Design ● Manufacture ● Install

Trolley Hoists

4-5 4-5

Copyright J.Barnsley Cranes LTD, 2017. Reproduction, including extracts, only with written permission from the publisher. No liability assumed for errors.

CONTENTS

> Manual Trolley HoistsHook Suspension Chain Hoists & Hand Geared Trolleys 4-6Combined Low Headroom Spark-proof Trolley Hoists 7-8Ultra-Low Headroom Spark-Proof Trolley Hoists 9-10

> Pneumatic Trolley HoistsStandard Headroom Pneumatic Trolley Hoists 12-13Low Headroom Pneumatic Trolley Hoists 14-15Ultra-Low Headroom Pneumatic Trolley Hoists 16-17Rack & Pinion Pneumatic Trolley Hoists 18-19

> Electric Trolley HoistsElectric Wire Rope Hoists 21-24Electric Chain Hoists 25-27

www.jbarnsleycranes.com

Hook SuspensionChain Hoists and

Hand Geared Trolleys

Ultra Low HeadroomSpark-Proof Hoists

Low Headroom Spark-Proof Trolley Hoists

> Manual Trolley Hoists

Hook Suspension Chain Hoists &Hand Geared Trolleys (YHSY)

Designed according to:BS EN 13157 & BS 3243 Supply of Machinery (Safety) Regulations, 1992 (S.I. 1992/3073) ATEX Directive 214/34/EU

Hoisting/lowering:Manually operated by endless pendant Brass hand chain

Travelling:Manually operated by endless pendant Brass hand chain

Environment: Hazardous Area Zone 1 & 2. IIA/IIB T3. ATEX.

Safety Features: Overload protection deviceStainless Steel Slack Chain Collector

Load Chain: Material-Grade ’T’ High Tensile steelAccording to DIN EN 818-7 (ASTM A391/A391M-07)

Spark Resistant Materials: Brass hand chains• Bronze trolley wheels• Bronze load chain sprocket• Bronze Idler chain Rollers• Bronze Brake Ratchet Wheel• Bronze Brake Hub (8 Start Threaded Nut)• Bronze Coated High Tensile, Forged Steel, • Hook and safety catch

Anti Corrosion Protection:Load chain Galvanised• Galvanised Cast Steel Hand Chain wheels• Galvanised Hand Chain Guide• Galvanised Stay Bars, Washers & Nuts• Zinc Plated Fasteners.•

Surface Treatment:3 Coat Epoxy Marine Painting System• Type: OSPS-1• Shot blast to SA 2.5• Total DFT: 220 • Colour: 08E51 Golden Yellow•

SWL (Te) A(Min) B C D E F G FALLS EFFORT TO

HOIST (Kgs)VELOCITY

RATE0.5 335 175 157 242 87 70 29 1 25 49:1

1 335 175 157 242 87 70 29 1 30 49:1

2 520 250 204 335 109 95 40 1 33 87:1

3 520 250 204 335 109 95 40 1 38 87:1

5 654 250 204 352 109 95 47 2 34 174:1

8 825 383 204 436 109 95 68 3 35 261:1

10 825 383 204 436 109 396 68 3 44 261:1

20 1010 555 250 501 125 1012 64 6 2 * 44 522:1NOTE: ‘A’ dimension increases on low temparature models

SWL (Te) Weight (3m HOL)

Extra per meter over 3m HOL

0.5 16 1.81 16 1.82 33 3.13 33 3.15 43 5.38 79 7.510 79 7.520 208 15

Hand Geared Trolleys (HGT)

SWL(Te) A B C D E F G H J K L M N P WT (KGS)

0.5 50 150 16 195 8 65 22 140 70 13 35 80 300 15 201 60 160 12 195 10 80 27 160 85 23 45 90 340 15 322 70 160 12 195 15 80 32 160 85 30 60 90 340 15 353 85 185 13 195 15 100 32 192 107 30 60 106 404 15 504 100 195 13 195 15 100 32 192 107 40 80 106 404 15 905 100 195 14 195 20 125 32 228 132 40 80 128 484 15 906 100 195 14 195 20 125 32 228 132 40 80 128 484 15 908 100 195 14 195 30 125 32 228 132 40 100 128 484 15 120

10 125 230 17 320 30 160 40 288 165 55 100 177 642 40 18012 125 230 17 320 30 160 40 288 165 65 120 177 642 40 18016 125 230 17 320 40 160 40 288 165 65 120 177 642 40 32020 150 230 34 380 40 200 45 344 200 65 120 204 752 40 320

SWL (t)

Weight (KGS)3m HOL

Extra (KGS) per mover 3m HOL

Effortto Hoist Velocity Effort to

travelVelocity

RatioMinimum

Track Radius

0.5 37 2 25 49:1 5 3.7:1 900

1 37 2 30 49:1 7 3.7:1 900

2 88 4 33 87:1 10 4.3:1 1500

3 88 4 38 87:1 12 4.3:1 1500

5 142 6 34 174:1 15 5.0:1 2000

10 186 8 44 261:1 20 4.6:1 1800

20 565 16 2 *44 522:1 25 7.2:1 7500

Flange Widths available;SWL (Te) mm0.5 / 1 / 2 75 - 3053 / 4 90 - 3055 / 6 / 8 / 10 / 12 100 - 30516 / 20 125 - 305Note: Trolleys set to suit at factory. Please specify beam size with order.

Combined Low Headroom Spark-ProofTrolley Hoists (YCLHY)

SWL(Te) A B C D E F G H J K L M N P WT (KGS)

0.5 50 150 16 195 8 65 22 140 70 13 35 80 300 15 201 60 160 12 195 10 80 27 160 85 23 45 90 340 15 322 70 160 12 195 15 80 32 160 85 30 60 90 340 15 353 85 185 13 195 15 100 32 192 107 30 60 106 404 15 504 100 195 13 195 15 100 32 192 107 40 80 106 404 15 905 100 195 14 195 20 125 32 228 132 40 80 128 484 15 906 100 195 14 195 20 125 32 228 132 40 80 128 484 15 908 100 195 14 195 30 125 32 228 132 40 100 128 484 15 120

10 125 230 17 320 30 160 40 288 165 55 100 177 642 40 18012 125 230 17 320 30 160 40 288 165 65 120 177 642 40 18016 125 230 17 320 40 160 40 288 165 65 120 177 642 40 32020 150 230 34 380 40 200 45 344 200 65 120 204 752 40 320

SWL (t)

Weight (KGS)3m HOL

Extra (KGS) per mover 3m HOL

Effortto Hoist Velocity Effort to

travelVelocity

RatioMinimum

Track Radius

0.5 37 2 25 49:1 5 3.7:1 900

1 37 2 30 49:1 7 3.7:1 900

2 88 4 33 87:1 10 4.3:1 1500

3 88 4 38 87:1 12 4.3:1 1500

5 142 6 34 174:1 15 5.0:1 2000

10 186 8 44 261:1 20 4.6:1 1800

20 565 16 2 *44 522:1 25 7.2:1 7500

SWL (t) A(Min) B C D E F G H J K L M FALLS

0.5 310 130 345 153 192 110 205 MAX 77 92 60 24 29 11 310 130 345 153 192 110 205 MAX 77 92 60 24 29 12 400 180 480 207 273 112 220 MAX 132 107 112 32 40 13 400 180 480 207 273 112 220 MAX 132 107 112 32 40 15 550 209 560 260 300 117 242 148 150 125 30 47 210 784 200 465 187 278 158 270 169 113 150 55 68 320 1400 344 752 376 376 146 380 240 295 200 45 64 6

SWL (T)

Effortto Hoist

(kgs)

Hoisting Velocity

Ratio

Effort to travel (kgs)

Travel Velocity

Ratio

Minimum Track

Radius (mm)

Total No. of Falls

Weight (KGS)3M HOL+/M

1 17 174 14 15:1 2500 2 85+5/M2 19 174 16 15:1 2500 2 90+5/M3 21 326 18 18:9 4000 2 140+7/M4 23 326 20 18:9 4000 2 165+7/M5 25 326 17 14:9 4500 2 195+7/M6 25 653 19 14:9 4500 4 230+11/M8 27 653 21 14:9 5000 4 190+11/M

10 29 653 23 17:8 6500 4 370+11/M12 35 979 26 17:8 6500 6 445+16/M16 45 1305 30 17:8 8000 8 625+2-/M20 48 1305 35 14 8000 8 700+20/M

Ultra-Low Headroom Spark-Proof Trolley Hoists (YLHY)

SWL (T)

Effortto Hoist

(kgs)

Hoisting Velocity

Ratio

Effort to travel (kgs)

Travel Velocity

Ratio

Minimum Track

Radius (mm)

Total No. of Falls

Weight (KGS)3M HOL+/M

1 17 174 14 15:1 2500 2 85+5/M2 19 174 16 15:1 2500 2 90+5/M3 21 326 18 18:9 4000 2 140+7/M4 23 326 20 18:9 4000 2 165+7/M5 25 326 17 14:9 4500 2 195+7/M6 25 653 19 14:9 4500 4 230+11/M8 27 653 21 14:9 5000 4 190+11/M

10 29 653 23 17:8 6500 4 370+11/M12 35 979 26 17:8 6500 6 445+16/M16 45 1305 30 17:8 8000 8 625+2-/M20 48 1305 35 14 8000 8 700+20/M

SWL(T) A B C D E F G H J K L M N FALLS

(per side)1 155 100 80 570 320 100 150 260 310 200 150 25 100 12 190 100 80 570 320 100 150 260 310 200 150 25 100 13 220 123 100 780 510 130 140 365 415 250 170 35 100 14 240 123 100 780 510 130 140 365 415 250 170 35 100 15 280 153 125 815 510 165 140 400 415 260 170 35 100 16 305 153 125 815 490 165 160 410 405 260 180 35 100 28 345 153 125 880 530 210 140 475 405 260 180 35 100 2

10 370 192 160 900 530 195 175 460 440 270 190 35 100 212 525 192 160 905 480 210 215 440 465 290 220 35 100 316 560 192 160 1105 670 235 200 570 535 300 230 35 100 420 590 240 200 1105 670 235 200 570 535 350 240 35 100 4

> Pneumatic Trolley Hoists

Standard HeadroomPneumatic Trolley Hoists

Low HeadroomPneumatic Trolley Hoists

Ultra Low HeadroomPneumatic Trolley Hoists

Rack & PinionPneumatic Trolley Hoists

SWL(T) A B C D E F G H J K L M N FALLS

(per side)1 155 100 80 570 320 100 150 260 310 200 150 25 100 12 190 100 80 570 320 100 150 260 310 200 150 25 100 13 220 123 100 780 510 130 140 365 415 250 170 35 100 14 240 123 100 780 510 130 140 365 415 250 170 35 100 15 280 153 125 815 510 165 140 400 415 260 170 35 100 16 305 153 125 815 490 165 160 410 405 260 180 35 100 28 345 153 125 880 530 210 140 475 405 260 180 35 100 2

10 370 192 160 900 530 195 175 460 440 270 190 35 100 212 525 192 160 905 480 210 215 440 465 290 220 35 100 316 560 192 160 1105 670 235 200 570 535 300 230 35 100 420 590 240 200 1105 670 235 200 570 535 350 240 35 100 4

SWL(T) MODEL FALLS AIR FLOW

(L/SEC)

FULL LOAD LIFTING

SPEED (M/MIN)

MINIMUM HOSE DIA (I/D)

0.25 TCR-250 1 13 15 9.3 0.5”

0.25/0.5 TCR-500 1 25 27 12/10.5 0.5”

0.5 TCR-500/2 2 13 15 4.6 0.5”

0.5 TCS-500 1 28 33 17 0.5”

0.98 TCS-980 2 28 33 8.5 0.5”

1 TCR 1000/2 2 25 27 5.3 0.5”

1 TCR-1000 1 25 28 6 0.5”

2 TCR-2000/2 22 25 30 3 0.5”

3 TCR-3000 1 33 43 2.8 0.75”

6 TCR-6000/2 2 33 43 1.4 0.75”

9 TCR-9000 3 33 43 0.9 0.75”

10 TNC 10TW LFE 2 90 100 1.5 1

12 TCR-12000/4 4 33 43 0.6 0.75”

15 TCR-15000/5 5 33 43 0.5 0.75”

15 TNC 15TW/3 3 90 100 1 1”

20 TNC 20TW/4 4 90 100 0.75 1”

25 TNC 25TW LPE 2 90 100 0.6 1”

37.5 TNC 37.5TW/3 3 90 100 0.35 1”

50 TNC 50TW/4 4 90 100 0.3 1”

Standard Headroom Pneumatic Trolley Hoists

As standard, our hoists are able to work within a temperature range of -10°C to +70°C, with some slight modifications we can make the hoists suitable to be used at -20°C.

SWL(T) MODEL FALLS AIR FLOW

(L/SEC)

FULL LOAD LIFTING

SPEED (M/MIN)

MINIMUM HOSE DIA (I/D)

0.25 TCR-250 1 13 15 9.3 0.5”

0.25/0.5 TCR-500 1 25 27 12/10.5 0.5”

0.5 TCR-500/2 2 13 15 4.6 0.5”

0.5 TCS-500 1 28 33 17 0.5”

0.98 TCS-980 2 28 33 8.5 0.5”

1 TCR 1000/2 2 25 27 5.3 0.5”

1 TCR-1000 1 25 28 6 0.5”

2 TCR-2000/2 22 25 30 3 0.5”

3 TCR-3000 1 33 43 2.8 0.75”

6 TCR-6000/2 2 33 43 1.4 0.75”

9 TCR-9000 3 33 43 0.9 0.75”

10 TNC 10TW LFE 2 90 100 1.5 1

12 TCR-12000/4 4 33 43 0.6 0.75”

15 TCR-15000/5 5 33 43 0.5 0.75”

15 TNC 15TW/3 3 90 100 1 1”

20 TNC 20TW/4 4 90 100 0.75 1”

25 TNC 25TW LPE 2 90 100 0.6 1”

37.5 TNC 37.5TW/3 3 90 100 0.35 1”

50 TNC 50TW/4 4 90 100 0.3 1”

Our pneumatic hoists have safe working loads ranging from 250kg to 50 tonne and conform with the EC Machinery Directive and the European Standard for hoists BS EN 14492-2.

The TCR, TCS and TNC series of pneumatic hoists offers a comprehensive range of hoists suited to all types of industrial and marine environments. For use in areas where there is a risk of explosion due to flammable gases or dust, we can offer a range of ATEX classifications to suit your requirements.

TOKU high quality vane motor and epicycle gearbox with long life grease• Overload protection• High strength cast steel housing for durability• Compact and lightweight for easy handling• Extended duty cycles and frequent reversals• Variable speed for raising and lowering accurately• Alloy steel hooks with safety catches (Bottom hook fitted with thrust bearing for easy operation)• Automatic adjustable load limiter capacities (Not for TMM, TCR Mini or TCS)• Failsafe automatic disk brake (fully enclosed) ensures the load cannot fall if power is lost• Emergency stop• Mechanical upper and lower hoist limits• Lifting heights to meet your needs• Choice of cord, pendant control or control systems• Low noise level down to 80 dB (Silencer and filter easily changed)• Low air consumption (TCR model)• Air pressure from 4.5 to 6 Bar (7 Bar maximum)• Durable in harsh environments• Self cooling air motor with the exhaust over the motor• Low maintenance• Easily available spares at a realistic price• Hoist body manufactured in Japan, all other parts in Europe• High quality calibrated load chain of European/Japanese manufacture with 5:1 FOS• High speed (TCS model)• Special designs of hoists and trolleys• Ex classification to EC directive 94/9/EC (ATEX models)• Various paint specifications and colours•

DESIGN FEATURES

AVAILABLE OPTIONS

Marine specification• Collision bumpers•

ATEX specification ZONE 1 & 2• Articulated trolleys• Rack & pinion drive•

Travel limits• Air Service units• Festoon systems•

Radio control remote• Main air shut off valve• Special paint systems•

Beam brake• Other travel speeds•

Low Headroom Pneumatic Trolley Hoists

MODELTCR-500-LHR

TCR-1000/2-

LHR

TCR-1000-LHR

TCR-2000-LHR

TCR-3000-LHR

TCR-6000-LHR

TCR-12000-LHR

WLL (Kgs) 500 1000 1000 2000 3000 6000 12000

Chain Falls 1 2 1 2 1 2 4

Lifting Speed Full Load (M/min) 10.5 5.3 6 3 2.8 1.4 0.6

Lifting Speed without Full Load (M/min) 16 9.5 11.3 5.7 5.7 2.9 1.4

Lowering Speed Full Load(M/min) 17.9 9 10.3 5.2 4.6 2.3 1.1

Travel Speed (M/min) 9 9 9 9 6 6 8

Hoist Air Consumption (L/sec) 25 25 25 25 33 33 33

Travel Air Consumption(L/Sec) 25 25 25 25 25 25 50

Inlet Connection (Inches) 0.5 0.5 0.5 0.5 0.75 0.75 1

Weight with 3M HOL (Kgs) 85 90 90 105 295 310 400

Additional Metre HOL (Kgs) 0.8 1.6 1.1 2.2 2.7 5.4 10.8

Flange Minimum (mm) 60 60 60 60 110 110 110

Flange Maximum (mm) 300 300 300 300 300 300 300

MODELTCR-500-LHR

TCR-1000/2-

LHR

TCR-1000-LHR

TCR-2000-LHR

TCR-3000-LHR

TCR-6000-LHR

TCR-12000-LHR

WLL (Kgs) 500 1000 1000 2000 3000 6000 12000

Chain Falls 1 2 1 2 1 2 4

Lifting Speed Full Load (M/min) 10.5 5.3 6 3 2.8 1.4 0.6

Lifting Speed without Full Load (M/min) 16 9.5 11.3 5.7 5.7 2.9 1.4

Lowering Speed Full Load(M/min) 17.9 9 10.3 5.2 4.6 2.3 1.1

Travel Speed (M/min) 9 9 9 9 6 6 8

Hoist Air Consumption (L/sec) 25 25 25 25 33 33 33

Travel Air Consumption(L/Sec) 25 25 25 25 25 25 50

Inlet Connection (Inches) 0.5 0.5 0.5 0.5 0.75 0.75 1

Weight with 3M HOL (Kgs) 85 90 90 105 295 310 400

Additional Metre HOL (Kgs) 0.8 1.6 1.1 2.2 2.7 5.4 10.8

Flange Minimum (mm) 60 60 60 60 110 110 110

Flange Maximum (mm) 300 300 300 300 300 300 300

MODEL A B C D E F G HØ I J KTCR-500-LHR 570 520 115 340 21 TBC 135 70 30 480 590TCR-1000/2-LHR 570 520 115 340 21 TBC 135 70 30 480 590TCR-1000-LHR 570 520 115 340 21 TBC 135 70 30 480 590TCR-2000-LHR 570 520 115 340 21 TBC 135 70 30 480 590TCR-3000-LHR 880 830 132.5 565 33 TBC 115 150 35 675 790TCR-6000-LHR 880 830 132.5 565 33 TBC 115 150 35 675 790TCR-12000-LHR 1050 1000 132.5 735 33 TBC 185 150 50 635 810

MODEL L M N O P Q R Ø S T UTCR-500-LHR 340 180 25 20 295 30 40 186 156 30TCR-1000/2-LHR 375 135 25 42 320 30 40 186 156 30TCR-1000-LHR 340 180 25 20 296 29 40 177 157 30TCR-2000-LHR 390 125 30 53 320 28 40 175 160 40TCR-3000-LHR 400 215 37 38.5 480 37 50 202 230 47TCR-6000-LHR 495 138 37 72 525 43 62 202 230 49TCR-12000-LHR 600 95 52 200 605 58 84 202 230 67

Ultra-Low Headroom Pneumatic Trolley Hoists

AVAILABLE OPTIONS:

Marine specification• Collision bumpers•

ATEX specification ZONE 1 & 2• Articulated trolleys• Rack & pinion drive•

Travel limits• Air Service units• Festoon systems•

Radio control remote• Main air shut off valve• Special paint systems•

Beam brake• Other travel speeds•

*Design can be modified to suit smaller flange sizesMODEL TCR-6000-ULHR TCR-12000-ULHR TCR-20000-ULHR

WLL 6000kg 12000kg 20000kg

Chain Falls 2 4 4

Lifting Speed Full Load (M/Min) 1.4 0.6 0.75

Lifting Speed Without Full Load (M/Min) 2.9 1.4 1.25

Lowering Speed Full Load (M/Min) 2.3 1.1 1.15

Travel Speed (M/Min) 9 6 6

Hoist Air Consumption (l/sec) 33 33 90

Trolley Air Consumption (l/sec) 25 50 50

Inlet Connection 0.75” 1” 1”

Weight with 3M HOL 380 kg 480 kg 1440 kg

Additional Metre HOL 5.4 kg 10.8 kg 22.8 kg

Flange Minimum (mm) 170” 215” 220”

Flange Maximum (mm) 300 300 305

G.A.Drawing 1536-00 1537-00 1538-00

MODEL A B C D E F G H I JØ K

TCR-6000-ULHR 1115 1065 132.5 535 128 108 TBC 150 160 150 50

TCR-12000-ULHR 1200 1150 132.5 620 128 103 TBC 220 90 150 50

TCR-20000-ULHR 1620 1570 200 890 185 158 TBC 265 145 225 50

MODEL L M N O P Q R S T Ø U

TCR-6000-ULHR 530 645 355 347.5 107.5 37 500 43 62 49

TCR-12000-ULHR 530 645 400 367.5 130 52 540 58 84 67

TCR-20000-ULHR 780 950 500 550 165 64 915 78 110 80

All measurements are in mm | Information subject to change without notice

MODEL TCR-6000-ULHR TCR-12000-ULHR TCR-20000-ULHR

WLL 6000kg 12000kg 20000kg

Chain Falls 2 4 4

Lifting Speed Full Load (M/Min) 1.4 0.6 0.75

Lifting Speed Without Full Load (M/Min) 2.9 1.4 1.25

Lowering Speed Full Load (M/Min) 2.3 1.1 1.15

Travel Speed (M/Min) 9 6 6

Hoist Air Consumption (l/sec) 33 33 90

Trolley Air Consumption (l/sec) 25 50 50

Inlet Connection 0.75” 1” 1”

Weight with 3M HOL 380 kg 480 kg 1440 kg

Additional Metre HOL 5.4 kg 10.8 kg 22.8 kg

Flange Minimum (mm) 170” 215” 220”

Flange Maximum (mm) 300 300 305

G.A.Drawing 1536-00 1537-00 1538-00

Rack & Pinion Pneumatic Trolley Hoists

Our pneumatic rack and pinion trolleys have been developed with high efficiency gearboxes with a rack and pinion drive mechanism to drive the trolley and hold in the required position for use on vessels or floating installations. We can supply trolleys with capacities from 500 kg to 25 tonne to suit various beam and rack modules for monorail trolley hoists and overhead travelling cranes.

The trolleys can either be geared or air driven with operating speeds to match our standard trolleys and can be fitted on to our low headroom, ultra-low headroom or BOP trolleys. SAFE WORKING LOAD - 0.5 tonne to 25 tonne

AVAILABLE OPTIONSVarious speeds available• Offshore version with corrosion protection• Special paint systems• Available on low headroom and ultra-low headroom trolleys• Special designs• Travel limits• Explosion proof ATEX ZONE 1 or 2• Temperature range -20°C to +70°C (-10°C to +70°C as standard)•

MODEL A B C D E F G H I JAT2S-RP 21 TBC 115 70 30 460 410 175 174 495/530AT2S-RP 21 TBC 115 70 30 460 410 175 174 555AT3S-RP 25 TBC 115 100 30 485 435 185 180 645AT6S-RP 28 TBC 115 150 30 600 550 250 180 765AT10S-RP 33 TBC 115 150 30 600 550 250 180 765AT15S-RP 40 TBC 185 150 50 690 640 260 280 1190AT20S-RP 53 TBC 215 240 55 1020 970 400 340 1250AT25S-RP 53 TBC 215 240 55 1020 970 400 340 1400

MODEL K L M N O P Q R S1 S2AT2S-RP 29 40 186 156 29.5 25 20 113 139 32AT2S-RP 29 45 185 155 37 30 54 140 139 32AT3S-RP 34 50 240 200 45 35 31 135 139 32AT6S-RP 42 65 250 200 49 42 72 180 139 32

AT10S-RP 40 60 310 250 62 55 107 255 177 22AT15S-RP 58 84 310 250 67 52 197 465 177 30AT20S-RP 78 110 315 245 80 64 265 535 177 35AT25S-RP 80 125 345 365 103 82 165 315 177 35

All measurements are in mm | Information subject to change without notice

MODEL CAPACITY(Tonne)

TRAVELSPEED (m/

min)

AIR FLOW(l/sec)

AIRPRESSURE

FLANGERANGE

HOSE I/DTROLLEY

AT2S-RP 0.5 + 1 6 25 6 80-300 0.5”AT2S-RP 2 6 25 6 80-300 0.5”AT3S-RP 3 6 25 6 120-300 0.5”AT6S-RP 6 6 25 6 130-300 0.5”AT10S-RP 10 6 40 6 150-300 0.75”AT15S-RP 15 6 40 6 150-300 0.75”AT20S-RP 20 4 80 6 150-300 0.75”AT25S-RP 25 4 80 6 150-300 0.75”

MODEL CAPACITY(Tonne)

TRAVELSPEED (m/

min)

AIR FLOW(l/sec)

AIRPRESSURE

FLANGERANGE

HOSE I/DTROLLEY

AT2S-RP 0.5 + 1 6 25 6 80-300 0.5”AT2S-RP 2 6 25 6 80-300 0.5”AT3S-RP 3 6 25 6 120-300 0.5”AT6S-RP 6 6 25 6 130-300 0.5”AT10S-RP 10 6 40 6 150-300 0.75”AT15S-RP 15 6 40 6 150-300 0.75”AT20S-RP 20 4 80 6 150-300 0.75”AT25S-RP 25 4 80 6 150-300 0.75”

Short HeadroomMonorail Trolley

> Electric Trolley Hoists

Standard HeadroomMonorail Trolley

Articulated StandardHeadroom Monorail Trolley

Standard, Low and Ultra Low HeadroomElectric Chain Hoists

Articulated Trolleys

Electric Wire Rope Hoists

Chain Hoists

Electric Wire Rope Hoists

J.Barnsley Cranes has been supplying the SH Wire Rope Hoist Model into the Oil & Gas, Pharmaceutical, Chemical, Nuclear and Automotive Industries for over 25 years. The SH wire rope hoist programme has been the embodiment of perfection in lifting and crane technology all over the world for many years.

As a market leader in the explosion proof crane industry we appreciate the modular system based on field proven, low maintenance components.

Series manufacture of the standard components means economic advantages for the client. This combined with precise manufacture of off-standard components makes the SH wire rope hoist a widely acknowledged top quality product.

The SH Monorail series is available for the load capacity range 500-25000 Kg in five frame sizes with 26 load capacity variants.

Various off-standard designs are available for use in particular conditions. IP66 pro-tection for example is required for outdoor use when the hoist can be exposed to the harsh environment. Space heaters can be added if there is a danger of formation of condensation or in arctic temperatures.

The Facts5 frame sizes, 26 load capacity • varientsStationary Design or different trollies • and crabs for cranes and system manufactureCompact Design• Largely Maintenance Free, Low • wear service lifeEquipped as standard with 2 • hoisting and travel speedsParticularly smooth starting and • braking characteristicsStandard high quality safety • components

The SH ex wire rope hoist is available for gas explosion protection Zone 1 and Zone 2 and dust explosion protection Zone 21 & 22. It meets the technical, normative and practical requirements specified by ATEX and IECEX.

Use Category Protection against Explosion Protection Class

Zone 1 Ex II 2 G Gas Ex de IIB T4 or Ex de IIC T4Zone 2 Ex II 3 G Gas Ex de nA IIB T3 (T4) or Ex de nA IIC (T4)

Zone 21 Ex II 2 D Dust Ex tD A21 IP 66 T 120degCZone 22 Ex II 3 D Dust Ex tD A22 IP 66 T 120degC

SH Short Headroom Electric Wire Rope Trolley Hoists

SWL MODELLifting Height (Available on

Drum)

Lifting Speed(m/min) HEADROOM

(mm)

APPROXWEIGHT

(kgs)FAST SLOW

1000 SH 3005-25 2/1 20m 12.5 2 470 2801600 SH 3008-20 2/1 20m 10 1.6 470 2802000 SH 4010-25 2/1 30m 12.5 2 580 3323200 SH 4016-16 2/1 30m 8 1.3 620 3575000 SH 5025-32 2/1 40m 16 2.6 600 9708000 SH 5020-40 4/1 20m 10 1.6 600 990

10000 SH 6050-16 2/1 60m 8 1.3 930 210012500 SH 6063-20 2/1 60m 6.3 1 930 220016000 SH 6040-20 4/1 30m 5 0.8 980 3140

Suitable for Safe Areas. Also available for Hazardous Areas - Zone 1,2,21,22* Various configurations available on request including 4/2-1 True Vertical Lifting, Articulated & Low * Headroom trolleysVarious Lifting Speeds & Lift Heights also available on request* Greater Lifting Capacities available on request*

Electric Chain Hoists

J.Barnsley Cranes have been supplying the ST Chain Hoist Model into the Oil & Gas, Pharmaceutical, Chemical, Nuclear and Automotive Industries for over 25 years. The ST Chain Hoist programme continues to be the embodiment of perfection in lifting and crane technology all over the world..

The ST chain hoist programme ranks amongst the most distinctive and comprehensive range of chain hoists on the market. The Hoists are suitable for Safe and Hazardous Area Zones 1, 21 & 22. The ST hoist was the first on the market to convert to ATEX.

The hoists are available in 13 SWL ranges, from 125 kgs to 6,300 kgs. The hoist can be designed with Standard Headroom, Short Headroom and Ultra-Low Headroom Trolleys along with Articulated Trolleys for curved beams with tight radii.

Chain Hoists are used on our Bridge Cranes, Goliath Cranes and Jib Cranes and are used on numerous Monorail applications around the world.

The FactsExtensive chain hoist range for lifting capacities from 125kg to • 6,300kgPatented suspension directly on chain guide• Equipped with two hoisting speeds as standard• Extremely short and compact construction ensures that space can be • utilised to the maximumHigh standard classification in accordance with FEM• Modern Kanban production, available fast• Available as an option in explosion-protected design complying with • ATEX and IECEx

ST Short Headroom Electric Chain Trolley Hoists

SWL MODELLifting Height(Max)

Lifting Speed(m/min) HEADROOM

(mm)WEIGHT

(3m)FAST SLOW

500 ST 1005-8/2 1/1 60 8 2 242 611000 ST 2010-8/2 1/1 40 8 2 311 1041600 ST 3016-8/2 1/1 30 8 2 352 1092000 ST 2010-8/2 2/1 20 4 1 390 1123200 ST 3216 12/3 2/1 40 6 1.5 475 1845000 ST 5025-6/1 2/1 25 3.2 0.75 524 1976300 ST 6032-6/1 2/1 25 3.2 0.75 600 207

Suitable for Safe Areas. Also available for Hazardous Areas - Zone 1 & 21* Various configurations available on request including Low Headroom and Articulated Trolleys* Various Lifting Speeds & Lift Heights also available on request* Greater Lifting Capacities available on request*

J.Barnsley Cranes Ltd - International specialist for explosion protection technology

One of the most extensive chain hoist ranges for Zone 1, • Zone 21 and Zone 22 worldwideCertification available in accordance with ATEX, IECEx, CSA, • Cu Tr and NEC / UL codes.

Tel: +44 (0) 1384 484811 Fax: +44 (0) 1384 484333

Email: sales@jbarnsleycranes.com

www.jbarnsleycranes.comUNIT 16, Pedmore Rd. Ind. Est., Brierley Hill, West Midlands. DY5 1TJ, England, U.K.