INDIAN STANDARD SPECIFICr\. TraNS ANDCODES OF PRACTICE

List of certain Indian Standard Specifications and Codes of Practice,published by the Indian Standard Institution, New Delhi during theperiod Aug 69 to Dec 70 are given in Appendix "A'.

2. All concerned dealing with design, specifications and execution ofworks should study these to keep themselves abreast with the up-to-dateformulation of standards.

LIST OF IMPURTANT INDIAN STANDARD SPECIFICATIONAND CODE OF PRACTICE PUBLISHED DURING

AUG 69 TO DEC 70 ~

ISINd I

!

Civil Engineering

Low density polytheylene pipes IS: 3076-1968 5.00portable water supplies

(1st revision)

Recommendations for selection of IS; 4971-1968industrial floot finishes.

Door handles for mortice locks(vertical type)

Criteria for blast resistant designof structures for explosion abovegfound

Galvanized steel sheets (Plain &corrugated (Second revision)

Method of measurement of build-ing and civil engineering work:Part I earthwork. (Second revision)

Method of measurement of build-ing and civil engineering work:Part III Brick work.

Method of measurement of build-ing and civil engineering work:Part IV stone masonry

Method of measurement of build-ing work: Part XIII; white wash-ing, colour washing, distemperingand other finishes.

IS ; 1200-1969(Part I)

IS; 1200-1970(Part III)

IS: 1200-1970(Part IV)

IS: 1200-1970(Part XIII)

ISl No I

I

Method of measurement of build-ing and civil engineering work:Part XVI, laying of water sewage

lines including appurtenant works

Method of measurement of build-ding and civil engineering work:Part XVII; road work includingairfield pavement.

Block boards. IS : 1659-1969

Methods for sampling of aggregate IS: 2430-1969for concrete.

IS: 1200-1969Part XVI)

IS : 1200-1969(Part XVII)

Methods of test for soils, Part IS: 2720-1969XXXI field determination of Cali- (Part XXXI)fornia bearing ratio.

Code of practice for design andconstruction of dock & harbourstructures (Part IV) steel pileretaining walls.

Chemical resilltant mortars; PartI; silicate type.

Chemical resistant mortars; PartII ; resin type.

Safety code for piling and otherdeep foundations.

Bitumen mastic for bridge decking TS : 5317-1969and roads.

IS: 4651-1969(Part IV)

IS : 4832-1969(Part 1)

IS : 4832-1969(Part II)

IS : 5121-1969

Code of practice for laying of IS: 5318-1969flexible PVC sheets and tile flooring

Code of practice for construction IS: 5390-1969of timber ceiling.

Code of practice for laying in situ- IS: 5491-1969granolithic concret~ floor topping.

7.50

4.00

ISI No I

I

Method of test for toughness of IS : 5218-1969

natural buildings stones.

Cement paint, colour as required.

Plastic emulsion paint; Part I for

interior use.

Recommendation for detailing of

reinforcement in reinforced con-crete work.

IS : 5410-1969

IS : 5411-1969(Part I)

IS : 5525-1969

Structural and Metals

Structural steel (standard quality). IS: 226-196C)

Fourth revision.

Structural steel (ordinary quality). IS: 1977-1969

First revision.

Practice and measurements pro-cedures for testing refrigerantcompressors.

Boxes for the enclosures of elec-

trical accessories; part 11 boxes

made of insulating materials.

Amendments to Indian Standards

Amen<;lment No 1 to IS: 1218-1858- Method for tEsting tar andbitumen, determination of phenols

Amendment No 4 to IS: 456-1964 Code ot practice for plainand reinforced concrete (2ndrevision).

Amendment No 1 to IS: 133-1965-Enamel, inferior (a) under

coating (b) finishing; colur asrequired (revised).

IS: 5133-1969(Part III)

Rs

2.00

6.50

4.00