Tutorial Sub D

7/27/2019 Tutorial Sub D

1/8

Maya-Modeling a Wash Basin with SubdivisionsYad| Jun 26, 2010 | Comments 0

This video tutorial will carry you throughout the Maya at beginners to intermediate level. After this tutorial you will be able to model an interior architectural model with

subdivisions and assign a texture to the subdivision model.

Lets startour modeling with subdivisions in Maya. Well model an interior architectural object and that is a Wash Basin. We choose Modeling this wash basin for this tutorial

because we wanted to teach you the use of particle flow for water and other type liquids. First we have started our object by creating a new project as you saw in

previous part of this lesson. In this part we a re going to model a Wash basin with subdivisions.

Lets start now,

1. Go to Create Menu Subdivisions Cube

2. Hit 5 key on keyboard for shaded mode of the object

3. Hit 3 key on keyboard for smooth mesh of the object

And you should have this Cube

4. Scale on Z axis with scale tool or put the value of 3 in channel box for Z scale.
http://www.freemayavideotutorials.com/maya-modeling/maya-subdivision-modeling/modeling-a-wash-basin-with-subdivisions.htmlhttp://www.freemayavideotutorials.com/author/adminhttp://www.freemayavideotutorials.com/author/adminhttp://www.freemayavideotutorials.com/maya-modeling/maya-subdivision-modeling/modeling-a-wash-basin-with-subdivisions.htmlhttp://www.freemayavideotutorials.com/author/adminhttp://www.freemayavideotutorials.com/maya-modeling/maya-subdivision-modeling/modeling-a-wash-basin-with-subdivisions.htmlhttp://www.freemayavideotutorials.com/maya-modeling/maya-subdivision-modeling/modeling-a-wash-basin-with-subdivisions.html


2/8

5. Select 4 faces from side. See image below,

6. Go to Edit Mesh Menu > Extrude Face

7. Move Extruded face outwards. See image below,

8. Select bottom faces of the object. See image below,

9. Move both of the faces downwards. See image below,


3/8

10. Select both top faces at a time, see image below

11. Go to Edit Mesh > Extrude Face,

12. Scale uniformly inwards, see image below,

13. Leave faces selection and Go to edges mode and move both sides edges so that you make all four sides equal distance from central faces.


4/8

14. Then again select top two faces. See image below,


16. Move Both faces Downward after extrusion. See image below,

17. Select 4 top-back-faces. See image below,


19. Move Faces upwards

20. Again Go to Edit Mesh Menu and > Extrude Face or press G key on keyboard


5/8

21. Dont do anything like scale, rotate or move after this extrusion. See the image below,

22. Select back-bottom-faces. See image below,

23. Get Extrude Too and move back faces downwards,

24. Try to make a shape of your own desire, you will just extrude these two bottom faces again and again and you can move, scale and rotate them. See image below,

25. Create a Poly cylinder and place it on the basin in top view. See image below,

26. Go to vertex mode and select half side vertices and move them apart from the central one vertex. See image below,


6/8

27. Go to the perspective view select base object and bevel it. For bevel tool Go to Edit Mesh Menu and choose Bevel,

28. Create another cylinder,

29. Fit another cylinder in it,


7/8

30. Bevel the big cylinder as well. Go to Edit Mesh> Bevel,

31. Enlarge the small cylinder for making a water tap. See image below,

32. Increase its subdivision height,

33. Select top faces of the cylinder with paint selection tool,

34. Go to Edit Mesh Menu > Extrude Face,

35. Rotate them on Z axis 30 degree

36. Repeat the same actions, extruding them, rotating them 30 degree, see the image below,


8/8

37. Try to make a water tap or shower like shape. Its up to your own idea. If you dont have any idea then watch the movie of this tutorial. See image below,

Assign a ceramics texture to the Basin object and any of your desired material to the water tap object.

Right click on object and get, Assign New Material,

Documents

Tutorial Sub D