TradeZone Caliper Apr-May 2015

HEADING

SUPPLIERS TO INDUSTRY

WWW.TRADEZONE.CO.NZ

Valid from 1st April to 31st May 2015 • VOL 143

TradeZone proud sponsors of

Proud sponsors of

BE IN TO WIN ThEsE prIzEs By purchasINg aNy prOducT fEaTurEd ON pagEs 14 - 19.

1st prize

XA-RAZORCUT 45 PLASMA CUTTERPrize value $1,780.00 incl. GST

XA-ARC170 DC INVERTER WELDER PACKAGEPrize value $828.00 incl. GST

XA-ARCLITE 140 DC INVERTER WELDER PACKAGEPrize value $550.00 incl. GST

Purchase any TOPTUL products instore and go

into the draw to WIN Hot Laps with TKR Team Kiwi Racing

WELDINGAND FABRICATIONBumper Edition

2nd prize 3rd prize

ABRASIVES

2

Ultra thin CUt Off Wheel a46 - irOn free

Code Description +GST Inclusive 15102010 100 x 1.0 x 16mm $1.83 $2.10 15115010 115 x 1.0 x 22mm $1.91 $2.20 15127010 125 x 1.0 x 22mm $2.00 $2.30

thin CUt Off Wheel - irOn freeCode Description +GST Inclusive 15102016 100 x 1.6 x 16mm $1.91 $2.20 15115016 115 x 1.6 x 22mm $2.09 $2.40 15127016 125 x 1.6 x 22mm $2.17 $2.50 15180016 180 x 1.6 x 22mm $3.74 $4.30 15230019 230 x 1.9 x 22mm $5.13 $5.90

CUt Off Wheels - irOn freeCode Description +GST Inclusive 1810216 100 x 2.5 x 16mm $1.83 $2.10 1811522 115 x 2.5 x 22mm $2.00 $2.30 1812722 125 x 2.5 x 22mm $2.52 $2.90 1817822 180 x 2.5 x 22mm $3.57 $4.10 1823022 230 x 2.5 x 22mm $3.91 $4.50

alUminiUm D/C GrinDinG DisCCode Description +GST Inclusive 6910260 100 x 6.0 x 16mm $3.22 $3.70 6911560 115 x 6.0 x 22mm $3.83 $4.40 7012768 127 x 6.8 x 22mm $4.87 $5.60 7017868 180 x 6.8 x 22mm $5.65 $6.50 7023068 230 x 6.8 x 22mm $10.09 $11.60

flexible D/C DisC - irOn free, Wa46Code Description +GST Inclusive 82310046 100 x 3.0 x 16mm $2.52 $2.90 82311546 115 x 3.0 x 22mm $4.00 $4.60 82312546 125 x 3.0 x 22mm $4.52 $5.20

nOrzOn flap DisCCode Description +GST Inclusive

66623323935 100 x 16mm, 40 Grit $2.87 $3.30

66623323936 100 x 16mm, 60 Grit $2.87 $3.30

66623323937 100 x 16mm, 80 Grit $2.87 $3.30

66623323938 100 x 16mm, 120 Grit $2.87 $3.30

66623323939 115 x 22mm, 40 Grit $3.74 $4.30

66623323940 115 x 22mm, 60 Grit $3.74 $4.30

66623323941 115 x 22mm, 80 Grit $3.74 $4.30

66623323942 115 x 22mm, 120 Grit $3.74 $4.30

66623323943 125 x 22mm, 40 Grit $4.52 $5.20

66623323944 125 x 22mm, 60 Grit $4.52 $5.20

66623323945 125 x 22mm, 80 Grit $4.52 $5.20

66623323946 125 x 22mm, 120 Grit $4.52 $5.20

larGe CUt Off Wheels - irOn freeCode Description +GST Inclusive 1930525 305 x 3.0 x 25mm $7.74 $8.90 1935625 356 x 3.0 x 25mm $9.48 $10.90 1940625 406 x 3.0 x 25mm $17.30 $19.90

D/C GrinDinG DisC a30s - irOn freeCode Description +GST Inclusive 6710260 100 x 6.0 x 16mm $2.00 $2.30 6711560 115 x 6.0 x 22mm $2.52 $2.90 6812768 125 x 6.8 x 22mm $2.87 $3.30 6817868 180 x 6.8 x 22mm $4.43 $5.10 6823068 230 x 6.8 x 22mm $6.17 $7.10

alUminiUm CUt Off WheelCode Description +GST Inclusive 1610216 100 x 2.5 x 16mm $3.65 $4.20 1611522 115 x 2.5 x 22mm $3.74 $4.30 1612722 127 x 2.5 x 22mm $3.83 $4.40 1617822 180 x 2.5 x 22mm $4.43 $5.10 1623022 230 x 2.5 x 22mm $6.00 $6.90

thin alUminiUm CUt Off WheelCode Description +GST Inclusive 66252829984 115 x 1.6 x 22mm $2.87 $3.30 66252829985 125 x 1.6 x 22mm $2.96 $3.40

GrinDinG WheelCode Description +GST Inclusive 66253132996 150 x 25mm x Multi, A36PVS $18.00 $20.70 66253130429 200 x 25mm x Multi, A36PVS $26.35 $30.30 66253133028 300 x 50 x 50.8mm, A24QVS $98.26 $113.00 66253130426 350 x 50 x 50.8mm, A24QVS $131.74 $151.50

abrasives & consumables

3

SpecialiSed inox Ultra thin cUtting WheelS Suitable for cutting stainless steel, mild steel, heat sensitive steels, special alloys & cast iron.

Code Description +GST Inclusive SR9100 100 x 1.0 x 16mm $1.39 $1.60 SR9115 115 x 1.0 x 22mm $1.48 $1.70 SR9125 125 x 1.0 x 22mm $1.57 $1.80

Mitre cUt off SaW 70184646646 405mm, 5.5HP, 3 Phase. Maximum blade diameter 406mm.Motor 5.5HP , 3 phase. Vice opening 140mmWeight 130KG. Emergency stop button.Revolving Vice. Hinged Wheel Guard.

2ply toilet paper 8 pack/48 rollS polybag

EC-2404 Breaks down extremely quickly; ideal for both town

waste and septic tanks, no adverse affects on environment or marine life.

100% Post Consumer Waste Recycled Paper,

not chemically bleached; filtered for whiteness.

1ply centerline - 6 rollS - 300M6/EC3006CP Strong multipurpose towel.

pVc inSUlation tape 19MM x 20MPVC1920-BLACK Black PVC1920-BLUE Blue PVC1920-GREEN Green PVC1920-RED Red PVC1920-WHITE White PVC1920-YELLOW Yellow

10pc Mixed packPVC1920-RAINBOWColours: black, red, white, green/yellow stripe & blue.Sold pkt 10.

kreSto heaVy dUty hand cleaner Starter pack SK29984502 Includes 2 x 2000ml Softbottles & 1 x Black Dispenser. Extra heavy-duty cleanser for tough soils such as grease, oil, ink and carbon black. Contains all-natural, biodegradable walnut shell scrubbers to remove even ground-in dirt. Low solvent content, good skin compatibility. Re-order code for refills - SK87045.

profeSSional inox grinding WheelS Suitable for grinding stainless steel, mild steel and heat sensitive steels.

Code Description +GST Inclusive SR3100 100 x 6.0 x 16mm $2.09 $2.40 SR3115 115 x 6.0 x 22mm $2.26 $2.60 SR3125 125 x 6.0 x 22mm $2.43 $2.80

Wire brUSh With Scraper BRUSHW Hard wearing. Steel bristles.

2ply JUMbo toilet paper - 8 rollS - 300M 3/EC2J300 Breaks down extremely quickly; ideal for both town waste and septic tanks, no adverse affects on environment or marine life. 100% Post Consumer Waste Recycled Paper, not chemically bleached; filtered for whiteness.

big WipeS indUStrial - 80 pack 66 2020 Big Wipes Industrial. One Wipe shifts the lot. Effortlessly clean paint (Oil, water and hammer finish), adhesives, silicone, epoxy, PU Foam, oil, grease and more from hands, tools and surfaces.

$48.10 GST Incl.

$4183

$51.70 GST Incl.

$44 96

$74.80 GST Incl.

$65 04

$24.90 GST Incl.

$2165 $99.00 GST Incl.

$86 09

$13.90 GST Incl.

$12 09

Wire WheelS - High speed 12000rpm. Designed for maximum efficiency at high speeds disc shape maintains full contact giving a fast, positive brushing action.

Code Description +GST Inclusive 28154855 T115 x 6mm x 14 x 2mm, 30K 26G $19.65 $22.60 28504855 HSK100 Multi 26G DP $17.48 $20.10 28505255 HSK115 14 x 2mm - 26G DP $19.57 $22.50

Free Spanner With Each Brush Purchased – While Stocks Last!

$1,433.10 GST Incl.

$1,246 17

$5.00 GST Incl.

$4 35

$1.50 GST Incl.

$1 30 EA

FREEDISPENSER

FREEDISPENSER

FREEDISPENSER

cHEmIcALS / LUBRIcATION

4

zinC it A quick-drying zinc-rich coating that offers similar advantages to hot-dip galvanizing. The premium product of its type where galvanizing requires repair or bare metal requires protection. 95% highest purity zinc in the dried film. Excellent primer, compatible with most standard protective paint systems for metal. Protection for up to 6 years. NZFSA Approved C23.

Code Description +GST Inclusive 2085 350g Aerosol $16.96 $19.50 2185 1 Litre Tin $58.26 $67.00

briGht zinC A quick drying zinc-rich coating for metal protection where a bright galvanized finish is required. Combines superior rust inhibiting properties of zinc with a tough but flexible enamel coating. More than 50% highest purity zinc in the dried film.Protection for up to 5 years. NZFSA Approved C23.

Code Description +GST Inclusive 2087 400ml Aerosol $15.04 $17.30 2187 1 Litre Tin $52.09 $59.90

paint marker pensPermanent paint marker for multi-surface use. Excellent coverage even on difficult surfaces. Fast drying. Durable medium thickness tip with valve action. Suitable for use on wood, metal, concrete, stone, bricks, rubber, glass, textile, paper, enamel, plastic, cardboard, tiles, etc. Indoor and outdoor use.

20365 Black 20369 Blue 20375 Gold

20380 Green 20384 Orange 20388 Red

20392 Silver 20395 White 20400 Yellow

anti-spatter Simple Green® Anti-Spatter is the easy solution to protect your welding equipment and projects from unwanted spatter. It is cost effective, solvent-free and safe for aluminium and steel. Non-flammable and non-hazardous, Simple Green Anti Spatter is plating & painting safe and contains no Silicone. Reduce costly, time-consuming spatter removal. Just spray Simple Green Anti-Spatter on areas to be protected from spatter: nozzles, diffusers & tips, and surfaces adjacent to weld. After welding, rinse with water and dry prior to plating or painting. Cost-effective, safer & solvent-free spatter release solution. Use to protect welding equipment, jigs & work surfaces. Safe for aluminium & steel.

flaW finDer kit Y642543 3 step process. Cleaner, dye & developer kit for detecting cracks in welded joints & engineering components. NZFSA & AsureQuality Approved.

blaCk zinC A quick drying coating with high levels of anti-corrosive zinc complexes for outstanding protection over bare metal. Combines superior rust inhibiting properties of zinc with a tough but flexible enamel coating. Exceptional coloured satin finish. Protection for up to 3 years. NZFSA Approved C23.

Code Description +GST Inclusive 2089 400ml Aerosol $13.30 $15.30 2189 1 Litre Tin $45.04 $51.80

CDt CUttinG Oil - areOsOl - liqUiD - paste A superior neat cutting, drilling, tapping and reaming

lubricant. Contains high performance, extreme pressure additives. Available in aerosol, paste or liquid to suit

every application. Provides very high resistance to temperature, pressure and wear.

For use on all types of metal. Suitable for hand

and machine cutting. NZFSA approved C12.

Code Description +GST Inclusive 3063 400ml CDT Cutting Oil Aerosol $17.30 $19.90 3064 500ml CDT Cutting Liquid $24.00 $27.60 3068 5 Litre CDT Cutting Liquid $139.04 $159.90 3062 500ml CDT Metal Cutting Paste $26.00 $29.90

WelD anti-spatter 400ml aerOsOl 3358 Contains release agents to prevent welding spatter from permanently adhering to metal. Spatter can be easily removed with a wire brush. Suitable on steel, stainless steel, aluminium and alloys. Contains no silicone or petroleum chemicals that may interfere with future coatings. Temperature Range: -20°C to +150°C. NZFSA Approved C12.

$11.90 GST Incl.

$10 35 $77.70 GST Incl.

$67 57

$13.90 GST Incl.

$12 09

$4.40 GST Incl.

$383 EA

$149.80 GST Incl.

$130 26SG13452 946ml RTU SG13457 18.9L RTU

A fifteen year old Amish boy and his father were in a mall. They were amazed by almost everything they saw, but especially by two shiny, silver walls that could move apart and then slide back together again. The boy asked, “What is this Father?” The father (never having seen an elevator) responded, “Son, I have never seen anything like this in my life, I don”t know what it is.” While the boy and his father were watching with amazement, a fat old lady in a wheel chair moved up to the moving walls and pressed a button. The walls opened, and the lady rolled between them into a small room. The walls closed, and the boy and his father watched the small numbers above the walls light up sequentially. They continued to watch until it reached the last number, and then the numbers began to light in the reverse order. Finally the walls opened up again and a gorgeous 24-year-old blond stepped out. The father, not taking his eyes off the young woman, said quietly to his son... “Go get your Mother.”

cUTTINg TOOLS

5

Drill set hss metriC 22pC 174974

1.0 - 10.0mm x 0.5mm rises plus 11, 12, 13mm

with 10mm reduced shank. High speed steel.

traDezOne nO.3m Drill set metriC 25pC 174971TZ High speed steel. 1.0 - 13.0 x 0.5mm rises.

hss step Drill Ideal for sheet metal without pre-drilling. Spiral flute for reduced vibration and greater control through steps. Three flat shank suits 3-jaw chuck.

Code Description +GST Inclusive 107SD0412 4 - 12mm $21.48 $24.70 107SD0420 4 - 20mm $36.96 $42.50 107SD0430 4 - 30mm $68.70 $79.00 107SD0636 6 - 36mm $100.78 $115.90

tap & Drill set - metriC 14pC T3850014 Made from high speed steel. For general purpose use. Taps Sizes: M3 - M12. Drill Sizes: 2.5mm - 10.2mm. Made in Australia.

mUlti-bUrr 4-in-1 tOOl set NORG1000 FOUR of Noga’s most popular multi-purpose blades in ONE innovative tool set. Works best on steel, aluminium and plastic.

DebUrrinG kit NOSP1007 For deburring, cleaning, finishing & countersinking.

CarbiDe bUr set sCb5a B901SCB5A The double cut bur allows for rapid stock removal in harder materials. 6mm shank. Contents: 9.5mm Cylindrical Square, Cylindrical Radius, Tree 12.7mm Cylindrical Square, Cylindrical Radius.

qC ratChet t hanDle tap WrenCh set 4pC 4996-1/2QC Includes ratchet tap wrench,65mm extension and two chucks. Suits tap sizes: M2-M12 & 1/8-1/2”

3 flUte 90° COUntersink setsHSS 5% Cobalt (M35)

sCreW extraCtOr set 10pC 9900-SM2 Set contains 5 x screw extractors: No.1 - No.5 and 5 x Left Hand stub drills: 5/64-19/64”.

3pC aDJUstable tap & reamer set GZ09205 Set Includes: M3.5-M8, M3.5-M10, M7-M14.

tap & Die set 115pC SAV50-S1 Metric/UNC/UNF/BSP/NPT. (2 - 18mm, 4G - 3/4” & 1/8” to 1/4”)

$108.50 GST Incl.

$94 35

$95.80 GST Incl.

$8330

$39.90 GST Incl.

$34 70

$95.20 GST Incl.

$82 78

$85.00 GST Incl.

$73 91

$60.00 GST Incl.

$52 17

$89.90 GST Incl.

$78 17 $56.60 GST Incl.

$49 22 $94.40 GST Incl.

$82 09

$127.00 GST Incl.

$110 43

$155.00 GST Incl.

$134 78

$191.30 GST Incl.

$16635

$315.00 GST Incl.

$27391

NOGA

partinG Off systemParting Insert

Code Description +GST InclusiveGTN2 Width: 2.0mm $8.87 $10.20 GTN3 Width: 3.0mm $9.13 $10.50 GTN4 Width: 4.0mm $9.30 $10.70 Parting BladeNCIH263 26 x 2.0mm, Height: 26.0mm, Insert Width: 2.0mm $37.48 $43.10 NCIH264 26 x 3.0mm, Height: 26.0mm, Insert Width: 3.0mm $37.48 $43.10 NCIH324 32 x 4.0mm, Height: 32.0mm, Insert Width: 4.0mm $41.83 $48.10 ToolholderSLTBN2005 A. Width 20mm, B. Parting Blade Height 26mm $59.74 $68.70 SLTBN2006 A. Width 20mm, B. Parting Blade Height 32mm $63.91 $73.50 SLTBN2506 A. Width 25mm, B. Parting Blade Height 32mm $70.96 $81.60

Other sizes available see in store for details.

BL370-CSK01 3pc. 2-18mm, 4G-3/4” & 1/8-1/4” NPT & BSP

BL370-CSK02 3pc. 10, 14.4, 20.5mm

BL370-CSK03 6pc. 6.3, 8.3, 10.4, 12.4, 16.5, 20.5mm

mEASURINg EqUIPmENT

6

tape measUres magGrip xtra magnetic tip, pocket tape (mx82)

Nylon coated blade giving maximum resistance and durability extending the readability life of the tape. Large magnetic end hook. Thick carbon steel blade. 4 rivets to secure the hook to

the blade for longer service.

DiGital leVel anD prOtraCtOr DL530MLP A digital level with a digital protractor, laser dot and magnetic base. Measure an angle from any surface or reference horizontal. Easily check any angle, ensure columns are vertical and beams are level, square frames, set out balustrades, stairs, check door and window frames, and transpose reference points. Reads in %, mm/m, degrees and inches per foot. Store measurements, recalibrate easily, set audible alarm at any angle. Angle Accuracy +/-0.1 degrees. Laser accuracy +/-3.0mm/10m.

Vernier CalipersCarbon Steel.Graduations: 0.02mm/0.001”.

5 DOt Green beam laser 5DGBL A laser with 5 perpendicular dots for interior set out. Green beam lasers are four times more visible than red . The “dots” are in a star pattern to make finding the centre easy. Plumb columns and ensure beams are level, set out for fabrication, get a horizontal level reference across a structure, with the multi purpose base which has magnets, survey & camera tripod threads, and screw holes for mounting directly to framing. A great level packed with features. Accuracy ±9mm @ 30m, c/w multipurpose base, and soft bag.

COmbinatiOn sqUare set 300mm M404 Case hardened and ground. Set consists of Combination Square, Protractor Set and metric 300mm rule. Set comes in handy plastic case with blow moulded inner to keep set safe when not in use.

Vernier Calipers

530-118

0-8”/ 0-200mm 0.02mm .001”

530-312

0-6”/ 0-150mm 0.02mm .001”

tape measUres Printed both sides of blade.

150mm DiGital leVel DL150M A 150mm long digital inclinometer with a pipe groove and magnetic base. Accurate to +/- 0.1 degrees. Audible alarm which beeps faster as you get closer to horizontal becoming a continuous tone. Measures in degrees and percentage. The perfect tool for setting up pipework, scaffolding, fabrication or machining. Comes with a soft bag which has a belt loop to make sure you always have it with you. Accurate to +/- 0.1 degrees. Audible alarm.

eleCtrOniC VerniersFine adjustment.M770 150mm/6” Met/Imp/Fraction 3 Scale

M771 200mm/8” Met/Imp/Fraction 3 Scale

laser - staff & tripOD RL430S A dual slope laser, auto levelling in horizontal and vertical, c/w staff and tripod. This is a contractor’s laser designed for the construction industry, build houses, fencing, driveways, run drainage, Rubber cased, rugged and waterproof to withstand harsh conditions. 10% slope in two axis, IP66, can withstand high pressure jets of water, 600 metre working diameter, ± 2.25mm in 30 metres accuracy, Infra Red remote control, Lithium Ion rechargeable batteries.

apOllO heaVy DUty bOx leVels With GripPlumbsite dual view vials.

hanDy leVel KL246 100mm/4”Accuracy: 0.5mm/mShockproof solid acrylic vial

$19.90 GST Incl.

$17 30

$56.90 GST Incl.

$49 48

$60.90 GST Incl.

$5296

$109.00 GST Incl.

$94 78 $79.00 GST Incl.

$68 70

$10.00 GST Incl.

$8 70

$85.90 GST Incl.

$74 70

$36.00 GST Incl.

$3130

$30.90 GST Incl.

$26 87

$27.90 GST Incl.

$2426

$82.40 GST Incl.

$7165

$66.90 GST Incl.

$58 17

$36.10 GST Incl.

$31 39

$32.80 GST Incl.

$28 52

$577.20 GST Incl.

$501 91

$186.50 GST Incl.

$16217

$419.60 GST Incl.

$36487

$1,811.10 GST Incl.

$1,574 87

BRANDNEW

MODEL

HOTDEAL

VERYHANDY

TA3356 8m x 25mm TA3360 8m x 32mm

TA3795 8m x 27mm Stainless steel

TA3840 8m x 27mm Hi-Viz with larger print

M400 150mm/6” M402 200mm/8”

KL985-41P-100 100cm KL985-41P-120 120cm

mEASURINg / PUNcHES / cHISELS

7

Jenny Caliper 150mm GZ01540 Manufactured from selected steel. Very useful in layout work for locating and testing centres, laying off distances from an edge etc. Working faces hardened to 58 HRC.

tape measUre 8m x 25mm 750-8000T Cushioned blade stop. Impact resistant. Neon Green. TradeZone branded.

COlD Chisel With strike GUarD302-0620 300mm x 25mm.Comfortable grip. CRV for long life. Guaranteed Forever.

straiGht eDGes

9pC pin pUnCh set KT1009PR Sizes: ∅ 2 x 30, ∅ 3 x 40, ∅ 4 x 50 , ∅ 5 x 50, ∅ 6 x 50, ∅ 8 x 50 , ∅ 10 x 65, ∅ 12 x 70, ∅ 14 x 75

Centre pUnCh set 5pC M7070005 Made from high quality chrome vanadium steel, black oxide. The point is hardened and tempered to withstand continuous use. Ergonomic soft rubber grip provides comfort and safety. Sizes 2, 3, 4, 5, 6mm.

sCaffOlDers leVel 250mm ST81SM-250 250mm long with magnets in base. Milled working face. Pressure die-cast light alloy body. Highly shock absorbent.

enGineers rUles Accurate to JISB7516, Grade 1, etched markings, Industry standard.

Code Description +GST Inclusive

150B6 150mm/6” $10.35 $11.90

30012 300mm/12” $16.52 $19.00

60024 600mm/24” $37.83 $43.50

100036 1000mm/36” $77.39 $89.00

pin pUnCh set 6pC 621-2106 1.5, 3, 4, 5, 6, 8mm. Guaranteed Forever.

prOtraCtOr - 180° 301955 For accurate angle, depth and length measurements. 180° along with 100mm rule. Photographically etched markings for ultimate precision and accuracy.

COlD Chisel set 4pC KT11104PR Sizes 17.1 - 29.3mm width. Rib style. Sturdy steel stand.

nUmber & letter pUnCh sets Manufactured from selected quality carbon steel. Punches are through induction hardened, which gives durability and extended life for repeated use.

$14.90 GST Incl.

$12 96

$69.90 GST Incl.

$60 78

$13.90 GST Incl.

$12 09

$86.00 GST Incl.

$74 78

$59.00 GST Incl.

$51 30

$25.80 GST Incl.

$22 43

$19.90 GST Incl.

$17 30 $60.50 GST Incl.

$52 61

$37.80 GST Incl.

$32 87

$14.90 GST Incl.

$12 96

$68.70 GST Incl.

$59 74 $51.50 GST Incl.

$44 78

GZ25905 Number Punch Set 6mm

GZ26105 Letter Punch Set 6mm

SE600 600mm SE1000 1000mm

Manufactured in Japan from aluminium. Markings are metric.

HOTPRIcE

$23.90 GST Incl.

$20 78

HAND TOOLS - VARIOUS

8

ball pein hammers Forged medium, carbon steel. Hardened and tempered black baked paint finish, polished face, poll, cheek and pein. Fibreglass handle with deluxe rubber grip.

Code Description +GST Inclusive HB1607 8oz $21.74 $25.00 648329H 16oz $26.00 $29.90 648330H 24oz $34.70 $39.90 648331H 32oz $38.17 $43.90

aDJUstable prybar 301186 Adjusts 540 - 810mm. Podger end designed for aligning and prying.

hexaGOnal pODGer bar 5POB60020 600 x 20mm. For leveling and aligning , forged tapewr.

7” tin snips Short tin snips made of drop forged chrome-moly steel. Hardened to HRC 60-62. Two component handle. With spring and locking lever. Cuts sheet metal: 1.5mm. Cuts stainless sheet metal: 0.9mm. 491-7 Straight 493-7 Straight/Right 494-7 Straight/Left

blU-mOl xtreme hanD saWsCuts 50% faster than traditional saws.Professional hand saw for medium to thick material such as timber, plywood, fibreboard and chipboard.Thick blade for high precision and straight cutting with exceptionally good stability and comfort.Hard pointy teeth for longer lasting sharpness.3 side cut, 7 teeth/8 points.

COmbinatiOn aDJUstable WrenChes Manufactured in Sweden since 1892. Features an adjustable jaw that allows the tightening and release of both pipes and bolts/nuts. Measurement scale on the head makes it easy to adjust the jaw opening and to estimate the size of the nut. Deeply ridged surface on the adjusting screw makes changing the jaw position easy. Wide, edge-free grip fits your hand well and provides low even pressure. Soft high-friction gripping surface reduces the risk of slipping. The handle grip resists oil and grease and never feels too cold or hot. 15 degree angle for maximum access in confined spaces. Parallel jaw faces. Narrower and thinner jaws for better access. Engineered stronger than the demands set by ISO and US standards. One piece forged steel handle for extra strength.

WelDinG hammers Excellent balance with ground & sharpened ends.5WHRG Alloy Head, Rubber Grip 5WHSP Alloy Head, Spring Grip

bOlt-Grip Clam setsTo remove recessed fasteners including broken, damaged, or rusted nuts, bolts and screws. Universal holder design fits all types of fasteners.

bOlt CUtters

COmbi CUtter E6100 Stainless steel, serrated cutting blades, cuts a wide range of materials.

$13.90 GST Incl.

$12 09 $14.60 GST Incl.

$12 70

$91.70 GST Incl.

$79 74

$96.80 GST Incl.

$84 17

$19.90 GST Incl.

$17 30 $16.40 GST Incl.

$14 26

$56.50 GST Incl.

$4913

$39.90 GST Incl.

$3470 $46.20 GST Incl.

$4017 $65.40 GST Incl.

$5687

$73.90 GST Incl.

$64 26

$43.90 GST Incl.

$38 17 EA

$30.90 GST Incl.

$2687 EA

PEANUTSLAB

POWERBUILT CAP

gREATSELLER

$38.90 GST Incl.

$3383 $62.50 GST Incl.

$5435 $47.50 GST Incl.

$4130 $75.90 GST Incl.

$66009070P 150mm/6” 9071P 200mm/8” 9072P 250mm/10” 9073P 300mm/12”

T1859147 6PC Size range: 1/4” to 1/2”.

T1859148 8PC Size range: 1/4” to 1/2”.

BLX483-14 350mm (14”) BLX483-19 475mm (19”) BLX483-22 550mm (22”)

315-0270 350mm/14” 315-0275 450mm/18” 315-0271 600mm/24”

HAND TOOLS - PLIERS

9

fUller-prO pliers

Code Description +GST Inclusive 405-1907 Side Cutting Pliers 175mm/7” $17.30 $19.90 405-1926 Long Nose Pliers 150mm/6” $12.96 $14.90 405-1928 Long Nose Pliers 200mm/8” $17.30 $19.90 405-1947 Linesman Pliers 175mm/7” $13.83 $15.90 405-1948 Linesman Pliers 200mm/8” $17.30 $19.90 405-1958 End Nipper Pliers 200mm/8” $17.30 $19.90

GrOOVe JOint pliers Code Description +GST Inclusive 400-0113 250mm/10” $14.26 $16.40 400-0114 300mm/12” $17.30 $19.90 400-0117 400mm/16” $33.74 $38.80

hi leVeraGe pliers 404-2907 188mm Diagonal Pliers 404-2948 200mm Linesman Pliers

ChannellOCk pliers Channellock blue comfort grips for less hand fatigue.

Code Description +GST Inclusive T3248 Linesman Pliers, 215mm/8” $60.00 $69.00 T338G Diagonal Pliers, 200mm/8” $52.09 $59.90 T440 Groove Joint Plier, 305mm/12” $43.39 $49.90

CirClip plier set 6pC KT42116GP Contains: 180mm Internal & External Straight pattern 180mm Internal & External Angled pattern 250mm Internal & External Straight pattern

plier lOCkinG Chain Clamp DMAB1A18 450mm/18”.

Vise-Grip pliers set 3pC T1775148 ProTouch grips provide extra comfort for less hand fatigue. Machined jaws for maximum gripping strength. Induction hardened long nose cutting edge stays sharper longer. 175mm Diagonal Cutter. 200mm Long Nose.200mm Combination.

CirClip plier set 4pC hD GPAQ0402 7”Straight Internal & External, 7” Bent Internal & External NEW H/D version.Heavy duty canvas wallet.

Chain Grip plier 225mm KT6655-09 Chain can hold around any shape or size using 20” chain. Convenient for awkwardly shaped pieces. With adjusting screw and release lever. 20” chain length. Chrome vanadium alloy steel plus chain.

hOOk & sCraper set 301008BP Contains multi purpose scraper 285mm, multi purpose scraper 210mm, scratch awl 200mm, cotter pin puller 225mm, radiator hose remover 175mm.

plier set 2pC402 Set of two pliers - No. 401-10 with serrated adjustable jaws and pipe grip, and No. 404-6 with extra narrow jaws, pipe grip and cutters. Satin finish.

$53.20 GST Incl.

$46 26

$41.60 GST Incl.

$36 17

$33.00 GST Incl.

$28 70

$49.00 GST Incl.

$42 61

$37.50 GST Incl.

$32 61

$113.90 GST Incl.

$99 04

$23.90 GST Incl.

$20 78 EA

$136.30 GST Incl.

$11852

SCRAPER

BEST DEAL

BE IN TO WIN HOT LAPS


RIVETERS / ScREWDRIVERS

GET ORGANISED WITH TENG!TC-Tray™ Modular System.



10

inDUstrial leVer riVeterJBAB3264 4 interchangeable heads. Rivet sizes - 3.2, 4, 4.8, 6.4mm. Overall length 450mm. Aluminium body, steel tube with rubber grip. Lever handle design reduces physical strength required when using.

heaVy DUty lOnG arm riVeter HR003 Features spring loaded handle with nose wrench. Complete with 3 interchangeable nozzles for setting rivets 3.2mm, 4.0mm and 4.8mm. Made in Japan.

anGle DriVe 90°FTGC0808 900 angle driver allows access to tight corners. 3600 rotating position handle for optimum control.

mini ratChet bit set 15pC 1/4”Dr metriC KT2515MR Contains: 6pt standard sockets: 5-8mm, Phillips bits: No. 1 & 2, Torx bits: T10-T20 Hex bits: H3-H6, Mini ratchet.

sCreWDriVer set 6pC 108-1016 Contains:

2 Slot, 2 Phillips and 2 Square Drive. Each screwdriver has magnetic tips.

Guaranteed forever. Wall rack included.

insUlateD sCreWDriVer set 7pC 121-1107 Comes with case. Chrome vanadium blades.Insulated to 1000v.Guaranteed forever.

heaVy DUty lazy tOnG riVeter HR005 Designed for strength and lightness with easy operation. Working parts are of hardened and tempered alloy steel. Complete with 3 interchangeable nozzles for setting rivets 3.2mm, 4.0mm and 4.8mm Made in Japan.

hanD riVet tOOl HR001 Features spring loaded handle with nose wrench. Complete with 4 interchangeable nozzles for setting rivets 2.4mm, 3.2mm, 4.0mm and 4.8mm. Made in Japan.

sCreWDriVer set 10pC CTCSDIND10 Tang-Thru shaft from tip to strike cap, withstands hammer blows. Chrome Vanadium steel shafts for industrial strength and rust resistance. Hardened and magnetised tips. Wall mountable carry case. Set contains 5x slotted & 5x phillips screwdrivers.

pOCket impaCt pOWer bit set 5pC T9097011 Impact Phillips Head #1, #2, #3, Square Head #2 and Hex 5mm x 50mm.

sCreWDriVer set 3pC extra lOnG GAAE0306 Slotted 5.5 x 400mm, 6.5 x 400mm Phillips 2 x 400mm Cushion Super Grip handles.

hOOk & pin set TTHP08 Tray Size: 265 x 142 x 50mm. Set consisting of 3 combined pin/hook spanners with 3 pin adaptors & 2 spare pins in diameters 6 & 8mm. Fits in Teng Tools tool boxes and roller cabinets.

$59.90 GST Incl.

$5209

$31.10 GST Incl.

$27 04

$32.90 GST Incl.

$28 61

$33.80 GST Incl.

$29 39

$18.50 GST Incl.

$16 09

$89.00 GST Incl.

$77 39

$45.00 GST Incl.

$39 13 $94.70 GST Incl.

$82 35

$69.00 GST Incl.

$60 00

$214.00 GST Incl.

$186 09

$155.00 GST Incl.

$134 78

$179.00 GST Incl.

$15565

$10.20 GST Incl.

$887

3/8” & 1/2” bit set 40pC GAAD4002

10mm hex bits. Selection of Long bits, Spline, Hex, Star bits 3/8 & 1/2”. Quick change

bit holder.

SAfETY PRODUcTS

11

WelDinG helmet 633-PA Blue Eagle Flip front welding helmet. Complete with lenses 51x108mm. Standards [CE EN175] [ANSI Z87] [CSA Z94.3].

WelDers GlOVes - 40Cm W-1501 A Grade. Red Welders glove/welted seams. Patch palm for extra protection.

GO-speCs ii WelDinGFor gas welding. AS/NZS Standards 1337.1.2010.ANSI Z87.1-2010 (+) and CE EN-166. Flame retardant foam lined and FR strap GG-45WS3AF Shade 3 GG-45WS5AF Shade 5

WelDinG CUrtain Heavy duty PVC welding curtain.

Electronically welded hems, seams. Grommeted and ready to hang. Use around Mig, Tig, Arc, Plasma, Gas

or other high amperage welding arcs. Filters Far/Near UV radiation and Blue Light.

Allows more light into welding booth.

GlOflash fr200 WelDers shirt WS445603 100% 200gsm Cotton Drill Fabric. Closed Front Style with no exposed buttons. 2 velcro Flap Chest Pockets. Hi-Viz fabric complies with ASNZS 1906.4. Hi-Viz Orange/Navy, Hi-Viz Yellow/Navy. Sizes small to 4XL.

GO-speCs ii Use indoor or outdoor, protects against dust, sand, cement, chemicals, heat, humidity and more! The worker now has a choice of comfort and protection with the Go-Specs II system. Ballistic Vo Rated.SuperCoat™ anti-fog coating. AS/NZS Standards 1337.1.2010.ANSI Z87.1-2010 (+) and CE EN-166. Flame retardant foam lined and FR strap . GG-45AAF Amber Lens GG-45CAF Clear Lens

flexinet DispOsable mask - 10pC bOx JS-823MLB P2 carbon disposable mask, exhalation valve provides the wearer with additional comfort. Flexinet style assists with fit and comfort, plus provides a more durable disposable mask. Protects against dust, mist and fumes. AS/NZ standard 1716:2003

earmUffs - neCkbanD styleSlimline hearing protection, with neckband, so can be worn under helmets, for example welding helmets. Comfortable and lightweight for long term wear. AS/NZS 1270:2002.

WelDinG blanket - 1800 x 1800mm WB6636-5180Carbonized acrylic felt for use in horizontal applications, with severe exposures such as that resulting from molten substances or heavy horizontal welding. Designed to prevent the ignition of combustables located adjacent to the underside of the pad. No grommets.

WelDinG COVer lens - 100pC bOx CR-39/100 Long life clear cover plate 51 x 108mm. Superior spatter resistance. Provides protection for your welding lens.ANSI Standard ANSI Z87.1.not to be used as impact plate.

$18.90 GST Incl.

$16 43

$39.90 GST Incl.

$34 70 $32.90 GST Incl.

$28 61

$11.90 GST Incl.

$10 35

$42.90 GST Incl.

$37 30

$69.90 GST Incl.

$60 78

$25.90 GST Incl.

$2252 EA

$21.00 GST Incl.

$1826 EA

$179.00 GST Incl.

$155 65

$143.80 GST Incl.

$125 04

FLAMERETARDANT

HB-1994 Class 5, L1N Slimline

HB-3460 Class 4, L0 Slimline

HEAVYDUTYPVc

$85.00 GST Incl.

$73 91

WC6636-25 1800 x 1800mm

BACKHAND PAD

cLAmPS

12

miG WelDinG pliers 200mm PA0281 Specifically designed for CO² Welding Torches. Heat treated, carbon steel, PVC Handle. Serves 8 multi-functions.

lOCkinG C-Clamps

CUrVeD JaW lOCkinG plier 175mm/7” T7CR Curved jaws put tremendous pressure on four points of any style nut or bolt head and better fits on round stock. Can be used as a non-slip pipe wrench, pliers, adjustable wrench, emergency handle and all purpose clamp.

meDiUm DUty G-Clamp - Cast irOn I-Braced design, cast from strong SG Ductile iron. Adjustable steel swivel shoe to help clamp uneven surfaces.

Code Description +GST Inclusive T120/4 100mm (4”) $20.26 $23.30 T120/6 150mm (6”) $26.00 $29.90 T120/8 200mm (8”) $39.04 $44.90T120/10 250mm (10”) $56.22 $65.00 T120/12 300mm (12”) $84.00 $96.60

WelDinG maGnets AGS0140 112mm Welding Magnet AGS0141 240mm Dual Rotating Welding Magnets AGS0142 4pc 60mm Welding Magnets

T11R Regular Tips 275mm/11”

T11SP Swivel Pads275mm/11”

T6R Regular Tips 150mm/6”

T6SP Swivel Pads 150mm/6”

WOODWOrkinG ClampsUnique locking device. The thread of the stud bolt locks into the teeth of the rail when the arm tilts. Clamping force up to 6,000N. High quality 2-component plastic handle. Pressure plates can be replaced by hand, no tools required. Stable profiled rail with serration is resistant to torsional forces. Suitable for wood.

WelDinG ViCe WV125 125mm jaws.Fits all shapes and sizes of steel for right angle welding. Copper thread for conductivity.

tenG WelDinG maGnetsFor welding and mounting work at 90° or 45° angles.

MH75 Max width: 120mm. Height: 82mm

MH90 Max width: 160mm. Height: 100mm

WelDinG plier set 4pC TTPSPG TC-Tray™ Modular System - GET ORGANISED WITH TENG! Tray Size: 560 x 265 x 40mm Set containing c-clamp, welding pliers, sheet metal pliers & 6” long nose power grip pliers.

$27.60 GST Incl.

$24 00

$29.90 GST Incl.

$26 00 $32.80 GST Incl.

$28 52

$48.00 GST Incl.

$41 74 $52.00 GST Incl.

$45 22

$35.90 GST Incl.

$31 22

$12.10 GST Incl.

$10 52

$21.90 GST Incl.

$19 04 $106.70 GST Incl.

$9278

$119.00 GST Incl.

$103 48

POWERBUILTCAP

$9.90 GST Incl.

$861 EA

Code Description +GST Inclusive B6000 100 x 50mm (TG10) $14.87 $17.10 B6001 160 x 80mm (TG16-2K) $25.22 $29.00 B6002 200 x 100mm (TG20-2K) $35.65 $41.00 B6003 250 x 100mm (TG25S10-2K) $39.57 $45.50 B6004 300 x 120mm (TG30S12-2K) $44.61 $51.30 B6005 400 x 120mm (TG40S12-2K) $51.48 $59.20 B6006 500 x 120mm (TG50S12-2K) $53.74 $61.80 B6007A 600 x 140mm (TG60S14-2K) $76.17 $87.60

regular tips: Wide opening jaws provide greater versatility - can clamp wide variety of shapes

swivel pads: Hold tapered work, awkward fabricating jobs, delicate, without damaging the work surface.

IRWIN VISE-GRIP are the Original locking tool, with a classic trigger release, are designed to provide maximum locking force.

IRWIN VISE-GRIP are the Original locking tool, with a classic trigger release, are designed to provide maximum locking force.

cLAmPS / VIcES

13

pipe pliers 360mm - Crank hanDle CLAM-PVS100 Large capacity 75mm opening, a generously sized 38mm swivel pad on the top jaw, an adjustable V-Pad on the bottom jaws hold, round, square, flat, or angled stock. Crank handle for fast and easy jaw opening and pressure adjustment, ability to crank up, or lessen the torque by inserting a screwdriver into the crank handle.

sheet metal pliers - Crank hanDle CLAM-PDB80 Parallel opening 10mm, OAL 250mm Wide, robust contact plates provide a powerful hold on stock. Crank handle for fast and easy jaw opening and pressure adjustment, ability to crank up, or lessen the torque by inserting a screwdriver into the crank handle.

Drill press Clamp CLAD-PTD09 Crank handle for fast and easy jaw opening and pressure adjustment. Locks onto drill press bed for easy clamping.

C-Clamp base Grinder rest With Vertical mounting plate CLAM-MGK53

magnetic base Grinder rest MAGW-MGH45

lOnG nOse pliers - Crank hanDle CLAM-PLN50 Parallel opening 5mm, OAL 205mm.

C JaW pliers - Crank hanDle Crank handle for fast and easy jaw opening and pressure adjustment, ability to crank up, or lessen the torque by inserting a screwdriver into the crank handle.

Code Description +GST Inclusive CLAM-PCJ50 Opening 26mm, OAL 180mm $12.96 $14.90 CLAM-PCJ70 Opening 40mm, OAL 245mm $16.09 $18.50 CLAM-PCJ100 Opening 41mm, OAL 300mm $18.70 $21.50 CLAM-PCJ120 Opening 55mm, OAL 360mm $27.39 $31.50

lOCkinG C Clamps Code Description +GST Inclusive CLAM-PR115 Round Tip, 280mm. Throat 83mm. Opening 102mm $25.22 $29.00 CLAM-PR115S Swivel Pads, 280mm. Throat 83mm. Opening 102mm $27.74 $31.90 CLAM-PR6 Round Tip, 165mm. Throat 46mm. Opening 56mm $17.39 $20.00 CLAM-PR6S Swivel Pads,165mm. Throat 46mm. Opening 56mm $20.00 $23.00

Unbreakable enGineers prOfessiOnal ViCes

Made from Unbreakable SG Iron – provides durability & strength over standard Grey Cast Iron.

Hardened & Tempered Jaws for longer life.

C-JaW pliers - With hammer heaD CLAM-PCH10 Opening 40mm, OAL 300mm M10 Threaded hole for mounting grounding lug, crank handle for fast and easy jaw opening and pressure adjust-ment, ability to crank up, or lessen the torque by inserting a screwdriver into the crank handle.

$39.90 GST Incl.

$3470 $29.90 GST Incl.

$26 00

$16.90 GST Incl.

$14 70

$39.90 GST Incl.

$34 70

$32.40 GST Incl.

$2817 $38.50 GST Incl.

$33 48

$27.90 GST Incl.

$24 26

$149.00 GST Incl.

$129 57

VICB-PSG100 100mm/4” $40 trade-in on any old vice

$239.00 GST Incl.

$207 83


$199.00 GST Incl.

$173 04

VICB-PSG125 125mm/5”$40 trade-in on any old vice

$329.00 GST Incl.

$286 09


base GrinDer restsStore your Grinder and all accessories on one convenient, compact, portable rest for easy access. Holds disc, store wrench and has a cable wrap hook.

WELDINGWELDING

C/w XA17 x 8m Tig Torch, Arc Set & Flow Tube Regulator

XA-TIG180P TIG HF

XA-TIG180PR-SP

$1,429.00 GST Incl.

$1,24261+GST

New Generation Technology Razorweld

RAZORWELD ARC180MMA/TIG 180A DC INVERTERPOWERFUL & PORTABLE WITH SAFE CARRY CASE

$649.00 GST Incl.

$56435+GST

MONTH 24Machine Warranty

XA-ARC180RZ-SP

POWERFUL 200 AMPS WITH SELECTABLE VRDPERFORMANCE PROVEN!RELIABILITY CONFIRMED!

C/w - Arc Set 4mTig Torch is optional and extra

XA-ARC200 NO FRILLS DEAL!

$765.00 GST Incl.

$66522+GST

Compliant to AS/NZ 60974-1 Standard

XA-ARC200-SP

WARRANTY

Tig Torch is optional and extra

• 240V Single Phase• Duty Cycle 50%@180Amps MMA 25ºC• Hot Start• Anti Stick• Arc Force• Generator Compatible (9KVA)• DC TIG Welding Lift Arc Ignition• Compact (320 x 120 x 210mm)• Light Weight (4.5 Kgs)

BULK BUY FACTORY DEAL

• On/Off VRD Select • Electrode Hot Start • Adjustable Arc Force • Tig Lift Arc - Soft Start • 50% Duty Cycle • 10 -200 Amps • Weighs 8.2 Kg • Generator Compatible

180 AMP DC TIG INVERTER WELDER

WARRANTY

• 240V Single Phase• DC TIG HF Arc Ignition • 2T/4T Trigger, Spot Time• Pulse Function, Low - High • Post Gas Flow Control • Down Slope Control • Remote Control Ready • MMA Hot Start • MMA Arc Force Control • Approved to AS/NZ 60974-1

DIGITAL INTERFACE WITH JOB RECALL


• AC/DC TIG HF Arc Ignition • AC Square Wave Balance Control • Pulse Frequency 0.5 - 200Hz • Peak & Base Current Control • Pulse Width Adjustment• 2T/4T Trigger, Spot Time• Start & Final Current Control • Pre & Post Gas Flow Control • Up & Down Slope Control • MMA Arc Ignition Control • MMA Arc Force Control • Approved AS/NZ 60974-1 Standard


RAZORWELD TIG200 AC/DC DIGITAL


XA-TIG200RZACDC-SP

$2,995.00 GST Incl.

$2,60435+GST

Power Supply 230V +/- 15%Duty Cycle @ 25°c 80% @200 AmpsCurrent Range TIG AC 10A - 200 AmpsCurrent Range TIG DC 05A - 200 AmpsCurrent Range MMA 20A - 160 AmpsRated Power 5.4 KVAWeight 18 KgDimensions (LxWxH) 310x430x550mm

• MIX AC welding for thicker material and higher speed.• MIX DC innovative system allows

.

$3,995.00 GST Incl.

$3,47391+GST

V0095AA-SP

ITALIAN DESIGN - INDUSTRIAL RATEDSQUARE WAVE AC - MIX ARC DIGITAL SYNERGIC SYSTEM


MIG - PULSE MIG - TWIN PULSE MIG DC TIG - DC PULSE TIGAluminium Fabrication Package

MULTIFUNCTION PULSE MIG 250A

• 250 Amp 230V • Simple Operation • Synergic Double Pulse • High Speed Mig/Mag• DC Tig Synergic & Manual• MMA Synergic & Manual • Push Pull Gun Ready• Trolley with Drawer• 20-250 Amps • Weight 60Kg

Tig Torch is Optional and Extra

$6,295.00 GST Incl.

$5,47391+GST

C/w XA260 MIG Torch, Arc Set & Regulator

V0066AA-K

MULTIWAVE 200A TIG AC/DC

INDUSTRIAL GRUNT!

Caliper143.indd 1 16/02/15 10:21:02 a.m.

14 Caliper 143 p1-3 1.pdf 1 23/02/15 5:00 PM

WELDINg

14

WELDINGWELDING

C/w 4m Mig Torch, Arc Set & Gauged Flow RegulatorTig Torch is Optional and Extra

MIG250MTS

250AMP, 230VOLT 1 PHASELIFT ARC DC TIGDIGITAL METERS SPOOLGUN CONNECTION

XA-MIG250MTS-SP

$1,895.00 GST Incl.

$1,64783+GST

• Power Supply 230v - 1Ph • Duty Cycle @ 25°c 60% @ 250A• Current Range MIG 30 - 250A• Current Range MMA 10 - 250A• Rated Power 12 KVA• Dimensions (LxWxH) 900x400x670 • Weight 60kg


RAZOR MIG205MTSMIG • TIG • MMAGREAT NEW MODELNew 40KHZ Inverter TechnologyProviding superior arc characteristics.Now with Lift Arc DC Tig function. • Power Supply 230v - 1Ph • Multifunction MIG-TIG-MMA • Duty Cycle @ 25°c 60% @ 200A• Current Range MIG 30 - 200A• Current Range TIG 30 - 200A• Current Range MMA 10 - 200A• Rated Power 9.4 KVA• Weight 18Kg• Digital Meters• MMA Arc Force Control• Approved to AS/NZ 60974-1

Tig Torch is Optional and Extra XA-MIG205RZMTS-SP$1,849.00 GST Incl.

$1,60783+GST

C/w 4m Mig Torch, Arc Set & Gauged Flow Regulator

165 AMP MIG/MMA WELDERSPOOL GUN READY

Power Supply 230v - 1Ph Duty Cycle @ 25°c 50% @ 165ACurrent Range MIG 30 - 165ACurrent Range MMA 10- 165ARated Power 7.1 KVADimensions (mm) 470x190x380 Weight 17kg

C/w Mig Torch Arc Set & Regulator

• MIG Gas/Gasless • Burn Back Control • Wire Inch• Spool Gun Ready• Hot Start Electrode

$945.00 GST Incl.

$82174+GST

XA-MIG165RZ-SP


Razorweld

BULK BUY FACTORY PRICE DEAL!

RAZOR MIG165

XA-MIG250D-SP

$2,250.00 GST Incl.

$1,95652+GST

• Mig - Gas & Gasless Wire Function • Spool Gun Ready• Electronic Inductance• Digital Control • 2T/4T Trigger Function • Lift Arc DC TIG • Down Slope & Post Gas• MMA Arc Force Control• Approved to AS/NZ 60974-1Power Supply 230v - 1Ph Multifunction MIG-TIG-MMA Duty Cycle @ 25°c 60% @ 250ACurrent Range MIG 30 - 250ACurrent Range TIG 10 - 250ACurrent Range MMA 10 - 250ARated Power 12.2 KVAWeight 35Kg

XA-MIG250D DIGITAL CONTROL!

MIG • TIG • MMA

250 Amp Air Cooled Mig with Digital Remote Pad. Provides real time adjustment of wire feed speed & voltage from the torch during welding.

DM26 DIGITAL MIG TORCH x 4m Complete with

XA-MIG210D-SP

$1,834.00 GST Incl.

$1,59478+GST

• Mig - Gas & Gasless Wire Function • Spool Gun Ready• Electronic Inductance• Digital Control • 2T/4T Trigger Function • Lift Arc DC TIG • Down Slope & Post Gas• MMA Arc Force Control• Approved to AS/NZ 60974-1Power Supply 230v - 1Ph Multifunction MIG-TIG-MMA Duty Cycle @ 25°c 45% @ 200ACurrent Range MIG 30 - 210ACurrent Range TIG 10 - 160ACurrent Range MMA 10 - 160ARated Power 8.4 KVAWeight 19Kg

XA-MIG210D DIGITAL CONTROL!

MIG • TIG • MMA

220 Amp Air Cooled Mig with Digital Remote Pad. Provides real time adjustment of wire feed speed & voltage from the torch during welding.

DM24 DIGITAL MIG TORCH x 4m Complete with

MIG • TIG • MMAPRICE SMASH DEAL!


OPTIONAL TIG TORCH KIT DEALXA17V SUREGRIP TIG TORCH x 4m - 16-25 CONNECTOR+ TIG SPARES PARTS KIT

$119.00 GST Incl.$10348

+GST

XATK4

XA17V SUREGRIP TIG TORCH x 4m - 35-50 CONNECTOR+ TIG SPARES PARTS KIT XATK3

TO SUIT MACHINES WITHOUT GAS SOLENOID

ARGON FLOWMETER REGULATOR

$185.00 GST Incl.$16087

+GST

XCEL- GAS

Xcel-Gas regulators are independently tested and are compliant to AS4267 including pre ignitionoxygen test.

XG-ARLFM32

MACHINE &GEAR CARRY

BAG

Caliper143.indd 2 16/02/15 10:21:06 a.m.

15 Caliper 143 p1-3 2.pdf 1 6/03/15 12:12 PM

WELDINg

15

WELDINGWELDING

NEW CUTTING EDGE PLASMA

• 45 Amp @ 35% Duty Cycle - 230V• PFC - Power Factor Correction• Pilot Arc Low Frequency Start• Quick Release Central Connector• 4T Function for Automatic use • Pre-set Air with Auto Drain• Weighs only 5.2Kg • Approved AS/NZ 60974-1 Standard

5UltraHz Inverter Technology

$1,440.00 GST Incl.

$1,25217+GSTC/w SC80 Plasma Torch, Earth Lead,

Spare Parts Kit XA-CUT45RZ-SP

MIG - PULSE MIG - TWIN PULSE MIG - DC TIG - DC PULSE TIGWater Cooled High Productivity Welding SolutionAluminium Fabrication Package with Push Pull Torch

MULTIFUNCTION PULSE MIG 400A

• 400 Amp 415V 3 Phase • Simple Operation • Synergic Double Pulse • High Speed Mig/Mag• DC Tig Synergic & Manual• MMA Synergic & Manual • Push Pull Gun Installed• Trolley with Water Cooler• 20-400 Amps • Weight 60Kg

V0034AA-SP

$11,495.00 GST Incl.

$9,99565+GST

Complete with amazing new water cooled push pull torch x 8m

Duty Cycle @ 25°c 65% @ 350AmpsCurrent Range MIG 30A -350 AmpsCurrent Range MMA 10A -350 AmpsWire Feeder Type Gear Driven 4 Roll

Industrial 350Amp Power Source 10m Long Interconnecting Cables Control Settings at the Wire Feeder4 Drive Roll Separate Wire FeederDigital MetersCrater Current Setting2/4T Trigger FunctionTrolley with Accessory Drawer

C/w Mig Torch, Earth & Arc Lead, RegulatorTig Torch is Optional and Extra

$4,399.00 GST Incl.

$3,82522+GST

WARRANTY

MIG350SWF MULTI FUNCTIONSeparate Wire Feeder

XA-MIG350SWF-SP

CLEAN CUT 15mm Steel SEVER CUT 20mm Steel

RAZORCUT45

• Industrial 3 Phase 415V• Euro Connection Torch• HF Start• 20mm Maximum Cut• European Plasma Torch• Portable - 21kg

$2,280.00 GST Incl.

$1,98261+GST

XA-CUT55-SP

C/w - Plasma Torch, Spares Kit Earth Lead, Air Regulator

XA-CUT55 PLASMA CUTTERHIGH PERFORMANCE INVERTER

MASSIVE CUT PRICE DEAL!

Heavy Duty SUREGRIP 150A Plasma Torch with Spares


• Industrial 3 Phase 415V• Euro Connection Torch• HF Start• 30mm Maximum Cut• European Plasma Torch• Portable - 30kg

$3,400.00 GST Incl.

$2,95652+GST

XA-CUT105-SP

C/w - Plasma Torch, Spares Kit Earth Lead, Air Regulator

XA-CUT105 PLASMA CUTTERHIGH PERFORMANCE INVERTER

PRICE CUT SPECIAL!

Heavy Duty SUREGRIP 150A Plasma Torch with Spares


NEW IMPROVED MODEL

Power Supply/Phases (V-Ph) 240 - 1Input Frequency (Hz) 50Cutting Speed (mm/min) 150-800Cutting Range (mm) 3-300Motor Speed (r.p.m) 1500Reduction Gear Single ConeDirection Bi-directionalWheel distance apart (mm) 160Dimensions (mm) 350x140x175

STRAIGHT LINE TRACK CUTTERA stepless variable speed carriage with oxy/fuel gas cutting torch mounted on a straight line track. Built to industrial standards provides high quality oxy/fuel cuts on steel plates and structures where straight line accuracy is paramount. With addition of the CG30 Circle Cutting Attachment the CG30 will cut circles with a high degree of accuracy.

$1,375.00 GST Incl.

$1,19565+GST

XG-CG30-SP

TRACKER GAS CUTTER

REGULATORSET

Caliper143.indd 3 16/02/15 10:21:10 a.m.

16 Caliper 143 p1-3 3.pdf 1 6/03/15 12:13 PM

WELDINg

16

WELDINGWELDING

• Hi-ViZ Orange Body • Reflective Taped• Select Cowhide Leather Sleeves• Flame Retardant Cotton Sateen Body • Leather Spatter Guards • Dieletric Insulated Domes• KEVLAR Thread Stitching • Roll Up Collar with Hook & Loop• FR Cotton Lined Collar• Sizes XL XXL XXXL

Mode l Size +GST Inclusive

AP-2730 XL XL $114.78 $132.00

AP-2730 XXL XXL $120.00 $138.00

AP-2730 XXXL XXXL $129.57 $149.00

$11.50 GST Incl.

$1000

$1,375.00 GST Incl.+GST

Manufactured & Compliant to AS/NZ4267 Standard

1 x Heavy Duty Tool Box 1 x 10 Metre Twin Line Hose Set1 x Oxygen Regulator1 x Acetylene or LPG Regulator 1 x Blow Pipe Handle1 x Cutting Attachment 3 x Cutting Nozzles 1 x Mixer & 3 x Weld / Braze Tips 1 x Heating Tip Acetylene Only1 x Oxygen Flash Back Arrestor 1 x Fuel Gas Flash Back Arrestor1 x Combination Spanner1 x Radius Bar and Pivot1 x Roller Guide & Tip Cleaner Set 1 x Welding / Cutting Goggles

OXYGEN ACETYLENE & LPG CUTTING, WELDING, BRAZING& HEATING GAS SETS

XG-GSK-A1 (ACETYLENE) - XG-GSK-LPG1 (LPG) $560.00 GST Incl.

$48696 EA+GST

XG-PH01-8A

Pilot Light with Flame Adjustment Valve

$132.00 GST Incl.

$114 78+GST

XCEL- GAS

REGULATOR FLASH BACK ARRESTORS INCLUDEDWITH NO COMPROMISE ON SAFETY OVER PRICE

XCEL- GAS

PH01 AIR/PROPANE (LPG)HEATING TORCH KIT

Hi ViZ WELDING JACKET

PAIR OFRIGGERS WORK

GLOVES

NEW! PRODUCT

• Flame Retardant Cotton Sateen Body• Select Cowhide Leather Sleeves• Light Weight • Great manoeuvrability• Leather Spatter Guards • Dieletric Insulated Domes• KEVLAR Thread Stitching • Roll Up Collar with Hook & Loop• FR Cotton Lined Collar• Sizes XL XXL XXXL

Mode l Size +GST Inclusive

AP-2530 XL XL $86.09 $99.00

AP-2530 XXL XXL $91.30 $105.00

AP-2530 XXXL XXXL $98.26 $113.00

STEEL BLUE WELDING JACKET

Viewing Field 100mm x 67mmReaction Time 0.04m/secShade: Variable 7-13Sensitivity AdjustableDelay Control Yes Auto On/Off YesPower Supply 2 x 3v (CR2032)Sensors 4Total Weight 530g Standards ANSI Z87.1 Optical Class EN379 .1/1/1/2

HIGH DEFINITION OPTICSBIG 100mm x 67mm View Area TIG / MIG/MAG / ELECTRODE PLASMA & GRIND MODE

$425.00 GST Incl.

$36957+GST

ACBLK

ARC COMMANDER 6000X

• High Quality• Low Cost • 2 Independent Sensors • Solar Cell Powered• Adjustable Shade 9-13 • External Shade Select• Adjustable Sensitivity• Adjustable Delay to Clear• Magnifying Lens Holder

AUTOWELD - AS3000FG

AS3000FG $149.00 GST Incl.

$129 57+GST

WITH GRIND MODE FUNCTION

• Accurate Digital Control Function • 4 Independent Sensors • Auto On - Auto Off Power Function • Delay Control • Sensitivity Control • Magnifying Lens Holder • Grind Mode

Razorweld

High Quality, Low Cost, Solar Cell Powered4 Independent Sensors, Large View - Grind Mode

$309.00 GST Incl.

$26870+GST

RWX5000

RWX5000 DIGITALNEW! WIDE VIEW AUTO HELMET


PAIR OFRIGGERS WORK

GLOVES

NEW! PRODUCT

FLIP UP GAS GOGGLESXCEL- GAS

• Gas Welding & Brazing• Gas Cutting• Shade 5• Flip up Front • Grinding, Chipping

XG-WG

Caliper143.indd 4 16/02/15 10:27:25 a.m.

17 Caliper 143 p4-6 1.pdf 1 23/02/15 5:06 PM

WELDINg

17

WELDINGWELDING

$399.00 GST Incl.

$295.00 GST Incl.

$25652+GST

K4000 ARC AIR GOUGING TORCH Electrode Sizes: Round - 4.0mm - 12.7mm - Flat - 15.9mmAir Requirement: 80 PSI @ 25 CFM / 5.6 KG/CM² @708 L/MIN

K4000

DC GOUGING CARBONS COPPER CLADGouging Torch Not Included

CODE PRODUCT DESCRIPTION +GST Inclusive

DGC40305 DC Carbon 4.0 x 305mm x 100pcs $43.48 $50.00





• Wide Body Sizing • Palm & Thumb Reinforcement • Best Side Split Cowhide means Pliable & Durable

COMFOflex

XA-10-2016L-LH: Welding Gauntlet - Left Hand Pair

Better Welding GlovesHEAVY DUTY INDUSTRIAL WELDING GLOVES

$26.00 GST Incl.

$22 61 EA

XA-10-1003-L Tig Gloves - LXA-10-1003-XL Tig Gloves - XL

TIG WELDING GLOVESSewn with Kevlar thread for better protection against seam burnout. Especially developed and produced for the professional Tig operator. “ Reversed Grain Pigskin” guarantees a snug

An excellent choice of glove for Tig Welding

$19.00 GST Incl.

$1652+GST

LEFT HAND PAIRS AVAILABLE

XA-10-2016-L Welding Gauntlet - LargeXA-10-2016-XL Welding Gauntlet - XLarge

PORTABLE ELECTRODE OVEN

Rejuvenate those old damp electrodes, don’t throw them away. BAKE them back to goodness in an XcelArc portable 230v single phase electrode oven.

BRING LIFE TO THOSE DAMP ELECTRODESKEEP THOSE ELECTRODES MOISTURE FREE

$310.00 GST Incl.

$26957+GST

DH-10

DH-10 10Kg CapacityStainless Steel Liner 700W - 230V 50°C -300°C

$165.00 GST Incl.

$14348+GST

DH-5

DH-5 5Kg Capacity 238W- 230V 50°C -200°C

NEW MODELS FANTASTIC QUALITY

Pipe Welding, Military, Remote & Mobile Welding, Ideal for Hard Hat situations. Available in Blue, Silver & Bronze

AUTOMATIC WELDING GOGGLES

Technical DataReaction Time 0.05msSensors 2 x IndependentShade: 5-7-9-11-13Sensitivity AdjustableDelay Control AdjustablePower Supply Battery, Solar CellsOperating Temp -10°C to 55°CStandards ANSI Z87.1 / DINWarranty 12 months

$389.00 GST Incl.

$33826+GST

WLBLU

• Arc Welding • Mig Welding • Tig Welding • Plasma Cutting • Gas Welding

WELDING SCREEN FRAME LAVAshield welding screens meet

NZ OSHA standards. Screens are transparent and resistant to UV rays,

grommets placed at 270mm intervals.Size: 1.8m x 1.8m

XA-55-8166 XA-55-6466$99.00 GST Incl.

$86 09

$115.00 GST Incl.

$100 00

• Suits1.8m x 1.8m Screens • 5 Minute Assembly • High Quality Steel• Easy Assembly • Click Together Corners• Castor Wheels Included

NOW WITH CASTOR WHEELS

WELDING CURTAIN

XCEL-ARC SUREGRIP ERGO MIG TORCHES

Model Size +GST Inclusive

XA15-4 XA Suregrip Mig Torch 150A x 4m $147.83 $170.00




High Quality Superior Comfort Mig Welding TorchesFront End Parts Compatible with BINZEL Style Torches

EURO CONNECTION

Caliper143.indd 5 16/02/15 10:27:28 a.m.

18 Caliper 143 p4-6 2.pdf 1 23/02/15 5:08 PM

WELDINg

18

WELDINGWELDING

$399.00 GST Incl.

Precision Level Layer Wound • Triple De-oxidised • X-Ray Quality Smooth Feeding • Clean Weld Finish • International Approvals

PRECISION LEVEL LAYER WOUND E-70S-6 -TRIPLE DE-OXID ISEDNo.8 SOLID MIG WELDING WIRE

$29.00 GST Incl.

$25 22

XAN80805 0.8mm x 5.0kg XAN80905 0.9mm x 5.0kg

$52.00 GST Incl.

$45 22


$50.00 GST Incl.

$43 48


$40.00 GST Incl.

$3478

XAN80605 0.6mm x 5.0kg

No.8WIRE

No.8WIRE

GENERAL PURPOSE ELECTRODES• All Positions • Welds Galvanised Steel • Excellent Finish • Site Welding • Smooth Arc • Self Lifting Slag • Great Price

CODE PRODUCT DESCRIPTION +GST Inclusive

XAGP25 XAGP Electrode 2.5mm x 2.5kg Pkt $20.43 $23.50

XAGP32-25 XAGP Electrode 3.2mm x 2.5kg Pkt $19.57 $22.50



Part No. Type 10pc Pkt +GST Inclusive

WT20-16-175 Thoria ted 1.6mm $16.96 $19.50

WT20-24-175 Thoria ted 2.4mm $ 36.52 $42.00

WZ8-24-175 Zirconia ted 2.4mm $ 36.52 $42.00

WZ8-32-175 Zirconia ted 3.2mm $ 73.91 $85.00

TUNGSTEN ELECTRODESSUPERIOR ELEMENT MIX SUPER FINE GRAIN STRUCTURE SEAMLESS EXTRUSION GROUND POLISHED FINISH

$33.50 GST Incl.

$29 131.6mm x 1kg Tube 2.4mm x 1kg Tube

$32.90 GST Incl.

$2861

XA316L-R1-16 XA316L-R1-24

1KGTUBE

Part No. Size x 5Kg +GST Inclusive

XA316LSI-10T 1.0mm $137.39 $158.00

XA316LSI-16T 1.6mm $ 105.22 $121.00

XA316LSI-20T 2.0mm $ 113.04 $130.00

XA316LSI-24T 2.4mm $ 113.04 $130.00

STAINLESS STEEL TIG WIRE 316LSiID STAMPED BOTH ENDS - INTERNATIONAL APPROVALS

EARTH CLAMP 500A

$16.00 GST Incl.

$13 91

EC500T$23.00 GST Incl.

$20 00EHUK400

ELECTRODEHOLDER 400A

$32.00 GST Incl.

$27 83ECMAG50

MAGNETIC EARTH CLAMPHEAVY DUTY 500A

MAGNETIC ROTARY EARTH CLAMPS

$19.00 GST Incl.

$1652ECM30R

$40.00 GST Incl.

$34 78ECM60R

$23.00 GST Incl.

$20 00ECM50R

300 AMP 500 AMP 600 AMP

STAINLESS STEEL TIG WIRE 316LSi

5KG

Part No. Type 10pc Pkt +GST Inclusive

E3-16-175 E3 1.6mm $18.26 $21.00

E3-24-175 E3 2.4mm $ 40.00 $46.00

E3-32-175 E3 3.2mm $64.35 $74.00

Superior to 2% Thoriated tungsten in electrode life and arc stability. E3 is made from a combination of 3 oxides and is not radioactive.E3 runs cooler than other types of tungsten electrode and provides fast, consistent arc starts. For both AC and DC welding applications.

• More stable tip & arc geometry • Runs cooler • Extended life • Non radioactive replacement for Thoriated tungstens • Oxides 1.5% Lanthanum, .08% Zirconium, .08% Yttrium• AWS A5.12M/A5.12:2009

NEW! E3 TUNGSTEN ELECTRODE

GASLESS MIG WIRE

$110.00 GST Incl.

$95 65

XA-E71TGS08450.8mm x 4.54kg Spool

XA-E71TGS09450.9mm x 4.54kg Spool

$105.00 GST Incl.

$9130

FLUX CORED GASLESS W IRE GREAT FOR OUTDOOR USE

SMOOTH STABLE ARC

XA-E71T1112451.2mm x 4.54kg Spool

$99.00 GST Incl.

$86 09

Caliper143.indd 6 16/02/15 10:27:31 a.m.

19 Caliper 143 p4-6 3.pdf 1 6/03/15 12:15 PM

WELDINg

19

SPANNERS / WRENcHES

20

ball enD hex key sets 9pC130-2009 Metric. Size range:1.5 - 10mm. 130-2109 Imperial Size range: 1/16” - 3/8”. Guaranteed Forever.

hex bit set 15pCKT1015MQHexagon Head. 36 & 80mm long. 4-12mm.Bit Holder.

rinG & O/e spanner set - metriCKT1226MRNManufactured from chrome vanadium, thin wall thickness on ring, thin profile on open end. Manufactured to German TUV standard. Sizes: 6 - 32mm. Comes with new “Industrial Quality” nylon pouch.

tOrqUe WrenChesTorque wrenches manufactured to ISO6789. With ratchet the torque wrench can be used for both tightening, and final checking of the torque. Reversible with lever, but only for right-hand action for torque checking. Lockable setting. Accuracy ±4%.

flexi lOCkinG Gear metriC spanner set 7pCWRT1531

Sizes 8 - 17mm. Built to exceed ANSI specifications. Box end offers 72 teeth gear and Z-Drive to contact the flat

wall of fasteners for a stronger grip. Chamfered open end for easy access. Works with just 5 degree swing.

hex key set - l WrenCh - 2pkT22199Protanium steel hex keys. Proguard finish delivers superior corrosion protection. Includes - T12137 13pc Hex Set Imperial & T12199 9pc Hex Set Metric.

rinG & O/e spanner set 7pC Thin wall thickness on ring. Thin profile on open end. KT1207MR Metric: 10 - 19mmKT1207SR Imperial: 3/8” - 3/4”

1/2” Dr. tOrx bit sOCket set 9pCKT4109PR-10Sizes: T20, T25, T27, T30, T40, T45, T50, T55 & T60

1/2” Dr. metriC hex bit sOCket set - 9pC KT4110PR-10Sizes: 3, 4, 5, 6, 7, 8, 10, 12 & 14mm

1/2” Dr. tOrqUe WrenChKT34423-1C10-150 ft/lb (13.6-203.4 Nm).Distinct torque scale. 24 teeth.DIN ISO 6789 & ASME B107.14M-2004.

1/2” Dr.tOrqUe WrenChKT34423-2C30-250 ft/lb (40.7-339 Nm).Distinct torque scale. 24 teeth.DIN ISO 6789 & ASME B107.14M-2004.

pOWer barsPlain handle grip. Extra torque for those stubborn nuts & bolts.

Code Description +GST Inclusive CFBC1215 3/8” Dr. x 15” Long $34.70 $39.90CFBC1624 1/2” Dr. x 24” Long $53.04 $61.00CFBC1630 1/2” Dr. x 30” Long $55.57 $63.90

$29.90 GST Incl.

$2600

$39.50 GST Incl.

$34 35 $14.90 GST Incl.

$1296 EA

$42.90 GST Incl.

$37 30 EA $56.90 GST Incl.

$49 48 EA

$169.90 GST Incl.

$147 74

$331.00 GST Incl.

$287 83

$135.30 GST Incl.

$117 65

$187.10 GST Incl.

$162 70

24pc Ratcheting Screwdriver Set

3/8”Drive 36pc Socket Set

3/8”Drive Torque Wrench

3/8”Drive Torque Wrench

Code Description +GST Inclusive 1492AG-E 277mm Long. 1/4” Dr. 5-25Nm (4-18 ft/lb) $73.91 $85.003892AG-E3 368mm Long. 3/8” Dr. 19-110Nm (14-81ft/lb) $94.78 $109.001292AG-EP 465mm Long. 1/2” Dr. 40-210Nm (30-160ft/lb) $103.48 $119.001292AG-E4 632mm Long. 1/2” Dr. 70-350Nm (50-250 ft/lbs) $155.65 $179.003492AG-E 850mm Long. 3/4” Dr. 90-450Nm (60-300ft/lb) $234.78 $270.003492AG-E1 1065mm Long. 3/4” Dr. 140-700 Nm (100-500 fl/lb) $651.30 $749.00


SOcKET SETS

21

1/4” Dr COmbinatiOn sOCket set 49pCKT2549CR01Contains: Extension bar, flexible handle, universal Joint, 3/8” adaptor, offset extension bar. 6pt Standard Sockets - Metric: 4 - 13mm, Imperial: 5/32 - 1/2”. 6pt Deep Sockets - Metric: 4 - 13mm, Imperial: 5/32 - 1/2”.

3/8” Dr COmbinatiOn sOCket set 36pCKT3036CR01-K16 x Metric sockets 6 - 22mm. 14 x Imperial sockets 1/4 - 7/8”. Reversible ratchet, 75mm extension bar, 150mm extension bar, sliding T handles, universal joint and flexible handle.

1/2” Dr sOCket set COmbinatiOn 43pCGCAD43036pt. 8 - 32mm Satin Chrome finish. 6pt. 3/8” - 1-1/4” Chrome finish. Unique Satin Chrome / Mirror Chrome finish for quick identification. 2 x Spark plug sockets 16 & 21mm. Metal carry case. Toptul’s unique satinchrome finish on accessories.

1/2” Dr impaCt sOCket set 18pCGCAD180710 - 32mm.

1/4” Dr sOCket set metriC 39pCKT2539MRContains: 6pt 1/4” Dr. Std Sockets: 4-13mm. Torx Bits: T8-T40. Hex Bits: 3-10. Star Sockets: E4-E8. Ratchet, sliding t-handle, universal joint, extension bars. Driving handle.

comBination socket sets

1/4” Dr metriC & imperial sOCket set 23pC 527-7123Contains ratchet, universal handle, spinner handle, flexible handle, 2” & 6” extensions. Socket sizes are 4 - 12mm, 3/16” - 7/16”. Sockets made from chrome vanadium. Contoured ratchet handle for comfort and added torque. 1/2” Dr COmbinatiOn sOCket set 44pC

KBT27681/2” Dr. (12pt Std) Sockets 10 - 36mm, 1/2 - 1 1/8”. Drive Accessories: 1/2” Dr. Gear to Gear Ratchet (48T), spark plug sockets, extensions, power bar, sliding t bar, universal joint.

3/4” Dr COmbinatiOn sOCket set 27pC KB3103Sockets: (12pt Std) 22mm - 50mm, 7/8” - 2”. Accessories: ratchet, extensions, sliding t bar.

3/4” Dr sOCket set metriC 16pCKT6016MR

Contains: 12 Point Standard Sockets 21- 50mm. 500mm x 3/4 Dr. Reversible Ratchet.

200mm x 3/4 Dr. Extension Bar. 400mm x 3/4 Dr. Extension Bar.

500mm x 3/4 Dr. Sliding T-Handle. Material - Chrome Vanadium alloy steel.

Finishing: Polished, chrome plated & black phosphate sunk.

$99.90 GST Incl.

$86 87

$59.00 GST Incl.

$51 30

$199.00 GST Incl.

$173 04

$199.00 GST Incl.

$17304

$239.00 GST Incl.

$207 83

$286.00 GST Incl.

$24870

$129.00 GST Incl.

$112 17

$159.00 GST Incl.

$138 26

$359.80 GST Incl.

$312 87

$99.90 GST Incl.

$8687

$189.00 GST Incl.

$164 35 1/4” Dr.26pc Socket Set

Metric

8m x 25mmTape Measure

1/2” Dr metriC & imperial sOCket set 42pC 527-8442 Contains ratchet, universal joint, 2.1/2”, 5” & 10” extensions, flex handle, speed handle, 3 way adapter, 5/8” & 13/16” spark plug sockets. Socket sizes are 10 - 32mm, 3/8” - 1.1/4”. Sockets made from chrome vanadium steel. Contoured ratchet handle for comfort and added torque.

3/8” Dr metriC & imperial sOCket set 33pC 527-8333Contains ratchet, universal joint, flexible handle, 3” & 6” extensions, 5/8” & 13/16” spark plug sockets. Socket sizes are 6 - 22mm, 1/4 - 7/8”. Sockets made from chrome vanadium steel. Contoured ratchet handle for comfort and added torque.

Guaranteed Forever!



TOOL KITS / TOOL BAgS / AUTOmOTIVE

22

prOfessiOnal tOOl Chest & tOOl kit 248pCCCT004F

9 Drawer Tool Chest, Racing Series 8pc Punch and Chisel Tray 38pc Gearless Ratchet Driver and Bits Tray 94pc Socket, Driver & Accessory Tray 16pc Plier and Adjustable Wrench Tray

17pc Screwdriver Tray 46pc Ring and Open End Spanner Tray 9pc Reversible Gear Spanner Tray 19pc Combination Ball End Hex Key Tray

tOOl set 62pCKT902-062MRCantilever toolbox.6pt Std 1/2”Dr. sockets: 10 - 32mm with accessories Ring & Open End Spanners: 6 - 24mm. 9pc Extra long ball point hex keys: 1.5 - 10mm. 3 Phillips & 3 Slotted heavy duty screwdrivers. 3pc Pliers - combination, long nose & groove joint.

1/2” Dr metriC tOOl set 79pCKBT2957Sockets: 1/2” Dr. 10mm - 36mm. Drive accessories 1/2” Dr. ratchet, spark plug socket, extension, power bar. Additional hand tools: screwdrivers, ring and open end spanners, bit driver & assorted bits. Linesman, long nose, diagonal, groove joint & locking plier, adjustable wrench, metric ball end hex keys, 16oz ball pein hammer.

2 tOn alUminiUm axle stanDsBH3AOZ2000Light weight and very strong. Certified to Aus/NZ standards.

starter tOOl set 119pCKT911-STARTER

Includes 6 drawer ball bearing slide tool chest.

3/8 & 1/2” Dr. sockets 6 - 32mm & 3/8 - 1”

and accessories, screwdrivers, pliers, ball point

keys & Ring O/E spanners6 - 21mm & 5/16 - 3/4”.

tOOl Chest & tOOl set 99pC

GCAZ00383 draw tool chest with lift up lid

and foam inserts for tools. 1/4” Drive Socket Set 4-13mm.

1/2” Drive Socket Set 10-32mm. Combination ring spanners 8 - 19mm.

Screwdrivers, linesmen, diagonal, longnose & waterpump pliers.

Hex & torq keys.Engineers hammers.

rUbber base tOOl baCk paCk 368mmTIR-22419-RDouble wall constructed, moulded rubber protective base for maximum durability. Neoprene top carrying handle and breathable, padded back and shoulder straps for carrying comfort.

tOOl stOraGe baCk paCk 356mmTIR-5000Multiple exterior pockets and twelve interior pockets for tools and fasteners. Top carrying handle and breathable, padded back and shoulder straps for carrying comfort.

1/4” & 1/2” sOCket / spanner set 41pCS410Good range of 1/4 & 1/2” drive sockets together with a full set of ring and open end spanners.

Exclusive to TradeZone

2 tOn alUminiUm JaCkBH1AOZ2000Low entry full aluminium body, double piston pump. 2 tons certified to AUS/NZ standards.

$574.00 GST Incl.

$49913

$999.00 GST Incl.

$868 70

$179.00 GST Incl.

$155 65

$129.00 GST Incl.

$112 17

$599.00 GST Incl.

$520 87

$149.00 GST Incl.

$129 57

$569.00 GST Incl.

$49478

$369.00 GST Incl.

$320 87

$1,499.00 GST Incl.

$1,303 48

superHOTPRIcEsuper

HOTPRIcE

3/8” Dr.39pc Socket Set

Metric

16pc MetricRing O&E Spanner

Set

$65.00 GST Incl.

$56 52


AUTOmOTIVE / mATERIAL HANDLINg

23

bOOster 12V - 760CaBB12-760AUZTo start diesel engines up to 250HP as start assistance and 125HP without battery. Instant response: 760CA. Peak current: 2250A.25 mm2 copper area in cables ensures high conductivity. Internal fuse 300A. Electronic fuse check system. Automatic electronic charger with 3 colour LED indicator. 12V output with 16A internal fuse to run smaller devices.

75mm CastOrsNylon Wheel. Stainless Steel. 80kg Capacity. Food Grade.

bOOster 12/24V - 1520/760CaBB1224-760AUZTo start diesel engines up to 500HP as start assistance and 250HP without battery at 24V. Instant response: at 12V 1520CA at 24V 760CA. Peak current: at 12V 4500A at 24V 2250A.35mm2 copper area in cables ensures high conductivity. Internal fuse 500A. Electronic fuse check system. Automatic electronic charger with 3 colour LED indicator. 12V output with 16A internal fuse to run smaller devices.

ratChet tie DOWnsLightweight aluminium ratchet tie downs designed to withstand the toughest outdoor conditions!

Code Description +GST Inclusive AU138 Padded 2 metre - 2pk $20.78 $23.90AU140 Padded Heavy Duty 3metre - 2pk $26.00 $29.90AU145 Padded 4 metre - 4pk $31.22 $35.90AU153 3 metre - 4pk $19.57 $22.50AU345 3.5 metre - 4pk $44.78 $51.50AU364 3 metre - 2pk $25.39 $29.20AU938 4 metre - 2pk $23.91 $27.50

WelDinG CartTQ6020Ideal for Arc/Mig Welders and Gas Bottle. Top Tray – 450(L) x 280(W)mm. Middle Tray – 380(L) x 280(W)mm. Bottom Tray – 695(L) x 290(W)mm. (Flat Packed, Assembly Required)

bOOster 12/24V 1200/2400CaBB1224-1200AUZTo start diesel engines up to 480HP without battery at 12V and up to an impressive 1500HP diesel engines without battery at 24V. Immediately powerful: at 12V: 2.400CA, at 24V: 1.200CA Peak current: at 12V: 6.200A, at 24V: 3.100A. Quick voltage selector. 50mm 2 copper area in cables ensures high conductivity. Internal fuse 500A. Electronic fuse check system. Cable length: 1.85m. Automatic electronic charger with 3 colour LED indicator. 10h charge time. Cigar lighter charger [cable of 1.85m] is available as option: BBSNL4FX001. 12V output with 16 A internal fuse to run smaller devices.

100mm CastOrsNylon Wheel. 125kg Capacity.

bOOster 24V - 1520CaB24-1200AUZTo start diesel engines up to an impressive 1,500HP without battery at 24V. Electronic fuse check system. Cable length: 1.85m. Automatic electronic charger with 3 colour LED indicator. 4h charging time. 24V output with 16A internal fuse to run smaller devices.

hyDraUliC DrUm liftTQ6036Easily transport 115l (30gal) or 208l (55gal) steel, plastic or fibre drums. Capacity: 500kg. Built in seal remover. Removable handle is used to tilt drumfor position on dolly. Net Weight: 17kg

WelDinG CartTQ6030Ideal for Arc/Mig Welders and Gas Bottle. Top Tray – 500(L) x 320(W)mm. Bottom Tray – 660(L) x 320(W)mm. Flat Packed, Assembly Required.

$819.00 GST Incl.

$71217

$225.00 GST Incl.

$19565

$169.00 GST Incl.

$146 96

$139.00 GST Incl.

$120 87

$1,620.00 GST Incl.

$1,408 70

$1,325.40 GST Incl.

$1,152 52

$1,399.00 GST Incl.

$1,216 52

FRee Bahco branded bar table with 2 stoolswith the purchase of any Bahco Booster

castoRs

$19.30 GST Incl.

$16 78

$40.70 GST Incl.

$35 39

$11.70 GST Incl.

$10 17

$48.80 GST Incl.

$42 43

$10.70 GST Incl.

$9 30

$23.40 GST Incl.

$20 35

R4407 Rigid Castor

S4406 Swivel Castor

S4406B Swivel Castor (Braked)

R338975mm Rigid Castor

S3388B75mm Swivel Castor

S338875mm Swivel Castor (Braked)

BB12-760AUZ

BB1224-1200AUZ

BB1224-760AUZ

B24-1200AUZ

gREATDEAL

gREATVALUE

500kg capacity

POWER TOOLS - BOScH

24

GWs 9-115 - anGle GrinDer 115m - 900W0601790042Powerful 900-watt motor for fast work progress. High work efficiency due to long lifetime and carbon brush lifetime. Direct cooling for high overload capability. Gear head can be rotated in 90°steps. Anti-rotation protective guard provides reliable protection.

GWs 11-125 anGle GrinDer 125mm - 1100W0601792042Powerful 1100-watt motor for fast work progress. High work efficiency due to long lifetime and carbon brush lifetime. Ergonomic shape for maximum control in various grip positions. Direct cooling for high overload capability. Gear head can be rotated in 90°steps.

GGs28lCe - straiGht GrinDer - 650W0601221140Compact, ergonomic shape for versatile grinding work. Powerful 650 W motor with soft start for fast work progress. KickBack Stop: detects when the tool is jammed and shuts it down immediately.Constant Electronic for constant speed even under a heavy load. Double sealed ball bearing for less vibration sensitivity when accessories are unbalanced .

Gsb 18Ve-2 li 18V li-iOn DestrOyer impaCt Drill 4.0ah bUnDleD With GWs18-125V-li anGle GrinDer0615990GA2Extremely powerful: 85Nm for the toughest screw driving and drilling applications in wood and metal & impact drilling in masonary up to 14mm. Extremely compact: very short head length (only 213 mm) for perfect handling. New! Rotation Control System (ERC) detects sudden jamming and shuts the tool down. 4 Pole Motor. Electronic Motor Protection (EMP). 13mm all metal Auto-Lock chuck for greater durability. Bosch Electronic Cell Protection (ECP). Integrated LED light. Inlcudes L-BOXX 136 Carry Case.

specifications: 18V Li-Ion. 2 x 4.0Ah batteries. 40 min charger. Maximum torque 85Nm. 13mm Chuck. 25 + 1 torque settings.

Gsb 16 re klC - impaCt Drill - 710W0601218141Compact design for perfect handling. Sturdy metal gear housing for long lifetime. Single-sleeve quick-change chuck with Auto-Lock for quick tool changes with one hand. Rotating brush plate for constant power in reverse and forward rotation. New safety handle with innovative fixing for a secure hold on the machine.

GCO 2400 J CUt Off saW 2400W bUnDleD With GWs 7-125 anGle GrinDer0601B18040Powerful 2400W input motor with high overload capacity and strong armature for the toughest applications. Soft start prevents current inrush and provides smooth start. Adjustable spark guard effectively deflect spark when cutting materials in various shapes.

GWs 1400 C - anGle GrinDer 125mm - 1400W0601824241Distortion-resistant protective guard - quickly and easily adjustable, provides reliable protection. Constant Electronic for constant speed, also under heavy load. Gear head can be rotated in 90° steps.

GWs 24-230 lV, anGle GrinDer 230mm - 2400W0601893G40Powerful 2400 W Champion motor and rotating bow handle. Lowest weight in its class. Vibration reduced by up to 50% thanks to Vibration Control main handle and auxiliary handle for low-fatigue working. Distortion-resistant protective guard - quickly and easily adjustable, provides reliable protection.

Gsa-1300 pCe - sabre saW - 1300W060164E240For low-fatigue working: Anti vibration handle and mass balance. 1300W high-performance motor with Constant Electronic for the toughest applications. Pendulum stroke for fast sawing progress. SDS saw blade changing system for fast and convenient blade changes with one hand. Constant LEDlight for illuminating dark work areas.

Gsb 19 - 2 re - impaCt Drill - 850W060117B640Versatility for high torque or high speed applications. 2 gear, 850W of pure power, high torque: 36/15.5 Nm. High durability due to metal gear housing, ball grommet, double fan motor and stacked construction. Mechanical Overload clutch; Anti rotation system increases safety while working. Innovative auxiliary side handle due to new axial security.

$179.00 GST Incl.

$155 65 $269.00 GST Incl.

$233 91

$357.90 GST Incl.

$31122

$799.00 GST Incl.

$694 78

$467.20 GST Incl.

$40626

$329.20 GST Incl.

$286 26

$569.00 GST Incl.

$494 78

$395.00 GST Incl.

$343 48

$222.80 GST Incl.

$19374

$329.00 GST Incl.

$286 09

POWER TOOLS - HITAcHI

25

anGle GrinDer 125mm - 730WG13SR3The industry standard in 125mm. Heat resistant, high powered (730W) motor. Strong alloy gearbox. Spindle lock. Ergonomically angled side handle. Supplied in carry case.

nibblerCN16SA1.6mm Nibbler, Powerful 400W unit, Downward cutting for high visibility and clean work.

18V premiUm sOUnD system With blUe tOOthUR18DSDLTough new robust design - heavy duty shock absorbing roll frame and integrated storage case for smartphone/music device. Heavy Duty IPx4 waterproof rating. High quality sound output and easy to use Digital Tuner 0 supports Digital Audio Broadcasting (DAB). Bluetooth connection to music devices. Heavy Duty rubber antenna. Includes AC adaptor

anGle GrinDer 230mm - 2200WG23SW2Lightweight & compact new body design for general purpose grind, High-performance 2200W motor, High overload durability due to new heat resistant motors, New labyrinth air vent design provides more protection for motor from grit and dirt contamination, Low profile gearbox access into tight areas, Soft grip trigger handle, Supplied without grinding wheel.

staCkable system CasesCode Description +GST Inclusive 402544 System Case #1. 295L x 395W x 101H (mm) $33.91 $39.00402545 System Case #2. 295L x 395W x 158H (mm) $42.61 $49.00402546 System Case #3. 295L x 395W x 210H (mm) $51.30 $59.00402547 System Case #4. 295L x 395W x 315H (mm) $60.00 $69.00

355mm/14” metal CUt Off saWCC14SFDouble insulated, quick release vice 2000W.

impaCt Drill 20mmDV20VB220mm Impact Drill, 2-speed, variable speed, reverse, heavy duty, 13mm keyless chuck, carry case.

800W heaVy DUty Drill 13mmD13VGHigh Torque Drill, variable speed, reverse, heavy duty, triple reduction gearbox 0–600rpm, carry case. (optional angle attachment).

$109.00 GST Incl.

$9478

$399.00 GST Incl.

$34696

$559.50 GST Incl.

$486 52

$379.00 GST Incl.

$329 57

$439.00 GST Incl.

$381 74

$299.00 GST Incl.

$260 00

$399.00 GST Incl.

$34696

BRANDNEW

MODEL

BRANDNEW

MODEL

HitachiStacking System

Case #1

HitachiAngle Grinder

HitachiWorksite Fan

18V/AC

BEST DEAL

HitachiDiamond Blade

HitachiSafety Specs

POWER TOOLS - mAKITA

26

anGle GrinDer 100mm - 1400WGA4040CSuper Joint System II developed for effective vibration absorption. Re-designed durable gear housing. Ergonomically best possible barrel grip. Variable speed.

1/2” impaCt WrenChTW0200380W motor with an impressive 200Nm of torque to handle nuts or bolts up to M16. Tool less detachable belt clip for easy storage or temporary resting between fixing.

anGle GrinDer 115mm - 840W9557NBHigh performance 840 watt motor with enough power to handle all the jobs required of a small angle grinder. Dust proof bearings, zigzag varnish and resin coatings on motor improve durability. Gear housing can be rotated to suit most cutting and grinding applications. Small circumference barrel grip for easy handling.

18V brUshless GrinDer 5 inChDGA504ZHigh performance Brushless DC motor. Anti-restart function. Sort start & Soft braking system. Battery protection circuit. Battery fuel gauge.

10.8V impaCt DriVer & raDiO COmbODK1203Includes; TD090DWE Impact Driver, Lightweight impact driver using Li-ion technology, featuring high operational efficiency .Compact design with soft grip handle. Variable speed via trigger control. LED job light with afterglow function MR051 Radio, Quick manual tuning by turning station selection dial. Earphone jack for private listening. Dual front speakers for stereo sound. AUX-IN jack allows for connection to personal audio players. Push-button operated AM/FM digital tuner.

18V li-iOn brUshless DriVer DrillBDF459RFEHigher power and productivity with Brushless motor.Ergonomic design for fatigue free use.All metal gear construction.16 torque settings.

Die GrinDer - 400WGD0600Ergonomically designed slim body for grinding in tight spots. Internal labyrinth construction seals motor and bearings from contamination. Aluminium housing. Paddle type on/off switch.

10.8V impaCt WrenChTW100DZ3/8” square drive. Variable speed via trigger. Electric brake for precise control. LED job light. Reversible. Ergonomically designed handle with soft grip.

benCh GrinDer 150mmGB602Steady tool maintenance from this light, yet stable performer. Cosmetic new design. 2 bulbs ease your grinding jobs.

$239.00 GST Incl.

$207 83

$133.70 GST Incl.

$116 26

$243.00 GST Incl.

$211 30

$184.00 GST Incl.

$160 00

$487.50 GST Incl.

$423 91

$312.00 GST Incl.

$271 30

$214.50 GST Incl.

$186 52

$529.00 GST Incl.

$460 00 MakitaSocket Set

9pc

$109.50 GST Incl.

$95 22

gREAT VALUE

1400WATT

18VLITHIUm-ION

Am/fmTUNER

POWER TOOLS - mETABO

27

18V COrDless Drill & GrinDer kitSB18 LTX BL/W18Kit includes: SB18LTX BL 18v cordless brushless drill, W18LTX 18v angle grinder, 2 x 5.2Ah Li-ion batteries.AC30 charger & carry bag.

enGineers Drill 13mm keyeD ChUCk - 750WBE751Die cast aluminium gear housing. Maximum performance even in anti-clockwise rotation due to rotating carbon brush bridge.

anGle GrinDer 125mm - 1250WWP12-125QWith paddle switch. Long service life for demanding applications; powerful and robust angle grinder with highest power density in its class for quick work progress.

anGle GrinDer 125mm - 1250WW12-125QLong service life for demanding applications; powerful and robust angle grinder with highest power density in its class for quick work progress.

anGle GrinDer 230mm - 2400WW24-230MVTMetabo Marathon motor with patented dust protection for long service life. Deadman switch for high user protection. Tool-free adjustable guard; twist-proof mounting. Metabo VibraTech (MVT):integrated damping system and side handle to reduce vibrations in order to protect the user’s health.

flat heaD anGle GrinDer 125mm - 910WWEF9-125Extremely flat gear head permits working at sharp angles up to 43°. Compact design for quick removal of welding slag, rust or paint in tight places e.g. frame constructions.

anGle GrinDer 125mm - 850WW85125Slim motor housing for optimum handling. Die cast aluminium gear housing for strength and heat dissipation.

anGle GrinDer 125mm - 1550WWEV15-125QHighest service life for extreme applications: robust, powerful angle grinder with speed control and greatest power density in its class for quick work progress.

anGle GrinDer 125mm - 1700WWEA17-125QMaximum productivity: first 1700 W angle grinder with the power of a large grinder and the compactness of a small one for quickest material removal for industrial applications.

Die GrinDer - 710WGE 710 PlusThe multi-talented one; with extended grinding spindle (mounted on double ball bearing in solid steel tube); ideal for grinding and sharpening in difficult to reach places. Idle revolution: 10.000 - 30.500 /min. Collet 6 mm, Protective rubber cap, 1 open-jawed spanner.

tUbe belt sanDer - 1200WRBE12-180SetPowerful tube belt sander with double reduced gear for processing even larger stainless steel pipes.

$1,029.00 GST Incl.

$894 78

$499.00 GST Incl.

$43391

$139.00 GST Incl.

$120 87

$399.00 GST Incl.

$346 96

$529.00 GST Incl.

$460 00

$469.00 GST Incl.

$407 83

$399.00 GST Incl.

$346 96

$475.00 GST Incl.

$413 04

$429.00 GST Incl.

$373 04

$449.00 GST Incl.

$390 43 $1,875.00 GST Incl.

$1,630 43

BESTBUY

TRAILER PARTS & KITS

1 x Pair Hubs & Stubs

1 x Jockey Wheel

1 x Hydraulic Disc Brake Set 4 x Wheel & Tyre Assy 1 x Pair Tandem Mudguards

1 x LED Lighting Kit 1 x 7.5m Bundy Roll 2 x U-Bolt Kits 2 x Amber Marker Lamp

CODE DESCRIPTION +GST INCLUSIVE TEKT2000: 2000kg Non Braked $???.?? $???.??TEKT2000HB: 2000kg Hydraulic Disc Braked $???.?? $???.??TEKT2500HB: 2500kg Hydraulic Disc Braked $???.?? $???.??TEKT2500HB/14: 2500kg Hydraulic Disc Braked $???.?? $???.??TEKT2000EB: 2000kg Electric Braked $???.?? $???.??TEKT2500EB: 2500kg Electric Braked $???.?? $???.??

CODE DESCRIPTION +GST INCLUSIVE TEKS750: 750kg Non Braked $???.?? $???.??TEKS1250: 1250kg Non Braked $???.?? $???.??TEKS1000: 1000kg Non Braked $???.?? $???.??TEKS1500: 1500kg Non Braked $???.?? $???.??TEKS1750: 1750kg Non Braked $???.?? $???.??All kits are subject to availability at time of order.

1 x 1 7/8” Hydraulic Coupling 2 x 2000kg Rated Safety Chain

ORDER YOUR

TRAILERKIT NOW

1 x Equaliser Spring Set

1 x Brake Hose Kit

PLEASE CHECK ALL DETAILS CAREFULLY AND ADVISE ANY CHANGES IN A RETURN EMAIL OR PHONE CALL. CHECK FOR SPELLING ERRORS, INCORRECT INFORMATION AND ANY OTHER CHANGES REQUIRED. COLOUR PROOFS ARE APPROXIMATE COLOUR ONLY, COLOUR MAY DIFFER ON THE FINAL PRINTED COPY. SAMPLES ARE PROVIDED FOR DEMONSTRATION PURPOSES AND REMAIN THE EXCLUSIVE PROPERTY OF CRISPIN DESIGN UNTIL CONTRACTUALLY AGREED UPON. ALL RIGHTS RESERVED. DUPLICATION STRICTLY PROHIBITED.

03 308 2353 / 027 337 5384 / [email protected] / www.crispindesign.co.nz

CALIPER/TRADEZONE full page (190x264.6) 29/01/15CM TRAILER PARTS

CM Trailer Parts full page (190x264.6) PROOF.pdf 1 18/02/15 3:06 PM

28

sinGle axle trailer kit Code Description +GST Inclusive TEKS750 750kg, Non Braked $619.57 $712.50TEKS1000 1000kg, Non Braked $633.91 $729.00TEKS1250 1250kg, Non Braked $642.61 $739.00TEKS1500 1500kg, Non Braked $709.48 $815.90TEKS1750 1750kg, Non Braked $773.83 $889.90

tanDem axle trailer kit Code Description +GST Inclusive TEKT2000 2000kg, Non Braked $1,346.96 $1,549.00TEKT2000EB 2000kg, Electric Braked $1,799.13 $2,069.00TEKT2000HB 2000kg, Hydraulic Disc Braked $1,799.13 $2,069.00TEKT2500EB 2500kg, Electric Braked $1,886.96 $2,170.00TEKT2500HB 2500kg, Hydraulic Disc Braked $1,891.30 $2,175.00TEKT2500HB-14 2500kg, Hydraulic Disc Braked $2,000.00 $2,300.00

SINgLE & TANDEm AxLE TRAILER KITSBuild your Own Trailer?

Order your trailer kit now!

all kits are subject to availability

at time of order.

LUBRIcATION EqUIPmENT

29

el series triGGer aCtiOn Grease GUn - 450GmG10010N

Develops grease pressures of up to 4,000psi (276bar).500g capacity when using bulk grease. Three way loading.

Robust die cut aluminium head assembly. Unique follower cup design makes the gun suitable for use with both 450g cartridges

and bulk grease – without needing to change the orientation of the follower cup. Includes a 300mm long

grease gun flex and heavy duty four jaw coupler.

air OperateD Grease GUn - 450Gm680ANPressure ratio of 40:1. Suits 450g cartridge or bulk grease. Recommended maximum air pressure of 98psi. Flexible extension length: 50cm.

Clear barrelleD Grease GUn - 400Gm200ACBLever Action. Develops grease pressures up to 12,000psi. Delivery rates of up to 1.6g of grease per stroke. 500g capacity when using bulk grease. Handles up to NLGI2 grease. Three way loading. 16.5mm rigid extension.

flexible Grease GUn hOsesIndustrial quality, genuinely high pressure, high flexibility grease gun flex. Minimum burst pressure of 14,500psi. Made in Germany for repetitious, high volume, high pressure greasing applications. 1/8 BSP (m) threads fit all brands of grease guns.

Code Description +GST Inclusive 14551 300mm Flexible Grease Gun Hose $12.35 $14.2014552 450mm Flexible Grease Gun Hose $16.43 $18.9014553 700mm Flexible Grease Gun Hose $26.00 $29.90

premiUm leVer aCtiOn Grease GUn - 450GmARG2555Develops up to 12,000psi. Thick piston for greater volume.Coarse thread to stop cross threading.

leVer aCtiOn DrUm pUmp - 205lARP3370Suits 205L and 60L drums. 250cc per stroke. Suitable for diesel, oil, kerosene, coolant and ATF. Can also be used for other light to medium viscosity lubricants. Quality mechanism. Dual bung threads for both drum types.

el series leVer aCtiOn Grease GUn - 450GmG10020NDevelops grease pressures of up to 8,000psi. Three way loading. Unique follower cup design makes the gun suitable for use with both 450g cartridges and bulk grease – without needing to change the orientation of the follower cup. Includes a 150mm long grease rigid extension and heavy duty four jaw coupler.

COrDless Grease GUn - 450Gm670AN314 volt cordless grease gun. Generates grease pressures up to 10,000psi. One hour fast charger, spare battery cartridge holder, long grease gun flex, heavy duty coupler and plastic molded carry case supplied standard. Can be used to dispense grease from eight 450 gram cartridges before changing over or recharging of the battery is required.

Clear barrelleD Grease GUn - 400Gm220ACBTrigger Action. Develops grease pressures up to 8,500psi. 1.1g delivery per stroke on the high volume setting. 0.70g delivery per stroke on the high pressure setting. 500g capacity when using bulk grease. Handles up to NLGI2 grease.

beka sinGle pOint lUbriCatOrBEKAONE-120-1-24

The first refillable, reusable, disposable, sealed for life, electro mechanical single point lubricator. Refillable with the grease of your choice.

720gm (6 x 120gm) total capacity before replacement – battery life is 6 refills or 24 months. No grease cartridges/bladders or batteries required,

eliminating consumable costs. Discharge rates adjustable from 1, 3, 6, 12 months. Capacity 120gm.

premiUm triGGer aCtiOn Grease GUn - 450Gm

ARG2666Develops up to 12,000psi. Suitable for use with

450gram cartridges or bulk grease. Can be loaded with a filler pump. Includes 300mm flexible extension to get

into those difficult to reach places. Pressure/volume setting

rOtary DrUm pUmp - 205lARP3250Suits 205L and fits 60L drums. Up to 25LPM. Suitable for petrol, diesel, kerosene and light oils. 1.2m of 25mm polypropylene discharge hose, without nozzle. Can syphon and transfer fuels in reverse.

$37.90 GST Incl.

$32 96

$78.10 GST Incl.

$67 91

$79.50 GST Incl.

$69 13 $99.00 GST Incl.

$86 09 $85.30 GST Incl.

$74 17

$28.90 GST Incl.

$25 13

$326.80 GST Incl.

$284 17

$191.90 GST Incl.

$166 87

$229.90 GST Incl.

$199 91 $237.90 GST Incl.

$206 87

$1,299.00 GST Incl.

$1,129 57

Arlube300mm Flexible

Extension

Arlube450mm Flexible

Extension

Arlube4 Litre Funnel

Arlube4 Litre Funnel

WORKSHOP EqUIPmENTextraCtiOn fan - 300mmPortable. 500 watts. 65 m3/min.

Code Description +GST InclusiveCTF30 300mm $173.04 $199.00

heaVy DUty exhaUst DUCtinG - flexibleCode Description +GST InclusiveCTF9305 300mm Dia. x 5m long $70.78 $81.40CTF9310 300mm Dia. x 10m long $138.70 $159.50

extraCtiOn fan - 500mmMounted on castors. Angle of fan can be adjusted.130m3/min. 1100 Watts.

Code Description +GST InclusiveCTF50H 500mm $390.43 $449.00

heaVy DUty exhaUst DUCtinG - flexibleCode Description +GST InclusiveCTF9505 500mm Dia. x 5m long $121.30 $139.50CTF9510 500mm Dia. x 10m long $242.61 $279.00

explOsiOn prOOf extraCtiOn fan - 300mmPortable. 500 watts. 65 m3/min.

Code Description +GST InclusiveBTF30 300mm $381.74 $439.00

explOsiOn prOOf DUCtinG - flexible Heavy duty exhaust ducting. Flexible.

Code Description +GST InclusiveBTF9305 300mm Dia x 5m long $121.57 $139.80

30

s series air hOse reelsThe new S Series of plastic hose reels from Alemlube are made of high quality impact resistant and UV stabilised polypropylene and a positive latching mechanism that automatically locks hose at the desired length.

Oil sUCtiOn GUnARG3620500CC.Quality no leak piston/cylinder design.Suitable for emptying and filling engines, gear boxes and differentials.Industrial quality.

WOrkshOp 7.5hp - 3 phase COmpressOrWS7.5For slightly larger workshops where two or more tools are being run simultaneously. Powdercoated receiver. Pump displacement 830L/min, 29.3cfm. Free air delivery 630L/min, 22.2cfm. Made in Italy.

s series Oxy-aCetylene hOse reelSO60015 metre x 6mm I.D. rubber hose. The SO600 oxy acetylene hose reel from Alemlube is a genuine industrial quality welding reel. Featuring impact resistant UV stabilised covers for maximum durability and an automatic and positive latching mechanism.

WOrkshOp 5.5hp - 3 phase COmpressOrWS5.5A convenient size for small joinery and automotive workshops. Able to run a small air tool and spraygun simultaneously. Powdercoated receiver. Pump displacement 650L/min, 23.0cfm. Free air delivery 515L/min, 18.2cfmm.

spitfire COmpressOrSPITFIRE1250Belt drive. 50 litre air receiver. 3 HP motor. Cast iron cylinder. Steel Valves. Pressure switch control. Electric motor overload protection. 335lpm /11.8cfm displacement.240 lpm free air delivery. 1 year warranty.

WOrkshOp 10hp - 3 phase COmpressOrWS10.0Ideal for automotive and engineering workshops and larger factories. Able to run three air tools simultaneously.Pump displacement 1080L/min, 38.1cfm.Free air delivery 710L/min, 25.1cfm.Made in Italy.

$35.60 GST Incl.

$30 96

$897.00 GST Incl.

$780 00

$429.90 GST Incl.

$373 83

$358.50 GST Incl.

$311 74 $332.90 GST Incl.

$289 48

$3,590.00 GST Incl.

$3,121 74

$2,690.00 GST Incl.

$2,33913

$2,150.90 GST Incl.

$1,870 35

ArlubeMini Oil Suction

Gun

SA300N 8m x 10mm I.D. hose

SA400N 15m x 12mm I.D. hose

mObile sCaffOlDinG platfOrmIYMINIMAX“The MINIMAX Base Kit is an affordable, versatile and lightweight scaffolding unit that is quick and easy to assemble. As its name suggests, it’s perfect for use on smaller exterior jobs and is ideal for interior work such as painting and signage. Base kit max working height 2.6m. Versatile 260mm stepped height platform. Snap click fittings for ease of assembly. Locking castors to hold the tower in place. Safe working load of 200kg.

alUminiUm DUal pUrpOse laDDer 2.1m - 3.8mTRDDP7 120kg Industrial Rated. Durable lightweight design uses structural grade high tensile aluminium to provide greater strength. All aluminium components have been anodised for better corrosion resistance and lower retention of grime and dirt. Diagonal locking designed spreader bar to allow for single handed deployment of ladder. Anti slip moulded rubber feet for safety.

$1,656.00 GST Incl.

$1,440 00

$243.70 GST Incl.

$211 91

12 mOnTh warranTy

12 mOnTh warranTy

12 mOnTh warranTy

WORKSHOP EqUIPmENT

31

air hammer Chisel kitW5402-2K5 chisels.10mm shank x 190mm long. QC retainer. Universal spring. Ideal for rust removal. Carry case. Individual replacement parts available.

7000W, 3 phase eleCtriC start GeneratOrGT7000/3

7.0kW (max.) 6.5kW (cont.). Electric start (battery incl.) and recoil. Digital hourmeter. Ergonomic handles and heavy

duty solid wheel kit with rubber tyres for portability.2 x 15A 230V + 1 x 400V three phase outlet. 25L fuel

tank for up to 8 hours continuous operation. Ideal for workshops and dairy sheds where 3 phase power is needed.

12 month commercial warranty.

neeDle sCaler straiGht typeW5435S19 x 3mm needles. Lever throttle speed control. Ideal for rust & paint removal.

GDx 18 V-eC, 18V li-iOn brUshless impaCt DriVer / WrenCh0615990G85Long runtime due to EC Brushless motor. Patented dual bit holder with 1/4” & 1/2” drive. 3 pre set torque modes for greater control. Ergonomic slim grip design for fatigue free work. 18V Li-Ion. 2 x 4.0Ah batteries. 40 min charger. Maximum torque 185Nm. Screw diameter M6 - M16.

Gas tOrCh kitGAST-TS4000T2K

peDestal banD rOllerTQ7108Designed for hot-rolled or mild steel. Can roll circles 8” in diameter and larger. Can roll material as heavy as 3/8” x 2” or 1/2 x 1”. Band roller / Ring Roller is ideal for rolling steel band and other slim parts into reel. Easy to assemble and operate. Floor mount, 6 pin position follow dies. Knurled upper die, flange bearings for upper die. With hydraulic bottle jack, long handle for easy turning.

neeDle sCaler pistOl typeW543519 x 3mm needles. Lever throttle speed control. Ideal for rust & paint removal.

GhG 660 lCD heat GUn06019447374 main applications can be stored permanently, so that airflow and temperature are at the correct setting instantly. Airflow and temperature control in steps of ten for precise working; data is shown on an LCD display. Cold setting: heating element cools down within approx. 1 minute. Infinitely variable temperature control. 2300W. 50 - 660 deg celcius. Airflow 250 - 500 L / min. Cold air setting 50 deg celcius.

GDs 18 e, impaCt WrenCh - 500W0601444040High impact performance with low weight. V-groove impact mechanism with low recoil torque and long lifetime. Forward/reverse rotation for tightening and loosening. Torsion bars (special accessory) guarantee adherence to desired torque. Easy-to-change tools.

Gas tOrCh kit - triGGer startGAST-WK2301

shrinker & stretCherTQ7110Works up to 18 gauge mild steel. Works up to 16 gauge Aluminum includes heavy cast iron frame. Easy to operate, ideal for making perfect fit rust repair patches around wheel opening, door jams, windshields and truck gutters. Net Weight: 17kg.

$57.90 GST Incl.

$50 35

$129.50 GST Incl.

$112 61

$259.00 GST Incl.

$22522

$271.10 GST Incl.

$23574 $619.00 GST Incl.

$538 26

$819.00 GST Incl.

$712 17

$399.00 GST Incl.

$346 96

$599.00 GST Incl.

$520 87

$149.00 GST Incl.

$129 57

$237.00 GST Incl.

$206 09

gREATVALUE

gREATVALUE

$2,475.00 GST Incl.

$2,152 17

Map-ProCylinder

1750psi hiGh pressUre Waterblaster KDH7/120 1680psi - 7L/min working pressure. 10m steel wire high pressure heavyduty hose. Heavy duty spray gun with safety cut-out. Stainless steel variojet lance. Continuously adjustable pressure control. Brass pump head. 10 Amp plug. Ceramic coated pump pistons. 24 Month Guarantee.

$857.90 GST Incl.

$746 00

WORKSHOP EqUIPmENT

We are a fair-minded company and try to exceed the requirements of all ‘Fair Trading’ legislation. Prices are current for the period denoted on the cover. Stocks are not always available in all stores all the time but we will try our best to obtain more or equivalent substitutes. Errors and omissions are rare but can happen, so we apologize and try to take all reasonable measures to fix the issue for you.

If you can’t get to us, phone, fax or email and we will send it to you

benCh GrinDers

benCh GrinDer 250mmBG250H1100watts. 2850rpm.Cast iron body for steady running.Safety lock switch. Spindle for polishing mop included.

abrasiVe CUt Off saW 355mmACS3562200W motor. Can cut round 100mm diameter, square 100 x 100mm, rectangle 130 x 105mm. Comes with 355mm abrasive disc and 8mm hex key. Weighs just 21.8kg. Fast bypass material clamp.

Drill press - benCh mOUntDP390B 16mm chuck with MT2 x B16 spindle taper. Swing 390mm, 750watt powerful induction motor. No-volt-release switch prevents automatic starting when power is restored.

CUt Off saW 400mmCS16 Single phase 2.2kw. No load speed 2600rpm Takes wheel 405 x 3 x 25.4mm Cutting capacity round bar 100mm, box section 100 x 100 x 10mm, flat 100 x 6mm. Weighs 90kg.

Drill press - flOOr mOUntDP430F430mm swing. 850w powerful motor. No volt-release switch prevents automatic starting when power is restored. 28mm capacity drilling in steel. 16mm chuck. Coolant table. 16 speed.

$859.00 GST Incl.

$746 96 $789.00 GST Incl.

$686 09 $575.00 GST Incl.

$500 00

$289.00 GST Incl.

$251 30

$299.00 GST Incl.

$260 00

$199.00 GST Incl.

$173 04

BG203 200mm. 550 watt. Wheel size: 200 x 25 x 16mm.

$99.00 GST Incl.

$8609

BG151 150mm. 250 watt. Wheel size: 150 x 20 x12.7mm

SCAN QR CODE TO SUBSCRIBE

Documents

TradeZone Caliper Apr-May 2015