Truck-Lite LED Lighting Source: Light Emitting Diodes (LEDs), 12v designed at 13.5v, .05 amp 24v designed at 28v, .03 amp LED Model 15 Product Rectangular Sealed Features & Benefits

392

TRUCKLITE LED LIGHTING

Features & Benefits· New LED Lifetime Systems Warranty - Click Limited Warranty image for

details· Electronics completely sealed in epoxy to resist corrosion & moisture· Sonically sealed lens & housing· Less susceptible to shock & vibration· Uses standard mounting holes & accessories· Draws less current, allowing more power for other vehicle requirements· Direct pin-to-circuit board solders assure vibration resistant contacts· Permanently affixed LED flange mount version· Wide groove grommet· SureSeal plug assembly keeps corrosives from lamp· Housing assembly with Light Emitting Diodes· High impact polycarbonate lens

Technical SpecificationsMaterial:Polycarbonate lens, housing & flangePVC grommet16 gauge wireLight Source:Light Emitting Diodes (LEDs)Designed at 14v, .03 amp (red) & .08 (yellow)Kit Components:TL10050R/Y grommet kits:(1) - TL10250R/Y lamp, (1) - TL10700 grommet,

(1) - TL93745 plugTL10051R/Y flange kits:(1) - TL10251R/Y lamp & flange, (1) - TL93745 plugRecommended Accessories:TL10705 grommet cover, TL10715 flange cover

LED Model 10 Products 2-1/2

Part No. TL10050RLED Grommet Kits, Red

Part No. TL10050YLED Grommet Kit, Yellow

Part No. TL10051RLED Flange Kit, Red

Part No. TL10051YLED Flange Kit, Yellow

Part No. TL10250RLED Lamp, Red

Part No. TL10250YLED Lamp, Yellow

Features & Benefits· LED Limited Warranty - Click Limited Warranty image for details· Innovative optic design allows one lamp the ability to function as two· Electronics completely sealed in epoxy to resist corrosion & moisture· Sonically sealed lens & housing· Meets PC requirements on a 45 angle using all mounting devices· Less susceptible to shock & vibration· Uses standard mounting holes & accessories· Draws less current, allowing more power for other vehicle requirements· Direct pin-to-circuit board solders assure vibration resistant contacts· High impact polycarbonate lens· Standard bullet terminal plug· New low profile version available· Housing assembly with Light Emitting Diodes· Mounting grommet· Unique reflector assembly redirects light

Technical SpecificationsMaterial: Polycarbonate lens, housing & flange, PVC grommet, 16 gauge wireLight Source: Light Emitting Diodes (LEDs)Designed at 14v, .1 ampKit Components: TL10075R/Y grommet kits: (1) - TL10275R/Y lamp (1) - TL10700 grommet (1)- TL94964 plugTL10079R/Y flange kits: (1) - TL10279R/Y lamp & flange, (1) - TL94964 plugTL10085R/Y grommet kits: (1) - TL10375R/Y lamp, (1) - TL10700 grommet,(1) - TL93745 plugTL10090R/Y gray flange kits: (1) - TL10379R/Y lamp & flange, (1) - TL93745 plug

LED Model 10 Combination Products 2-1/2

Part No. TL10075YLED Flange Kit, YellowPart No. TL10275RLED Lamp, RedPart No. TL10275YLED Lamp, Yellow

393

Features & Benefits· LED Limited Warranty - Click Limited Warranty image for details· Innovative optic design allows one lamp the ability to function as two· Electronics completely sealed in epoxy to resist corrosion & moisture· Sonically sealed lens & housing· Meets PC requirements on a 45 angle using all mounting devices· Less susceptible to shock & vibration· Uses standard mounting holes & accessories· Draws less current, allowing more power for other vehicle requirements· Direct pin-to-circuit board solders assure vibration resistant contacts· High impact polycarbonate lens· Standard bullet terminal plug· Housing assembly with Light Emitting Diodes· Mounting grommet· Unique reflector assembly redirects light

Technical SpecificationsMaterial: Polycarbonate lens, housing & flange, PVC grommet, 16 gauge wireLIGHT SOURCE: Light Emitting Diodes (LEDs)Designed at 14v, .1 ampKit Components:TL10086R/Y grommet kits: (1) - TL10286R/Y lamp, (1) - TL10700 grommet (1)- TL94964 plugTL10088R/Y black flange kits: (1) - TL10288R/Y lamp & flange, (1) - TL94964 plugTL10089R/Y gray flange kits: (1) - TL10289R/Y lamp & flange, (1) - TL94964 plugRecommended Accessories:10705 grommet cover, 10715 flange cover

LED Model 10 LOW PROFILE Combination Products 2-1/2

Part No. TL10288Y

LED Lamp & BlackFlange, Yellow

Features & Benefits· High impact polycarbonate bracket is available in gray or black· Features snap-fit mount for quick installation & easy replacement· Bracket may be surface mounted or used with bracket, TL42722· Optional mounting gasket improves seal between lamp & body

Technical SpecificationsMaterial:Polycarbonate bracketKit Components:TL15011/TL15040 kits:(1) - TL15208 or TL15205 12v lamp(1) - TL15729 gray bracketTL15012/TL15041 kits:(1) - TL15208 or TL15205 12v lamp(1) - TL15730 black bracket

Part No. TL15040

Gray, kit w/12v LED

Part No. TL15041

Black, kit w/12v LED

Model 15 License Kits

Features & Benefits•Designed to fit applications requiring minimal space•Features stainless steel bar with three LED Model 15 lamps on 6" centers•Electronics completely sealed in epoxy to resist corrosion & moisture•Sonically sealed lens & housing Less susceptible to shock & vibration•Draws less current, allowing more power for other vehicle requirements•Direct pin-to-circuit board solders assure vibration resistant contacts

Technical SpecificationsMaterial: Polycarbonate lens & housing, Stainless steel bar, 14 gauge wireLight Source: Light Emitting Diodes (LED), Designed at 14v, .05 ampsKit Components: TL15050R kit: (3)- TL15250R LED lamps(1) - TL00808 ID bar (1) - TL93943 wiring harness

Part No. TL15050R

Red, LED Model 15 ID Bar Kit

LED Model 15 StainlessSteel ID Bar


394

Part No. TL15205R

White, Model 15 LED 12 Volt

LED Model 15 Products Rectangular Sealed

Features & Benefits•US Patent #5934798 applies to all LED License Lamp Applications

•Meets SAE J587 & European ECE Regulations 4

•Electronics sealed in epoxy to resist corrosion & moisture Less susceptibleto shock & vibration

•Compatible with standard mounting holes & accessories

•Sealed polycarbonate lens & housing design evenly distributes light

•Hard-wired design w/adapter plug for quick changeover without rewiring

Technical SpecificationsMaterial: Polycarbonate lens & housingLight Source: Light Emitting Diodes (LEDs), 12v designed at 13.5v, .05 amp24v designed at 28v, .03 amp

LED Model 15 Product Rectangular Sealed

Features & Benefits• Designed to fit applications requiring minimal space

• Electronics completely sealed in epoxy to resist corrosion & moisture

• Less susceptible to shock & vibration

• Uses standard mounting holes & accessories

• Draws less current, allowing more power for other vehicle requirements

• Direct pin-to-circuit board solders assure vibration resistant contacts

• High impact polycarbonate lens

• Housing assembly with Light Emitting Diodes

Technical SpecificationsMaterial: Polycarbonate lens & housing, PVC grommet, 16 gauge wireLight Source: Light Emitting Diodes (LEDs)Designed at 14v, .05 ampKit Components: TL15051R/Y kits: (1) - TL15250R/Y lamp,(1) - TL15702 grommet, (1) - TL94964 plugPart No. TL15250R

Red, Model 15 LED Lamp

Part No. TL15250Y

Yellow, Model 15 LED Lamp


395

LED Model 18 Products SealedFeatures & Benefits• Electronics completely sealed in epoxy to resist corrosion & moisture• Uses standard mounting holes & accessories• Less susceptible to shock & vibration• Draws less current, allowing more power for other vehicle requirements• Not suitable for PC requirements• Meets SAE J592 standards• Red & Yellow versions available Hard wired design• High impact polycarbonate lens• Housing assembly with Light Emitting Diodes

Technical SpecificationsMaterial: Polycarbonate lens & housing, 18 gauge wireLight Source: Light Emitting Diodes (LEDs),Designed at 14v, .05 amp

Part No. TL18050Y

LED Lamp w/ Blunt Cut, Yellow

Features & Benefits• Innovative optic design allows combination lamp the ability tofunction as two

•Electronics completely sealed in epoxy to resist corrosion &moisture

•Draws less current, allowing more power for other vehicle requirementsLess susceptible to shock & vibration

•Direct pin-to-circuit board solders assure vibration resistant contacts

•Designed to fit applications requiring minimal space

•Combination lamp is suitable for PC requirements on a 45 angle whenusing base mounts

•Available in red or yellow versions

•NEW Combination versions Housing assembly with Light Emitting Diodes

•High impact polycarbonate lens

Technical SpecificationsMaterial: Polycarbonate lens & housingLight Source: Light Emitting Diodes (LEDs)Designed at 14v, .05 ampCombination lamp designed at 14v, .05 amd (red), .1 amp (yellow)

LED Model 19 Base Mount Kits

Part No. TL19006R

LED Model 19 Gray Base Kit, Red

Part No. TL19006Y

LED Model 19 Gray Base Kit, Yellow


396

LED Model 21 Combination Products Rectangular Sealed

Features & Benefits• Features standard & combination lamps

• DiamondShell hard coating available for additional protection

• Innovative optic design allows one lamp the ability to function as two


• Less susceptible to shock & vibration Uses standard mounting holes &accessories



• High impact polycarbonate lens New combination version

• Fit ‘N Forget plug assembly keeps corrosives from lamp

• Housing assembly with light emitting diodes

Technical SpecificationsMaterial: Polycarbonate lens & housing, 16 gauge wireLight Source: Light Emitting Diodes (LEDs), 12v designed at 14v, .05 amp24v designed at 28v, .05 amp, Kit Components: TL21075R/Y kits: (1) - TL21275R/Y combolamp, (1) - TL94862 plug, TL21051R/Y or TL21080R/Y kits: (1) - TL21251R/Y or TL21880R/Ylamp, (1) - TL94862 plug, TL21056R/Y kits: (1) - TL21256R/Y lamp, (1) - TL94862 plug,Recommended Accessories: TL97034 - Mounting Gasket, TL97036 - SealingGasket

Part No. TL21075RLED Combination Kit - Red, 12v

Part No. TL21075YLED Combination Kit - Yellow, 12v

Part No. TL21275YLED Combination Lamp - Yellow, 12v

Model 19, PC Rated, LED SealedFeatures & Benefits• Innovative optic design allows combination lamp the ability to function

as two


• Designed to fit applications requiring minimal space

• Must be mounted horizontally PC rated lamps meet requirements on a45°

Technical SpecificationsMaterial: Polycarbonate lens & housingLight Source: Light Emitting Diodes (LEDs), Designed at 14v, .05 ampPC rated lamp designed at 14v, .05 amp (red), .12 amp (yellow)

Part No. TL19250RLED Lamp - Red

Part No. TL19250YLED Lamp - Yellow


397

LED Model 19 CLEAR Products Rectangular SealedFeatures & Benefits• Unique design combines a clear lens & housing with red or yellow

colored LEDs to create a lamp that graps attention only when lit

• Popular in mounting applications where space is at a premium

• When utilized with the optional chrome base, the effect is a sylishappearance

• Snap lock tabs allow for quick & easy installation


• Draws less current, allowing more power for other vehiclerequirements

• Less susceptible to shock & vibration Direct pin-to-circuit boardsolders assure vibration resistant contacts

• Not suitable for PC requirements

Technical SpecificationsMaterial: Polycarbonate lens & housingLight Source: Light Emitting Diodes (LEDs), Designed at 14v, .05 amp

Part No. TL19251RLED Lamp - Red

Part No. TL19251YLED Lamp - Yellow

LED Model 21 Products Rectangular SealedFeatures & Benefits• Features standard or combination lamps Diamond Shell ard coating

versions available for additional protection

• Innovative optic design allows one lamp to function as two


• Electronics completely sealed in epoxy to resist corrosion




• NEW Combination version High impact polycarbonate lens


• SureSeal plug assembly keeps corrosives from lamp

Technical SpecificationsMaterial: Polycarbonate lens & housing, 16 gauge wire, Light Source: Light Emitting Diodes (LEDs), 12vdesigned at 14v, .05 amp, 24v designed at 28v, .05 amp, Kit Components: TL21075R/Y kits: (1) -TL21275R/Y combo lamp, (1) - TL94862 plug, TL21051R/Y or TL21080R/Y kits: (1) - TL21251R/Y orTL21880R/Y lamp, (1) - TL94862 plug, TL21056R/Y kits: (1) - TL21256R/Y lamp, (1) - TL94862 plug,Recommended Accessories: TL97034 - Mounting Gasket, TL97036 - Sealing Gasket

Part No. TL21251RLED Lamp - Red, 12V

Part No. TL21251YLED Lamp - Yellow, 12V

Part No. TL21051RLED Kit - Red, 12v

Part No. TL21051YLED Kit - Yellow, 12v

Part No. TL19738Gray Base Mount Kits

LED Model 19 Radius Gray Base Mountw/ 6.26" radius.


· Features unique plug-in design forease of installation

· Low profile extra strength base· Suitable for PC requirements on a

45 angle , polycarbonate base.

398

LED Model 30 Products 2" Sealed

Features & Benefits• Electronics completely sealed in epoxy to resist corrosion & moisture

• Sonically sealed lens & housing

• Uses standard mounting holes & accessories Less susceptible toshock & vibration



• Available in 12 or 24 volt versions

• Wide groove PVC grommet

• Flange mount version permanently affixed to sealed lamp SureSealplug keeps corrosives from LED lamp

• High impact polycarbonate lens Housing assembly with Light EmittingDiodes

Technical SpecificationsMaterial: Polycarbonate lens, housing & flange, PVC grommet, 16 gauge wireLight Source: Light Emitting Diodes (LEDs), 12v designed at 14v, .03 amp (red) & .08 amp(yellow), 24v designed at 28v, .05 amps (red) & .10 amp (yellow)Kit Components: TL30050R/Y grommet kits: (1) - TL30250R/Y 12v lamp (1) - TL30700grommet, (1) - TL94862 plug, TL30058R/Y grommet kits: (1) - TL30258R/Y 24v lamp,(1) - TL30700 grommet, (1) - TL94862 plugTL30051R/Y flange kits: (1) - TL30251R/Y 12v lamp & flange, (1) - TL94862 plugRecommended Accessories: TL30705 grommet cover, TL30708 flange cover

Part No. TL30050RLED Grommet Kit - Red, 12v

Part No. TL30050YLED Grommet Kit - Yellow, 12v


Part No. TL30051YLED Grommet Kit - Yellow, 12v

Part No. TL30250RLED Lamp - Red, 12v

Part No. TL30250YLED Lamp - Yellow, 12v

Part No. TL30251RLED Lamp & Flange - Red, 12v

Part No. TL30271RYellow LED Lamp w/ABS logo - 12v

Armored Mount For LED Model 35 Products

Features & Benefits• Extruded aluminum armored mounting bracket protects

individual lamps from physical damage• Wiring routed through .65" access hole in base of mount

Technical SpecificationsMaterial: Aluminum mount

Part No. TL30050R


399

Features & Benefits• Innovative optic design allows one lamp the ability to function as two


• Electronics completely sealed in epoxy to resist corrosion &moisture

• Less susceptible to shock & vibration Draws less current, allowingmore power for other vehicle requirement

• Uses standard mounting holes & accessories NEW Low Profileversion available


• Meets PC requirements on a 45 angle using all mounting devices

• Standard bullet terminal plug



• Wide groove grommet Permanently affixed LED flange mount

Technical Specifications

Material: Polycarbonate lens, housing & flange, PVC grommet, 16 guage wire, Light Source:Light Emitting Diodes (LEDS), Designed at 14v, .1 ampKit Components: TL30075R/Y grommet kits: (1) - TL30275R/Y lamp, (1) - TL30700 grommet,(1) - TL94964 plug, TL30080R/Y flange kits: (1) - TL30279R/Y lamp & flange, (1) - TL60700grommet, (1) - TL94964 plug, Recommended Accessories: TL30705 grommet cover, TL30708flange cover, TL30709 grommet, TL94964 right angle plug

LED Model 30 High Profile PC Rated, 2'’ Sealed

Part No. TL30075RLED Grommet Kit, Red

Part No. TL30075YLED Grommet Kit, Yellow



Part No. TL3027RLED Lamp & Flange, Red

Part No. TL30279YLED Lamp & Flange, Yellow

Mounting Covers For 4'’ Lamps

Features & Benefits• Designed to enhance the appearance of lamps

• Flange cover offers improved theft resistance

• Three screws required

Technical SpecificationsMaterial: Polished Stainless Stee, Black powder coated stainless steelChrome painted plastic

Part No. TL44705Grommet Cover


400

LED Model 35 Products Rectangular Sealed

Features & Benefits• Slim 3/4 “ wide design makes this lamp the perfect solution for lighting

narrow trailer headers

• Uses standard mounting holes on 3 “ centers




• New optional gaskets to improve seal between lamp & body

• Must be mounted horizontally

• Kits include lamp & 94862 plug

• New multi-voltage version

• High impact polycarbonate lens Housing assembly with Light EmittingDiodes

• “Fit ‘N Forget” plug assembly keeps corrosives from lamp

Technical Specifications

Material: Polycarbonate lens & housing, 16 gauge wire, Light Source:Light Emitting Diodes (LEDs), 12v designed at 14v, .03 amp (red) and .08 amp(yellow), 24v designed at 28v, .03 amp (red) and .04 amp (yellow)

Part No. TL35001RLED Kit - Red, 12v

Part No. TL35001YLED Kit - Yellow, 12v

Part No. TL35200RLED Lamp - Red, 12v

Part No. TL35200YLED Lamp - Yellow, 12v

LED Model 35 Aluminum ID BarFeatures & Benefits• Designed to fit applications requiring minimal space

• Features aluminum bar with three LED Model 35 lamps on 6" or 9"centers

• Slim 1" width is perfect for upper rail mounting


• Sonically sealed lens & housing Less susceptible to shock & vibration


• Direct pin-to-pin board solders assure vibration resistant contacts

MATERIAL: Polycarbonate lens & housing, Extruded aluminum bar, 16 gauge wire, LIGHTSOURCE: Light Emitting Diodes(LED), Designed at 14v, .03 amp (red)and .08 amp(yellow),KIT COMPONENTS: TL35740R/Y kits: TL3 - 35200R/Y LED lamps, (1) - TL00815 ID bar w/6" center, (1) - TL96989 wiring harness, TL35741R/Y kits: (3) - TL35200R/Y LED lamps, (1) -TL00816 ID bar w/ 9" center, (1) - TL96996 wiring harnessPart No. TL35740R

Red, kit w/6" centers


401

Part No. TL44001YLED Rear Turn Grommet Kit, Yellow

Part No. TL44021YLED Rear Turn Gray Flange Kit,Yellow

Part No. TL44081YLED Rear Turn Grommet Kit, Yellow

Part No. TL44201YLED Rear Turn Lamp - Yellow

Super 44 Rear Turn, 4'’ Sealed / 42 Diode Pattern

Features & Benefits• New slim housing fits into areas where space is at a premium

• Electronics completey sealed in epoxy to resist corrosion & moisture

• Uses standard Model 40 mounting holes & accessories Less susceptibleto shock & vibration


• SureSeal plug assembly keeps corrosives from lamps

• Permanently affixed LED flange mount version

• Mounting grommet Housing assembly with Light Emitting Diodes


Technical SpecificationsMaterial: Polycarbonate lens, housing & flange, PVC grommet, 16 gauge wireLight Source: Light Emitting Diodes (LEDs), 12v lamp designed at 14v, .5 ampKit Components: TL44001Y & TL44081Y grommets: (1) - TL44201Y or TL44881Y lamps, (1) -TL40700 grommets, (1) - TL94789 adapter plug, TL44201Y & TL44087Y gray flange kits: (1) -TL44221Y or TL44887Y lamp & flange, (1) - TL94789 adapter plug, TL44027Y & TL44088Yblack flange kits: (1) - TL44227Y or TL44888Y lamp & flange, (1) - TL94789 adapter plug,Recommended Accessories: TL44705 flange cover, TL40705 grommet cover

LED Super 44 F/P/T Products 4'’ Sealed

Features & Benefits• New slim housing fits into areas where space is at a premium






• Mounting grommet High impact polycarbonate lens

• Housing assembly Light Emitting Diodes

• Fit ‘N Forget plug assembly keeps corrosives from lamps

Technical SpecificationsMaterial: Polycarbonate lens, housing & flange, PVC grommet, 16 gauge wireLight Source: Light Emitting Diodes (LEDs), Designed at 14v, .01/.75 ampKit Components: TL44024Y & TL44078Y black flange: (1) - TL44224Y or TL 44878Y lamp &flange (1) - TL94706 adapter plug, TL44023Y & TL44077Y gray flange: (1) - TL44223Y orTL44877Y lamp & flange, (1) - TL94706 adapter plugTL44003Y & TL44071Y grommets: (1) - TL44203Y or TL44871Y lamp, (1) - TL40700grommet, TL1 - 94706 adapter plug

Part No. TL44003YGrommet Kit, Yellow

Part No. TL44203YLamp, Yellow


402

Features & Benefits• Most advanced & cost effective LED S/T/T lamp on the market

• Utilizes cold clinching joining process for a more reliable & robust product

• Snap LED array dissipates heat more effectively, resulting in greater lightoutput

• Advanced optics design creates a greater dispersion of light




• New, permanently affixed reinforced flange mount version

• High impact polycarbonate lens Mounting grommet

• Fit ‘N Forget plug assembly keeps corrosives away from LED lamps

Technical SpecificationsMaterial: Polycarbonate lens, housing & flange, PVC grommet, 16 gauge wireLight Source: Light Emitting Diodes (LEDs), Designed at 14v, .03/.3 ampKit Components: TL44036R & TL;44096R black flange: (1) - TL44326R or TL44986R lamp &flange, (1) - 94706 adapter plug, TL44032R & TL44093R gray flange: (1) - TL44322R orTL44983R lamp & flange, (1) - TL94706 adapter plug44038R &44098R white flange: (1) - TL44328R or TL44988R lamp & flange(1) - TL94706 adapter plug, TL44030R & TL44092R grommets: (1) - TL44302R or TL44982Rlamp, (1) - TL40700 grommet, (1) - TL94706 adapter plug

LED Super 44 S/T/T Products 4'’ Sealed

Features & BenefitsNew slim housing fits into areas where space is at a premium

Electronics completely sealed in epoxy to resist corrosion & moisture

Uses standard mounting holes & accessories

Draws less current, allowing more power for other vehicle requirements

Direct pin-to-circuit board soldering assures solid, water tight contacts

Sealed polycarbonate lens & housing design evenly distributes light for full &powerful illumination pattern

Fit ‘N Forget plug assembly keeps corrosives from lamp Permanently affixed LEDflange mount version

Technical SpecificationsMaterial: Polycarbonate lens, housing & flange, 16 gauge wire,Light Source: Light Emitting Diodes (LEDs), Designed at 13.5v, .5 ampKit Components: TL44042C grommet kit: (1) - TL44207C lamp, (1) - TL40700 grommet, (1) -TL94789 plug, TL44046C flange kit: (1) - TL44237C lamp & flange(1) - 94789 adapter plug, Recommended Accessories: TL44705 flange cover, TL40705 grommetcover

Part No. TL44046CLED Model 44 Flange Kit, White

LED Model 44 Products 4” Sealed


Part No. TL44022RRed, SST flange mount lamp kitPart No. TL44030RLED Grommet Kit, Red

Part No. TL44032RLED Gray Flange Kit, Red

Part No. TL44036RLED Black Flange Kit, Red

Part No. TL44092RLED Grommet Kit, RedPart No. TL44222RRed, lamp and flange mount onlyPart No. TL44302RLED Lamp, Red

Part No. TL44322RLED Lamp & Gray Flange, Red

403

LED Model 45 Products Sealed

Features & Benefits• DiamondShell hardcoat versions available for additional protection





• Mounting grommet Housing assembly with Light Emitting Diodes


• Standard connector makes retrofitting a snap Hard wired designeliminates pin corrosion

Technical SpecificationsMaterial: Polycarbonate lens, housing & flange, PVC grommet, 18 gauge wireLight Source: Light Emitting Diodes (LEDs), 12v designed at 14v, .5 amp (stop), .08 amp (tail), .7amp (turn), 24 designed at 28v, .2 amp (stop), .05 amp (tail), .5 amp (turn)Kit Components: TL45052R/TL45062R 12v grommet kits: (1) - TL45252R or TL45262R hard wiredlamp, (1) - TL45700 grommet, TL45054R/TL45064R 24v grommet kits: (1) - TL45254R or TL45264Rhard wired lamp(1) - TL45700 grommet, Recommended Accessories: TL45720 flanged mounting bracketTL45721 mounting bracket


Features & Benefits·Grommet cover features polished stainless steel to enhance appearance of lamps·Flange cover provides improved theft resistance of LED

lamps

Technical SpecificationsMaterial: Polished stainless steel

Mounting Covers For 60 Series Mounts

Part No. TL60719Flange cover, 5/carton

Model 60 LED 60 Series Mounting Flange Model

Part No. TL60750Model 60 LED Mounting Flange


404

LED Model 60 S/T/T & F/P/T Products Oval SealedFeatures & Benefits• World’s first SingLEDiode S/T/T

• Lamp meets regulations using only 1 LED

• Creates homogenous glow, never before seen in an LED lamp

• DiamondShell hardcoat versions for additional protection


• Electronics completely sealed in epoxy to resist corrosion &moisture


• Flange mount version Wide groove grommet


• Fit ‘N Forget plug assembly keeps corrosives away from LEDlamps

• Non metalized reflector High impact polycarbonate lens

Technical SpecificationsMaterial: Polycarbonate lens & housing, ABS flangePVC grommet, 16 gauge wir, LightSource: Light Emitting Diodes (LEDs), Designed at 14v, .3 amp (stop), .1 amp (tail), .5 amp(turn), Kit Components: TL60050R/TL60094Y grommet kits: (1) - TL60250R or TL60290Ylamp, (1) - TL60700 grommet, (1) - TL94706 adapter plug, TL60085R grommet kit: (1) -TL60885R lamp, (1) - TL60700 grommet, (1) - TL94706 adapter plug, TL60056R/TL60097Yblack flange kits:(1) - TL60256R or TL60292Y lamp & flange, (1) - TL94706 adapter plugTL60052R/TL60096Y gray flange kits: (1) - TL60252R or TL60291Y lamp & flange, (1) -TL94706 adapter plug, Recommended Accessories: TL60719 flange cover, TL60721grommet cover

Part No. TL60050RGrommet Kit, Red

LED Super 60 Auxiliary/Turn Products 6" Sealed

Part No. TL60072YLED Gray Flange MountKit, Yellow

Part No. TL60075YLED Grommet Mount Kit,Yellow

Part No. TL60080YLED Grommet Mount Kit,Yellow, seq. Arrow kit


Part No. TL60280YLED Lamp, Yellow, seq.arrow

Features & Benefits• DiamondShell hardcoat version for additional protection



• Vibration sealed lens & housing

• High impact polycarbonate lens Mounting grommet



Technical SpecificationsMaterial: Polycarbonate & housing, ABS flange, PVC grommet, 16 gauge wireLight Source: Light Emitting Diodes (LEDs), 12v lamp designed at 14v, .42 amp12v sequential arrow designed at 14v, .3 amp, Kit Components: TL60075Y & TL60080Ygrommet kits: (1) - TL60275Y or TL60280Y lamp (1) - TL60700 grommet(1) - TL94789 adapter plug, TL60072Y & TL60082Y gray flange kits: (1) - TL60272Y orTL60282Y lamp & flange, (1) - TL94789 adapter plug, Recommended Accessories:TL60719 flange cover, TL60721 grommet cover


405

LED Model 60 S/T/T & F/P/T Products Oval Sealed

Features & Benefits• World’s first SingLEDiode S/T/T

• Lamp meets regulations using only 1 LED

• Creates homogenous glow, never before seen in an LED lamp


• Sonically sealed lens & housing Electronics completely sealed in epoxy toresist corrosion & moisture


• Flange mount version Wide groove grommet



• Non metalized reflector High impact polycarbonate lens

Technical SpecificationsMaterial: Polycarbonate lens & housing, ABS flangePVC grommet, 16 gauge wireLight Source: Light Emitting Diodes (LEDs), Designed at 14v, .3 amp (stop), .1 amp (tail), .5 amp(turn), Kit Components: TL60050R/TL60094Y grommet kits: (1) - TL60250R or TL60290Y lamp,(1) - TL60700 grommet, (1) - TL94706 adapter plug, TL60085R grommet kit: (1) - 60885R lamp, (1)- 60700 grommet, (1) - TL94706 adapter plug, TL60056R/TL60097Y black flange kits:(1) - TL60256R or TL60292Y lamp & flange, (1) - TL94706 adapter plug, TL60052R/TL60096Ygray flange kits: (1) - TL60252R or TL60291Y lamp & flange, (1) - TL94706 adapter plugRecommended Accessories: TL60719 flange cover, TL60721 grommet cover

Features & Benefits• Sonically sealed lens & housing






• Mounting grommet New flange mount version

• Not recommended for stop or turn applications

Technical SpecificationsMaterial: Polycarbonate lens, housing & flange, PVC grommet, 16 gauge wireLight Source: Light Emitting Diodes (LEDs), Designed at 14v, .35 ampKit Components: TL60061R grommet kit: (1) - TL60260R lamp, (1) - TL60700grommet, (1) - TL94789 adapter plug, TL60062R & TL60037R gray flange kit:(1) - TL60262R or TL60267R lamp & flange, (1) - TL94789 adapter plugRecommended Accessories: TL60719 flange cover, TL60721 grommet cover

Part No. TL60260RLED Model 60 Lamp 12v, Red

LED Model 60 CHMSL Products 6'’ Sealed


Part No. TL60075YGrommet Kit, YellowPart No. TL60094YGrommet Kit, Yellow


Part No. TL60252RLED Lamp & Gray Flange, Red


406

Super 60 LED Side Turn Signal Lamp

Features & Benefits• Surpasses SAE J2039 standards for Side Turn

Signal lamps in large vehicle applications• Exceeds DOT and SAE standards for Side Marker

application• Mounts at mid-point of trailer or where needed

on tractor• Created using Advanced Optics Design (AOD)

software, to produce maximum light dispersion• Lamp life rated at 100,000 hours• Low amperage draw for fewer wiring and

alternator problems.• Instantaneous glow time, 0.2 seconds faster

than incandescent lamps.• Superior resistance to shock and vibration• Lamp can be mounted on either side of vehicle

Technical SpecificationsMaterial: Polycarbonate lens & housingLight Source: Light Emitting Diodes (LED’s), Designed at 13.5volts, Turn: .5 amps; Marker: .05 amps,Recommended Accessories: TL60700 Grommet, TL60721 Decora-tive Grommet Cover, TL60719 Stainless Steel Flange Cover,TL94706 LED Fit ‘N Forget/PL-3, adapter, TL94707 LED Fit ‘NForget connector

Part No. TL60315YSuper 60 Series LED Side Turn Lamp

SingLEDiode Super 66 LED S/T/T Lamp

Features & Benefits• World’s first One Diode S/T/T Lamp meets regulations while creating ahomogenous glow never before seen in an LED lamp


• High impact polycarbonate lens and housing are sonically sealed


• All Truck-Lite LED lamps are less susceptible to shock & vibration

• Flange mount version utlizes reinforced mounting holes


Technical SpecificationsMaterial: Polycarbonate lens & housing, PVC grommet, 16 gauge wireLight Source: Light Emitting Diodes (LEDs), Designed at 13.5v, .35 amp (stop/turn), .03 amp (tail)Kit Components: 66050R grommet kit: (1) - TL66250R lamp, (1) - TL60700 grommet, (1) - TL94706 adapterplug, TL66085R grommet kit: (1) - TL66885R lamp, (1) - TL60700 grommet (1) - TL94706 adapter plug,TL66056R black flange kit: (1) - TL66256R lamp & flange, (1) - TL94706 adapter plug, TL66054R gray flangekit: (1) - TL66254R lamp & flange, (1) - TL94706 adapter plug, TL66052R gray flange kit: (1) - TL 66252R lamp& flange, (1) - TL94706 adapter plug, TL66082R gray flange kit: (1) - TL66882R lamp & flange, (1) - TL94706adapter plug, Recommended Accessories: TL60719 flange cover, TL60721 grommet cover, TL60700 grommet,TL94706 adapter plug, TL94706 plug assembly

Part No. TL66250RSuper 66 SingLEDiode S/T/T Lamp


407

LED Fit ‘N Forget Stop/Turn/Tail PlugFeatures & Benefits• Keeps water, salt & other corrosives from LED lamps

• Combine with LED lamps for Lifetime Lighting Warranty eligibility

• 16 gauge GPT wire

• Tin plated brass terminals

Technical SpecificationsGround - 8" - #10 ring terminal - WhiteTail - 8" - 6/32" wire strip - BlackStop/Turn - 8" - 6/32" wire strip - Red

LED Fit ‘N Forget Marker Clearance PlugsFeatures & Benefits• Keeps water, salt & other corrosives from LED lamps




Technical SpecificationsPart#s: TL94624, Ground -11.5" - P/E connector #120109 - WhiteM/C - 11.5" - P/E connector #120109 - Black, TL94861, Ground - 4.5" - #6 ring terminal - White,M/C - 5" - Heat shrink butt splice - Black, TL94862Ground - 4.5" - #6 ring terminal - White, M/C - 5" - .180 molded bullet - BlackTL94718, Ground - 4.5" - #10 ring terminal - White, M/C - 5" - .180 molded bullet - Black,TL94888, Ground - 4.5" - #6 ring terminal - White, M/C - 5" - .156 molded bullet - Black,TL94742, Ground - 4.5" - .156 shunt device - White, M/C - 5" - .156 shunt device - Black,TL95410, Ground - 5" - .180 molded bullet - White, M/C - 5" - .180 molded bullet - Black,TL97005, Ground - 5" - .180 molded bullet - White, M/C - 5" - .180 molded bullet - Black,TL94736, Ground - 12" - .180 molded bullet - White, M/C - 12" - .180 molded bullet - Black,TL95306, Ground - 20" - .180 molded bullet - White, M/C - 20" - .180 molded bullet - Black,TL97006, Ground - 4.5" - Heat shrink butt splice - White, M/C - 5" - Heat shrink butt splice - Black

Part No. TL94707Stop/Turn/Tail Plug

LED Fit ‘N Forget Stop/Turn Plug Features & Benefits• Keeps water, salt & other corrosives from LED lamps




Technical SpecificationsGround - 8" - #6 ring terminal - WhiteStop/Turn - 8" - 12/32" wire strip - Red

Part No. TL94759Stop/Turn Plug


Features & Benefits• This system fits every application including retro-fitting & tank truck/trailers• Design is centered around an eight outlet junction box with liquid tight compression fittings• Three part fittings have a PVC grommet available in six different hole sizes to accomodate various cables• Eight position terminal block provides a robust electrical connectionTechnical SpecificationsMaterial: PVC jacket cable, 2 conductor round cable

Part No. TL50302Upper Market & IdentificationHarrness, brown/ white

Upper Marker & ID Harness

Part No. TL94718

408

Features & Benefits• Keeps water, salt & other corrosives from LED lamps

• Combine with LED lamps for Lifetime Lighting

• Warranty eligibility 16 gauge GPT wire


Technical SpecificationsConverts one S/T/T plug into LED Fit ‘N Forget S/T/T plugGround - 8" - WhiteTail - 8" - BlackStop/Turn - 8" - Red

LED Fit ‘N Forget S/T/T & Adapter Plugs

LED Fit ‘N Forget Marker Clearance Plugs

Features & Benefits· Keeps water, salt & other corrosives from LED lamps

· Combine with LED lamps for Lifetime Lighting Warranty elgibility

· 16 gauge GPT wire

· Tin plated brass terminals

Technical SpecificationsGround - 4.5" - #6 ring terminal - WhiteM/C - 5" - .180 molded bullet - Black

Part No. TL94862


Part No. TL94706

Part No. TL94706

Part No. TL94768

Part No. TL94769

Part No. TL95399

Part No. TL95002

Documents

Truck-Lite LED Lighting Source: Light Emitting Diodes (LEDs), 12v designed at 13.5v, .05 amp 24v designed at 28v, .03 amp LED Model 15 Product Rectangular Sealed Features & Benefits