Tutorial 1 - How to Steel Detail a Crushing Station

8/13/2019 Tutorial 1 - How to Steel Detail a Crushing Station

1/73

1 | P a g e

THE STEEL DETAILER

V 3.02012

TUTORIAL 1

HOW TO DETAIL A

CRUSHING STATION

Date Revision Description

8/3/2013 A INITIAL ISSUE


2/73

2 | P a g e

CONTENTSLESSON 1 - How to Install your Tutorial

LESSON 2 - Project Log-In and Insert Driving Sketch Frame

LESSON 3 - Insert Columns and Duplicate Members

LESSON 4 - Insert Beams

LESSON 5 - Copy Connections

LESSON 6 - Copy Member

LESSON 7 - Punch Holes

LESSON 8 - Insert and Duplicate Bracing

LESSON 9 - Insert Stairs

LESSON 10 - Insert Handrails

LESSON 11 - Insert Crusher

LESSON 12 - Copy Project

LESSON 13 - Lock Members

LESSON 14 - Creating General Arrangements

LESSON 15 - Update Drawing Revisions and Create PDFs

LESSON 16 - Create Reports


3/73

3 | P a g e

LESSON 1 HOW TO INSTALL THE TUTORIAL

PREREQUISITES

SolidWorks 2012 or 2013 Installed. The Steel Detailer V3.0 Server or V4.0 Server Installed The Steel Detailer Member Library to be empty (Refer STEP 1)

VIDEO - http://www.youtube.com/watch?v=6KXcSM75600

STEP 1 If you have already uploaded Library Members before otherwise jump to LESSON 2

Follow Step 1 and Backup Your Database

Download and Install Microsoft SQL 2005 Management Studio SP3.0 For more

information refer to The Steel Detailer Manual

http://www.microsoft.com/en-au/download/details.aspx?id=14630

1.1 Start The Management Studio inStart/All Programs

Select the local instance to Which TheSteel Detailer Database id installed. Andthen Select Connect.

1.2 Select Server objects and thenBack Up a Database
http://www.youtube.com/watch?v=6KXcSM75600http://www.youtube.com/watch?v=6KXcSM75600http://www.youtube.com/watch?v=6KXcSM75600http://www.microsoft.com/en-au/download/details.aspx?id=14630http://www.microsoft.com/en-au/download/details.aspx?id=14630http://www.microsoft.com/en-au/download/details.aspx?id=14630http://www.microsoft.com/en-au/download/details.aspx?id=14630http://www.microsoft.com/en-au/download/details.aspx?id=14630http://www.youtube.com/watch?v=6KXcSM75600


4/73

4 | P a g e

1.3 Select TheSteelDetailer for theDatabase. Then Select Add.

1.4 Select Add then the . Button

1.5 Select a file location that you will remember.

Name the Filename and place a date at the end.

Select OK 3 times.


5/73

5 | P a g e

1.6 Expand the Object Explorer out to see theMemberLibrary Table

Right Mouse Click and Select Open Table

1.7 Select holding down the shift key 1 thru and the last record and delete the records.

Once there are empty rows, close Microsoft SQL Server 2005 Management Studio. You are readyto install the Tutorial


6/73

6 | P a g e

1.8 Backup Your Member Library Archives.

You can find where the library archives are by selecting the link below

C:\Windows\TSD Member Library Database Location.txt

Browse to the folder that is called Member Library and rename it to Member Library2.

This will also ensure that you keep a copy of the old Archives.

STEP 2 Download Tutorial 1 for your country.

STEP 3 Right mouse Click and Select Run as Administrator

STEP 4 Select Next
http://c/Windows/TSD%20Member%20Library%20Database%20Location.txthttp://c/Windows/TSD%20Member%20Library%20Database%20Location.txthttp://c/Windows/TSD%20Member%20Library%20Database%20Location.txt


7/73

7 | P a g e

STEP 5 Accept the terms and then SelectNext

STEP 6 Select the Local Install SQL ExpressInstance. In some situations it will have thename of your PC and then SQL Express. Selectthis if the other is not available.

Leave the preset settings and

Select Next.

STEP 7 Select Install


8/73

8 | P a g e

The following File Structure and files have been installed for the tutorial

C:\The Steel Detailer \ TSD Australian Trial Tutorials Depending on Country Installed.

The following Members have been added to the Weldment Member Library
http://c/The%20Steel%20Detailer/http://c/The%20Steel%20Detailer/http://c/The%20Steel%20Detailer/


9/73

9 | P a g e

LESSON 2 PROJECT LOGIN AND INSERT DRIVING SKETCH PREREQUISITES

LESSON 1 Completed Installed the TSD Tutorial for 2012 OR 2013

VIDEO - http://www.youtube.com/watch?v=kQ9XGy-wJZw

STEP 1 Select TSDProjects TSD Login

STEP 2 Select Project 9999
http://www.youtube.com/watch?v=kQ9XGy-wJZwhttp://www.youtube.com/watch?v=kQ9XGy-wJZwhttp://www.youtube.com/watch?v=kQ9XGy-wJZwhttp://www.youtube.com/watch?v=kQ9XGy-wJZw


10/73

10 | P a g e

STEP 3 Select WBS Code AA, TUTORIAL PROJECT

STEP 4 Select LOG-IN

STEP 5 Ensure 9999-AA is open and Select Top Plane and Select Create Sketch


11/73

11 | P a g e

STEP 6 Insert SketchPoint on Origin

You can rename thesketch to anything youlike

STEP 7 Select TSDMembers menu, select FRAMES

STEP 8 Select the Model Picture of the Frame


12/73

12 | P a g e

STEP 9 Select the Sketch Point Radial Button

STEP 10 *Select the Sketch Point inthe Graphics Area

STEP 11 Select the Green Tick

STEP 12 Select the Red X or press Escape to close the Member window after the frame has beeninserted.


13/73

13 | P a g e

LESSON 3 INSERT COLUMNS AND DUPLICATE MEMBERS

PREREQUISITES

LESSON 2 Completed

VIDEO - http://www.youtube.com/watch?v=f8XUKKsBPvg

STEP 1 Select TSDMembers menu, Select Columns

STEP 2 Select the Model Picture of the Column

STEP 3 Select Sketch FrameVertical Sketch Segment
http://www.youtube.com/watch?v=f8XUKKsBPvghttp://www.youtube.com/watch?v=f8XUKKsBPvghttp://www.youtube.com/watch?v=f8XUKKsBPvghttp://www.youtube.com/watch?v=f8XUKKsBPvg


14/73

14 | P a g e

STEP 4 Select Green Tick

STEP 5 Repeatstep 2,3 &4 toinsert thenext column.

STEP 6 Select the Red X or press Escape to close the Member window after the columnshave been inserted.

STEP 7 Rebuild and Save

STEP 8 Select the 2unrequiredcleats onColumn 001BasePlateConnectionandSuppressthem


15/73

15 | P a g e

STEP 9 Selectthe 4 sketches

associatedwith theunrequiredcleats andhide them

STEP 10 EditThe MemberSketch Next toEach Cleat inthe COLUMNWeldmentMemberBasePlateConnection

STEP 11 Makethe MemberSketch line

PARALLEL tothe framelayout sketch.The sketch willbe fullydefined. Dothis for bothbrace cleats inthe column.


16/73

16 | P a g e

STEP 12

Repeat step 8-11 for Column2. Your 2columns willnow look likethis

STEP 13 Select TSDMembers Menu and DuplicateMember

STEP 14 Select

the main SteelSection in theModel of theWeldmentMember toDuplicate

STEP 15 Selectthe MemberSketch FrameVertical LegDIAGONALY inopposite corner.


17/73

17 | P a g e

STEP 16 Select the Tick

STEP 17 Delete the duplicate mate that aligns the duplicated column

STEP 18 Rotate the duplicated column to the correct orientation by flipping the alignment of theParallel mate


18/73

18 | P a g e

STEP 19 Repeat Step 14. Thru 18. on the opposite column. Your model will look like this


19/73

19 | P a g e

LESSON 4 INSERT AND DUPLICATE BEAMS

PREREQUISITES

LESSON 3 Completed

VIDEO - http://www.youtube.com/watch?v=uWB9pLsV8a8

STEP 1 Select TSDMembers menu, Select Beams

STEP 2 Select the 1 st Model Picture of the Beam

STEP 3 SelectSketch FrameHorizontal SketchSegment
http://www.youtube.com/watch?v=uWB9pLsV8a8http://www.youtube.com/watch?v=uWB9pLsV8a8http://www.youtube.com/watch?v=uWB9pLsV8a8http://www.youtube.com/watch?v=uWB9pLsV8a8


20/73

20 | P a g e


STEP 5 Select the Red X or press Escape to close the Member window after the beam has beeninserted.

STEP 6 Select The Beam MemberAssembly 9999-AABE001 and theFrame Member Assembly holdingctrl down Right Mouse Click andselect Isolate

STEP 7 In Beam 9999-AABE001Right Mouse Select the CN05-CP02 Sketch and Edit Sketch from the flyout toolbar.


21/73

21 | P a g e

STEP 8 On the Right end of the Beam select the sketch point and DELETE any existing relationshipsand place it over the intersecting point of the frame

STEP 9 Do this also for CN04-CP02


22/73

22 | P a g e

STEP 10 And AlsoCN03-BR01

STEP 11 Select TSDMembers menu and then Duplicate Member

STEP 12 Select the MainSelection on the Beam


23/73

23 | P a g e

STEP 13 Then select theSketch segment line on

the far end


STEP 15 Select TSDMembers menu and Select Beams

STEP 16 Select the Second Beam Model type


24/73

24 | P a g e

STEP 17 Select the FarLeft top sketch segment



25/73

25 | P a g e

LESSON 5 COPY CONNECTIONS

PREREQUISITES

LESSON 4 Completed

VIDEO - http://www.youtube.com/watch?v=3TuZkfUJ1_s

STEP 1 Select TSDConnections, Copy Connection

STEP 2 Select the Plate on the Bracing Connection on the Front Beam

STEP 3 Select the Intersection Point on the rear of the Sketch Frame
http://www.youtube.com/watch?v=3TuZkfUJ1_shttp://www.youtube.com/watch?v=3TuZkfUJ1_shttp://www.youtube.com/watch?v=3TuZkfUJ1_shttp://www.youtube.com/watch?v=3TuZkfUJ1_s


26/73

26 | P a g e

STEP 4 Select the Main Section of the rear Beam

STEP 5 Select any other beam


STEP 7 Select ThePerpendicular Mate

and Edit the Feature

STEP 8 Change to aCoincident Mate


27/73

27 | P a g e

STEP 9 Flip the matealignment

STEP 10 We will now insert the centre beams. Select TSDMembersmenu and Select Beams

STEP 11 Select the Third Beam Model type


28/73

28 | P a g e

STEP 12 Select the sketch line as shown


STEP 14 Repeat STEP 10 to STEP 13 for the next 2sketch lines as shown


29/73

29 | P a g e

STEP 15 Select TSDConnections, Copy Connection

STEP 16 On thefirst of the 3 newbeamconnections,select the face of

the connectioncleat


30/73

30 | P a g e

STEP 17

Select the

intersectionpoint for theconnection

STEP 18 Select themember thatthe newconnectionwill be

welded to

STEP 19 Select any other beam


STEP 21 Suppress and Unsuppress the new connection.


31/73

31 | P a g e

STEP 22 Rotate thenewconnection inBeam 9999-AABE002 toalign with thebeam

STEP 23 Theconnectionnow looks likethis

STEP 24 Openbeam

9999-AABE002


32/73

32 | P a g e

STEP 25 Edit the properties of the new fin plate and uncheck the exclude from bill of materials box

STEP 26

Suppress the

fasteners.

STEP 27 Repeat step 30 to step 40 to copy connections from the other 2 internal beams

STEP 28 At this stage we would recommend updating the drawing of the beam with the newconnection and the drawings of the connections before copying the beam.


33/73

33 | P a g e

STEP 29 Right mouse click on the beam assembly9999-AABE002 to open the drawing

STEP 30 Select TSD Utilities, Hide Excluded Componentsin Drawings.

If adding a view after using this function, you must run itagain.

STEP 31 Update the drawing, add dimensions and sections as required to locate the new fin platesand brace cleat.

STEP 32 Open the drawing of the beam by Right Mouse clicking on a face of the beam

STEP 33 Adjust the views and dimensions to fit on the page.

STEP 34 Open the Fin plate drawing and the Brace cleat drawing in the same way and update themas required.


34/73

34 | P a g e

LESSON 6 COPY MEMBER

PREREQUISITES

LESSON 5 Completed

VIDEO - http://www.youtube.com/watch?v=Kc6GfEfjKB8

STEP 1 To copy the rear beam you must delete all external references outside of the beamassembly. This will be on the first Member Sketch and some of the connection sketches at thebottom of the beam assembly. They will need to be redefined afterthe copy process is completed.

STEP 2 Select TSDMembers and Copy Member

STEP 3 Select theMainSection ofthe rearbeam

STEP 4 Select the front Sketch Frame Line Segment
http://www.youtube.com/watch?v=Kc6GfEfjKB8http://www.youtube.com/watch?v=Kc6GfEfjKB8http://www.youtube.com/watch?v=Kc6GfEfjKB8http://www.youtube.com/watch?v=Kc6GfEfjKB8


35/73

35 | P a g e


STEP 6 Redefine the sketch relations that were deleted to do the copy member.

STEP 7 Define the connection points in the new copied beam by isolating the new beam and the firstframe member

STEP 8 Exit Isolate.

STEP 9 The connections on the new beam need to be reversed to align with the fin plates on theintersecting beams.


36/73

36 | P a g e

STEP 10 Suppress the existingfin plate in the connection of

the new beam

STEP 11 Unsuppress the alternate fin plate

STEP 12 Repeat step 10to 11for the remaining 2 fin plate

connections on the newbeam.


37/73

37 | P a g e

LESSON 7 PUNCH HOLES

PREREQUISITES

LESSON 6 Completed

VIDEO - http://www.youtube.com/watch?v=aLlzDNGZdTc

STEP 1 Select TSDUtilities Punch Holes

STEP 2 Select the

back of the plate atthe lower left corner

STEP 3 Select the farface of the FrontBeam Web

STEP 4 Select Green Tick.

STEP 5 Do this also for the other end of the samebeam.

STEP 6 Do NOT attempt to punch holes in the beam on the far side as this is a duplicate beam
http://www.youtube.com/watch?v=aLlzDNGZdTchttp://www.youtube.com/watch?v=aLlzDNGZdTchttp://www.youtube.com/watch?v=aLlzDNGZdTchttp://www.youtube.com/watch?v=aLlzDNGZdTc


38/73

38 | P a g e

LESSON 8 INSERT AND DUPLICATE BRACING

PREREQUISITES

LESSON 7 Completed

VIDEO - http://www.youtube.com/watch?v=gV30-EISC3g

STEP 1 Isolate Beam9999-AABE001 and theframe sketch.

STEP 2 Expand theFeature tree down to

the first connection.Edit Member Sketch2

STEP 3 Make thesketch line Parallel tothe Bracing set outsketch line
http://www.youtube.com/watch?v=gV30-EISC3ghttp://www.youtube.com/watch?v=gV30-EISC3ghttp://www.youtube.com/watch?v=gV30-EISC3ghttp://www.youtube.com/watch?v=gV30-EISC3g


39/73

39 | P a g e

STEP 4 Exitthe sketch.

STEP 5 EditMemberSketch3

STEP 6 Make thesketch lineparallel tothe bracing

set outsketch

STEP 7 EditAssembly and exit Isolate. There is no need to do this on the opposite beam because its the same.

STEP 8 Repeat Step1 to Step 7for theotherBeams9999-AABE002and 9999-

AABE006


40/73

40 | P a g e

STEP 9 Select TSDMembers menu, select Bracing

STEP 10 Select the 1st

Model Picture of thebracing

STEP 11 Select thefront left bracingsketch segment



41/73

41 | P a g e

STEP 13 Select the Red X or press Escape to close the Member window after the brace has beeninserted.

STEP 14 Create a Parallel mate between the Front plane of thebrace to the front plane of the assembly to fully define the brace.

STEP 15 Isolate the brace, column 1 and beam 1.


42/73

42 | P a g e

STEP 16 Select the Left Cut Sketch in the brace and edit sketch

STEP 17 Delete the 400dimension defining the end cutof the brace


43/73

43 | P a g e

STEP 17 Make the top right sketch segment collinear to the set out line as shown

STEP 18 Exit the sketch and rebuild. The end cut andfasteners will be in the correct position.

STEP 19 Selectthe Right CutSketch in thebrace and editsketch


44/73

44 | P a g e

STEP 20 Delete the dimensiondefining the end cut of the

brace

STEP 21 Make thebottom left sketchsegment collinearto the set out lineas shown

STEP 22 Exit the sketch and rebuild. The end cut andfasteners will be in the correct position.

STEP 23 Select TSDMembers menu, select Bracing


45/73

45 | P a g e

STEP 24 Select the 2 nd Model Picture of the bracing

STEP 25 Select thefront rightbracing sketchsegment



46/73

46 | P a g e

STEP 27 Select the Red X or press Escape to close the Member window after the brace has beeninserted.

STEP 28 Create a Parallel mate between the Front plane ofthe brace to the front plane of the assembly to fully definethe brace.

STEP 29 Isolate thebrace,column 2and beam 1.


47/73

47 | P a g e

STEP 30 Repeat step 16 to 23 to define the ends of brace 2.

NOTE! If abrace is onthe wrongside of theset outline, fliptheparallelmate


48/73

48 | P a g e

STEP 31 Repeat Steps 9to 31 to insert the 2bracing members onthe far left side.

STEP 32 Suppress thecope cut at the bottomof brace 3.

STEP 33 Suppress thecope cut at the bottomof brace 4.


49/73

49 | P a g e

STEP 34 Yourmodel will

look like this

STEP 35 FollowingLESSON 2, Step13 to 16Duplicate thefront bracingto the far side.

STEP 36 Thenduplicate thebracing fromthe far left tothe right hand

side

NOTE! SomeBracing willrequire aparallel mateto define itfully in theassembly.


50/73

50 | P a g e

LESSON 9 INSERT STAIRS

PREREQUISITES

LESSON 8 Completed

VIDEO - http://www.youtube.com/watch?v=wda25oE3aNI

STEP 1 Select TSDMembers menu, select STAIRS

STEP 2 Select the Model Picture of the stair

STEP 3 Select the horizontalsketch segment in the stairlayout sketch
http://www.youtube.com/watch?v=wda25oE3aNIhttp://www.youtube.com/watch?v=wda25oE3aNIhttp://www.youtube.com/watch?v=wda25oE3aNIhttp://www.youtube.com/watch?v=wda25oE3aNI


51/73

51 | P a g e

STEP 4 Select the diagonal sketchsegment in the stair layout sketch

Step 5 Select the green tick

Step 6 Select the Red X or pressEscape to close the Member

window after the stair has beeninserted.

Step 7 Isolate the stair and theframe assembly.

STEP 8 In the drivingsketch part 9999-AAST001D01, Edit theTread and Grating

Sketch


52/73

52 | P a g e

STEP 9 Select the top leglength dimension and make itdriven

STEP 10 Select the end point ofthe top sketch line and make itcoincident to the end point ofthe stair set out sketch

STEP 11 Exit the sketch andIsolation, then rebuild withCTRL Q,

STEP 12 Copy the fin plateconnections from the stair tothe beam. Refer to LESSON 5.


53/73

53 | P a g e

LESSON 10 INSERT HANDRAILS

PREREQUISITES

LESSON 9 Completed

VIDEO - http://www.youtube.com/watch?v=qnOwT6-LcN4

STEP 1 Isolate the Frameassembly

STEP 2 Select TSDMembers menu, select HANDRAILS

STEP 3 Select the 1 ST Model Picture of the Top Mountedhandrail
http://www.youtube.com/watch?v=qnOwT6-LcN4http://www.youtube.com/watch?v=qnOwT6-LcN4http://www.youtube.com/watch?v=qnOwT6-LcN4http://www.youtube.com/watch?v=qnOwT6-LcN4


54/73

54 | P a g e

STEP 4 Select the sketch optio

STEP 5 Select the top sketch

name Level 1 Beam Sketch

STEP 6 Select the green tick

STEP 7 Select theRed X or pressEscape to closethe Memberwindow after thestair has beeninserted.


55/73

55 | P a g e

STEP 8 Show thestair assemblyalso.

STEP 9 In thefeature tree,expand thehandrail abovethe stair (9999-

AAHA002) andedit MemberSketch

STEP 10 Delete theEqual Lengthrelation


56/73

56 | P a g e

STEP 11 Dimensionthe endpoint to thesketch pointfor the stairfin plateconnection.

STEP 12 Exit the sketch and rebuild.

STEP 13 Select TSDMembers menu, select HANDRAILS

STEP 14 Select the 2 nd Model Picture of the Top Mounted handrail


57/73

57 | P a g e

STEP 15 Select thehorizontal sketch segmentin the left hand stringerlayout sketch

STEP 16 Select the lefthand diagonal sketchsegment in stringer layoutsketch



58/73

58 | P a g e

STEP 18 Select the 3 rd ModelPicture of the Top Mounted

handrail

STEP 19 Select the horizontalsketch segment in the righthand stringer layout sketch

STEP 20 Select the diagonalsketch segment in the right

hand stringer layout sketch


59/73

59 | P a g e


STEP 22 Select theRed X or pressEscape to close theMember windowafter the handrails

have been inserted.

STEP 23 Adjust theMember sketch onHandrail 2 (9999-

AAHA002) to get thecorrect gap to thestair handrail

STEP 24 Edit theHandrail SetoutSketch for handrail 2

STEP 25 Adjust thekickplate offsetdimension to bringto 2 kickplatestogether


60/73

60 | P a g e

STEP 26 Exit the sketch and rebuild.

STEP 27 Following LESSON 6, punch holes from the handrail base plates through the top flanges ofthe beams and stair stringers

STEP 28 Your model will look like this

And with sketches hidden-


61/73

61 | P a g e

LESSON 11 INSERT CRUSHER

PREREQUISITES

LESSON 10 Completed

VIDEO - http://www.youtube.com/watch?v=acAC0YLysQk

STEP 1 Select TSDMembers menu, Select Vendor Equipment

STEP 2 Select CRUSHER for ModelType and TSD for Model Supplier,

Select the ModelType, Select Sketch Point

STEP 3 Select Sketch Frame Sketch Point

http://www.youtube.com/watch?v=acAC0YLysQkhttp://www.youtube.com/watch?v=acAC0YLysQkhttp://www.youtube.com/watch?v=acAC0YLysQkhttp://www.youtube.com/watch?v=acAC0YLysQk


62/73

62 | P a g e

LESSON 12 COPY PROJECT

PREREQUISITES

LESSON 11 Completed

VIDEO - http://www.youtube.com/watch?v=0Yu9-lj2Tvo

STEP 1 Close the Assembly and anythingelse, but leave SolidWorks open.

STEP 2 Select TSDProjects, Copy Project

STEP 3 Select Get SQL Servers

STEP 4 Select SQL Server Instance[(Local)/SQLExpress, is the default].Select Project to Copy(9999,TUTORIAL PROJECT)

Select Get Files

Note: The picture is an example.
http://www.youtube.com/watch?v=0Yu9-lj2Tvohttp://www.youtube.com/watch?v=0Yu9-lj2Tvohttp://www.youtube.com/watch?v=0Yu9-lj2Tvohttp://www.youtube.com/watch?v=0Yu9-lj2Tvo


63/73

63 | P a g e

STEP 5 Select SQL Server Instance [(Local)/SQLExpress, is the default].

Enter Data as per the image to the right.

Select Update List

Note: The picture to the right is an example only.

STEP 6 Select Create

STEP 7 Select Exit


64/73

64 | P a g e

STEP 8 Select TSDProjects, Project Login,

STEP 9 Select Project 9997, COPY TUTORIAL PROJECT 1, Select AA,TUTORIAL PROJECT for WBS Code

Select LOG-IN

STEP 10 Saveand Close


65/73

65 | P a g e

LESSON 13 LOCK MEMBERS

PREREQUISITES

LESSON 12 Completed

VIDEO - http://www.youtube.com/watch?v=51bgSPTX74A

STEP 1 Select TSDProjects TSD Login

STEP 2 Select Project 9999

STEP 3 Select WBS Code AA, TUTORIAL PROJECT

STEP 4 Select LOG-IN
http://www.youtube.com/watch?v=51bgSPTX74Ahttp://www.youtube.com/watch?v=51bgSPTX74Ahttp://www.youtube.com/watch?v=51bgSPTX74Ahttp://www.youtube.com/watch?v=51bgSPTX74A


66/73

66 | P a g e

STEP 5 Select TSDMembers, Lock Member

STEP 6 Select the Main Section of theColumn 001

STEP 7 Select the Bolted Connection for capturing the Bolts with theMember,

I.e. BP01 is the connection that has the Bolts for the baseplateconnection.

STEP 8 Hit Green Tick

STEP 9 After Lock has occurred, Hit Ctr Q and Ctr S

STEP 10 Repeat STEPS 5 - 9 until all Members are completed


67/73

67 | P a g e

The completed model should look like this, after all Members are locked.


68/73

68 | P a g e

LESSON 14 CREATING GENERAL ARANGEMENTS

PREREQUISITES

LESSON 13 Completed

VIDEO - http://www.youtube.com/watch?v=XXsEUDIlBk0

STEP 1 Select File Menu, New

Any A3 Drawing Sheet is good.

STEP 2 Select Next

STEP 3 Insert a side Elevationof 9999-AA, Hit the Green Tick
http://www.youtube.com/watch?v=XXsEUDIlBk0http://www.youtube.com/watch?v=XXsEUDIlBk0http://www.youtube.com/watch?v=XXsEUDIlBk0http://www.youtube.com/watch?v=XXsEUDIlBk0


69/73

69 | P a g e

STEP 4 Select View Layout Tab in theCommand Manager, then Project View

Place 3 More Views, TOP, LEFT, ISOMETRIC

STEP 5 Change Scale to suit ie A3 (1:75)

Right Mouse Click Drawing, Select Properties

STEP 6 Select the Annotation TAB on the CommandManager, Note

STEP 7 Select ColumnC001 Edge and Pick tothe left of the Column,then select Link toProperty.


70/73

70 | P a g e

STEP 8 Select Component towhich., then Select AssemblyDoc

as field

STEP 9 Click of to the side to setthe note

STEP 10 Copy the annotationcreated in 7 from 1 Section toanother and notice the updatedsection.

If the note does not displayanything it means the memberhas not been locked.

STEP 11 Save the General Arrangement in the WBS 9999-AA directory.

C:\The Steel Detailer \ \ Project\9999\9999-AA\

- Your Country.
http://c/The%20Steel%20Detailer/http://c/The%20Steel%20Detailer/http://c/The%20Steel%20Detailer/


71/73

71 | P a g e

LESSON 15 UPDATING REVISIONS AND CREATE PDFs

PREREQUISITES

LESSON 14 Completed

VIDEO - http://www.youtube.com/watch?v=T11ZfQHJpX8

STEP 1 Select TSDDrawings, Document Manager

STEP 2 Select Document Status Filter, Locked

STEP 3 Select the Select All Tick

STEP 4 Select Modify Revisions

STEP 5 Select Update Current Revision Radial Button, Enter in Data,Select Update,
http://www.youtube.com/watch?v=T11ZfQHJpX8http://www.youtube.com/watch?v=T11ZfQHJpX8http://www.youtube.com/watch?v=T11ZfQHJpX8http://www.youtube.com/watch?v=T11ZfQHJpX8


72/73

72 | P a g e

STEP 6 Select OK

STEP 7 Select Create PDFs

STEP 8 Select UPDATE

STEP 9 After PDFs ar e Complete,Check the PDF folder found

C:\The Steel Detailer\


73/73

LESSON 16 CREATE REPORTS

PREREQUISITES

LESSON 15 Completed

VIDEO - http://www.youtube.com/watch?v=A-paxBEE1_Q

STEP 1 Select TSDDrawings, Reports

STEP 2 Select CUT LIST

A Material Cut List is created

STEP 3 Select Total Radial Button, then BOLT LIST

A Total Bolt List is created

STEP 4 Select By Member, Then BOLT LIST

A By Member Bolt List is created

STEP 5 VENDOR LIST

A Vendor List is created

STEP 6 Select FLAT BAR LIST

A Flat Bar List is created

STEP 7 Select PLATE LIST

A Plate List is created

Note: All reports are place into respective folder in the Project Folder

C:\The Steel Detailer \ TSD Australian Trial Tutorials\Project\9999

- Your Country.
http://www.youtube.com/watch?v=A-paxBEE1_Qhttp://www.youtube.com/watch?v=A-paxBEE1_Qhttp://www.youtube.com/watch?v=A-paxBEE1_Qhttp://c/The%20Steel%20Detailer/http://c/The%20Steel%20Detailer/http://c/The%20Steel%20Detailer/http://www.youtube.com/watch?v=A-paxBEE1_Q

Documents

Tutorial 1 - How to Steel Detail a Crushing Station