Transport Fileversions

BUSINESSOBJECTS ENTERPRISE 3.1 ........................................................................................................................ 2

SERVICE PACK 1 ............................................................................................................................................................. 2

FP 1.3 .................................................................................................................................................................... 2

FP 1.4 .................................................................................................................................................................... 3

FP 1.5 .................................................................................................................................................................... 4

FP 1.6 .................................................................................................................................................................... 4

FP 1.7 .................................................................................................................................................................... 5

FP 1.8 .................................................................................................................................................................... 6

FP 1.9 .................................................................................................................................................................... 6

FP 1.10 .................................................................................................................................................................. 7

SERVICE PACK 2 ............................................................................................................................................................. 8

FP 2.1 .................................................................................................................................................................... 8

FP 2.2 .................................................................................................................................................................... 9

FP 2.3 .................................................................................................................................................................. 10

FP 2.4 .................................................................................................................................................................. 10

FP 2.5 .................................................................................................................................................................. 10

FP 2.6 .................................................................................................................................................................. 11

FP 2.7 .................................................................................................................................................................. 12

FP 2.9 .................................................................................................................................................................. 13

FP 2.10 ................................................................................................................................................................ 13

FP 2.11 ................................................................................................................................................................ 14

FP 2.12 ................................................................................................................................................................ 15

SERVICE PACK 3 ........................................................................................................................................................... 16

FP 3.1 .................................................................................................................................................................. 17

FP 3.2 .................................................................................................................................................................. 18

FP 3.3 .................................................................................................................................................................. 19

FP 3.4 .................................................................................................................................................................. 20

FP 3.5 .................................................................................................................................................................. 21

FP 3.6 .................................................................................................................................................................. 22

FP 3.7 .................................................................................................................................................................. 23

FP 3.8 .................................................................................................................................................................. 24

SERVICE PACK 4 ........................................................................................................................................................... 25

FP 4.1 .................................................................................................................................................................. 26

FP 4.2 .................................................................................................................................................................. 27

BusinessObjects Enterprise 3.1 This document lists the transport files that have been delivered with Service Packs and Fix Packs (FP) in chronological order.

Service Pack 1

If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.) * Open SQL Connectivity transport (K900084.r22 and R900084.r22) * Info Set Connectivity transport (K900085.r22 and R900085.r22) * Row-level Security Definition transport (K900086.r22 and R900086.r22) * Cluster Definition transport (K900093.r22 and R900093.r22) * Authentication Helpers transport (K900088.r22 and R900088.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900574.r21 and R900574.r21) * Info Set Connectivity transport (K900575.r21 and R900575.r21) * Row-level Security Definition transport (K900576.r21 and R900576.r21) * Cluster Definition transport (K900585.r21 and R900585.r21) * Authentication Helpers transport (K900578.r21 and R900578.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900579.r21 and R900579.r21) * Personalization transport (K900580.r21 and R900580.r21) * MDX Query Connectivity transport (K900581.r21 and R900581.r21) * ODS Connectivity transport (K900582.r21 and R900582.r21)

FP 1.3

If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.) * Open SQL Connectivity transport (K900103.r22 and R900103.r22)

* Info Set Connectivity transport (K900085.r22 and R900085.r22) * Row-level Security Definition transport (K900098.r22 and R900098.r22) * Cluster Definition transport (K900099.r22 and R900099.r22) * Authentication Helpers transport (K900088.r22 and R900088.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900593.r21 and R900593.r21) * Info Set Connectivity transport (K900575.r21 and R900575.r21) * Row-level Security Definition transport (K900594.r21 and R900594.r21) * Cluster Definition transport (K900602.r21 and R900602.r21) * Authentication Helpers transport (K900578.r21 and R900578.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900599.r21 and R900599.r21) * Personalization transport (K900580.r21 and R900580.r21) * MDX Query Connectivity transport (K900581.r21 and R900581.r21) * ODS Connectivity transport (K900582.r21 and R900582.r21)

FP 1.4

If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.) * Open SQL Connectivity transport (K900103.r22 and R900103.r22) * Info Set Connectivity transport (K900085.r22 and R900085.r22) * Row-level Security Definition transport (K900105.r22 and R900105.r22) * Cluster Definition transport (K900106.r22 and R900106.r22) * Authentication Helpers transport (K900088.r22 and R900088.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900593.r21 and R900593.r21) * Info Set Connectivity transport (K900575.r21 and R900575.r21) * Row-level Security Definition transport (K900627.r21 and R900627.r21) * Cluster Definition transport (K900628.r21 and R900628.r21) * Authentication Helpers transport (K900578.r21 and R900578.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.)

* Content Administration transport (K900632.r21 and R900632.r21) * Personalization transport (K900580.r21 and R900580.r21) * MDX Query Connectivity transport (K900581.r21 and R900581.r21) * ODS Connectivity transport (K900582.r21 and R900582.r21)

FP 1.5


FP 1.6

If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.) * Open SQL Connectivity transport (K900103.r22 and R900103.r22) * Info Set Connectivity transport (K900085.r22 and R900085.r22)

* Row-level Security Definition transport (K900105.r22 and R900105.r22) * Cluster Definition transport (K900106.r22 and R900106.r22) * Authentication Helpers transport (K900088.r22 and R900088.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900593.r21 and R900593.r21) * Info Set Connectivity transport (K900575.r21 and R900575.r21) * Row-level Security Definition transport (K900627.r21 and R900627.r21) * Cluster Definition transport (K900628.r21 and R900628.r21) * Authentication Helpers transport (K900578.r21 and R900578.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900632.r21 and R900632.r21) * Personalization transport (K900580.r21 and R900580.r21) * MDX Query Connectivity transport (K900581.r21 and R900581.r21) * ODS Connectivity transport (K900582.r21 and R900582.r21)

FP 1.7

If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.) * Open SQL Connectivity transport (K900103.r22 and R900103.r22) * Info Set Connectivity transport (K900085.r22 and R900085.r22) * Row-level Security Definition transport (K900105.r22 and R900105.r22) * Cluster Definition transport (K900106.r22 and R900106.r22) * Authentication Helpers transport (K900088.r22 and R900088.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900593.r21 and R900593.r21) * Info Set Connectivity transport (K900575.r21 and R900575.r21) * Row-level Security Definition transport (K900627.r21 and R900627.r21) * Cluster Definition transport (K900628.r21 and R900628.r21) * Authentication Helpers transport (K900578.r21 and R900578.r21) The following files must be used on an SAP BW system:

(These files are Unicode enabled.) * Content Administration transport (K900632.r21 and R900632.r21) * Personalization transport (K900580.r21 and R900580.r21) * MDX Query Connectivity transport (K900581.r21 and R900581.r21) * ODS Connectivity transport (K900582.r21 and R900582.r21)

FP 1.8


FP 1.9

If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.)

* Open SQL Connectivity transport (K900103.r22 and R900103.r22) * Info Set Connectivity transport (K900085.r22 and R900085.r22) * Row-level Security Definition transport (K900105.r22 and R900105.r22) * Cluster Definition transport (K900106.r22 and R900106.r22) * Authentication Helpers transport (K900088.r22 and R900088.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900593.r21 and R900593.r21) * Info Set Connectivity transport (K900575.r21 and R900575.r21) * Row-level Security Definition transport (K900627.r21 and R900627.r21) * Cluster Definition transport (K900628.r21 and R900628.r21) * Authentication Helpers transport (K900578.r21 and R900578.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900632.r21 and R900632.r21) * Personalization transport (K900580.r21 and R900580.r21) * MDX Query Connectivity transport (K900581.r21 and R900581.r21) * ODS Connectivity transport (K900582.r21 and R900582.r21)

FP 1.10

If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.) * Open SQL Connectivity transport (K900103.r22 and R900103.r22) * Info Set Connectivity transport (K900085.r22 and R900085.r22) * Row-level Security Definition transport (K900105.r22 and R900105.r22) * Cluster Definition transport (K900106.r22 and R900106.r22) * Authentication Helpers transport (K900088.r22 and R900088.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900593.r21 and R900593.r21) * Info Set Connectivity transport (K900575.r21 and R900575.r21) * Row-level Security Definition transport (K900627.r21 and R900627.r21) * Cluster Definition transport (K900628.r21 and R900628.r21)

* Authentication Helpers transport (K900578.r21 and R900578.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900632.r21 and R900632.r21) * Personalization transport (K900580.r21 and R900580.r21) * MDX Query Connectivity transport (K900581.r21 and R900581.r21) * ODS Connectivity transport (K900582.r21 and R900582.r21)

Service Pack 2

* Open SQL Connectivity transport (K900107.r22 and R900107.r22) * Info Set Connectivity transport (K900085.r22 and R900085.r22) * Row-level Security Definition transport (K900105.r22 and R900105.r22) * Cluster Definition transport (K900106.r22 and R900106.r22) * Authentication Helpers transport (K900088.r22 and R900088.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900648.r21 and R900648.r21) * Info Set Connectivity transport (K900575.r21 and R900575.r21) * Row-level Security Definition transport (K900627.r21 and R900627.r21) * Cluster Definition transport (K900628.r21 and R900628.r21) * Authentication Helpers transport (K900578.r21 and R900578.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900645.r21 and R900645.r21) * Personalization transport (K900646.r21 and R900646.r21) * MDX Query Connectivity transport (K900643.r21 and R900643.r21) * ODS Connectivity transport (K900582.r21 and R900582.r21

FP 2.1

If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.) * Open SQL Connectivity transport (K900107.r22 and R900107.r22)

* Info Set Connectivity transport (K900085.r22 and R900085.r22) * Row-level Security Definition transport (K900105.r22 and R900105.r22) * Cluster Definition transport (K900106.r22 and R900106.r22) * Authentication Helpers transport (K900088.r22 and R900088.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900648.r21 and R900648.r21) * Info Set Connectivity transport (K900575.r21 and R900575.r21) * Row-level Security Definition transport (K900627.r21 and R900627.r21) * Cluster Definition transport (K900628.r21 and R900628.r21) * Authentication Helpers transport (K900578.r21 and R900578.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900645.r21 and R900645.r21) * Personalization transport (K900646.r21 and R900646.r21) * MDX Query Connectivity transport (K900643.r21 and R900643.r21) * ODS Connectivity transport (K900582.r21 and R900582.r21)

FP 2.2

If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.) * Open SQL Connectivity transport (K900107.r22 and R900107.r22) * Info Set Connectivity transport (K900085.r22 and R900085.r22) * Row-level Security Definition transport (K900105.r22 and R900105.r22) * Cluster Definition transport (K900106.r22 and R900106.r22) * Authentication Helpers transport (K900088.r22 and R900088.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900648.r21 and R900648.r21) * Info Set Connectivity transport (K900575.r21 and R900575.r21) * Row-level Security Definition transport (K900627.r21 and R900627.r21) * Cluster Definition transport (K900628.r21 and R900628.r21) * Authentication Helpers transport (K900578.r21 and R900578.r21) The following files must be used on an SAP BW system:

(These files are Unicode enabled.) * Content Administration transport (K900645.r21 and R900645.r21) * Personalization transport (K900646.r21 and R900646.r21) * MDX Query Connectivity transport (K900643.r21 and R900643.r21) * ODS Connectivity transport (K900582.r21 and R900582.r21)

FP 2.3

FP 2.4


FP 2.5


FP 2.6

If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.) * Open SQL Connectivity transport (K900114.r22 and R900114.r22) * Info Set Connectivity transport (K900115.r22 and R900115.r22) * Row-level Security Definition transport (K900116.r22 and R900116.r22) * Cluster Definition transport (K900117.r22 and R900117.r22) * Authentication Helpers transport (K900118.r22 and R900118.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.)

* Open SQL Connectivity transport (K900671.r21 and R900671.r21) * Info Set Connectivity transport (K900672.r21 and R900672.r21) * Row-level Security Definition transport (K900676.r21 and R900676.r21) * Cluster Definition transport (K900674.r21 and R900674.r21) * Authentication Helpers transport (K900675.r21 and R900675.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900665.r21 and R900665.r21) * Personalization transport (K900666.r21 and R900666.r21) * MDX Query Connectivity transport (K900667.r21 and R900667.r21) * ODS Connectivity transport (K900668.r21 and R900668.r21)

FP 2.7


FP 2.9

There are two sets of transport files, which can be used with BusinessObjects Enterprise Integration Kit for SAP. One set is ANSI and the other set is Unicode enabled. The set of transports you must use depends on the BASIS system your SAP system is running on. Additionally, each transport consists of a data file and a cofile, which are listed in brackets behind the transport names. If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.) * Open SQL Connectivity transport (K900114.r22 and R900114.r22) * Info Set Connectivity transport (K900115.r22 and R900115.r22) * Row-level Security Definition transport (K900116.r22 and R900116.r22) * Cluster Definition transport (K900117.r22 and R900117.r22) * Authentication Helpers transport (K900118.r22 and R900118.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900671.r21 and R900671.r21) * Info Set Connectivity transport (K900672.r21 and R900672.r21) * Row-level Security Definition transport (K900676.r21 and R900676.r21) * Cluster Definition transport (K900674.r21 and R900674.r21) * Authentication Helpers transport (K900675.r21 and R900675.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900665.r21 and R900665.r21) * Personalization transport (K900666.r21 and R900666.r21) * ODS Connectivity transport (K900668.r21 and R900668.r21) If your SAP BW system has not applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900667.r21 and R900667.r21) If your SAP BW system has applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900025.r68 and R900025.r68)

FP 2.10


FP 2.11


FP 2.12

There are two sets of transport files, which can be used with BusinessObjects Enterprise Integration Kit for SAP. One set is ANSI and the other set is Unicode enabled.

The set of transports you must use depends on the BASIS system your SAP system is running on. Additionally, each transport consists of a data file and a cofile, which are listed in brackets behind the transport names. If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.) * Open SQL Connectivity transport (K900114.r22 and R900114.r22) * Info Set Connectivity transport (K900115.r22 and R900115.r22) * Row-level Security Definition transport (K900116.r22 and R900116.r22) * Cluster Definition transport (K900117.r22 and R900117.r22) * Authentication Helpers transport (K900118.r22 and R900118.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900671.r21 and R900671.r21) * Info Set Connectivity transport (K900672.r21 and R900672.r21) * Row-level Security Definition transport (K900676.r21 and R900676.r21) * Cluster Definition transport (K900674.r21 and R900674.r21) * Authentication Helpers transport (K900675.r21 and R900675.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900665.r21 and R900665.r21) * Personalization transport (K900666.r21 and R900666.r21) * ODS Connectivity transport (K900668.r21 and R900668.r21) If your SAP BW system has not applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900667.r21 and R900667.r21) If your SAP BW system has applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900047.R72 and R900047.R72)

Service Pack 3

There are two sets of transport files, which can be used with BusinessObjects Enterprise Integration Kit for SAP. One set is ANSI and the other set is Unicode enabled.

The set of transports you must use depends on the BASIS system your SAP system is running on. Additionally, each transport consists of a data file and a cofile, which are listed in brackets behind the transport names. If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.) * Open SQL Connectivity transport (K900120.r22 and R900120.r22) * Info Set Connectivity transport (K900121.r22 and R900121.r22) * Row-level Security Definition transport (K900122.r22 and R900122.r22) * Cluster Definition transport (K900123.r22 and R900123.r22) * Authentication Helpers transport (K900124.r22 and R900124.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900687.r21 and R900687.r21) * Info Set Connectivity transport (K900688.r21 and R900688.r21) * Row-level Security Definition transport (K900689.r21 and R900689.r21) * Cluster Definition transport (K900690.r21 and R900690.r21) * Authentication Helpers transport (K900691.r21 and R900691.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900692.r21 and R900692.r21) * Personalization transport (K900693.r21 and R900693.r21) * MDX Query Connectivity transport (K900694.r21 and R900694.r21) * ODS Connectivity transport (K900695.r21 and R900695.r21)

FP 3.1

There are two sets of transport files, which can be used with BusinessObjects Enterprise Integration Kit for SAP. One set is ANSI and the other set is Unicode enabled. The set of transports you must use depends on the BASIS system your SAP system is running on. Additionally, each transport consists of a data file and a cofile, which are listed in brackets behind the transport names. If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed

below: (These files are ANSI.) * Open SQL Connectivity transport (K900120.r22 and R900120.r22) * Info Set Connectivity transport (K900121.r22 and R900121.r22) * Row-level Security Definition transport (K900122.r22 and R900122.r22) * Cluster Definition transport (K900123.r22 and R900123.r22) * Authentication Helpers transport (K900124.r22 and R900124.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900687.r21 and R900687.r21) * Info Set Connectivity transport (K900688.r21 and R900688.r21) * Row-level Security Definition transport (K900689.r21 and R900689.r21) * Cluster Definition transport (K900690.r21 and R900690.r21) * Authentication Helpers transport (K900691.r21 and R900691.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900692.r21 and R900692.r21) * Personalization transport (K900705.r21 and R900705.r21) * ODS Connectivity transport (K900695.r21 and R900695.r21) If your SAP BW system has not applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900694.r21 and R900694.r21) If your SAP BW system has applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900007.R72 and R900007.R72)

FP 3.2

There are two sets of transport files, which can be used with BusinessObjects Enterprise Integration Kit for SAP. One set is ANSI and the other set is Unicode enabled. The set of transports you must use depends on the BASIS system your SAP system is running on. Additionally, each transport consists of a data file and a cofile, which are listed in brackets behind the transport names.

If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.) * Open SQL Connectivity transport (K900120.r22 and R900120.r22) * Info Set Connectivity transport (K900121.r22 and R900121.r22) * Row-level Security Definition transport (K900122.r22 and R900122.r22) * Cluster Definition transport (K900123.r22 and R900123.r22) * Authentication Helpers transport (K900124.r22 and R900124.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900687.r21 and R900687.r21) * Info Set Connectivity transport (K900688.r21 and R900688.r21) * Row-level Security Definition transport (K900689.r21 and R900689.r21) * Cluster Definition transport (K900690.r21 and R900690.r21) * Authentication Helpers transport (K900691.r21 and R900691.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900692.r21 and R900692.r21) * Personalization transport (K900705.r21 and R900705.r21) * ODS Connectivity transport (K900695.r21 and R900695.r21) If your SAP BW system has not applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900694.r21 and R900694.r21) If your SAP BW system has applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900007.R72 and R900007.R72)

FP 3.3


below: (These files are ANSI.) * Open SQL Connectivity transport (K900120.r22 and R900120.r22) * Info Set Connectivity transport (K900121.r22 and R900121.r22) * Row-level Security Definition transport (K900122.r22 and R900122.r22) * Cluster Definition transport (K900123.r22 and R900123.r22) * Authentication Helpers transport (K900124.r22 and R900124.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900687.r21 and R900687.r21) * Info Set Connectivity transport (K900688.r21 and R900688.r21) * Row-level Security Definition transport (K900689.r21 and R900689.r21) * Cluster Definition transport (K900690.r21 and R900690.r21) * Authentication Helpers transport (K900691.r21 and R900691.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900692.r21 and R900692.r21) * Personalization transport (K900705.r21 and R900705.r21) * ODS Connectivity transport (K900695.r21 and R900695.r21) If your SAP BW system has not applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900694.r21 and R900694.r21) If your SAP BW system has applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900007.R72 and R900007.R72)

FP 3.4


If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.) * Open SQL Connectivity transport (K900128.r22 and R900128.r22) * Info Set Connectivity transport (K900121.r22 and R900121.r22) * Row-level Security Definition transport (K900122.r22 and R900122.r22) * Cluster Definition transport (K900123.r22 and R900123.r22) * Authentication Helpers transport (K900124.r22 and R900124.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900732.R21 and R900732.R21) * Info Set Connectivity transport (K900688.r21 and R900688.r21) * Row-level Security Definition transport (K900689.r21 and R900689.r21) * Cluster Definition transport (K900690.r21 and R900690.r21) * Authentication Helpers transport (K900691.r21 and R900691.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900692.r21 and R900692.r21) * Personalization transport (K900705.r21 and R900705.r21) * ODS Connectivity transport (K900695.r21 and R900695.r21) If your SAP BW system has not applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900694.r21 and R900694.r21) If your SAP BW system has applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900007.R72 and R900007.R72)

FP 3.5


below: (These files are ANSI.) * Open SQL Connectivity transport (K900128.r22 and R900128.r22) * Info Set Connectivity transport (K900121.r22 and R900121.r22) * Row-level Security Definition transport (K900122.r22 and R900122.r22) * Cluster Definition transport (K900123.r22 and R900123.r22) * Authentication Helpers transport (K900124.r22 and R900124.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900732.R21 and R900732.R21) * Info Set Connectivity transport (K900688.r21 and R900688.r21) * Row-level Security Definition transport (K900689.r21 and R900689.r21) * Cluster Definition transport (K900690.r21 and R900690.r21) * Authentication Helpers transport (K900691.r21 and R900691.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900692.r21 and R900692.r21) * Personalization transport (K900705.r21 and R900705.r21) * ODS Connectivity transport (K900695.r21 and R900695.r21) If your SAP BW system has not applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900735.R21 and R900735.R21) If your SAP BW system has applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900034.R72 and R900034.R72)

FP 3.6

There are two sets of transport files, which can be used with BusinessObjects Enterprise Integration Kit for SAP. One set is ANSI and the other set is Unicode enabled. The set of transports you must use depends on the BASIS system your SAP system is running on. Additionally, each transport consists of a data file and a cofile, which are listed in brackets behind the transport names. If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below:

(These files are ANSI.) * Open SQL Connectivity transport (K900128.r22 and R900128.r22) * Info Set Connectivity transport (K900121.r22 and R900121.r22) * Row-level Security Definition transport (K900122.r22 and R900122.r22) * Cluster Definition transport (K900123.r22 and R900123.r22) * Authentication Helpers transport (K900124.r22 and R900124.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900732.R21 and R900732.R21) * Info Set Connectivity transport (K900688.r21 and R900688.r21) * Row-level Security Definition transport (K900689.r21 and R900689.r21) * Cluster Definition transport (K900690.r21 and R900690.r21) * Authentication Helpers transport (K900691.r21 and R900691.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900741.r21 and R900741.r21) * Personalization transport (K900705.r21 and R900705.r21) * ODS Connectivity transport (K900695.r21 and R900695.r21) If your SAP BW system has not applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900735.R21 and R900735.R21) If your SAP BW system has applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900047.R72 and R900047.R72)

FP 3.7


If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.) * Open SQL Connectivity transport (K900128.r22 and R900128.r22) * Info Set Connectivity transport (K900121.r22 and R900121.r22) * Row-level Security Definition transport (K900122.r22 and R900122.r22) * Cluster Definition transport (K900123.r22 and R900123.r22) * Authentication Helpers transport (K900124.r22 and R900124.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900754.R21 and R900754.R21) * Info Set Connectivity transport (K900688.r21 and R900688.r21) * Row-level Security Definition transport (K900689.r21 and R900689.r21) * Cluster Definition transport (K900690.r21 and R900690.r21) * Authentication Helpers transport (K900691.r21 and R900691.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900741.r21 and R900741.r21) * Personalization transport (K900705.r21 and R900705.r21) * ODS Connectivity transport (K900695.r21 and R900695.r21) If your SAP BW system has not applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900735.R21 and R900735.R21) If your SAP BW system has applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900047.R72 and R900047.R72)

FP 3.8


If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.) * Open SQL Connectivity transport (K900128.r22 and R900128.r22) * Info Set Connectivity transport (K900121.r22 and R900121.r22) * Row-level Security Definition transport (K900122.r22 and R900122.r22) * Cluster Definition transport (K900123.r22 and R900123.r22) * Authentication Helpers transport (K900124.r22 and R900124.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900754.R21 and R900754.R21) * Info Set Connectivity transport (K900767.r21 and R900767.r21) * Row-level Security Definition transport (K900689.r21 and R900689.r21) * Cluster Definition transport (K900690.r21 and R900690.r21) * Authentication Helpers transport (K900691.r21 and R900691.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900741.r21 and R900741.r21) * Personalization transport (K900705.r21 and R900705.r21) * ODS Connectivity transport (K900695.r21 and R900695.r21) If your SAP BW system has not applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900735.R21 and R900735.R21) If your SAP BW system has applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900047.R72 and R900047.R72)

Service Pack 4 There are two sets of transport files, which can be used with BusinessObjects Enterprise Integration Kit for SAP. One set is ANSI and the other set is Unicode enabled. The set of transports you must use depends on the BASIS system your SAP system is running on. Additionally, each transport consists of a data file and a cofile, which are listed in brackets behind the transport names. If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.)

* Open SQL Connectivity transport (K900128.r22 and R900128.r22) * Info Set Connectivity transport (K900121.r22 and R900121.r22) * Row-level Security Definition transport (K900122.r22 and R900122.r22) * Cluster Definition transport (K900123.r22 and R900123.r22) * Authentication Helpers transport (K900124.r22 and R900124.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900732.R21 and R900732.R21) * Info Set Connectivity transport (K900688.r21 and R900688.r21) * Row-level Security Definition transport (K900689.r21 and R900689.r21) * Cluster Definition transport (K900690.r21 and R900690.r21) * Authentication Helpers transport (K900691.r21 and R900691.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900722.r21 and R900722.r21) * Personalization transport (K900748.r21 and R900748.r21) * ODS Connectivity transport (K900695.r21 and R900695.r21) If your SAP BW system has not applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900744.r21 and R900744.r21) If your SAP BW system has applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900047.r72 and R900047.r72)

FP 4.1 There are two sets of transport files, which can be used with BusinessObjects Enterprise Integration Kit for SAP. One set is ANSI and the other set is Unicode enabled. The set of transports you must use depends on the BASIS system your SAP system is running on. Additionally, each transport consists of a data file and a cofile, which are listed in brackets behind the transport names. If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.) * Open SQL Connectivity transport (K900128.r22 and R900128.r22) * Info Set Connectivity transport (K900121.r22 and R900121.r22) * Row-level Security Definition transport (K900122.r22 and R900122.r22)

* Cluster Definition transport (K900123.r22 and R900123.r22) * Authentication Helpers transport (K900124.r22 and R900124.r22) If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900754.R21 and R900754.R21) * Info Set Connectivity transport (K900688.r21 and R900688.r21) * Row-level Security Definition transport (K900689.r21 and R900689.r21) * Cluster Definition transport (K900690.r21 and R900690.r21) * Authentication Helpers transport (K900691.r21 and R900691.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900741.r21 and R900741.r21) * Personalization transport (K900748.r21 and R900748.r21) * ODS Connectivity transport (K900695.r21 and R900695.r21) If your SAP BW system has not applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900744.r21 and R900744.r21) If your SAP BW system has applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900047.r72 and R900047.r72)

FP 4.2 There are two sets of transport files, which can be used with BusinessObjects Enterprise Integration Kit for SAP. One set is ANSI and the other set is Unicode enabled. The set of transports you must use depends on the BASIS system your SAP system is running on. Additionally, each transport consists of a data file and a cofile, which are listed in brackets behind the transport names. If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below: (These files are ANSI.) * Open SQL Connectivity transport (K900128.r22 and R900128.r22) * Info Set Connectivity transport (K900121.r22 and R900121.r22) * Row-level Security Definition transport (K900122.r22 and R900122.r22) * Cluster Definition transport (K900123.r22 and R900123.r22) * Authentication Helpers transport (K900124.r22 and R900124.r22)

If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below: (These files are Unicode enabled.) * Open SQL Connectivity transport (K900754.R21 and R900754.R21) * Info Set Connectivity transport (K900688.r21 and R900688.r21) * Row-level Security Definition transport (K900689.r21 and R900689.r21) * Cluster Definition transport (K900690.r21 and R900690.r21) * Authentication Helpers transport (K900691.r21 and R900691.r21) The following files must be used on an SAP BW system: (These files are Unicode enabled.) * Content Administration transport (K900741.r21 and R900741.r21) * Personalization transport (K900748.r21 and R900748.r21) * ODS Connectivity transport (K900695.r21 and R900695.r21) If your SAP BW system has not applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900744.r21 and R900744.r21) If your SAP BW system has applied SAP Note 1232751, you must use the file listed below: * MDX Query Connectivity transport (K900047.r72 and R900047.r72)

Documents

Transport Fileversions