TWO GREAT PRODUCTS. A TOTAL SEALING SOLUTION.

ZIPsystem.com 1.800.933.9220

FLASHING TAPE

LIQUID FLASH

ZIP SYSTEM™ FLASHING TAPE: OUTSTANDING ADHESION, RESILIENCE AND EFFICIENCY.

ZIP System™ Tape is made of an advanced acrylic adhesive, proven to deliver a superior airtight and watertight seal that withstands many years of harsh weather. The tape is quickly and easily applied by hand, or by using a ZIP System™ Tape Gun, maximizing jobsite effi ciency.

Superior adhesion at broad temperature range.

Top LayerProvides good tack, for slip resistance and safety.

1

2

3

4

Thick Inner LayerOffers dimensional stability, weather and UV protection. • Carbon black – for “sunscreen” that protects other layers • Anti-oxidants for durability

Bonding LayerSpecially formulated to bond with the adhesive.

Advanced Acrylic AdhesiveDelivers a lifetime of superior adhesion. • Resists heat and UV light • Creates permanent bond strength

Adhesive fl ows into crevices for a tighter bond.

Better wetting for greater adhesion to surfaces.

Greater temperature range than asphalt and butyl – withstands extreme heat and UV light.

HEAT

UV LIGHT

1

2

3

4

Every layer works together for total performance and protection.

Tape installation options.

ZIP System™ Tape Roller easily applies pressure and smoothes out any wrinkles.

ZIP System™ Tape Gun applies tape and necessary pressure in a single motion.

ZIP SYSTEM™ LIQUID FLASH: ULTIMATE VERSATILITY FOR SEALING EVERY ROUGH OPENING.

ZIP System™ Liquid Flash is a liquid-applied fl ashing membrane made of STPE (silyl-terminated-polyether) technology. This high performance formulation combines the durability of silicones with the toughness of urethanes.

Engineered for sealing irregular, curved or hard to fl ash areas.

1

2

34

Weather and UV ResistantWarranted for up to 180 days of extreme weather and UV exposure.

3

Optimal ViscosityFlows easily to seal irregular shapes and surfaces.1

Quick Cure TimeImmediately weather resistant and tack free in as little as 20–40 minutes depending on conditions. Target thickness achieved when substrate is no longer visible.

2

Proper Adhesion to a Wide Range of SurfacesBonds to wood, concrete, masonry, architectural metals, glass, PVC, FRP, EPDM and most other building materials.

4

Liquid fl ash installation options.

Becomes waterproof immediately afterinstallation, providing fast rough dry-in.

Bonds and cures in wet weather and on damp substrates.

Flows easily to seal diffi cult areas, such as rough openings and wall penetrations.

Forms an instant seal, under the most demanding conditions.

ZIP System™ Liquid Flash is a gun grade sealant that comes in 20 oz. sausage tubes or 29 oz. cartridges.

Liquid Flash spreads easily with a ZIP System spreader or similar tool.

To locate a dealer call 1.800.933.9220 or visit ZIPsystem.com

* Limitations and restrictions apply. Visit ZIPsystem.com for details.

ZIP System™ Tape

Nominal Width

Roll Length

TapeThickness

AdhesiveTechnology

Code Evaluation

Report

Installation Temperature

Range

Allowble UV

Exposure

Tensile Strength

Elongation

3-3/4"90' 12 mils Acrylic ESR 2227 20F-120F 180 days 938 psi

400%-800%6"

Product Data

© Huber Engineered Woods LLC. ZIP System, the accompanying ZIP System logo and design are trademarks of Huber Engineered Woods LLC. Huber is a registered trademark of J. M. Huber Corporation. Huber Engineered Woods products are covered by various patents. See zipsystem.com/patents for details. HUB 3098 12/12

The ZIP System® product line is backed with an industry-leading 30-year limited warranty.*

SEALING SOLUTIONS

Ridges

Eaves

Corners

Sills

ZIP System™ Tape and ZIP System™ Liquid Flash provide sealing solutions for a tighter envelope.

ZIP System™ Liquid Flash

Packaging OptionsTypical Coverage:

Window Sill Flashing(2x4 Framing)

CuredThickness

Compound Technology

Water and Air Penetration

Installation Temperature

Range

Allowable UV

ExposureTack Free Time Cure Time

20 oz. Sausage Pack20 If (approx. six 3'-0"

window sills)

29 If (approx. nine 3'-0" window sills)

12 milsSTPE

Polymer

ASTM E331: Pass

ASTM E2357: Pass

35F-110F 180 Days 20-40 Minutes*1/8" Thickness

= 24 Hours*

29 oz. Cartridge

* At 70F and 50% relative humidity. Low temperatures and low relative humidity slow dry time; high temperatures and high relative humidity accelerate dry time.

Dormers

Skylights

Valleys

Windows

Doors

Base of wall transitions

LIM

ITE

D

WA

RR

AN

TY

50% Total Recycled Fiber