1
ORBITA CAR ELECTRIC TURNTABLE SPECIFICATIONS Platform 360° rotating platform Rotation Pre-set rotation by way of electric switches placed around the edge Platform diametre Ø 4000mm – 5000mm Pit depth 300 mm. Capacity 2500 Kgs Mass 1300 Kgs Framework Powder coated Platform Hot galvanised anti-skid tread plate Platform supports Supporting castors placed around the perimetre Rotation Electric motor Motor 0.75 Kw – can be placed into the pit Power supply Monophase 220 V – 50 Hz. Controls Low tension (24V), with key Safeties: “Dead man” buttons Emergency stop Push button board with extractable key Warranty: Two years on parts orbita ORBITA - Car Turntable This is the perfect solution for manoeuvring vehicles in narrow spaces, thus making it easy the entrance and exit to any place. It is an easy to install in-ground electric powered turntable that can be laid on garage floor or on an existing driveway. The turntable is ultra thin (just 30mm thick) and features an either epoxy powder coated or hot galvanised anti-skid tread plate. Tiles or synthetic grass applications to suit the driveway are an option. A pit ring is provided with for contractor use. The turntable is multi-directional and completely programmable. It can turn 360 degrees and can be stopped in any position. Variable speed is available as an option. This is the ultimate solution for driveways and garages that are limited on space. It increases safety as it eliminates dangerous reversing in tight spaces. The system requires limited maintenance. SAFETIES “Dead man” control: the platform turn only if the key is inserted into the slot and the button is pressed. The electric panel can be preset for connecting landing doors for further safety. OPTIONS Capacity 3000 Kgs Platform suitable for tiles to match the driveway Pit edge frame Hot galvanised pit edge frame Safeties Automatic doors Fire resisting doors Anti-intrusion photocells DOCUMENTS TO BE PROVIDED WITH THE LIFT EC conformity declaration Users manual Hydraulic and wiring diagram

Turntable Brochure

Embed Size (px)

DESCRIPTION

This is a Specification list of a Electric Car Turntable

Citation preview

  • Via Stazione 119C 30035 Ball di Mirano (VE) T. +39 041 4196340 F. +39 041 [email protected] www.ecospace.it

    ORBITA CAR ELECTRIC TURNTABLE SPECIFICATIONS

    Platform 360 rotating platform

    Rotation Pre-set rotation by way of electric switches placed around the edgePlatform diametre 4000mm 5000mmPit depth 300 mm. Capacity 2500 KgsMass 1300 KgsFramework Powder coatedPlatform Hot galvanised anti-skid tread plate

    Platform supports Supporting castors placed aroundthe perimetreRotation Electric motor Motor 0.75 Kw can be placed into the pitPower supply Monophase 220 V 50 Hz.Controls Low tension (24V), with key

    Safeties:Dead man buttonsEmergency stopPush button board with extractable key

    Warranty: Two years on parts

    orbita

    ORBITA - Car TurntableThis is the perfect solution for manoeuvring vehicles in narrow spaces, thus making it easy the entrance and exit to any place. It is an easy to install in-ground electric powered turntable that can be laid on garage floor or on an existing driveway. The turntable is ultra thin (just 30mm thick) and features an either epoxy powder coated or hot galvanised anti-skid tread plate. Tiles or synthetic grass applications to suit the driveway are an option. A pit ring is provided with for contractor use.The turntable is multi-directional and completely programmable. It can turn 360 degrees and can be stopped in any position. Variable speed is available as an option. This is the ultimate solution for driveways and garages that are limited on space. It increases safety as it eliminates dangerous reversing in tight spaces. The system requires limited maintenance. SAFETIESDead man control: the platform turn only if the key is inserted into the slot and the button is pressed. The electric panel can be preset for connecting landing doors for further safety.

    OPTIONS

    Capacity3000 KgsPlatform suitable for tiles to matchthe driveway

    Pit edge frame Hot galvanised pit edge frame

    SafetiesAutomatic doorsFire resisting doorsAnti-intrusion photocells

    DOCUMENTS TO BE PROVIDED WITH THE LIFT EC conformity declaration Users manual Hydraulic and wiring diagram