Upload
andr2008
View
2
Download
0
Embed Size (px)
DESCRIPTION
Training
Citation preview
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
1/61
Training Catalogue GSM/GPRS/EDGE-Radio (TCI Personnel)
Tender 83/59
AdministratorText BoxPart 3: Appendix 2: Attachment 1
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
2/61
Table Of Content 1. COURSE CHAIN DESCRIPTIONS ..................................................................................................... 3
1.1. TRAINING OPTION: SERCOA, SERVICE RADIO COMMANDER OBR OPERATION / ADMINISTRATION ... 3 1.2. TRAINING OPTION: SERCDT, SERVICE RADIO COMMANDER OBR DELTA TRAINING......................... 7 1.3. TRAINING OPTION: SESBSDT, SERVICE SBS DELTA TRAINING .................................................... 10 1.4. TRAINING OPTION: SESBSOC, SERVICE SBS OPERATION, ADMINISTRATION AND MAINTENANCE / COMMISSIONING ....................................................................................................................................... 13 1.5. TRAINING OPTION: SESBSPE, SERVICE SBS PERFORMANCE ...................................................... 17 1.6. TRAINING OPTION: SESBSPL, SERVICE SBS PLANNING............................................................... 21
2. COURSE DESCRIPTIONS................................................................................................................ 24 2.1. COURSE: TT5609, SOLARIS FOR USER/SYSTEM ADMINISTRATOR.................................................. 24 2.2. COURSE: TM2100, GSM INTRODUCTION ..................................................................................... 26 2.3. COURSE: TM2110, GPRS/EDGE INTRODUCTION ........................................................................ 28 2.4. COURSE: MN1783-10, RC OBR 7.0 OPERATION ......................................................................... 30 2.5. COURSE: MN1780-10, SBS BR 7.0 SYSTEM OVERVIEW ............................................................. 32 2.6. COURSE: MN1736-10, SBS BR 7.0 PERFORMANCE MEASUREMENT............................................. 34 2.7. COURSE: MN1786-10, RC OBR 7.0 SYSTEM ADMINISTRATION .................................................... 35 2.8. COURSE: MN2585-10, RC OBR 7.0 SYSTEM SPECIALIST ............................................................ 37 2.9. COURSE: MN1708-9, RC OBR 5.5->6.0 DELTA TRAINING........................................................... 39 2.10. COURSE: MN1708-10, RC OBR 6.0->7.0 DELTA TRAINING NEW FEATURES................................. 40 2.11. COURSE: MN1707-9, BSS BR 5.5->6.0 DELTA TRAINING ............................................................ 42 2.12. COURSE: MN1707-10, SBS BR 6.0->7.0 DELTA TRAINING NEW FEATURES ................................. 43 2.13. COURSE: MN1709-10, SBS BR 6.0->7.0 UPGRADE WORKSHOP.................................................. 45 2.14. COURSE: MN1782-10, SBS BR 7.0 OPERATION, ADMINISTRATION AND MAINTENANCE................ 46 2.15. COURSE: MN1784-10, SBS BR 7.0 COMMISSIONING................................................................... 49 2.16. COURSE: MN1888-10, SBS BR 7.0 SYSTEM SPECIALIST FOR GPRS/EDGE ................................. 51 2.17. COURSE: MN1788-10, SBS BR 7.0 SYSTEM SPECIALIST FOR GSM ............................................. 53 2.18. COURSE: MN1790, BSS RADIO NETWORK PLANNING AND OPTIMIZATION...................................... 56 2.19. COURSE: MN1736-10, SBS BR 7.0 PERFORMANCE MEASUREMENT............................................. 59 2.20. COURSE: MN1889-10, E-/GPRS BR 7.0 RADIO NETWORK PARAMETERS..................................... 60 2.21. COURSE: MN1789-10, SBS BR 7.0 RADIO NETWORK PARAMETERS FOR GSM............................ 61
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
3/61
1. Course Chain Descriptions
1.1. Training Option: SERCOA, Service Radio Commander OBR Operation / Administration
Target Group The following curriculum will help you to identify your training needs based on the different job profiles in the Mobile Networks business. Depending on the particular tasks you need to perform and on the depth of knowledge you want to achieve, the following levels of training are possible: - OAM Specialist for Radio Commander OBR - Commissioning Specialist for Radio Commander OBR - System administrator for Radio Commander OBR
Objectives Upon completion of curriculum, participant will be able to: - operate, administer and maintain the Radio
Commander - Commission the Radio Commander according to the
installation test procedure manual. - perform advance database administration and systems
backups of the Radio Commander
Prerequisites Basic knowledge in telecommunications - preferably also in the Mobile Networks field is recommended, but not compulsory.
All prerequisites are given in the curriculum and can be considered as optional if equivalent knowledge was obtained at an earlier point in time.
Content delivery can be combined with Web-Based Training (the latter should be worked through prior to classroom sessions).
Comment If requested, all modules can be adapted to your specific needs within certain pedagogical limits.
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
4/61
OAM Specialist Commissioning Specialist System Administrator
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
5/61
Respective courses:
TT5609, Solaris for User/System Administrator
In this course you will acquire the knowledge necessary to administer a Solaris 2.x system. This is a prerequisite for the subsequent Node Commander administration training. The users and administrators part of Solaris is discussed. Network relevant tasks such as the assignment and administration of addresses, software installation procedures and the application of the Shell Script are covered. Through extensive hands-on training you will be well prepared for the subsequent courses.
TM2100, GSM Introduction
The participant gets an overview on the GSM Transmission Principle, Services, Network Architecture, Protocols & Procedures, Radio Interface and Siemens GSM solution. This course is the basic introduction into the "GSM world" and prerequisite for all succeeding mobile communication courses, e.g. GPRS; EDGE, UMTS, Introduction & Protocol Courses.
TM2110, GPRS/EDGE Introduction
The participant gets an overview on the GPRS principles, advantages, network and protocol architecture, most important procedures, radio transmission, GPRS enhancements by EDGE and the Siemens GPRS solutions.
MN1783-10, RC OBR 7.0 Operation
In this course you learn how to perform all OAM tasks via the RC. This includes fault management, configuration management, software management and management tasks for measurements and tests. The user interface is explained and individual management tasks are shown. Through extensive practical exercises you learn how to perform all tasks and procedures efficiently.
MN1780-10, SBS BR 7.0 System Overview
In this course you acquire a basic understanding of the SBS. The architecture of the PLMN, the connections and the radio interface are explained. The SBS is presented including the architecture, the functions and the configurations. A more detailed look to the BSC, the different BTSE and the TRAU including architecture, functions and configurations completes this overview.
MN2585-10, RC OBR 7.0 System Specialist
In this course you learn how to configure and administrate the OMS-B. You will understand the tasks and the functions including the functional units. The configuration and the administration of the OMS-B database including the Q3 interface, x.25 connections, LAN configurations and access to Oracle will be discussed and appropriate practical exercises
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
6/61
will be done. The application of K1103 and K1205 for tracing of x.25, the backup of the system files, the detection of faults and its elimination complete this practice oriented administration course. Note: This course is not available before 10/99. The duration is estimated to 7 days.
MN1786-10, RC OBR 7.0 System Administration
In this course you learn how carry out the RC commissioning. After an introduction to the concept, the installation test procedures are presented and discussed. You learn, how to create and modify the database and how to perform troubleshooting. The Network Editor is introduced and Backup / Restore procedures are presented. Through extensive practical exercises you become familiar with all installation test tasks and procedures.
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
7/61
1.2. Training Option: SERCDT, Service Radio Commander OBR Delta Training
Target Group The following curriculum will help you to identify your training needs based on the different job profiles in the Mobile Networks business. Depending on the particular tasks you need to perform and on the depth of knowledge you want to achieve, the following levels of training are possible: - Operation Specialist and System Administrators who
have to work with the new version
Objectives Upon completion of curriculum, participant will be able to: - Know the new feature set of Radio Commander and
carry out the relevant operation and maintenance task.
Prerequisites OAM Specialist and System Administrator of previous version.
All prerequisites are given in the curriculum and can be considered as optional if equivalent knowledge was obtained at an earlier point in time.
Comment If requested, all modules can be adapted to your specific needs within certain pedagogical limits.
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
8/61
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
9/61
Respective courses:
MN1708-9, RC OBR 5.5->6.0 Delta Training
In this course you learn how to perform O&M tasks and how to carry out the commissioning of the new RC (OBR6.0). This includes new features in the management of faults and tests, configuration, software and performance measurement. After an introduction to the new commissioning concept, the supplemented installation test procedures are presented and discussed. You learn, how to create and modify the database and how to perform troubleshooting. Through extensive practical exercises you learn how to perform all tasks and procedures efficiently.
MN1708-10, RC OBR 6.0->7.0 Delta Training New Features
This course contains all important changes and improvements of the new Radio Commander version OBR7.0. Starting with new hardware items, all OBR7.0/BR7.0 features will be discussed. Also a brief survey of the changes in the OTS application will be given. It will be delivered online via the Synchronous Virtual University (SVU)
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
10/61
1.3. Training Option: SESBSDT, Service SBS Delta Training
Target Group The following curriculum will help you to identify your training needs based on the different job profiles in the Mobile Networks business. Depending on the particular tasks you need to perform and on the depth of knowledge you want to achieve, the following levels of training are possible: - OAM Specialist for SBS
Objectives Upon completion of curriculum, participant will be able to: - Knows the new feature set of SBS and carry out the
relevant operation and maintenance task.
Prerequisites OAM Specialist and System Administrator of previous version.
All prerequisites are given in the curriculum and can be considered as optional if equivalent knowledge was obtained at an earlier point in time.
Comment If requested, all modules can be adapted to your specific needs within certain pedagogical limits.
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
11/61
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
12/61
Respective courses:
MN1707-9, BSS BR 5.5->6.0 Delta Training
This is a delta course from BR5.5 to BR6.0. You will learn the differences between the two versions with an emphasis on operation and maintenance topics. The new features are explained. Please note that his course is targeted to operation and maintenance personnel.
MN1707-10, SBS BR 6.0->7.0 Delta Training New Features
This is a delta course from BR6.0 to BR7.0. The new features and the new Hardware for BR7.0 are explained. You will learn the differences between the two versions with an emphasis on operation and maintenance topics.
MN1709-10, SBS BR 6.0->7.0 Upgrade Workshop
This is a delta course from BR6.0 to BR7.0. The Upgrade Procedures for LMT and SBS for BR7.0 are explained. Please note that his course is targeted to personnel that is interested in the details of the Upgrade.
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
13/61
1.4. Training Option: SESBSOC, Service SBS Operation, Administration and Maintenance / Commissioning
Target Group The following curriculum will help you to identify your training needs based on the different job profiles in the Mobile Networks business. Depending on the particular tasks you need to perform and on the depth of knowledge you want to achieve, the following levels of training are possible: - OAM Specialist for SBS - Commissioning Specialist for SBS - System Expert for SBS
Objectives Upon completion of curriculum, participant will be able to: - operate, administer and maintain a SBS - commission the SBS according to the installation test
procedure manual - perform advance operation, administration and
maintenance task under consideration of SBS network aspects
Prerequisites Basic knowledge in telecommunications - preferably also in the Mobile Networks field is recommended, but not compulsory.
All prerequisites are given in the curriculum and can be considered as optional if equivalent knowledge was obtained at an earlier point in time.
Content delivery can be combined with Web-Based Training (the latter should be worked through prior to classroom sessions).
Comment Field experience is recommendable prior to attend the courses of the System Expert level
If requested, all modules can be adapted to your specific needs within certain pedagogical limits.
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
14/61
OAM Specialist Commissioning Specialist
System Expert
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
15/61
Respective courses:
TM2100, GSM Introduction
The participant gets an overview on the GSM Transmission Principle, Services, Network Architecture, Protocols & Procedures, Radio Interface and Siemens GSM solution. This course is the basic introduction into the "GSM world" and prerequisite for all succeeding mobile communication courses, e.g. GPRS; EDGE, UMTS, Introduction & Protocol Courses.
TM2110, GPRS/EDGE Introduction
The participant gets an overview on the GPRS principles, advantages, network and protocol architecture, most important procedures, radio transmission, GPRS enhancements by EDGE and the Siemens GPRS solutions.
MN1782-10, SBS BR 7.0 Operation, Administration and Maintenance
In this course for operation, administration and maintenance you will be trained about procedures based on the system manuals for operation and maintenance. You will learn how to operate the equipment, how to change the equipments configurable data and how to maintain the equipment. Through theoretical and practical exercises you will gain the understanding of all your tasks and procedures.
MN1780-10, SBS BR 7.0 System Overview
In this course you acquire a basic understanding of the SBS. The architecture of the PLMN, the connections and the radio interface are explained. The SBS is presented including the architecture, the functions and the configurations. A more detailed look to the BSC, the different BTSE and the TRAU including architecture, functions and configurations completes this overview.
MN1784-10, SBS BR 7.0 Commissioning
The commissioning course focuses on all the procedures in the installation and test manual. You will learn to carry out the commissioning procedures for the network elements. Extensive hands-on training during this course prepares you for the commissioning job.
MN1888-10, SBS BR 7.0 System Specialist for GPRS/Edge
The layers of the Gb air interface, the interface Abis and the Gb interface are explained. GPRS related call flows are traced and analyzed. The GPRS-related BSC database is discussed.
MN1788-10, SBS BR 7.0 System Specialist for GSM
In this course you will acquire a more detailed knowledge of saving of error symptoms and you will learn about further possibilities of fault elimination. The layers 1, 2 and 3 of the air interface Um, the interface Abis and the tasks of the CCS7 on the A-interface are explained. The application of tracers like K1103 and K1205 for capturing of data for further analysis is
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
16/61
included. The BSC database is discussed and you will understand the parameters for cell selection, handover, channel configuration, hierarchical cell structure, radio link failure, overload handling and interference reduction. Through practical exercises you will be familiar with all relevant practices.
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
17/61
1.5. Training Option: SESBSPE, Service SBS Performance
Target Group The following curriculum will help you to identify your training needs based on the different job profiles in the Mobile Networks business. Depending on the particular tasks you need to perform and on the depth of knowledge you want to achieve, the following levels of training are possible: - Performance Expert for SBS
Objectives Upon completion of curriculum, participant will be able to: - realize advance collection of SBS performance data.
Prerequisites Basic knowledge in telecommunications - preferably also in the Mobile Networks field is recommended, but not compulsory.
All prerequisites are given in the curriculum and can be considered as optional if equivalent knowledge was obtained at an earlier point in time.
Content delivery can be combined with Web-Based Training (the latter should be worked through prior to classroom sessions).
Comment If requested, all modules can be adapted to your specific needs within certain pedagogical limits.
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
18/61
Performance Expert
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
19/61
Respective courses:
MN1790, BSS Radio Network Planning and Optimization
This GSM radio planning course gives you all the detailed knowledge of the radio network including all planning relevant parameters. You learn about the planning methods, the mobile radio propagation and the fading. Cell structures are discussed; interference and frequency reuse is explained. The different possibilities of network optimization are presented and the application of relevant planning tools is shown. In practical exercises you will verify your planning results.
TM2100, GSM Introduction
The participant gets an overview on the GSM Transmission Principle, Services, Network Architecture, Protocols & Procedures, Radio Interface and Siemens GSM solution. This course is the basic introduction into the "GSM world" and prerequisite for all succeeding mobile communication courses, e.g. GPRS; EDGE, UMTS, Introduction & Protocol Courses.
TM2110, GPRS/EDGE Introduction
The participant gets an overview on the GPRS principles, advantages, network and protocol architecture, most important procedures, radio transmission, GPRS enhancements by EDGE and the Siemens GPRS solutions.
MN1780-10, SBS BR 7.0 System Overview
In this course you acquire a basic understanding of the SBS. The architecture of the PLMN, the connections and the radio interface are explained. The SBS is presented including the architecture, the functions and the configurations. A more detailed look to the BSC, the different BTSE and the TRAU including architecture, functions and configurations completes this overview.
MN1736-10, SBS BR 7.0 Performance Measurement
In this course you will acquire the knowledge for the capturing of performance data. The counters and counter groups are explained and the objects to be monitored discussed. You learn how to start the measurement jobs and how to capture data. The captured data is forwarded for further evaluation.
MN1889-10, E-/GPRS BR 7.0 Radio Network Parameters
This course gives you all the knowledge of the radio network parameters changed for E-/GPRS.
MN1789-10, SBS BR 7.0 Radio Network Parameters for GSM
This course gives you all the knowledge of the radio network parameters. You learn the basics of radio network planning, the radio network including the cell structures. Radio channel configuration and management, the cell parameters and the algorithms for radio link control are explained. In practical
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
20/61
training you will verify the planned parameters and perform tuning as necessary.
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
21/61
1.6. Training Option: SESBSPL, Service SBS Planning
Target Group The following curriculum will help you to identify your training needs based on the different job profiles in the Mobile Networks business. Depending on the particular tasks you need to perform and on the depth of knowledge you want to achieve, the following levels of training are possible: - Planning Expert for SBS
Objectives Upon completion of curriculum, participant will be able to: - perform mobile networks optimization - understand the parameters of the SBS and their mutual
influence
Prerequisites Basic knowledge in telecommunications - preferably also in the Mobile Networks field is recommended, but not compulsory.
All prerequisites are given in the curriculum and can be considered as optional if equivalent knowledge was obtained at an earlier point in time.
Content delivery can be combined with Web-Based Training (the latter should be worked through prior to classroom sessions).
Comment If requested, all modules can be adapted to your specific needs within certain pedagogical limits.
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
22/61
Planning Expert
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
23/61
Respective courses:
MN1790, BSS Radio Network Planning and Optimization
This GSM radio planning course gives you all the detailed knowledge of the radio network including all planning relevant parameters. You learn about the planning methods, the mobile radio propagation and the fading. Cell structures are discussed, interference and frequency reuse is explained. The different possibilities of network optimization are presented and the application of relevant planning tools is shown. In practical exercises you will verify your planning results.
TM2100, GSM Introduction
The participant gets an overview on the GSM Transmission Principle, Services, Network Architecture, Protocols & Procedures, Radio Interface and Siemens GSM solution. This course is the basic introduction into the "GSM world" and prerequisite for all succeeding mobile communication courses, e.g. GPRS; EDGE, UMTS, Introduction & Protocol Courses.
TM2110, GPRS/EDGE Introduction
The participant gets an overview on the GPRS principles, advantages, network and protocol architecture, most important procedures, radio transmission, GPRS enhancements by EDGE and the Siemens GPRS solutions.
MN1780-10, SBS BR 7.0 System Overview
In this course you acquire a basic understanding of the SBS. The architecture of the PLMN, the connections and the radio interface are explained. The SBS is presented including the architecture, the functions and the configurations. A more detailed look to the BSC, the different BTSE and the TRAU including architecture, functions and configurations completes this overview.
MN1889-10, E-/GPRS BR 7.0 Radio Network Parameters
This course gives you all the knowledge of the radio network parameters changed for E-/GPRS.
MN1789-10, SBS BR 7.0 Radio Network Parameters for GSM
This course gives you all the knowledge of the radio network parameters. You learn the basics of radio network planning, the radio network including the cell structures. Radio channel configuration and management, the cell parameters and the algorithms for radio link control are explained. In practical training you will verify the planned parameters and perform tuning as necessary.
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
24/61
2. Course Descriptions 2.1. Course: TT5609, Solaris for User/System Administrator
Target Group User and System Administrator Objectives The main objective of this course is to give instructions on
the main commands and to enable operating and managing Unix.
Prerequisites PC experience Contents User's Part
- Login, Logout, Password; CDE - Display Commands - Files, Directories, Access Permissions - Messages; Command Line - I/O Redirection; Command Chaining - Background Processes - Terminating of Processes - Shells; vi Commands
Administrator's Part - Monitor Commands - Boot and Shutdown - Creating New Users - Removing a Password - Installing Printers - Directory Backup on Floppy Disks - System Backup on Tapes - Mounting of File Systems
Network - The OSI Model - Ethernet, TCP/IP - /etc/hosts, /etc/hosts.equiv, /.rhosts - rlogin, rcp, rsh
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
25/61
- telnet, ftp Installation
- Partitioning of the Hard Disk - Installation Procedure
Shell Script - Command Procedures; Shell Variables - Passing Parameters - Executive Control; Functions
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
26/61
2.2. Course: TM2100, GSM Introduction
Target Group Managers, Service-, Sales- and Development Personnel, technical sales consultants, Employees needing basic knowledge about everything related to GSM.
Objectives The participant gets an overview on the GSM Transmission Principle, Services, Network Architecture, Protocols & Procedures, Radio Interface and Siemens GSM solution. This course is the basic introduction into the "GSM world" and prerequisite for all succeeding mobile communication courses, e.g. GPRS; EDGE, UMTS, Introduction & Protocol Courses.
Prerequisites Basic knowledge of telecommunication as provided in course TM1004 ("Telecommunication Basic for Technicians"),
Contents Introduction - History - GSM - Current Situation, Market & Trends
Transmission Principles - GSM Network Structure - Duplex Transmission & Multiple Access - GSM - Fixed Network Transmission - GSM Air Interface
GSM Services - GSM Phase1/2 Services - Applications - GSM Phase 2+ Services
GSM PLMN - Overview - Network Elements
Procedures
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
27/61
- Codes & Identities - GSM Security Features - Location Update - Call Setup / Call Handling
GSM Signaling Overview - GSM Signaling Overview
Radio Interface - Physics of Layer 1 - Logic of Layer 1 - MOC / MTC
Siemens Solution - SBS - D900/D1800SSS - Operation & Maintenance
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
28/61
2.3. Course: TM2110, GPRS/EDGE Introduction
Target Group Managers, Service-, Sales- and Development Personnel, Technical-Sales Consultants
Objectives The participant gets an overview on the GPRS principles, advantages, network and protocol architecture, most important procedures, radio transmission, GPRS enhancements by EDGE and the Siemens GPRS solutions.
Prerequisites Good knowledge of GSM equivalent to course TM2100 ("GSM Introduction")
Contents Introduction & Overview - GSM - Current Situation, Services & Applications - GSM Phase 2+
GPRS - General Packet Radio Services - GPRS Objectives & Advantages - Basic Principles - GPRS Architecture - Logical Functions
GPRS Protocols - GSM Phase1/2 Signaling - GPRS User Plane - GPRS Control Plane
The Radio Interface - L1 GPRS/GSM - Channel Bundling / Sharing - Coding Schemes - Logical Channels & Multiframes
Procedures - Activation of GPRS Services - GPRS Identities & PDP States - GPRS Packet Data Transmission
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
29/61
- Combined IMSI & GPRS Attach - PDP Context Activation Procedure - Start of MO Packet Transfer
E-GPRS - EDGE - E-GPRS
GPRS Siemens Solution - Implementation Steps & Future Aspects - Siemens GPRS Support Nodes - GPRS SBS Modifications - Overview: Operation & Maintenance
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
30/61
2.4. Course: MN1783-10, RC OBR 7.0 Operation
Target Group OAM Specialist Objectives Upon completion of this course, the participant will be able
to: - to perform all configurational tasks for SBS via RC OBR- detect and clear faults in an SBS network - to import and export SW - to extract performance data
Prerequisites Basic knowledge of telecommunication networks and the attendance of the course "SBS BR7.0 System Overview" (MN1780-10) or equivalent knowledge is required.
Contents Introduction RC - PLMN management structure - RC/SBS network structure - RC functional structure
RC Operation - Electronic documentation - Log Management - Filter Management - Network Editor for User View Creation - Security Management - User Profile Creation
Configuration Data Handling - Online changes of BSC database - Offline changes of BSC database - CLI, DBAEM
Performance Data Handling - Creation of scanners - Presentation of performance measurements
Software Handling
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
31/61
- Import software to the RC - Download software to the SBS - Activation of software
Alarm Handling - Fault clearance principle - Procedures - Practical exercises for alarm handling on SBS
Comment Minimum/Maximum number of participants: 8/12 Training Method: Instructor-led Hands-on Training This course can also be delivered on-site by the means of
d-Lab. Important hint for On-Site Courses: This course has full d-
lab ability (access to a remote training lab)!
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
32/61
2.5. Course: MN1780-10, SBS BR 7.0 System Overview
Target Group SBS OAM Specialist, SBS Commissioning Specialist, SBS System Specialist, SBS TAC2 Service Technician, SBS TAC2 Service Specialist, SBS Performance Expert, SBS Planning Expert, OTS Operation Specialist, Tool Expert, RC OAM Specialist, RC Commissioning Specialist, RC System Administrator
Objectives Upon completion of this course, the participant will be able to: - have a basic understanding of the Siemens Base Station
System - knows the basic functions of the network elements - remember the interfaces and the SBS architecture
Prerequisites Basic knowledge of telecommunication networks and services is required. The couse GSM Introduction (TM2100) is useful.
Contents SBS Overview - Operation and Maintenance System - Core Network - Radio Access Network - Radio Interface - GSM Basic Features - Data Transmission in GSM Phase 2+ - Location Services
BSC Architecture - Functions - Modules - Rack Configuration
BS24x Architecture - Architecture - Configuration Examples
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
33/61
- BS240XL Details - BS40 / BS41 Details
BS240XS Architecture - Main Features - Architecture - Configuration
PicoBTS Architecture - Main Features - Architecture - Mechanics - Agent - Server Modules
Enhanced MicroBTS Architecture - Main Features - Architecture - Mechanics - Modules - Example Configurations
TRAU Architecture - Functions - TRAU Modules - Rack Configuration
OMC Overview - Radio Commander Hardware - Operation and Maintenane Link
Comment Minimum/Maximum number of participants 8/12 Training Method: Instructor-led Theoretical Training This course can also be delivered on-side.
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
34/61
2.6. Course: MN1736-10, SBS BR 7.0 Performance Measurement
Target Group Performance Management Expert Objectives The participant can configure the Siemens Base Station
System for the collection of performance data and can evaluate this data.
Prerequisites Good knowledge of GSM/DCS network architecture and functions
Contents Introduction - Goals of performance measurement
Overview Measurements Counter - Overview of the Siemens Base Station System - Functions of the counters - SBS performance measurements
Administration of Scanner - Performance measurements handling
Signaling Procedures of the Radio Subsystem - Overview of the system interfaces and protocols - Complete call sequences - Message Flow of Basic Circuit Switched BSS
Procedures - Message Flow of Basic Packet Switched BSS
Procedures Concepts and Evaluation
- Performance measurement concepts - SBS Key Performance Indicators
Practical Examples
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
35/61
2.7. Course: MN1786-10, RC OBR 7.0 System Administration
Target Group RC OBR 7.0 Commissioning Specialist Objectives The participant is able to carry out the installation test
procedures for the RC according to the manual. He can create and modify the RC database by means of the Network Editor.
Upon completion of this course, the participant will be able to: - to install OMTs and OMPs - to create and modify the RC database by the means of
the Network Editor - to restore and backup the database
Prerequisites The courses "RC OBR 7.0 Operation" (MN1783-10), "Solaris for Users/Sytem Administrators" or equivalent knowledge are required.
Contents Introduction to RC Components - Configurations overview - Hardware configuration - Software configuration
Installation Procedures - OMT installation - OMP installation - Alignment of the components - Test procedures
RC Tool Handling - Database Creation - Network Editor
Safeguarding Concept - Concept of backup and restore - Backup procedure
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
36/61
- Restore procedure
Comment Minimum/Maximum number of participants: 8/12 Training Method: Instructor-led Hands-on Training
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
37/61
2.8. Course: MN2585-10, RC OBR 7.0 System Specialist
Target Group RC System Administration - TAC2 Objectives The participant is able to administer the RC database with
OCB and IPA and perform system backups. Furthermore he has a basic understanding the oracle database and can administer x25 and Q3 interfaces.
Prerequisites Courses MN1783Ex,MN1786Ex and NM5609 or UNIX System Administrator
Contents Introduction to RC - Hardware configuration - Software configuration
RC Tool Handling - OMC configuration builder - Interactive panel architect
User Administration - Creation of UNIX users - Creation / modification of application user profiles
Q3 Interface - Administration of Q3 interfaces - Access to TMN
Sun Link X25 - X25 structure - Parameters of X25 - X25 trace
Oracle for RC - Basic Oracle commands - Structure of the RC database
Safeguarding Concept - Backup procedures - Restore procedures
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
38/61
LAN Configurations - TCP/IP networking principles - Administration of a HUB - Administration of router - Remote OMT configuration
Fault Reporting and Symptom Data Provisioning
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
39/61
2.9. Course: MN1708-9, RC OBR 5.5->6.0 Delta Training
Target Group OAM Specialist Objectives Upon completion of this course, the participant will be able
to: - name HW/SW changes of the Radio Commander as well
OBR6.0/BR6.0 features - name new concepts of the OTS and the new
documentation structure of the Siemens O&M network
Prerequisites Knowledge of the OBR5.5 Siemens Mobile Radio O&M network is required
Contents Overview System Upgrade OBR5.5 -- OBR6.0 - Improvements in HW / SW structure
Radio Commander supplemented Handling - Command Line Interface Scripts - Electronic documentation
Operation & Maintenance additional functions - Changes of BSS database - Creation of Managed Objects and their parameters - Q3 interface to BSC
New commissioning Procedures - Installation via CD-ROM - Alignment of the components - Test procedures
Comment Minimum/Maximum number of participants: 8/12 Training Method: Indtructor lead hands-on training
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
40/61
2.10. Course: MN1708-10, RC OBR 6.0->7.0 Delta Training New Features
Target Group OAM Specialist Objectives Upon completion of this course, the participant will be able
to: - name HW/SW changes of the Radio Commander as
well OBR7.0/BR7.0 features - name new concepts of the OTS and the new
documentation structure of the Siemens O&M network
Prerequisites Knowledge of the OBR6.0 Siemens Mobile Radio O&M network is required
Contents Overview System OBR6.x -- OBR7.0 - V480 - Autoloader L8 - Current Configuration Rules - BSC connection capabiltiy of RC - New SW - Licensing - Jukebox Licenses
OBR 7.0 Features - BTS-B with full RC/OTS support - Generation of SMLC e-cita data via pre-calculation
algorithm and by OTS - IP based O-link - Minimum RC_OTS support for TD-SCDMA - Symptom Data provisioning
BR Features - correlated to RC - EDGE Support - Flexible Abis Allocation Strategy (FAAS) - Service dependent Power Control and HO Management
BR Features overview - Overview of all BR Features
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
41/61
Documentation and online help - Changes in the Documentation structure - IMS - Structure
OTS Toolset Delta - EDGE support, SMLC and TD-SCDMA if available
Comment Minimum/Maximum number of participants: 8/12 Training Method: Online Session (Synchronous Virtual
University)
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
42/61
2.11. Course: MN1707-9, BSS BR 5.5->6.0 Delta Training
Target Group SBS OAM Specialist, SBS Commissioning Specialist and SBS System Expert of BR5.5
Objectives Upon completion of this course, the participant will be able to: - know the new features of this BR release - apply this knowledge to perform operation and
maintenance tasks for Siemens Basestation Systems.
Prerequisites Detailed knowledge of the release BR5.5 is essential. Contents Feature Description BR6.0
Overview System Upgrade BR5.5 - BR6.0 Operation & Maintenance: New Functions
Comment Minimum/Maximum number of participants 8/16 Training Method:
- Instructor-led Theoretical Training - Instructor-led Hands-on Training
This course can also be delivered on-side.
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
43/61
2.12. Course: MN1707-10, SBS BR 6.0->7.0 Delta Training New Features
Target Group SBS OAM Specialist, SBS Commissioning Specialist and SBS System Expert of BR6.0
Objectives Upon completion of this course, the participant will be able to: - know the new features of this BR release - Know the new hardware of this BR release - apply this knowledge to perform operation and
maintenance tasks for Siemens Bases Station Systems.
Prerequisites Detailed knowledge of the release BR6.0 is essential. Contents Dynamic Abis Resource Allocation
EDGE: Speeding up into a packet data world MS/Gb flow control Link Adaption Improved Power Control Service dependent Power Control and Handover
Thresholds Support of CS3/CS4 Network controlled cell reselection Handover from GSM to UMTS Transmission Diversity Time Delay IP based O-LINK Common Codec Pool for TRAU Location based Services: Enhanced TA positioning New BSC/120 EMICRO II Upgrade
- Scenarios: BR5.5 - BR7.0, BR6.0 - BR7.0 - Hands-on
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
44/61
Comment Minimum/Maximum number of participants 8/10 Training Method: Instructor-led Theoretical Training This course can also be delivered on-side.
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
45/61
2.13. Course: MN1709-10, SBS BR 6.0->7.0 Upgrade Workshop
Target Group SBS OAM Specialist, SBS Commissioning Specialist and SBS System Expert of BR6.0
Objectives Upon completion of this course, the participant will be able to: - know the theorie of upgrade procedure - Know how to perform LMT upgrade - Know how to perfom SBS upgrade
Prerequisites Detailed knowledge of the release BR6.0 is essential. Contents Upgrade Procedure BR6.0 - BR7.0
- LMT Upgrade - SBS Upgrade
Comment Minimum/Maximum number of participants 8/10 Training Method: Instructor-led Hands-on training This course can also be delivered on-side.
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
46/61
2.14. Course: MN1782-10, SBS BR 7.0 Operation, Administration and
Maintenance
Target Group OAM Specialist, Commissioning Specialist Objectives Upon completion of this couse, the participant will be able to:
- perform standard operation, administration and maintenance tasks via the local maintenance terminal LMT
- use the relevant system documentation
Prerequisites The Course SBS System Overview (MN1780) or equivalent knowledge is essential.
Contents LMT Handling - LMT Hardware and Software - SBS Software on LMT Hard Disk - Start LMT, Log-on and Log-off - Input Handler - Message Browser - Software Management on BSC - Command Line Interface
BSC Maintenance - BSC Fuse and Alarm Panel - Alarm Handling - Fault Clearance
BTSplus Maintenance - Introduction - Fault Clearance - Examples
BTSone Maintenance - Introduction - BTSE Fault Messages - Fault Clearance
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
47/61
- Example TRAU Maintenance
- TRAU fuse and alarm panel - Alarms - Diagnosis - TRAU Fault Message - Fault Clearance
Software tools - DBAEM Tool - LOGDEC Tool - Performance Measurements - Symbolic Navigator
BSC Database - Creation tree - BSC Related Parameters - PCU Related Objects - Carrier Related Objects - TRAU Related Objects - Database Example - Timeslot Assignment on A, Asub, Abis
Xconnect - Configuration - Two Terminating PCMB Lines - Examples
Remote Inventory - Overview - Glossary - Handling - Example
Comment Minimum/Maximum number of partipants: 8/12 Training Method:
- Instructor-led Theoretical Training
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
48/61
- Instructor-led Hands-on Training The course can also be delivered on-site.
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
49/61
2.15. Course: MN1784-10, SBS BR 7.0 Commissioning
Target Group Commissioning Specialist Objectives Upon completion of this couse, the participant will be able
to: - carry out the installation test procedures for the Siemens
Base Station System - use the customer documentation for commissioning - use the Acterna 8631 simulation tool to perform offline
tests
Prerequisites The Courses SBS System Overview (MN1780) and SBS Operation, Administration and Maintenance (MN1782) or equivalent knowledge are essential.
Contents BSC Commissioning - Commissioning Procedure - Visual Inspection - BSC Bring-Up (e. g. load MPCC, download software and
database) - BSC Restart Verification
BS24x/4x Commissioning - Commissioning Procedure - Visual Inspection - BTSE Bring-Up (e. g. software download and activation,
creation of managed objects) - BTSE Restart Verification
E-MicroBTS Commissioning - Commissioning Procedure - Visual Inspection - Commissioning Step-by-Step (software download and
activation, creation of managed objects) PicoBTS Commissioning
- Commissioning Procedure
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
50/61
- Visual Inspection - Commissioning Step-by-Step (e. g. software download
and activation, creation of managed objects) TRAU Commissioning
- Commissioning Procedure - Visual Inspection - TRAU Bring-Up - TRAU Restart Verification
MA10 / Abis Simulation - Cabling of the MA10 - Running Abis Simulation
Remote Inventory - Overview - IDF Handling - Example
Comment Minimum/Maximum number of partipants: 6/8 Training Method:
- Instructor-led Theoretical Training - Instructor-led Hands-on Training
The course can also be delivered on-site.
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
51/61
2.16. Course: MN1888-10, SBS BR 7.0 System Specialist for GPRS/Edge
Target Group GPRS SBS System Specialist; Configuration Management Expert; Fault Management Expert
Objectives The participant can trace all GPRS-related SBS interfaces and interpret the data obtained. The participant understands the relation of the GPRS database parameters.
Prerequisites Training as SBS System Specialist (MN1788); GPRS Introduction (TM2110)
Contents Introduction - Overview: GPRS Interfaces - Protocols used in GPRS-PLMN - Hardware Impacts
GPRS Air Interface - Packet Data Channels, Multiframe Structure, Network
Access etc. - Protocol Stack
Abis Interface - Layer 1 on PCM - PCU Frames
Gb Interface - Layer 1: Physical Realization - Layer 2: Frame Relay and Network Service - Layer 3: BSS GPRS Protocol
Examples: Call Flows - System Info Broadcast - GPRS Attach Procedure - PDP Context De-/Activation - Uplink Temporary Block Flow - Downlink TBF - PS Paging Procedure
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
52/61
- Routing Area and Cell Update - Suspend / Resume Procedure - GPRS Detach Procedure
TCP/IP Service Programs and Applications BSC GPRS-Related Database
- Explanation of Database parameters
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
53/61
2.17. Course: MN1788-10, SBS BR 7.0 System Specialist for GSM
Target Group SBS System Specialist; Configuration Management Expert; Fault Management Expert
Objectives The participant is able to use test equipment like MA10, K1103, K1205, TEMS. He can trace all SBS interfaces, interpret the data and understands the relation of the SBS database parameters.
Prerequisites Training as OAM Specialist, Commissioning Specialist or Network Element Manager and minimum 60 days field experience
Contents The Technical Assistance Center TAC ISO-OSI Model and Protocols
- ISO-OSI layered model - Protocol types in the GSM and GPRS system
Air Interface Um - Layers 1, 2 and 3 - Call Sequences on Um
TEMS - Handling of TEMS
Interface Abis - Layers 1, 2 and 3
MA10 / Monitor Abis - Cabling - Handling
A-Interface - Signalling System CCSS#7 - Complete Call Sequences - Formatting Rules
K1103 and K1205 Protocol Testers - Handling of K1103 and K1205
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
54/61
IMSI Tracing and Cell Traffic Recording Synchronization
- Synchronization in PDH and SDH networks BSC Database
- Creation Tree - BSC, PCU and TRAU Related Parameters - TRX Related Parameters - Database Example
Cell Selection / Cell Reselection Handover
- Types of Handover - Measurement Preprocessing - Threshold Comparison and Handover Detection
Algorithms - Target Cell List Generation - Handover Signalling and Timers - Handover Related Performance Measurements
Channel Configuration - Control Channels - Extended Channel Mode - Related Performance Measurements
Hierarchical Cell Structure HCS - Mobile speed sensitive handover - Priority Layers - Concentric cells - Extended Cells
Radio Link Failure - Parameters, Procedures and Performance
Measurements for Radio Link Failure Overload Handling
- Overload Detection and Counter Measures - Timers and Related Performance Measurements
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
55/61
Interference Reduction - Power Control - Frequency Hopping - Discontinuous Transmission - Channel Allocation due to Interference Level
Error Symptom Saving
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
56/61
2.18. Course: MN1790, BSS Radio Network Planning and Optimization
Target Group Planning Expert Performance Expert
Objectives Upon completion of this course, the participant will be able to: - to perform coverage, capacity and frequency planning - to perform network optimization
Prerequisites The courses MN1780 and TM2100 or equivalent knowledge is recommended.
Contents Introduction - GSM and SBS fundamentals aspects - Planning objectives and principle planning steps - Specifics influencing Radio Network Planning - Site Survey & Site Investigation - Antennas (Types, Parameters, Patterns, Tilts, Heights,
Diversity, Cables and Intermodulation) - Antenna near products (amplifiers, combiners etc.)
Coverage Planning - Definition of terms - Characteristics of radio wave propagation - Radio wave propagation models - Suitable prediction models for different cell types - Location probability - Link Budgets - Rayleigh fading - Log-normal fading - Jakes formula - Interference margin - Noise figure calculations - Path loss balance
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
57/61
- Cell coverage calculation - Nominal cell plan - Basics about digital map data - Principles of planning tools and their usage - Measurements tools supporting cell planning - Cell types - Omni versus sector cells
Capacity Planning - Fundamentals of traffic theory - Erlang-B and Erlang-C formula - Trunking gain - Traffic distribution, forecasting and measurements - Dimensioning (TRXs, Control Channels and Traffic
Channels) - Capacity and cell radius - Dimensioning of terrestrial interfaces
Frequency Planning - Interference - Frequency reuse and reuse patterns - Clusters - Frequency planning strategies - Spectrum efficiency - Optimization of spectrum efficiency - Interference reduction - Frequency hopping - Power Control - VAD/DTX - Interference matrix and analysis - Frequency allocation strategies - Tools supported frequency allocation
Increase of network coverage - Repeaters implementation, types and characteristics
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
58/61
- Decoupling and time delay - Influences of repeaters - Repeater and link budget - Further methods and techniques to increase coverage
Increase of Network Capacity - Spectrum increase - Cell sectorization and splitting - Half rate and adaptive multi rate - Adaptive multi rate - Micro cell planning - Hierachical cell structure planning - Multiple band and mode operation - Cell load dependent handover boundaries
Radio Network Optimization - Reasons for the Need of Optimization - Performance Data Measurements and Drive Tests - Optimization Strategies - Optimization of Physical and Database Parameters - Example Drive Tests
Comment Minimum/Maximum number of participants: 8/20 Training Method: Instructor-led Theoretical Training with
exercises Participants must bring along their pocket-calculators. This course can also be delivered on-site.
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
59/61
2.19. Course: MN1736-10, SBS BR 7.0 Performance Measurement
Target Group Performance Management Expert Objectives The participant can configure the Siemens Base Station
System for the collection of performance data and can evaluate this data.
Prerequisites Good knowledge of GSM/DCS network architecture and functions
Contents Introduction - Goals of performance measurement
Overview Measurements Counter - Overview of the Siemens Base Station System - Functions of the counters - SBS performance measurements
Administration of Scanner - Performance measurements handling
Signaling Procedures of the Radio Subsystem - Overview of the system interfaces and protocols - Complete call sequences - Message Flow of Basic Circuit Switched BSS
Procedures - Message Flow of Basic Packet Switched BSS
Procedures Concepts and Evaluation
- Performance measurement concepts - SBS Key Performance Indicators
Practical Examples
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
60/61
2.20. Course: MN1889-10, E-/GPRS BR 7.0 Radio Network Parameters
Target Group Radio Planning Expert and Performance Management Expert
Objectives The participant has a good understanding of the parameters of the SBS and their mutual influence of E-/GPRS. (e.g. parameters for handover, cell selection, interference reduction etc.) He can thus optimize the configuration and the performance of the SBS for E-/GPRS.
Prerequisites Qualified knowledge of GSM/DCS network architecture and functions, Skills on GSM Radio Network Parameters or Course MN1789
Contents Radio Channel Management - Radio channel configuration
Cell Parameters - Cell selection parameters - Cell reselection parameters
Interference Reduction - Power control mechanism - Frequency hopping - Discontinues Reception
Radio Network Parameters for E-/GPRS Gb Interface Administration
Tender 83/59 Iran Version: 1
Copyright Siemens AG 2004 Confidential
61/61
2.21. Course: MN1789-10, SBS BR 7.0 Radio Network Parameters for GSM
Target Group Performance Management Expert Objectives The participant has a good understanding of the parameters
of the SBS and their mutual influence. (e.g. parameters for handover, cell selection, interference reduction etc.) He can thus optimize the configuration and the performance of the SBS.
Prerequisites Qualified knowledge of GSM/DCS network architecture and functions
Contents Channel Configuration - Control Channels - Extended Channel Mode - Adaptive Multirate
Overload Handling - Detection and Countermeasures
Design of Radio Cells - Cell Selection/Reselection - Handover
Hierarchical Cell Structure - Mobile Speed Sensitive Handover - Priority Layer
Interference Reduction - Power Control - Frequency Hopping - Discontinuous Transmission - Channel Allocation due to Interference Level
Radio Link Failure - Procedures and Parameters