Tropos Part Number 200230-00, Rev A0 1

The downward antenna bracket kit is used to mount downward facing antennas for the Tropos 5210 and 5320 series routers.

Follow these instructions to install the bracket kit. For complete Tropos router installation instructions, see the Tropos 5210 Series MetroMesh Router Installation Guide or the Tropos 5320 Series MetroMesh Router Installation Guide.

trp_187

2

1

3

4

1. Align the antenna bracket with the four protruding screw holes that are on the bottom of the router.

2. Use four #10-32 hex screws to attach the bracket to the router.– If you have

installed the bottom shell for solar load protection, use the 1/2-inch screws.

– If you have not installed the bottom shell kit, use the 3/8-inch screws.

3. Attach the antenna extension cables to the antenna ports on the top of the router.

4. Attach the antennas to the connectors on the bottom of the bracket.

Tropos 5210 and 5320 Series RoutersInstallation Instructions for the Downward Antenna Bracket Kit