Transfer Device Solutions - ACCESS HARDWAREaccesshardware.com/.../08/McKinney-Jan-2011-Pricebook.pdfA-2011 Price Book Supplement 1.51420 Transfer Device PB.indd 1 11/1/10 8:37:58 AM

Transfer Device Solutions

January 1, 2011A-2011 Price Book Supplement

1.51420 Transfer Device PB.indd 1 11/1/10 8:37:58 AM

PART # McKINNEYCatalog # Description:Net

Price

Max Hingerequired

(Not included)

3", 6" & 12" HarnessBetween hinge and the end of an exit device

93981 QC-C003QC12 - 3" Wire Harness; 8 & 4 Pin Connector w/12 wires (For Exit Device Rail Jumper to Hinge)

$8.12 QC12

93982 QC-C006QC12 - 6" Wire Harness; 8 & 4 Pin Connector w/12 wires (For Exit Device Rail Jumper to Hinge)

$8.50 QC12

93983 QC-C012QC12 - 12" Wire Harness; 8 & 4 Pin Connector w/12 wires(For Exit Device Rail Jumper to Hinge)

$11.24 QC12

2', 3' & 4' HarnessBetween hinge and through the door to the lockset or exit device trim

93984 QC-C200 QC12 - 26" Wire Harness; 8 & 4 Pin Connector w/12 Wires $12.62 QC12

93985 QC-C206 QC12 - 32" Wire Harness; 8 & 4 Pin Connector w/12 Wires $13.62 QC12

93986 QC-C300 QC12 - 38" Wire Harness; 8 & 4 Pin Connector w/12 wires $13.96 QC12



15' HarnessFrom the hinge location, up the jamb to the above the ceiling, or up and around a full lite or half lite metal door.

93989 QC-C1500 QC12 - 15' 2" Wire Harness; 8 & 4 Pin Connector w/12 Wires $31.46 QC12


McKINNEY ElectroLynx Harnesses & Components For Metal DoorsCORBIN RUSSWIN, SARGENT, and YALE

www.mckinneyhinge.com1-800-810-WIRE (9473)

If metal door, order a retrofit cable with Molex connectors on both ends.If the metal door is polystyrene filled or steel stiffened, the cable may need to be routed up and over the door.

Cop

yrig

ht ©

200

9-20

11, M

cKin

ney

Prod

ucts

Com

pany

, an

ASS

A A

BLO

Y G

roup

com

pany

. All

right

s re

serv

ed.

Rep

rodu

ctio

n in

who

le o

r in

part

with

out t

he e

xpre

ss w

ritte

n pe

rmis

sion

of M

cKin

ney

Prod

ucts

Com

pany

is p

rohi

bite

d.



PART # McKINNEYCATALOG # Description:Net

Price

Max Hingerequired

(Not included)

3", 6" & 12" HarnessBetween hinge and the end of an exit device

93990 QC-C003PQC12 - 3" Wire Harness; 8 & 4 Pin Connector w/12 wires (For Exit Device Rail Jumper to Hinge, Insert pre-pinned ends into plastic Molex connector)

$10.38 QC12


$10.76 QC12


$13.50 QC12

2', 3' & 4' HarnessBetween hinge and through the door to the lockset or exit device trim.

93993 QC-C200PQC12 - 26" Wire Harness; 8 & 4 Pin Connector w/12 wires (Insert pre-pinned ends into plastic Molex connector)

$14.88 QC12


$15.88 QC12


$16.22 QC12


$16.36 QC12


$16.62 QC12

15' HarnessFrom the hinge location, up the jamb to the above the ceiling, or up and around a full lite or half lite metal door.

93998 QC-C1500PQC12 - 15' 2" Wire Harness; 8 & 4 Pin Connector w/12 Wires (Termination in Field)

$33.72 QC12

McKINNEY ElectroLynx Harnesses & Components For Wood DoorsCORBIN RUSSWIN, SARGENT, and YALE

If wood door, order a retrofit cable with the Molex connector on one end, and pins crimped on the other end.

Cop

yrig

ht ©

200

9-20

11, M

cKin

ney

Prod

ucts

Com

pany

, an

ASS

A A

BLO

Y G

roup

com

pany

. All

right

s re

serv

ed.

Rep

rodu

ctio

n in

who

le o

r in

part

with

out t

he e

xpre

ss w

ritte

n pe

rmis

sion

of M

cKin

ney

Prod

ucts

Com

pany

is p

rohi

bite

d.




As part of their promise to provide innovative, fast and effective high security solutions to their customers, ASSA ABLOY Group brands offer ElectroLynx®, a universal quick-connect system that simplifies the electrification of the door opening.

ElectroLynx® is a registered trademark of ASSA ABLOY Inc.

PART # McKINNEYCATALOG # Description: Kit Application:Net

Price

Miscellaneous Kits

94034 QC-R001 Molex/Repair/Service Kit

Includes 2, 4, 8 Molex receptacles and plugs (Qty. 10 ea) and the corresponding terminals (100 of each type), extraction tool and pinning assembly guide. Customer must purchase Molex crimper separately.

$77.26

McKINNEY ElectroLynx Harnesses & ComponentsCORBIN RUSSWIN, SARGENT, and YALE

Miscellaneous Kits

94035 QC-R002Extraction Tool

$16.80

94036 QC-R003

Molex Hand Crimp Tool Molex tool used to attach terminals to wire

(stripped) ends $350.00

PART # McKINNEYCATALOG # Description: Kit Application:Net

Price

Receptacles and Terminals

94037 QC-RF2 Female Receptacle 2 CKT Quantity 1 Bag of 100 in Kit, Bag $18.80



94028 QC-RM2 Male Receptacle 2 CKT Quantity 1 Bag of 100 in Kit, Bag $20.00



94029 QC-FT2024 Female Terminal AWG 20-24 Quantity 1 Bag of 100 in Kit, Bag $7.80

94030 QC-FT2630 Female Terminal AWG 26-30 Quantity 1 Bag of 100 in Kit, Bag $7.80

93980 QC-MT2024 Male Terminal AWG 20-24 Quantity 1 Bag of 100 in Kit, Bag $7.80

94031 QC-MT2630 Male Terminal AWG 26-30 Quantity 1 Bag of 100 in Kit, Bag $7.80

94033 QC-DCC Pinning Assembly Guide Quantity 10 in Kit, Sold 1 Each $16.95

Locking mechanism

Male Plug (8 ckt)Female

Receptacle (8 ckt)

Door Cord and EPT

94002 MCK-TSB-C Door Cord Gray/Black Caps 18" Quantity 1 Each, Sold 1 Each $13.50

94003 MCK-TSB-CXL Door Cord Gray/Black Caps 36" Quantity 1 Each, Sold 1 Each $18.50

94004 MCK-EPT Electrical Power Transfer Quantity 1 Each, Sold 1 Each $31.50

94005 MCK-EPTL Electrical Power Transfer, Long Quantity 1 Each, Sold 1 Each $41.50

94006 MCK-EL-EPT ElectroLynx EPT -12 wire Quantity 1 Each, Sold 1 Each $50.00

94007 MCK-EL-EPTL ElectroLynx EPTL Long -12 wire Quantity 1 Each, Sold 1 Each $60.00

Quantity 1 Each, Sold one each


Cop

yrig

ht ©

200

9-20

11, M

cKin

ney

Prod

ucts

Com

pany

, an

ASS

A A

BLO

Y G

roup

com

pany

. All

right

s re

serv

ed.

Rep

rodu

ctio

n in

who

le o

r in

part

with

out t

he e

xpre

ss w

ritte

n pe

rmis

sion

of M

cKin

ney

Prod

ucts

Com

pany

is p

rohi

bite

d.


A

BC

Cable - CAT 5e, 26 AWG stranded, shielded, 100ohm

Cab

le -

CAT

5e,

24

AWG

stra

nded

, sh

ield

ed, 1

00oh

m, w

ith d

rain

wire

Frame side harness assembly(15ft length)

PoE Data Hinge

Ring terminal to be secured inside lock

Cable drain wire concealed in shrink tubing

Frame side Harness Assembly

PoE Door Harness AssemblyTwo 4-CKT lock mating connectors

Cable wires to be terminated in

Lock mating connectors are small enough to run through a 3/8" (min.) stile to stile door raceway.

field per lock instructions


McKINNEY ElectroLynx Power over Ethernet (PoE) Hinge & Harnesses

PART # McKINNEYCATALOG # Description:Net

Price

73695 4.5 x 4.5 TA2714 26D PoE Standard Weight 5 Knuckle $439.64

73696 4.5 x 4.5 T4A3786 26D PoE Heavy Weight 5 Knuckle $456.75

The door harness connectors are small enough to run through a 3/8" (minimum) stile-to-stile door raceway.*See the McKINNEY Catalog for additional finishes and hinge types.Note: One hinge, door harness and frame harness are required for each PoE opening.

NOTES: The PoE door & frame harnesses can accommodate a variety of new (with raceway) and retrofit applications.Connectors are small enough to run through a 3/8" (min.) stile-to-stile door raceway.Connects to intelligent Power over Ethernet electromechanical hardware from SARGEnT and CORBIn RuSSWIn.

Patent Pending

Cop

yrig

ht ©

200

9-20

11, M

cKin

ney

Prod

ucts

Com

pany

, an

ASS

A A

BLO

Y G

roup

com

pany

. All

right

s re

serv

ed.

Rep

rodu

ctio

n in

who

le o

r in

part

with

out t

he e

xpre

ss w

ritte

n pe

rmis

sion

of M

cKin

ney

Prod

ucts

Com

pany

is p

rohi

bite

d.


PART # McKINNEYCATALOG #Harness Length Application Description:

Net Price

Max Hingerequired

(Not included)

30", 36", 42", 48" & 54" Door Harnesses Between Hinge & PoE Lock

94022 PoE-C206P 30"20" to 25" door width (doors with 3 butt hinges with PoE hinge in center stile-to-stile raceway to lock prep).

$20.08 PoE


$20.56 PoE


$20.96 PoE


$21.50 PoE


$22.10 PoE

180" Frame Harness Between hinge and PoE Network Cable & Switch

94044 PoE-C1500P 180"From the hinge location, up the jamb to the wall/ceiling.

$23.50 PoE

PoE, Cat 5e, 26AWG,Shielded, Screened,100ohm, Door Harness Assembly






Consult the factory for additional items with PoE option.


McKINNEY Products Company • 225 Episcopal Road • Berlin • CT 06037 • Phone: 800.346.7707 • Fax: 800.541.1073 ASSA ABLOY Door Security Solutions Canada • 160 Four Valley Drive • Vaughan, Ontario • L4K 4T9 • Tel: 800.461.3007 • Fax: 905.738.2478 • www.assaabloy.ca

Founded in 1864, McKInnEY Products Company is a market leader in the manufacture of quality architectural grade hinges including security hinges, and continuous hinges for the builders’ hardware industry.

Copyright © 2009-2011, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited.

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience. 51420 1/11


GEN-1GENERAL INFORMATION

January 1, 2011

GEN-1

1.800.346.7707•PRICE

BOOKCopyright

©1988-2011,M

cKinney

Products

Company,an

ASSAABLOYGroup

company.A

llrightsreserved

.Reproduction

inwhole

orinpartwithout

theexpress

written

perm

issionofM

cKinney

Products

Company

isprohib

ited.

1/01/11

ACCEPTANCEMcKinney reserves the right to decline an order, in whole or in part, whenthe type or quantity of goods or credit worthiness of the Purchaser is notsatisfactory to us in our sole and absolute discretion.

Purchase Orders, Competitive Price Quotation ("CPQ") requests,Acknowledgements or the like issued by the Purchaser that have contrarystandard terms and conditions are not binding on McKinney, unless suchterms and conditions are approved in a separate written agreement byMcKinney authorized representatives. In the event of an acceptance ofPurchaser’s Purchase Order by McKinney, the Purchaser agrees that suchacceptance is solely conditioned on Purchaser’s acceptance of the termsand conditions set forth in this instrument, regardless of the terms andconditions specified in Purchaser’s Purchase Order. The terms andconditions in Purchaser’s Purchase Order which conflict with the terms andconditions of this instrument shall be disregarded and are hereby rejected,and this instrument shall constitute the entire agreement betweenMcKinney and the Purchaser

In the event that McKinney does not enforce or require strict performanceof any term or condition hereof, or any other document, instrument or otheragreement relating to goods sold, such lack of enforcement or requirementof strict performance will not waive, affect or diminish any right ofMcKinney to enforce or require strict performance of such term orcondition in the future.

PRICESAll prices are subject to change without notice and are not guaranteed.All shipments will be made at prices in effect at the time of shipment.

Possession of this price list does not constitute and agreement to sell.

We reserve the right to correct clerical, stenographic and other obviouserrors at any time.

TAXESIf under any law now or hereafter passed the seller is required to pay a taxon sales, or on an excise tax, the amount of these taxes will be added tothe invoice value.

DELIVERYSeller shall not be liable for any delay in delivery, or failure to deliver, dueto any cause beyond the Seller's control, including but not limited to fires,floods, strikes, or other labor disputes, accidents to machinery, acts ofsabotage, riots, precedence or priorities granted at the request or for thebenefit, directly or indirectly, of the federal or any provincial governmentor any subdivision or agency thereof, delay in transportation or lack oftransportation facilities, restrictions imposed by the federal, provincial orother governmental legislation or rules or regulations thereof.

CREDITAcceptance of orders and deliveries thereof shall at all times be subject toour approval of credit.

PAYMENT TERMSOrders based on quotations for specific jobs will be invoiced at prices ineffect on the date such orders are accepted. Other orders will be invoicedat prices in effect on the date of shipment.

Errors and omissions are subject to correction on acknowledgement whichin all circumstances supercedes all pricing shown herein.

Accounts are net cash 30 days or with 2% discount for cash if paid on orbefore the 10th of the month following the date of invoice.

A charge of $50.00 will be made for itemization. A charge of $25.00 will bemade when changes are requested on itemized jobs already processed.

No invoice will be rendered for less than $50.00 net.

On non-standard items a 5% over or under run constitutes a complete order.

TERMSIt is understood that McKinney may impose and charge a finance chargewhich is the lesser or one and one-half percent (1-1/2) per month of thehighest rate allowed by law on any amount which becomes past due anddelinquent. Additionally the Customer shall be responsible for all collectioncosts, court costs and reasonable attorney’s fees (where allowed by law)in connection with the recovery of any delinquent amount.

NOTE: PRICES PER EACH NET

PRODUCT WEIGHT INFORMATIONWeights indicated throughout this price list are approximate for brass,bronze or stainless steel base material. Aluminum base materials weighapproximately 1/3 the listed weights.

WARRANTYMcKinney products are not designed for or intended for aftermarketmodification. The warranty on McKinney products becomes void if theproduct is modified in any way, regardless of whether the modificationcauses or contributes to any alleged defect. Warranty voiding modificationsinclude, but are not limited to, third-party electrification of non-electricproducts and/or the installation of non-approved or non-McKinneycomponents.

If a McKinney product is modified it no longer meets industry certificationand quality control standards applicable to the original product and is nolonger a genuine McKinney product. A modified product may not be sold asa McKinney product and no McKinney trademarks or certification marksbased on the original McKinney product, such as (but not limited to) U.L. orANSI/BHMA marks, may appear anywhere on the modified product or onany packaging, literature or instructions sold with the modified product.

All original McKinney packaging and literature carries McKinneytrademarks and must be destroyed if the original McKinney product ismodified. Portions of the product that carry a McKinney trademark orcertification mark must be discarded and/or replaced by the party makingthe modification. U.L. and other certification testing and markings arealso the responsibility of the party making the modification. The use ofMcKinney trademarks on modified products constitutes trademarkinfringement.

TRADEMARKSMcKINNEY® is a registered trademark of McKinney Manufacturing Company.

Other product brand names may be trademarks or registered trademarksof their respective owners and are mentioned for reference purpose only.

McK.GEN PB2011:Layout 1 11/2/10 9:45 AM Page 1

GEN-2GENERAL INFORMATION

January 1, 2011

GEN-2

Copyright©1988-2011,McKinneyProductsCompany,anASSAABLOYGroupcompany.Allrightsreserved.

1.80

0.34

6.77

07•P

RICE

BOOK

ReproductioninwholeorinpartwithouttheexpresswrittenpermissionofMcKinneyProductsCompanyisprohibited.

1/01

/11

SHIPMENTSOnce in the hands of the Transportation Company, the Purchaser assumesthe risk of loss or damage in transit.

All goods are F.O.B. shipping point via the most economical routing,with carrier chosen by us. Full freight prepaid on shipments withinContinental United States having a net value of $1,250 or more. *SpringHinges and Contract Hinges may be combined with Continuous Gear Hinges,Threshold, Weatherstrip or Architectural Door Trim to meet freight prepaid.

If a different method of delivery is requested, the purchaser will beresponsible for any additional transportation charges.

Shipments by Air, Parcel Post, Bus or Express are F.O.B. factory with nofreight allowance. There will be a $25.00 surcharge on all bus or parcelpost shipments. Handling charges on UPS, Air Freight or common carriershipments may apply.

A charge of $15.00 will be made for notifying customers 24 hours inadvance of a truck delivery.

There will be a $25.00 charge for furnishing proof of delivery. This chargewill be cancelled if delivery was not made.

Orders marked WOG will be held for 10 days after being produced andthen shipped unless specifically marked for shipment with another P.O.

CANCELLATIONSWe are unable to accept cancellations or changes on non-stock and specialordered (s/o) items once processing begins. A charge will be assessedbased on manufacturing expense incurred.

RETURNED GOODSNo credit will be issued for returned goods unless such return isauthorized. If such authorization is given by us, there will be a minimumhandling charge of 45% or $50.00 which ever is greater, for stock itemsshipped within a 90 day period from the date of the request. Non stockmaterial (s/o) will be subjected to a minimum of 50% based upon selectapproval by the factory on an individual basis.

CLAIMSInspect before you sign. If there is a shortage or damage, accept shipmentonly after freight agent makes a damage or shortage notation on yourfreight bill, bill of lading, or delivery receipt. If damage or loss is evident,notify your freight agent and request inspection within 10 days ofreceipt of goods. Shipments are packed in approved containers. Claimsmust be made within 30 days of shipment and are subject to approval.Claims made after 30 days will not be honored. Our responsibility fordamage, visible or concealed, ceases upon delivery to the transportationcompany.

5 KNUCKLE BEARINGSWhile TA/ T4A part numbers are listed in this price book, TB/T4B isavailable at the same price listed.


GEN-3GENERAL INFORMATIONMCKINNEY AND B.H.M.A. FINISH SYMBOLS

January 1, 2011

GEN-3

1.800.346.7707•PRICE

BOOKCopyright

©1988-2011,M

cKinney

Products

Company,an

ASSAABLOYGroup

company.A

llrightsreserved

.Reproduction

inwhole

orinpartwithout

theexpress

written

perm

issionofM

cKinney

Products

Company

isprohib

ited.

1/01/11

B.H.M.A. Code Finish Description Base Material McKinney Equivalent600 Primed for Painting Steel USP

605 Bright Brass Brass US3

606 Dull Brass Brass US4

609 Dull Brass, Oxidized Brass US5

610 Brass, Nickel Oxidized, Bright Relieved Brass US7

611 Bright Bronze Bronze US9

612 Dull Bronze Bronze US10

613 Antiqued Bronze, Oiled Bronze US10B

616 Dull Bronze, Oxidized Bronze US11

618 Bright Nickel Plated Brass, Bronze US14

619 Dull Nickel Plated Brass, Bronze US15

620 Nickel Oxidized Relieved Brass, Bronze US15A

621 Half Polished Iron, Smooth Brass, Bronze US17A

623 Statuary Bronze, Light Bronze US20

624 Statuary Bronze, Dark Bronze US20A

625 Bright Chromium Brass, Bronze US26

626 Dull chromium Brass, Bronze US26D

629 Polished Stainless Steel Stainless Steel US32

300 Series

630 Dull Stainless Steel Stainless Steel US32D

300 Series

632 Bright Brass Steel US3

633 Dull Brass Steel US4

636 Dull Brass, Oxidized Steel US7

637 Bright Bronze Steel US9

639 Dull Bronze Steel US10

640 Antique Bronze, Oiled Steel US10B

643 Dull Bronze, Oxidized Steel US11

645 Bright Nickel Plated Steel US14

646 Dull Nickel Plated Steel US15

647 Nickel Oxidized Relieved Steel US15A

648 Half Polished Iron, Smooth Steel US17A

649 Statuary Bronze, Light Steel US20

650 Statuary Bronze, Dark Steel US20A

651 Bright Chromium Steel US26

652 Dull Chromium Steel US26D


GEN-4GENERAL INFORMATIONMcKINNEY AND GOVERNMENTFINISH SYMBOLS January 1, 2011

4-GEN


1.80

0.34

6.77

07•P

RICE

BOOK


1/01

/11

McKINNEY POWDER COAT FINISHES

U.S. Finish Description McKinney PriceU.S.P. Prime Powder Coat for Painting P Listed

U.S. 3 Bright Brass 3 Listed

U.S. 4 Dull Brass 4 Listed

U.S. 5 Dull Brass, Oxidized 5* P.O.A.

U.S. 7 Brass, Nickel Oxidized, Bright Relieved 7* P.O.A.

U.S. 9 Bright Bronze 9 P.O.A.

U.S. 10 Dull Bronze 10 Listed

U.S. 10A Antique Bronze, Oiled and Lacquered 10A Listed

U.S. 10B Antique Bronze, Oiled 10B Listed

U.S. 11 Dull Bronze, Oxidized 11* P.O.A.

U.S. 14 Bright Nickel Plated 14 P.O.A.

U.S. 15 Dull Nickel Plated 15 Same as 26D

U.S. 15A Nickel Oxidized Relieved 15A* P.O.A.

U.S. 17A Half Polished Iron, Smooth 17A* P.O.A.

U.S. 20 Statuary Bronze, Light 20* P.O.A.

U.S. 20A Statuary Bronze, Dark 20A* P.O.A.

U.S. 26 Bright Chromium 26 Listed

U.S. 26D Dull Chromium 26D Listed

U.S. 32 Polished Stainless Steel 32 Listed

U.S. 32D Dull Stainless Steel 32D Listed

Every effort is made by McKINNEY to furnish finishes which do comply with the Standard, however we cannotguarantee that our finish will match other manufacturers finish. Where a special finish or a matched finish isrequired, a sample must be submitted with the order.

* P.O.A. – Price on Application – Consult the factory for pricing on these custom finishes.

MicroShield Agion Antimicrobial 32DBIO POAAluminum AP ListedBeige PB Same as APGold PG Same as APGrey Tone GT Same as APTrue White PW Same as APBright Brass w/ Clear Powder Coat 3-C 20% over 26Dull Brass w/ Clear Powder Coat 4-C 20% over 26Dull Chrome Powder Coat CP Same as APChampagne Champagne P.O.A.*Dark Bronze Powder Coat D-3 Same as APBlack Powder Coat D-4 Same as APCustom Polymer Coating POA

* Check with the factory for availability and pricing on these finishes


GEN-5GENERAL INFORMATIONADDITIONS WHERE NOT LISTED

January 1, 2011

GEN-5

1.800.346.7707•PRICE

BOOKCopyright

©1988-2011,M

cKinney

Products

Company,an

ASSAABLOYGroup

company.A

llrightsreserved

.Reproduction

inwhole

orinpartwithout

theexpress

written

perm

issionofM

cKinney

Products

Company

isprohib

ited.

1/01/11

NO LOGO P.O.A.Hinges supplied less McKinney logo (not available on LISTED Hinges)

BLANK HINGES (No Screw Holes) P.O.A.Blank hinges regularly furnished without swaging (flat back) unless otherwise specified.

SPECIAL SWAGINGSpecial Swaging P.O.A.

EXTRA FOR STAINLESS STEEL BALLS AND RACEWAYS ONSTEEL, BRASS OR BRONZE BALL BEARING HINGES

on standard weight two ball bearing hinges Add $12.16 per hingeon heavy weight four ball bearing hinges Add $15.57 per hinge(on stainless steel hinges, stainless steel balls and raceways are standard)

BRASS suffix BR or STAINLESS PINS suffix SSP31⁄2" - 4" Add $5.50 each41⁄2" - 5" Add $7.54 each6" or larger Add $10.23 eachReplacement steel pins standard weight Add $0.83 eachReplacement steel pins heavy weight Add $1.16 each

Specify hinge type & finish when ordering pins

ELECTRIC HINGE ADDITIONS - BRASS, BRONZE OR STEEL BASEConcealed Circuit (CC Option) With Quick Connectors (QC Option)

Number of Wires Add Number ofWires Add2 Wires – suffix QC2 $160.80 per hinge

4 wires – suffix CC4 $169.80 per hinge 4 Wires – suffix QC4 $187.63 per hinge6 wires – suffix CC6 $178.70 per hinge 6 Wires – suffix QC6 $196.59 per hinge8 wires – suffix CC8 $196.50 per hinge 8 Wires – suffix QC8 $214.41 per hinge

10 Wires – suffix QC10 $241.24 per hinge12 Wires – suffix QC12 $268.02 per hinge

ELECTRIC HINGE ADDITIONS - STAINLESS STEEL BASEConcealed Circuit (CC Option)With Quick Connectors (QC Option)

Number of Wires Add Number ofWires Add2 Wires – suffix QC2 $187.42 per hinge

4 wires – suffix CC4 $232.30 per hinge 4 Wires – suffix QC4 $250.17 per hinge6 wires – suffix CC6 $250.17 per hinge 6 Wires – suffix QC6 $268.02 per hinge8 wires – suffix CC8 $268.02 per hinge 8 Wires – suffix QC8 $285.91 per hinge

10 Wires – suffix QC10 $312.72 per hinge12 Wires – suffix QC12 $339.21 per hinge

ELECTRIC HINGE ADDITIONS -Power over Ethernet (PoE Option)

AddBrass Bronze or Steel Base $425.00 per hingeStainless Steel Base $495.00 per hinge

Extra 6" Pig Tail for QC Option for butt hinges $10.73 Each per hingeExtra Long leads (over 12") 4 wires for CC option Add $3.58 per footExtra Long leads (over 12") 6 wires for CC option Add $5.12 per footExtra Long leads (over 12") 8 wires for CC option Add $6.66 per footMG16-2C Mortar Guard (Part #63333) $16.12 eachExtra heavy magnet & switch for MM hinges suffix MM x EHM Add $164.87 per hingeMagnetic monitoring suffix MM Add $149.16 per hingeMagnetic monitoring short switch suffix NS (11/4" minimum frame) Add $149.16 per hinge

Add $15.00 to CC or QC Option for Swing Clear Butt HInges

(see continuous hinge section forQC pigtails for continuous hinges)


GEN-6GENERAL INFORMATIONADDITIONS WHERE NOT LISTED

January 1, 2011

GEN-6


1.80

0.34

6.77

07•P

RICE

BOOK


1/01

/11

NON REMOVABLE DOOR Suffix NRDModerne Hinge only (2 Knuckle) Add $6.11 per door

NON REMOVABLE PINSSet screw in barrel suffix NRP Add $3.69 each

RAISED BARREL FULL MORTISE HINGES, BEARING HINGES ONLYRaised barrel prefix RB 41/2 x 41/2 Size 5 Knuckle only. Add $19.64 each

Hinges are NRP and reversible for handing

ROUND CORNER Prefix RC1/4" round corner full mortise only Add $ 4.71 each5/32" round corner full mortise 4

-1/2" or larger Add $ 4.71 each

Round corner hinges (RC) will be furnished in 1/4" radius unless otherwise specified.

BEVELED HINGES (where doors are beveled on hinge side specify as follows)For 2 knuckle and 3 knuckle hinges use 5000 series. Example TA793 or TA792 will become TA5793 or TA5792.For 2 knuckle and 5 knuckle hinges use a 4000 series. Example TA2714 or T4A3386 will become a TA4714 or T4A4386.TA2731 will become a TA4731, A TA3350 becomes a TA4350.

•Price remains the same as square edge hinge •Indicate hand when ordering

SAFETY STUD FEATURE Suffix SSF Add $11.01 each

PRISON SAFETY FEATURE Suffix PSF* Add $13.04 each*available on HTA786 or HTA386 (32D) only

SLIP IN HINGES Suffix SIH Type I (Handed), SIH Type IIRegular weight bearing hinge only Add $23.47 each

indicate hand when ordering

SPECIAL SCREWS (1/2 x 12-24 machine - 11/4 x 12 wood)*Spanner heads suffix SHS, machine screws provided. Wood screws by request onlySteel $0.80 eachBrass $1.10 eachStainless Steel $2.11 eachSpanner bit holder tool $31.03 eachSpanner bit (for use in holder) $21.08 eachTORX Pin head security screws - Suffix TXS, machine screws provided. Wood screws by request onlySteel $0.87 eachStainless $1.10 each#20 - 1/2X12-24 & 1-1/4 x 12 wood screw#25 - 1/2x1/4-20 machine screw, 1-1/2x12 wood screwTORX bit $21.57 eachTORX bit holder tool $31.03 each*Consult factory for price and minimum requirements on additional sizes.

Contract grade hinges are packed all machine x all wood screws

TIPSHOSPITAL TIPS Prefix H

Regular weight plain bearing, oil impregnated or ball Add $18.13 eachHeavy weight oil impregnated or ball Add $18.13 eachSolid Brass BALL TIPS suffix x BT up to 6" in height Add $19.666 eachSolid Brass STEEPLE TIPS suffix x ST up to 6" in height Add $19.66 each

Architectural Hardware Finish Presentation Folder FS86 $55.00 netArchitectural Hardware Hinge Display Board 81208 $596.66 net

Perforated cardboard shims $7.70 per hundred


GEN-7GENERAL INFORMATIONTABLE OF CONTENTS

January 1, 2011

GEN-7

1.800.346.7707•PRICE

BOOKCopyright

©1988-2011,M

cKinney

Products

Company,an

ASSAABLOYGroup

company.A

llrightsreserved

.Reproduction

inwhole

orinpartwithout

theexpress

written

perm

issionofM

cKinney

Products

Company

isprohib

ited.

1/01/11

Full Mortise Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FM-1–FM-63

Electric Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EL-1–EL-18

Full Mortise Anchor Hinge Sets . . . . . . . . . . . . . . . . . . . . . . . . .FMA-1–FMA-14

Half Mortise Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HM-1–HM-10

Half Surface Hinges and Back Plates . . . . . . . . . . . . . . . . . . . . .HS-1–HS-12

Full Surface Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FS-1–FS-12

Spring Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP-1–SP-12

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GEN-1–GEN-5

MacPro Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FM62–FM63, SP-3

Pivots & Miscellaneous Hardware . . . . . . . . . . . . . . . . . . . . . . .MISC-1–MISC-2

Filler Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MISC-3-MISC-4

Face Fillers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MISC-4

Hinge reinforcements & Shims . . . . . . . . . . . . . . . . . . . . . . . . . .MISC-5

Power Transfer Locator Templates . . . . . . . . . . . . . . . . . . . . . . .CG-26-CG27

Specialty Hinges and Miscellaneous . . . . . . . . . . . . . . . . . . . . . .SPEC-1–SPEC-2

Designer Hardware - Deco Tips . . . . . . . . . . . . . . . . . . . . . . . . .DH-1-DH-6

Residential Grade Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RES-1–RES-3

StormPro Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SPEC-1

Aluminum Continuous Hinges . . . . . . . . . . . . . . . . . . . . . . . . . .CG-1–CG-8

Stainless Steel Continuous Hinges . . . . . . . . . . . . . . . . . . . . . . .CG-9–CG-15

Stainless Steel Door Edge Guards . . . . . . . . . . . . . . . . . . . . . . . .CG-24–CG-25

Steel Continuous Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CG-17–CG-23


GEN-8GENERAL INFORMATIONINDEX

January 1, 2011

GEN-8


1.80

0.34

6.77

07•P

RICE

BOOK


1/01

/11

35 . . . . . . . . . . . . . . .Discontinued451 . . . . . . . . . . . . . .SP-4452 . . . . . . . . . . . . . .SP-4453 . . . . . . . . . . . . . .SP-41001 . . . . . . . . . . . . .SP-5, SP-61400 . . . . . . . . . . . . .RES-11414 . . . . . . . . . . . . .RES-21458 . . . . . . . . . . . . .RES-31502, 1502R . . . . . .SP-11522 . . . . . . . . . . . . .SP-21552 . . . . . . . . . . . . .SP-21572 . . . . . . . . . . . . .SP-33001 . . . . . . . . . . . . .SP-84007-MRB . . . . . . .SP-94007RB . . . . . . . . . .SP-98007 . . . . . . . . . . . . .SP-109001 . . . . . . . . . . . . .SP-619001 . . . . . . . . . . . .SP-6BP-10 . . . . . . . . . . .HS-12BP-11 . . . . . . . . . . . .HS-12BP-12 . . . . . . . . . . .HS-12CS1 . . . . . . . . . . . . .SP-4CSS-9 . . . . . . . . . . .MISC-1DLS-8 . . . . . . . . . . .MISC-1DS-6 . . . . . . . . . . . .MISC-1EG308 . . . . . . . . . . .CG-26EG-C308 . . . . . . . . .CG-26EG-T308 . . . . . . . . .CG-26EP-5J . . . . . . . . . . . .MISC-2ET HINGES . . . . . .FM-12–FM-20H8007 . . . . . . . . . . .SP-10HS1001 . . . . . . . . . .SP-7HS3703 . . . . . . . . . .CG-25HTA386 . . . . . . . . . .FM-4HTA714 . . . . . . . . . .FM-8HTA786 . . . . . . . . . .FM-10HTA2714 . . . . . . . . .FM-22HTB386 . . . . . . . . . .FM-4HTB786 . . . . . . . . . .FM-10ICHTB386 . . . . . . . .DiscontinuedJ3001 . . . . . . . . . . . .SP-8MCK-12HD . . . . . .CG-3MCK-14HD . . . . . .CG-4MCK-22HD . . . . . .CG-5MCK-25HD . . . . . .CG-6MCK-54HD . . . . . .CG-8MCK-58HD . . . . . .CG-9MCK-WTHD . . . . .CG-3MCK-FM300 . . . . .CG-16MCK-FM327 . . . . .CG-19MCK-FM3500 . . . .CG-23MCK-FS301 . . . . . .CG-20MCK-FS302 . . . . . .CG-21MCK-FS309 . . . . . .CG-21MCK-FS321 . . . . . .CG-22MCK-FS3501 . . . . .CG-23MCK-FS3502 . . . . .CG-24MCK-FM3700 . . . .CG-25MCK-FS3701 . . . . .CG-25

MCK-FS3702 . . . . .CG-25MCK-HG305 . . . . .CG-16MCK-HG306 . . . . .CG-19MCK-HG310 . . . . .CG-22MCK-HG311 . . . . . .CG-20MCK-HG315 . . . . .CG-17MCK-HG322 . . . . .CG-17MCK-HG323 . . . . .CG-18MCK-HG326 . . . . .CG-18MCK-HM304 . . . . .CG-19MG-16 . . . . . . . . . . .GEN-4MP79 . . . . . . . . . . . .FM62MPB79 . . . . . . . . . .FM63MPS60 . . . . . . . . . . .SP-3MPS679 . . . . . . . . . .FM-63MPS68 . . . . . . . . . . .FM-63MPS91 . . . . . . . . . . .FM-63MPS99 . . . . . . . . . . .FM-63PH-4 . . . . . . . . . . . .SPEC-1SP3786 . . . . . . . . . .SPEC-1SP3386 . . . . . . . . . .SPEC-1T714 . . . . . . . . . . . .FM-5, FM-6T2314 . . . . . . . . . . .FM-21, FM-22T2714 . . . . . . . . . . .FM-26, FM-27T2731 . . . . . . . . . . .FM-31–FM-33T2772 . . . . . . . . . . .HS-5T2774 . . . . . . . . . . .HM-5TA314 . . . . . . . . . . .FM-1, FM-2TA371 . . . . . . . . . . .FS-1TA372 . . . . . . . . . . .HS-1TA374 . . . . . . . . . . .HM-1TA381 . . . . . . . . . . .FS-2TA382 . . . . . . . . . . .HS-2TA384 . . . . . . . . . . .HM-2TA386 . . . . . . . . . . .FM-3TA391 . . . . . . . . . . .FMA-1TA392 . . . . . . . . . . .FMA-2TA393 . . . . . . . . . . .FMA-3TA394 . . . . . . . . . . .FMA-4TA714 . . . . . . . . . . .FM-7, FM-8TA771 . . . . . . . . . . .FS-3TA772 . . . . . . . . . . .HS-3TA774 . . . . . . . . . . .HM-3TA781 . . . . . . . . . . .FS-4TA782 . . . . . . . . . . .HS-4TA784 . . . . . . . . . . .HM-3TA786 . . . . . . . . . . .FM-9TB786 . . . . . . . . . . .FM-10TA789 . . . . . . . . . . .HM-4TA791 . . . . . . . . . . .FMA-8TA792 . . . . . . . . . . .FMA-9TA793 . . . . . . . . . . .FMA-10TA794 . . . . . . . . . . .FMA-11TA797 . . . . . . . . . . .FS-5TA795 . . . . . . . . . . .FM-11TA796 . . . . . . . . . . .HS-4TA2314 . . . . . . . . . .FM-23, FM-24TA2395 . . . . . . . . . .FM-25TA2398 . . . . . . . . . .FM-25

TA2714 . . . . . . . . . .FM-28, FM-29TA2731 . . . . . . . . . .FM-33–FM-36TA2771 . . . . . . . . . .FS-6TA2772 . . . . . . . . . .HS-5TA2774 . . . . . . . . . .HM-5TA2798 . . . . . . . . . .FM-37, FM-38TA2895 . . . . . . . . . .FM-39TA3313 . . . . . . . . . .FM-39, FM-40TA3331 . . . . . . . . . .FM-41–FM-44TA3350 . . . . . . . . . .FM-45, FM-46TA3374 . . . . . . . . . .HM-6TA3713 . . . . . . . . . .FM-52TA3750 . . . . . . . . . .FM-52, FM-53TA5392 . . . . . . . . . .FMA-5TA5393 . . . . . . . . . .FMA-6TA5394 . . . . . . . . . .FMA-7TA5792 . . . . . . . . . .FMA-12TA5793 . . . . . . . . . .FMA-13TA5794 . . . . . . . . . .FMA-14TA2314BT . . . . . . . .FM-16TA2314ST . . . . . . . .FM-16TCA2314 . . . . . . . . .FM-25TCA2714 . . . . . . . . .FM-30TCA2771 . . . . . . . . .FS-6TCA2772 . . . . . . . . .HS-6TCA2774 . . . . . . . . .HM-5TCA3374 . . . . . . . . .HM-6TCA3381 . . . . . . . . .FS-8TCA3382 . . . . . . . . .HS-8TCA3384 . . . . . . . . .HM-8TCA3386 . . . . . . . . .FM-49TCA3781 . . . . . . . . .FS-11TCA3782 . . . . . . . . .HS-10TCA3784 . . . . . . . . .HM-10TCA3786 . . . . . . . . .FM-59T4A3381 . . . . . . . . .FS-7T4A3382 . . . . . . . . .HS-7T4A3384 . . . . . . . . .HM-7T4A3385 . . . . . . . . .FS-9 DiscontinuedT4A3386 . . . . . . . . .FM48-FM51T4A3395 . . . . . . . . .FM-51T4A3781 . . . . . . . . .FS-10T4A3782 . . . . . . . . .HS-9T4A3784 . . . . . . . . .HM-9T4A3785 . . . . . . . . .FS-12 DiscontinuedT4A3786 . . . . . . . . .FM-54–FM-57T4A3795 . . . . . . . . .FM-60T4A3796 . . . . . . . . .HS-11T4A3797 . . . . . . . . .FS-12T4A3789 . . . . . . . . .HM-10T4A4795 . . . . . . . . .FM-60T4A4895 . . . . . . . . .FM-61T6A3386 . . . . . . . . .FM-48T6A3786 . . . . . . . . .FM-58


GEN-9GENERAL INFORMATIONTOP TEN ORDERING TIPS

January 1, 2011

GEN-9

1.800.346.7707•PRICE

BOOKCopyright

©1988-2011,M

cKinney

Products

Company,an

ASSAABLOYGroup

company.A

llrightsreserved

.Reproduction

inwhole

orinpartwithout

theexpress

written

perm

issionofM

cKinney

Products

Company

isprohib

ited.

1/01/11

1. Clarity• If we canʼt read your order, chances are it may be

processed incorrectly• Check the font sizes of your address, phone and fax

numbers. A font size of 12 is recommended foryour order

2. Processing Information• A valid purchase order number is necessary to

process your order• Please be sure to include your account number,

Bill to and Ship to address, any special markings orspecial packing instructions

• Include your requested method of shipping• Include your requested shipping date• It is important for you to sign or list your name on the

purchase order in case we need to contact youabout your order

3. Pricing• Is this order based upon your standard buying

program• If this order is based upon a quotation, please

include quotation number so that we may properlyprice your order

4. Type of Hinge• Full Mortise, Half Mortise, Full Surface, Half Surface• Standard Weight, Heavy Weight• Bearing, Non Bearing• Ferrous, Non Ferrous• Butt, Spring Hinge, Continuous Hinge, Pivot

5. Size• We carry butt hinges in sizes from 3-1/2" x 3-1/2"

up to 8" x 8"• Height is the first dimension• Width is the second dimension• Wide throw hinges are available up to 8" in width• Continuous Hinges are available in sizes from 79" to

120" (or custom sized below these lengths)• Door Edge Guards are available in sizes up to 120"

6. Finish• McKinney Provides all BHMA Standard Finishes as

well as McKinney Powder Coat Finishes

7. Handing• 2-Knuckle Hinges, CS- Electric Hinges, Anchor

Hinges, continuous hinges with electricalmodification, PT prep or custom cut

• CSS-9 Combination Strike & Stop and the DLS-8Double Lipped Strike are prepared for either centeror offset hung applications. This must be specifiedalong with the size.

8. Options• Options listed in the General Information Section of

the Price Book are available on most Full Mortisehinges, however, we list available options for eachhinge on the individual catalog page. Refer to thecatalog page to be sure the option you are specifyingis available on the particular hinge you want.

• For PT prep on Continuous Hinges, please providethe model of the unit we need to prepare for as wellas the dimension FROM THE TOP OF THE HINGEDOWN. Your order cannot be processed without thespecific dimensions either to the top of the cut outor the center line of the cut out. We also need thehanding for these units. Please fill out and faxthe PT templates with your order. See pages CG26and CG27 for these templates.

• Electric Options for Continuous Hinges need tospecify number of wires and handing, along withthe location of the electrical prep from the top of thehinge to the centerline of the prep. All electriccontinuous hinges are supplied with a 4-amp fuse.Not installing this fuse voids the warranty.

9. Customization• Consult the factory regarding any customization.

10.EDI — ELECTRONICALLY TRANSMITTED ORDERS• Have you considered our EDI option?• McKINNEY EDI is available• Please consult the factory for further information

We appreciate your orders with or without questions!Our goal is to provide you with the best service in this industry!

Reducing the frequency of question orders allows us to better serve you!


STEEL HINGESFull Mortise Standard Weight,Five Knuckle3 1/2X3 1/2 T2714 10B3 1/2X3 1/2 T2714 26D4X4 T2714 10B4 1/2X4 TA2714 26D4 1/2X4 1/2 T2714 P4 1/2X4 1/2 T2714 10B4 1/2X4 1/2 T2714 264 1/2X4 1/2 T2714 26D4 1/2X4 1/2 T2714 26D NRP4 1/2X4 1/2 TA2714 P4 1/2X4 1/2 TA2714 P NRP4 1/2X4 1/2 TA2714 34 1/2X4 1/2 TA2714 44 1/2X4 1/2 TA2714 104 1/2X4 1/2 TA2714 10B4 1/2X4 1/2 TA2714 264 1/2X4 1/2 TA2714 26D4 1/2X4 1/2 TA2714 26D NRP5X4 1/2 TA2714 26D

Full Mortise Standard Weight,Three Knuckle4 1/2X4 1/2 TA714 26D

Full Mortise Heavy Weight,Five Knuckle4 1/2X4 1/2 T4A3786 10B4 1/2X4 1/2 T4A3786 26D4 1/2X4 1/2 T4A3786 26D NRP5X4 1/2 T4A3786 P5X4 1/2 T4A3786 P NRP5X4 1/2 T4A3786 26D5X4 1/2 T4A3786 26D NRP

MacPro SeriesFull Mortise Standard Weight4 1/2x4 1/2 MP79 34 1/2X4 1/2 MP79 44 1/2X4 1/2 MP79 4 NRP4 1/2x4 1/2 MP79 264 1/2X4 MP79 P NRP4 1/2X4 MPB79 26D4 1/2X4 1/2 MP79 26D NRP4 1/2X4 MPB79 44 1/2X4 MPB79 4 NRP4 1/2X4 MPB79 P4 1/2X4 MPB79 P NRP4 1/2X4 1/2 MP79 26D4 1/2X4 1/2 MP79 26D NRP4 1/2X4 1/2 MP79 44 1/2X4 1/2 MP79 4 NRP4 1/2X4 1/2 MP79 P4 1/2X4 1/2 MPB79 26D4 1/2X4 1/2 MPB79 26D NRP4 1/2X4 1/2 MPB79 P4 1/2X4 1/2 MPB79 P NRP4 1/2x4 1/2 MPB91 32D4 1/2x 4 1/2 MPB91 32D NRP

MacPro SeriesFull Mortise Heavy Weight4 1/2X4 1/2 MPB68 26D4 1/2X4 1/2 MPB68 26D NRP4 1/2X4 1/2 MPB99 32D4 1/2X4 1/2 MPB99 32D NRP

NON-FERROUSFull Mortise Standard Weight,Five Knuckle4 1/2x4 1/2 TA2314 10B4 1/2x4 1/2 TA2314 26D4 1/2x4 1/2 TA2314 26D NRP4 1/2x4 1/2 TA2314 32D4 1/2x4 1/2 TA2314 32D NRP

NON-FERROUSFull Mortise Heavy Weight,Five Knuckle4 1/2X4 1/2 T4A3386 32D4 1/2X4 1/2 T4A3386 32D NRP

Double Acting Spring Hinges& Pivots4 HS1001 26D4 1001 2C5 1001 26D6 1001 2C6 1001 26D6x4 1/2 1001 P6x4 1/2 1001 2C6x4 1/2 1001 26D6x4 1/2 1001 10A8 9001 26DJ3001 26D4007 RB 26D4007 MRB 26D

These items are in stock at 1600 12TH Street, NE, Mason City, IA 50401.Phone 641-494-1683 Fax 641-422-1965.Pick up orders must be placed by noon.

Mason City Stock List - January 2011

1/01/111.800.346.7707

•PRICEBOOK

Copyright

©1988-2011,M

cKinney

Products

Company,an

ASSAABLOYGroup

company.A

llrightsreserved

.Reproduction

inwhole

orinpartwithout

theexpress

written

perm

issionofM

cKinney

Products

Company

isprohib

ited.

4.McK Price Book 2011:McKinney Price Book 2003 11/2/10 9:38 AM Page 1

STEEL HINGESFull Mortise Standard Weight,Two Knuckle4 1/2X4 T2731 D3 RH4 1/2X4 T2731 D3 LH4 1/2X4 T2731 D4 RH4 1/2X4 T2731 D4 LH4 1/2X4 T2731 26 LH4 1/2X4 T2731 26 RH4 1/2X4 T2731 26D RH4 1/2X4 T2731 26D LH4 1/2X4 TA2731 D3 RH4 1/2X4 TA2731 D3 LH4 1/2X4 TA2731 26D RH4 1/2X4 TA2731 26D LH4 1/2X4 1/2 T2731 26D RH4 1/2X4 1/2 T2731 26D LH4 1/2X4 1/2 TA2731 26D RH4 1/2X4 1/2 TA2731 26D LH

Full Mortise Standard Weight,Three Knuckle3 1/2X3 1/2 TA714 26D3 1/2X3 1/2 TA714 154X4 TA714 26D4 1/2X4 TA714 154 1/2X4 1/2 T714 26D4 1/2X4 TA714 26D4 1/2X4 TA714 10B4 1/2X4 TA714 264 1/2 X 4 TA714 26D ET4 1/2X4 1/2 TA714 26D4 1/2X4 1/2 TA714 P4 1/2X4 1/2 TA714 104 1/2X4 1/2 TA714 10B4 1/2X 4 1/2 TA714 154 1/2X4 1/2 TA714 264 1/2X4 1/2 TA714 34 1/2X4 1/2 TA714 10A4 1/2X4 1/2 TA714 26D NRP4 1/2X4 1/2 TA714 26D ET4 1/2X4 TA714 26D NRP4 1/2X4 1/2 TA714 26D NRP5X4 1/2 TA714 26D5X4 TA714 26D

Full Mortise Standard Weight,Five Knuckle3 1/2X3 1/2 T2714 153 1/2X3 1/2 T2714 P3 1/2X3 1/2 T2714 33 1/2X3 1/2 T2714 26D3 1/2X3 1/2 T2714 104 1/2 X 4 RCTA2714 D4 NRP4 1/2X4 1/2 T2714 10B4 1/2X4 1/2 T2714 P4 1/2X4 1/2 T2714 P NRP4 1/2X4 1/2 T2714 154 1/2X4 1/2 T2714 264 1/2X4 1/2 T2714 26D4 1/2X4 1/2 T2714 10A4 1/2X4 1/2 T2714 44 1/2X4 1/2 T2714 34 1/2X4 1/2 T2714 104 1/2X4 1/2 T2714 26D NRP

4 1/2X4 1/2 T2714 D44 1/2X4 1/2 TA2714 D44 1/2X4 1/2 TA2714 P4 1/2X4 1/2 TA2714 P NRP4 1/2X4 1/2 TA2714 4 NRP4 1/2X4 1/2 TA2714 44 1/2X4 1/2 TA2714 34 1/2X4 1/2 TA2714 10A4 1/2X4 1/2 TA2714 104 1/2X4 1/2 TA2714 10 NRP4 1/2X4 1/2 TA2714 3 NRP4 1/2X4 1/2 TA2714 154 1/2X4 1/2 TA2714 264 1/2X4 1/2 TA2714 26 NRP4 1/2X4 1/2 TA2714 26D4 1/2X4 1/2 TA2714 26D NRP4 1/2X4 1/2 TA2714 10B4 1/2X4 1/2 TA2714 10B NRP4 1/2X4 1/2 TB2714 26D4 1/2X4 1/2 TB2714 26D NRP4 1/2X4 TCA2714 26D4 1/2X4 1/2 TCA2714 26D5X4 TA2714 26D5X4 1/2 T2714 26D5X4 1/2 TA2714 105X4 1/2 TA2714 26D5X4 1/2 TA2714 155X4 1/2 TA2714 10B5X4 1/2 TA2714 26D NRP5X5 TA2714 26D5X5 TA2714 10B

Full Mortise Heavy Weight,Three Knuckle4 1/2X4 1/2 TA786 104 1/2X4 1/2 TA786 10B4 1/2X4 1/2 TA786 154 1/2X4 1/2 TA786 NRP 154 1/2X4 1/2 TA786 26D4 1/2X4 1/2 TA786 26D NRP5X4 1/2 TA786 26D5X5 TA786 26D

Full Mortise Heavy Weight,Five Knuckle4 1/2X4 1/2 T4A3786 34 1/2X4 1/2 T4A3786 44 1/2X4 1/2 T4A3786 10B4 1/2X4 1/2 T4A3786 10A4 1/2X4 1/2 T4A3786 154 1/2X4 1/2 T4A3786 P4 1/2X4 1/2 T4A3786 264 1/2X4 1/2 T4A3786 104 1/2X4 1/2 T4A3786 26D4 1/2X4 1/2 T4A3786 10B4 1/2X4 1/2 T4A3786 P NRP4 1/2X4 1/2 T4A3786 26D4 1/2X4 1/2 T4B3786 26D4 1/2X4 1/2 T4B3786 26D4 1/2X4 1/2 T4A3786 26D4 1/2X4 1/2 T4A3786 264 1/2X4 1/2 TCA3786 26D5X4 1/2 T4A3786 P5X4 1/2 T4A3786 26D5X4 1/2 T4A3786 10

5X4 1/2 T4A3786 26D NRP5X4 1/2 T4A3786 10A5X4 1/2 T4A3786 10B5X4 1/2 T4A3786 265X4 1/2 T4B3786 26D5X4 1/2 T4A3786 155X5 T4A3786 26D5X5 T4A3786 10B

Full Mortise Standard Weight,Swing Clear4 1/2 TA2895 26D4 1/2 TA4895 26D

Full Mortise Heavy Weight,Swing Clear4 1/2 TA795 26D5 TA795 26D4 1/2 T4A3795 26D4 1/2 T4A4795 26D5 T4A3795 26D5 T4A3796 26D5 T4A4795 26D

Full Mortise Hospital Tip4 1/2X4 HTA714 26D4 1/2X4 1/2 HTA714 26D4 1/2X4 HTA786 26D4 1/2X4 1/2 HTA2714 26D5X4 1/2 HTA2714 26D4 1/2X4 1/2 HT4A3786 26D5X4 1/2 HT4A3786 26D

Full Mortise Anchor Sets5X4 1/2 TA792 26D RH5X4 1/2 TA792 26D LH5X4 1/2 TA5792 26D RH5X4 1/2 TA5792 26D LH

Half Mortise Standard Weight4 1/2 TA2774 P4 1/2 TA2774 26D

Half Surface4 1/2 TA772 26D4 1/2 TA2772 P4 1/2 TA2772 26D5 TA2772 26D5 T4A3782 26D6 T4A3782 26D 2 1/4 DR4 1/2 T4A3782 26D6 T4A3782 26D 1 3/4 DR

Back Plates for Half Surface4 1/2 BP-10 26D

Electric Hinges4 1/2X4 TA714 26D CC44 1/2X4 1/2 TA714 26D CC44 1/2X4 TA2714 26D CC44 1/2X4 1/2 TA2714 26D CC45X4 1/2 T4A3786 26D CC44 1/2 X 4 1/2 TA2714 26D CC64 1/2 X 4 TA2714 26D CC84 1/2X4 1/2 TA2714 26D CC85 X 4 1/2 T4A3786 26D CC84 1/2 X 4 1/2 TA2714 26D QC4

Berlin Stock List - January 2011

1/01/111.800.346.7707

•PRICEBOOK

Copyright

©1988-2011,M

cKinney

Products

Company,an

ASSAABLOYGroup

company.A

llrightsreserved

.Reproduction

inwhole

orinpartwithout

theexpress

written

perm

issionofM

cKinney

Products

Company

isprohib

ited.

These items are in stock at 225 Episcopal Road, Berlin CT 06037Phone 800-346-7707 - Fax 800-541-1073.Pick up orders must be placed by noon.

Continued...



1.800.346.7707•PRICEBOOK


1/01/11These items are in stock at 225 Episcopal Road, Berlin CT 06037Phone 800-346-7707 - Fax 800-541-1073.Pick up orders must be placed by noon.

Berlin Stock List - January 2011

4 1/2 X 4 1/2 T4A3786 26D QC44 1/2 X 4 1/2 TA2714 26D QC64 1/2 X 4 1/2 T4A3786 26D QC64 1/2 X 4 1/2 TA2714 26D QC84 1/2 X 4 1/2 T4A3786 26D QC85X4 1/2 T4A3786 26D QC84 1/2 X 4 1/2 TA2714 26D QC12

Wire Harness Transfer DevicesQC-RM4 MALE PLUG (4CKT)QC-RM8 MALE PLUG (8CKT)QC-MT2024 MALE TERMINRPAL

(AWG 20-24)QC-C003 12 WIRE 22AWG 3 INCH-QC-C006 12 WIRE 22AWG 6 INCH-QC-C012 12 WIRE 22AWG 12 INCH-QC-C200 12 WIRE 22AWG 26 INCH-QC-C206 12 WIRE 22AWG 32 INCH-QC-C300 12 WIRE 22AWG 38 INCH-QC-C306 12 WIRE 22AWG 44 INCH-QC-C400 12 WIRE 22AWG 50 INCH-QC-C1500 12 WIRE 22AWG 15 FT,2 INCH-QC-C003P 12 WIRE AWG 3 INCH-QC-C006P 12 WIRE AWG 6 INCH-QC-C012P 12 WIRE 22AWG 12 INCH-QC-C200P 12 WIRE 22AWG 26 INCH-QC-C206P 12 WIRE 22AWG 32 INCH-QC-C300P 12 WIRE 22AWG 38 INCH-QC-C306P 12 WIRE 22AWG 44 INCH-QC-C400P 12 WIRE 22AWG 50 INCH-QC-C1500P 12WIRE 22AWG 15 FT,2 INCH-

Full Mortise Single Acting Spring4 1/2X4 1502 154 1/2X4 1502 26D4 1/2X4 1502 264 1/2X4 1/2 1502 P4 1/2X4 1/2 1502 104 1/2X4 1/2 1502 10B4 1/2X4 1/2 1502 154 1/2X4 1/2 1502 26D4 1/2X4 1/2 1502 264 1/2X4 1/2 1502 34 1/2X4 1/2 1522 26D

Steel Door Spring451 D4452 D4453 D4

Miscellaneous

CSS-9 5 3/4 26D Center HungCSS-9 5 3/4 26D Offset HungDS-6 26DEP-5 26DPH-4 26DFS-86 SAMPLE CASECardboard Shims

NON-FERROUS

Full Mortise Standard Weight,Three Knuckle4 1/2X4 TA314 32D NRP4 1/2X4 1/2 TA314 32D4 1/2X4 1/2 TA314 32D NRP

Full Mortise Standard Weight,Five Knuckle4X4 T2314 10B4X4 T2314 32D4X4 TA2314 32D4X4 TA2314 10B4 1/2X4 1/2 T2314 32D4 1/2X4 1/2 T2314 32D NRP4 1/2X4 1/2 T2314 10B4 1/2X 4 1/2 T2314 264 1/2X4 TA2314 32D4 1/2X4 TA2314 26D NRP4 1/2X4 TA2314 32D NRP4 1/2X4 1/2 TA2314 10B4 1/2X4 1/2 TA2314 10B NRP4 1/2X4 1/2 TA2314 P NRP4 1/2X4 1/2 TA2314 44 1/2X4 1/2 TA2314 324 1/2X4 1/2 TA2314 34 1/2X4 1/2 TA2314 26D4 1/2X4 1/2 TA2314 10 NRP4 1/2X4 1/2 TA2314 26D NRP4 1/2X4 1/2 TA2314 32D4 1/2X4 1/2 TA2314 32D NRP4 1/2X4 1/2 TA2314 3 NRP4 1/2X4 1/2 TA2314 4 NRP4 1/2X4 1/2 TB2314 26D NRP4 1/2X4 RCTA2314 32D NRP5X4 1/2 TA2314 32D5X4 1/2 TA2314 10B5X4 1/2 TA2314 32D NRP5X5 TA2314 10B5X5 TA2314 32D NRPFull Mortise Heavy Weight,

Three Knuckle4 1/2X4 1/2 T4A3386 32D4 1/2X4 1/2 T4A3386 44 1/2X4 1/2 T4A3386 324 1/2X4 1/2 T4A3386 34 1/2X4 1/2 T4A3386 10B4 1/2X4 1/2 T4A3386 26D4 1/2X4 1/2 T4A3386 P NRP4 1/2X4 1/2 T4A3386 26D4 1/2X4 1/2 T4A3386 10 NRP4 1/2X4 1/2 T4A3386 32D4 1/2X4 1/2 T4A3386 10B4 1/2X4 1/2 HT4A3386 32D4 1/2X4 1/2 T4B3386 32D5X4 1/2 T4A3386 10B NRP5X4 1/2 T4A3386 105X4 1/2 T4A3386 32D5X4 1/2 T4A3386 32D NRP5X5 T4A3386 32D NRP5X5 T4A3386 10B NRP6X5 T4A3386 32D NRP

Full Mortise Swing Clear4 1/2 T4A3395 32D5 T4A3395 32D

Full Mortise Hospital Tip4 1/2 X4 1/2 HTA2314 324 1/2 X4 HTA314 32D4 1/2X4 1/2 HTA314 32D4 1/2X4 1/2 HTB386 32D

Full Mortise Anchor Sets5X4 1/2 TA392 32D RH5X4 1/2 TA392 32D LH5X4 1/2 TA5392 32D RH5X4 1/2 TA5392 32D LH

Full Mortise Single Acting Spring4 1/2X4 1552 32D4 1/2X4 1/2 1552 32D

MacPro Series4 1/2X4 1/2 MPB79 34 1/2X4 1/2 MPB79 3 NRP4 1/2X4 MP79 44 1/2X4 MP79 4 NRP4 1/2X4 1/2 MPB79 44 1/2X4 1/2 MPB79 4 NRP4 1/2X4 1/2 MPB79 10B4 1/2X4 1/2 MPB79 10B NRP4 1/2X4 1/2 MPB79 264 1/2X4 MP79 26D4 1/2X4 MP79 26D NRP4 1/2X4 1/2 MPB79 26D4 1/2X4 1/2 MPB79 26D NRP4 1/2X4 MP79 P4 1/2X4 MP79 P NRP4 1/2X4 1/2 MPB79 P4 1/2X4 1/2 MPB79 P NRP4 1/2X4 1/2 MPB91 32D4 1/2X4 1/2 MPB91 32D NRP4 1/2X4 1/2 MP79 34 1/2X4 MPB79 44 1/2X4 MPB79 4 NRP4 1/2X4 1/2 MP79 44 1/2X4 1/2 MP79 4 NRP4 1/2X4 1/2 MP79 264 1/2X4 MPB79 26D4 1/2X4 MPB79 26D NRP4 1/2X4 1/2 MP79 26D4 1/2X4 1/2 MP79 26D NRP4 1/2X4 MPB79 P4 1/2X4 MPB79 P NRP4 1/2X4 1/2 MP79 P4 1/2X4 1/2 MP79 P NRP4 1/2X4 1/2 MPB68 26D HV4 1/2X4 1/2 MPB68 26D NRP4 1/2X4 1/2 MPB99 32D HV4 1/2X4 1/2 MPB99 32D NRP4 1/2X4 1/2 MPS60 26D4 1/2X4 1/2 MPB679 26D4 1/2X4 1/2 MPS60 P

For other items check with the factory onthe extensive list of products which are avail-able for immediate shipment.


San Leandro Stock List - January 2011

STEEL HINGESFull Mortise Standard Weight,Five Knuckle3 1/2X3 1/2 T2714 10B3 1/2X3 1/2 T2714 26D4X4 T2714 10B4 1/2X4 TA2714 26D4 1/2X4 1/2 T2714 P4 1/2X4 1/2 T2714 10B4 1/2X4 1/2 T2714 264 1/2X4 1/2 T2714 26D4 1/2X4 1/2 T2714 26D NRP4 1/2X4 1/2 TA2714 P4 1/2X4 1/2 TA2714 P NRP4 1/2X4 1/2 TA2714 34 1/2X4 1/2 TA2714 44 1/2X4 1/2 TA2714 104 1/2X4 1/2 TA2714 10B4 1/2X4 1/2 TA2714 264 1/2X4 1/2 TA2714 26D4 1/2X4 1/2 TA2714 26D NRP5X4 1/2 TA2714 26D

Full Mortise Standard Weight,Three Knuckle4 1/2X4 1/2 TA714 26D

Full Mortise Heavy Weight,Five Knuckle4 1/2X4 1/2 T4A3786 10B4 1/2X4 1/2 T4A3786 26D4 1/2X4 1/2 T4A3786 26D NRP5X4 1/2 T4A3786 P5X4 1/2 T4A3786 P NRP5X4 1/2 T4A3786 26D5X4 1/2 T4A3786 26D NRP

MacPro SeriesFull Mortise Standard Weight4 1/2x4 1/2 MP79 34 1/2X4 1/2 MP79 44 1/2X4 1/2 MP79 4 NRP4 1/2x4 1/2 MP79 264 1/2X4 MP79 P NRP4 1/2X4 MPB79 26D4 1/2X4 1/2 MP79 26D NRP4 1/2X4 MPB79 44 1/2X4 MPB79 4 NRP4 1/2X4 MPB79 P4 1/2X4 MPB79 P NRP4 1/2X4 1/2 MP79 26D4 1/2X4 1/2 MP79 26D NRP4 1/2X4 1/2 MP79 44 1/2X4 1/2 MP79 4 NRP4 1/2X4 1/2 MP79 P4 1/2X4 1/2 MPB79 26D4 1/2X4 1/2 MPB79 26D NRP4 1/2X4 1/2 MPB79 P4 1/2X4 1/2 MPB79 P NRP4 1/2x4 1/2 MPB91 32D4 1/2x 4 1/2 MPB91 32D NRP

MacPro SeriesFull Mortise Heavy Weight4 1/2X4 1/2 MPB68 26D4 1/2X4 1/2 MPB68 26D NRP4 1/2X4 1/2 MPB99 32D4 1/2X4 1/2 MPB99 32D NRP

NON-FERROUSFull Mortise Standard Weight,Five Knuckle4 1/2x4 1/2 TA2314 10B4 1/2x4 1/2 TA2314 26D4 1/2x4 1/2 TA2314 26D NRP4 1/2x4 1/2 TA2314 32D4 1/2x4 1/2 TA2314 32D NRP

NON-FERROUSFull Mortise Heavy Weight,Five Knuckle4 1/2X4 1/2 T4A3386 32D4 1/2X4 1/2 T4A3386 32D NRP

These items are in stock at 260 Santa Fe Street, Pomona CA 91767Phone 909-593-2100 - Fax 909-593-2500.Daily pickup orders must be placed by noon.

1/01/111.800.346.7707

•PRICEBOOK

Copyright

©1988-2011,M

cKinney

Products

Company,an

ASSAABLOYGroup

company.A

llrightsreserved

.Reproduction

inwhole

orinpartwithout

theexpress

written

perm

issionofM

cKinney

Products

Company

isprohib

ited.


TA314 31⁄2" x 31⁄2" 69313 P 48.70 3 48 3388.90 mm x 88.90 mm 69314 AP 48.70 3 48 33

69322 3 60.48 3 48 3369315 4 48.70 3 48 3369316 10 48.70 3 48 3369325 10A 60.48 3 48 3369317 10B 60.48 3 48 3369320 26 60.48 3 48 3369312 26D 48.32 3 48 3369323 32D 70.31 3 48 33

4" x 4" 69328 P 52.13 3 48 46101.60 mm x 101.60 mm 69329 AP 52.13 3 48 46

73709 3 58.81 3 48 4669330 4 52.13 3 48 4669331 10 52.13 3 48 4669340 10A 58.81 3 48 4669332 10B 58.81 3 48 4673714 26 58.81 3 48 4669327 26D 52.40 3 48 4669338 32D 68.54 3 48 46

41⁄2" x 4" 69343 P 56.12 3 48 53114.30 mm x 101.60 mm 69344 AP 56.12 3 48 53

69352 3 62.98 3 48 5369345 4 56.12 3 48 5369346 10 56.12 3 48 5369341 10A 62.98 3 48 5369347 10B 62.98 3 48 5369350 26 62.98 3 48 5369342 26D 56.12 3 48 5369354 32 81.91 3 48 5369353 32D 54.46 3 48 53

41⁄2" x 41⁄2" 69358 P 56.12 3 48 57114.30 mm x 114.30 mm 69359 AP 56.12 3 48 57

69367 3 62.98 3 48 5769360 4 56.12 3 48 5769361 10 56.12 3 48 5769355 10A 62.98 3 48 5769362 10B 62.98 3 48 5769365 26 62.98 3 48 5769357 26D 56.12 3 48 5769369 32 81.91 3 48 5769368 32D 55.52 3 48 57

41⁄2" x 41⁄2" 69370 10-NRP 59.64 3 48 57114.30 mm x 114.30 mm

69371 26D-NRP 59.64 3 48 57NRP

69356 32D-NRP 66.32 3 48 57

PRICE BOX CASE CASEPRODUCT SIZE PART # FINISH

EACH QTY. QTY. WEIGHT

FM-1FULL MORTISE HINGESSTANDARD WEIGHT THREE KNUCKLENON-FERROUS BEARINGS

January 1, 2011

FM-1

1.800.346.7707•PRICEBOOK

Copyright

©1988-2011,M

cKinney

Products

Company,an

ASSAABLOYGroup

company.A

llrightsreserved

.Reproduction

inwhole

orinpartwithout

theexpress

written

perm

issionofM

cKinney

Products

Company

isprohib

ited.

Price Code 30

1/01/11

4.McK Price Book 2011:McKinney Price Book 2003 11/2/10 9:38 AM Page FM1



TA314 5" x 4" 73882 P 74.48 3 24 33continued 127 mm x 101.60 mm 73883 AP 74.48 3 24 33

73884 3 86.26 3 24 3373885 4 74.48 3 24 3373886 10 74.48 3 24 3373887 10A 86.26 3 24 3373888 10B 86.26 3 24 3373889 26 86.26 3 24 3373880 26D 75.13 3 24 3373890 32 99.70 3 24 3373881 32D 90.81 3 24 33

5" x 41⁄2" 69373 P 74.48 3 24 36127 mm x 114.30 mm 69374 AP 74.48 3 24 36

69382 3 86.26 3 24 3669375 4 74.48 3 24 3669376 10 74.48 3 24 3669385 10A 86.26 3 24 3669377 10B 86.26 3 24 3669380 26 86.26 3 24 3669372 26D 75.13 3 24 3669384 32 99.70 3 24 3669383 32D 90.81 3 24 36

5" x 5" 69388 P 74.48 3 24 36127 mm x 127 mm 69389 AP 74.48 3 24 36

69397 3 86.26 3 24 3669390 4 74.48 3 24 3669391 10 74.48 3 24 3669386 10A 86.26 3 24 3669392 10B 86.26 3 24 3669395 26 86.26 3 23 3669387 26D 75.13 3 24 3669399 32 99.70 3 24 3669398 32D 90.81 3 24 36

FM-2FULL MORTISE HINGESSTANDARD WEIGHT THREE KNUCKLENON-FERROUS BEARINGS

January 1, 2011

FM-2


1.800.346.7707•PRICEBOOK


Price Code 30

1/01/11




TA386 41⁄2" x 41⁄2" 69403 P 80.23 3 24 37114.30 mm x 114.30 mm 69404 AP 80.23 3 24 37

69412 3 97.94 3 24 3769405 4 80.23 3 24 3769406 10 80.23 3 24 3769416 10A 97.94 3 24 3769407 10B 97.94 3 24 3769410 26 97.94 3 24 3769402 26D 86.26 3 24 3769414 32 127.07 3 24 3769413 32D 85.47 3 24 37

41⁄2" x 41⁄2" 69400 26D-NRP 89.78 3 24 37114.30 mm x 114.30 mm 69415 32D-NRP 88.11 3 24 375" x 41⁄2" 69418 P 98.82 3 24 41

127 mm x 114.30 mm 69419 AP 102.59 3 24 4169427 3 122.90 3 24 4169420 4 102.59 3 24 4169421 10 102.59 3 24 4169431 10A 122.90 3 24 4169422 10B 122.90 3 24 4169425 26 122.90 3 24 4169417 26D 94.17 3 24 4169429 32 143.77 3 24 4169428 32D 129.29 3 24 41

5" x 41⁄2" 69430 26D-NRP 101.10 3 24 41127 mm x 114.30 mm 74956 32D-NRP 115.26 3 24 415" x 5" 69433 P 102.59 3 24 45

127 mm x 127 mm 69434 AP 102.59 3 24 4569442 3 122.90 3 24 4569435 4 102.59 3 24 4569436 10 102.59 3 24 4569445 10A 122.90 3 24 4569437 10B 122.90 3 24 4569440 26 122.90 3 24 4569432 26D 97.76 3 24 4569444 32 143.77 3 24 4569443 32D 129.29 3 24 45

6" x 6" 69448 P 148.04 3 18 74152.4 mm x 152.4 mm 69449 AP 148.04 3 18 74

69457 3 185.23 3 18 7469450 4 148.04 3 18 7469451 10 148.04 3 18 7469460 10A 185.23 3 18 7469452 10B 185.23 3 18 7469455 26 185.23 3 18 7469447 26D 164.64 3 18 7469459 32 220.75 3 18 7469458 32D 217.60 3 18 74

FM-3

1.800.346.7707•PRICEBOOK

Copyright

©1988-2011,M

cKinney

Products

Company,an

ASSAABLOYGroup

company.A

llrightsreserved

.Reproduction

inwhole

orinpartwithout

theexpress

written

perm

issionofM

cKinney

Products

Company

isprohib

ited.

FM-3FULL MORTISE HINGESHEAVY WEIGHT THREE KNUCKLENON-FERROUS BEARINGS

January 1, 2011

Price Code 30

1/01/11




HTA386 41⁄2" x 41⁄2" 69462 32D 112.54 3 24 37114.30 mm x 114.30 mm

STAINLESS STEEL INSTITUTIONAL HINGESHTA386 41⁄2" x 41⁄2" 81178 32D 127.90 3 24 37

114.30 mm x 114.30 mm

HTA386 x PSF 81080 32D 141.90 3 24 40Packed with 1/2 x 12-24 Torx Pin Head Security Machine ScrewHTA386 MSP SetOption A 330.16Option B 550.78

FM-4


1.800.346.7707•PRICEBOOK


FM-4FULL MORTISE HINGESHOSPITAL TIP HEAVY WEIGHTTHREE KNUCKLE NON-FERROUS BEARINGS

Price Code 30

January 1, 2011

1/01/11




FM-5FULL MORTISE HINGESSTEEL STANDARD WEIGHT THREE KNUCKLE

T714 31⁄2" x 31⁄2" 69088 P 4.11 2 50 3288.90 mm x 88.90 mm 69089 AP 5.72 2 50 32

69097 3 10.36 2 50 3269090 4 5.72 2 50 3269091 10 5.72 2 50 3269086 10A 10.36 2 50 3269092 10B 10.36 2 50 3269095 26 10.36 2 50 3269087 26D 8.67 2 50 32

4" x 4" 69103 P 5.81 3 48 39101.60 mm x 101.60 mm 69104 AP 7.69 3 48 39

69112 3 11.08 3 48 3969105 4 7.69 3 48 3969106 10 7.69 3 48 3969085 10A 11.08 3 48 3969107 10B 11.08 3 48 3969110 26 11.08 3 48 3969102 26D 9.47 3 48 39

41⁄2" x 4" 69118 P 8.04 3 48 44114.30 mm x 101.60 mm 69119 AP 10.01 3 48 44

69127 3 15.02 3 48 4469120 4 10.01 3 48 4469121 10 10.01 3 48 4469100 10A 15.02 3 48 4469122 10B 15.02 3 48 4469125 26 15.02 3 48 4469117 26D 12.33 3 48 4469130 D3 10.01 3 48 4469131 D4 10.01 3 48 44

41⁄2" x 4" NRP 74003 26D 15.64 3 48 44114.30 mm x 101.60 mm

41⁄2" x 41⁄2" 69133 P 8.04 3 48 48114.30 mm x 114.30 mm 69134 AP 10.01 3 48 48

69142 3 15.02 3 48 4869135 4 10.01 3 48 4869136 10 10.01 3 48 4869145 10A 15.02 3 48 4869137 10B 15.02 3 48 4869140 26 15.02 3 48 4869132 26D 9.22 3 48 48

41⁄2" x 41⁄2" NRP 74028 P-NRP 11.62 3 48 44114.30 mm x 114.30 mm 74030 10B-NRP 18.32 3 48 44

74029 26D-NRP 15.64 3 48 44

FM-5

1.800.346.7707•PRICEBOOK

Copyright

©1988-2011,M

cKinney

Products

Company,an

ASSAABLOYGroup

company.A

llrightsreserved

.Reproduction

inwhole

orinpartwithout

theexpress

written

perm

issionofM

cKinney

Products

Company

isprohib

ited.

Price Code 30

January 1, 2011

1/01/11




T714 5" x 41⁄2" 69148 P 21.54 3 24 29continued 127 mm x 114.30 mm 69160 AP 26.09 3 24 29

69157 3 35.83 3 24 2969150 4 26.09 3 24 2969151 10 26.09 3 24 2969161 10A 35.83 3 24 2969152 10B 35.83 3 24 2969155 26 35.83 3 24 2969147 26D 27.43 3 24 29

5" x 5" 69163 P 21.54 3 24 32127 mm x 127 mm 69164 AP 26.09 3 24 32

69172 3 35.83 3 24 3269165 4 26.09 3 24 3269166 10 26.09 3 24 3269175 10A 35.83 3 24 3269167 10B 35.83 3 24 3269170 26 35.83 3 24 3269162 26D 27.43 3 24 32

FM-6


1.800.346.7707•PRICEBOOK


FM-6FULL MORTISE HINGESSTEEL STANDARD WEIGHT THREE KNUCKLE

Price Code 30

January 1, 2011

1/01/11




FM-7FULL MORTISE HINGESSTEEL STANDARD WEIGHTTHREE KNUCKLE BEARING

TA714 31⁄2" x 31⁄2" 69178 P 16.17 3 48 3188.90 mm x 88.90 mm 69179 AP 20.11 3 48 31

69187 3 23.58 3 48 3169180 4 16.17 3 48 3169181 10 18.05 3 48 3169190 10A 23.58 3 48 3169182 10B 23.58 3 48 3169185 26 23.58 3 48 3169177 26D 17.76 3 48 31

4" x 4" 69193 P 17.96 3 48 42101.60 mm x 101.60 mm 69194 AP 21.35 3 48 42

69202 3 26.09 3 48 4269195 4 17.96 3 48 4269196 10 19.21 3 48 4269191 10A 26.09 3 48 4269197 10B 26.09 3 48 4269200 26 26.09 3 48 4269192 26D 19.23 3 48 42

41⁄2" x 4" 69208 P 18.77 3 48 51114.30 mm x 101.60 mm 69209 AP 22.34 3 48 51

69217 3 27.87 3 48 5169210 4 18.77 3 48 5169211 10 18.28 3 48 5169176 10A 27.87 3 48 5169212 10B 24.19 3 48 5169215 26 24.19 3 48 5169207 26D 17.85 3 48 5169206 D3 22.34 3 48 5169221 D4 22.34 3 48 51

41⁄2" x 41⁄2" 69223 P 16.28 3 48 55114.30 mm x 114.30 mm 69224 AP 22.34 3 48 55

69232 3 24.19 3 48 5569225 4 18.77 3 48 5569226 10 15.04 3 48 5569236 10A 24.19 3 48 5569227 10B 20.85 3 48 5569230 26 20.85 3 48 5569222 26D 17.51 3 48 5569250 D3 22.34 3 48 5569146 D4 22.34 3 48 55

41⁄2" x 41⁄2" 69235 P-NRP 22.15 3 48 55114.30 mm x 114.30 mm 74283 26D-NRP 20.12 3 48 55(NRP) 69251 3-NRP 31.10 3 48 55

74200 10-NRP 23.50 3 48 5574282 10B-NRP 31.10 3 48 55

FM-7

1.800.346.7707•PRICEBOOK

Copyright

©1988-2011,M

cKinney

Products

Company,an

ASSAABLOYGroup

company.A

llrightsreserved

.Reproduction

inwhole

orinpartwithout

theexpress

written

perm

issionofM

cKinney

Products

Company

isprohib

ited.

�

�=

Price Code 30

January 1, 2011

1/01/11




HTA714 41⁄2" x 41⁄2" 69233 26D 34.35 3 48 55114.30 mm x 114.30 mm

TA714 5" x 41⁄2" 69238 P 30.47 3 24 32127 mm x 114.30 mm 69239 AP 36.45 3 24 32

69247 3 48.70 3 24 3269240 4 30.47 3 24 3269241 10 32.70 3 24 3269311 10A 48.70 3 24 3269242 10B 48.70 3 24 3269245 26 48.70 3 24 3269237 26D 32.02 3 24 32

5" x 5" 69253 P 30.47 3 24 34127 mm x 127 mm 69254 AP 36.45 3 24 34

69262 3 48.79 3 24 3469255 4 30.47 3 24 3469256 10 32.70 3 24 3469326 10A 48.70 3 24 3469257 10B 48.70 3 24 3469260 26 48.70 3 24 3469252 26D 36.91 3 24 34

TA714 41⁄2" x 6" 74356 P 52.90 3 24 39114.30 mm x 152.4 mm 74357 AP 53.70 3 24 39

74358 3 59.42 3 24 3974359 4 51.65 3 24 3974360 10 51.65 3 24 3974370 10A 59.42 3 24 3974371 10B 59.42 3 24 3974372 26 59.42 3 24 3974373 26D 56.47 3 24 3974374 D3 53.70 3 24 3974375 D4 53.70 3 24 39

STEEL STANDARD WEIGHT THREE KNUCKLE BEARING WIDE THROW

FM-8


1.800.346.7707•PRICEBOOK


FM-8FULL MORTISE HINGESSTEEL STANDARD WEIGHTTHREE KNUCKLE BEARING

Price Code 30

January 1, 2011

1/01/11




FM-9FULL MORTISE HINGESSTEEL HEAVY WEIGHTTHREE KNUCKLE BEARING

TA786 41⁄2" x 41⁄2" 69268 P 50.93 3 24 37114.30 mm x 114.30 mm 69269 AP 59.42 3 24 37

69277 3 65.76 3 24 3769270 4 53.88 3 24 3769271 10 46.75 3 24 3775282 10A 65.76 3 24 3769272 10B 57.07 3 24 3769275 26 65.76 3 24 3769267 26D 41.57 3 24 37

41⁄2" x 41⁄2"-NRP 69280 P-NRP 53.70 3 24 37114.30 mm x 114.30 mm 69281 10B-NRP 69.16 3 24 37

75240 26D-NRP 69.16 3 24 375" x 41⁄2" 69283 P 58.80 3 24 39

127 mm x 114.30 mm 69284 AP 68.81 3 24 3969292 3 76.57 3 24 3969285 4 62.01 3 24 3969286 10 62.01 3 24 3975283 10A 76.57 3 24 3969287 10B 76.57 3 24 3969290 26 76.57 3 24 3969282 26D 47.45 3 24 39

5" x 5" 69298 P 58.80 3 24 42127 mm x 127 mm 69299 AP 68.81 3 24 42

69307 3 76.57 3 24 4269300 4 62.01 3 24 4269301 10 62.01 3 24 4275284 10A 76.57 3 24 4269302 10B 76.57 3 24 4269305 26 76.57 3 24 4269297 26D 55.05 3 24 42

6" x 6" 75311 P 109.01 3 18 62152.40 mm x 152.40 mm 75312 AP 116.06 3 18 62

75316 3 143.86 3 18 6275317 4 116.06 3 18 6275319 10 116.06 3 18 6275327 10A 143.86 3 18 6275320 10B 143.86 3 18 6275323 26 143.86 3 18 6275324 26D 121.78 3 18 62

-

FM-9

1.800.346.7707•PRICEBOOK

Copyright

©1988-2011,M

cKinney

Products

Company,an

ASSAABLOYGroup

company.A

llrightsreserved

.Reproduction

inwhole

orinpartwithout

theexpress

written

perm

issionofM

cKinney

Products

Company

isprohib

ited.

Price Code 30

January 1, 2011

1/01/11




TB786 8" x 6" 75349 P 289.49 3203.2 mm x 152. 4 mm 75350 AP 296.46 3

75354 3 355.61 375355 4 296.46 375357 10 296.46 3 AS ORDERED75365 10A 355.61 375358 10B 355.61 375361 26 355.61 375362 26D 300.21 3

8" x 8" 75424 P 289.49 3203.2 mm x 203.2 mm 75425 AP 296.46 3

75426 3 355.61 3Template 046A for 75427 4 296.46 313⁄4 to 21⁄4" thick doors 75428 10 296.46 3 AS ORDEREDTemplate 046B for 21⁄2" 75432 10A 355.61 3or more thick doors 75429 10B 355.61 3*Specify hole pattern 75431 26 355.61 3

75430 26D 300.21 3

HTA786 41⁄2" x 41⁄2" 75242 P 69.45 3 24 35114.30 mm x 114.30 75243 P x PSF 82.49 3 24 35

75241 26D 64.24 3 24 3575244 26D x PSF 77.28 3 24 35

5" x 41⁄2" 75260 26D 3 24 35127 mm x 114.30

HTB786 41⁄2" x 41⁄2" 75220 P 80.69 3113.30 mm x 114.30 mm 75221 P x PSF 95.51 3

75222 26D 92.21 375223 26D x PSF 107.04 375224 P x CC-4 wire 250.45 375225 26D x CC-4 wire 276.80 3

Hinges are packed with 1⁄2" x 12-24 Torx Pin Head Machine Screws.

STEEL HEAVY WEIGHT THREE KNUCKLE HOSPITAL TIP

STEEL HEAVY WEIGHT THREE KNUCKLE INSTITUTIONAL HINGE

FM-10


1.800.346.7707•PRICEBOOK


FM-10FULL MORTISE HINGESSTEEL .225 GAUGE SPECIAL HEAVYWEIGHT HINGE THREE KNUCKLE BEARING

Price Code 30

January 1, 2011

1/01/11




FM-11FULL MORTISE HINGESSTEEL SWING CLEAR HEAVY WEIGHTTHREE KNUCKLE BEARING - REVERSIBLE

TA795 41⁄2" 75468 P 140.34 3 24 57114.30 mm 75469 AP 146.20 3 24 57

75470 3 178.40 3 24 5775471 4 146.20 3 24 5775472 10 146.20 3 24 5775473 10A 178.40 3 24 5775474 10B 178.40 3 24 5775475 26 178.40 3 24 5775476 26D 121.34 3 24 57

5" 75368 P 140.34 3 24 57127 mm 75369 AP 146.20 3 24 57

75373 3 178.40 3 24 5775374 4 146.20 3 24 5775376 10 146.20 3 24 5775384 10A 178.40 3 24 5775377 10B 178.40 3 24 5775380 26 178.40 3 24 5775381 26D 115.83 3 24 57

For swing clear heavy weight three knuckle bearing, beveled edge application order TA5795.(Hinges are reversible and non-handed.)

FM-11

1.800.346.7707•PRICEBOOK

Copyright

©1988-2011,M

cKinney

Products

Company,an

ASSAABLOYGroup

company.A

llrightsreserved

.Reproduction

inwhole

orinpartwithout

theexpress

written

perm

issionofM

cKinney

Products

Company

isprohib

ited.

Price Code 30

January 1, 2011

1/01/11


FM-12


1.800.346.7707•PRICEBOOK


FM-12ET-FULL MORTISE HINGESSTANDARD WEIGHT THREE KNUCKLEWITH BUTTON TIPS NON-FERROUS BEARING



TA314-ET 31⁄2" x 31⁄2" 70350 P 43.78 3 48 3388.90 mm x 88.90 mm 70351 AP 43.78 3 48 33

70352 3 54.45 3 48 3370353 4 43.78 3 48 3370354 10 43.78 3 48 3370355 10A 54.45 3 48 3370356 10B 54.45 3 48 3370357 26 54.45 3 48 3370358 26D 43.51 3 48 3370359 32D 63.26 3 48 33

4" x 4" 70360 P 46.94 3 48 46101.60 mm x 101.60 mm 70361 AP 46.94 3 48 46

70362 3 52.87 3 48 4670363 4 46.94 3 48 4670364 10 46.94 3 48 4670365 10A 52.87 3 48 4670366 10B 52.87 3 48 4670367 26 52.87 3 48 4670368 26D 47.21 3 48 4670369 32D 61.68 3 48 46

41⁄2" x 4" 70380 P 50.56 3 48 53114.30 mm x 101.60 mm 70381 AP 50.56 3 48 53

70382 3 56.67 3 48 5370383 4 50.56 3 48 5370384 10 50.56 3 48 5370385 10A 56.67 3 48 5370259 10B 56.67 3 48 5370386 26 56.67 3 48 5370387 26D 50.46 3 48 5370388 32 73.74 3 48 5370389 32D 65.58 3 48 53

41⁄2" x 4" 70124 3-NRP 59.83 3 48 53114.30 mm x 101.60 mm 70125 10A-NRP 59.83 3 48 53(NRP) 70126 10B-NRP 59.83 3 48 53

70127 26D-NRP 53.61 3 48 5370119 32D-NRP 68.73 3 48 53

41⁄2" x 41⁄2" 70390 P 50.56 3 48 57114.30 mm x 114.30 mm 70391 AP 50.56 3 48 57

70392 3 56.67 3 48 5770393 4 50.56 3 48 5770394 10 50.56 3 48 5770395 10A 56.67 3 48 5770261 10B 56.67 3 48 5770396 26 56.67 3 48 5770255 26D 50.46 3 48 5770397 32 73.74 3 48 5770128 32D 65.58 3 48 57Price Code 30

January 1, 2011

1/01/11


FM-13FULL MORTISE HINGESSTANDARD WEIGHT THREE KNUCKLE WITHBUTTON TIPS NON-FERROUS BEARING

FM-13

1.800.346.7707•PRICEBOOK

Copyright

©1988-2011,M

cKinney

Products

Company,an

ASSAABLOYGroup

company.A

llrightsreserved

.Reproduction

inwhole

orinpartwithout

theexpress

written

perm

issionofM

cKinney

Products

Company

isprohib

ited.



TA314-ET 41⁄2" x 41⁄2" 70398 10-NRP 65.58 3 48 57114.30 mm x 114.30 mm 70256 26D-NRP 53.61 3 48 57(NRP) 70129 32D-NRP 68.73 3 48 575" x 4" 70400 P 67.06 3 24 33

127 mm x 101.60 mm 70401 AP 67.06 3 24 3370402 3 77.64 3 24 3370403 4 67.06 3 24 3370404 10 67.06 3 24 3370405 10A 77.64 3 24 3370406 10B 77.64 3 24 3370407 26 77.64 3 24 3370408 26D 67.62 3 24 3370409 32 89.69 3 24 3370410 32D 81.72 3 24 33

5" x 41⁄2" 70411 P 67.06 3 24 36127 mm x 114.30 mm 70412 AP 67.06 3 24 36

70413 3 77.64 3 24 3670414 4 67.06 3 24 3670415 10 67.06 3 24 3670416 10A 77.64 3 24 3670417 10B 77.64 3 24 3670418 26 77.64 3 24 3670419 26D 67.62 3 24 3670420 32 89.69 3 24 3670421 32D 81.72 3 24 36

5" x 5" 70422 P 67.06 3 24 36127 mm x 127 mm 70423 AP 67.06 3 24 36

70424 3 77.64 3 24 3670425 4 67.06 3 24 3670426 10 67.06 3 24 3670427 10A 77.64 3 24 3670428 10B 77.64 3 24 3670429 26 77.64 3 24 3670430 26D 67.62 3 24 3670431 32 89.69 3 24 3670432 32D 81.72 3 24 36

Price Code 30

January 1, 2011

1/01/11


FM-14


1.800.346.7707•PRICEBOOK


FM-14ET-FULL MORTISE HINGESHEAVY WEIGHT THREE KNUCKLE WITHBUTTON TIPS NON-FERROUS BEARING



TA386-ET 41⁄2" x 41⁄2" 70433 P 72.16 3 24 37114.30 mm x 114.30 mm 70434 AP 72.16 3 24 37

70435 3 88.11 3 24 3770436 4 72.16 3 24 3770437 10 72.16 3 24 3770438 10A 88.11 3 24 3770439 10B 88.11 3 24 3770440 26 88.11 3 24 3770139 26D 77.64 3 24 3770442 32 114.37 3 24 3770120 32D 102.86 3 24 37

41⁄2" x 41⁄2" 70137 26D-NRP 80.80 3 24 37114.30 mm x 114.30 mm 70121 32D-NRP 106.02 3 24 37(NRP)5" x 41⁄2" 70443 P 92.29 3 24 41

127 mm x 114.30 mm 70444 AP 92.29 3 24 4170445 3 110.56 3 24 4170446 4 92.29 3 24 4170447 10 92.29 3 24 4170448 10A 110.56 3 24 4170449 10B 110.56 3 24 4170450 26 110.56 3 24 4170451 26D 87.93 3 24 4170452 32 129.39 3 24 4170453 32D 116.31 3 24 41

5" x 41⁄2" 70454 26D-NRP 90.99 3 24 41127 mm x 114.30 mm 70455 32D-NRP 119.56 3 24 41(NRP)5" x 5" 70456 P 92.29 3 24 45

127 mm x 127 mm 70457 AP 92.29 3 24 4570458 3 110.56 3 24 4570459 4 92.29 3 24 4570460 10 92.29 3 24 4570461 10A 110.56 3 24 4570462 10B 110.56 3 24 4570463 26 110.56 3 24 4570464 26D 87.93 3 24 4570465 32 129.39 3 24 4570466 32D 116.31 3 24 45

6" x 6" 70467 P 133.19 3 18 74152.4 mm x 152.4 mm 70468 AP 133.19 3 18 74

70469 3 166.68 3 18 7470470 4 133.19 3 18 7470471 10 133.19 3 18 7470472 10A 166.68 3 18 7470473 10B 166.68 3 18 7470474 26 166.68 3 18 7470475 26D 148.13 3 18 7470476 32 198.68 3 18 7470122 32D 195.84 3 18 74

Price Code 30

January 1, 2011

1/01/11


FM-15ET-FULL MORTISE HINGESSTANDARD WEIGHT THREE KNUCKLEWITH BUTTON TIPS

FM-15

1.800.346.7707•PRICEBOOK

Copyright

©1988-2011,M

cKinney

Products

Company,an

ASSAABLOYGroup

company.A

llrightsreserved

.Reproduction

inwhole

orinpartwithout

theexpress

written

perm

issionofM

cKinney

Products

Company

isprohib

ited.



T714-ET 31⁄2" x 31⁄2" 70300 P 3.66 2 48 3188.90 mm x 88.90 mm 70301 AP 5.09 2 48 31

70302 3 9.30 2 48 3170303 4 5.09 2 48 3170304 10 5.09 2 48 3170305 10A 9.30 2 48 3170306 10B 9.30 2 48 3170307 26 9.30 2 48 3170308 26D 7.78 2 48 31

4" x 4" 70309 P 5.18 3 48 39101.60 mm x 101.60 mm 70310 AP 6.89 3 48 39

70311 3 9.92 3 48 3970312 4 6.89 3 48 3970313 10 6.89 3 48 3970314 10A 9.92 3 48 3970315 10B 9.92 3 48 3970316 26 9.92 3 48 3970317 26D 8.49 3 48 39

41⁄2" x 4" 70477 P 7.24 3 48 44114.30 mm x 101.60 mm 70478 AP 9.02 3 48 44

70479 3 13.50 3 48 4470141 4 9.02 3 48 4470143 10 9.02 3 48 4470480 10A 13.50 3 48 4470103 10B 13.50 3 48 4470144 26 13.50 3 48 4470481 26D 11.08 3 48 4470482 D3 9.02 3 48 4470483 D4 9.02 3 48 44

41⁄2" x 4" 70142 26D-NRP 14.03 3 48 44114.30 mm x 101.60 mm

(NRP)41⁄2" x 41⁄2" 70484 P 7.24 3 48 48

114.30 mm x 114.30 mm 70485 AP 9.02 3 48 4870486 3 13.50 3 48 4870487 4 9.02 3 48 4870488 10 9.02 3 48 4870489 10A 13.50 3 48 4870490 10B 13.50 3 48 4870491 26 13.50 3 48 4870337 26D 7.24 3 48 48

41⁄2" x 41⁄2" 70493 P-NRP 10.46 3 48 48114.30 mm x 114.30 mm 70494 10B-NRP 16.45 3 48 48(NRP) 70495 26D-NRP 14.03 3 48 48

Price Code 30

January 1, 2011

1/01/11


FM-16


1.800.346.7707•PRICEBOOK


FM-16ET-FULL MORTISE HINGESSTANDARD WEIGHT THREE KNUCKLEWITH BUTTON TIPS



T714 - ET 5" x 41⁄2" 70500 P 19.39 3 24 29127 mm x 114.30 mm 70501 AP 23.50 3 24 29

70502 3 32.26 3 24 2970503 4 23.50 3 24 2970504 10 23.50 3 24 2970505 10A 32.26 3 24 2970506 10B 32.26 3 24 2970507 26 32.26 3 24 2970508 26D 24.66 3 24 29

5" x 5" 70509 P 19.39 3 24 32127 mm x 127 mm 70510 AP 23.50 3 24 32

70511 3 32.26 3 24 3270512 4 23.50 3 24 3270513 10 23.50 3 24 3270514 10A 32.26 3 24 3270515 10B 32.26 3 24 3270516 26 32.26 3 24 3270517 26D 24.66 3 24 32

Price Code 30

January 1, 2011

1/01/11


FM-17ET-FULL MORTISE HINGESSTEEL STANDARD THREE KNUCKLEBEARING WITH BUTTON TIPS

FM-17

1.800.346.7707•PRICEBOOK

Copyright

©1988-2011,M

cKinney

Products

Company,an

ASSAABLOYGroup

company.A

llrightsreserved

.Reproduction

inwhole

orinpartwithout

theexpress

written

perm

issionofM

cKinney

Products

Company

isprohib

ited.



TA714-ET 31⁄2" x 31⁄2" 70318 P 14.56 3 48 3188.90 mm x 88.90 mm 70319 AP 18.14 3 48 31

70320 3 21.18 3 48 3170321 4 14.56 3 48 3170322 10 16.17 3 48 3170323 10A 21.18 3 48 3170324 10B 21.18 3 48 3170325 26 21.18 3 48 3170326 26D 18.40 3 48 31

4" x 4" 70327 P 16.17 3 48 42101.60 mm x 101.60 mm 70328 AP 19.21 3 48 42

70329 3 23.50 3 48 4270330 4 16.17 3 48 4270331 10 17.25 3 48 4270332 10A 23.50 3 48 4270333 10B 23.50 3 48 4270334 26 23.50 3 48 4270335 26D 19.93 3 48 42

41⁄2" x 4" 70963 P 16.89 3 48 51114.30 mm x 101.60 mm 70964 AP 20.11 3 48 51

70108 3 25.11 3 48 5170965 4 16.89 3 48 5170966 10 18.05 3 48 5170520 10A 25.11 3 48 5170107 10B 25.11 3 48 5170106 26 27.87 3 48 5170109 26D 18.78 3 48 5170967 D3 20.11 3 48 5170968 D4 20.11 3 48 51

41⁄2" x 4" 70529 P-NRP 19.93 3 48 51114.30 mm x 101.60 mm 70530 3-NRP 27.96 3 48 51(NRP) 70531 10-NRP 21.09 3 48 51

70532 10B-NRP 27.96 3 48 5170110 26D-NRP 24.12 3 48 51

41⁄2" x 41⁄2" 70521 P 16.89 3 48 55114.30 mm x 114.30 mm 70522 AP 20.11 3 48 55

70523 3 25.11 3 48 5570524 4 16.89 3 48 5570113 10 18.05 3 48 5570525 10A 25.11 3 48 5570111 10B 25.11 3 48 5570526 26 25.11 3 48 5570340 26D 15.71 3 48 5570527 D3 20.11 3 48 5570528 D4 20.11 3 48 55

Price Code 30

January 1, 2011

1/01/11


FM-18


1.800.346.7707•PRICEBOOK


FM-18ET-FULL MORTISE HINGESSTEEL STANDARD WEIGHT THREE KNUCKLEBEARING WITH BUTTON TIPS



TA714-ET 41⁄2"x41⁄2" 70533 P-NRP 19.93 3 48 55114.30mmx114.30mm 70534 3-NRP 27.96 3 48 55(NRP) 70114 10-NRP 21.09 3 48 55

70535 10B-NRP 27.96 3 48 5570146 26D-NRP 18.04 3 48 55

5"x41⁄2" 70536 P 27.43 3 24 32127mmx114.30mm 70537 AP 32.79 3 24 32

70538 3 43.78 3 24 3270539 4 27.43 3 24 3270540 10 29.40 3 24 3270541 10A 43.78 3 24 3270542 10B 43.78 3 24 3270543 26 43.78 3 24 3270145 26D 33.15 3 24 32

5"x5" 70544 P 27.35 3 24 34127mmx127mm 70545 AP 32.79 3 24 34

70546 3 43.78 3 24 3470547 4 27.35 3 24 3470548 10 29.40 3 24 3470549 10A 48.70 3 24 3470550 10B 48.70 3 24 3470551 26 48.70 3 24 3470552 26D 33.15 3 24 34

STEEL STANDARD WEIGHT THREE KNUCKLE BEARING WIDE THROW WITH BUTTON TIPS

41⁄2x6 70670 P 47.53 3 24 39114.30mmx152.4mm 70671 AP 48.33 3 24 39

70672 3 53.43 3 24 397

Documents

Transfer Device Solutions - ACCESS HARDWAREaccesshardware.com/.../08/McKinney-Jan-2011-Pricebook.pdfA-2011 Price Book Supplement 1.51420 Transfer Device PB.indd 1 11/1/10 8:37:58 AM