Two Circuit / Two Neutral Pro-Series TEK Track System

Two Circuit / Two Neutral Pro-Series TEK Track System - 120VIPS4 / IPS8 / IPS12

DESCRIPTIONSuperior performance for dimmed lighting, low life-cycle cost, and high power handling capacity make the Intense Professional Series track lighting an excellent choice. The 2 circuit / 2 neutral 120V track is ideal for dimming intensive applications. The independent neutrals guarantee that the two circuits are completely isolated. Cross-circuit interference and neutral harmonics are completely eliminated, essential for trouble-free dimming. The lack of harmonics ensures superior fixture performance and longer equipment life. Independent neutrals also offer twice the power handling capacity of ordinary common neutral track.

FEATURES ■ High quality, UL listed 2-CCT/2-Neutral ■ Low profile, easy and flexible installation ■ For use with specified Intense track luminaires ■ Dimming feature available, see track luminaire for compatibility ■ UL Listed for dry locations

ELECTRICAL ■ Voltage: 120V 60Hz ■ Amperage: 20A Max. / 2400W each. ■ Dimming: Reverse phase dimming must be specified by track luminaire

CONSTRUCTION ■ Architectural grade extruded aluminum ■ Polarity ridge is located on face of track to indicate position of track adapters ■ Available in white, black or silver ■ Field cuttable to desired lengths

MOUNTING OPTIONSTrack can be surface, recessed, stem, threaded rod, cable or mounted to T-bar grid

LISTING/WARRANTY ■ UL Listed to US and Canadian Standards for dry locations. ■ One (1) Year Limited Warranty

1 1/4”

Neutral 1

Polarity Ridge

Neutral 2

CCT 1

CCT 2

1 1/4”

1) Independent Neutral Enable greater power capacity (2x20A). Dimming capability to dim on two independent circuits without harmonics or interference on the neutral conductor.

2) Oversized Conductors For higher operation safety and reduced overload potential.

3) Secure Bus Bar Insulation Firmly crimped insulation secures both conductors and insulation for the life of the product.

4) Separate Mechanical Suspension Points Provides superior weight bearing capacity; ensures electrical contact integrity and reduces likelihood of arcing.

5) Polarity Ridge Takes the guesswork out of connector and track alignment during installation.

2

1

45

3

Track Part Number (Example: IPS8W)

Track Length Finish

IPS4IPS8IPS12

(4 Feet)(8 Feet)(12 Feet)

WBSV

(White)(Black)(Silver)

JOB NAME

CATALOG NUMBER

NOTES TYPE

TRACK LIGHTING L/M-0923:20 P-1

INTENSE LIGHTING | 3340 E La Palma Ave, Anaheim, CA 92806 | tel 714 630-9877 | fax 714 630-9883For Intense Lighting’s limited product warranty, go to www.intenselighting.com. For a printed copy of the warranty, you may call 800 961-5321.© 2021 Intense Lighting, LLC. All rights reserved. Note: This document is subject to change without notice.

Professional Series TEK Track Mounting OptionsTwo Circuit / Two Neutral

RECESSED MOUNTFor safe recessed mounting applications use a recessed jacket for each track section. Must order recessed jacket, mounting brackets and track separately.

CABLE MOUNTMust order ceiling cups, suspension cable and mounting brackets separately.

THREADED ROD MOUNTMust order ceiling cups, suspension cable and mounting brackets separately.

Recessed Jacket

Dimensions

Catalog # Nominal Length Actual Length

IPS4RJIPS8RJ

IPS12RJ

4’8’12’

51.5”99.5”147.5”

Recessed Jacket

1.6”

1.3”2.2”

1.26”

1.28”

1.95”

Mounting Bracket

Pro Series Track

IPS30

IPS345

IPS120

STEM MOUNTMust order canopies, stems and stem suspension points separately.

IP-C505

IPSK12

IPS120TIPS120RT

IPS120

IPS35

T-BAR MOUNTMust order T-Bar clamps and mounting brackets separately.

IPS30

IPS31

IPS120

Recessed Jacket Length Finish

IPS4RJIPS8RJIPS12RJ

(4 Feet - requires two IPS120)(8 Feet - requires three IPS120)(12 Feet - requires four IPS120)

WB

(White)(Black)

Mounting Bracket

IPS120WIPS120B

(White)(Black)

Ceiling CupFor cable or threaded rod

IPS30WIPS30B

(White)(Black)

Ceiling CupFor cable or threaded rod

IPS30WIPS30B

(White)(Black)

Suspension Cable

IPS345IPS349

(5’ Cable)(9’ Cable)

Threaded RodDiameter: 1/4” / Length: 6’

IPS31 (6’ Threaded Rod)

Mounting Bracket

IPS120WIPS120B

(White)(Black)

Mounting Bracket

IPS120WIPS120B

(White)(Black)

Recessed Dead EndPair of (2) Dead Ends (field-paintable)

IPS213R (Raw / Unpainted)

StemsDiameter: 3/8” Finish

IPSK12IPSK18IPSK24IPSK48

(12” Stem)(18 “ Stem)(24” Stem)(48” Stem)

WB

(White)(Black)

CanopyDiameter: 5” / Height: 1 1/2”

IP-C505-BIP-C505-W

(Black)(White)

Recessed T-Bar Ceiling Clamp

IPS120RTWIPS120RTB

(White)(Black)

T-Bar Ceiling Clamp

IPS120TWIPS120TB

(White)(Black)

Mounting Bracket

IPS120WIPS120B

(White)(Black)

Stem Suspension PointIncludes bracket and cover. Stem not included.

IPS35BIPS35W

(Black)(White)

JOB NAME

CATALOG NUMBER

NOTES TYPE



Professional Series TEK Track Feeds / Connectors - 120VTwo Circuit / Two NeutralTRACK CONFIGURATIONSProfessional series track is polarized and is manufactured with an identifying polarity ridge (dashed line on diagrams). Refer to these diagrams to ensure proper connector selection.

Live End Feed Connector - 120VPower feed added to end of track run.Adds 3 1/4” to the start of a run.

“L” Connector - 120VTo connect two track sections in a 90° “L” shape. Can be used as a power feed.Adjustable polarity.

Adjustable ConnectorTo connect two track section at any angle up to 90°. Cannot be used as a power feed.

Current Limiter End Feed - 120VLimits the amount of electrical load that can be placed on the circuit. (2) Self luminous ON/OFF breaker switches.

Adds3 1/4”

Adds3 1/4”

Adds3 1/4”

Adds5”

Actual 48”, 96” or 144” length or field cut to length



2.5”Adds

2.5”2.5”


5b

5b

6

4

4

5a

5a

5a

6

4

4

5b

5b

5b

6

4

4

5a

5a

5a

6

4

4

5b

1

1 2

1

1

4

3


Linear Coupler ConnectorTo join two track sections end-to-end.Adds no length to track run.

“T” Connector - 120VTo connect three track sections in a “T” shape. Can be used as a power feed.

Straight Feed Connector - 120VTo connect two track sections end-to-end. Can be used as a power feed.

“X” Connector - 120VTo connect four track sections in a “X” shape. Can be used as a power feed.

2

5

3

6

Right PolarityLeft Polarity

Linear Coupler

IPS208WIPS208BIPS208SV


Straight Feed



“X” Connector



“L” Connector



Adjustable



“T” Connector Finish

IPS205LIPS205R

(Left Polarity)(Right Polarity)

WBSV


Current Limiter Circuit 1 Breaker Circuit 2 Breaker



-1A-2A-5A-7A-10A-12A

(120W/1A)(300W/2.5A)(600W/5A)(900W/7.5A)(1200W/10A)(1440W/12A)

-1A-2A-5A-7A-10A-12A

(120W/1A)(300W/2.5A)(600W/5A)(900W/7.5A)(1200W/10A)(1440W/12A)

Live End Feed Finish

IPS201IPS201R

(Live End Feed)(Reversed Polarity Live End Feed)

WBSV


JOB NAME

CATALOG NUMBER

NOTES TYPE



Professional Series TEK Track AccessoriesTwo Circuit / Two Neutral

Outlet Box CoverCan be used on standard junction box. Compatible with IPS201, IPS203, IPS205, IPS206, IPS207

MonopointMounts permanently to junction box.

Dead EndMounts to the end of track section.

Bending ToolTool is for bending conductors when track is cut in the field.

Bending Tool

IPS-BEND (Bending Tool)

Monopoint



Dead End



Outlet Box Cover

SMTC300-2SMTC300-3

(Black)(White)

JOB NAME

CATALOG NUMBER

NOTES TYPE



Documents

Two Circuit / Two Neutral Pro-Series TEK Track System