Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
Type BLSHorizontally-Mounted:Ultrasonic Sensor
-40°F to +238°FTemperature Range
12-30VDCSupply Voltage
Stainless Steel with PEEKMaterials
ABOUT TYPES BLS 10, BLS 11, BLS 20, BLS 30Ultrasonic Sensor
• One sensor detects different media (liquids, bulk goods,foams: sticky, pasty or high or low viscosity)• Maximum temperature stability and repeat accuracy• Resistant to shocks and vibrations• Response time < 100 ms• Fully integrated electronics• Maintenance-free• Easy to install• LED switching point indicator• IP67 304 or 316 SS enclosure & PEEK tip• Process temperature range -40°F to +238°F
Application Examples: • Shipbuilding
• Chemical Engineering
• Food Industry
• Sewage Treatment
For more information about our complete line of horizontally-mounted liquid level switches, visit our web site at:http://www.granzow.com/liquidlevelcontrols/horizontal/
Ref# B85008-011216 www.granzow.com Page 1 of 4Granzow, Inc.• 2300 Crownpoint Executive Drive, Charlotte, NC 28227-6702 • Phone (704) 845-2300 • Fax (704) 845-2301
©2016 Granzow, Inc. All rights reserved. Information within this document is subject to change, and may be modified at any time, without notice.
Type BLSLEVEL SWITCHES
Ref# B85008 www.granzow.com Page 2 of 4Granzow, Inc.• 2300 Crownpoint Executive Drive, Charlotte, NC 28227-6702 • Phone (704) 845-2300 • Fax (704) 845-2301
© Granzow, Inc. All rights reserved. Information within this document is subject to change, and may be modified at any time, without notice.
Type BLSLEVEL SWITCHES
The BLS Level Sensor, an innovative product for level detection and monitoring.
▪ One sensor detects different media (liquids, bulk goods, foams: sticky,pasty or high or low viscosity)
▪ Maximum temperature stability and repeat accuracy▪ Resistant to shocks and vibrations▪ Response time < 100 ms▪ Fully integrated electronics▪ Maintenance free▪ Small and good looking design▪ LED switching point indicator▪ Factory setting for DK (Ɛ) > 2.5
One sensor for many applications in different industries:
▪ Pharmaceutical▪ Laboratory▪ Food & beverage▪ Watermanagement▪ Railway and vehicle construction▪ Machinery and apparatus engineering▪ Plant construction▪ Chemical and petrochemical industry▪ Shipbuilding
Ref# B85008 www.granzow.com Page 3 of 4Granzow, Inc.• 2300 Crownpoint Executive Drive, Charlotte, NC 28227-6702 • Phone (704) 845-2300 • Fax (704) 845-2301
© Granzow, Inc. All rights reserved. Information within this document is subject to change, and may be modified at any time, without notice.
Type BLSLEVEL SWITCHES
SW 22 mm
41
97
G ½″ ISO 228/1
SW 24 mm
Ø27
6897G ½″ ISO 228/1
+
-
1
4
2
3
+
-
1
4
2
3
+
-
1
4
2
3
+
-
1
4
2
3
LED
0 mA
20 mA
LED0 mA
20 mA
12...30 VDC
PNP Output 20 mA max.
NPN Output 20 mA max.
12...30 VDC
PNP Output 20 mA max.
NPN Output 20 mA max.
12...30 VDC 12...30 VDC
The tip of the sensor is made of PEEK plastic. The sensor works on the principle of frequency-sweep technology. The sensor output can be switched from digital to pulse width modulation (PWM). The sensor recognizes different media and can therefore be used for media separa-tion. The analysis of the PWM signal must be done in the connected control unit (PLC).
Type BLS 10 BLS 11 BLS 20 BLS 30 1)
Process connection G 1/2" G 1/2" G 1/2" G 1/2"
Process temperature -40 to +115 °C -40 to +115 °C -40 to +115 °C -40 to +115 °C
Ambient temperature -40 to +85°C -40 to +85°C -40 to +70°C -40 to +85°C
Max. process pressure 100 bar 100 bar 100 bar 100 bar
Electrical connection Connector M12 Connector M12 Cable 5 m Connector M12
Power supply 12...30 VDC, 35 mA max. 12...30 VDC, 35 mA max. 12...30 VDC, 35 mA max. 12...30 VDC, 35 mA max.
Enclosure IP67 IP67 IP67 IP67
Output configuration PNP PNP PNP PNP
Housing material 1.4404 / ASI 316L 1.4301 / ASI 304 1.4404 / ASI 316L 1.4404 / ASI 316L
DNV Approval x x x x
ATEX Approval Ex ia IIC T5, ATEX II 1G (Gas)
1) Isolation module on demand
BLS 10, 11, 30 BLS 20
Ref# B85008 www.granzow.com Page 4 of 4Granzow, Inc.• 2300 Crownpoint Executive Drive, Charlotte, NC 28227-6702 • Phone (704) 845-2300 • Fax (704) 845-2301
© Granzow, Inc. All rights reserved. Information within this document is subject to change, and may be modified at any time, without notice.
Type BLSLEVEL SWITCHES
Typical applications
▪ Level detection for storage tanks, containers and pipelines.▪ Detection of different media.▪ Protecting pumps from running dry.
BLS Level Sensor for DK-values (Ɛ) > 2.5i.e. for almost all liquids ok, but also for bulk goods, foams, sticky, pasty or high or low viscosity.
Pharmaceutical / Labratory:
▪ Liquids▪ Cream and paste▪ Powder▪ Granules▪ Pills
Food and beverage industry:
▪ Water▪ Milk products▪ Beer▪ Yogurt▪ Coffee beans▪ Liquid chocolate▪ Edible oil▪ Sauces
Industry / Petrochemical:
▪ Water▪ Waste water▪ Oil▪ Ammonia▪ Methanol
Approvals
▪ ATEX▪ DNV Marine Approval▪ FDA (on demand)