TTT User Guide

Telstra Corporation Limited (ACN 051 775 556) © 2010 All rights reserved. No part of this document may be released, distributed, reproduced,

copied, stored, or transmitted in any form or by any means, without the prior written permission of Telstra Corporation Limited

Telstra IP Telephony

Telstra Telephony Toolbar

User Guide

2222

Table of ContentsTable of ContentsTable of ContentsTable of Contents

About This Guide ........................................................................................................................................................................................5

Open TTT ..........................................................................................................................................................................5

First Time Login ................................................................................................................................................................6

Subsequent Use After First Login.............................................................................................................................................................8

Services Toolbar ...............................................................................................................................................................8

Call Control Toolbar .......................................................................................................................................................11

Call Control................................................................................................................................................................................................12

Making Calls ...................................................................................................................................................................12

Basic Dialling using the Call Control toolbar.................................................................................................................................. 12

Dial from E-mail in Microsoft Outlook 2000/2002/2003 ................................................................................................................ 13

Dial from Contact List......................................................................................................................................................................... 14

Dial from vCard.................................................................................................................................................................................... 14

Dial from Personal Directory............................................................................................................................................................. 15

Dial from Group Directory ................................................................................................................................................................. 16

Dial from Call History ......................................................................................................................................................................... 16

Dial from Speed Dial Directory ......................................................................................................................................................... 17

Dial from Search.................................................................................................................................................................................. 17

Receive Call.....................................................................................................................................................................19

Answer Call........................................................................................................................................................................................... 19

Call Notification................................................................................................................................................................................... 19

Transfer................................................................................................................................................................................................. 20

Open URL.............................................................................................................................................................................................. 20

Save vCard............................................................................................................................................................................................ 20

Voice Mail .......................................................................................................................................................................21

Transfer to Voice Mail ........................................................................................................................................................................ 21

End a Call ........................................................................................................................................................................21

During a Call ...................................................................................................................................................................22

Hold Call ............................................................................................................................................................................................... 22

3333

Initiate N-Way Conference ................................................................................................................................................................ 22

Call History .....................................................................................................................................................................23

View Call Logs ...................................................................................................................................................................................... 23

Options Dialog ..........................................................................................................................................................................................24

General............................................................................................................................................................................24

Account...........................................................................................................................................................................25

Connection .....................................................................................................................................................................26

Dialling Rules..................................................................................................................................................................27

Microsoft Outlook Integration ......................................................................................................................................28

Contacts................................................................................................................................................................................................ 29

LDAP Integration............................................................................................................................................................29

LDAP Integration............................................................................................................................................................30

Directory............................................................................................................................................................................................... 30

Directory............................................................................................................................................................................................... 31

Web Screen Pop..............................................................................................................................................................33

About ………………………………………………………………………………………………………………………………………………………………….34

Services Dialog..........................................................................................................................................................................................35

Incoming Calls ................................................................................................................................................................35

Anonymous Call Rejection ................................................................................................................................................................ 35

Call Forwarding Always ..................................................................................................................................................................... 36

Call Forwarding No Answer............................................................................................................................................................... 37

Call Forwarding Busy ......................................................................................................................................................................... 38

Do Not Disturb ..................................................................................................................................................................................... 39

External Calling Line ID Delivery ...................................................................................................................................................... 40

Internal Calling Line ID Delivery ....................................................................................................................................................... 40

Simultaneous Ring.............................................................................................................................................................................. 41

CommPilot Express ............................................................................................................................................................................. 43

Outgoing Calls ................................................................................................................................................................48

Automatic Callback............................................................................................................................................................................. 48

Calling Line ID Delivery Blocking ...................................................................................................................................................... 49

Call Control .....................................................................................................................................................................50

Call Waiting .......................................................................................................................................................................................... 50

4444

Remote Office ...................................................................................................................................................................................... 50

Remote Office ...................................................................................................................................................................................... 51

Messaging.......................................................................................................................................................................52

Voice Messaging.................................................................................................................................................................................. 52

Troubleshooting.......................................................................................................................................................................................54

Using TTT with Microsoft Windows Service Pack 2 (SP2) ............................................................................................54

TTT Not Visible in Microsoft Outlook ............................................................................................................................55

Enable TTT within Microsoft Outlook 2000/2002/2003................................................................................................55

Enable TTT within Microsoft Outlook 2007..................................................................................................................56

I Have Not Been Licensed to Use TTT ...........................................................................................................................58

TTT Not Visible in Microsoft Internet Explorer.............................................................................................................58

Glossary ………………………………………………………………………………………………………………………………………………………………………….59

5555

About This GuideAbout This GuideAbout This GuideAbout This Guide

Telstra Telephony Toolbar (herein referred as TTT) is a lightweight desktop communications management product

for everyday users of Microsoft Outlook, Microsoft Internet Explorer and Mozilla Firefox with the Telstra IP

Telephony (TIPT) platform.

With this product you can manage your incoming and outgoing messages, maintain up-to-date connection

information, and configure controls on your calls, add-on services and voice mail.

This guide provides step-by-step procedures and reference information for TTT.

Open Open Open Open TTTTTTTTTTTT

TTT is an add-in to Microsoft Internet Explorer, Microsoft Outlook and Mozilla Firefox and provides new toolbars to

access TIPT Service and Call Management features within your web browsers and mail client.

When you open Microsoft Internet Explorer or Microsoft Outlook with TTT you see the following toolbars. Most

buttons are disabled until you log in.

The Microsoft Internet Explorer edition of the Toolbar looks like this:

For Microsoft Outlook, the Toolbar looks like this:

The Mozilla Firefox Toolbar looks like this:

6666

First Time LoginFirst Time LoginFirst Time LoginFirst Time Login

Logging into TTT identifies you to the servers that manage your phone services. This is so you can receive, initiate,

and control calls directly from your computer.

When you log in for the first time, you need to configure your connection settings as described in the following

steps. Once these settings are configured, you do not need to provide them again.

You can log in directly from the toolbar by clicking Login.

• Click LoginLoginLoginLogin on the toolbar.

TTT opens the Options dialog automatically on the first-time login of Toolbar.

• Click AccountAccountAccountAccount to open the Account page in the tree view to the left of the Options dialog.

• To configure your account settings, enter, in the provided fields, the user name and password provided by

your Customer Group Administrator for your TTT account.

• Check the Save Username and Save Password options if you want to avoid being prompted for this

information next time you log in. Your password is encrypted for greater security.

• Click ApplyApplyApplyApply.

7777

• Click ConnectionConnectionConnectionConnection to open the Connection Page of TTT Options.

The server URL and port number are preconfigured by default to enable the connectivity to the Telstra TIPT

servers. Consult your Customer Administrator for any variation to these values.

• Click ApplyApplyApplyApply.

To configure your general settings, click GeneralGeneralGeneralGeneral. . . .

• Check the Auto login when connected to network to have TTT connect automatically to the TIPT server when

a network connection is available.

• Click OKOKOKOK.

8888

Subsequent UseSubsequent UseSubsequent UseSubsequent Use After First LoginAfter First LoginAfter First LoginAfter First Login

Once you have configured TTT with the settings it needs to connect to TIPT, you can log in without having to

provide that information again.

When you have successfully logged in to TTT, most of the buttons on your toolbar are enabled.

Services ToolbarServices ToolbarServices ToolbarServices Toolbar

The services toolbar controls the call behaviour of TTT and the attached telephony service it is associated with.

These functions are shortcuts to the most frequently used functions in CommPilot.

Login Login Login Login Logs in and out of TTT. The colour and appearance of this icon

indicates your login status.

A grey icon indicates that you are not logged in. A green icon shows that you

are currently logged in. A disabled button shows that TTT is attempting to

log in. A red button indicates that your last login attempt failed.

OptionsOptionsOptionsOptions:::: You can configure your TIPT account, connection settings, and

dialling rules through this dialog. This icon is highlighted when open.

Services:Services:Services:Services: You can configure the Call Management services provided by TTT.

This icon is highlighted when in use.

CommPilot LoginCommPilot LoginCommPilot LoginCommPilot Login button uses the web browser to navigate to the CommPilot

login page. This button is only available in the Microsoft Internet Explorer and

Mozilla Firefox toolbars.

Remote Office:Remote Office:Remote Office:Remote Office: When activated, this service allows you to use an alternate

phone, such as a mobile, home, or hotel phone, as your main business phone.

When this service is enabled, the icon is highlighted.

If Remote Office is not yet configured when you use this icon, TTT opens the

Services dialog to the Remote Office page so you can configure the service.

9999

Simultaneous RingSimultaneous RingSimultaneous RingSimultaneous Ring:::: This allows you to set up a list of up to ten additional

phone numbers that ring each time you receive a call. While the service is

enabled, the icon remains highlighted.

If Simultaneous Ring is not yet configured when you use this icon to activate

the service, TTT opens the Services dialog to the Simultaneous Ringing page for

you to configure the service.

Current CommPilot Profile Current CommPilot Profile Current CommPilot Profile Current CommPilot Profile sets the current CommPilot Express profile, which

determines the way the system handles incoming calls. You can configure

the settings for your CommPilot Express profiles in the Services dialog.

Call Forwarding Always ServiceCall Forwarding Always ServiceCall Forwarding Always ServiceCall Forwarding Always Service automatically forwards all incoming calls to a

specified phone number. When this service is enabled, this icon remains

highlighted.

If Call Forwarding Always is not yet configured when you use this icon to

activate the service, TTT opens the Services dialog to the Call Forwarding

Always page for you to configure the service.

Call Forwarding No Answer Service: Call Forwarding No Answer Service: Call Forwarding No Answer Service: Call Forwarding No Answer Service: automatically forwards all incoming

calls to a specified phone number when you do not answer within a specified

number of rings. While the service is enabled, the icon remains highlighted.

If Call Forwarding No Answer is not yet configured when you use this icon to

activate the service, TTT opens the Services dialog to the Call Forwarding No

Answer page for you to configure the service.

Call Forwarding Busy ServiceCall Forwarding Busy ServiceCall Forwarding Busy ServiceCall Forwarding Busy Service forwards all incoming calls to a specified phone

number when you are busy on other calls. While the service is enabled, this

icon remains highlighted.

If Call Forwarding Busy is not yet configured when you use this icon to

activate the service, TTT opens the Services dialog to the Call Forwarding Busy

page for you to configure the service.

Do Do Do Do Not Disturb Not Disturb Not Disturb Not Disturb Service automatically forwards all incoming calls to your

Voice Mail service, or plays callers a busy tone if you do not have a Voice Mail

service configured. While the service is enabled, this icon remains highlighted.

Speed Dial DirectorySpeed Dial DirectorySpeed Dial DirectorySpeed Dial Directory allows you to dial phone numbers saved in your speed

dial list by clicking on them with your mouse.

Call History Call History Call History Call History opens the list of your most recent received calls, missed calls, and

dialled calls.

10101010

Personal Directory Personal Directory Personal Directory Personal Directory allows you to dial phone numbers saved in your personal

list by clicking on them.

Group Directory Group Directory Group Directory Group Directory permits you to list the phone numbers of other members of

your telephony group. Once listed, you can dial the numbers in the listing by

clicking on them.

Search Search Search Search hunts in the group, personal, Microsoft Outlook, and Lightweight

Directory Access Protocol (LDAP, if set up) directories for the criteria you enter.

NOTENOTENOTENOTE: Please check with your Customer Group Administrator on the

directories your TTT is configured to search.

Telstra sitesTelstra sitesTelstra sitesTelstra sites provides a drop-down list containing URL links to other Telstra

services. Select an item from the list to navigate to that page in your web

browser. This button is not available in Microsoft Outlook.

11111111

Call Control ToolbarCall Control ToolbarCall Control ToolbarCall Control Toolbar

The Call Control Toolbar allows you to make and receive calls by interacting with and controlling your TIPT phone

through the client application. This allows the dialling and receiving of numbers, putting calls on hold, the initiating

of call transfers and call conferencing through the desktop client. Calls are accepted through the TIPT telephone

attached to the logged in TTT Account.

Dial NumberDial NumberDial NumberDial Number dials a specified number.

Answer Answer Answer Answer call answers an incoming call. Answer call can also be used to

Unhold a call.

Hold Hold Hold Hold puts the current call selected in the Call Lines on hold.

Blind Transfer Blind Transfer Blind Transfer Blind Transfer transfers the current call to another phone number.

Conference Call Conference Call Conference Call Conference Call starts a conference call that can include 3 to 32 callers. This

button only becomes enabled when you are connected to two other parties

at the same time.

EndEndEndEnd Call Call Call Call ends the current call. End Call can also be used to drop a held call.

Call LinesCall LinesCall LinesCall Lines is a list of phone numbers you are currently connected to, and their

call Status. Use this list to select which line you are managing with TTT.

Dial Contact Dial Contact Dial Contact Dial Contact dials the business, home, or mobile number of a selected contact

within Microsoft Outlook. This button is only available on the Microsoft

Outlook Toolbar.

12121212

Call ControlCall ControlCall ControlCall Control

Making CallsMaking CallsMaking CallsMaking Calls

Basic Dialling using the CaBasic Dialling using the CaBasic Dialling using the CaBasic Dialling using the Call Control toolbarll Control toolbarll Control toolbarll Control toolbar

To dial a new number not listed in a directory:

• Type the number in the Dial Number box.

• To place the call, press ENTERENTERENTERENTER.

• To end the call, click EndEndEndEnd.

To redial a previously dialled number:

• Select a number by clicking on the arrow at the right-hand side of the Dial Number box.

• A list of up to 10 previously dialled numbers is displayed.

• Click on a number in the Dial Number list.


To dial from a web page:

• Select the phone number displayed on a web page.

• Highlight the number with your mouse.

• Right-click the highlighted phone number and select DialDialDialDial from the pop-up window.

13131313

Dial from Dial from Dial from Dial from EEEE----mailmailmailmail in in in in Microsoft OutlookMicrosoft OutlookMicrosoft OutlookMicrosoft Outlook 2000/2002/2003 2000/2002/2003 2000/2002/2003 2000/2002/2003

Make sure that the e-mail you wish to dial from is in HTML format. To dial a contact from a Microsoft Outlook e-

mail, follow these steps:

• Open the e-mail that contains the phone number you wish to dial. Make sure it is either an open message

or in the preview format.

• Use your mouse to highlight the number you wish to dial.

• Right-click the highlighted number. A drop-down list appears. Click on DialDialDialDial. The phone call is now placed.

NOTENOTENOTENOTE: Dial from E-mail is not available in Microsoft Outlook 2007.

14141414

Dial from Contact ListDial from Contact ListDial from Contact ListDial from Contact List

With TTT you can dial the home, business, or mobile number of any contact directly within Microsoft Outlook.

• Click Contacts in the folder list.

• Select the contact you wish to call from the contact list.

• Click the arrow at the right-hand side of the Dial Contact drop-down list, on the TTT toolbar within Microsoft

Outlook.

• Select the type of number to call.

Dial from vCardDial from vCardDial from vCardDial from vCard

To dial from a vCard in Microsoft Outlook 2000/2002/2003:


• Double-click the contact you want to call. Microsoft Outlook opens the contact’s vCard.

• Click the arrow at the right-hand side of the Dial Contact drop-down list, on the TTT toolbar within Microsoft

Outlook.


15151515

To dial from a vCard in Microsoft Outlook 2007:


• Double-click the contact you want to call. Microsoft Outlook opens the contact’s vCard.

• Click the Telephony ToolbarTelephony ToolbarTelephony ToolbarTelephony Toolbar tab.


NOTENOTENOTENOTE: If there is no Home, Business or Mobile number specified for a contact, but you click on the corresponding

Home, Business, or Mobile button that has no number associated with it, you will receive an error. A

message appears stating “No number is specified for this contact”.

Dial from Personal DirectoryDial from Personal DirectoryDial from Personal DirectoryDial from Personal Directory

You can directly dial any number stored in your TIPT personal directory as it is integrated with the contacts in TTT.

• To open the personal directory, click Personal DirectoryPersonal DirectoryPersonal DirectoryPersonal Directory on the toolbar.

• This page can be printed using the host application.

Users with Microsoft Windows XP Service Pack 2 installed may encounter a warning when opening

the Personal Directory. For more information, see the section on Troubleshooting.

• To sort the Personal Directory, click on a column header. The table is sorted, in descending order, according

to the information in the column you selected.

• To change the sort order between descending and ascending, click on the same column header again.

• To dial a number from the Personal Directory, click on the desired phone number. TTT places the call.

16161616

Dial from Group DirectoryDial from Group DirectoryDial from Group DirectoryDial from Group Directory

You can directly dial any number stored in your group directory that integrates the group contacts, provided by

your service provider, with TTT.

• Click Group DirectoryGroup DirectoryGroup DirectoryGroup Directory on the TTT toolbar.

• This list can be printed using the host application.

Users with Microsoft Windows XP Service Pack 2 installed may encounter a warning when opening

the Group Directory. For more information, see the section on Troubleshooting.

• To sort the Group Directory, click on a column header. The table is sorted, in descending order, according to

the information in the column you selected.

• To change the sort order between descending and ascending, click on the same column header again.

• To dial a number from the Group Directory, click on the desired phone number. TTT places the call.

Dial from Call HistoryDial from Call HistoryDial from Call HistoryDial from Call History

Call History allows users to view their missed calls, received calls, and dialled calls. These calls are listed by category

in reverse chronological order, descending from the most recent to the oldest call record.

• To open the Call History, click Call HistoryCall HistoryCall HistoryCall History on the toolbar.

• To dial from the call history, click on the desired phone number. TTT automatically places the call.

17171717

Dial from Speed Dial DirectoryDial from Speed Dial DirectoryDial from Speed Dial DirectoryDial from Speed Dial Directory

You can dial from the speed dial directory.

• To open the Speed Dial Directory, click Speed Dial DirectorySpeed Dial DirectorySpeed Dial DirectorySpeed Dial Directory on the TTT toolbar.

• To dial from the speed dial directory, click the desired phone number and TTT places the call.

Dial from SearchDial from SearchDial from SearchDial from Search

Use the Search drop-down list to search for a user or contact. The search results can include user listings in the

Group, Personal, Microsoft Outlook Contacts, and LDAP directories, depending on configuration. Your search will

return all users that match your criteria in any field. For example, if you enter “sa” as your criteria, your search

might return users with the first name “Sally” or with the last name “Sanders” as well as users in the department

“sales”.

You can also search for users by phone number. To search for a user:

• Type your criteria in the Search box.

• Press ENTERENTERENTERENTER to execute the search.

• TTT displays the results of your search.

• Click the phone number you want to dial.


18181818

To re-execute a previous search:

• Select a previous search criteria by clicking on the arrow at the right-hand side of the Search box.

• A list of previous search criteria is displayed.

• Select an item in the list. TTT displays the results of your search.

• Click the phone number you want to dial.


NOTENOTENOTENOTE: Please check with your Customer Group Administrator on the directories your TTT is configured to search.

19191919

ReceiveReceiveReceiveReceive CallCallCallCall

AnswerAnswerAnswerAnswer CallCallCallCall

NOTENOTENOTENOTE: You can only answer a call via TTT if you have an Advanced Call Control (ACC) compliant phone. Please check with your Customer Group Administrator if you are unsure.

When you receive a call, TTT remotely displays a call notification window on top of the system tray. You can

answer this call by picking up your handset remotely from the TTT toolbar or by clicking the call notification.

• To answer a call from TTT toolbar, click AnswerAnswerAnswerAnswer.

• To answer a call from the call notification, click on the hyperlinked text hyperlinked text hyperlinked text hyperlinked text in the call notification.

When using TTT with Microsoft Outlook, if the incoming call does not provide a name for the calling party, TTT

checks the number against your Microsoft Outlook contacts and displays the corresponding name if it finds a match.

The call notification stays open for the duration of the alerting call.

You can also transfer the caller to your Voice Mail, save a vCard for the caller, open a URL populated with the caller’s

number, or end the call directly from the call notification.

Call NotificationCall NotificationCall NotificationCall Notification

When you initiate or receive a call, TTT displays a notification window above the system tray, which includes the

other party’s phone number and other information about the call. Clicking the hyperlinked text hyperlinked text hyperlinked text hyperlinked text in the call

notification automatically answers the call.

The call notification stays open for the duration of the alerting call.

If you initiate or receive another call while the first notification is open, the call notifications stack one-on-top–of-

the-other.

20202020

TransferTransferTransferTransfer

Use this method to transfer a call to another specified number when both numbers are connected to your

telephone. Calls may be transferred this way while held, or ringing on your phone. In the latter case, the system

redirects the call before it is answered.

• If the first party is not already on the line, dial a number on your phone or select a number using any of the

methods described in the section Making Calls.

• Place the first party on hold by pressing the HHHHoldoldoldold button on the telephone or the Call Control Toolbar.

Unless you do this you will be unable to initiate or connect other calls.

• Call the second number.

• Initiate the transfer by clicking TransferTransferTransferTransfer on the toolbar. The parties are now connected.

Open URLOpen URLOpen URLOpen URL

When you receive a call, TTT displays a call notification window on top of the system tray.

To open a URL in your browser, click Web Pop URLWeb Pop URLWeb Pop URLWeb Pop URL in the call notification.

This opens a page in your browser window that contains information about the calling party encoded in its URL.

Web Screen Pop, which is detailed in the section Web Screen Pop, must be configured or this icon is locked.

Save vCardSave vCardSave vCardSave vCard

When you receive a call, TTT displays a call notification window on top of the system tray.

You can click a button in this notification to save the caller’s phone number and personal information as a vCard in

Microsoft Outlook. To do this, click Add vCardAdd vCardAdd vCardAdd vCard in the call notification.

Microsoft Outlook Integration, which is detailed in the section Microsoft Outlook Integration, must be enabled or this

icon is locked.

21212121

Voice MailVoice MailVoice MailVoice Mail

Transfer to Voice MailTransfer to Voice MailTransfer to Voice MailTransfer to Voice Mail

You can transfer calls to your Voice Mail from the call notification window.

NOTE: NOTE: NOTE: NOTE: If you redirect to Voice Mail when your Voice Mail service is disabled, the calling party will receive an error

message via Automatic Voice Recording (AVR) stating “The Mailbox of the party you’ve called could not be

found.” Voice Mail must be enabled for this service to function correctly.

End a Call End a Call End a Call End a Call

You can end both incoming and outgoing calls directly from the toolbar and from the call notification window.

• To end a call from the toolbar, click End End End End on the toolbar OR

• To end a call from the call notification, click End CallEnd CallEnd CallEnd Call.

22222222

During During During During a a a a CallCallCallCall

Hold CallHold CallHold CallHold Call

• To hold a call, click HoldHoldHoldHold on the toolbar. The Hold button is greyed out to indicate the held status of the

call.

• To resume a held call, click AnswerAnswerAnswerAnswer on the toolbar. The hold returns to its normal state to indicate the

active status of the call. Note any other active calls in the Call Lines drop-down list are automatically put on

hold.

Initiate NInitiate NInitiate NInitiate N----Way ConferenceWay ConferenceWay ConferenceWay Conference

You can initiate a conference with two or more parties. The maximum number of parties allowed in the conference

call is 8 participants. You must have at least two phone numbers listed in the Call Lines drop-down list. All calls on

the list are added to the conference. These calls can be initiated either by you or by the other parties.

• To start the conference, click ConferenceConferenceConferenceConference on the toolbar.

• To add new incoming or outgoing calls to the conference, answer the call, then click ConferenceConferenceConferenceConference on the

toolbar again with the active call selected (the other calls should be “Conference on Hold”).

• To drop only one participant from the conference, select the participant’s number from the Call Lines drop-

down list and click EndEndEndEnd.

23232323

Call HistoryCall HistoryCall HistoryCall History

You can view call logs using the Call History feature. You can also make calls from Call History. Only viewing call

logs is described in the remainder of this section. For more information about making calls, see the section Dial from

Call History

View Call LogsView Call LogsView Call LogsView Call Logs

To view call logs, click Call History on the toolbar.

The Call History window appears where you can view your dialled, received, and missed calls.

24242424

Options DialogOptions DialogOptions DialogOptions Dialog

The Options dialog allows you to configure the connection and account settings that TTT uses to communicate with

the TIPT server. The left-hand side of the dialog contains a tree view, listing the configuration pages you can access.

The configuration pages you select in the tree view are displayed on the right.

• Click OKOKOKOK to save all changes and close the dialog.

• Click ApplyApplyApplyApply to save all changes without closing the dialog.

• CancelCancelCancelCancel closes the dialog without saving your changes.

GeneralGeneralGeneralGeneral

The General page allows you to configure the automatic login behaviour of TTT.

• Auto login when connected to network automatically logs into TIPT when it detects an active network

connecting on your computer.

• Hide Call Notification disables the call notification window. When this box is checked, the call notification

does not appear when TTT detects an incoming or outgoing call.

• Click OKOKOKOK or ApplyApplyApplyApply to save the changes

25252525

AccountAccountAccountAccount

The Account page allows you to specify your TIPT user name and password. Contact your Customer Group

Administrator if you do not know the appropriate settings. Once you successfully log in, the controls on this page

become inactive.

• Save Username determines whether TTT saves the user name you provide. Check this box to avoid having to

specify your user name each time you log in to the program.

• Save Password determines whether TTT saves the password you provide above. Check this box to avoid

having to specify your password each time you log in to TTT. TTT encrypts your password for greater

security.

26262626

ConnectionConnectionConnectionConnection

The Connection page is pre-filled with connection information for connecting the TTT to the TIPT server that provides

you with telephony services. The controls are greyed and not accessible once the client is logged in. Your Customer

Group Administrator will authorise any variation to these settings.

27272727

DiallingDiallingDiallingDialling Rules Rules Rules Rules

The Dialling Rules page allows you to configure special dialling rules for TTT.

To access an outside line for calls, dial specifies a prefix number that TTT includes automatically when dialling

external numbers.

If entered, this number is pre-pended only to dialled numbers that contain more than six digits. Up to five digits

may be entered in this field.

Valid characters are the numbers 0 to 9 and the symbol “+”. If you include the “+” character, it must be the first

character in the field.

28282828

Microsoft OutlookMicrosoft OutlookMicrosoft OutlookMicrosoft Outlook Integration Integration Integration Integration

The Microsoft Outlook Integration page enables and disables the link between TTT and Microsoft Outlook.

The Enable Microsoft Outlook Integration check box, when checked, makes sure that the Microsoft Outlook integration

features are activated.

NOTENOTENOTENOTE: As of Microsoft Outlook 2007 you are unable to dial a contact in your inbox using the right click-to-dial function.

29292929

ContactsContactsContactsContacts

The Contacts page allows you to configure the way TTT integrates with your Microsoft Outlook contact list.

• The Retrieve contacts from default contact folder only option searches for and retrieves contacts stored in the

default Contacts folder within Microsoft Outlook.

• The Retrieve all contacts option searches for and retrieves contacts stored in any Microsoft Outlook folder.

• Use Microsoft Outlook contacts as preferred CLID lookup for incoming calls determines whether TTT uses the

information saved in your Microsoft Outlook contact list when displaying information about callers, instead

of using group settings or other calling line ID information.

30303030

LDAP IntegrationLDAP IntegrationLDAP IntegrationLDAP Integration

The LDAP Integration page allows you to configure the settings TTT uses to connect to the LDAP directory server.

Contact your Customer Group Administrator if you do not know the appropriate settings.

Enable LDAP Integration determines whether TTT provides LDAP directory lookup services. Checking this box enables

the controls on the Directory page.

31313131

DirectoryDirectoryDirectoryDirectory

The Directory page allows you to provide the configuration settings required for TTT to connect to your business’s

LDAP directory server.

Once you successfully log in, the controls on this page become locked.

• Directory Address specifies the network address of the LDAP directory server.

• Port specifies the port number for the LDAP server. This is compulsory and can be obtained from your

Customer Group Administrator.

• Search Base determines the location in the directory server tree that TTT looks in when executing a search.

• Recursive, when checked, searches all sub-trees within the search base.

• Use SSL (Secure Sockets Layer) determines whether TTT uses SSL to connect to the directory server. Note

that enabling SSL may require the use of a different port.

• Requires Authentication indicates whether TTT must provide a user name and password to the directory

server to conduct searches.

32323232

• Authenticated DN is the user name TTT uses when connecting to the directory server when Requires

Authentication is checked.

• Authenticated Password corresponds to the Authentication DN.

• Search Filter specifies the search filter to apply to all directory searches.

For example, to include the search criteria in the filter you must include (cn=*__SEARCH_TEXT__*).

Alternatively in another example, “(telephoneNumber=*)” restricts search results to users who have a

telephone number assigned.

• Retrieved attributes is a table that controls the way that TTT maps attributes returned from the directory

server to columns displayed in the list of search results.

• In each row of the table, enter an LDAP attribute in the Remote Name column.

In the Local Name column, enter a corresponding local attribute. Typical Remote Name values are “cn”,

“sn”, “telephoneNumber”, “mobile”, “homePhone”, and “mail”.

NOTENOTENOTENOTE: Please contact your Customer Group Administrator if you are unsure about this option.

33333333

Web Screen PopWeb Screen PopWeb Screen PopWeb Screen Pop

The Web Screen Pop page allows you to configure a web page that you can open from the call notification window.

The Web Screen Pop URL determines the URL that TTT opens using the default browser when you click Web Screen Web Screen Web Screen Web Screen

Pop Pop Pop Pop in the Call Notification pop-up window. In addition to the URL, there are a number of optional parameters that

the client can pass to the browser. The following list summarizes these parameters:

• __USER____USER____USER____USER__: The user’s TIPT ID. (Note that in this case the “user” is the TIPT subscriber.)

• __FIRST____FIRST____FIRST____FIRST__: The first name of the user.

• __LAST____LAST____LAST____LAST__: The last name of the user.

• __EMAIL____EMAIL____EMAIL____EMAIL__: The e-mail address of the user.

• __GROUP____GROUP____GROUP____GROUP__: The name of the TIPT group the user belongs to.

• __SERVICE___SERVICE___SERVICE___SERVICE_PROVIDER_PROVIDER_PROVIDER_PROVIDER__: Telstra.

• __PHONE____PHONE____PHONE____PHONE__: The phone number of the user.

• __REMOTE_PHONE____REMOTE_PHONE____REMOTE_PHONE____REMOTE_PHONE__: The phone number of the remote party.

• __REMOTE_NAME____REMOTE_NAME____REMOTE_NAME____REMOTE_NAME__: The name of the remote party (when available).

• __CALL_TYPE____CALL_TYPE____CALL_TYPE____CALL_TYPE__: “Incoming” or “Outgoing”.

34343434

AboutAboutAboutAbout

The About page displays the version, copyright notices, and product disclaimers associated with TTT. It can be

useful when providing information to support representatives for your service provider.

The information displayed is as follows:

• TTT Version

• TTT Disclaimer

The About information is important in providing information for the purpose of technical support.

35353535

Services DialogServices DialogServices DialogServices Dialog

The Services dialog allows you to configure the calling features provided by TTT, such as Voice Messaging,

CommPilot Express profiles, Call Forwarding, and Call Waiting. The left hand side of the dialog contains a tree view

listing the configuration pages you can access. The configuration pages you select in the tree view are displayed on

the right.

• Click OKOKOKOK to save all changes and close the dialog.

• Click ApplyApplyApplyApply to save all changes without closing the dialog.

• Click CancelCancelCancelCancel to close the dialog without saving your changes.

Incoming CallsIncoming CallsIncoming CallsIncoming Calls

The Incoming Calls pages in the Options dialog configure the services that apply to calls that you receive.

AnonymAnonymAnonymAnonymous Call Rejectionous Call Rejectionous Call Rejectionous Call Rejection

The Anonymous Call Rejection service blocks all incoming calls from people who have restricted their phone

numbers from being shown to their call recipients.

36363636

Call Forwarding Call Forwarding Call Forwarding Call Forwarding AlwaysAlwaysAlwaysAlways

The Call Forwarding Always service forwards all incoming calls to a specified phone number.

To activate this service

• Click OnOnOnOn in the Call Forwarding Always configuration field in the Services Dialogue OR

• Click Call Forwarding AlwaysCall Forwarding AlwaysCall Forwarding AlwaysCall Forwarding Always on the toolbar. This highlights the button and enables the service.

• If Call Forwarding Always is not yet configured when you use this icon to activate the service, TTT

opens the Services dialog to the Call Forwarding Always page for you to configure the service.

• Enable Play Ring Reminder when call is forwarded for the phone to beep a short reminder tone each

time a call is forwarded.

• * Calls Forward to specifies the phone number to which TTT redirects calls using this service.

The following describes the toolbar states of this service in the Telephony Toolbar Services Toolbar:

Service State Services Toolbar Icon Description

Deactivated

Call Forwarding Always is deactivated.

Activated

Call Forwarding Always is active and the button is highlighted.

Disabled

Call Forwarding Always has been disabled and cannot be activated from the Toolbar.

37373737

Call Forwarding No AnswerCall Forwarding No AnswerCall Forwarding No AnswerCall Forwarding No Answer

The Call Forwarding No Answer service forwards unanswered calls to a specified number after a set number of rings.


• Click OnOnOnOn in the Call Forwarding No Answer configuration field in the Services Dialogue OR

• Click Call Forwarding Call Forwarding Call Forwarding Call Forwarding No Answer No Answer No Answer No Answer on the toolbar. This highlights the button and enables the service.

• If Call Forwarding No Answer is not yet configured when you use this icon to activate the service, TTT

opens the Services dialog to the Call Forwarding No Answer page for you to configure the service.


• Numbers of rings before forwarding is the number of times your phone must ring before TTT forwards an

incoming call.

NOTE :NOTE :NOTE :NOTE : This drop-down controls the number of phone rings before forwarding for your entire service, including

Voice Mail. This value can be set to None (instant forwarding) or 1-20 Rings.



Deactivated Call Forwarding No Answer is deactivated.

Activated

Call Forwarding No Answer is active and the button is highlighted.

Disabled Call Forwarding No Answer has been disabled and cannot be activated from the Toolbar.

38383838

Call Forwarding BusyCall Forwarding BusyCall Forwarding BusyCall Forwarding Busy

The Call Forwarding Busy service forwards incoming calls to a specified phone number when all available lines are in

use or you are busy on a call with no Call Waiting enabled.


• Click OnOnOnOn in the Call Forwarding Busy configuration field in the Services Dialogue OR

• Click Call Forwarding Call Forwarding Call Forwarding Call Forwarding Busy Busy Busy Busy on the toolbar. This highlights the button and enables the service.

• If Call Forwarding Busy is not yet configured when you use this icon to activate the service, TTT opens

the Services dialog to the Call Forwarding Busy page for you to configure the service.




Deactivated Call Forwarding Busy is deactivated.

Activated

Call Forwarding Busy is active and the button is highlighted.

Disabled

Call Forwarding Busy has been disabled and cannot be activated from the Toolbar.

39393939

Do Not DisturbDo Not DisturbDo Not DisturbDo Not Disturb

The Do Not Disturb service forwards all incoming calls to your Voice Mail service. If you do not have a Voice Mail

service configured, callers hear a busy tone.


• Click OnOnOnOn in the Do Not Disturb configuration field in the Services Dialogue OR

• Click Do Not Disturb Do Not Disturb Do Not Disturb Do Not Disturb on the toolbar. This highlights the button and enables the service.

• Enable Play Ring Reminder when call is forwarded for the phone to beep a short reminder tone each

time a call is forwarded.



Deactivated

Do Not Disturb is deactivated.

Activated

Do Not Disturb is active and the button is highlighted.

Disabled Do Not Disturb has been disabled and cannot be activated.

40404040

External Calling Line ID DeliveryExternal Calling Line ID DeliveryExternal Calling Line ID DeliveryExternal Calling Line ID Delivery

The External Calling Line ID Delivery service allows you to view the calling line information for incoming calls from

external phone numbers.

Internal Calling Line ID DeliveryInternal Calling Line ID DeliveryInternal Calling Line ID DeliveryInternal Calling Line ID Delivery

The Internal Calling Line ID Delivery service allows you to view the calling line information for incoming calls from

members of your group, when group members use extension dialling within the group.

41414141

SimultSimultSimultSimultaneous Ringaneous Ringaneous Ringaneous Ring

The Simultaneous Ring service rings multiple phone numbers for each incoming call. Any of the phone numbers

specified for this service may be used to answer those calls.


• Click OnOnOnOn in the Simultaneous Ring configuration field in the Services Dialogue OR

• Click Simultaneous Ring Simultaneous Ring Simultaneous Ring Simultaneous Ring on the toolbar. This highlights the button and enables the service.

• When the Don’t ring my Simultaneous Ring Numbers if I’m already on a call option is selected, the

Simultaneous Ringing service is temporarily deactivated whenever you are engaged in an active call.

• When the Ring all my Simultaneous Ring Numbers for all incoming calls option is selected, the

Simultaneous Ringing service rings all numbers specified in the list that follows for each incoming

call, regardless of whether you currently are engaged in an active call.

42424242

Sim Ring Phone List specifies the list of additional phone numbers that ring for each incoming call.

You can perform the following on the Sim Ring Phone List:

• View the Sim Ring Phone List and add a new number to the Sim Ring Phone List.

• Modify an existing number in the Sim Ring Phone List

• Delete an existing number from the Sim Ring Phone List.

• To add a new phone number, click AddAddAddAdd. A new item with the text, Double click to add number here prompt is

inserted into the list control, allowing you to enter a phone number that will ring simultaneously with the

office phone.

• To modify an existing phone number, double-click the number and then modify the information, as required

using the keyboard.

• To delete a phone number, select the number and click the Delete button.

• Set your Answer Confirmation setting for each phone entry in this service by clicking on the checkboxes.

Answer Confirmation, when activated, requires you to dial a number on the keypad to accept the call on

picking up your handset. This feature prevents a target simultaneous ring party’s Voice Mail from

inadvertently answering a Simultaneous Ring. In this way this service ensures that a live party picks up the

incoming call.



Deactivated

Simultaneous Ring is deactivated.

Activated

Simultaneous Ring is active and the button is highlighted.

Disabled

The Simultaneous Ring service has been disabled and cannot be activated from the Toolbar.

43434343

CoCoCoCommPilot ExpressmmPilot ExpressmmPilot ExpressmmPilot Express

NOTENOTENOTENOTE: When using CommPilot Express, you should not enable other services such as Call Notify, Call Forwarding, or Simultaneous Ringing.

CommPilot Express allows you to manage your personal services using four configurable profiles. These profiles

control your incoming calls automatically. Even when off-site, you can still manage your active profile on the web

or over the phone.

With CommPilot Express, you can manage your calls based on your schedule. This allows you to work efficiently

without unnecessary interruption.

• To set the active CommPilot Express profile, select a profile from the CommPilot drop-down list on the

toolbar.

• To disable all profiles, select CommPilot – None.

You can also set the active CommPilot Express profile on the CommPilot Express page of the Services dialog. The

Services dialog for TTT allows you to configure the settings that apply to each of your CommPilot profiles.

44444444

Available Available Available Available ---- In Office In Office In Office In Office

The Available – In Office profile determines how incoming calls are handled when you are working at your desk.

Also ring this phone number specifies an additional number for TTT to ring for each incoming call. Calls may be

answered from either this number or your main number.

If you select:

• If Busy: Have Voice Messaging take the call, TTT forwards all incoming calls to your Voice Messaging service if

you have no available open lines.

• If Busy: Forward to this Phone Number, then all incoming calls are forwarded to the specified phone number if

you have no available lines.

• If No Answer: Have Voice Messaging take the call, TTT forwards all incoming calls to your Voice Messaging

service if you do not answer after a set number of rings.

• No Answer: Forward to this Phone Number, TTT forwards all incoming calls to the specified phone number if

you do not answer after a set number of rings.

45454545

Available Available Available Available –––– Ou Ou Ou Out of Officet of Officet of Officet of Office

The Available – Out of Office profile determines how incoming calls are handled when you are not working at your

desk, but are still able to receive calls.

If you select:

• Have Voice Messaging take the call, all incoming calls are forwarded to your Voice Messaging service.

• Forward to this Phone Number, TTT forwards all incoming calls to a specified number.

Also e-mail me when a call comes in at determines whether TTT also sends an e-mail notification to the address you

specify below it each time you receive an incoming call.

The E-mail address specifies the e-mail address TTT notifies when you receive an incoming call.

46464646

BusyBusyBusyBusy

The Busy profile determines how incoming calls are handled when you are busy.

• Send all calls to Voice Messaging except calls from these Phone Numbers forwards all incoming calls to your

Voice Mail service, when selected. You can configure up to three numbers to be excluded from this service in

the blank fields provided. Calls to these numbers are instead forwarded to the phone number you specify

below it.

• Which will be forwarded to determines the phone number to which TTT forwards the Voice Mail exempt

callers specified above.

• Also E-mail me a notification when a Voice Message is received should be selected to receive an e-mail

notification each time you receive a Voice Mail message.

Note: Note: Note: Note: The three excluded numbers in Send all calls to Voice Messaging except calls from these Phone Numbers must

be in 11-digit international E-164 Format for the call filtering to function correctly, e.g. +614 xxxx xxxx for

mobile phone or +613 xxxx xxxx for land line.

47474747

UnavailableUnavailableUnavailableUnavailable

The Unavailable profile determines how incoming calls are handled when you are not free to take calls, such as

during outside business hours or when on holidays.

If you select:

• Send all calls to Voice Messaging except calls from these Phone Numbers, all incoming calls are forwarded to

your Voice Mail service. You can configure up to three numbers to be excluded from this service in the blank

fields provided. Calls to these numbers are instead forwarded to the phone number you specify. To

determine which phone number TTT forwards the excluded callers to, select Which will be forwarded to.

• No answer Greeting, its standard “no answer” greeting message plays to incoming calls.

• Unavailable Greeting, your Voice Mail service is enabled to play its standard “unavailable” greeting message

to incoming calls.

Note: Note: Note: Note: The three excluded numbers in Send all calls to Voice Messaging except calls from these Phone Numbers must

be in 11-digit international E-164 Format for the call filtering to function correctly, e.g. +614 xxxx xxxx for

mobile phone or +613 xxxx xxxx for land line.

48484848

Outgoing CallsOutgoing CallsOutgoing CallsOutgoing Calls

The Outgoing Calls section in the Options dialog configures the services that apply to calls that you initiate.

Automatic CallbackAutomatic CallbackAutomatic CallbackAutomatic Callback

The Automatic Callback service allows you to have TTT monitor a busy party in your group and to automatically

establish a call on your behalf when the busy party becomes available.

For this service to operate correctly, please note:

• The destination party should have Call Waiting and their Voice Mail service disabled when they are busy on

other calls as this service triggers on Busy Tone.

• Extension dialling must be used to utilise this feature.

49494949

Calling Line ID Delivery BlockingCalling Line ID Delivery BlockingCalling Line ID Delivery BlockingCalling Line ID Delivery Blocking

The Calling Line ID Delivery Blocking service prevents other parties from seeing your phone number or calling line

information when engaged in calls with you.

50505050

Call ControlCall ControlCall ControlCall Control

The Call Control pages in the Options dialog allow you to configure your Call Control services.

Call WaitingCall WaitingCall WaitingCall Waiting

The Call Waiting service allows you to receive call notifications and to answer incoming calls while engaged in

another active call. If this service is disabled, the calling party receives a busy tone when you are on the telephone.

51515151

Remote OfficeRemote OfficeRemote OfficeRemote Office

The Remote Office service allows you to substitute a different phone number for your office phone number when

you are using TTT. Calls made through TTT dial through the substitute number rather than the office number, but

show the office number as the caller.


• Click OnOnOnOn in the Remote Office configuration field in the Services Dialogue OR

• Click Remote OfRemote OfRemote OfRemote Office fice fice fice on the toolbar. This highlights the button and enables the service.

• If Remote Office is not yet configured when you use this icon to activate the service, TTT opens the

Services dialog to the Remote Office page for you to configure the service.

• Remote Office Number specifies the alternate phone number to substitute for your office number.



Deactivated

Remote Office is deactivated.

Activated

Remote Office is active and the button is highlighted.

Disabled

The Remote Office service has been disabled and cannot be activated from the Toolbar.

52525252

MessagingMessagingMessagingMessaging

The Messaging pages in the Options dialog allow you to configure your Voice Mail settings.

Voice Voice Voice Voice MessagingMessagingMessagingMessaging

The Voice Management page specifies how the system handles your voice messages.

You can select how you want the calls to be treated by selecting from the following:

Send All Calls to Voice Mail, Send Busy Calls to Voice Mail, and Send Unanswered Calls to Voice Mail. Changes made via

the web portal are not reflected in real time for TTT. You must log in again to see the new values.

• When the Use unified messaging option is selected, you can access your voice messages via e-mail and

phone. Messages are sent as mail attachments to the e-mail address configured for your account.

• “Use Phone Message Waiting Indicator” determines whether your phone provides an alternate dial tone

and a visual indicator on some phone models to indicate that you have a message waiting.

• If the “Forward it to this e-mail address” option is selected you will be able to access your voice messages only

by e-mail. Messages are sent as mail attachments to the specified e-mail address, and are not available for

retrieval by phone.

53535353

In addition to Forward it to this e-mail address and Use unified messaging there are additional Voice Management

options in the options pane:

• Notify me by e-mail of the new voice message at this address determines whether the system sends a

notification e-mail to the specified address each time it records a voice mail. This notification will contain

the date and time the voice message was recorded, but does not contain the content of the voice message

itself as an attachment.

• Email a carbon copy of the voice message to, when checked, sends a carbon copy of the voice message in .wav

format to the specified address. This is in addition to Forward it to this e-mail address.

• Transfer on ‘0’ to Phone Number allows the caller that has been diverted to voice mail to “dial 0” and be

forwarded to the specified number. This is reflected in the AVR played to the caller when they interacting

with the voice mail system.

54545454

TroubleshootingTroubleshootingTroubleshootingTroubleshooting

This section contains information that may aid those having difficulty using TTT. If your problem is not listed in the

index, contact your Customer Group Administrator for assistance.

Using Using Using Using TTTTTTTTTTTT with Microsoft Windows Service Pack 2 (SP2) with Microsoft Windows Service Pack 2 (SP2) with Microsoft Windows Service Pack 2 (SP2) with Microsoft Windows Service Pack 2 (SP2)

When you open the Group Directory or Personal Directory from the toolbar, Microsoft Internet Explorer may display

the following warning message

To help protect your security, Microsoft Internet Explorer has restricted this webpage from running scripts for ActiveX

controls that could access your computer. Click here for options...

This warning is triggered by the JavaScript used by TTT to sort directory listings.

The following instructions override the warning and open the directory:

• Click the message.

The notification turns blue and displays a pop-up menu.

• Select Allow Blocked Content from the pop-up menu.

Another security warning appears.

• Click YesYesYesYes.

55555555

TTTTTTTTTTTT Not Visible in Not Visible in Not Visible in Not Visible in Microsoft OutlookMicrosoft OutlookMicrosoft OutlookMicrosoft Outlook

If the TTT toolbar is not visible in Microsoft Outlook, follow these steps. If the problem is not solved, contact your

Customer Group Administrator.

• Right-click an empty area of the toolbar region in Microsoft Outlook.

A menu appears listing all the toolbars currently registered.

Make sure that the TTT entries (Telephony Toolbar Call Control and Telephony Toolbar Services) are checked.

If the TTT entries are not listed, continue with the next step.

Enable Enable Enable Enable TTTTTTTTTTTT within within within within Microsoft OutlookMicrosoft OutlookMicrosoft OutlookMicrosoft Outlook 2000/2000/2000/2000/2002/2002/2002/2002/2003200320032003

• Click on Help or About Microsoft Office Microsoft Outlook.

56565656

In the dialog box select Disabled Items. If the Telephony Toolbar is visible on the list, click EnableEnableEnableEnable and restart Microsoft

Outlook.

Enable Enable Enable Enable TTT within TTT within TTT within TTT within Microsoft OutlookMicrosoft OutlookMicrosoft OutlookMicrosoft Outlook 2007 2007 2007 2007

• Click on Tools

• In the dialog box select Trust Center.

57575757

• Select Add-ins and Disabled Items in the Manage drop down list. Click on “Go…”

If the Telephony Toolbar is visible on the list, click EnableEnableEnableEnable and restart Microsoft Outlook

58585858

I Have Not Been Licensed to I Have Not Been Licensed to I Have Not Been Licensed to I Have Not Been Licensed to UUUUse se se se TTTTTTTTTTTT

This error indicates that your service provider has not added the TTT Client License to your list of services.

Contact your Customer Group Administrator to activate TTT for your account.

TTTTTTTTTTTT NNNNot Visible in ot Visible in ot Visible in ot Visible in MicrMicrMicrMicrosoft Internet Explorerosoft Internet Explorerosoft Internet Explorerosoft Internet Explorer

If the TTT toolbar is not visible in Microsoft Internet Explorer, follow these steps:

• Right-click an empty area of the toolbar region in Explorer.

A menu appears listing all the toolbars currently registered.

• Make sure that the TTT entries (Telephony Toolbar Call Control, Telephony Toolbar Services) are checked.

If your problem is still not solved, contact your service provider.

59595959

GlossaryGlossaryGlossaryGlossary

Active Call: This is the call you are currently talking to or dealing with.

AVR: Automated Voice Recording

Ringing (in): This is the equivalent to a phone ringing locally.

Ringing (out): This is the equivalent of a phone ringing on the called party’s held call.

Calling Party: This is the party who you are receiving a call from.

Called Party: This is the party that you have dialled.

CLID: Calling Line Identification

IE: Internet Explorer

TIPT: Telstra Internet Protocol (IP) Telephony

TTT: Telstra Telephony Toolbar

Documents

TTT User Guide