TwisTlocks for The TransporT indusTry A Twistlock for every … · 2019-03-14 · Rail Wagon Twistlock Type WCI 1965. Interchangeable UIC type design incorporating “twistlock”

TwisTlocks for The TransporT indusTryA Twistlock for every application ...

Retractable Twistlocks

Retractable Twistlock Type WCI 151/2.A fully retractable twistlock designed to secure ISO and special containers to rigid, skeletal and platform vehicles/chassis. The securing head retracts below deck level to allow non-containerised loads to be carried.

Retractable Twistlock Type WCI 151/3. Designed to secure ISO and special containers to rigid, skeletal and platform vehicles/chassis. Allows non-containerised loads to be carried by retracting below deck level. It has a cost effective fabricated steel body and is designed for interchangeability of spare parts.

Retractable Twistlock Type WCI 148 RNS. Designed to secure ISO and special containers to rigid, skeletal and platform vehicles/chassis. The securing head retracts below deck level to allow the carriage of non-containerised loads. On the Mk1 version the head can be raised with the container in position.

Retractable Screwdown Twistlock Type WCI 148 RS.This heavy duty twistlock is available with third lock providing the ultimate in load security. On the Mk1 version the head can be raised with the container in position.

Retractable Screwdown Twistlock Type WCI 162 RSB.A fully retractable screwdown twistlock designed specifically for demountable applications. The head can be raised with the container in position and will screwdown onto any thickness aperture plate. Available with weld on or bolt on back plate. Simple to operate.

Non-Retractable Twistlocks

Non-Retractable Twistlock Type WCI 149 2NR.A non-retractable twistlock simply fitted to vehicle/chassis. The securing head remains permanently proud of the deck for loading containers in the shortest possible time. It has a weldable cast steel body and is designed for interchangeability of spare parts.

Non-Retractable Screwdown TwistlockType WCI 149 NRS.The securing head remains permanently proud of the deck for loading containers in the shortest possible time. The screwdown facility and an optional vertical bolt ensures safety for loads during transportation.

Special Applications

Cushion-Lok Type WCI 1058.Specifically designed to meet the stringent demands made by the military for the operation of containerised and demountable units in combat areas. It has specially formed polymer pads bonded to the contact face which reduces noise and vibration.

Double Retractable TwistlockType WCI 1313.Based on WCI 151/3 fabricated twistlock design. For central location on 40’-0” trailers. Twistlock centres are pre-set to ISO dimensions, keeping assembly costs to a minimum.

Marine Twistlock Type WCI 1515.Designed for multiple stacking of containers or swap bodies.

william cook Intermodal

+44 (0)1388 528 24822BS EN ISO 9001:2008

LRQ 4006347

001

William Cook Stanhope_p22_p23.indd 1 17/02/2012 11:59

UIC Twistlock Type WCI 623.This ruggedly constructed twistlock has been designed to secure ISO and special containers to railway wagons. It can be hinged back when not in use, and can be supplied with the locating spigot in the longitudinal position for side attachment.

Rail Wagon Twistlock Type WCI 1965.Interchangeable UIC type design incorporating “twistlock” features. Can be used in multiple positions. Ideal for use on swap body carrying wagons. Accepted for use by National Rail.

Container Corner Castings.Steel corner casting to ISO dimensions and ratings.

Mini-Box Corner Fitting Type WCI 1073.Designed to suit off-shore and mini containers, this mini-type corner fitting is supplied as a one-piece casting, thereby overcoming the inconsistencies commonly associated with fabricated designs.

Weldseal Door Hinge Type WCI 500.This William Cook Intermodal patented door hinge completely seals against water ingress. When normal welding takes place the heat causes a mastic type sealant on the rear face to expand thus eliminating this known corrosion trap.

RO-RO Twistlock Type WCI 1075.This swingdown twistlock is suitable for most Roll-on Roll-off applications. Its rugged design ensures long life and serviceability.

Non-Retractable Twistlock Type WCI 1650.Specially designed non-retractable twistlock without D-dent indexing system.

Container Corner Fitting.Aluminium corner fittings to ISO dimensions and ratings.

Mini-Box Corner Casting Type WCI 4620.Designed for 10’ x 8’ offshore and mini containers. S.W.L. of 20 Tonnes per set of 4.

Twistlock Aperture Casting Type WCI 1035.This casting has been designed for fabrication into demountable body systems for twistlock securing applications.

The assurance of choice and performance.William Cook Intermodal have been supplying twistlocks to the freight haulage industry since 1972 and have established an enviable reputation for design, innovation, quality and service. The William Cook Intermodal range of twistlocks have been designed to secure ISO and special containers to rigid vehicles, trailer chassis and rail wagons in environmental conditions ranging from tropical to sub-zero. By using William Cook Intermodal twistlocks, you can be assured of that extra security your vehicles need while hauling expensive cargos. In addition to supplying its wide range of “off-the-shelf” twistlocks, William Cook Intermodal offers a specialist design service to meet customers’ specific requirements.Product Development.Due to our policy of continuous product design and development we are regularly expanding our product range.

... and other Transport products


william cook IntermodalStanhope Co Durham DL13 2YR Englandphone +44 (0)1388 528 248 fax +44 (0)1388 528 879web www.william-cook.co.uk email [email protected] 23


TwisTlock ProducTs


+44 (0)1388 528 248

Skeletal Trailer

Rail Car

Ro Ro TrailerPlatform Trailer

Chassis Truck

WCI 149 2NRNon Retractable Twistlock

WCI 148 RSRetractable ScrewdownTwistlock

WCI 1075Ro Ro Twistlock

WCI 623U.I.C. Twistlock

WCI 1965Non-RetractableRail Twistlock

WCI 148 RNSRetractableNon-ScrewdownTwistlock

WCI 149 RNSNon-RetractableScrewdown Twistlock

WCI 148 RSRetractable(Screwdown)Twistlock

WCI 151/2Retractable Twistlock

WCI 151/3FabricatedRetractable Twistlock

WCI 4405U.I.C. Spigot

Retractable Screwdown Twistlock162 RSB

24

WCI 4716U.I.C. Spigot

BS EN ISO 9001:2008LRQ 4006347

001

William Cook Stanhope_p24.indd 1 17/02/2012 12:00

RetRactable twistlock - Type WCI 148 RNS Mk1

Type WCI 148 RNS Mk1

©


+44 (0)1388 528 248

this twistlock offers the user the following important advantages:

• Simplyfittedtothevehicle/chassis,usuallybywelding.

• Weldablecaststeelbodyandforgedsteelstemtoensureruggedstrength anddurability.

• Securingheadretractsbelowdeckleveltoallowthecarriageofnon containerisedloads.

• Headcanbeengagedwithcontainerinposition,anadvantagetoswop-body builders.

NB:notrecommendedfortippingapplications.SeeWCI149NRS3HTS.

Operational Procedure to LockTwistlockinretractedpositionwithhandleturnedtoleft.1. Turnhandlebackthrough90ountilindexisengaged andhandleisfacingoutward.2. Loadcontainerontovehicle.3. Fullyraiseheadandturnhandle90ototheleftuntilindex isengaged.

To Unlock1. Fullyraisehead,turnhandle180ototherightuntilindex isengaged.2. Turnhandlebackthrough90ountilindexisengagedand handleisfacingoutward.3. Headwillnowretract.4. Removecontainerfromvehicle.5. Turnhandle90otoleft.

The William Cook Intermodal range of Twistlocks has been designed to secure ISO and special containers to rigid vehicles, trailer chassis and rail wagons in environmental conditions ranging from tropical to sub-zero.

25BS EN ISO 9001:2008LRQ 4006347

001


technical infoRmation

Roundhandleasshownissuppliedasstandard,handleoptionsareavailabletosuitcustomerrequirements.

Weight 8.9kg (19.6lbs)

FINISH:Selfcolour.

©


william cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248fax+44(0)1388528879webwww.william-cook.co.ukemailintermodal@william-cook.co.uk

Description

Body

Stem

Shearblock

SupportPlate

Collar

Handle

Sleeve

Spring

SteelBall

GroovedPin

SpringPin

Item

1

2

3

4

5

6

7

8

9

10

11

Qty

1

1

1

1

1

1

1

2

4

1

1

RoundHandle

WCI1014

WCI1098

WCI1015

WCI1011

WCI987

WCI988

WCI989

WCI990/1

WCI1236

WCI999

WCI1245

FlatHandle

WCI1014

WCI1099

WCI1015

WCI1011

-

WCI1026

WCI1031

WCI990/1

WCI1236

WCI999

WCI1245

TwistlockAssembly

©

26


RetRactable twistlock - Type WCI 148 RNS Mk2


• Simplyfittedtothevehicle/chassis,usuallybywelding.


• Securingheadretractsbelowdeckleveltoallowthecarriageofnon- containerisedloads.


Operational Procedure to LockTwistlockinretractedpositionwithhandleturnedtoleftorright.1. Fullyraiseheadandturnhandlethrough90ountilindexisengagedand handleisfacingoutward.2. Loadcontainerontovehicle.3. Turnhandle90oineitherdirectionuntilindexisengaged.

To Unlock1. Raiseheadandturnhandle90ountilindexis engagedandhandleisfacingoutward.2. Removecontainerfromvehicle.3. Turnhandle90oineitherdirectionandhead willretract.


Type WCI 148 RNS Mk2

©


+44 (0)1388 528 24827BS EN ISO 9001:2008

LRQ 4006347

001




FINISH:Selfcolour.

FlatHandleOption.

©

©

Description

Body

Stem

Shearblock

SupportPlate

Collar

Handle

Sleeve

Spring

SteelBall

Item

1

2

3

4

5

6

7

8

9

Qty

1

1

1

1

1

1

1

1

2

RoundHandle

WCI1021

WCI1094

WCI1015

WCI1011

WCI987

WCI988

WCI989

WCI990/1

WCI1236

FlatHandle

WCI1021

WCI1096

WCI1015

WCI1011

-

WCI1026

WCI1031

WCI990/1

WCI1236

TwistlockAssembly


william cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248fax+44(0)1388528879webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 28


RetRactable twistlock -Type WCI 148 RS and WCI 148 RS3 Mk1 (Third Lock)

Type WCI 148 RS

©


+44 (0)1388 528 248

Operational Procedure to LockTwistlock in retracted position with handle turned to left.1. Fully unscrew handnut.2. Turn handle through 90o until index is engaged and handle is facing outward.3. Load container onto vehicle.4. Fully raise head and turn handle 90o to the left until index is engaged5. Tighten handnut.6. Lower pin between handnut spokes (WCI 148/RS3 only).

To Unlock1. Lift pin clear of handnut spokes (WCI 148 RS3 only).2. Fully unscrew handnut.3. Raise head, turn handle 180o to the right until index is engaged.4. Turn handle back through 90o until index is engaged and handle is facing outwards.5. Head will now retract.6. Remove container from vehicle.7. Turn handle 90o to left.8. Tighten up handnut.


• Simply fitted to the vehicle/chassis, usually by welding.• Weldable cast steel body and forged steel stem to ensure rugged strength and durability.• Securing head retracts below deck level to allow the carriage of non-containerised loads.• Head can be engaged with container in position, an advantage to swop-body builders.• Third lock prevents accidental unscrewing of handnut, an additional safety feature. (WCI 148 RS3 only).

NB: not recommended for tipping applications. See WCI 149 NRS 3HTS.


29BS EN ISO 9001:2008LRQ 4006347

001



Round handle as shown is supplied as standard, handle options are available to suit customer requirements.Weight WCI 148 RS 10kg (22lbs) WCI 148 RS3 10.2kg (22.4lbs)

FINISH: Self colour.

©

©


Description

Body

Stem

Shearblock

Support Plate

Handnut

Handle

Sleeve

Spring

Steel Ball

Grooved Pin

Spring Pin

3rd Lock Assembly

Item

1

2

3

4

5

6

7

8

9

10

11

12*

Qty

1

1

1

1

1

1

1

2

4

1

1

1

Round Handle

WCI 1014

WCI 1016

WCI 1015

WCI 1011

WCI 20160

WCI 988

WCI 989

WCI 990/1

WCI 1236

WCI 999

WCI 1245

WCI 1286

Flat Handle

WCI 1014

WCI 1065

WCI 1015

WCI 1011

WCI 20160

WCI 1027

WCI 1031

WCI 990/1

WCI 1236

WCI 999

WCI 1245

WCI 1286

Twistlock Assembly

*3rd lock assembly fitted to 148 RS3 Twistlock model only.

william cook IntermodalStanhope Co Durham DL13 2YR EnglandPhone +44 (0)1388 528 248 fax +44 (0)1388 528 879web www.william-cook.co.uk email [email protected] 30


William Cook Intermodal

RetRaCtable tWistloCk -Type WCI 148 RS Mk2 and WCI 148 RS3 Mk2 (Third Lock)



• Simplyfittedtovehicle/chassis,usuallybywelding.

• Weldablecaststeelbodyandforgedsteelstemto ensureruggedstrengthanddurability.

• Screwdownfeatureprovidesextrasecurity.

• Optionalverticalboltpreventsaccidental unscrewingofthehandnut,anadditionalsafety feature.(WCI148RS3only).


Operational Procedure to LockTwistlockinretractedpositionwithhandleeithertoleftorright.1. Fullyunscrewhandnut.2. Fullyraiseheadandturnhandlethrough90ountil indexisengagedandhandleisfacingoutward.3. Loadcontainerontovehicle.4. Turnhandle90oeitherleftorrightuntilindexis engaged.5. Fullytightenhandnut.6. Lowerpinbetweenhandnutspokes(WCI148RS3 only).

To Unlock1. Liftpinclearofhandnutspokes(WCI148RS3 only).2. Fullyunscrewhandnut.3. Raiseheadandturnhandle90ountilindexis engagedandhandleisfacingoutward.4. Removecontainerfromvehicle.5. Turnhandle90otoleftorrightandheadwillretract.6. Tightenuphandnut.7. Lowerpinbetweenspokes(WCI148RS3only).

Type WCI 148 RS Mk2

©

+44 (0)1388 528 24831BS EN ISO 9001:2008

LRQ 4006347

001


teChniCal infoRmation

Roundhandleasshownissuppliedasstandard,handleoptionsareavailabletosuitcustomerrequirements.Weight WCI 148 RS 9.7kg (21.3lbs) WCI 148 RS3 9.8kg (21.6lbs)

FINISH:Selfcolour.

©©


Description

Body

Stem

Shearblock

SupportPlate

Handnut

Handle

Sleeve

Spring

SteelBall

3rdLockAssembly

Item

1

2

3

4

5

6

7

8

9

10*

Qty

1

1

1

1

1

1

1

1

2

1

RoundHandle

WCI1021

WCI1095

WCI1015

WCI1011

WCI20160

WCI988

WCI989

WCI990/1

WCI1236

WCI1287

FlatHandle

WCI1021

WCI1099

WCI1015

WCI1011

WCI20160

WCI1027

WCI1031

WCI990/1

WCI1236

WCI1287

TwistlockAssembly

*3rdlockassemblyfittedto148RS3Mk2Twistlockmodelonly.

William Cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248fax+44(0)1388528879Webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 32


NoN-RetRactable twistlock - Type WCI 149 2NR

Type WCI 149 2NR

©


+44 (0)1388 528 248




• Securingheadremainspermanentlyproudofthedeckforloadingcontainers intheshortestpossibletime.


Operational Procedure to LockTwistlockinloadpositionwithoutcontainer,handlefacingoutward.1. Loadcontainerontovehicle.2. Turnhandle90oineitherdirectionuntilindexisengaged.

To Unlock1. Turnhandle90ountilindexisengagedandhandleisfacingoutward.2. Removecontainerfromvehicle.3. Turnhandle90otoleftorright.


33BS EN ISO 9001:2008LRQ 4006347

001


techNical iNfoRmatioN



FINISH:Selfcolour.

©

©


Description

Body

Stem

Collar

Handle

Sleeve

SteelBall

Spring

GrubScrew

Item

1

2

3

4

5

6

7

8

Qty

1

1

1

1

1

1

1

1

RoundHandle

WCI1066

WCI1067

WCI987

WCI988

WCI989

WCI1236

WCI990/2

WCI1237

FlatHandle

WCI1066

WCI1068

-WCI1026

WCI1031

WCI1236

WCI990/2

WCI1237

TwistlockAssembly



NoN-RetRactable ScRewdowN twiStlock -Type WCI 149 NRS and NRS3 (Third Lock)

Type WCI 149 NRS3

©


+44 (0)1388 528 248

Operational Procedure to LockTwistlock in load position without container, handle facing outwards.1. Fully unscrew handnut.2. Load container onto vehicle.3. Turn handle 90o until index is engaged.4. Fully tighten handnut.5. Lower pin between handnut spokes (WCI 149 NRS3 only).

To Unlock1. Lift pin clear of handnut spokes (WCI 149 NRS3 only).2. Unscrew handnut.3. Raise head and turn handle 90o until index is engaged and handle is facing outward.4. Remove container from vehicle.5. Turn handle 90o to left or right.6. Tighten up handnut.


• Simply fitted to vehicle/chassis, usually by welding.

• Weldable cast steel body and forged steel stem to ensure rugged strength and durability.

• Securing head remains permanently proud of the deck for loading containers in the shortest possible time.

• Screwdown feature provides extra security.

• Optional third lock prevents accidental unscrewing of the handnut, an additional safety feature. (WCI 149 NRS3 only).

NB: The Twistlock is suitable for tipping applications but must be fitted with High Tensile Stem, Twistlock type 149 NS3 HTS.


35BS EN ISO 9001:2008LRQ 4006347

001


Round handle as shown is supplied as standard, handle options are available to suit customer requirements.

Weight NRS 7.9kg (17.4lbs) NRS3 8.1kg (17.8lbs)

FINISH: Self colour.

©

©

techNical iNfoRmatioN


Description

Body

Stem

Handnut

Handle

Sleeve

Steel Ball

Spring

Grub Screw

3rd Lock Assembly

Item

1

2

3

4

5

6

7

8

9*

Qty

1

1

1

1

1

1

1

1

1

Round Handle

WCI 1023

WCI 1024

WCI 20160

WCI 988

WCI 989

WCI 1236

WCI 990/2

WCI 1237

WCI 1285

Flat Handle

WCI 1023

WCI 1025

WCI 20160

WCI 1027

WCI 1031

WCI 1236

WCI 990/2

WCI 1237

WCI 1285

Twistlock Assembly

*3rd lock assembly fitted to 149 NRS3 Twistlock model only.

william cook IntermodalStanhope Co Durham DL13 2YR EnglandPhone +44 (0)1388 528 248 fax +44 (0)1388 528 879web www.william-cook.co.uk email [email protected] 36


RetRactable twistlock - Type WCI 151/2

Type WCI 151/2

©


+44 (0)1388 528 248




• Securingheadretractsbelowdeckleveltoallownon-containerised loadstobecarried.


Operational Procedure to LockTwistlockinretractedpositionwithhandleturnedtoleftorright.1. Fullyraiseheadandturnhandle90osohandle facesoutward.2. Loadcontainerontovehicle.3. Tolockturnhandle90otoleftorrightuntilindex isengaged.

To Unlock1. Turnhandle90ountilindexisengagedandhandleis facingoutward.2. Removecontainerfromvehicle.3. Raiseheadandturn90otoleftorrighttoretract.

The William Cook Intermodal range of Twistlocks has been designed to secure ISO and special containers to rigid, skeletal and platform vehicles/chassis, in environmental conditions ranging from tropical to sub-zero.

37BS EN ISO 9001:2008LRQ 4006347

001





FINISH:Selfcolour.

©

©


Description

Body

Stem

Shearblock

Handle

Sleeve

Pin

SteelBall

Spring

Pin

Item

1

2

3

4

5

6

7

8

9

Qty

1

1

1

1

1

1

2

1

1

RoundHandle

WCI1074

WCI1090

WCI1000

WCI988

WCI989

WCI999

WCI1236

WCI990/1-

FlatHandle

WCI1074

WCI1089

WCI1000

WCI1026

WCI1031

WCI999

WCI1236

WCI990/1-

RaveHandle

WCI1074

WCI1090

WCI1000

WCI1055

WCI1031

WCI999

WCI1236

WCI990/1

WCI1246

TwistlockAssembly



RetRactable twistlock - Type WCI 151/3

Type WCI 151/3


+44 (0)1388 528 248



• Fabricatedsteelbodyandforgedsteelstemtoensureruggedstrength anddurability.

• Securingheadretractsbelowdeckleveltoallownon-containerisedloads tobecarried.


Operational Procedure to LockTwistlockinretractedpositionwithhandleturnedtoleftorright.1. Fullyraiseheadandturnhandle90osohandlefacesoutward.2. Loadcontainerontovehicle.3. Tolockturnhandle90otoleftorrightuntilindex isengaged.

To Unlock1. Turnhandle90ountilindexisengaged andhandleisfacingoutward.2. Removecontainerfromvehicle.3. Raiseheadandturn90otoleftorright toretract.

The William Cook Intermodal range of Twistlocks has been designed to secure ISO and special containers to rigid, skeletal and platform vehicles/chassis, in environmental conditions ranging from tropical to sub-zero.

39BS EN ISO 9001:2008LRQ 4006347

001

©



Description

Body

Stem

Shearblock

Handle

Sleeve

Pin

SteelBall

Spring

Pin

Item

1

2

3

4

5

6

7

8

9

Qty

1

1

1

1

1

1

2

1

1

RoundHandle

WCI1642

WCI1090

WCI1000

WCI988

WCI989

WCI999

WCI1236

WCI990/1-

FlatHandle

WCI1642

WCI1089

WCI1000

WCI1026

WCI1031

WCI999

WCI1236

WCI990/1-

RaveHandle

WCI1642

WCI993

WCI1000

WCI1055

WCI1031

WCI999

WCI1236

WCI990/1

WCI1246

TwistlockAssembly

Ravehandleasshown.Handleoptionsareavailabletosuitcustomerrequirements.


FINISH:Selfcolour.

©

©




RetRactable ScRewdown twiStlock -Type WCI 162 RSB and WCI 162 RSW


+44 (0)1388 528 248


• Fullyretractabletoallowthecarriageofnon-containerisedloads.

• Screwdownfacility,eliminatesmovementbetweencontainerandchassis.

• Variableheightshearblockwillacceptanythicknessapertureplate.

• Headcanbeengagedwithcontaineralreadyinposition,anadvantageto swapbodybuilders.

• Simpletooperate.

• Boltonorweldonbackplates.

• Safetythirdlockpreventsaccidentalunscrewingofhandnut.

• Ideallysuitedtodemountableapplications.

NB:fortippingapplicationsusetheWCI149NRS3HTS.

The William Cook Intermodal range of Twistlocks has been designed to secure ISO and swap body containers to rigid vehicles, demountable systems and trailer chassis.

41BS EN ISO 9001:2008LRQ 4006347

001

©



Description

Body

Shearblock

Stem

SupportCollar

Handnut

3rdLockAssembly

Spring

Ball

GroovePin

Handle

Sleeve

Item

1

2

3

4

5

6

7

8

9

10

11

Qty

1

1

1

1

1

1

1

2

1

1

1

PartNo

WCI4599

WCI4567

WCI4600

WCI4635

WCI20161

WCI4608

WCI990/01

MF4510000

WCI999

WCI988

WCI989

WCI162

©

Weight 8.6kg (19lbs)

FINISH:Selfcolour.

william cook Intermodalwilliam cook Intermodal


©

©

©



U.I.C. SPIGOT CASTING - Type WCI 623

This product is made from special William Cook Intermodal steel designed for low temperature working at -40°C as standard.

• DesignedtosecureISOandspecialcontainerstorailwaywagons.

• U.I.C.Standard.

This casting offers the user the following important advantages:

• Weldablecaststeelconstructiontoensureruggedstrength anddurability.

• Hingesbackwhennotinuse.

©

© ©

Type WCI 623 SM

View of underside

WCI 623 EM Wagon end location type shown

U.I.C. Standard


FINISH:Selfcolour.

+44 (0)1388 528 24843BS EN ISO 9001:2008

LRQ 4006347

001


• DesignedtosecureISOandspecialcontainersandSwapBodies torailwagons.

• AcceptedbyNationalRail.

This Twistlock offers the user the following important advantages:

• Weldablecaststeelbodyensuresruggedstrengthanddurability.

• InterchangableU.I.C.typedesignincorporating‘twistlock’features.

• Hingesbackwhennotinuse.

NB:operatinghandleoptionalextra.


©©

©

Twistlock shown in locked position

Twistlock shown in unlocked position


FINISH:Selfcolour.

RAIL WAGON TWISTLOCK - Type WCI 1965

This product is made from special William Cook Intermodal steel designed for low temperature working at -40°C as standard.

©

Type WCI 1965

William Cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248Fax+44(0)1388528879Webwww.william-cook.co.ukEmailintermodal@william-cook.co.uk 44


Ro-Ro TwisTlock - Type WCI 1075

Type WCI 1075

©


+44 (0)1388 528 248


• Swingdowntypesuitableformostroll-onroll-offapplications.

• Ruggeddesignensureslong-lifeandserviceability.

Operational Procedure to Lock1. Raisetwistlockbodyintoloadposition.2. Loadcontainer.3. Turnhandletolock.

To Unlock1. Turnhandletorelease.2. Unloadcontainer.


45BS EN ISO 9001:2008LRQ 4006347

001


©

©

Weight 5kg (11lbs)

FINISH:Selfcolour.


Technical infoRmaTion

Description

Body

Stem

Collar

Spring

SteelBall

Handle

Sleeve

Item

1

2

3

4

5

6

7

Qty

1

1

1

1

2

1

1

PartNo

WCI1637

WCI1639

WCI1638

WCI900/1

WCI1236

WCI1641

WCI989



Marine TwisTlock - Type WCI 1515

©


+44 (0)1388 528 248

• Designedasacontainer-to-deckandcontainer-to-containerlockingdevice.

• Secureswithsafety,deck-bornecontainersstackedthree-highupto stackloadof45tons.

• Castbodyandforgedsteelheadsgivesruggedstrengthanddurability.

• Handlepositionactsasvisualindicatorastolocked/unlockedposition.

47BS EN ISO 9001:2008LRQ 4006347

001


Technical inforMaTion - Type WCI 1515 Marine Twistlock

Operational Procedure1. Engagetheloweroffsetheadintothetopcontainers cornerfitting.

2. Alignupperheadtoacceptthenextcontainer.

3. Operateleverthrough90°thusindexingthetwistlockheads withintheirrespectivecornercastings.




©

©


Interconnector - Type WCI 1212

William cook Intermodal

+44 (0)1388 528 248

this Interconnector offers the user the following important advantages:

• Easeofoperation.

• Provenin-serviceuse.

• Robustdesign.

• ApprovedbyUSNavalCivilEngineeringLaboratory.

NB:TheWCI1212canbeusedintheendwallapertureoflowercornerfittingsorthesidewallaperturesofupperandlowercornerfittings.

Operational Procedure1. Indexhandletooneofthetwoloadpositions.2. InsertInterconnectorheadintoapertureofcornerfitting.3. Indexhandletosecondloadposition.4. Positionsecondcontainersothattheconnector protrudesthroughthecornerfittingaperture.5. Indexhandletothelockposition.

Designed and developed to connect military quadcons and tricons into a single 20’ unit. Also used for connecting 2 x 10’ tank containers into single 20’ unit.

49BS EN ISO 9001:2008LRQ 4006347

001

©


technIcal InformatIon

Weight 6kg (13.2lbs)

FINISH:Selfcolour.

William cook Intermodal

©

©

©

William cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248fax+44(0)1388528879Webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 50



Cushion-Lok TWisTLoCk - Type WCI 1058


• Reduceshock,vibrationandnoise,idealfortransportingsensitiveloads.



• Securingheadremainspermanentlyproudofthedeckforloading containersintheshortestpossibletime.

• Screwdownfeatureprovidesextrasecurity.

• Thirdlockpreventsaccidentalunscrewingofthehandnut,an additionalsafetyfeature.

Operational Procedure to LockTwistlockinloadpositionwithoutcontainer,handlefacingoutward.1. Fullyunscrewhandnut.2. Loadcontainerontovehicle.3. Turnhandle90°untilindexengaged.4. Fullytightenhandnut.5. Lowerpinbetweenhandnutspokes.

To Unlock1. Liftpinclearofhandnutspokes.2. Unscrewhandnut.3. Raiseheadandturnhandle90ountilindexis engagedandhandleisfacingoutward.4. Removecontainerfromvehicle.5. Turnhandle90otoleftorright.6. Tightenuphandnut.

The Cushion-Lok Twistlock has been designed to secure ISO and special containers to rigid vehicles and trailer chassis. Special polymer pads reduce the metal-to-metal contact between the corner fitting and twistlock, thereby reducing the shock and vibration together with noise.

+44 (0)1388 528 24851BS EN ISO 9001:2008

LRQ 4006347

001

©



TeChniCaL informaTion

Description

Body

Stem

Handnut

Handle

Sleeve

SteelBall

Spring

Grubscrew

3rdLockBracket

3rdLockBolt

Item

1

2

3

4

5

6

7

8

9

10

Qty

1

1

1

1

1

1

1

1

1

1

PartNo

WCI1076

WCI1079

WCI20160

WCI988

WCI989

WCI1236

WCI990/2

WCI1237

WCI949

WCI960

©

© ©

©

William Cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248fax+44(0)1388528879Webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 52


Dovetail twistlock - Type WCI 4483, 4484, WCI 20032


+44 (0)1388 528 248


• Removabletwistlock.• Lowprofilebaseonly28mmhigh.• Designedforasafeworkingloadof15,000kg.

Operational Procedure to Lock1. WeldWCI4484sockettodeck.2. SlideWCI4483twistlockintosocket.3. Indexhandlesothatstemheadisinlinewithshearblock.4. Loadcontainer.5. Indexhandletolocktwistlockhead.

To Unlock1. Indexhandletounlock twistlockhead.2. Unloadcontainer.

A removable Twistlock ideally designed for use on-board a ship’s deck.

53BS EN ISO 9001:2008LRQ 4006347

001

©

©


technical information

Weight 10kg (22lbs)

FINISH:Selfcolour.



©

©

©

©


Steel CaStingS for ContainerSEckbeschläge fur Containers/Pièces de coin des conteneurs

Design and Survey

Entwurf und Begutachtung

Modele et Classification

Chemical Properties

Chemische Eigenschaften

Proprietes Chimiques

Mechanical Properties - Minimum

Mechanische Eigenschaften - Minimum

Proprietes Mecaniques - Minimum

Tensile Tests

Zerreissproben

Essais de Tension

Branding-Identification

Markenbezeichnung - Kennzeichnung

Impression au fer Chaud- Identification

Radiography

Radiografie

Radiographie

The Castings we supply shall be in accordance with the technical requirements of I.S.O. 1161, also the survey of Lloyd’s Register of Shipping or Germanischer Lloyd, as undernoted.

Die Guss-Stücke, die wir beliefern, müssen den technischen Anforderungen von I.S.O. 1161 entsprechen, und underliegen ebenfalls der Begutachtung von Lloyds Schiffsregister, oder Germanischem Lloyd, wie unten erwahnt.

Les pièces que nous fournissons remplissent les conditions techniques requises par I.S.O. 1161, et conformes à la classification de Lloyds Register of Shipping ou Germanischer Lloyd.

The steel used shall contain a minimum of 1.0% Manganese, with Carbon Equivalent of 0.45% maximum calculated by the following formula: Mn + Cr + Mo + V + Ni + CuCarbon Equiv. % = C +

6 5 15

Der verwandte Stahl muss einen Minimumgehalt an 1.0% Mangen aufweisen sowie einen Maximal gleichwert von 0.45% Kohlenstoff, der sich aus folgender Formel errechnet: Mn + Cr + Mo + V + Ni + CuKohlenstoff Gleichwert % = C +

6 5 15

L’acier employé contiendra un minimum de 1% de manganèse avec un maximum de 0.45% d’equivalent de carbone, calculé d’après la formule suivante: Mn + Cr + Mo + V + Ni + CuEquiv. carbone % = C +

6 5 15

Ultimate Tensile Strength -430 - 600 N/mm2 Yield Stress -220 N/mm2

Elongation on 71 mm -25% Reduction of Area -40%

Absolute Dehnungsfestigkeit -430 - 600 N/mm2 Streckpannung -220 N/mm2

Bruchdehnung bei 71 mm -25% Flächenverminderung -40%

Effort de traction maximal -430 - 600 N/mm2 Limite de résistance -220 N/mm2

Elongation sur 71 mm -25% Réduction de superficie -40%

The number of tensile tests taken shall be as agreed between the inspection authority and ourselves.

Die Anzahl der vorgenommenen Zerriessproben soIl so gross sein, wie sie in Ubereinstimmung mit der Aufsichtsbehörde und uns selbst vereinbart wird.

La classification de l’autorité d’inspection et nous-mêmes conviendrons du nombre d’essais de tension à appliquer.

Each casting shall be branded with the mark of the inspection authority, maker’s mark, cast number and I.S.O. 1161.

Jeder Gussteil muss mit dem Kennzeichen von der Aufsichtsbehörde, dem Herstellerkennzeichen, der Gussnummer und I.S.O. 1161 eingerbrannt versehen sein.

Chaque moulage portera l’estampille au fer chaud, de l’autorité d’inspection, du fabricant, le numéro du moulage et le I.S.O. 1161.

An agreed representative quantity of castings shall be selected at random and subjected to the form of examination approved by the inspection authority.

Eine vereinbarte repräsentative Guss-stückmenge muss aufs Geratewohl ausgewählt und sodann einer Metalluntersuchung unterworfen werden, die von der Aufsichtsbehörde gebilligt werden kann.

On conviendra d’une quantité représentative de moulages qui seront sélectionnés au hasard et soumis à l’examen approuvé par I’autorité d’inspection.

Information Sheet No.18, Mitteilungsblatt Nr.18, Feuille d’information 18


+44 (0)1388 528 24855BS EN ISO 9001:2008

LRQ 4006347

001


Non-Destructive Tests - Interpretation

Zerstörungsfreie Werkstoffprofüngen - Auswertung

Essais Non-Destructeurs - Interpretation

Examination - Visual

Prüfung - Optisch

Examen Visuel

Tolerances - Overall Sizes

Gesamt - Einpassgrössen

Tolerances - Dimensions Globales

Inspection - Independent

Einzel - Nachprüfung

Inspection Impartiale

Test Certificates

Prüfungsatteste

Certificats D’essais

Impact Properties

Stossfestigkeits - Eigenschaften

Proprietes D’impact

The interpretation of examination shall be related to our normal quality standard for this type of casting.

Die Auswertung muss im Einklang mit dem normalen Qualitäts-standard für derartige Gussteiltypen vorgenommen werden.

L’interprétation de l’examen sera en rapport avec notre norme habituelle de qualité pour ce type de moulage.

Each casting shall be visually examined for surface defects.

Jeder Gussteil muss optisch geprüft werden, ob nicht Oberflächenmängel vorliegen.

Chaque moulage sera examiné visuellement pour détecter les défaults de surface.

All castings shall be gauged to ensure that they conform to the tolerances and notes on our drawings.

Alle Gussteile müssen abgemessen werden um sicherzustellen, dass sie den Einpassgrössen und Bemerkungen in unseren Zeichnungen entsprechen.

Tous les montages seront calibrés pour garantir qu’ils répondent effectivement aux tolérances et aux notes qui figurent sur nos schémas.

Independent inspection shall be at our Works by Lloyd’s Register or Germanischer Lloyd.

Einzelprüfung wird in unseren Werken von Lloyds Schiffsregister oder Germanischem Lloyd vorgenommen.

Lloyds Register ou Germanischer Lloyd effectuera une inspection impartiale a nos usines.

A certificate, signed on behalf of the inspection authority, shall be sent to the Customer after the castings have been despatched, if requested on order.

Ein Attest, welches im Auftrag von der Aufsichtsbehörde erteilt werden soIl, wird dem Kunden zugesandt, nachdem die Gussteile versandt worden sind.

Un Certificat au nom de la classification de l’autorité d’inspection sera délivré au client aprés expédition des moulages.

The steel shall be of the kind which, with Charpy Vee Notch Tests taken upon separately prepared test bars, gives minimum impact figures of 20.3 Joules at minimum of minus 40°c. If the Corner Castings are intended for service at temperatures below minus 40°c, impact tests shall be carried out in accordance with the inspection authority. In such cases the service temperature is to be specified on the purchase order for Corner fittings.

Der Stahl muss derart beschaffen sein, dass er, bei Charpy Scharfkerbprüfungen, die auf separat bereiteten Prüfungsstangen vorgenommen werden, eine Stossfestigkeit mit einem Minimum von 20,3 in Jouleschen Ziffern aufweist und dies bei einer Minimumtemperatur von minus 40° Celcius. Sollten die Eck-guss-stücke für Dienstleistung bei Temperaturen unter minus 40° Celsius in Betracht gezogen werden, so müssen die Stossfestigkeits-prüfungen im Einklang mit der Aufsichtsbehorde ausgefOhrt werden. In solchen Fällen muss die Leistungs-temperatur im Kaufauftrag für die Eckverbundstücke genau spezifiziert werden.

L’acier, après avoir subi des essais ‘Charpy Vee Notch’ sur des barres d’essai préparées séparemént, doit offrir une résilience minimum de 20,3 Joules à un minimum de température de -40°c. Si les moulages en coin sont destinés a être utilisés à des températures en-dessous Qe -40°c, les essais de choc devront s’effectuer selon la classification de l’autoité d’inspection. Dans ce cas, la temperature d’utilisation prevue doit etre specifiee sur le bulletin de commandes des moulages en coin.

*In respect of this information no warranties may be implied in any manner whatsoever.

*Mit Bezug auf diese Information ist keine Gewährleistung irgenwelcher Art dabei miteinbegriffen.

*Aucune garantie, quelle qu’elle soit, ne peut être impliquée en ce qui conceme ces renseignements.

Steel CaStingS for ContainerSEckbeschläge fur Containers/Pièces de coin des conteneurs


William Cook IntermodalStanhope Co Durham DL13 2YR EnglandPhone +44 (0)1388 528 248 fax +44 (0)1388 528 879Web www.william-cook.co.uk email [email protected] 56


Documents

TwisTlocks for The TransporT indusTry A Twistlock for every … · 2019-03-14 · Rail Wagon Twistlock Type WCI 1965. Interchangeable UIC type design incorporating “twistlock”