Updated 20/03/2012

Tractor - PLM Portfolio Contents Page:

1. DGPS Manual Guidance (EZ-Guide 250, FM-750 and FM-1000): - Manual Guidance Guides the operator down the swath using a Map Display and LED’s. With these systems the operator still steers the tractor down the swath. A comprehensive range of Manual Guidance Products is detailed here. This section includes information, part numbers for EZ-Guide 250, FM-750 and the FM-1000 as well as how the upgrade process works for OmniSTAR and RTK. Information, part numbers for the parts and accessories are also detailed here. 2. DGPS Assisted Guidance (EZ-Steer and EZ-Pilot System): - Assisted Guidance actually steers the tractor down the swath once the operator has manually placed the tractor on the line. The system includes a terrain compensator to eliminate “Roll Error” for when the tractor is leaning on side slopes and “Yaw Error” for when the tractor is crabbing across the field. Gyroscopes provide this correction. The EZ-Steer Product is detailed within this section, along with part numbers. This System can be fitted to either of the above Manual Guidance Light bars in order to actually steer the tractor down the swath. The EZ-Pilot Product is detailed within this section, along with part numbers. This System can be fitted to either FM-750 or FM-1000 Light bars in order to actually steer the tractor down the swath 3. A) DGPS Integrated Guidance – NH IntelliSteer (Factory Fit and Retro Fit): - Integrated Guidance in the world of New Holland is labelled as “IntelliSteer”. This can be both factory or retro fitted. This section explains order processes for Sidewinder II - T6000 Range/Power Command, all T7000/T7 tractors as well as T8000/T8 and T9000/T9. Please follow these simple steps, whilst working with the appropriate tractor section of this pricelist. 3. B) DGPS Integrated Guidance – Trimble Autopilot (Retro Fit Kits): - Today we are unable to Factory Fit Integrated Guidance to T6000 tractors without Sidewinder II. For these tractors we Can Fit a Trimble Autopilot kit. This is still Hydraulic control of the steering, whilst utilising a Trimble Screen within the cab, but is fitted at the dealer end. Please examine this section for information, part numbers for this process. We are also able to fit these kits to older NH tractors. Older TG Tractors can be fitted with autopilot, where IntelliSteer cannot be installed. Older T7000 Tractors with mechanical remote valves where IntelliSteer cannot be retro fitted (Before July 2009 build) will take Trimble Autopilot, TM Tractors, as well as competitive machines – namely JD, MF, Cat, Fendt can take Trimble Autopilot. 4. Correction Signals – EGNOS, OmniSTAR, VRS RTK and RTK: - When using GPS technology for guidance, we label the technology as “DGPS”. The “D refers to the “Differential” Correction or level of accuracy. This section explains the 3 levels that you are able to sell: EGNOS, OmniSTAR, VRS RTK and RTK. 5. NH Operators Manuals: - A Selection of Operators Manuals for Replacement and Retro Fit Kits.

For support (After reading the below) Please Contact Your PLM Top Gun or NH Area Sales Manager:

Website : www.newholland.com/plm

(Please Register on the website for Up-to-Date Information)

Updated 20/03/2012

1. DGPS Manual Guidance (EZ-Guide 250, EZ-Guide 500, FM-750/1000)

Manual Guidance EZ-Guide 250 Features & Specifications: • 10.9cm colour display which provides bold visuals of where you are and where you have been. Coverage appears yellow, whist overlap appears grey. • 3D plan and perspective views provides the operator with a clear impression of their location in the field. • On screen wizards allow for easy setup and operation. • Receiver delivers sub meter accuracy and it can be upgraded to higher accuracy (+/- 15-20cm pass to pass accuracy). • OnPath™ advance filter technology . • Capable of working with EZ-Steer® - with additional cable 73321220

Part Number: 73321215 EZ-Guide 250 Light bar NH branded with patch antenna (with ENG operator manuals) – Sub meter Accuracy Upgrade: - More accurate signal Part Number: 73321218 - Ag 15 Antenna Upgrade kit (consists of: Ag 15 antenna; extra antenna mount plate; antenna cable). With this upgrade: +/- 15-20cm Pass to Pass accuracy using EGNOS Correction Signal Suction cup Part Number: 87301269 - Suction cup mount for Light bar – 1 Needed for EZ-Guide 250 Replacement Power Lead Part Number: 73321229 USB Stick Part Number: ZTN64268-00 - USB Flash Drive 1 GB compatible with EZ-Guide - for firmware upgrade/to export data

FM-750 Part Number: ZTN94000-60 FM-750 System, NH branded, DGPS, with Ag25 Antenna + Quick ref card, and getting started guide. Accuracy Upgrades:

ZTN81507 FM-750 Accuracy Upgrade, DGPS (EGNOS) to OmniSTAR HP/XP* ( code only)

ZTN81509 FM-750 Accuracy Upgrade, OmniSTAR HP/XP to RTK (code only) [an RTK rover radio to be added] (12.5khz Rover Radio - Part Number: ZTN78750-46)

VRA Upgrade:

ZTN81515 VRA Upgrade for LH5000, Amazone, Bogballe and Vaderstad protocals. Serial cable ZTN67091 will be needed as well as cable from implement manufacturer

Features & Specifications: • 20 cm 16:9 LCD Touch screen which provides bold visuals of where you are and where you have been. Coverage appears yellow, whist overlap appears grey. • 3D plan and perspective views provides the operator with a clear impression of their location in the field. • On screen wizards allow for easy setup and operation. • Unique OnPath™ advance filter technology providing better accuracy more of the time. • Dual external video input to connect up 2 cameras. • Capable of working with EZ-Steer®, EZ-Pilot and Trimble Autopilot™ systems.

Updated 20/03/2012

To obtain an upgrade code for FM-750 dealers need to place a regular order through CSPS of the chosen CNH Part Number. To obtain the upgrade code dealers must send an email to the address: eugpsreceiverupgrade@cnh.com including the following info: a) Serial number of the unit for which the upgrade is requested (this number can be found in a label on the Light bar itself) b) CNH Part Number of the upgrade code ordered c) CSPS order number of the PN of the upgrade code ordered d) In the following days dealers will receive via email a pass code that can be loaded to the receiver following instructions provided via the screen. USB Stick Part Number: ZTN64268-00 - USB Flash Drive 1 GB compatible with EZ-Guide - for firmware upgrade/to export data FM-1000 Part Number: ZTN933006000 FM-1000 with activated GPS1 at Egnos level, Ag15 antenna, cabling, Quick reference card and Getting started manual. Part Number: ZTN933006003 FM-1000 with Zephyr Model 2 antenna, 450 to 470MHz radio module for RTK will require accuracy upgrade ZTN69521, Quick reference card and Getting started manual. Accuracy Upgrades:

ZTN69520 FM-1000 Accuracy Upgrade, DGPS (EGNOS) to OmniSTAR HP/XP* ( code only)

ZTN69523 FM-1000 Accuracy Upgrade, OmniSTAR HP/XP to RTK (code only) [an RTK rover radio to be added] (12.5khz Rover Radio - Part Number: ZTN69795-45)

VRA Upgrade:

ZTN69540 VRA Upgrade for LH5000, Amazone, Bogballe and Vaderstad protocals. Serial cable ZTN67091 will be needed as well as cable from implement manufacturer

To obtain an upgrade code for FM-1000 dealers need to place a regular order through CSPS of the chosen CNH Part Number. To obtain the upgrade code dealers must send an email to the address: eugpsreceiverupgrade@cnh.com including the following info: a) Serial number of the unit for which the upgrade is requested (this number can be found in a label on the Light bar itself) b) CNH Part Number of the upgrade code ordered c) CSPS order number of the PN of the upgrade code ordered d) In the following days dealers will receive via email a pass code that can be loaded to the receiver following instructions provided via the screen. USB Stick Part Number: ZTN64268-00 - USB Flash Drive 1 GB compatible with EZ-Guide - for firmware upgrade/to export data

Features & Specifications: • 30,7cm touch colour screen with virtual light bar • 3D plan and perspective views provides the operator with a clear impression of their location in the field. • Integrated dual "GPS+GLONASS" receiver s for implement steering • Unique OnPath™ advance filter technology providing better accuracy more of the time. • Dual external video input to connect up 4 cameras. • Capable of working with EZ-Steer® , EZ-Pilot and Trimble Autopilot™ systems.

Updated 20/03/2012

Implement Steering:

2. DGPS Assisted Guidance (EZ-Steer & EZ-Pilot System) EZ-Steer For EZ-Guide 250/500 & FM-750/1000 1) EZ-Steer Kit: Part Number: 73313441 Includes quick reference card, reference guide and safety decals 2) Steering Motor Mounting Bracket/Platform Kit - choose a bracket specific to tractor (kits include fitting instructions and brackets)

Features & Specifications: • Consists of an electric motor that clamps on to steering column, and turns the steering wheel. • Capable to compensate for vehicle roll and yaw when working in rough or sloping terrain (T2™ technology as standard). • Requires an EZ-Guide® 500 and a bracket kit to operate. • Easy to transfer between vehicles.

Updated 20/03/2012

For other makes and models of tractors please refer to the "GPS Catalogue".

73318050 - Brackets kit - NH TVT/T7500 tractors (Also use as a UNIVERSAL Kit!)

3) Order a display - either EZ-Guide 250/500 or FM 750/1000

a) EZ Guide 250 - Part Number: 73321215 - EZ-Guide 250 Lightbar NH branded with patch antenna (with English operator manuals) Note: for EZ-Guide 250 Part Number: 73321220 - Cable needs to be added.

b) EZ-Guide 500 - Part Number: 73313425 - EZ-Guide 500 System, NH branded, DGPS, with

Ag15 Antenna + Quick ref card, and getting started guide. (English)

c) FM-750 - Part Number: ZTN94000-60 - FM-750 System, NH branded, DGPS, with Ag25 Antenna + Quick ref card, and getting started guide. (English Note: for FM-750 Part Number: ZTN67259 & ZTN75742 - Cable needs to be.

d) FM-1000 - Part Number: ZTN933006000 - FM-1000 System, NH branded, DGPS, with Ag15 Antenna + Quick ref card, and getting started guide. (English Note: for FM-1000 Part Number: ZTN67259 & ZTN75742 - Cable needs to be

4) Spares and Accessories:

a) Foot Pedal - Part Number: 73321213 EZ-Steer foot switch and accessory cable.

b) EZ-Steer Foam Wheel Replacements (Pack of 4) – Part Number: 87298101 c) EZ-Steer Motor To Controller Cable – Part Number: 73316779 d) EZ-Steer to EZ-Guide 500 Power Cable – Part Number: 73313925

Updated 20/03/2012

EZ-Pilot For FM-750 and FM-1000 1) EZ-Pilot Kit: Part Number: ZTN82000-80 Includes quick reference card, reference guide and safety decals 2) Steering Motor Platform Kit - choose a bracket specific to tractor (kits include fitting instructions and brackets)  EZ‐Pilot vehicle‐specific platform kits 

ZTN78100‐01  Kit, Steering Actuator Motor, John Deere 47XX, 8000 & 9000 SERIES ZTN78100‐02  Kit, Steering Actuator Motor, T8/Magnum ZTN78100‐03  Kit, Steering Actuator Motor, John Deere Premium Cab ZTN78100‐05  Kit, Steering Actuator Motor, John Deere Combines ZTN78100‐07  Kit, Steering Actuator Motor, CIH Puma / NH T6000‐7000 ZTN78100‐08  Kit, Steering Actuator Motor, Direct Drive, CNH Combine ZTN78100‐10  Kit, Steering Actuator Motor, Ford / New Holland / Versatile Genesis ZTN78100‐13  Kit, Steering Actuator Motor, AGCO '09 & UP ZTN78100‐14  Kit, Steering Actuator Motor, AGCO '08 & OLDER ZTN78100‐17  Kit, Steering Actuator Motor, John Deere 4X30, 4X40, 4X50, 4X55, 4X61 

3) Order a display - FM-750 or FM-1000

a) FM-750 - Part Number: ZTN94000-60 - FM-750 System, NH branded, DGPS, with Ag25

Antenna + Quick ref card, and getting started guide. (English

b) FM-1000 - Part Number: ZTN933006000 - FM-1000 System, NH branded, DGPS, with Ag15 Antenna + Quick ref card, and getting started guide. (English

Features & Specifications: • Consists of an electric motor that mounts between the steering wheel and column, and turns the steering wheel. • Capable to compensate for vehicle roll, yaw and pitch when working in rough or sloping terrain (T3™ technology as standard). • Requires an FM-750 or FM-1000 and a platform kit to operate.

Updated 20/03/2012

IntelliSteer: -

(N.B. For Integrated Guidance for std T6000 Tractors, see section 3 (B))

T6000 Range/Power Command Sidewinder II Tractors – Now Available Factory Fitted!!! (For Retro-Fitting See below) 1) Order T6000 Sidewinder II (AGR) “IntelliSteer Ready” from Pricelist – (Option 525) 2) Display - IntelliView III included with armrest. Then either: 3 a) Order “Completion Kit Parts” with the tractor from the Pricelist (Option 523). Factory fit of Navigation Controller II and NH262 (at Level 2 – OmniSTAR Ready) OR 3 b) Order Tractor IntelliSteer ready (as above) and then Order from the Parts Department:

• NH372 Receiver (Level 2 – EGNOS/OmniSTAR Ready) - Part Number - 84588274

• Navigation Controller II - Part Number: 87518983

(The latter method may also be used if the customer is wanting to use existing Navigation Controller II and NH262 Receiver e.g. from his combine – obviously omit ordering the 2 parts above in this scenario). 4) Correction Signal – EGNOS Ready, OmniSTAR (subscription required) or RTK (with extra parts required) - See Pricing and Details in Section 4. 5) Operator Manuals - See Section 5.

T6000 – IntelliSteer – Retro Fitting It is not possible to retro fit IntelliSteer to T6000. T6 IntelliSteer IntelliSteer is not available for the T6 model range, consider EZ-Pilot or AutoPilot for your steering options.

Updated 20/03/2012

T7000 – Mechanical Remotes - Now Available Factory Fitted!!! (For Retro-Fitting see end over page) 1) Order T7000 (AGR) “IntelliSteer Ready” from Pricelist – (Option 525)

2) Order display - IntelliView III From Pricelist. (Option 528) Then either: 3 a) Order “Completion Kit Parts” with the tractor from the Pricelist (Option 522). Factory fit of Navigation Controller II and NH262 (at Level 2 – OmniSTAR Ready) OR

3 b) Order Tractor IntelliSteer ready (as above) and then Order from the Parts Department:

• NH372 Receiver (Level 2 – EGNOS/OmniSTAR Ready) - Part Number – 84588274

• Navigation Controller II - Part Number: 87518983

(The latter method may also be used if the customer is wanting to use existing Navigation Controller II and NH262 Receiver e.g. from his combine – obviously omit ordering the 2 parts above in this scenario).

4) Correction Signal – EGNOS Ready, OmniSTAR (subscription required) or RTK (with extra parts required) - See Pricing and Details in Section 4.

5) Operator Manuals - See Section 5.

T7000 Auto-Command and Power Command Sidewinder II Tractors (For Retro-Fitting see over page) 1) Order T7000 AC or PC “IntelliSteer Ready” from pricelist

Option 525 – All Auto-Command Tractors as well as

Power Command Tractors Without the Exhaust Brake Option... OR

Option 526 – Power Command Sidewinder II Tractors

With the Exhaust Brake Option

2) IntelliView III Display Fitted as Standard – Touch Screen Allowing both Straight and curved line guidance.

Then either:

3 a) Order “Completion Kit Parts” with the tractor from the Pricelist (Option 522). Factory fit of Navigation Controller II and NH262 (at Level 2 – OmniSTAR Ready)

OR

3 b) Order Tractor IntelliSteer ready (as above) and then Order from the Parts Department:

• NH372 Receiver (Level 2 – EGNOS/OmniSTAR Ready) - Part Number - 84588274

• Navigation Controller II - Part Number: 87518983

(The latter method may also be used if the customer is wanting to use existing Navigation Controller II and NH262 Receiver e.g. from his combine – obviously omit ordering the 2 parts above in this scenario). 4) Correction Signal – EGNOS Ready, OmniSTAR (subscription required) or RTK (with extra parts required) - Details in Section 4.

5) Operator Manuals - See Section 5.

Updated 20/03/2012

T7000 – IntelliSteer – Retro Fitting All T7000 Electro-Remoted Tractors, All Auto-Command Tractors, and Mechanical Remoted Tractors built with code BN7XB4 (approx July 2009) onwards can be retro fitted with IntelliSteer. In order to retro fit such a kit, the following parts are required:

1) Field Install Kit for T7000 Except Auto Command (see below) – AGR/IntelliSteer Ready Kit (Includes all parts to replicate Option 525 in the wholegood pricelist) Part Number: 710070034

Field install Kit for T7000 Auto-Command Part Number: 710070064

2) If a screen is fitted, go to item (4) If no screen is fitted and no Screen Ready kit is fitted, require – Part Number: 719258014

3) The either: a) IntelliView II Monitor (Straight Line Guidance Only) – - Part Number: 87703363 b) IntelliView Plus II Monitor (Curved Guidance – Touch Screen) – - Part Number: 87668610

4) Navigation Controller II – Part Number: 87518983

5) NH372 EGNOS/OmniSTAR Ready Receiver – Part Number: 84588274 6) Correction Signal – EGNOS Ready, OmniSTAR (subscription required) or RTK (with extra parts required) - See Pricing and Details in Section 4.

7) Operator Manuals - See Section 5. T7 IntelliSteer

1) Order “Completion Kit Parts” with the tractor from the Pricelist

(Option 523 for Standard Wheel Base, Option 522 for Long Wheel Base).

Factory fit of Navigation Controller II and NH262 (at Level 2 – OmniSTAR Ready) OR

2) Order Tractor IntelliSteer ready (Option 525) and then Order from the Parts Department:

• NH372 Receiver (Level 2 – EGNOS/OmniSTAR Ready) - Part Number – 84588274

• Navigation Controller II - Part Number: 87518983

(The latter method may also be used if the customer is wanting to use existing Navigation Controller II and NH262 Receiver e.g. from his combine – obviously omit ordering the 2 parts above in this scenario).

4) Correction Signal – EGNOS Ready, OmniSTAR (subscription required) or RTK (with extra parts required) - See Pricing and Details in Section 4.

5) Operator Manuals - See Section 5.

Updated 20/03/2012

T7 Auto-Command and Power Command Sidewinder II Tractors (For Retro-Fitting see over page) 2) Order T7. AC or PC “IntelliSteer Ready” from pricelist

Option 525 – All Auto-Command Tractors as well as

Power Command Tractors Without the Exhaust Brake Option... OR Option 526 – Power Command Sidewinder II Tractors

With the Exhaust Brake Option

2) IntelliView III Display Fitted as Standard – Touch Screen Allowing both Straight and curved line guidance.

Then either:

3 a) Order “Completion Kit Parts” with the tractor from the Pricelist (Option 522). Factory fit of Navigation Controller II and NH262 (at Level 2 – OmniSTAR Ready)

OR

3 b) Order Tractor IntelliSteer ready (as above) and then Order from the Parts Department:

• NH372 Receiver (Level 2 – EGNOS/OmniSTAR Ready) - Part Number - 84588274

• Navigation Controller II - Part Number: 87518983

(The latter method may also be used if the customer is wanting to use existing Navigation Controller II and NH262 Receiver e.g. from his combine – obviously omit ordering the 2 parts above in this scenario). 4) Correction Signal – EGNOS Ready, OmniSTAR (subscription required) or RTK (with extra parts required) - Details in Section 4.

5) Operator Manuals - See Section 5. T7 – IntelliSteer – Retro Fitting All T7 tractors can be retro fitted with IntelliSteer. In order to retro fit such a kit, the following parts are required:

1) Field Install Kit for T7 (see below) – AGR/IntelliSteer Ready Kit (Includes all parts to replicate Option 525 in the wholegood pricelist) New Holland Tier 4A T7 Series Range Command / Power Command with Standard or SideWinder II Armrest Models T7.220, T7.235, T7.250, and T7.260: Kit Part Number: 710070294 Models T7.170, T7.185, T7.200, and T7.210: Kit Part Number: 710070204

Updated 20/03/2012

New Holland Tier 4A T7 Series Auto Command with SideWinder II Armrest Models T7.220, T7.235, T7.250, T7.260, and T7.270: Kit Part Number: 710070274 Models T7.170, T7.185, T7.200, and T7.210: Kit Part Number: 710070214

2) If a screen is fitted, go to item (4)

If no screen is fitted and no Screen Ready kit is fitted, require – Part Number: 719258014

3) The either: a) IntelliView III – - Part Number: 84240406 b) IntelliView IV - Part Number: 84546676

4) Navigation Controller II – Part Number: 87518983

5) NH372 EGNOS/OmniSTAR Ready Receiver – Part Number: 84588274 6) Correction Signal – EGNOS Ready, OmniSTAR (subscription required) or RTK (with extra parts required) - See Pricing and Details in Section 4.

7) Operator Manuals - See Section 5. T8000 – IntelliSteer

T8000 Tractors can be ordered in two ways:

1) Order T8000 “IntelliSteer Ready” (Option 525) + IntelliView Plus II Monitor (Option 522) from the factory – allowing Curved Guidance. Then order: NH372 EGNOS/OmniSTAR Ready Receiver Part Number: 84588274 and the Navigation Controller II Part Number: 87518983

Or

2) Order all components from the factory via the Pricelist. Options from pricelist:

• 525 IntelliSteer Ready • 522 IntelliView Plus II Touch Screen • 523 Navigation Controller II & NH262 Receiver

Updated 20/03/2012

T8000 – IntelliSteer – Retro Fitting All TG/T8000 Tractors, built from February 2006 onwards can be retro fitted with IntelliSteer. In order to retro fit such a kit, please contact the UK PLM Team. For older TG Tractors, please see section 3 (B) of this insert for Trimble AutoPilot Kit Information. T8 – IntelliSteer

All T8. Tractors are IntelliSteer Ready as standard. Then order for completion 1) Option 522 - Factory fit of Navigation Controller II and NH262 (at Level 2 – OmniSTAR Ready) Or NH372 EGNOS/OmniSTAR Ready Receiver Part Number: 84588274 and the Navigation Controller II Part Number: 87518983

T8 – IntelliSteer – Retro Fitting All TG/T8000/T8 Tractors, built from February 2006 onwards can be retro fitted with IntelliSteer. In order to retro fit such a kit, please contact the UK PLM Team. For older TG Tractors, please see section 3 (B) of this insert for Trimble AutoPilot Kit Information T9000 – IntelliSteer All T9000 Tractors are IntelliSteer Ready as standard. Completion parts can be ordered through your Parts Department: 1) NH372 Receiver (Level 2 – EGNOS/OmniSTAR Ready) –

- Part Number: 84588274

2) Navigation Controller II - Part Number: 87518983 3) Correction Signal – EGNOS Ready, OmniSTAR (subscription required) or RTK (with extra parts required) - See Pricing and Details in Section 4.

Updated 20/03/2012

T9 – IntelliSteer All T9. Tractors are IntelliSteer Ready as standard. Then order for completion 1) Option 522 - Factory fit of Navigation Controller II and NH262 (at Level 2 – OmniSTAR Ready) Or NH372 EGNOS/OmniSTAR Ready Receiver (Part Number: 84588274 and the Navigation Controller II (Part Number: 87518983

Updated 20/03/2012

3. B) DGPS Integrated Guidance – Trimble Autopilot (Retro Fit Kits) Trimble AutoPilot Kits Within our PLM Product offering, we are able to sell the Trimble AutoPilot Integrated Guidance System. This allows Hydraulic control of the steering (Identical to IntelliSteer) using DGPS. We can fit these kits to T6000 Tractors, older T7000 Tractors with mechanical, (where IntelliSteer cannot be retro fitted) older TG Tractors (again where IntelliSteer cannot be fitted) as well as NH TM Tractors. We are also able to fit kits to competitive machines, namely JD, MF, Cat, Fendt. For competitive machines, please refer to the "GPS Catalogue", for NH Machines please see below. In order to price a kit, you need each of the parts above, with a choice of the display screen required. These kits then need to be fitted at Dealer End. Below each NH Kit is explained, please follow the process: Firstly, Parts 1-4 for the appropriate Tractor Series are required. Then go to the completion table and add a screen, Navigation Controller II and DGPS Antenna/Receiver: All NH T6000 & TSA (T6010 Plus, T6020 Elite & Plus, T6030 Elite & Plus, T6040 Elite, T6050 Elite & Plus, T6060 Elite T6070 Elite & Plus, T6080 Elite, TSA 100A Plus, 110A Plus, 115A Plus, 125A Plus, 135A Plus). 1) Platform Kit - Part Number: ZTN54035-26 2) Hose & Fitting Kit - Part Number: ZTN59150 3) Remote Engage Foot Pedal (If required) - Part Number: ZTN57259 4) Installation Instructions - See ASIST Home page NH T7000 (New Holland 7030, 7040, 7050, 7060) 1) Platform Kit - Part Number: ZTN54035-52 2) Hose & Fitting Kit - Part Number: ZTN63579 3) Remote Engage Foot Pedal (If required) - Part Number: ZTN57259 4) Installation Instructions - See Trimble Support pages found via the ASIST Home page

Platform Kit includes: Steering Sensor

Platform Kit includes: Steering Control Valve

Navigation Controller II Kit: With Trimble Firmware

Ag25 Antenna FM-750 Display

Trimble FM-1000 Display

...OR...

Updated 20/03/2012

NH TG (New Holland 180, 200, 210, 215, 220, 230, 240, 245, 255, 270, 275, 285, 305) 1) Platform Kit - Part Number: ZTN54035-125 2) Hose & Fitting Kit - Part Number: ZTN67097 3) Remote Engage Foot Pedal (If required) - Part Number: 73313996 4) Installation Instructions - See ASIST Home page NH TM (New Holland TM 120, 130, 140, 155, 175, 190) 1) Platform Kit - Part Number: ZTN54035-122 2) Hose & Fitting Kit - Part Number: ZTN75365 3) Remote Engage Foot Pedal (If required) - Part Number: 73313996 4) Installation Instructions - See ASIST Home page Trimble AutoPilot Completion Parts To complete your kit, select your screen (FM-750 or FM-1000) and accuracy upgrade (OmniSTAR/RTK), see section 1 for these part numbers. To complete the AutoPilot configuration a Nav Controller kit will be needed, this includes addition integration harnesses and Nav controller Note: This is not the IntelliSteer Nav controller, these are not interchangeable.

Part Number

Description

ZTN54425-07

Nav Controller kit for full AutoPilot Installation

ZTN54425-54

Nav Controller kit for AutoPilot Installation for IntelliSteer Ready machines platform kit and hose and fitting kits not required.

Unlock codes for OmniSTAR & RTK Upgrades: To obtain an upgrade code a dealers need to place a regular order through CSPS. To obtain the upgrade code dealers must send an email to the address: eugpsreceiverupgrade@cnh.com including the following info: a) Serial number of the unit for which the upgrade is requested (this number can be found in a label on the light bar itself) b) CNH Part Number of the upgrade code ordered c) CSPS order number of the Part Number of the upgrade code ordered In the following days dealers will receive, via email, a pass code that can be loaded to the receiver following instructions provided via the screen. The same procedure has to be followed to obtain an RTK upgrade code.

N.B. PLEASE ALLOW 48 HOURS FOR THIS PROCESS

Updated 20/03/2012

4. Correction Signals – EGNOS, OmniSTAR and RTK: DGPS – What is Correction? Raw GPS gives us an accuracy on planet earth of +/- 5m. In order to use GPS in Agricultural applications we need to add a Differential Correction. We then call this DGPS. DGPS in the world of New Holland is available at 3 different levels – EGNOS, OmniSTAR and RTK. Below, each of these will be explained along with applications for their use, as well as processes on how to get such correction. DGPS Level 1 – EGNOS EGNOS stands for “European Geostationary Navigation Overlay Service”. This is a free level of correction available to all. This gives a Pass-to-Pass accuracy of +/- 15-20cm. EGNOS is ideal for applications such as Pre-Emergent Fertilising/Spraying, Grassland Work, and light cultivations. Manual, Assisted and AutoGuidance can all be used with EGNOS. When yield mapping on combines, an EGNOS level of correction is also ideal. DGPS Level 2 – OmniSTAR XP/HP

OmniSTAR Sales: Telephone: +31 7031 70900 Email: info@omnistar.nl Website: www.omnistar.nl

What is OmniSTAR? An OmniSTAR Correction signal is required for applications where Guidance is being used for Combining, Arable Drilling, Precision Cultivating etc. This service is supplied by Netherlands based OmniSTAR (See website details above). Accuracy for an OmniSTAR XP Signal is 7-12cm Pass-to-Pass, and 30cm absolute. Accuracy for an OmniSTAR HP Signal is 5-10cm Pass-to-Pass, and 30cm absolute. Which OmniSTAR Signal does my customer require? In the past, OmniSTAR XP Farm has been the licence that your customers required (as long as they were not travelling more than 50km from their base Postcode – if travelling further then a Regional HP Signal would be required)) for both combines and arable drilling operations. Today this can now be ORDERED IN 1 MONTH INCREMENTS, there is NO LONGER a minimum of 3 months subscription required. The Flex-Farm Option has now been removed from the OmniSTAR offering. For pricing on this XP/HP please see pricing within this section. Ordering Procedure 1) Ascertain which signal your customer requires and fill out the Fax Subscription form (see further on in this section). 2) Fill out the OmniSTAR order form – for this you will require the OmniSTAR ID (on the form, written as “Serial Number”) of the NH252 (older) or NH262 Receiver. To obtain this number: (Cont...)

Updated 20/03/2012

a) If using an older NH252 (Blue “New Holland” Text on the side of the receiver, then this number can be obtained from the left hand side of the recess on the receiver - where the ports are located. The number will start 0225 followed by a sequence of digits. This is the OmniSTAR ID

b) If using a newer NH262 receiver (New Holland Agriculture Logo Decal on the side of the receiver) then you need to get this information from the IntelliView Screen. Please follow these simple instructions: On the IntelliView II/Plus II/III Monitor Go to Home – Diagnostics – GPS Scroll Down on this screen – the Screen Extension will only display one message window. “OmniSTAR ID” is displayed – this is the number you require. 3) Complete the Fax order form and send to OmniSTAR. On the form you will be asked when you would like the receiver activating. In order to Download the Library from the satellite, the receiver WILL NEED TO BE POWERED (Ignition on) when the signal is sent. Please make sure that when the signal is sent, the Receiver is Powered and is in CLEAR OPEN SPACE. 4) After the signal is sent, you can Navigate on the IntelliView Monitor: Go to Home – Diagnostics – GPS and in the bottom left hand corner you can see the XP/HP. Expiry Date. This should obviously change when the signal has been received. 5) Any problems re. signal sending/receiving, please speak with OmniSTAR Direct. The Technicians are very helpful and speak excellent English. Please be confident about this process. 6) Please note, after this signal has been sent, a Roll calibration will need to be undertaken. Please speak with your technicians regarding this. They will be well aware of the need to carry out this calibration procedure, AFTER you have an OmniSTAR Subscription. Please find overleaf: 1. Subscription Pricing x 1 Page: In Euro’s. Note: 1 Month VBS, XP, HP+ Options,

and Farm Licence HP+ 2. Draft Fax Order Form x 1 Page

Updated 20/03/2012

Updated 20/03/2012

Updated 20/03/2012

DGPS Level 3 - Virtual Reference Station (VRS) What is VRS? RTK VRS is a correction signal delivered to the tractor or combine by using the GPRS mobile phone network. The actual data exchange is done by a SIM card & GPRS modem mounted in the vehicle cab. The correction data comes from a central Trimble VRS NowTM server which is continually monitoring and analysing data from 115 RTK Base stations spread across the UK and 22 in Ireland. New Holland utilise the GPRS mobile phone network and the Trimble VRS NowTM data to deliver 2.5cm RTK accuracy to any UK customer provided they have mobile phone coverage where they are operating. The package offer will use either Vodafone. O2 or Orange in the UK and O2 in Ireland

Part Number information All screens/receivers must be unlocked to RTK level in addition the DCM-300 modem must be added, part numbers are as follows:

Part Number

Description

ZTN83500-10

DCM300 Kit, Data Transfer, Asset Tracking for FM1000 / FM750 GSM Global

ZTN83500-15

DCM300 Kit, Data Transfer, Asset Tracking for AgGPS 262, GMS Global

Installation To help installation instructions can be found on the ASIST home page. To sell the VRS subscription must become register as a Trimble VRS approved dealer, for further information please refer to Dan Stuart Subscription costs Customers subscribe on line the following site: https://vrsnowstore.trimble.com/default.aspx?region=AGB

Updated 20/03/2012

DGPS Level 4 - Real Time Kinematic (RTK) For very accurate steering control with a Pass-to-Pass accuracy of +/- 2.5cm an RTK Base station can be purchased along with receiver hardware for the tractor. Applications for RTK would include Bed forming, Vegetable Work and situations where many tractors/machines with guidance are required. Once the initial investment has been made in an RTK Base Station, there are no ongoing costs/subscriptions and one base station will provide correction to many tractors/machines. With OmniSTAR, every receiver needs a subscription. RTK provides an absolute accuracy of +/- 2.5cm also. That means that it provides complete repeatability. If a customer has a Fixed Installation Base Station, he can drive down exactly the same swaths year on year. For RTK with FM-750 and EZ Steer (you would not use RTK with Manual Guidance!), RTK receiver details are contained within Section 1 of this insert labelled “Manual Guidance”, all that is required from this section is a base station to transmit the correction (Item (1) on the list below). For NH372’s to work on RTK, you will need to work through the 1-3 list below For Trimble Autopilot, select the RTK upgrades listed in section 1 and then order a base station (Item (1) on the list below.

Updated 20/03/2012

For a complete system the details and components are:- 1) Mobile RTK Base Station - Part Number: ZTN90510-65 Heavy Duty Tripod For Mobile Use – Part Number: ZTN1161 Note: For Fixed Base Station Parts and information. Please refer to the "GPS Catalogue" for more information. Then add to a NH262/NH372 Receiver – (Purchased through Wholegoods or UK Parts): 2) AgGPS 450 - Rover Radio for the NH262/NH372: Part Number: ZTN53696-46 (This item sits below the NH262 receiver and takes the signal from the base station). 3) NH262 Upgrade to RTK (From "OmniSTAR Ready"): Part Number 73313988 (An unlock code to allow the NH262 to work with RTK). 3a) NH372 Upgrade to RTK (From "OmniSTAR Ready"): Part Number ZTN87858 (An unlock code to allow the NH372 to work with RTK). Once your Parts Department have placed the order you need to email: eugpsreceiverupgrade@cnh.com With the following information:

• Serial no of the NH262 Receiver • Part no ordered (73313988) • CSPS no of the order

In the following days dealers will receive via email a pass code that can be loaded to the receiver following instructions provided via the screen. Important note: If you have a NH262 on a T8000 that’s factory fitted you may have to upgrade first to OmniSTAR level, then again to RTK: Part Number: 73313987 (EGNOS to OmniSTAR) - NH262 then ready for EGNOS & OmniSTAR Part Number: 73313988 (OmniSTAR to RTK) - NH262 then ready for EGNOS, OmniSTAR & RTK

You can order both Part Numbers at once and receive both codes at one time but you have to have both.

N.B. PLEASE ALLOW 48 HOURS FOR THIS PROCESS

Updated 20/03/2012

5. NH Operators Manuals Operators Manuals For Display Screens:

 Description 

 

 Version 

 Part Number  

 IntelliSteer Manuals 

 IntelliSteer for IntelliView III  26  84304911 

IntelliSteer for Intelli Plus II & IV  26  84304940 

 Screen Manuals 

 IntelliView III Display  26  84303175 

IntelliView Plus II & IV Display  26  84303199 

 Quick Reference Cards 

 IntelliSteer Screen QRC  26  84305277