FIRE RATINGTRADE SHEET

FIRERATED

drillcut.com.au

STACKDesigned for installation in the concrete slab for stack work only for plumbing stacks or where waste traps are situated above the floor level. Certified for all socket fittings.

CAST IN FIRE COLLARS

The Complete Fire Rating Support Package

Surface mounted fire collar for plastic pipework for retro-fit applications.

RETROFIT FIRE COLLARSRETROFIT

FLOOR WASTEDesigned for installation in the concrete slab for stack work only for plumbing stacks or where waste traps are situated above the floor level. Certified for all socket fittings.

SHELLA plastic casing without fire prevention material used for concrete floor penetrations only without fire-rating requirements. LOW COLLAR

Available sizes 50mm, 80mm, 65-100mm.

COMBAT COLLARAvailable sizes 50mm, 80mm, 65-100mm.

JUMBOTo suit sizes 250mm,315mm.

EXTENSION TOPClicks into standard collars for thicker slabs.

Drillcut provides a unique package specifically matched to your daily fire ratingrequirements including all collars, firestop and sealants.

With our range of fully certified fire stop products, plus full technical backup you can havepiece of mind on every job done.

Standard Floor Waste Jumbo Velpex Gas Unicollar

Stack Floor Waste

Floor Waste Low Collar

Shell

Extension top

Combat Collar

Jumbo

FIRE RATED INSULATION

FIRE WRAPS & BANDS

FIRE RATED BATT

Maxilite™ Fire Rated Board

MAXILITE™ FIRE RATED BOARD

FyreSafe™ fire rated batts are a lightweight,coated mineral fibre batt designed for use as a fire seal for service penetrations. Consisting of high density fibrous lamella core, sealed on both sides with a flexible fire rated coating, FyreSafe Batts o�er high fire protection, along with e�ective smoke and acoustic seal. Suitable for complex penetrations, they can be cut to fit around various size service penetrations and sealed with fire seal.

Easy to fit with an adhesive tab, and are una�ected by mois-ture, humidity or frost but care should be taken so as to avoid damaging the outer polythene sleeve. (To be used in conjuntion with a metal band sleeve for hollow walls)

FyreWrap® is a foil-faced, fire protection wrap/blanket designed to provide fire rating to ducts, kitchen exhausts, smoke spill systems, penetration seals, structural steel elements. Also provides insulation against metallic penetra-tions of plasterboard, concrete & masonry walls & floors. For use on services including steel, copper and brass pipes, pipe with combustible insulation, cables with & without cable trays.

PUDDLE FLANGE-IN-A-BOXDrillcut’s Puddle Flange is an all in one fire collar and recessed puddle flange that can be installed in seconds. Stocked to suit 160mm or 180mm slab heights, it is a huge time saver, eliminating the messy cut, prime, glue processes, and reducing the need for unnecessary lengths of PVC piping on site. The fire collar is the market leading Snap collar.

Fire Wrap Wall Collar Band

Fyrewrap® Insulation Fire Damper Packing

MAXILITE™ is a lightweight, high performance fire rated board. Due to the lightweight construction of the board, MAXILITE™ is easy to handle and work with, ensuring quick on-site installa-tion, whilst retaining suitable fire performance. MAXILITE™ is suitable for applications such as bulkeads, protection of structural steel, service penetrations where fire protection and fire stopping is required.

drillcut.com.au

Puddle Flange-In-A-Box

Fire Rated Batt

FYREBOX®

FIRE PILLOWSUp to 4 hour fire resistance. Available in 3 standard sizes.Easy to install and re-locate. Removable for re-use.For wall, floor and ceiling penetrations. Dust proof - safefor the work environment. Protects cable trays and ducts.

Fyrebox® is an intumescent type product designed to preventthe spread of fire through service penetrations Fyrebox® issuitable for use in any building where penetrations are madethrough walls, floors and ceilings for services such as electrical,data and communication cables, cable trays, metal pipes,insulated copper pipes and plastic conduits.

FIRE DAMPER GRILLES

Fire Pillow4 Hr Fire Rated

Fire RatedAccess Panel

FIRE RATED ACCESS PANELSFire Rated Access Panels have been designed for use whereconvenient access is required for the maintenance of serviceswithin fire rated walls and ceilings. Access panels are typicallyinstalled during construction, but they can be retro-fitted whenadditional access is required.

Intumescent fire damper grills allow the bi-directional move-ment of air through tire rated walls and floors.When a fire occurs, the slats in the grill intumescent expands rapid to form a solid fire barrier. Installation is quickand easy and they are easily identified. Intumescent grills have foil slats covered intumescent material encased in a rigid steel frame.

IntumescentFire DamperFyrebox®

ACCESSORIES

FIRE RATINGTRADE SHEET

Stainless Steel Cable Ties Fire Rated Wedge Anchors Hex Screw Bolts

FIRE RATED SEALANTS

FIRE RATED GROUT

Fire Rated Grout

This fire-rated silcone o�ers superior qualities combined with excellent movement accommodation, temperature stability, UV resistance and ageing characteristics. It o�ers excellent resistance to fire to a rating of up to 4 hours.

FIREBAN POLYURETHANE

INTU COMPOUNDIntumescent Sealant meeting fire rating requirements for service penetrations.

FIRE RATED FOAMSelf expanding, ready to use polyurethane foam with propel-lants, which are completely harmless to the ozone layer.Has a fire rating of up to 4 hours.

Cartridge

Sausage

FIRE RATINGTRADE SHEET

INTU Compound Fire Rated Foam

Fireban Polyurethane - Up to 4 hours fire rated sealant.

Pail

15 Corporate PlaceBroadmeadowsVIC 3047

Drillcut - MelbourneUnit 5 Rachael CloseSlough Business ParkSilverwater, NSW 2128

Drillcut - Sydney 3/34 Innocent StreetKings MeadowsTAS 7249

Drillcut - Launceston 55 Sunderland StreetDerwent ParkTAS 7009

Drillcut - Hobart

sales@drillcut.com.au 1800 DRILLCUT (374 552)drillcut.com.au