3
TWIN HOOK SYSTEMS Henriksen Twin hook system has proven to be the best system for launch and recovery of large workboats for navies and the offshore industry. The system is based on the same principles as our traditional Henriksen single point lift. TWIN HOOKS SYSTEMS HOOK HMKTW* RING HLR / HLRE SWIVEL JOINT HSL TWIN HOOK We deliver twin systems for different types of crafts in several versions. The system can be operated manually, pneumatic or electrically. We can also integrate the painter hook in to the system. This will reduce the risk of operational danger when launch and recover the boat. The hooks are off-load hooks (inherently safe system) and a twin system is the safest way to launch a tender, interceptor or workboat which does not require approval as a lifeboat/FRC. LIFTING RINGS We supply Henriksen original lifting rings for all Henriksen hooks. They are safe and easy to operate with handles that provide a good grip. We strongly recommend the use of our Henriksen lifting rings with our Henriksen hooks as these have geometry that is designed to fit together. OPERATION OF AN OFF-LOAD HOOK Launch 1. When the boat is being lowered down and is close to water level, activate the twin release system. 2. When the boat is waterborne, the hooks automatically release the lifting rings. Recovery 1. Prepare the hooks for recovery by resetting the system. 2. Grab the lifting rings and connect them by pushing them into the hooks. INTEGRATED HENRIKSEN SYSTEM All Henriksen HMK hooks can be used in combination with an Integrated Henriksen System (IHS) and a painter hook. We recommend using a IHS system anywhere applicable as it removes the possibility of certain major operator errors and thereby significantly reduces operational risk. All materials used in the Henriksen Hooks are high quality and suitable for marine environment (saltwater proof). The hooks are made of stainless steel and duplex steel. All hooks are delivered in a practical wooden box. 37

TWIN HOOK SYSTEMS€¦ · launch and recover the boat. The hooks are off-load hooks (inherently safe system) and a twin system is the safest way to launch a tender, interceptor or

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

Page 1: TWIN HOOK SYSTEMS€¦ · launch and recover the boat. The hooks are off-load hooks (inherently safe system) and a twin system is the safest way to launch a tender, interceptor or

TWIN HOOK SYSTEMSHenriksen Twin hook system has proven to be the best system for launch and recovery of large workboats for navies and the offshore industry. The system is based on the same principles as our traditional Henriksen single point lift.

TWIN HOOKS SYSTEMS

HOOK HMKTW*RING HLR / HLRESWIVEL JOINT

HSL

TWIN HOOKWe deliver twin systems for different types of crafts in several versions. The system can be operated manually, pneumatic or electrically. We can also integrate the painter hook in to the system. This will reduce the risk of operational danger when launch and recover the boat.

The hooks are off-load hooks (inherently safe system) and a twin system is the safest way to launch a tender, interceptor or workboat which does not require approval as a lifeboat/FRC.

LIFTING RINGSWe supply Henriksen original lifting rings for all Henriksen hooks. They are safe and easy to operate with handles that provide a good grip. We strongly recommend the use of our Henriksen lifting rings with our Henriksen hooks as these have geometry that is designed to fit together.

OPERATION OF AN OFF-LOAD HOOKLaunch1. When the boat is being lowered down and is close to water level, activate the

twin release system.2. When the boat is waterborne, the hooks automatically release the lifting rings.Recovery1. Prepare the hooks for recovery by resetting the system.2. Grab the lifting rings and connect them by pushing them into the hooks.

INTEGRATED HENRIKSEN SYSTEMAll Henriksen HMK hooks can be used in combination with an Integrated Henriksen System (IHS) and a painter hook. We recommend using a IHS system anywhere applicable as it removes the possibility of certain major operator errors and thereby significantly reduces operational risk.

• All materials used in the Henriksen Hooks are high quality and suitable for marine environment (saltwater proof). The hooks are made of stainless steel and duplex steel.

• All hooks are delivered in a practical wooden box.

C:\_Vault\Designs\HOOKS\Catalog\Hooks Product range 2015.idw

TordT

+

DESIGNED BY:

1 / 1 - A1EDITION SHEET - SIZE

DATE:07.08.2015

PROJ. METHOD:

UNLESS OTHERWISE STATED, TOLERANCE:DIM.: ISO-2768-1-m THREADS: 6g/6H SURFACE: Ra 3,2 EDGE 0,2 x 45°

MATERIAL: SURFACE TREATMENT: N/A

APPROX. MASS: N/ABASE ITEM:

PART NUMBER:HH000027

DESCRIPTION:HMKST 5.0, MOB-Hook, WLL 5.0 T

DATE APPROVED:

This document is proprietary information of H. Henriksen Mek. Verksted AS and shall not be copied without our written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose.

HMKST ( 3,5 / 5 / 8 / 15 ) HMKG ( 3,5 / 5 / 8 / 12 / 15 / 22,5 ) HMKR ( 3,5 / 5 / 8 / 12 / 15 )

HMKRW ( 3,5 / 5 / 8 / 15 )

HMKRHB ( 3,5 / 5 / 8 )

HMKRHF ( 15 ) HMKRWH ( 3,5 / 5 / 8 / 15 ) HMKRHI (12)

NORHMK ( 5 / 10 / 15 )

HCH ( 1,5 / 3,5 / 6,5 / 10 )HMKF ( 3,5 / 5 / 8 / 15 )

HENRIKSEN HOOKSProduct range

HRH (1,5)

HPH ( 2,5 / 5 / 10 ) HSL ( 2,5 / 5 / 8 / 12 / 15 ) ADAPTER ( 2,5 / 5 / 8 / 12 / 15 ) HLR ( 1,5 / 3,5 / 5 / 8 / 10 / 12 / 15 ) Release handle HMKR_ hooks Release handle Painter

Protection bar HMKST hooks IHS ( 3,5 / 5 / 8 / 12 / 15 )

HMKTWE ( 5 / 8 / 12 )HMKTW ( 3,5 / 5 / 8 / 15 )

HMKTWV ( 3,5 / 5 / 8 / 15 )

Air compressor 12V or 24V

HMKTWP ( 12 / 15 )

Bolts and Nuts for all hooks

37

Page 2: TWIN HOOK SYSTEMS€¦ · launch and recover the boat. The hooks are off-load hooks (inherently safe system) and a twin system is the safest way to launch a tender, interceptor or

H. Henriksen ASTræleborgveien 153112 TønsbergPhone: 333 78 400Mail: [email protected]

The HOOKS on this page are all tested and delivered with product certificates.

For more information please visit: www.hhenriksen.com

TWIN HOOK SYSTEM SAFETY

SYNCHRONIZEDWhen lifting a vessel with a twin hook setup, it is important that the hooks are synchronized so that both hooks open and close at the same time. All our twin hook systems are designed this way.

ONE HOOK IS OFF-LOADED: BOTH HOOK STAY CLOSEDAll of our twin hook systems are designed with a connection between the two hooks that ensures that both hooks will stay closed if only one of the two are off-loaded.

BOTH HOOKS ARE OFF-LOADED: BOTH HOOKS OPENAll of our twin hook systems are designed with a connection between the two hooks that ensures that both hooks will open at the same time.

TWIN SYSTEM WITH IHSAll twin systems can be delivered with a painter in a IHS configuration for a even safer operation.

38

Page 3: TWIN HOOK SYSTEMS€¦ · launch and recover the boat. The hooks are off-load hooks (inherently safe system) and a twin system is the safest way to launch a tender, interceptor or

H. Henriksen ASTræleborgveien 153112 TønsbergPhone: 333 78 400Mail: [email protected]

The HOOKS on this page are all tested and delivered with product certificates.

For more information please visit: www.hhenriksen.com

HMKTW* / HHSRT TWIN HOOK SYSTEMS

HMKTWManual Simultaneous Release Twin System(7 / 10 / 16 / 30)

HMKTWVRemote Simultaneous Release Twin System with vertical cable entry(7 / 10 / 16 / 30)

HHSRTElectric Simultaneous Release Twin System(24)

C:\_Vault\Designs\HOOKS\Catalog\Hooks Product range 2015.idw

TordT

+

DESIGNED BY:

1 / 1 - A1EDITION SHEET - SIZE

DATE:07.08.2015

PROJ. METHOD:

UNLESS OTHERWISE STATED, TOLERANCE:DIM.: ISO-2768-1-m THREADS: 6g/6H SURFACE: Ra 3,2 EDGE 0,2 x 45°

MATERIAL: SURFACE TREATMENT: N/A

APPROX. MASS: N/ABASE ITEM:

PART NUMBER:HH000027

DESCRIPTION:HMKST 5.0, MOB-Hook, WLL 5.0 T

DATE APPROVED:

This document is proprietary information of H. Henriksen Mek. Verksted AS and shall not be copied without our written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose.

HMKST ( 3,5 / 5 / 8 / 15 ) HMKG ( 3,5 / 5 / 8 / 12 / 15 / 22,5 ) HMKR ( 3,5 / 5 / 8 / 12 / 15 )

HMKRW ( 3,5 / 5 / 8 / 15 )

HMKRHB ( 3,5 / 5 / 8 )

HMKRHF ( 15 ) HMKRWH ( 3,5 / 5 / 8 / 15 ) HMKRHI (12)

NORHMK ( 5 / 10 / 15 )

HCH ( 1,5 / 3,5 / 6,5 / 10 )HMKF ( 3,5 / 5 / 8 / 15 )

HENRIKSEN HOOKSProduct range

HRH (1,5)

HPH ( 2,5 / 5 / 10 ) HSL ( 2,5 / 5 / 8 / 12 / 15 ) ADAPTER ( 2,5 / 5 / 8 / 12 / 15 ) HLR ( 1,5 / 3,5 / 5 / 8 / 10 / 12 / 15 ) Release handle HMKR_ hooks Release handle Painter

Protection bar HMKST hooks IHS ( 3,5 / 5 / 8 / 12 / 15 )

HMKTWE ( 5 / 8 / 12 )HMKTW ( 3,5 / 5 / 8 / 15 )

HMKTWV ( 3,5 / 5 / 8 / 15 )

Air compressor 12V or 24V

HMKTWP ( 12 / 15 )

Bolts and Nuts for all hooks

C:\_Vault\Designs\HOOKS\Catalog\Hooks Product range 2015.idw

TordT

+

DESIGNED BY:

1 / 1 - A1EDITION SHEET - SIZE

DATE:07.08.2015

PROJ. METHOD:

UNLESS OTHERWISE STATED, TOLERANCE:DIM.: ISO-2768-1-m THREADS: 6g/6H SURFACE: Ra 3,2 EDGE 0,2 x 45°

MATERIAL: SURFACE TREATMENT: N/A

APPROX. MASS: N/ABASE ITEM:

PART NUMBER:HH000027

DESCRIPTION:HMKST 5.0, MOB-Hook, WLL 5.0 T

DATE APPROVED:

This document is proprietary information of H. Henriksen Mek. Verksted AS and shall not be copied without our written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose.

HMKST ( 3,5 / 5 / 8 / 15 ) HMKG ( 3,5 / 5 / 8 / 12 / 15 / 22,5 ) HMKR ( 3,5 / 5 / 8 / 12 / 15 )

HMKRW ( 3,5 / 5 / 8 / 15 )

HMKRHB ( 3,5 / 5 / 8 )

HMKRHF ( 15 ) HMKRWH ( 3,5 / 5 / 8 / 15 ) HMKRHI (12)

NORHMK ( 5 / 10 / 15 )

HCH ( 1,5 / 3,5 / 6,5 / 10 )HMKF ( 3,5 / 5 / 8 / 15 )

HENRIKSEN HOOKSProduct range

HRH (1,5)

HPH ( 2,5 / 5 / 10 ) HSL ( 2,5 / 5 / 8 / 12 / 15 ) ADAPTER ( 2,5 / 5 / 8 / 12 / 15 ) HLR ( 1,5 / 3,5 / 5 / 8 / 10 / 12 / 15 ) Release handle HMKR_ hooks Release handle Painter

Protection bar HMKST hooks IHS ( 3,5 / 5 / 8 / 12 / 15 )

HMKTWE ( 5 / 8 / 12 )HMKTW ( 3,5 / 5 / 8 / 15 )

HMKTWV ( 3,5 / 5 / 8 / 15 )

Air compressor 12V or 24V

HMKTWP ( 12 / 15 )

Bolts and Nuts for all hooks

ELP

AWARELIGHT

L&R

PAINTER

HOOK(S)

HOLD

SOUNDLIGHTS

C:\_Vault\Designs\HOOKS\Catalog\HHSR Catalog.idw

AudunAB

+

DESIGNED BY:

1 / 1 - A4REVISION: SHEET-SIZE:

DATE:2016-04-06

PROJ. METHOD:

UNLESS OTHERWISE STATED, TOLERANCE:DIM.: ISO-2768-1-m THREADS: 6g/6H SURFACE: Ra 3,2 EDGE 0,2 x 45°

MATERIAL: SURFACE TREATMENT: N/A

APPROX. MASS: 41,474 kgBASE ITEM:

PART NUMBER:HH000129

PART NAME:

HHSR 12T

DATE APPROVED:

This document is proprietary information of H. Henriksen AS and shall not be copied without our written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose.

F

B

A

E

D

G

H

C

C:\_Vault\Designs\HOOKS\Catalog\HHSR Catalog.idw

AudunAB

+

DESIGNED BY:

1 / 1 - A4REVISION:SHEET-SIZE:

DATE:2016-04-06

PROJ. METHOD:

UNLESS OTHERWISE STATED, TOLERANCE:DIM.: ISO-2768-1-m THREADS: 6g/6H SURFACE: Ra 3,2 EDGE 0,2 x 45°

MATERIAL: SURFACE TREATMENT: N/A

APPROX. MASS: 41,474 kg BASE ITEM:

PART NUMBER:HH000129

PART NAME:

HHSR 12T

DATE APPROVED:

This document is proprietary information of H. Henriksen AS and shall not be copied without our written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose.

F

B

A

ED

G

H

C

HMKTWEElectric Simultaneous Release Twin System(10 / 16 / 24)

C:\_Vault\Designs\HOOKS\Catalog\Hooks Product range 2015.idw

TordT

+

DESIGNED BY:

1 / 1 - A1EDITION SHEET - SIZE

DATE:07.08.2015

PROJ. METHOD:

UNLESS OTHERWISE STATED, TOLERANCE:DIM.: ISO-2768-1-m THREADS: 6g/6H SURFACE: Ra 3,2 EDGE 0,2 x 45°

MATERIAL: SURFACE TREATMENT: N/A

APPROX. MASS: N/ABASE ITEM:

PART NUMBER:HH000027

DESCRIPTION:HMKST 5.0, MOB-Hook, WLL 5.0 T

DATE APPROVED:

This document is proprietary information of H. Henriksen Mek. Verksted AS and shall not be copied without our written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose.

HMKST ( 3,5 / 5 / 8 / 15 ) HMKG ( 3,5 / 5 / 8 / 12 / 15 / 22,5 ) HMKR ( 3,5 / 5 / 8 / 12 / 15 )

HMKRW ( 3,5 / 5 / 8 / 15 )

HMKRHB ( 3,5 / 5 / 8 )

HMKRHF ( 15 ) HMKRWH ( 3,5 / 5 / 8 / 15 ) HMKRHI (12)

NORHMK ( 5 / 10 / 15 )

HCH ( 1,5 / 3,5 / 6,5 / 10 )HMKF ( 3,5 / 5 / 8 / 15 )

HENRIKSEN HOOKSProduct range

HRH (1,5)

HPH ( 2,5 / 5 / 10 ) HSL ( 2,5 / 5 / 8 / 12 / 15 ) ADAPTER ( 2,5 / 5 / 8 / 12 / 15 ) HLR ( 1,5 / 3,5 / 5 / 8 / 10 / 12 / 15 ) Release handle HMKR_ hooks Release handle Painter

Protection bar HMKST hooks IHS ( 3,5 / 5 / 8 / 12 / 15 )

HMKTWE ( 5 / 8 / 12 )HMKTW ( 3,5 / 5 / 8 / 15 )

HMKTWV ( 3,5 / 5 / 8 / 15 )

Air compressor 12V or 24V

HMKTWP ( 12 / 15 )

Bolts and Nuts for all hooks

Materials High quality stainless steel

Warranty 5 years (When the re-certification and annual inspection is followed)

Documentation Certificates, Installation-, Operation-, and Maintenance Manual

Packaging Wooden case

Optional Accessories • Certified bolts and nuts• Henriksen Swivel Joint• Henriksen Lifting Ring• Integrated Henriksen System (IHS)

39