10
CPS210285 CONCEALED FASTENER TRESPA PANEL SYSTEM July 20, 2012 System Features: System Features: System Features: System Features: Low profile system – Varies by panel thickness o 10mm Panels – 2 5 / 8 ” (without shims). o 13mm Panels – 2 1 / 2 ” (without shims). Drained Back Ventilated System (DBVS). Allows the use of 10mm ( 3 / 8 ”), and 13mm ( 1 / 2 ”) Phenolic Sheet stock. Four sizes of Phenolic sheet stock available: o 5’ x 10’ (nominal). Maximum usable size – 59¾” x 119½”. o 6’ x 8’ (nominal). Maximum usable size – 72¾” x 99¾”. o 6’ x 12’ (nominal). Maximum usable size – 72¾” x 143”. o 7’ x 14’ (nominal). Maximum usable size – 83¼” x 167½”. Tested system: o ASTM E 330 Structural Loads o ASTM E 119 Fire Tests of Building Materials o ASTM E 84 Surface Burning Characteristic’s o NFPA=285 Fire Propagation Characteristics Manufactured with in=excess of five [5] years experience in this type of panel system. Easily accommodates vertical, soffit, sloped, and coping panels. Especially suited for square and rectangular column covers. System Benefits: System Benefits: System Benefits: System Benefits: Simplicity of Installation. Mounting extrusions shipped loose – More panels per delivery. Large and varied selection of colors and finishes = includes “Wood Grain” and “Naturals” LEED ® : o Extrusion material contains approximately 23% recycled content. System Notes: System Notes: System Notes: System Notes: Sequential panel installation. o Early decision must be made on direction of installation. Mounting Clips and Rivets shipped loose. o Gesipa ® Powerbird Blind Rivet Tool not furnished by CPS (recommended tool for installation of CPS=210 brackets to concealed side of Trespa panels) Weather Resistant Barrier (WRB) required behind panels. o Specific WRB required for NFPA=285 Compliance Vaproshield ® WallShield ® or WrapShield ® (Mechanically Fastened) Vaproshield ® WrapShield ® SA (Self Adhesive) TYVEK ® Commercial Wrap sheet membrane o 1” Mineral Wool with specific properties required for NFPA=285 compliance. Curved panels are not available with the CPS=210 fixing system

TRESPA PANEL SYSTEMcalifsheetmetal.com/wp-content/uploads/2016/05/CPS210...TRESPA PANEL SYSTEM OPTIONAL FEATURES 1020 N. MARSHALL AVE., EL CAJON, CA 92020 Ph. 619 956 0866 Fx. 619

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: TRESPA PANEL SYSTEMcalifsheetmetal.com/wp-content/uploads/2016/05/CPS210...TRESPA PANEL SYSTEM OPTIONAL FEATURES 1020 N. MARSHALL AVE., EL CAJON, CA 92020 Ph. 619 956 0866 Fx. 619

CPS�210�285 CONCEALED FASTENER TRESPA PANEL SYSTEM

July 20, 2012

System Features:System Features:System Features:System Features:

• Low profile system – Varies by panel thickness

o 10mm Panels – 25/8” (without shims).

o 13mm Panels – 21/2” (without shims).

• Drained Back Ventilated System (DBVS).

• Allows the use of 10mm (3/8”), and 13mm (1/2”) Phenolic Sheet stock.

• Four sizes of Phenolic sheet stock available:

o 5’ x 10’ (nominal). Maximum usable size – 59¾” x 119½”.

o 6’ x 8’ (nominal). Maximum usable size – 72¾” x 99¾”.

o 6’ x 12’ (nominal). Maximum usable size – 72¾” x 143”.

o 7’ x 14’ (nominal). Maximum usable size – 83¼” x 167½”.

• Tested system:

o ASTM E 330 Structural Loads

o ASTM E 119 Fire Tests of Building Materials

o ASTM E 84 Surface Burning Characteristic’s

o NFPA=285 Fire Propagation Characteristics

• Manufactured with in=excess of five [5] years experience in this type of panel system.

• Easily accommodates vertical, soffit, sloped, and coping panels.

• Especially suited for square and rectangular column covers.

System Benefits:System Benefits:System Benefits:System Benefits:

• Simplicity of Installation.

• Mounting extrusions shipped loose – More panels per delivery.

• Large and varied selection of colors and finishes = includes “Wood Grain” and “Naturals”

• LEED®:

o Extrusion material contains approximately 23% recycled content.

System Notes:System Notes:System Notes:System Notes:

• Sequential panel installation.

o Early decision must be made on direction of installation.

• Mounting Clips and Rivets shipped loose.

o Gesipa® Powerbird Blind Rivet Tool not furnished by CPS (recommended tool for installation of

CPS=210 brackets to concealed side of Trespa panels)

• Weather Resistant Barrier (WRB) required behind panels.

o Specific WRB required for NFPA=285 Compliance

� Vaproshield® WallShield® or WrapShield® (Mechanically Fastened)

� Vaproshield® WrapShield® SA (Self Adhesive)

� TYVEK® Commercial Wrap sheet membrane

o 1” Mineral Wool with specific properties required for NFPA=285 compliance.

• Curved panels are not available with the CPS=210 fixing system

Page 2: TRESPA PANEL SYSTEMcalifsheetmetal.com/wp-content/uploads/2016/05/CPS210...TRESPA PANEL SYSTEM OPTIONAL FEATURES 1020 N. MARSHALL AVE., EL CAJON, CA 92020 Ph. 619 956 0866 Fx. 619

CPS�210�285 CONCEALED FASTENER

1020 N. MARSHALL AVE., EL CAJON, CA 92020

Ph. 619�956�0866 Fx. 619�956�0855

Pg. 210�285�001

July 20, 2012

Scale: 6" = 1'�0"

TRESPA PANEL SYSTEM

Page 3: TRESPA PANEL SYSTEMcalifsheetmetal.com/wp-content/uploads/2016/05/CPS210...TRESPA PANEL SYSTEM OPTIONAL FEATURES 1020 N. MARSHALL AVE., EL CAJON, CA 92020 Ph. 619 956 0866 Fx. 619

1020 N. MARSHALL AVE., EL CAJON, CA 92020

Ph. 619�956�0866 Fx. 619�956�0855

Scale: 6" = 1'�0" Pg. 210�285�002

July 20, 2012

CPS�210�285 CONCEALED FASTENERTRESPA PANEL SYSTEM

Page 4: TRESPA PANEL SYSTEMcalifsheetmetal.com/wp-content/uploads/2016/05/CPS210...TRESPA PANEL SYSTEM OPTIONAL FEATURES 1020 N. MARSHALL AVE., EL CAJON, CA 92020 Ph. 619 956 0866 Fx. 619

1020 N. MARSHALL AVE., EL CAJON, CA 92020

Ph. 619�956�0866 Fx. 619�956�0855

Scale: 6" = 1'�0" Pg. 210�285�003

July 20, 2012

CPS�210�285 CONCEALED FASTENERTRESPA PANEL SYSTEM

Page 5: TRESPA PANEL SYSTEMcalifsheetmetal.com/wp-content/uploads/2016/05/CPS210...TRESPA PANEL SYSTEM OPTIONAL FEATURES 1020 N. MARSHALL AVE., EL CAJON, CA 92020 Ph. 619 956 0866 Fx. 619

1020 N. MARSHALL AVE., EL CAJON, CA 92020

Ph. 619�956�0866 Fx. 619�956�0855

Scale: 6" = 1'�0" Pg. 210�285�004

July 20, 2012

CPS�210�285 CONCEALED FASTENERTRESPA PANEL SYSTEM

Page 6: TRESPA PANEL SYSTEMcalifsheetmetal.com/wp-content/uploads/2016/05/CPS210...TRESPA PANEL SYSTEM OPTIONAL FEATURES 1020 N. MARSHALL AVE., EL CAJON, CA 92020 Ph. 619 956 0866 Fx. 619

1020 N. MARSHALL AVE., EL CAJON, CA 92020

Ph. 619�956�0866 Fx. 619�956�0855

Scale: 6" = 1'�0" Pg. 210�285�005

July 20, 2012

CPS�210�285 CONCEALED FASTENERTRESPA PANEL SYSTEM

Page 7: TRESPA PANEL SYSTEMcalifsheetmetal.com/wp-content/uploads/2016/05/CPS210...TRESPA PANEL SYSTEM OPTIONAL FEATURES 1020 N. MARSHALL AVE., EL CAJON, CA 92020 Ph. 619 956 0866 Fx. 619

1020 N. MARSHALL AVE., EL CAJON, CA 92020

Ph. 619�956�0866 Fx. 619�956�0855

Scale: 6" = 1'�0" Pg. 210�285�006

July 20, 2012

CPS�210�285 CONCEALED FASTENERTRESPA PANEL SYSTEM

Page 8: TRESPA PANEL SYSTEMcalifsheetmetal.com/wp-content/uploads/2016/05/CPS210...TRESPA PANEL SYSTEM OPTIONAL FEATURES 1020 N. MARSHALL AVE., EL CAJON, CA 92020 Ph. 619 956 0866 Fx. 619

1020 N. MARSHALL AVE., EL CAJON, CA 92020

Ph. 619�956�0866 Fx. 619�956�0855

Scale: 6" = 1'�0" Pg. 210�285�007

July 20, 2012

CPS�210�285 CONCEALED FASTENERTRESPA PANEL SYSTEM

OPTIONAL FEATURES

Page 9: TRESPA PANEL SYSTEMcalifsheetmetal.com/wp-content/uploads/2016/05/CPS210...TRESPA PANEL SYSTEM OPTIONAL FEATURES 1020 N. MARSHALL AVE., EL CAJON, CA 92020 Ph. 619 956 0866 Fx. 619

1020 N. MARSHALL AVE., EL CAJON, CA 92020

Ph. 619�956�0866 Fx. 619�956�0855

Scale: 6" = 1'�0" Pg. 210�285�008

July 20, 2012

CPS�210�285 CONCEALED FASTENERTRESPA PANEL SYSTEM

OPTIONAL FEATURES

Page 10: TRESPA PANEL SYSTEMcalifsheetmetal.com/wp-content/uploads/2016/05/CPS210...TRESPA PANEL SYSTEM OPTIONAL FEATURES 1020 N. MARSHALL AVE., EL CAJON, CA 92020 Ph. 619 956 0866 Fx. 619

1020 N. MARSHALL AVE., EL CAJON, CA 92020

Ph. 619�956�0866 Fx. 619�956�0855

Scale: 6" = 1'�0" Pg. 210�285�009

July 20, 2012

CPS�210�285 CONCEALED FASTENERTRESPA PANEL SYSTEM

EXTRUSION EXPANSION JOINT