TwinLock 7220 / 7260 BioPIN - TwinLock 7220 / 7260 BioPIN General Information on This Manual Manual

  • View
    1

  • Download
    0

Embed Size (px)

Text of TwinLock 7220 / 7260 BioPIN - TwinLock 7220 / 7260 BioPIN General Information on This Manual Manual

  • Version 1.03B

    TwinLock 7220 / 7260 BioPIN Base - and Comfort Systems

    Manual

    DIN EN 1300 M 109317 High Security Lock Class EN B (TwinLock 7260 BioPIN)

    M 109319 G High Security Lock Class EN C (TwinLock 7220 BioPIN)

    G 108061 Hold-up Detector TwinXT

    G 108062 Hold-up Detector TwinAlarm

    G 106016 / G 106015 Blocking Device TwinXT Class C

    G 105133 / G 102013 Ancillary Control Equipment (ACE) TwinAlarm (for IAS/BAS) Class C

  • Imprint TwinLock 7220 / 7260 BioPIN

    2 Manual V.1.03B

    Imprint

    Copyright © März 2010 INSYS MICROELECTRONICS GmbH Any duplication of this manual is prohibited. We appreciate comments and suggestions. All rights on this documentation and the devices are with INSYS MICROELECTRONICS GmbH Regensburg.

    Trademarks

    The use of a trademark not shown below is not an indication that it is freely available for use. Windows™ is a registered trademark of Microsoft Corporation.

    Publisher

    INSYS MICROELECTRONICS GmbH Waffnergasse 8 93047 Regensburg, Germany

    Contact

    Phone: +49(0)941/58 692 22 Fax: +49(0)941//56 34 71

    Email: insys@insys-security.de Internet: http://www.insys-security.de

  • TwinLock 7220 / 7260 BioPIN Table of Contents

    Manual V.1.03B 3

    Table of Contents

    1 General Information on This Manual...................................................... 6

    1.1 Content and Usage....................................................................... 6 1.2 General Qualification for Operating the System.......................... 6 1.3 Text Marks and Formatting.......................................................... 7

    1.3.1 Safety Warnings.........................................................................7 1.3.2 Icons and their Meaning..........................................................7 1.3.3 Operating Instructions.............................................................8

    2 System Description ................................................................................. 9

    2.1 System.......................................................................................... 9 2.1.1 System Diagrams.................................................................... 10 2.1.2 System Components.............................................................. 17

    2.1.2.1 Operating Unit FlatControl BioPIN ............................... 17 2.1.2.2 Lock TwinLock .................................................................... 17 2.1.2.3 Bus Distributor TwinConnect......................................... 17 2.1.2.4 Blocking Device TwinXT................................................... 18 2.1.2.5 ACE TwinAlarm .................................................................. 18 2.1.2.6 Optional Accessories: Chip Cards TwinCard............... 19 2.1.2.7 Survey: Codes in the System........................................... 20

    2.2 Functions Overview.................................................................... 21 2.2.1 Standard Functions ................................................................ 21 2.2.2 Setting Functions with TwinComm USB .......................... 23

    2.3 Intended Use .............................................................................. 24 3 Operation.............................................................................................. 25

    3.1 Basics .......................................................................................... 25 3.1.1 The System Status .................................................................. 26

    3.2 Configuration via Optional Software TwinComm USB .............. 27 3.3 Authorising the Users................................................................. 27

    3.3.1 Boxes of the User Matrix ...................................................... 29

    3.4 Menu Navigation at Operating Unit FlatControl ....................... 30 3.5 PIN Codes.................................................................................... 31

    3.5.1 Types and Numbers of PIN Codes in Every Lock.............. 31 3.5.2 Entering PIN Code................................................................... 32

    3.6 Code Cards.................................................................................. 32 3.6.1 Code Card TwinCard code access ....................................... 32 3.6.2 Inserting a Chip Card into the Operating Unit................ 32

    3.7 Fingerprint Codes ....................................................................... 33 3.8 Operation with CIT Function Selected........................................ 34 3.9 Opening and Closing .................................................................. 34

    3.9.1 Opening a Lock with PIN Code ............................................ 35 3.9.2 Opening a Lock with a Code Card....................................... 35 3.9.3 Entering Fingerprint Code and Opening a Lock .............. 36 3.9.4 Triggering Silent Alarm When Opening a Lock............... 37 3.9.5 Opening a Lock with Dual Code .......................................... 38 3.9.6 Opening a Lock with Timed Unlocking Delay.................. 39 3.9.7 Opening with Timed Delay and Release Time................. 39 3.9.8 Opening Locks with Parallel Code ...................................... 40 3.9.9 Disarming a Burglar Alarm System (BAS)......................... 41

  • Table of Contents TwinLock 7220 / 7260 BioPIN

    4 Manual V.1.03B

    3.9.10 Closing a Lock .......................................................................... 41 3.9.11 Closing a Lock with Code Input........................................... 41 3.9.12 Closing a Lock Automatically with the Door Switch...... 42 3.9.13 Setting / Arming a Burglar Alarm System (BAS) ............. 42

    3.10 Programming System Settings................................................... 43 3.10.1 Setting the Date and the Time of Day............................... 43 3.10.2 Switching On / Off TwinXT or TwinAlarm........................ 44 3.10.3 Setting the CIT Function (2 Groups of Users) .................. 44 3.10.4 Exporting the Protocol (TwinComm USB) ........................ 45 3.10.5 Displaying / Printing the Protocol (TwinComm USB).... 45 3.10.6 Importing the Configuration ............................................... 46 3.10.7 Configuration Import: Error Messages.............................. 47 3.10.8 Exporting the Configuration (TwinComm USB) ............. 49 3.10.9 Selecting a Language............................................................. 49 3.10.10 Importing a Language ........................................................... 50

    3.11 Administrating Users.................................................................. 51 3.11.1 Changing the System Manager Code................................ 51 3.11.2 Changing the Master Code / CIT Master Code................ 52 3.11.3 Registering PIN Code for Users / Operators..................... 53 3.11.4 Changing a PIN Code ............................................................. 54 3.11.5 Deregistering PIN Code ......................................................... 55 3.11.6 PIN Code User Display ........................................................... 56 3.11.7 Registering a Code Card........................................................ 57 3.11.8 Deregistering a Code Card ................................................... 58 3.11.9 Code Card User Display......................................................... 59 3.11.10 Fingerprint: Survey................................................................. 60 3.11.11 Fingerprint: Scan Test............................................................ 61 3.11.12 Fingerprint: Determining Min. Minutiae.......................... 62 3.11.13 Fingerprint: Image Quality ................................................... 63 3.11.14 Fingerprint: Security Level.................................................... 64 3.11.15 Registering Fingerprint Code............................................... 65 3.11.16 Deregistering Fingerprint Code .......................................... 66 3.11.17 Fingerprint User Display ....................................................... 67

    3.12 Service ........................................................................................ 69 3.12.1 Supplying Power in Case of Power Breakdown............... 69 3.12.2 Displaying Status / Info about the System ...................... 69 3.12.3 Service Reset ............................................................................ 70 3.12.4 Motor Service........................................................................... 72 3.12.5 Registering a New Lock ......................................................... 73

    3.12.5.1 Additional New Lock......................................................... 73 3.12.5.2 Changing a Lock................................................................. 74

    3.12.6 Locking the System despite Defect Bolt Work Contact. 75 3.12.7 Fingerprint Status / Info ....................................................... 75 3.12.8 Fingerprint: Displaying / Modifying Temperature......... 76

    4 Cleaning ................................................................................................ 76 5 Trouble Shooting .................................................................................. 77

    5.1 Error Messages ........................................................................... 77 6 Support ............................................................................