Embed Size (px)
Citation preview
Precision Plastic Injection Molds
• SPI Class 101 - 401 Molds • Hot Runner and Conventional Molds • Unscrewing and Core Pull Molds • Stack Molds • Optical and Reflex Molds • Multi-material / 2 Shot Molds • Insert / Vertical / Shuttle Molds
.
.
.
.
.
.
.
.
. Custom Plastic Injection Molding
• 80 Ton to 530 Ton clamp • Short and Long Production Runs • Hot Runner or Conventional Molds • Engineering or Commodity Resins • Optical and Reflector Lens Molding • Multi-Material Molding • Secondary Operations Silk Screening Assembly Packaging Vacuum Testing • Lean Mfg Support - J.I.T. delivery • Bar Coding
Turn-Key Molding Systems
Multi-Material / 2-Shot Molds and Molding
www.tri-par.com
421 Stevens Street Geneva, IL 60134 phone: 630.232.8800 fax: 630.232.8805
TRI - PAR Die and Mold Die and Mold Die and Mold Die and Mold
CORPORATION Since 1960
ISO 9001:2000 Certified
In Tri-Par’s 48 year history we have had the pleasure to serve a variety of high quality industries. The following is a partial list of in-dustries served.
Industries Served: • Medical • Consumer Products • Water Purification • Reflective and Optic Lens • Construction/Safety • Electronics • Automotive • Telecommunications
Construction / Safety
Consumer Electronics
Water / Purification / Filtration
Consumer / Safety
Medical
Automotive / Electronics / Connectors
Appliance
Automotive
Consumer Products
Industries Served
Consumer / Construction
www.tri-par.com
Innovative Designs Lower the Cost of Molded Components
At Tri-Par Die and Mold every project is an
opportunity to reduce your organization’s plastic injection piece part cost. One example is this uniquely designed mold
which provided a 20% piece part savings.
Mold Features Included: Hot Runner, 8 Cavity, Rack Mounted Core Pull Mold that eliminated
the need for an ejection sequence and reduced the mold open stroke from 15” to 3”.
This innovative design lowered the cycle time 20% over previous mold designs.
Maximize Your Return on Investment
Building high quality molds that are production ready fast with a minimal number of turns prior to
production is critical to maximizing the return on investment of a mold.
The mold shown is an 8 cavity filter core mold with 1,472 shutoffs. This mold went from first shots immediately into production.
TRI - PAR Die and Mold
CORPORATION Since 1960
Contact: David Plocinski 630.232.8800 Ext. 16
Multi-Material Capabilities Multi-Material Part Examples
The people at Tri-Par Die and Mold have been designing and building Precision Injection
Molds for over 48 years. We have developed
the technology and culture necessary to deliver
high quality functional appearance parts with complex part geometry where part-
ing line matches and precise shut-offs are criti-
cal. We have engineered multi-material solutions for over 25 years. Tri-Par can
take the worry out of adding soft touch or
multi-material features to your product.
Whether your requirements are for injection molds or plastic parts, contact Tri-Par early on in the design process and take full advantage of our many years of experience.
TRI - PAR Die and Mold
CORPORATION Since 1960
Contact: David Plocinski 630.232.8800 Ext. 16
Optic and Reflex Lens
TRI - PAR Die and Mold
CORPORATION Since 1960
Contact: David Plocinski 630.232.8800 Ext. 16
Tri-Par has the expertise and knowledge
base to tool and mold your most complex lens projects. Tri-Par Die and Mold Corporation has been serving Lens manufacturers since its inception.
Optic or Reflective, Incandescent or L.E.D, Tri-Par has tooled
and molded for both.
Reflective Lens
L.E.D. Optic Lens
16 M
achines
Engel
Sandretto
Sandretto
JSW Electric
Sandretto
Sandretto
Sandretto
HPM
Demag
Kawaguchi
Kawaguchi
ES150/50
S8 -100
S9- 110
J120ELII
S9-180
S8-175
S8-225
T335-
1120A
HT 400/710-
1920
KS400-B
K480-I
(x2)
(x3)
(x1)
(x1)
(x1)
(x2)
(x1)
(x2)
(x1)
(x1)
(x1)
Clamp Tonnage (US Tons)
80 Ton
100 Ton
110 Ton
120 Ton
180 Ton
225 Ton
275 Ton
330 Ton
400 Ton
400 Ton
530 Ton
Shot Volume (oz. PS)
2.1 oz.
4.2 & 9.18
oz.
4.2 oz.
5.6 oz.
12.57 oz.
12.57 oz
17.5 oz.
18.0 oz.
40.3
41.4
66.45
Tie Bar Spacing (in.)
13.62x13.62
16.34x16.34
16.34x16.34
16.1 x 16.1
20.07x20.07
20.07x20.07
22.44x22.44
25.0x25.0
28.0x28.0
25x25
32x28
Platen Dimensions (in.)
20.085x21.73
24.02x24.02
24.02x24.02
24.0 x 24.0
30.31x30.31
30.31x30.31
33.85x33.85
38.0x38.0
42.0x42.0
37.9x40.1
47x43
Min. Mold Height (in.)
5.91
3.93
3.93
7.9
8.27
8.27
8.27
13.78
8
9.8
12
Max. Mold Height (in.)
14.96
18.11
18.11
15.7
24.8
24.8
28.74
29.53
26
25.5
29.5
Max. Day Light (in.)
26.77
34.25
34.25
29.5
21.65
21.65
53.54
56.3
54
51.1
33.07
Ejection Stroke (in.)
3.94
5.11
5.11
3.1
7.48
7.48*
8.66
7
6
5.1
6.29
Core Pulls
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
Yes
Air Blast
No
Yes
Yes
No
Yes
Yes
Yes
Yes
No
No
Yes
Pneumatic Valve Gates
No
Yes
Yes
No
Yes
Yes
Yes
Yes
No
No
No
Tonnage Control
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Clamp Type
Toggle
Toggle
Toggle
Toggle
Toggle
Toggle
Toggle
Toggle
Toggle
Toggle
Toggle
Screw L/D
20:01
21:01
21:01
20:01
21:01
21:01
21:01
20:01
20:01
19:01
20:01
Machine Year
1989
1999/2000
2004
2000
2004
1996/2000
2000
2000
2007
1982
1988
Tri-Par Die and Mold Corporation
Injection M
olding M
achine Specifications
* Note: S8-175 Sandretto does not have the 4”x16” PKO in the vertical direction
www.tri-par.com
Software
Electrical Discharge Machining (EDM)
Milling / Turning
Grinding
Other Equipment
• Solidworks 2008 3-D Design Software • AutoCAD Surfacing Software
• AutoCAD Mechanical Desktop 4.0 Solid Modeler • CAMAX Command 3-D CNC Milling Software
• AutoCAD R2000 Mfg Expert Software • Smart Cam 2-D Production Milling Software
• Okamoto CNC EDM 24X20X16 travel 4,000 lb. ta-ble load cap. 250 AMP
• Hansvedt SM 150B/201 EDMs w/readouts
• Charmilles Roboform 20 CNC EDM w/tool changer
• LeBlond/Makino FMC 105/A30 Vertical Machining Centers 20 x 40
• (2) Bridgeports w/readouts
• Hurco Hawk CNC Milling Machine 14 x 31 • Lathe AFM 20” Swing
• Tree VMC 1050/40 Vertical Machining Center 20 x 40
• Hardinge High Speed Bench Lathe 5”
• Okamoto 16X32 ST Automatic Surface Grinder • (4) Okamoto 7X14 Surface Grinders w/readouts
• Marvel 8/M8 Power Band Saw • Trinco 30 Dry Sandblaster
• MAS VR4 Radial Arm Drill Press • (3) Fork Lift Trucks to 8,000 lb.
• Cutter Grinders • Mitutoyo PH 350 14” Comparator
• KR Wilson 37G Arbor Press Contact: David Plocinski 630-232-8800 Ext. 16 [email protected] www.tri-par.com
Tooling Equipment List
Tri-Par Die and Mold Corporation offers a full service mold manufacturing facility. Tri-Par capabilities include in-house mold / product design in 2D or 3D format. The tool room is conveniently integrated with the molding facility to support the maintenance of pro-duction molds. The mold manufacturing group has built thousands of
high quality molds. Our capabilities include Hot / Cold Runner, Multi-Shot, Stack Molds, Insert/Vertical/Shuttle, Multi-Material/Two Shot, Unscrewing, Gas Assist and Hydraulic / Cam Actions molds. Below is a partial list of the mold manufacturing groups equipment list:
TRI - PAR Die and Mold
CORPORATION Since 1960
Contact: David Plocinski 630.232.8800 Ext. 16 [email protected]
Tooling Request for Quote
Contacts
General Management and Sales William Plocinski—President 630-232-8800 Extension: 21 [email protected] David W. Plocinski—General Manager 630-232-8800 Extension: 16 [email protected]
Injection Molding Group Ron Swanson—Production Manager 630-232-8800 Extension: 12 [email protected] Todd Smith—Materials and Quality Manager 630-232-8800 Extension: 15 [email protected]
Main Phone: 630-232-8800 Fax: 630-232-8805 Website: www.tri-par.com FTP Site: ftp.tri-par.com
Tooling Group Rick Dall—Engineer 630-232-8800 Extension: 20 [email protected] Dave Leverenz—Tooling Sales Manager 630-232-8800 Extension: 27 [email protected] Cameron Adkins—Toolroom Manager 630-232-8800 Extension: 26 [email protected]
General Office Shirley Plocinski—Office Manager 630-232-8800 Extension: 19 [email protected] Cristina Caramay—Secretary 630-232-8800 Extension: 0 or 10 [email protected]
TRI - PAR Die and Mold
CORPORATION Since 1960
Contact: David Plocinski 630.232.8800 Ext. 16
