Upload
dodien
View
225
Download
0
Embed Size (px)
Citation preview
TRELLEBORG PIPE SE ALS
F-570
SEAL DESIGN AND FUNCTION
Trelleborg’s F-570 is a single lip seal, used for connecting PVC pipes to thin walled PVC, PE or metallic tanks and pipes.
SEAL PERFORMANCE
The F-570 fits around the inside diameter of the access hole.
The design of the seal provides excellent sealing performance and significant angular deflection possibilities.
F-570 is usually used on smooth wall PVC pipes, but small dimensions (DN 25 to DN 90) may also be used with corrugated hoses in dry networks.
DN 25 to DN 90 mm seals accomodate 2 pipe diameters. see table of dimensions). The unwanted part of the seal is cut away when used for the larger DN.
MATERIAL
Synthetic rubberHardness 40±5 IRHD Approved in accordance with EN 681-1 Protected against ozoneAvailable in oil resistance material
SEAL MARKING AND BOX LABELS
Each seal is marked with outside diameter and manu-facturing period.
The box is labelled with corresponding data.
Flexible Connection System for Pipes to Thin Walled Tanks and Pipes
JOINT ASSEMBLY
Chamfer the edge of the connecting pipeClean the sealLubricate the edge of the connecting pipeCenter the end of the pipe and push it into the seal
Pipe connections with F-570 shall always be laid in accordance with applicable standards and regula-tions.
Please contact Trelleborg Pipe Seals for technical advice and joint design recommendations to meet your performance requirements.
Examples of authorities Trelleborg Pipe Seals cooperates with:
Trelleborg Pipe Seals Lelystad B.V.P.O.Box 62, 8200 AB Lelystad, the Netherlands. Visiting address: Pascallaan 80, 8218 NJ Lelystad, the Netherlands.
Tel: +31(0)320267979, Fax: +31(0)320267980.www.Trelleborg.com/pipeseals
Trelleborg Pipe Seals Lelystad 2011/01. We reserve the right to make changes without prior notification.
Example of authorities Trelleborg Pipe Seals cooperates with:
Seal Marking and Box LabelsEach seal is marked with seal dimension and period of manufacture. The box is labelled with correspon-ding data.
Example of sizes
Dimensions, mm
Pipe size, mm A B
63 10,4 17,8
75 11,6 19,9
90 12,7 21,7
100-S2 13.8 21.6
110 13,8 22,0
125 13,8 23,6
140 14,8 25,3
150-S2 17.2 23.5
160 15,9 27,2
180 17.5 28.8
200 16,9 29,0
200-S2 20.2 32
225 18,0 30,8
225-S2 21.8 33.8
250 21,1 34,2
250-S2 23.6 37
280 22,5 36,1
300-S2 23.7 40.4
315 23,6 37,6Pipes with F-576 shall always be laid in accordance with applicable standards and regulations. Please contact Trelleborg Pipe Seals Lelystad BV for technical advice and joint design recommendations to meet your performance requirements.
1. Chamfer the spigot end.2. Clean the socket.3. Apply lubricant on the spigot before assembly.4. Slide the spigot into the socket, thus compres-
sing the sealing lip.
Pipe Assembly
355 25.8 40.9
400 28,0 44,9
450 29,5 47,0
500 32,2 51,4
630 38.2 61.3
ø EXT Connecting
Pipe
Art. Number (Usual
Material)
ø Hole Recommended
(±0.5)
Wall Thickness (Approx.)
DN25/32 1994820 40 2 - 10
DN40/50 1503825 57 3 - 12
DN50/63 1504724 70 3 - 14
DN75/90 1504024 98 3 - 14
AVAILABLE DIMENSIONS (MM)
ø EXT Connecting
Pipe
Art. Number Material
ø Hole Recommended
(±0.5)
Wall Thickness (Approx.)
DN1001663922 EPDM
110
3 - 81663931 NBR
DN1101500820 EPDM
1171500836 NBR
DN1251927624 EPDM
132
5 - 81927633 NBR
DN1601434122 EPDM
1671434131 NBR
DN2001434220 EPDM
207
6 - 81434236 NBR
DN2501434300 EPDM
2621434334 NBR
DN3151718824 EPDM
327 6 - 101718833 NBR
From ø 25 to ø 90 mm
* NBR used for Hydrocarbon applications* EPDM used for general application
Trelleborg Pipe Seals B.V., P.O. Box 62, NL-8200 AB Lelystad, Telefon +31 320 2679-79, Fax +31 320 2679-80
Trelleborg Pipe Seals Milford Inc, 250 Elm Street Milford, New Hampshire 03055, USA, Tel: +1 603 673 8680, Fax: +1 603 673 7271
WWW.TRELLEBORG.COM/PIPE-SEALS
Vers
ion
2.0_
2018
From ø 100 to ø 315 mm