Form 23641 (3/09)

1200 rpm tefc electric motor1500 rpm tefc electric motorSingle V-Belt 1500 rpm drive Rigid I-beam base frame with motor mountLeft-hand driveMedium scalping option on 6' x 20' screen6" (152 mm) side liner extension on 6' x 20', 7' x 20' and 8' x 20' screensWire screen clothWedge tensioning for wire cloth

Cylinder tray deckEnd-tension bottom deck5' wire cloth panels on 6' x 20' and 7' x 20' screensDivided deck on 5', 6' and 7' wide screensFlat decks for modular media on 5', 6', 7' and 8' wide screensSpray systemRubber spray hole coversSpecial-length discharge lipsRubber spring suspension

Standard Features

TSH and TSS ElJay® Oval Stroke Screens

Adjustable oval stroke angle, stroke length and speedPatented “flow through” bearing lubricationPatented baffled splash oil lubrication systemHuck-bolted screen box construction (no welds)Through-hardened forged alloy steel, high performance gearsPatented double O-ring sealed vibrator constructionHand access holes (standard on 20' long screens)High strength 1/4" (6.35 mm) steel side plates* *HR 5/16" (7.94 mm) steel side plates on models 6202 and 7202Gland-type non-wearing shaft sealSelf-aligning, two row spherical roller bearingsClamp bars adjust for all wire media thicknessSpherical washer tensioning systemHigh strength tapered steel spindles

Heavy wall shaft tubesAbrasion resistant discharge lip linersSpray pipe knock-outsKeyless hub locking assemblySingle V-belt 1200 rpm driveExtended life V-beltRight-hand driveEnclosed belt guardAdjustable speed motor drive sheaveSpring-loaded belt tension idlerBolt-on feed box with replaceable bottom linerCoil suspension springsRubber surge snubbersSingle crown deck

Optional Equipment

TSH 8203 Screen Shown

TSH and TSS ElJay® Oval Stroke Screens

Specifications

Form 23641 (3/09)

Effective Date: March 2009. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2009 Terex Corporation.

Terex USA, LLC • 909 17th Street NE • Cedar Rapids IA 52402 USA • TEL 319 363 3511 • WEB www.cedarapids.com

Screen Size 1200 rpmhp (kW)

**Weightlbs (kg)

Dimension in inches (mm) for Standard Coil Springs ***Subtract 1.25" (32 mm) for Optional Rubber Springs

H*** L W A*** B*** C*** D*** E F

TSH 4122-24 20 (15) 8,700 (3946) 51-1/4 (1302) 144 (3658) 49-1/2 (1257) 41-1/2 (1054) 6-3/8 (162) 30-1/2 (775) 10 (254) 59 (1499)

TSH 4123-24 20 (15) 10,500 (4763) 62-5/8 (1591) 144 (3658) 49-1/2 (1257) 58-5/8 (1489) 7-3/4 (197) 31-7/8 (810) 47-7/8 (1216) 10 (254) 59 (1499)

TSH 4142-24 20 (15) 9,800 (4445) 51-3/4 (1314) 168 (4267) 49-1/2 (1257) 41-3/4 (1060) 6-5/8 (168) 30-3/4 (781) 10 (254) 59 (1499)

TSH 4143-24 20 (15) 11,600 (5262) 67-3/4 (1721) 168 (4267) 49-1/2 (1257) 57-3/4 (1469) 6-5/8 (168) 30-3/4 (781) 46-3/4 (1187) 10 (254) 59 (1499)

TSH 5142-24 25 (19) 10,800 (4899) 52-5/8 (1337) 168 (4267) 61-1/2 (1562) 42-5/8 (1083) 7-1/2 (191) 31-5/8 (803) 10 (254) 71 (1803)

TSH 5143-24 25 (19) 13,000 (5897) 67-3/4 (1721) 168 (4267) 61-1/2 (1562) 57-3/4 (1469) 6-5/8 (168) 30-3/4 (781) 46-3/4 (1187) 10 (254) 71 (1803)

TSH 5143-26 25 (19) 14,000 (6350) 71 (1803) 168 (4267) 61-1/2 (1562) 61 (1549) 7 (178) 34 (864) 50 (1270) 12 (305) 71 (1803)

TSH 5162-24 25 (19) 11,600 (5262) 54-5/8 (1387) 192 (4877) 61-1/2 (1562) 42-5/8 (1083) 7-1/8 (181) 31-3/4 (806) 12 (305) 71 (1803)

TSH 5162-26 25 (19) 12,500 (5670) 56-5/8 (1438) 192 (4877) 61-1/2 (1562) 44-5/8 (1133) 6-1/2 (165) 33-3/4 (857) 12 (305) 71 (1803)

TSH 5163-26 30 (22) 15,300 (6940) 73-1/4 (1861) 192 (4877) 61-1/2 (1562) 61-1/4 (1556) 7-1/8 (181) 34-1/4 (870) 50-1/4 (1276) 12 (305) 71 (1803)

TSH 6162-32 30 (22) 15,100 (6849) 57-1/2 (1461) 192 (4877) 76 (1930) 45-1/2 (1156) 5 (127) 31-1/2 (800) 12 (305) 87 (2210)

TSH 6163-32 40 (30) 19,100 (8664) 73-7/8 (1877) 192 (4877) 76 (1930) 61-7/8 (1572) 5-5/8 (143) 32-1/2 (826) 43-3/8 (1102) 12 (305) 87 (2210)

TSH 6202-32 40 (30) 18,260 (8283) 59-7/8 (1521) 240 (6096) 76 (1930) 48 (1219) 6-3/4 (171) 34-1/8 (867) 12 (305) 87 (2210)

TSH 6203-32 40 (30) 21,860 (9916) 76-1/2 (1943) 240 (6096) 76 (1930) 64-3/8 (1635) 6-3/4 (171) 34-1/8 (867) 52-1/4 (1327) 12 (305) 87 (2210)

TSH 7202-38 50 (37) 21,900 (9955) 58-1/2 (1486) 240 (6096) 88 (2235) 46-1/2 (1239) 7-1/8 (181) 38-1/4 (972) 12 (305) 99 (2515)

TSH 7203-38 50 (37) 26,450 (11998) 82 (2083) 240 (6096) 88 (2235) 69-5/8 (1768) 7-1/8 (181) 38-1/4 (972) 58-3/8 (1482) 12 (305) 99 (2515)

TSH 8202-38 50 (37) 23,440 (10654) 64 (1626) 240 (6096) 100 (2540) 52 (1321) 7 (178) 38-1/8 (963) 12 (305) 111 (2819)

TSH 8203-38 50 (37) 28,390 (12878) 82 (2083) 240 (6096) 100 (2540) 69-1/2 (1765) 7 (178) 38-1/8 (963) 58-1/4 (1480) 12 (305) 111 (2819)

*TSS 6202-32 40 (30) 18,500 (8391) 68-7/8 (1750) 240 (6096) 76 (1930) 44-1/4 (1124) 2-1/8 (538) 31-1/8 (790) 12 (305) 87 (2210)

*TSS 6203-32 40 (30) 22,170 (10060) 84 (2134) 240 (6096) 76 (1930) 60-3/4 (1543) 3 (76) 32-3/8 (822) 48-38 (1229) 12 (305) 87 (2210)

*TSS 7202-38 50 (37) 20,780 (9426) 74-3/8 (1889) 240 (6096) 88 (2235) 48-7/8 (1242) 2-1/2 (64) 35-7/8 (911) 12 (305) 99 (2515)

*TSS 7203-38 50 (37) 24,280 (11010) 92-3/8 (2346) 240 (6096) 88 (2235) 66-7/8 (1699) 2-1/2 (64) 35-7/8 (911) 53-7/8 (1369) 12 (305) 99 (2515)

*TSS screens have 2.7° sloped basket **Weights include base frame, motor mount, belt guard, motor and wire screen cloth.For installation use only certified engineering drawings.

Maximum stroke 3/4" (19 mm) (stroke can be reduced by removing weight plugs)Recommended speed range 675 - 875 rpmMaximum feed size 10" (254 mm) 6' x 20' medium scalping screen 14" (356 mm)Maximum top deck opening 5" (127 mm)Maximum drop of feed 18" (457 mm)Feed box liners (AR plate) 1/4" (6 mm)Discharge lip liner thickness (AR plate) 1/4" (6 mm)

Bearing size: 24 120 mm 26 130 mm 32 160 mm 38 190 mmStandard wire cloth length: 12' Screen 6' (1829 mm) 14' Screen 7' (2134 mm) 16' and 20' Screens 4' (1219 mm)

H

L

BC

D

A

35.25"(896 mm)

F

W

A

E

4" (102 mm)14" (356 mm) on 4' (1219) Screen, 18" (457 mm) on 5' (1524) Screen24" (610 mm) on 6' (1829), 7' (2134) and 8' (2438) Screen

Right side drive standard, left side drive optional.

14" (356 mm) on 4' (1219) Screen, 18" (457 mm) on 5' (1524) Screen24" (610 mm) on 6' (1829), 7' (2134) and 8' (2438) Screen