at 1 m
dB Lw,A-weighted
Fan Off: <17 <25
Normal (2222�C): 32 40
Max.: 33 41
199
Specifications – Multichannel Portable PULSE Type 3560Dns – Multichannel Portable PULSE Type 3560Del Portable PULSE Type 3560DSE Type 3560D60D
POWER SUPPLYType 2826
FRAMEKK 0050
AVAILABLE MODULES4/2-ch. Input/Output Module Type 31092/1-ch. Input/Output Module Type 3110 (requires Type 7536)6/1-ch. Input/Output Module Type 3032 A or 3032 BBLAN Interface Module Type 7533 or 7536Blank Module UA 1365
POWER REQUIREMENTSFulfils the requirements of ISO 7637�1 and 7637�2Voltage:ge: 10 0 ��32 V DCPower Consumption:Without DC output and when fitted with:1�� 7533/7536 LAN Interface Module
35 W nominal with 1 input moduleminal with 1 input module100 W nominal with 5 input modules
Ext. Power Connector: Neutrik Powercon 3-poleMax. No. of Tacho Probes: 4
ACOUSTIC NOISE EMISSION (at 1 m)
DC OUTPUT+ 5 V � 0.3 V; max. 1 A (fused)+12 V � 0.8 V; max. 1 A (fused)Connector: LEMO FGG.00.302LEMO FGG.00.302
DIMENSIONSHeight: 105 mm (4.1 inches)Width: 376 mm (14.8 inches)Depth: 300 mm (11.8 inches)Weight: 10 kg (22 lb.) with LAN Interface Module and 5 Input/odule and 5 Input/Output Modules
Ordering Information 3560Dng Information 3560D3560D
Type 3560 DIncludes the following accessories:Type 2826 Power SupplyKK 0050 EnclosureZG 0430 Mains SupplyAN xxxx Mains Cable for ZG 0430
(xxxx: country dependent)AO 0647 Power Supply Cable for in-car useDH 0541 Shoulder Strap
Optional Accessories
AQ 0642 Power Cable between UL 0196 and Type 3560 C/DAQ 0643 Power Cable between UL 0190 and Type 3560 C/DAQ 0656 Power supply cable with car service plug for Type cable with car service plug for Type
3560 D
See also Fig. 3
dB SPL, A-weighted at 1 m
dB Lw,A-weighted
Fan Off: 27 35
Normal (22�C): 30 38
Max.: 42 50
20
Specifications – Multichannel PULSE Type 3560E cifications – Multichannel PULSE Type 3560E ltichannel PULSE Type 3560E LSE Type 3560E 560E (Tentative)ative)
POWER SUPPLYSUPPLYType 2826
AVAILABLE MODULES4/2-ch. Input/Output Module Type 3109Module Type 31092/1-ch. Input/Output Module Type 3110 (requires Type 7536)6/1-ch. Input/Output Module Type 3032 A or 3032 BLAN Interface Module Type 7533 or 7536Blank Module UA 1365k Module UA 1365
POWER REQUIREMENTSFulfils the requirements of ISO 7637�1 and 7637�2Voltage: 10 � 32 V DC
Power Consumption:sumption:When fitted with:1�� 7533/7536 LAN Interface Module
35 W nominal with 1 input module140 W nominal with 8 input modules
Ext. Power Connector: Neutrik Powercon 3-poleMax. No. of Tacho Probes: 22
DIMENSIONSHeight: 134 mm (5.3 inches) (3 standard rack-mounting units)Width: 482.6 mm (19 inches)Depth: 300 mm (11.8 inches)Weight: 8.7 kg (19 lb.) with LAN Interface Module and 8 Input/put/Output Modules; 17.5 kg (38.5 lb.) with KQ 0155 and UH 1031
Ordering Information 3560E g Information 3560E 3560E (Tentative)ntative)
Type 3560 EEIncludes the following accessories:Type 2826 Power SupplyWB 1436 Mains SupplyAN xxxx Mains Cable for WB 1436
(xxxx: country dependent)try dependent)WU 0516 19� Rack Mounting KitAO 0647 Power Supply CableSupply Cable
Optional Accessories
KQ 0155 19� Rack EnclosureUH 1031 19� Fan Unit (Height: 1 standard rack-mounting
unit)See also Fig. 44
Specifications – 10Mbit LAN Interface Module Type 7533fications – 10Mbit LAN Interface Module Type 7533Mbit LAN Interface Module Type 7533nterface Module Type 7533dule Type 7533533
Input
FREQUENCY RANGE:REQUENCY RANGE:0 Hz to 12.8 kHz @ 32.768 kHz sampling rate0 Hz to 25.6 kHz @ 65.536 kHz sampling rate
INPUT CONNECTOR1 � BNT (ch.0) for Direct/CCLD or tachoLD or tacho
TRANSDUCER SUPPLY VOLTAGESSupply for Tacho Probe: 6 V typical, max. 60 mAConstant Current Supply for CCLD:tant Current Supply for CCLD: +4 mA with a 28 V source
INPUT COUPLING22.4 Hz high-pass filter: �0.1 dB @ f@ fl = 22.4 Hz, slope �18 dB/oct., �3 dB @ 12 Hz7 Hz digital high-pass filter: �0.1 dB @ fl = 7 Hz, slope �6 dB/oct., �3 dB @ 0.7 Hz (0.7 Hz analog filter also active)0.7 Hz high-pass filter: �0.1 dB @ fl = 0.7 Hz, slope �6 dB/oct., �3 dB @ 0.07 HzDC Direct (fl = 0 Hz)
INPUT VOLTAGE RANGE8 ranges from 7.071 mV to 22.36 VV to 22.36 Vpeak in 10 dB steps
INPUT IMPEDANCEDirect: 1 M || < 200 pF, typ.CCLD: > 100 k || < 200 pF, typ.
INPUT PROTECTIONDifferential Mode: 50 Vpeak, 35 Vrms or DCCommon Mode: 15 Vpeak
MAX. INDUCED COMMON MODE VOLTAGE. INDUCED COMMON MODE VOLTAGEDC � 80 MHz: 1 Vpeak
COMMON-MODE REJECTIONDC: 50 dB0 � 1 kHz: 40 dB
CROSSTALK (source/termination: 50termination: 50)Between ch. 0 and any channel in other modules0 � 2 kHz: �100 dB2 � 12.8 kHz: �85 dB12.8 kHz to 25.6 kHz: �80 dB
ATTENUATOR LINEARITY�0.1 dB @ 1 kHz@ 1 kHz
ANTIALIASING FILTER(@ 32.768 and 65.536 kHz sampling rate)Provide at least 80 dB attenuation of those frequencies that can cause aliasingPassband:ssband: DC C �25.6 kHz @ �0.1 dB, slope �18 dB/oct.
OVERLOAD DETECTIONApplied before filters
TOTAL HARMONIC DISTORTIONBetter than �80 dB 0.01%
NOISE(10 Hz � 25.6 kHz) terminated with �50
Range Equivalent Input Noise
7.071 mV22.36 mV70.71 mV
223.6 mV707.1 mV
2.236 V7.071 V
22.36 V
3�Vrms3�Vrms5�Vrms
10�Vrms31�Vrms
100�Vrms316�Vrms
1 mVrms
21
FREQUENCY RESPONSE UENCY RESPONSE (fl to fu re 1 kHz)7 mV to 7 V range: �0.1 dB22.36 V range: �0.3 dB
AMPLITUDE LINEARITY (@ 1 kHz)0 to 40 dB below full scale: w full scale: �0.1 dB40 to 60 dB below full scale: �0.4 dB60 to 80 dB below full scale: �1.0 dB
ABSOLUTE AMPLITUDE PRECISION�0.1 dB, 2.236 V input range (@ 1 kHz)
GAIN AND PHASE MATCHTo any channel in Input Conditioning Module in Type 3109 or Type 3032: Same as channel-to-channel match in Type 3109/3032, 9/3032, except for 22.36 V range
Special Functions
Analog and Digital Offset Adjustment:ffset Adjustment:Offset: �60 dB re max. inputSmart Transducer Support: �LAN communication according to IEEE P1451.4
The functionality of Type 7533 is dependent on the DSP software downloaded (part of application software)
LAN InterfaceN Interface
Connector:10base2: BNC connector complying with IEEE�802.3 10base210baseT: RJ45 connector complying with IEEE�802.3 10baseT
Protocol: TCP/IP and TCP/UDP
Multiframe Control
This must only be connected to other BNC Multiframe Control BNC Multiframe Control Sockets in Type 7533 or 7536
RS�232 Interface32 Interface
RS�232 Output: Fulfils EIA�562 (electrical) and EIA�574 (mechanical)Output Supply: 5 V, max. 50 mAV, max. 50 mA
Dimensions
Excluding connectorsHeight: 134.0 mm (5.28 inches)Width: 42.5 mm (1.67 inches)Depth: 234 mm (9.21 inches)Weight: 0.71 kg (1.56 lb.)
Ordering Information 7533Information 753333
Type 7533pe 7533 LAN Interface ModuleIncludes the following accessories:AO 1449 LAN Interface Cable crossover with RJ45 (1 m)AO 1451 RS�232 Cable for PULSE LAN Interface Module
Optional AccessoriesAccessories
AO 1450 LAN Interface Cable with RJ45 (1.5 m))UL 0167 Intel InBusiness® 8 Port 10/100 Switch for
EthernetUL 0190 4-port Switchor
UL 0190 – US 4-port Switch (110 V)AQ 0643 Power Cable between UL 0190 and Type 3560 C/DCable between UL 0190 and Type 3560 C/DMM 0012 Photoelectric ProbeMM 0024 Photoelectric Probe
WIRELESS LANLESS LANUL 0196 Access Point with 1 Wireless LAN PCMCIA CardWireless LAN PCMCIA CardUL 0197 Car Antenna, max. speed 140 km/hr (87.5 mph)UL 0198 Range Extender Antenna for indoor useExtender Antenna for indoor useUL 0199 PCMCIA Card for Notebook PCAQ 0642 Power Cable between UL 0196 and Type 3560 C/Dype 3560 C/D
See also Fig. 2 to Fig. 4
Specifications – 100Mbit LAN Interface Module Type 7536 ns – 100Mbit LAN Interface Module Type 7536 AN Interface Module Type 7536 Module Type 7536 pe 7536 (Tentative)ntative)
LAN Interface
Connector: RJ 45 (10baseT/100baseTX) connector complying with IEEE�802.3 100baseXProtocol: TCP/IP
Multiframe Control
This must only be connected to other BNC Multiframe Control Sockets in Type 7533 or 7536533 or 7536
RS�232 Interface
RS�232 Output: Fulfils EIA�562 (electrical) and EIA�574 (mechanical)Output Supply: 5 V, max. 50 mA
Dimensions
Excluding connectorsHeight: 134.0 mm (5.28 inches)Width: 42.5 mm (1.67 inches)Depth: 234 mm (9.21 inches)Weight: 0.51 kg (1.12 lb.)
22
Ordering Information 7536 g Information 7536 7536 (Tentative)ative)
Type 7533ype 7533 LAN Interface ModuleIncludes the following accessories:AO 1449 LAN Interface Cable crossover with RJ45 (1 m)m)AO 1451 RS�232 Cable for PULSE LAN Interface Module
Optional Accessoriesptional Accessories
AO 1450 LAN Interface Cable with RJ45 (1.5 m)J45 (1.5 m)UL 0167 Intel InBusiness® 8 Port 10/100 Switch for
EthernetUL 0190 4-port Switch
orUL 0190 – US 4-port Switch (110 V)AQ 0643Q 0643 Power Cable between UL 0190 and Type 2827
WIRELESS LANUL 0196 Access Point with 1 Wireless LAN PCMCIA CardWireless LAN PCMCIA CardUL 0197 Car Antenna, max. speed 140 km/hr (87.5 mph)UL 0198 Range Extender Antenna for indoor useExtender Antenna for indoor useUL 0199 PCMCIA Card for Notebook PCAQ 0642 Power Cable between UL 0196 and Type 2827ype 2827
See also Fig. 2 to Fig. 4
Specifications – 6/1-ch. Input/Output Module Type 3032A, 3032Bons – 6/1-ch. Input/Output Module Type 3032A, 3032But/Output Module Type 3032A, 3032Bdule Type 3032A, 3032B032A, 3032B
Input
FREQUENCY RANGE0 Hz to 25.6 kHz @ 65.536 kHz sampling rate for 6 input channels/no output channels0 Hz to 25.6 kHz @ 65.536 kHz sampling rate for 4 input channels/1 output channel0 Hz to 12.8 kHz @ 32.768 kHz sampling rate for 6 input channels/1 output channel
INPUT CONNECTOR3032 A: 2 � BNT (ch.1, ch.2); 4 (ch.1, ch.2); 4 � BNC (ch.3 � 6); 6 � 7-pole LEMO
(BNC and LEMO connectors sited in parallel)3032 B: 37-pole D-sub connector
TRANSDUCER SUPPLY VOLTAGES3032 A: Supply for Tacho Probe (ch.1, ch.2): ho Probe (ch.1, ch.2): 6 V, max. 60 mA0 mA
Microphone Polarization Voltage: 0 or 200 V for all sixchannels togetherMicrophone Supply Voltage: �15 V, max. 10 mA/channelConstant Current Supply for CCLD: +4 mA with a 28 Vsource
3032 B: Microphone Supply Voltage: �15 V, max. 10 mA/channelConstant Current Supply for CCLD: +4 mA with a 28 Vsource
INPUT COUPLINGT COUPLING22.4 Hz high-pass filter: �0.1 dB @ fl = 22.4 Hz, slope �18 dB/oct., �3 dB @ 12 Hz7 Hz digital high-pass filter: �0.1 dB @ fl = 7 Hz, slope �6 dB/oct., �3 dB @ 0.7 Hz (0.7 Hz analog filter also active)0.7 Hz high-pass filter: �0.1 dB @ fl = 0.7 Hz, slope �6 dB/oct., �3 dB @ 0.07 HzDC Direct (fl = 0 Hz)
INPUT VOLTAGE7 ranges from 7.071 mVpeak to 7.071 Vpeak in 10 dB steps
INPUT IMPEDANCEDANCEDirect, Microphone: 1M || <200pF200pFCCLD: >100k || <200pF
INPUT PROTECTIONDifferential Mode: 50 Vpeak, 35 Vrms or DCCommon Mode: 5 Vpeak
MAXIMUM INDUCED COMMON MODE VOLTAGE1 Vpeak DC � 4 MHz10Vrms 4MHz � 80 MHz
COMMON-MODE REJECTIONDC: 50 dB
0 to 1 kHz:1 kHz: 40 dB
CROSSTALK (source/termination: 50)Between any two channels of a module or between any twoule or between any twochannels in different modules:0 to 2 kHz: �100 dB2 kHz to 12.8 kHz: �85 dB12.8 kHz to 25.6 kHz: �80 dB
ATTENUATOR LINEARITYUATOR LINEARITY�0.1 dB @1 kHz
TOTAL HARMONIC DISTORTIONAt least �80 dB below max. input (0.01%)
NOISE (10 Hz to 25.6 kHz terminated with 50d with 50)Input Range Equivalent Input Noise7.071 mVV 3�Vrms22.36 mV 3�Vrms70.71 mV 5�Vrms223.6 mV 10�Vrms707.1 mV 31�Vrms2.236 V 100�Vrms7.071 V 316�Vrms
FREQUENCY RESPONSEfL to fU: �0.1 dB re 1 kHz
AMPLITUDE LINEARITY (@ 1 kHz)0 to 40 dB below full scale: cale: �0.1 dB40 to 60 dB below full scale: �0.4 dB60 to 80 dB below full scale: �1.0 dB
ABSOLUTE AMPLITUDE PRECISION�0.1 dB, 2.236 V input range (@ 1 kHz)
CHANNEL-TO-CHANNEL MATCH (any input range)HANNEL-TO-CHANNEL MATCH (any input range)Maximum Gain Difference: 0.2 dB from lower frequency limit, fLto upper frequency limit, fUMaximum Phase Difference (within one frame):1.2� � 0.1� � (f/fL) from fL to 10 � fL0.2� from 10 � fL to 640 Hz0.1����0.1� � (f/640) from 640 Hz to 6.4 kHz
CHANNEL-TO-CHANNEL MATCH (same input range)Maximum Gain Difference:0.2 dB from lower frequency limit, fL, to upper frequency limit, fUMaximum Phase Difference (within one frame):1.2� � 0.1� � (f/fL) from fL to 10 � fL0.2��from 10 � fL to 1280 Hz80 Hz0.1����0.1� � (f/1280) from 1280 Hz to 25.6 kHzSound Intensity Phase Match (only for ch. 5 and 6 using Intensityound Intensity Phase Match (only for ch. 5 and 6 using Intensity Filter): Complies with IEC 1043 Class 1 and ANSI S1.12�1995 Class 1, using Brüel & Kjær Sound Intensity Probesg Brüel & Kjær Sound Intensity Probes
23
ANTIALIASING FILTER(@ 32.768 and 65.536 kHz sampling rate)z sampling rate)Provides at least 80 dB attenuation of those input frequencies which can cause aliasingPassband: DC to 25.6 kHz @ �0.1 dB, slope �18 dB/oct
OVERLOAD DETECTION Detectors applied before filters. Overload/active indication per before filters. Overload/active indication per channel on front panel
Output
Frequency Range: 0.1 Hz to 25.6 kHzOutput Connector: BNC, floating or groundedMax. Output Voltage: 5 Vrms in one range (24-bit DAC)AC)Output Impedance: 50
Frequency Response re 1 kHz:Hz:0.1 Hz to 12.8 kHz: +0.1, �0.2 dB0.1 Hz to 25.6 kHz: +0.1, �0.4 dB
Distortion: �80 dB at max. outputWaveforms: Fixed sine
Special Functions
Microphone Charge Injection Calibration:Max. Test Signal: 5 VrmsFrequency Range: 0.1 Hz to 25.6 kHzquency Range: 0.1 Hz to 25.6 kHz
Transducer and Cable Fault Detection:Microphone supply current monitoringCCLD idle voltage monitoring
Analog Self-test: Functional CheckAnalog and Digital Offset Adjustment:
Offset: �60 dB re max. input.B re max. input.Smart Transducer Support: �LAN communication according to IEEE P1451.4The functionality, including waveforms, of Type 3032 is depend-ent on the DSP software downloaded (part of application soft-(part of application soft-ware)
Dimensions
Excluding connectorsHeight: 134.0 mm (5.28 in)Width: 42.5 mm (1.67 in)Depth: 234 mm (9.21 in)Weight: 0.71 kg (1.56 lb.)
Ordering Information 3032dering Information 3032ation 3032
Type 3032: 6/1-ch. Input/Output ModuleInput/Output Moduleis available in two versions:3032 A with BNC/BNT and LEMO connectors3032 B with 37-pole D-sub connector (cables must be ordered must be ordered separately)
Optional Accessories
Type 2647 Charge to CCLD AmplifierJP 0145 BNC to 10�32 UNF Plug AdaptorUNF Plug AdaptorAO 0526 4p Microtech to 3 � BNC Cable
3 � BNC to multiplug for triaxial transducersJP 1040 2 � 7-pole LEMO to 10-pole LEMO for Intensity
Probe (Type 2683)
3032 B only:AO 0535 37-pole D-sub to 6 Microdot for accelerometersaccelerometersAO 0536 37-pole D-sub with 2 plugs for triaxial
accelerometersWL 1261 37-pole D-sub with 6 � 7-pole LEMO plugs for
microphone. preamplifiersWL 1271 37-pole D-sub with 6 BNC plugsBNC plugs
A wide range of Brüel & Kjær accelerometers, microphones, preamplifiers and sound intensity probes is available for use with a Type 3560 system. These include:60 system. These include:
Type 3599 Sound Intensity Probe Kit (includes Remote Control ZH 0632)
24
Specifications – Generator, 4/2-ch. Input/Output Module Type 3109pecifications – Generator, 4/2-ch. Input/Output Module Type 3109Generator, 4/2-ch. Input/Output Module Type 31092-ch. Input/Output Module Type 3109Output Module Type 3109e Type 3109
Input
FREQUENCY RANGE:0 Hz to 12.8 kHz @ 32.768 kHz sampling ratekHz @ 32.768 kHz sampling rate0 Hz to 25.6 kHz @ 65.536 kHz sampling rateLower sampling frequencies are obtained by decimation
INPUT CONNECTOR1�BNT (ch.1); 3(ch.1); 3 �BNC (ch.2�4); 4�7-pole LEMO (BNC and LEMO connectors sited in parallel)
TRANSDUCER SUPPLY VOLTAGESSupply for Tacho Probe (ch.1): acho Probe (ch.1): 6 V, max. 60 mAMicrophone Polarization Voltage: 0 or 200 VMicrophone Supply Voltage: �15 V, max. 10 mA/channel/channelConstant Current Supply for CCLD: +4 mA with a 28 V source
INPUT COUPLING22.4 Hz high-pass filter: �0.1 dB @ fL = 22.4 Hz, slope �18 dB/oct., �3 dB @ 12 Hz7 Hz digital high-pass filter: �0.1 dB @ fL = 7 Hz, slope �6 dB/oct., �3 dB @ 0.7 Hz ((0.7 Hz analog filter also active)0.7 Hz high-pass filter: �0.1 dB @ fL = 0.7 Hz, slope �6 dB/oct., �3 dB @ 0.07 HzIntensity filter: �0.1 dB @ 120 Hz, slope �6 dB/oct., �3 dB @ 12 HzDC Direct (fL = 0 Hz)
INPUT VOLTAGEAGE7 ranges from 7.071 mVpeak to 7.071 Vpeak in 10 dB steps
INPUT IMPEDANCEDirect, Microphone: 1MM || <200pFCCLD: >100k || <200pF
INPUT PROTECTIONDifferential Mode: 50 Vpeak, 35 Vrms or DCCommon Mode: 15 Vpeak
MAXIMUM INDUCED COMMON MODE VOLTAGEDC � 80 MHz:0 MHz: 1 Vpeak
COMMON-MODE REJECTIONDC: 50 dB0 to 1 kHz: 40 dB
CROSSTALK (source/termination: 50)Between any two channels of a module or between any two channels in different modules:0 to 2 kHz: 2 kHz: �100 dB2 kHz to 12.8 kHz: �85 dB12.8 kHz to 25.6 kHz: �80 dB
ATTENUATOR LINEARITY�0.1 dB @ 1 kHz
TOTAL HARMONIC DISTORTIONAt least �80 dB below max. input (0.01%)
NOISE(10 Hz � 25.6 kHz) terminated with �50
Input Range Equivalent Input Noisequivalent Input Noise7.071 mV 3�Vrms22.36 mV 3�Vrms70.71 mV 5�Vrms223.6 mV 10�Vrms707.1 mV 31�Vrms2.236 V 100�Vrms7.071 V 316�Vrms
FREQUENCY RESPONSEfL to fU: �0.1 dB re 1 kHz
AMPLITUDE LINEARITY (@ 1 kHz)@ 1 kHz)0 to 40 dB below full scale: �0.1 dB40 to 60 dB below full scale: �0.4 dB4 dB60 to 80 dB below full scale: �1.0 dB
ABSOLUTE AMPLITUDE PRECISIONPLITUDE PRECISION�0.1 dB, 2.236 V input range (@ 1 kHz)
CHANNEL-TO-CHANNEL MATCH (any input range)Maximum Gain Difference: 0.2 dB from lower frequency limit, fL to upper frequency limit, fUMaximum Phase Differencehase Difference (within one frame):1.2� � 0.1� � f/fL from fL to 10 � fL0.2� from 10 � fL to 640 Hz0.1� + 0.1� � f/640 from 640 Hz to 6.4 kHz
CHANNEL-TO-CHANNEL MATCH (same input range)Maximum Gain Difference:0.2 dB from lower frequency limit, fL, to upper frequency limit, fUMaximum Phase Difference (within one frame):1.2� � 0.1� � f/fL from fL to 10 � fL0.2��from 10 � fL to 1280 Hz80 Hz0.1� + 0.1� � f/1280 from 1280 Hz to 25.6 kHzSound Intensity Phase Match (only for ch. 3 and 4 using Intensity Intensity Phase Match (only for ch. 3 and 4 using Intensity Filter): Complies with IEC 1043 standard Class 1 and ANSI S1.12 �
1995 Class 1, using Brüel & Kjær Sound Intensity Probesg Brüel & Kjær Sound Intensity Probes
ANTIALIASING FILTER(@ 32.768 and 65.536 kHz sampling rate)pling rate)Provides at least 80 dB attenuation of those input frequencies which can cause aliasingPassband: DC to 25.6 kHz @ �0.1 dB, slope �18 dB/oct
OVERLOAD DETECTIONApplied before filters. Common indicator on front panelbefore filters. Common indicator on front panel
Output
FREQUENCY RANGE0 Hz to 25.6 kHz @ 65.536 kHz sampling rate
OUTPUT CONNECTOR2 � BNC
OUTPUT COUPLINGDC Direct (fL= 0 Hz)
OUTPUT VOLTAGE RANGE7.07�Vpeak – 7.07 Vpeak
OUTPUT IMPEDANCE50
MAXIMUM INDUCED COMMON MODE VOLTAGE1 Vpeak DC – 4 MHz4 MHz10 Vrms 4MHz – 80 MHz
COMMON MODE REJECTION1 Hz to 1 kHz: 50 dB1 kHz to 25.6 kHz:6 kHz: 40 dB
CROSSTALKBetween any two channels of module or between any two channels in different modules0 to 2 kHz: �100 dB2 kHz to 25.6 kHz: �85 dB
HARMONIC AND SPURIOUS DISTORTION PRODUCTS (in band)< 80 dB or 1�V, whichever is greater
25
OUTPUT NOISEOutput Rangeutput Range Equivalent Output Noise7.07�V – 70.7 mV 3�Vrms70.7 mV – 707 mV 20�Vrms707 mV – 7.07 V 200�Vrms
FREQUENCY RESPONSE1 mHz to 25.6 kHzkHz: �0.1 dB re 1 kHz
FREQUENCY ACCURACY AND STABILITY0.0025% without warm-up (no adjustment necessary)
AMPLITUDE LINEARITY (@ 1 kHz)(@ 1 kHz)0 to 60 dB below full scale: �0.1 dB60 to 100 dB below full scale: �0.2 dB100 to 120 dB below full scale: �0.5 dB120 to 140 dB below full scale: �1.0 dB
ABSOLUTE AMPLITUDE PRECISIONMPLITUDE PRECISION�0.05 dB at 1 kHz, 1 Vrms, 23°C�0.1 dB at 1 kHz, 1 mV to 5 Vrms
CHANNEL-TO-CHANNEL MATCH (any output range)Maximum Gain Difference: fference: 0.2 dB from lower frequency limit, 0 Hz to upper frequency limit fu
CHANNEL-TO-CHANNEL MATCH (same output range)Maximum Gain Difference: 0.2 dB from lower frequency limit, fL, to upper frequency limit, fU
Special Functions
Microphone Charge Injection Calibration:Max. Test Signal: 5 VrmsFrequency Range: 0.1 Hz to 25.6 kHz
Transducer and Cable Fault Detection:Fault Detection:Microphone supply current monitoringCCLD idle voltage monitoringdle voltage monitoring
Analog Self-test: Functional CheckAnalog and Digital Offset Adjustment:
Offset: �60 dB re max. input.Smart Transducer Support: �LAN communication according to IEEE P1451.4
The functionality of Type 3109 is dependent on the DSP software downloaded (part of application software)
Dimensions
Excluding connectorsHeight: 134.0 mm (5.28 in)Width: 42.5 mm (1.67 in)Depth: 234 mm (9.21 in)Weight: 0.71 kg (1.56 lb.)kg (1.56 lb.)
Ordering Information 3109mation 31099
Type 3109: Generator, 4/2-ch. Input/Output Module
Optional Accessories
Type 2647 Charge to CCLD AmplifierJP 0145 BNC to 10�32 UNF Plug AdaptorAO 0526 4p Microtech to 3 crotech to 3 � BNC Cable
JP 1040 2 � 7-pole LEMO to 10-pole LEMO for Intensity Probe (Type 2683)
A wide range of Brüel & Kjær accelerometers, microphones, preamplifiers and sound intensity probes are available for use with a Type 3560 system. These include:
Type 3599 Sound Intensity Probe Kit (includes Remote Probe Kit (includes Remote Control ZH 0632)
Specifications – Generator, 2/1-ch. Input/Output Module Type 3110 ns – Generator, 2/1-ch. Input/Output Module Type 3110 /1-ch. Input/Output Module Type 3110 Output Module Type 3110 e Type 3110 (Tentative)ntative)
Input
UPPER FREQUENCYNCY25.6 kHz at 65.536 kHz sampling102.4 kHz at 262.144 kHz sampling204.8 kHz* at 524.288 kHz sampling Lower sampling frequencies are obtained by decimationwer sampling frequencies are obtained by decimation
A/D CONVERSION24-bit for upper frequency �25.6 kHz16-bit for upper frequency > 25.6 kHz
INPUT CONNECTORS: Ch.1 /Ch2: 1 � BNT + 1 � 7-pole LEMOBNT connector is internally connected if voltage input or DeltaTron� input is selected only. LEMO connector is internally MO connector is internally connected if preamp.input is selected only
INPUT COUPLING:DC Direct (fL = 0 Hz)
0.7 Hz high-pass filter: –0.1 dB @ fL = 0.7 Hz, slope – 6 dB/oct., –3 dB @ 0.07 Hz7 Hz digital high-pass filter: – 0.1 dB @ fL = 7 Hz, slope – 6 dB/oct., –3 dB @ 0.7 Hz, 0.7 Hz analog filter also active 22.4 Hz high-pass filter: – 0.1 dB@ fL = 22.4 Hz, slope – 18 dB/oct. – 3 dB @ 12 HzIntensity filter: – 0.1 dB, @120 Hz, slope – 6 dB/oct., – 3 dB @ 12 Hz“A” filter ( analog filter : –3dB @107.7 Hz –6 dB/oct; the rest of A filter is digitally obtained)Inputs can be single-ended or floating
INPUT VOLTAGE8 ranges from 7.071 mVm 7.071 mVpeak to 22.34 Vpeak in 10 dB steps
INPUT IMPEDANCEDirect, Microphone:ne: 1 M || <200 pFCCLD: >100 k || <200 pF
MAXIMUM INPUT VOLTAGE35 Vpeak
MAXIMUM INDUCED COMMON MODE VOLTAGEDC – 80 MHz: 5 Vpeak*PULSE systems provide support up to 102.4 kHz
26
COMMON-MODE REJECTIONDC: 50 dB0 to 1 kHz: 40 dB1 kHz to 204.8 kHz*: 30 dB
CROSSTALK (source/termination: 50SSTALK (source/termination: 50)Between any two input channels of a module or between any two input channels in different modules:0 to 2 kHz: –130 dB (7 mV to 7 V ranges); –90 dB (in 22 V range)); –90 dB (in 22 V range)2 kHz to 12.8 kHz: –120 dB (7 mV to 7 V ranges) ; –90 dB (in 22 V range)12.8 kHz to 25.6 kHz: –110 dB (7 mV to 7 V ranges); –90 dB (in 22 V range)25.6kHz to 102.4 kHz: –100 dB (7 mV to 7 V ranges); –90 dB (in 22 V range)102.4 kHz to 204.8 kHz*: –90 dB (7 mV to 7 V ranges); –80 dB (in 22 V range)
ATTENUATOR LINEARITYOR LINEARITY�0.05 dB @ 1 kHz
ANTIALIASING FILTER Provides at least 90 dB attenuation of those input frequencies which can cause aliasing
OVERLOAD DETECTION Applied before all filters
HARMONIC DISTORTION / SPURIOUS DISTORTIONAll harmonics at least 90 dB below max. input (~0.0032%) 0 – 25.6 kHz All harmonics at least 80 dB below max. input (~0.0032%) 25.6 kHz – 204.8 kHz*4.8 kHz*All spurious frequencies at least 90 dB below max. input or < 1�V, whichever is greater
NOISE(Measured linear 10 Hz – 25.6 kHz , Input terminated by � 50)
OVERALL FREQUENCY RESPONSEfL to 25.6 kHz: �0.1 dBfL to 102.4 kHz: �0.1 dB/–0.2 dBfL to 204.8 kHz*: �0.1 dB/–0.5 dB
AMPLITUDE LINEARITY (@ 1 kHz)0 to 40 dB below full scale: � 0.1 dB40 to 60 dB below full scale: � 0.4 dB60 to 80 dB below full scale: � 1.0 dB
ABSOLUTE AMPLITUDE PRECISION� 0.1 dB, 2.236 V input range (@ 1 kHz)@ 1 kHz)
CHANNEL-TO-CHANNEL MATCH (any input range)HANNEL-TO-CHANNEL MATCH (any input range)Maximum Gain Difference: 0.2 dB from lower frequency limit, fL to upper frequency limit, fUMaximum Phase Difference (within one frame): one frame): 1.2� – 0.1� � f / fL from fL to 10 � fL ( ~ 1.1� at fL and 0.2� at 10 ��fL)0.2� from 10 � fL to 6400 Hz0.4� � f /6.4 kHz – 0.2� from 6.4 kHz to 204.8 kHz*(~ 1.4� at 25.6 kHz, 6.2� at 102.4 kHz and 12.6� at 204.8 kHz*)
CHANNEL-TO-CHANNEL MATCH (same input range)Maximum Gain Difference: 0.2 dB from lower frequency limit, fL, to upper frequency limit, fUMaximum Phase Difference (within one frame):within one frame):1.2� – 0.1� � f / fL from fL to 10 � fL ( ~ 1.1� at fL and 0.2� at 10�fL )0.2� from 10 � fL to 6400 Hz0.2� � f /6.4 kHz from 6.4 kHz to 204.8 kHz*(~ 0.8� at 25.6 kHz, 3.2� at 102.4 kHz and 6.4� at 204.8 kHz*)Sound Intensity Phase Match (only for using intensity filter): Complies with IEC 1043 standard Class 1 and ANSI S1.12 – 1995 h IEC 1043 standard Class 1 and ANSI S1.12 – 1995 Class 1, using Brüel & Kjær Sound Intensity Probes
ANALOG SPECIAL FUNCTIONS:Supply for Tacho Probe:pply for Tacho Probe: 6 V, max. 60 mA (on inner screen of BNT V, max. 60 mA (on inner screen of BNT connector) on both channels with automatic switching to non-floating input if usedPolarization Voltage: 0 or 200 V, individually switchedCCLD on/off: Constant Current Supply for CCLD: + 4 mA with a D: + 4 mA with a 28 V sourceCharge Injection Calibration:Max. Vout: 5 VrmsFrequency Range: 0 to 102.4 kHzAnalog Self-test: Functional checkAnalog and Digital Offset Adjustment: 60 dB below Max. InputdB below Max. InputInput Common Mode Overload Detection for Vcommon mode > �3.16 VCable Fault Detection (Preamp and CCLD only)Transducer Current Fault Detection (Preamp only):):+ 15 V transducer supply current monitoring; Range: 0 to 10 mA, 5 V transducer supply current monitoring; Range: 0 to 10 mA, 8-bit resolutionTransducers: Supports IEEE P1451.4 capable transducers with standardised TEDS• based on �LANN
Output
Output Connector: 1 � BNCOutput Coupling: DC Direct (fL = 0 Hz), Offset residue: 60 dB below max. outputOutput can be single-ended or floatingD/A Conversion: 24-bit
UPPER FREQUENCY102.4 kHz (fs = 262.144 kHz )
OUTPUT VOLTAGE RANGELTAGE RANGE7�Vpeak to 7 Vpeak
OUTPUT IMPEDANCE50
MAXIMUM INDUCED COMMON MODE VOLTAGE1 Vpeak, DC – 4 MHz10 Vrms, 4MHz – 80 MHz
COMMON MODE REJECTION1 Hz to 1 kHz: 50 dB1 kHz to 25.6 kHz: 40 dB25.6 kHz to 102.4 kHz: 30 dB
CROSSTALKKTo any channel ( input or output) 0 to 102.4 kHz: Better than –120 dB or better than –90 dB re max. x. input voltage whichever is greater (worse)
Input Analog Bandwidth 25.6 kHz 102.4/204.8 kHz*
A/D Converter Resolution 24-bit 16-bit
Input Range Equivalent Input Noise
7.071 mV 2�Vrms 2�Vrms
22.36 mV 2�Vrms 2�Vrms
70.71 mV 2.5�Vrms 4�Vrms
223.6 mV 3�Vrms 10�Vrms
707.1 mV 4�Vrms 31�Vrms
2.236 V 10�Vrms 100�Vrms
7.071 V 31.6�Vrms 316�Vrms
22.36 V 100 �Vrms 1000�Vrms
27
RECONSTRUCTION FILTER ONSTRUCTION FILTER Provides at least 80 dB attenuation of mirror frequencies (for fdes at least 80 dB attenuation of mirror frequencies (for fS = 262.144 kHz)
HARMONIC AND SPURIOUS DISTORTION PRODUCTS Fout 0 – 25.6 kHz: < 80 dB re full range output or 1�V, whichever is greaterFout 25.6kHz – 102.4kHz: < 70 dB re full range output or 1�V, whichever is greater
OUTPUT NOISE Output Rangege Equiv. Output Noise Equiv. Output Noise
linear (10 Hz – 25.6 kHz) (10 Hz – 204.8 kHz*)7�Vp to 70.7 mVp 3�Vrms 15�Vrms70.7 mVp to 707 mVp10�Vrms 50�Vrms707 mVp to 7.07 Vp 20�Vrms 150�Vrms
OVERALL FREQUENCY RESPONSE� 0.1 dB re 1 kHz, over the interval 1 mHz to 25.6 kHz +0.1dB/–0.3dB over the interval 1 mHz to 102.4 kHz
FREQUENCY ACCURACY AND STABILITY0.0025% without warm-up (no adjustment necessary)y)
AMPLITUDE LINEARITY (@ 1 kHz)@ 1 kHz)0 to 60 dB below full scale: �0.1 dB60 to 100 dB below full scale: �0.2 dB100 to 120 dB below full scale: �0.5 dB120 to 140 dB below full scale: �1.0 dB
ABSOLUTE AMPLITUDE PRECISIONPLITUDE PRECISION�0.05 dB at 1 kHz, 1 Vrms, 23°C�0.1 dB at 1 kHz, 1 mVrms to 3.5 Vrms
ANALOG SPECIAL FUNCTIONS:Analog Self-test: Functional checkDC Offset Adjustment: Analogue and digital compensation
Dimensions
Excluding connectors:Height: 134.0 mm (5.28 inches)8 inches)Width: 42.5 mm (1.67 inches)Depth: 234 mm (9.21 inches)Weight: 0.71 kg (1.56 lb.)
Ordering Information – PULSE Systems 3560C, 3560D, 3560Eg Information – PULSE Systems 3560C, 3560D, 3560EPULSE Systems 3560C, 3560D, 3560Ems 3560C, 3560D, 3560ED, 3560E
SOFTWAREProtection Key
Type 7700 G Noise and Vibration Analysis, 1 – 2 channelsVibration Analysis, 1 – 2 channelsType 7700 A Noise and Vibration Analysis, 3 – 4 channelsType 7700 B Noise and Vibration Analysis, 5 – 8 channelsType 7700 E Noise and Vibration Analysis, 9 – 12 channelsType 7700 C Noise and Vibration Analysis, 13 – 16 channelsType 7700 F Noise and Vibration Analysis, 17 – 24 channelsType 7700 D Noise and Vibration Analysis, 25 – 32 channelsType 7700 H Noise and Vibration Analysis, 33 – 48 channelsType 7700 II Noise and Vibration Analysis, 49 – 64 channelsType 7700 J Noise and Vibration Analysis, 65 – 128 channels
Type 7770 G FFT Analysis, 1 – 2 channelsType 7770A FFT Analysis, 3 – 4 channelsType 7770 B FFT Analysis, 5 – 8 channelsType 7770 E FFT Analysis, 9 – 12 channelsType 7770 CC FFT Analysis, 13 – 16 channelsType 7770 F FFT Analysis, 17 – 24 channelsType 7770 D FFT Analysis, 25 – 32 channelsType 7770 H FFT Analysis, 33 – 48 channelsType 7770 I FFT Analysis, 49 – 64 channelsType 7770 J FFT Analysis, 65 – 128 channels
Type 7771 G CPB Analysis, 1 – 2 channelsType 7771A CPB Analysis, 3 – 4 channelsType 7771 B CPB Analysis, 5 – 8 channelsType 7771 E CPB Analysis, 9 – 12 channelsType 7771 C CPB Analysis, 13 – 16 channelsType 7771 F CPB Analysis, 17 – 24 channelsType 7771 D CPB Analysis, 25 – 32 channelsType 7771 H CPB Analysis, 33 – 48 channelsType 7771 I CPB Analysis, 49 – 64 channelsType 7771 J CPB Analysis, 65 – 128 channels
Type 7707 Additional Analysis EngineThe software license allows measurements on the number of ftware license allows measurements on the number of channels covered by your software license for Type 7700, 7770 or 7771
Type 7701 Data Recorder
Type 7702 G Order Analysis, 2 channelsType 7702 A Order Analysis, 3 – 4 channelsType 7702 B Order Analysis, 5 – 8 channels Type 7702 EE Order Analysis, 9 – 12 channels Type 7702 C Order Analysis, 13 – 16 channels
Type 7702 F Order Analysis, 17 – 24 channelsType 7702 D Order Analysis, 25 – 32 channelsType 7702 H Order Analysis, 33 – 48 channelsType 7702 I Order Analysis, 49 – 64 channelsType 7702 J Order Analysis, 65 – 128 channels
Type 7705 Time CaptureType 7764 Multiple-Input Multiple-Output AnalysisType 7772 SSR AnalysisType 7773 Envelope AnalysisType 7774 PULSE Interface to SONY® SIR-1000Type 7780 Spatial Transformation of Sound Fields mation of Sound Fields
Component
Type 7709 PULSE Viewer License
OPERATING SYSTEMBZ 5372�xx Microsoft® Windows® 2000 without ManualsBZ 5373�xx Microsoft® Windows® 2000 with Manualsxx specifies country: GB, DE, FR, ES, IT, SET, SE
NOTEBOOK PCs*UL 0183�xx HP® Omnibook® Standard Notebook PCUL 0205�xx HP® Omnibook® High-end Notebook PCUL 0175�A�xx Dell® Latitude® High-end Notebook PCUL 0176�A�xx Dell® Latitude® Standard Notebook PCUL 0165�xx Rocky II+ Ruggedized PCxx specifies country: GB, DE, FR, ES, IT, SEfies country: GB, DE, FR, ES, IT, SE
TOWER PCs*
UL 0211 Dell® Dual P4 Workstation 530
PC ACCESSORIESUL 0109 19� HP MonitorMonitorUL 0184 Secondary Battery for UL 0183UL 0185 Zip drive for UL 0183UL 0204 R/W CD Module for UL 0183ZG 0421 Car/Airplane Adaptor for UL 0183UL 0200 Vehicle Adaptor (12 – 32 V) for Rocky II+UL 0213 17� Flat Panel Display (secondary display for
UL 0211)UL 0208�xx Microsoft® Office XP Small Business EditionOffice XP Small Business EditionUL 0209�xx Microsoft® Office XP Standard Edition with
ManualsUL 0207�xx Microsoft® Office XP Professional Editionxx specifies country: GB, DE, FR, ES, IT, SEFR, ES, IT, SE
* PCs are constantly updated. Contact your local dealer for latest information.
28
Fig. 2 Overview of Portable PULSE Type 3560 C, 2-module configuration60 C, 2-module configuration
7748 Sound Power7700X Noise and Vibration Analysis7770X FFT Analysis7771X CPB AnalysisX= A,B,C,D,E,F,G,H,I,J (see Ordering Information) including Analysis Engine
Accessories Included:
BZ5217 PULSE CD-ROM
Portable PULSE SystemType 3560C2-module configuration
Front-end
3560C Front-end Power Supply and Frame: Type 2827
Accessories Included:ZG0429 Mains Supply/ Battery Charger
ANxxxx Mains Cable for ZG0429AO0546 Power Supply Cable for in-car useDD0552 Protection CoverDH0541 Shoulder Strap
Optional Accessories:
ZG0405 Battery ChargerQB0048 Battery NiMH DR35 (x2) UA1556 Notebook Mounting Kit7533 10Mbit LAN Interface Module
Accessories Included:AO1449 LAN Interface Cable
Crossover with RJ45AO1451 RS–232 Cable for LAN
Interface Optional Accessories:
AO1450 LAN Interface Cable with RJ45UL0167 Intel 8 port LAN SwitchUL0190 4 port switchAQ0643 Power Cable for UL 0190 – 3560C/DWireless LAN:UL 0196 Access Point AP 500UL 0197 Car AntennaUL 0198 Indoor AntennaAQ0642 Power Cable for UL0196 – 3560C/DUL 0199 PCMCIA Card for Notebook PC
3109 Generator, 4/2-ch. Input/Output Module or3032A 6/1-ch. Input/Output Module or3032B 6/1-ch. Input/Output Module or UA 1365 Blank Module
SW
PULSETurnkeySystem
A PULSE Front end is a system consisting of 2827, one InterfaceModule and 0-1 Input/Output Modules, assembled and tested as one unit. If no I/O Module, then a Blank Module is requiredFront-end
Interface
I/O
PC
Service
7700X–MS1 Software Maintenance and Upgrade Agreement, X= A,B,C,D,E,F,G 3560-C-CAI Accredited Initial Calibration 3560-C-CAF Accredited Calibration
Optional
Transducers, e.g., the IEEE 1451.4 capable Miniature DeltaTron Accelerometers, Microphones and PreamplifiersSound Intensity Probe Kit Type 3599Laser Doppler Vibrometer Type 8329
990159/7
* See www.bksv.com for updated configuration information
Options:7701 Data Recorder
7703 Vold-Kalman Order Tracking Filter 7705 Time Capture7709 PULSE Viewer License
7753 Modal Test Consultant
7698 Sound Quality7752 Noise Source Identification
7754 ME´scopeVESTM
7755A PULSE Bridge to ME´scope7755B PULSE Bridge to MATLAB®
UA1572 19" Rack Mounting Kit for Type 2827
7702 Order Analysis
Ext. Int.
Clock In
Aux.I/O
Sync. In
Clock Out
Sync. OutRx
Tx LAN
RS-232LAN Interface Module
Type 7533
!
Input 0Error
Clock
Sync.
Power on/off Control
On Off
10Mbit10MbitBrüelel B K7/6-'897/6-'89& Kjær
Bat
tery
stat
us
On
/Off
Follo
w/E
xt. p
ow
er
Bat
tery
stat
us
Ext.
Po
wer
10-3
2V!
7756 WorkFlow Manager7758 Material Testing7759 Advanced Intensity Analysis7760 Operational Modal Analysis7761 Acoustic Test Consultant7764 Multiple-Input, Multiple-Output Analysis7772 SSR Analysis7773 Envelope Analysis7774 PULSE Interface to SONY® SIR 10007780 Spatial Transformation of Sound Fields Component
Notebook PCs:UL 0165-xx Rocky II + Ruggedized PC UL 0183-xx HP Omnibook Standard Notebook PCUL 0205 HP Omnibook high-end Notebook PC UL 0175-A-xx Dell Latitude High-end Notebook PCUL 0176-A-xx Dell Latitude Standard Notebook PCXX Specifies country: GB,DE,FR,ES,IT,SETower PC:UL 0211 Dell Dual P4 Workstation 530 UL 0184 Secondary Battery for HP
Omnibook 6000ZG 0421 Car/Airplane Adaptor for UL 0183UL 0200 Vehicle Adaptor (12–32V) for Rocky II +UL0208-xx MS Office XP Small Business EditionUL0209-xx MS Office XP Standard Edition with ManualsUL0207-xx MS Office XP Professional EditionXX Specifies Country: GB,DE,FR,ES,IT,SEUL 0213 Dell 17" Flat Panel Display (secondary display for UL 0211)
7707 Analysis Engine Upgrade
PULSE
A PULSE Turnkey System consists of SW, Front-end andPC which are installed and tested ready for use
Analysis Engine:
4/2-ch.Input/Output Module
Type 3109
3 4
1 2
Input
Input
Output 2
Output 1
MeasuringStop
Overload
25kHz25kHzBrüelel B K7/6-'897/6-'89& Kjær
6/1-ch.Input/Output Module
Type 3032B
Measuring
Output
25kHzBrüel B K7/6-'89& Kjær
Input1-6
1
2
3
4
5
6
Input
Input
Input
Input
Input
Input
Active/Overload
6/1-ch.Input/Output Module
Type 3032A
Measuring
Output
25kHzBrüel B K7/6-'89& Kjær
Input
1
2
Tacho
Input
3
4
Input
5
6
Brüel B K7/6-'89& Kjær
3032B CablesAO0535 37-pole D-sub to 6 Microdot for AccelerometersAO0536 37-pole D-sub with 2 plugs for triaxial accelerometersWL1261 37-pole D-sub with 6x7-pole LEMO plugs for microphone preamplifiersWL1271 37-pole D-sub with 6 BNC plugs
29
Fig. 3 Overview of Mutichannel Portable PULSE Type 3560 D, 7-module configurationble PULSE Type 3560 D, 7-module configurationfiguration
IDAe PULSE SystemType 3560D7-module configuration
Front-end
3560D Front-end Power Supply: Type 2826 Frame: KK0050
3109 Generator, 4/2-ch. Input/Output Module or3110 2/1-ch. Input/Output Module** or3032A 6/1-ch. Input/Output Module or3032B 6/1-ch. Input/Output Module or UA 1365 Blank Module
SW
PULSETurnkeySystem
A PULSE Front end is a system consisting of a frame and powersupply, one Interface Module and 0-5 Input/Output Modules, assembled and tested as one unit. Empty slots must contain Blank Modules
Front-end
Interface
I/O
PC
Service 7700X–MS1 Software Maintenance and Upgrade Agreement, X= A,B,C,D,E,F,G
Optional
Transducers, e.g., the IEEE 1451.4 capable Miniature DeltaTron Accelerometers, Microphones and PreamplifiersSound Intensity Probe Kit Type 3599Laser Doppler Vibrometer Type 8329
010056/2
* See www.bksv.com for updated configuration information** Type 3110 requires 100Mbit LAN Interface Module Type 7536
PULSE
A PULSE Turnkey System consists of SW, Front-end andPC which are installed and tested ready for use
4/2-ch.Input/Output Module
Type 3109
3 4
1 2
Input
Input
Output 2
Output 1
MeasuringStop
Overload
25kHz25kHzBrüelel B K7/6-'897/6-'89& Kjær
6/1-ch.Input/Output Module
Type 3032B
Measuring
Output
25kHzBrüel B K7/6-'89& Kjær
Input1-6
1
2
3
4
5
6
Input
Input
Input
Input
Input
Input
Active/Overload
6/1-ch.Input/Output Module
Type 3032A
Measuring
Output
25kHzBrüel B K7/6-'89& Kjær
Input
1
2
Tacho
Input
3
4
Input
5
6
Brüel B K7/6-'89& Kjær
Accessories Included:ZG0430 Mains SupplyANxxxx Mains Cable for ZG0430 AO0647 Power Supply Cable for in-car useDH0541 Shoulder Strap
7700X Noise and Vibration Analysis7770X FFT Analysis7771X CPB AnalysisX= A,B,C,D,E,F,G,H,I,J (see Ordering Information) including Analysis Engine
Accessories Included:BZ5217 PULSE CD-ROM
7533 10Mbit LAN Interface Module7536 100Mbit LAN Interface Module
Accessories Included:AO1449 LAN Interface Cable
Crossover with RJ45AO1451 RS–232 Cable for LAN
Interface
Ext. Int.
Clock In
Aux.I/O
Sync. In
Clock Out
Sync. OutRx
Tx LAN
RS-232LAN Interface Module
Type 7533
!
Input 0Error
Clock
Sync.
Power on/off Control
On Off
10Mbit10MbitBrüelel B K7/6-'897/6-'89& Kjær
LAN Interface ModuleType 7536
100Mbit100MbitBrüelel B K7/6-'897/6-'89& Kjær
Notebook PCs:UL 0165-xx Rocky II + Ruggedized PC UL 0183-xx HP Omnibook Standard Notebook PCUL 0205 HP Omnibook high-end Notebook PC UL 0175-A-xx Dell Latitude High-end Notebook PCUL 0176-A-xx Dell Latitude Standard Notebook PCXX Specifies country: GB,DE,FR,ES,IT,SETower PC:UL 0211 Dell Dual P4 Workstation 530
7748 Sound Power
Optional Accessories:
UA1556 Notebook Mounting Kit
Optional Accessories:
AO1450 LAN Interface Cable with RJ45UL0167 Intel 8 port LAN SwitchUL0190 4 port switchAQ0643 Power Cable for UL 0190 – 3560C/DWireless LAN:UL 0196 Access Point AP 500UL 0197 Car AntennaUL 0198 Indoor AntennaAQ0642 Power Cable for UL0196 – 3560C/DUL 0199 PCMCIA Card for Notebook PC
Options:7701 Data Recorder
7703 Vold-Kalman Order Tracking Filter 7705 Time Capture7709 PULSE Viewer License
7753 Modal Test Consultant
7698 Sound Quality7752 Noise Source Identification
7754 ME´scopeVESTM
7755A PULSE Bridge to ME´scope7755B PULSE Bridge to MATLAB®
7702 Order Analysis
7756 WorkFlow Manager7758 Material Testing7759 Advanced Intensity Analysis7760 Operational Modal Analysis7761 Acoustic Test Consultant7764 Multiple-Input, Multiple-Output Analysis7772 SSR Analysis7773 Envelope Analysis7774 PULSE Interface to SONY® SIR 10007780 Spatial Transformation of Sound Fields Component
UL 0184 Secondary Battery for HP Omnibook 6000ZG 0421 Car/Airplane Adaptor for UL 0183UL 0200 Vehicle Adaptor (12–32V) for Rocky II +UL0208-xx MS Office XP Small Business EditionUL0209-xx MS Office XP Standard Edition with ManualsUL0207-xx MS Office XP Professional EditionXX Specifies Country: GB,DE,FR,ES,IT,SEUL 0213 Dell 17" Flat Panel Display (secondary display for UL 0211)
7707 Analysis Engine UpgradeAnalysis Engine:
3032B CablesAO0535 37-pole D-sub to 6 Microdot for AccelerometersAO0536 37-pole D-sub with 2 plugs for triaxial accelerometersWL1261 37-pole D-sub with 6x7-pole LEMO plugs for microphone preamplifiersWL1271 37-pole D-sub with 6 BNC plugs
2/1-ch.Input/Output Module
Type 3110
Measuring
Overload
25kHzBrüel B K7/6-'89& Kjær
Monitor
Input
1 2
Output
Power-Supply ModuleType 2826
Error
Brüel B K7/6-'89& Kjær
On/Off
Ext. Supply
Live Fuse 10 A
Ground Fuse 10 A
Ext. Supply
Follow Ext. Power
!10-32V
30
Fig. 4 Overview of Multichannel PULSE System 3560 E, 10-module configurationm 3560 E, 10-module configuration
IDAe PULSE SystemType 3560E10-module configuration
Front-end
3560E Front-endPower Supply: Type 2826
3109 Generator, 4/2-ch. Input/Output Module or3110 2/1-ch. Input/Output Module** or3032A 6/1-ch. Input/Output Module or3032B 6/1-ch. Input/Output Module or UA 1365 Blank Module
SW
PULSETurnkeySystem
A PULSE Front end is a system consisting of power supply, one Interface Module and 0-8 Input/Output Modules, assembled and tested as one unit. Empty slots must contain Blank Modules
Front-end
Interface
I/O
PC
Service 7700X–MS1 Software Maintenance and Upgrade Agreement, X= A,B,C,D,E,F,G
Optional
Transducers, e.g., the IEEE 1451.4 capable Miniature DeltaTron Accelerometers, Microphones and PreamplifiersSound Intensity Probe Kit Type 3599Laser Doppler Vibrometer Type 8329
010161* See www.bksv.com for updated configuration information** Type 3110 requires 100Mbit LAN Interface Module Type 7536
PULSE
A PULSE Turnkey System consists of SW, Front-end andPC which are installed and tested ready for use
4/2-ch.Input/Output Module
Type 3109
3 4
1 2
Input
Input
Output 2
Output 1
MeasuringStop
Overload
25kHz25kHzBrüelel B K7/6-'897/6-'89& Kjær
6/1-ch.Input/Output Module
Type 3032B
Measuring
Output
25kHzBrüel B K7/6-'89& Kjær
Input1-6
1
2
3
4
5
6
Input
Input
Input
Input
Input
Input
Active/Overload
6/1-ch.Input/Output Module
Type 3032A
Measuring
Output
25kHzBrüel B K7/6-'89& Kjær
Input
1
2
Tacho
Input
3
4
Input
5
6
Brüel B K7/6-'89& Kjær
Accessories Included:WB1436 Mains SupplyANxxxx Mains Cable for WB1436 AO0647 Power Supply Cable WU0516 19" Rack Mounting Kitfor 3560E
7700X Noise and Vibration Analysis7770X FFT Analysis7771X CPB AnalysisX= A,B,C,D,E,F,G,H,I,J (see Ordering Information) including Analysis Engine
Accessories Included:BZ5217 PULSE CD-ROM
7533 10Mbit LAN Interface Module7536 100Mbit LAN Interface Module
Accessories Included:AO1449 LAN Interface Cable
Crossover with RJ45AO1451 RS–232 Cable for LAN
Interface
Ext. Int.
Clock In
Aux.I/O
Sync. In
Clock Out
Sync. OutRx
Tx LAN
RS-232LAN Interface Module
Type 7533
!
Input 0Error
Clock
Sync.
Power on/off Control
On Off
10Mbit10MbitBrüelel B K7/6-'897/6-'89& Kjær
LAN Interface ModuleType 7536
100MbitBrüel B K7/6-'897/6-'89& Kjær
Notebook PCs:UL 0165-xx Rocky II + Ruggedized PC UL 0183-xx HP Omnibook Standard Notebook PCUL 0205 HP Omnibook high-end Notebook PC UL 0175-A-xx Dell Latitude High-end Notebook PCUL 0176-A-xx Dell Latitude Standard Notebook PCXX Specifies country: GB,DE,FR,ES,IT,SETower PC:UL 0211 Dell Dual P4 Workstation 530
7748 Sound Power
Optional Accessories:KQ0155 19" Rack EnclusoreUH1031 19" Fan Unit
Optional Accessories:
AO1450 LAN Interface Cable with RJ45UL0167 Intel 8 port LAN SwitchUL0190 4 port switchAQ0643 Power Cable for UL 0190 – 3560C/DWireless LAN:UL 0196 Access Point AP 500UL 0197 Car AntennaUL 0198 Indoor AntennaAQ0642 Power Cable for UL0196 – 3560C/DUL 0199 PCMCIA Card for Notebook PC
Options:7701 Data Recorder
7703 Vold-Kalman Order Tracking Filter 7705 Time Capture7709 PULSE Viewer License
7753 Modal Test Consultant
7698 Sound Quality7752 Noise Source Identification
7754 ME´scopeVESTM
7755A PULSE Bridge to ME´scope7755B PULSE Bridge to MATLAB®
7702 Order Analysis
7756 WorkFlow Manager7758 Material Testing7759 Advanced Intensity Analysis7760 Operational Modal Analysis7761 Acoustic Test Consultant7764 Multiple-Input, Multiple-Output Analysis7772 SSR Analysis7773 Envelope Analysis7774 PULSE Interface to SONY® SIR 10007780 Spatial Transformation of Sound Fields Component
UL 0184 Secondary Battery for HP Omnibook 6000ZG 0421 Car/Airplane Adaptor for UL 0183UL 0200 Vehicle Adaptor (12–32V) for Rocky II +UL0208-xx MS Office XP Small Business EditionUL0209-xx MS Office XP Standard Edition with ManualsUL0207-xx MS Office XP Professional EditionXX Specifies Country: GB,DE,FR,ES,IT,SEUL 0213 Dell 17" Flat Panel Display (secondary display for UL 0211)
7707 Analysis Engine UpgradeAnalysis Engine:
3032B CablesAO0535 37-pole D-sub to 6 Microdot for AccelerometersAO0536 37-pole D-sub with 2 plugs for triaxial accelerometersWL1261 37-pole D-sub with 6x7-pole LEMO plugs for microphone preamplifiersWL1271 37-pole D-sub with 6 BNC plugs
2/1-ch.Input/Output Module
Type 3110
Measuring
Overload
25kHzBrüel B K7/6-'89& Kjær
Monitor
Input
1 2
Output
Power-Supply ModuleType 2826
Error
Brüel B K7/6-'89& Kjær
On/Off
Ext. Supply
Live Fuse 10 A
Ground Fuse 10 A
Ext. Supply
Follow Ext. Power
!10-32V
Ext. Int.
Clock In
Aux.I/O
Sync. In
Clock Out
Sync. OutRx
Tx LAN
RS-232LAN Interface Module
Type 7533
!
Input 0Error
Clock
Sync.
Power on/off Control
On Off
10Mbit10MbitBrüel B K7/6-'897/6-'89& Kjær25kHzBrüel &
6/1-ch.Input/Output Module
Type 3560E
Measuring
Output
B K7/6-'89Kjær
Input
1
2
Tacho
Input
3
4
Input
5
6
Brüel &
5
6/1-ch.Input/Output Module
Type 3560E
Measuring
Output
25kHzB K7/6-'89Kjær
Input
1
2
Tacho
Input
3
4
Input
6
Brüel &
6/1-ch.Input/Output Module
Type 3560E
Measuring
Output
25kHzB K7/6-'89Kjær
Input
1
2
Tacho
Input
3
4
Input
5
6
6/1-ch.Input/Output Module
Type 3560E
Measuring
Output
25kHzBrüel B K7/6-'89& Kjær
Input
1
2
Tacho
Input
3
4
Input
5
6
6/1-ch.Input/Output Module
Type 3560E
Measuring
Output
25kHzBrüel B K7/6-'89& Kjær
Input
1
2
Tacho
Input
3
4
Input
5
6
6/1-ch.Input/Output Module
Type 3560E
Measuring
Output
25kHzBrüel B K7/6-'89& Kjær
Input
1
2
Tacho
Input
3
4
Input
5
6
6/1-ch.Input/Output Module
Type 3560E
Measuring
Output
25kHzBrüel B K7/6-'89& Kjær
Input
1
2
Tacho
Input
3
4
Input
5
6
4/2-ch.Input/Output Module
Type 3109
3 4
1 2
Input
Input
Output 2
Output 1
MeasuringStop
Overload
25kHz25kHzBrüelel B K7/6-'897/6-'89& Kjær
31
BU
0228
–15
01/1
0
HEADQUAustraliCzech RIreland (Poland (SwitzerlLocal re
PC HARDWAREUL 0167 Intel® InBusiness® 8 port 10/100 Switch for
EthernetUL 0190 4-port SwitchorUL 0190 – US 4-port Switch (110 V)AO 1450O 1450 LAN Interface Cable with RJ45AQ 0643 Power Cable between UL 0190 and Type 3560 C/Dpe 3560 C/D
WIRELESS LAN (Lucent ORiNOCO)(Lucent ORiNOCO)UL 0196 Access Point with 1 Wireless LAN PCMCIA CardUL 0197 Car Antenna, max. speed 140 km/hr (87.5 mph)40 km/hr (87.5 mph)UL 0198 Indoor AntennaUL 0199 PCMCIA Card for Notebook PCAQ 06422 Power Cable between UL 0196 and Type 3560 C/D
FRONT-ENDSType 3560 C Portable PULSE (2-module configuration)Type 3560 D Multichannel Portable PULSE (7-module
configuration)Type 3560 E Multichanel PULSE (10-module configuration)
LAN INTERFACE MODULESType 7533 LAN Interface ModuleorType 7536 LAN Interface Module (Type 3560 D, E only)D, E only)
INPUT/OUTPUT MODULESType 3109 4/2-ch. Input/Output ModuleType 3110 2/1-ch. Input/Output Module*Type 3032 A 6/1-ch. Input/Output Module
Type 3032 B 6/1-ch. Input/Output ModuleUL 1365 Blank ModuleAccessories:UA 1556 Notebook Mounting KitUA 1572 19� Rack Mounting Kit for Type 2827
A wide range of Brüel & Kjær accelerometers, microphones, jær accelerometers, microphones, preamplifiers and sound intensity probes is available for use with a Type 3560 system. The system supports IEEE P1451.4 capable transducers with standardised TEDS
SERVICES3560�SI1 Installation and Configuration (at Brüel & Kjær)Brüel & Kjær)7700 X �MS1 Noise and Vibration Analysis Software
Maintenance and Upgrade Agreementgrade Agreement7770 X �MS1 FFT Analysis Software Maintenance and Upgrade
Agreement7771 X �MS1 CPB Analysis Software Maintenance and
Upgrade AgreementX = A – J corresponding to the same numbers of channels as Types 7700, 7770 and 7771 aboveSee the Software Maintenance and Upgrade Product Data Data (BP 1800) for further details of MS1 Agreements
See also Fig. 2 to Fig. 4
TRADEMARKSMicrosoft, Windows NT and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countriesICP is a registered trademark of PCB PiezotronicsMATLAB is a registered trademark of The MathWorks, Inc.SONY is a registered trademark of Sony CorporationIntel, Intel InBusiness and Pentium are registered trademarks of Intel Corporation or its subsidiaries in the United States and/or other countriesHP and Omnibook are registered trademarks of Hewlett-Packard CompanyDell and Latitude are registered trademarks of Dell Computer Corporation
Brüel & Kjær reserves the right to change specifications and accessories without noticechange specifications and accessories without notice
*Type 3110 requires 100 Mbit LAN Interface Module Type 7536
ARTERS: DK-2850 Nærum · Denmark · Telephone: +4545800500 · Fax: +4545801405 · http://www.bksv.com · e-mail: [email protected] (02)9450-2066 · Austria 0043-1-8657400 · Brazil (011)5182-8166 · Canada (514)695-8225 · China (86) 1068029906epublic 02-67021100 · Finland (0)9-755 950 · France (01)69907100 · Germany 06103/733 5-0 · Hong Kong 25487486 · Hungary (1)215830501)803 7600 · Italy 02 57 68061 · Japan 03-3779-8671 · Republic of Korea (02)3473-0605 · Netherlands (31)318 559290 · Norway 6677115522)858 9392 · Portugal (1)4711453 · Singapore (65) 377- 4512 · Slovak Republic 421 2 5443 0701 · Spain (91)6590820 · Sweden (08)4498600 and (0)1 880 70 35 · Taiwan (02)7139303 · United Kingdom (0)1438 739 000 · USA 800 332 2040presentatives and service organisations worldwide
