Upload
hada
View
77
Download
9
Tags:
Embed Size (px)
DESCRIPTION
Tutorial 8: Add a Wale Beam. Deep Excavation LLC. DeepXcav 2011 – Advanced course. 1. INTRODUCTION . - PowerPoint PPT Presentation
Citation preview
Deep excavation software • Geotechnical and foundation engineering • Advanced Engineering Services
Corso Paratie, Milano 30 settembre 2009
Tutorial 8: Add a Wale Beam
Deep Excavation LLCDeepXcav 2011 – Advanced course 1
Deep excavation software • Geotechnical and foundation engineering • Advanced Engineering Services
Corso Paratie, Milano 30 settembre 2009
DeepXcav is a software program for braced excavations in soils with 2D limit-equilibrium and non-linear analysis methods, and structural verification of all elements (with AISC, ASD, Eurocodes).
It offers the ability to analyze walls with multiple braces (tiebacks) in multilayered soils.
The non-linear analysis considers elastoplastic behavior for the whole soil-wall-support system.
The program also offers the ability to perform traditional limit-equilibrium analyses.
The graphical interface is completely interactive and the input is simplified to a great extend.
The program utilizes archives of wall types, structural and soil materials, ground anchors etc.
The analysis can be performed in either an utlimate state or at a service state (allowable design or LRFD).
The program offers the ability to automatically set all critical settings according to the desired design methodology.
The program also offers the ability to perform slope stability analyses with soil nails. Corso Paratie, Milano 30 settembre 2009
INTRODUCTION
DeepXcav 2011 – Advanced course 2
Deep excavation software • Geotechnical and foundation engineering • Advanced Engineering Services
Corso Paratie, Milano 30 settembre 2009
Change the Surface Level to 100 m Go to the General Tab
and press the Move Model Elevation
button
Change the Elevation to 100 m and select All Boreholes
Press Ok
DeepXcav 2011 – Advanced course
Deep excavation software • Geotechnical and foundation engineering • Advanced Engineering Services
Corso Paratie, Milano 30 settembre 2009
Edit Wall Properties
Double-click on the wall Change
Wall Depth to
16m
Press Ok
DeepXcav 2011 – Advanced course
Deep excavation software • Geotechnical and foundation engineering • Advanced Engineering Services
Corso Paratie, Milano 30 settembre 2009
Add a new Stage and excavate 3mGo to the
Model Tab Change right Elevation to
97m
Click to Add a new Stage
DeepXcav 2011 – Advanced course
Deep excavation software • Geotechnical and foundation engineering • Advanced Engineering Services
Corso Paratie, Milano 30 settembre 2009
Click to Add a new Stage
Select the Add a
tieback tool
Click on the wall and on the soil to add the tieback
Add a new Stage and add a tieback
DeepXcav 2011 – Advanced course
Deep excavation software • Geotechnical and foundation engineering • Advanced Engineering Services
Corso Paratie, Milano 30 settembre 2009
Change tieback
elevation to 97.5m
Change tieback angle
to 20 deg
Press Ok
Edit Support Data
DeepXcav 2011 – Advanced course
Deep excavation software • Geotechnical and foundation engineering • Advanced Engineering Services
Corso Paratie, Milano 30 settembre 2009
Add a Wale Beam
Go to the Loads/supports Tab
Click to add a Wale Beam
Click o the support
DeepXcav 2011 – Advanced course
Deep excavation software • Geotechnical and foundation engineering • Advanced Engineering Services
Corso Paratie, Milano 30 settembre 2009
Edit Waler Data
Click to Edit the Wale Section
DeepXcav 2011 – Advanced course
Deep excavation software • Geotechnical and foundation engineering • Advanced Engineering Services
Corso Paratie, Milano 30 settembre 2009
Edit Wale Section Data
Select to Auto Rotate the Wale
Section
Select to use Multiple Beams
Specify the number of
Beams
Specify the clearance between
the BeamsSelect a Section
Press Ok
DeepXcav 2011 – Advanced course
Deep excavation software • Geotechnical and foundation engineering • Advanced Engineering Services
Corso Paratie, Milano 30 settembre 2009
Choose the Loading Type
Choose the Vertical Spacing
Choose the Axial Force
Press Ok
DeepXcav 2011 – Advanced course
Deep excavation software • Geotechnical and foundation engineering • Advanced Engineering Services
Corso Paratie, Milano 30 settembre 2009
Add a new Stage and Excavate 4m
Click to add a new Stage
Change right Elevation to
94mChange Water Elevation to
94m
Deep excavation software • Geotechnical and foundation engineering • Advanced Engineering Services
Corso Paratie, Milano 30 settembre 2009
Calculate the Design Section
Press the Calculate the selected Design Section
button
Deep excavation software • Geotechnical and foundation engineering • Advanced Engineering Services
Corso Paratie, Milano 30 settembre 2009
Wale Beam ResultsGo to the Results and Results for all stages
Tabs
Click Ok
Double-click on the Waler
Deep excavation software • Geotechnical and foundation engineering • Advanced Engineering Services
Corso Paratie, Milano 30 settembre 2009
Add a new Design Section
Click to add a new Design Section
Deep excavation software • Geotechnical and foundation engineering • Advanced Engineering Services
Corso Paratie, Milano 30 settembre 2009
Change the Wale Section
Double-click to Edit the Wale Data
Click to Edit the Wale Section
DeepXcav 2011 – Advanced course
Deep excavation software • Geotechnical and foundation engineering • Advanced Engineering Services
Corso Paratie, Milano 30 settembre 2009
Add a concrete Section
Select to use a concrete Section
Select a Section
Add reinforcement
properties
Press Ok
Deep excavation software • Geotechnical and foundation engineering • Advanced Engineering Services
Corso Paratie, Milano 30 settembre 2009
Calculate the Design Section
Press the Calculate the selected Design Section
button
Deep excavation software • Geotechnical and foundation engineering • Advanced Engineering Services
Corso Paratie, Milano 30 settembre 2009
Wale Beam ResultsGo to the Results and Results for all stages
Tabs
Click Ok
Double-click on the Waler