Upload
danghuong
View
215
Download
0
Embed Size (px)
Citation preview
Striped Stars www.phillipsfiberart.com
© 2015 Cheryl Phillips This pattern is NOT for resalePage 1
Striped Stars
Fabric Number of Strips Strip Width
A four 1 ¾" x widthtwo 2 ½" x width
B four 2" x width
C two 7 ¾" x widthone* 3 ¼" x width
D two 7 ½" x width binding four 2 ½" x width
Finished runner: 48" x 16"
Tool PreparationApply non-slip adhesive rings to both the back and front sides
of the tool. You need to have these on both sides as you'll be cutting pieces with the tool flipped over.
Fabric Exact Amount Suggested Yardage
A 18" ⅝ ydB 12" ½ ydC 20" ¾ yd
D/Binding 24" ⅞ ydBacking/Batting 52 x 20"
partial 1 line
partial 2 line
*Cut into 3 ¼" squares then in half diagonally for corners. See page 3 for instructions on adding corners.
Striped Stars www.phillipsfiberart.com
© 2015 Cheryl Phillips This pattern is NOT for resalePage 2
wordsUP
wordsUP Down
Down
wordsUP
wordsUP Down
Down
wordsUP
wordsUP D
own
Down
Cut 10
Cut 10
Cut 10
Cut 10
Cut 10
Cut 10
Yes, the tool extends beyond the strip.
Helpful labels for the strip sets are found on page 5.
Place the tool on the strip set so bottom of the tool is aligned with the edge of the strip set.
The words on the tool are UP.Cut 10 of the full tool shape.
Align the Partial 1 slots of the tool to the edge of the strip.
The words on the tool are UP.Cut 10 of the partial 1 tool shape.
Align the Partial 2 slots of the tool to the edge of the strip.
The words on the tool are UP.Cut 10 of the partial 2 tool shape.
Place the tool on the strip set so bottom of the tool is aligned with the edge of the strip set.
The words on the tool are DOWN.Cut 10 of the reverse full tool shape.
Align the Partial 1 slots of the tool to the edge of the strip.
The words on the tool are DOWN.Cut 10 of the reverse partial 1 tool shape.
Align the Partial 2 slots of the tool to the edge of the strip.
The words on the tool are DOWN.Cut 10 of the reverse partial 2 tool shape.
1 ¾" A
7 ¾" C
7 ½" D
2" B
2 ½" A2" B
1 ¾" A
Set 1 (make two)
Strip 2
Strip 3
REVERSEREVERSE
REVERSE
AlwaysSew with
Exact¼" Seams
Yes, the tool extends beyond the strip.
Striped Stars www.phillipsfiberart.com
© 2015 Cheryl Phillips This pattern is NOT for resalePage 3
Making QuadsArrange and sew your squedge
pieces to make each quad.• reverse partial 2• reverse partial 1• reverse full• full• partial 1• partial 2
Make 8
Making Half Quads (right) Arrange and sew your squedge
pieces to make triangles.• reverse partial 2• reverse partial 1• reverse full
Make 2
Making Half Quads (left)Arrange and sew your squedge
pieces to make triangles.• full• partial 1• partial 2
Make 2
Adding Corner Squares
Add one corner tiangle to each quad and triangle.
Trim excess corner fabric using the Squedge Corner tool.
Using your Squedge Corner tool trim the
corner of each quad and triangle. The Squedge Corner Tool is available one our website and includes complete instructions
to add corners to each of your squedge projects. You may also download a paper copy of our corner tool found on the FAQ page for the Squedge tools.
AlwaysSew with
Exact¼" Seams
Striped Stars www.phillipsfiberart.com
© 2015 Cheryl Phillips This pattern is NOT for resalePage 4
Assemble together into the runner.Add backing, quilt as desired and bind.
Enjoy!
Make 2 triangle sets.
Make 2 blocks.
Set #1
1 ¾" A 2" B 2 ½" A 2" B 1 ¾" A
Align Edge of toolwords facing UP
Cut 10 full squedges
Set #2
7 ¾" CAlign Partial 1 line
words facing UPCut 10 partial 1 squedges
Set #3
7 ½" DAlign Partial 2 line
words facing UPCut 10 partial 2 squedges
Set #1
1 ¾" A 2" B 2 ½" A 2" B 1 ¾" A
Align Edge of toolwords facing DOWN
Cut 10 reverse full squedges
Set #2
7 ¾" CAlign Partial 1 line
words facing DOWNCut 10 reverse partial 1 squedges
Set #3
7 ½" DAlign Partial 2 line
words facing DOWNCut 10 reverse partial 2 squedges