Track & Hardware Specialists

Kri

sTra

ck®

KRI STRACK MANU FA CTUR ING LTD. ( A Divis ion of A.K. Dra ft Sea l L td .)

Trac

k an

d H

ard

war

e Sp

ecia

lists

INDEX AND CONTENTSKT TRACK SYSTEMS – *WEIGHTS LISTED = 2 HANGERS

PRODUCT # TRACK TYPE HANGER # WEIGHT LBS (KG) OPERATION PAGEKT56 (wall mount) Single Box KT56HANGER *385 lbs (175 kg) Straight Sliding 1KT47 (wall mount) Single Box KT47HANGER *220 lbs (100 kg) Straight Sliding 2KT61 Single Box KT61HANGER *440 lbs (200 kg) Straight Sliding 3KT41 Single Box KT41HANGER *385 lbs (175 kg) Straight Sliding or Pocket Door 4KT40 Single Box KT40HANGER *220 lbs (100 kg) Straight Sliding or Pocket Door 5KT39 Single Box KT39HANGER *200 lbs (90 kg) Straight Sliding Wall Mount 6KT29 Single Box KT29HANGER *150 lbs (60 kg) Straight Sliding Wall Mount 7KT28 Single Box KT28HANGER *150 lbs (60 kg) Pocket Door 7KT25 Single Box KT25HANGER *100 lbs (45 kg) Pocket Door 8KT31 Single Box KT31HANGER 33 lbs (15 kg) Overhead Sliding For Cables 9KT33D Single Box KT33HANGERSS *132 lbs (60 kg) Straight Sliding 9KT22 Single J KT22HANGER *75 lbs (34 kg) Pocket Door 9KT71 Double Box KT71HANGER *440 lbs (200 kg) Bipass 10KT51 Double Box KT51HANGER *385 lbs (175 kg) Bipass 11KT50 Double Box KT50HANGER *220 lbs (100 kg) Bipass 12KT48 Double Box KT48HANGER *150 lbs (60 kg) Bipass 13KT45 Double Box KT45HANGER *100 lbs (45 kg) Bipass 14KT42 Double J KT42FLATH KT44OFFSETH *60 lbs (27 kg) Bipass 15KT25 Single Box KT25HANGER *100 lbs (45 kg) Multiple Bipass 15KT43 Triple Box KT43HANGER *100 lbs (45 kg) Triple Bipass 16KT53 Triple Box KT53HANGER *220 lbs (100 kg) Triple Bipass 16KT16 Single Box KT16HANGER 90 lbs (40 kg) Centrefold up to 7-1/2 Leaves 17KT15 Single Box KT15HANGER 120 lbs (55 kg) Bifold (2 Leaves) or (4 Leaves) 18KT14 Single Box KT14HANGER 50 lbs (23 kg) Bifold (2 Leaves) or (4 Leaves) 19KT10 Bifold KT190SERIES 30 lbs (13.6 kg) Bifold (2 Leaves) or (4 Leaves) 20

HARDWARE AND ACCESSORIESBifold Door Hardware, Hinges 21Hangers, Brackets 22Guides, Stops 23Pulls, Latches, Knobs 24

POCKET DOOR FRAMESKT FRAME HKD (Half Knock Down) Series - Single and Double 25KT Pocket Frames 26KT FRAME RM (Ready Made) Series - Single and Double 27KT1250 Pocket In A Box Series + KT1258 and KT1260 28KT1080 Pocket In A Box Series 29KT1400 Pocket In A Box Series (Commercial) + KT1410 29

SPECIALTY TRACK SYSTEMSKTDW SERIES – TRACK & CHANNEL FOR EXTERIOR MULTI-SLIDING DOORS

KTDW CONFIGURATIONS 30KTDW SPECIFICATIONS 31KTDW PARTS SELECTIONS 32, 33, 34KTDW DOOR PANEL CONDITIONS 35

KTA6 OPEN RAIL

KTA6 OPEN RAIL SPECIFICATIONS 36KTA6 OPEN RAIL PARTS SELECTION 37

ECLIPSE

HARDWARE SYSTEMS FOR EXTERIOR FOLDING DOORS & WINDOWS BACK COVER

KRISTRACK HISTORY

Kristrack Manufacturing Ltd., a division of A.K. Draft Seal Ltd., was formed in 1991 to compliment theDraf Seal line of weatherstrips and thresholds. Kristrack manufactures and supplies sliding and bifold doortrack with accompanying hardware and accessories. Applications include residential, commercial and industrial.Our manufacturing plant in Burnaby, B.C., Canada, produces a line of specialty pocket door frames custommade in knock down, half knock down, and ready made styles.

Track & Hardware SpecialistsKRISTRACK Weatherstripping Specialists Since 1960

BACK COVER

WWW.ECLIPSEARCHITECTURAL.COM

ARCHITECTURAL SPECIFICATIONS:Maximum Door Weight - 385 lbs (175 kg) using KT56 HANGER. Minimum and Maximum Door Thickness - 13/8” (34.9 mm) to 21/4” (57.15 mm).Vertical Adjustment - 3/4” (19.05 mm).Maximum Capacity - Width and height of door may vary beyond standard sizes provided the weight of each door does not exceed

385 lbs (175 kg) for KT56.Track - Extruded aluminum, punched.Hanger - Plated steel bolt, spin wheel and door plate, aluminum body, nylon wheels with precision ground bearings (KT56).Options - KT99C Fascia clear anodized or custom colour.Fascia - Extruded aluminum, clear anodized, snap on feature. End caps available, (KT98C) order separately.

KT56 COMMERCIAL SERIESWALL MOUNT SLIDING DOOR TRACK, HARDWARE & FASCIA

KT56 MAXIMUM DOOR WEIGHT 385 LBS (175 KG) = 2 HANGERS, NYLON WHEELS, PRECISION GROUND SS BEARINGS

63/8"(162 mm)

MIN.

31/4"(82.55 mm)

TO

MAX.

4"(101.6 mm)TOP OF DOOR

TO TOP OF TRACK

KT56HANGERNYLON

WHEELS

FASCIASNAP ON

OPTIONALKT99C FASCIA & KT98C ENDCAP EXTRUDED ALUMINUMCLEAR ANODIZED ORCUSTOM COLOUR

KT56TRACK

FASTENINGTO WALL

13/8" (34.9mm)

11/32" (26mm)

11/2"(38.1mm)

(NO SCALE)

KT116B FOR DOORSUP TO 13/4

3/16"(5mm)

KT21FLOORCHANNEL

KT117BORKT118BROLLERGUIDE

3/4"(19mm)

NO

SCALE

63/8"(162mm)

(NOSCALE)

KT129B - 2 PIECEINTRACK DOOR

STOP SET

KT118BDOUBLE ROLLERGUIDE

KT117BSINGLE ROLLER GUIDE

STAINLESS STEELROLLERS

(NOSCALE)

UNIVERSAL GUIDE

KT108BPLATED STEEL

(NO SCALE)

(NOSCALE)

CHANNEL IN DOOR.ROLLER GUIDEFLOOR MOUNTED.

KT117B OR KT118B

Full Scale Except as Noted

KT147B

1

Kri

sTra

ck®

(NOSCALE)

Copyright 2008 Kristrack Mfg.

3" (76.2mm)

3” (76.2mm)

KT98CEND CAP

(NOSCALE)

PLATED STEEL

KT56 HANGERNYLON WHEELS/

PRECISION GROUNDBEARINGS

KRI STRACK MANU FA CTUR ING LTD.

FASCIASNAP ON

(NOSCALE)

(45mm)THICK

KT47 COMMERCIAL SERIESWALL MOUNT SLIDING DOOR TRACK, HARDWARE & FASCIA

KT47 MAXIMUM DOOR WEIGHT 220 LBS (100 KG) = 2 HANGERS, NYON WHEELS, BALL BEARINGS, KT47 HANGER


KT118BDOUBLE ROLLERGUIDE

KT117BSINGLE ROLLERGUIDE


(NOSCALE)

(NOSCALE)

KT20CHANNEL

CHANNEL INDOOR, GUIDESURFACEMOUNTED ON FLOOR

DOOR

KT120BSWIVEL GUIDE

KT125BINTRACK

BUMPER STOP

5/16" (8mm) clearance floor tobottom of door


(NO SCALE)

KT116 B FOR DOORSUP TO 13/4" (45mm)

THICK

3/16"(5mm)

1/2"(12mm)

KT 120BSWIVEL GUIDE

KT 20FLOOR

CHANNEL

KT120B RECESSEDIN BOTTOM OF DOOR

3/16"

(5mm)

13/16"to 13/16"(20mm to

30mm)

5/8"(16mm)

1/4"(6.35mm)

5/8"(16mm)

3/4" (19mm)

3/4"(19mm)

ARCHITECTURAL SPECIFICATIONS:Maximum Door Weight - 220 lbs (100 kg) using two KT47 HangersMinimum and Maximum Door Thickness - 13/8” (34.9 mm) to 13/4” (44.45 mm).Vertical Adjustment - 3/8” (9.52 mm).Maximum Capacity - Width and height of door may vary beyond standard sizes provided the weight of each door does not exceed

220 lbs (100 kg) for KT47.Track - Extruded aluminum, punched, lengths up to 192“ (4876 mm)Hanger - Steel construction, zinc plated, 4 nylon wheels, ball bearing.Options - KT47C Fascia clear anodized or custom colour. KT20 or KT21 Floor channel extruded aluminum, clear or bronze anodized.Fascia - Extruded aluminum, clear anodized, snap on feature, lengths up to 192” (4877 mm). End caps available, (KT47EC) order separately.

Full Scale Except As Noted

FLOORCHANNELOPTIONS

25/8"(66.67mm)

4"(101.6mm)

KT47HANGERKT47 TRACK

13/16"(30.16mm)

MIN. max.21/4" to 25/8"

(57 TO 66mm)

TOP OF DOORTO TOP OF

TRACK

11/32" (26mm)

27/16" (61.9mm)

FASTENTO WALL

KT117B OR KT118B

(NOSCALE)

(NOSCALE)

FOR WALL MOUNT SLIDING DOORS

KT121FLOORCHANNEL


OPTIONALKT47CFASCIA & KT47EC ENDCAPEXTRUDEDALUMINUMCLEARANODIZED

NO SCALE

4"(101.6mm)

27/16" (61.9mm)

KT47ECEND CAP


Kri

sTra

ck®

2

Trac

k an

d H

ard

war

e Sp

ecia

lists

Kri

sTra

ck®

3

Trac

k an

d H

ard

war

e Sp

ecia

lists

ARCHITECTURAL SPECIFICATIONS:Maximum Door Weight - 440 lbs (200 kg).Minimum and Maximum Door Thickness - 13/8” (34.9 mm) to 21/4” (57.1 mm).Vertical Adjustment - 1/4” (6.35 mm).Maximum Capacity - Width and height of door may vary beyond standard sizes provided the weight of each door does not exceed

440 lbs (200 kg).Track - Extruded aluminum, punchedHanger - Plated steel / steel wheel / precision ground bearings.Options - KT21 extruded aluminum floor channel with KT117B or KT118B roller guides.

(NOSCALE)

KT61 HANGER• PLATED STEEL• STEEL TIRE• PRECISION GROUND

BEARINGS

(NOSCALE)

KT129BINTRACK 2 PIECEDOOR STOP SET

3/4"(19mm)

2"(50.8mm)

11/32" (26mm)

3" (76.2mm)

KT21FLOOR CHANNELEXTRUDEDALUMINUM

KT61 COMMERCIAL SERIES (STEEL WHEELS)STRAIGHT SLIDING DOOR TRACK & HARDWARE

MAXIMUM DOOR WEIGHT 440 LBS (200 KG) – 2HANGERS

STEEL WHEEL / PRECISION GROUND BEARINGS

13/8" (34.9 mm)

11/2"(38.1mm)

MIN.

23/8"(60mm)

MAX.

25/8"(67mm)

KT61HANGER

KT61TRACK

EXTRUDEDALUMINUM

CLEARANODIZED

ORBRONZE

ANODIZED


KT117BOR

KT118BROLLER GUIDE

KT21FLOORCHANNELEXTRUDEDALUMINUM

KT118BDOUBLE ROLLER GUIDE

KT117BSINGLE ROLLERGUIDE


(NOSCALE)

NOSCALE

(NOSCALE)

UNIVERSAL GUIDE

KT108BPLATED STEEL

11/2"(38.1 mm)

3"(76.2 mm)

2"(50.8 mm)

NO SCALE

KT147BFACE DOORMOUNT BRACKET

KT707STAY ROLLER

Full Scale Except As NotedCopyright 2008 Kristrack Mfg.


Kri

sTra

ck®

4

Trac

k an

d H

ard

war

e Sp

ecia

lists


KT41 COMMERCIAL SERIESSURFACE MOUNT STRAIGHT SLIDING DOOR TRACK &

HARDWARE AND POCKET DOOR TRACK & HARDWAREMAXIMUM DOOR WEIGHT 385 LBS (175 KG) – 2 HANGERS (PRECISION GROUND BEARINGS)

ARCHITECTURAL SPECIFICATIONS:Maximum Door Weight - 385 lbs (175 kg) = 2 hangers.Minimum and Maximum Door Thickness - 13/8” (34.9mm) to 21/4” (51.15 mm).Vertical Adjustment - 1/4” (6.35 mm).Maximum Capacity - Width and height of door may vary beyond standard sizes provided the weight of each door does not exceed

385 lbs (175 kg).Track - Extruded aluminum. Also available KT41SS (Stainless Steel Track) 118” (2997mm) only.Hanger - Plated steel / nylon tire / precision ground bearings. Also available KT41 hangers (All stainless steel)Options - KT21 extruded aluminum floor channel with KT117B or KT118B roller guides. KT142B wall mount brackets. KT147B face door

mount bracket.Component Packs - KT41KIT for single door application, comprising of (poly-bagged) KT41HANGER-2 hangers, KT101B-2 floor mounted

guides, KT123B-1 HD screw on bumper, installation sheet plus all screws, wrench by other.

11/2"(38.1mm) MIN.

23/8"(60 mm)

MAX.

25/8"(67 mm)

KT41CTRACK

KT41DBRONZE ANODIZED

(NOSCALE)

(NOSCALE)

(NOSCALE)


KT21FLOORCHANNEL


WALLMOUNT

(NO SCALE)

KT142B

3/4"(19mm)

11/32" (26mm)

KT21FLOOR CHANNEL

EXTRUDEDALUMINUM

13/8" (34.9 mm)

PLATED STEEL

KT41 HANGERNYLON TIRE/PRECISION

GROUND BEARINGS

KT129B - 2 PIECE KT101B

KT142BWALLMOUNTBRACKET ON 10”(254mm) CENTERS

NYLON FLOOR GUIDE

KT117B OR KT118B




(NOSCALE)

(NOSCALE)

2"(50.8mm)

7/8"(22 mm)

11/2"(38.1 mm)

3"(76.2 mm)

2"(50.8 mm)

NO SCALE


KT41 HANGER

HANGERADAPTORBRACKET, USE WITHKT41 HANGERTOP MOUNTBRACKET



EXTRUDEDALUMINUMCLEARANODIZEDOR

INTRACK DOORSTOP SET

Kri

sTra

ck®

5

Trac

k an

d H

ard

war

e Sp

ecia

lists


KT40 COMMERCIAL SERIESSURFACE MOUNT STRAIGHT SLIDING DOOR TRACK &

HARDWARE AND POCKET DOOR TRACK & HARDWAREMAXIMUM DOOR WEIGHT 220 LBS (100 KG) – 2 HANGERS

ARCHITECTURAL SPECIFICATIONS:Maximum Door Weight - 220 lbs (100 kg) = 2 hangers.Minimum and Maximum Door Thickness - 3/4” (19 mm) to 13/4” (44.45 mm).Vertical Adjustment - 3/8” (9.52 mm).Maximum Capacity - Width and height of door may vary beyond standard sizes provided

the weight of each door does not exceed 220 lbs (100 kg).Track - Extruded aluminum, keyhole punchedHanger - Steel construction zinc plated, 4 nylon wheels ball bearing.Options .kcart 04TK rof stekcarb tnuomllaw-B641TK ,ediug leviws nolyn / etalp B021TK htiw lennahc roolf munimula dedurtxe 02TK -

KT177 privacy & KT178 passage latch for pocket doors.Component Packs - KT40HDKIT for single pocket door application, comprising of (poly-bagged) KT40HANGER-2 hangers, KT107B-1 jamb

mounted guide, KT123B-1 HD screw on bumper, KT157B-1 wrench, installation sheet plus all screws.For biparting pocket doors 2 KT40HDKITs required.KT40KIT for single wall mount application comprising of KT40HANGER-2 hangers, KT102B-2 guides, KT157B-1wrench, installation sheet plus all screws.

11/4" (31.75 mm)

13/16"(30.16mm)

21/4" to 25/8"(57mm to 66mm)

KT40 TRACK

KT146B

KT20CHANNEL

L

CHANNEL INDOOR, GUIDESURFACEMOUNTED ON FLOOR

KT

(NO SCALE)

(NO SCALE)

KT116B FOR DOORSUP TO 13/4" (45mm)

THICK

3/16"(5mm)

3” 11”11” 11” 11” 11” 11” 3”

279mm 76mm

7 WALL MOUNT BRACKETS72” TRACK (1828mm)

72” = 7 BRACKETS96” = 8 BRACKETS(2438 mm)

DOOR

KT120BSWIVEL GUIDE

MIN.

21/4"(57mm)

MAX.

25/8"(66mm)

KT125B INTRACK

BUMPER STOP

5/16" (8mm) clearance floor tobottom of door

KT151SMBHANGER ADAPTOR BRACKET (FACEMOUNT)


KT40HANGER

3/4" to 13/8"(19mm to34.9mm)

3/4" to 13/4"(19mm to 44.45mm)

FOR POCKET DOORFRAME APPLICATION

• 2 X 4 WALL• DOOR THICKNESS



TOP TRACKBRACKET

KT40SINGLE

TOP TRACK

KT40HANGER

3/8"(10mm)

17/8"(47.6mm)

Kri

sTra

ck®

6

Trac

k an

d H

ard

war

e Sp

ecia

lists

ARCHITECTURAL SPECIFICATIONS:Maximum Door Weight - 200 lbs (90 kg) – 2 hangers.Minimum Door Thickness - 13/8” (34.9 mm).Vertical Adjustment - 3/4” (19.05 mm).Maximum Capacity deecxe ton seod rood hcae fo thgiew eht dedivorp sezis dradnats dnoyeb yrav yam rood fo thgieh dna htdiW -

200 lbs (90 kg).Track - Extruded aluminum, punchedHanger - Plated steel bolt, spin wheel and door plate, aluminum body, nylon tires with precision ground bearings.Options - KT177 privacy & KT178 passage latch for pocket doors, 5 finishes available.Component Packs - KT39KIT for 1 door application, comprising of (poly-bagged) KT39HANGER-2 hangers, KT116B-1 jamb mounted guide,

KT129B-2 sets intrack door stop, KT142B-7 wall mounted brackets for 72” (1828 mm) track, installation sheet plus allscrews.

Please note: no neewtebni ertnec no )mm972( ”11 dna kcart fo dne hcae morf )mm67( ”3 detnuom eb dluohs stekcarb tnuom llaw B241TK72” (1828mm) track. Use same spacing on longer lengths.

KT39 FASTRAK COMMERCIAL SERIESWITH KT39 FASTFIX RAPID-RELEASE HANGER

FOR WALL MOUNT SLIDING DOORSMAXIMUM DOOR WEIGHT 200 LBS (90 KG) – 2 HANGERS

KT39HANGERPRECISION GROUNDBEARINGS

EASILY ADJUSTABLE

MIN.

31/4"(82.55 mm)

TO

MAX.

4"(101.6 mm)TOP OF DOOR

TO TOP OF TRACKKT39HANGER

KT142B TOP TRACKBRACKET

KT39TRACKCLEAR OR BRONZE

ANODIZED

13/8" (34.9mm)

31/8" (79.4mm)

11/2"(38.1mm)

(NOSCALE)

KT129B - 2 PI EC EINTRACK DOOR

STOP SET

(NO SCALE)

KT116B FOR DOORSUP TO 13/4" (45mm)

THICK

3/16"(5mm)

3” 11”11” 11” 11” 11” 11” 3”

279mm 76mm

7 WALL MOUNT BRACKETS72” TRACK (1828mm)

72” = 7 BRACKETS96” = 8 BRACKETS(2438 mm)

NO SCALE

37 /16"

(87.3mm)

1" (25.4mm)

NOSCALE

KT39HANGER MAY ALSOBE USED IN KT56 TRACK200 LBS. WEIGHT LIMITSTILL A PPLIE S

( )



31/2" (90mm)

KT107BPLASTIC JAMB MOUNTEDGUIDE FOR 1 3/8" (35mm)DOOR. For 1 3/4" (44mm)DOOR CUT OUT CENTRESECTION OF GUIDE.

INSTALLATION NOTE FOR POCKET FRAMESREPLACE ALL TRACKSCREWS WITH #8 x 11/2" (38 mm)SCREWS (INCLUDED) AFTERFRAME IS INSTALLED (BEFOREDRYWALL).

(TRACK TOSCALE)

NO SCALE

KT

Kri

sTra

ck®

7

Trac

k an

d H

ard

war

e Sp

ecia

lists


KT28 SERIESBALL BEARING AXLE

POCKET DOOR TRACK & HARDWAREMAXIMUM DOOR WEIGHT 150 LBS (60 KG) – 2 HANGERS

KT29 SERIESWALL MOUNT (POCKET LESS) DOOR

TRACK & HARDWARE

ARCHITECTURAL SPECIFICATIONS:Maximum Door Weight - 150 lbs (60 kg) = 2 hangers.Minimum and Maximum Door Thickness - 3/4” (19 mm) to 13/4” (44.45 mm). Up to 13/4”

(44.45 mm) for Pocket Door.Vertical Adjustment - 3/8” (9.52 mm).Maximum Capacity - Width and height of door may vary beyond standard sizes

provided the weight of each door does not exceed 150 lbs (60 kg).Track - Extruded aluminum, keyhole punchedHanger - Steel construction zinc plated / 4 plastic wheels, ball bearing axle.Options - KT177 privacy & KT178 passage latch for pocket doors, 5 finishes available.Component Packs - KT28KIT for 1 door application, comprising of (poly-bagged) KT28HANGER-2 hangers, KT107B-1 jamb mounted guide,

KT122B-1 nail on bumper stop, KT155B-1 wrench, installation sheet plus all screws.For biparting pocket doors two KT28KITs required and 2 KT126B-intrack door stops required.KT29KIT for 1 door application, comprising of (poly-bagged) KT29HANGER-2 hangers, KT116B-1 jamb mounted guide,KT126B-2 in track bumper stop, KT146B-7 wall mounted brackets, KT155B-1 wrench, installation sheet plus all screws.

Please note: KT146B wall mount brackets should be mounted 3” (76mm) from each end of track and 11” (279mm) on centre inbetween on72” (1828mm) track. Use same spacing on longer lengths.

17/16" (37 mm)KT28 TRACK

KT28 HANGER

11/16" (27 mm)

SECTION THROUGH OPENING(NO SCALE)

KT116B FOR DOORS UP TO 13/4"

(45mm) THICK

3/16"(5mm)

21/2"(63.5mm)

KT4WFASCIA

KT4WFASCIA

OPTIONALORDER

SEPERATELY

KT146BWALL MOUNT

BRACKET

MAXIMUM DOOR WEIGHT 150 LBS (60 KG) – 2 HANGERSSURFACE MOUNTED WITH FASCIA. KT FASCIA OPTIONAL

OTHERWISE CUSTOM VALANCE BUILT BY OTHERS TOCONCEAL BRACKETS AND TRACK

MIN.

17/8"(47.62 mm)

MAX.

21/4"(57.15 mm)

11” (279mm)ON CENTRESEE NOTE BELOW

17/8" MIN.

(47.62 mm)21/4" MAX.

(57.15 mm)TOP OF DOOR

TO TOP OF TRACK

KT29HANGER

KT126B INTRACK BUMPER

DOORSTOP

EXTRUDEDALUMINUMPAINTEDWHITE

2" (50.8 mm)

KT29 TRACK


3/4" to 13/8"(19mm to34.9mm)

3/4" to 13/4"(19mm to44.45mm)





Kri

sTra

ck®

8

Trac

k an

d H

ard

war

e Sp

ecia

lists


KT25 SERIESPOCKET DOOR TRACK & HARDWARE

MAXIMUM DOOR WEIGHT 100 LBS (45 KG) – 2 HANGERS

ARCHITECTURAL SPECIFICATIONS:Maximum Door Weight - 100 lbs (45 kg) = 2 hangers.Minimum and Maximum Door Thickness - 3/4” (19 mm) to 1 3/4” (44.45 mm).Vertical Adjustment - 3/8” (9.52 mm).Maximum Capacity - Width and height of door may vary beyond standard sizes provided the weight of each door does not exceed

100 lbs (45 kg).Track - Extruded aluminum, keyhole punched.Hanger - Steel construction zinc plated /4 plastic wheels.Options - KT177 privacy & KT178 passage latch for pocket doors.Component Packs - KT25KIT for 1 door application, comprising of (poly-bagged) KT25HANGER-2 hangers, KT107B-1 jamb mounted

guide, KT122B-1 nail on bumper stop, KT155B-1 wrench, installation sheet plus all screws.For biparting pocket doors two KT25KITs required and 2 KT126B-intrack door stops required.

17/16" (37mm)

31/2" (90mm)

KT25 TRACK

KT25 HANGER

MIN.

17/8"(47.62 mm)

MAX.

21/4"(57.15 mm)

11/16" (27mm)

KT107BPLASTIC JAMB MOUNTEDGUIDE FOR 1 3/8" (35mm)DOOR. For 1 3/4" (44mm)DOOR CUT OUT CENTRESECTION OF GUIDE.

(TRACK TOSCALE)

KT

INSTALLATION NOTE FOR POCKET FRAMES

REPLACE ALL TRACK SCREWS

WITH #8 X 11/2" (38 mm) SCREWS

(INCLUDED) AFTER FRAME IS

INSTALLED (BEFORE DRYWALL).



3/4" to 13/8"(19mm to34.9mm)

3/4" to 13/4"(19mm to44.45mm)






KT22 SERIESPOCKET DOOR TRACK & HARDWAREMAXIMUM DOOR WEIGHT 75 LBS (34 KG) – 2 HANGERS

ARCHITECTURAL SPECIFICATIONS:Maximum Door Weight - 75 lbs (34 kg) – 2 hangers.Minimum and Maximum Door Thickness - 3/4” (19 mm) to 1 3/4” (44.45 mm).Vertical Adjustment - 5/8” (16 mm).Maximum Capacity - Width and height of door may vary beyond standard sizes provided the weight of each door does not exceed

75 lbs (34 kg).Track - Extruded aluminum, keyhole punchedHanger - Steel construction zinc plated / 2 plastic wheels.Component Packs - KT22KIT for 1 door application, comprising of (poly-bagged) KT22HANGER-2 hangers, KT107B-1 plastic jamb

mounted guide, KT122B-1 nail on bumper stop, installation sheet plus all screws.

ARCHITECTURAL SPECIFICATIONS:Maximum Door Weight - 132 lbs (60 kg) – 2 hangers.Minimum and Maximum Door Thickness - 3/4” (19 mm) to 1 3/4”

(44.45 mm).Vertical Adjustment - 1/4” (6.35 mm).Track - Extruded aluminum bronze anodizedHanger - Stainless steel.

15/16" (24mm)

KT22 TRACK

11/8" (38.5mm)

KT22HANGER

13/16" (30mm)

(NO SCALE)

OVERHEAD TRACK SYSTEMCOMMERCIAL SERIESKT31 track using KT31 hanger

for curtain,cables etcMAXIMUM CARRYING CAPACITY PER HANGER

33 LBS (15 KG) USING KT31 HANGER (2 WHEELS)

KT33 SERIES(FOR EXTERIOR SHUTTERS)STRAIGHT SLIDING DOOR TRACK AND HARDWARE

MAXIMUM DOOR WEIGHT

132 LBS (60 KG) – 2 HANGERS

NO SCALE

SECTION THROUGH SHOWINGKT31 CABLE CARRYING HANGER

13/16"(30mm)

KT31HANGER 13/16"

(30mm)

31/16"(78mm)

NOSCALE

KT158B3/16" (5mm) DIA

‘S’ HOOK

KT159BLEATHER

STRAP

CABLEBY

OTHERNO SCALE

KT31 TRACK

CURTAIN OR TARPAULIN BOLTEDTO HANGERS BY OTHERS

HANGER CENTRES SHOULD NOT EXCEED 15" (375mm)

ALTERNATIVE KT146B WALLMOUNTBRACKETS MAY BE USED ON KT31ALUMINUM TRACK

AN OVERHEAD TRACK SYSTEM FOR SUPPORTING TRAILING CABLES,INDUSTRIAL CURTAINS, TARPAULINS, SPORT HALL NETS, ETC.

Kri

sTra

ck®

9

Trac

k an

d H

ard

war

e Sp

ecia

lists

1"(25.4mm)

KT133BINTRACK DOOR STOP -

STAINLESS STEEL

KT145BADAPTOR PLATE

USED TO SECURETOP CARRIER PLATETO PARTICLE BOARD,CHIP-BOARD OR MDF

BOARD.

1"(25.4mm) 15/8"

(41.2mm)TO

17/8"(47.6mm)

KT33DTRACK

BRONZEANODIZED

KT33HANGERSSSTAINLESS

STEEL

KT31TRACK



Kri

sTra

ck®

10

Trac

k an

d H

ard

war

e Sp

ecia

lists

KT71 COMMERCIAL SERIES (STEEL WHEELS)BYPASS DOOR TRACK & HARDWARE

MAXIMUM DOOR WEIGHT 440 LBS (200 KG) – 2HANGERSSTEEL WHEEL/ PRECISION GROUND BEARINGS

ARCHITECTURAL SPECIFICATIONS:Maximum Door Weight - 440 lbs (200 kg) - 2 hangers.Minimum and Maximum Door Thickness - 1” (25.4 mm) to 2” (50 mm).Vertical Adjustment - 1/4” (6.35 mm).Maximum Capacity - Width and height of door may vary beyond standard sizes provided

the weight of each door does not exceed 440 lbs (200 kg).Track - Extruded aluminumHanger - Plated steel / steel tire / precision ground bearings.Options .sediug B811TK ro B711TK htiw lennahc roolf munimula dedurtxe 12TK -

KT147B Face Door Mount Bracket.

(NOSCALE)

KT129BDOOR STOP2-PIECEINTRACK SET

KT71 HANGER

(NOSCALE)

3/4"(19mm)

11/32" (26mm)

KT21FLOOR

CHANNELEXTRUDEDALUMINUM




(NOSCALE)

(NOSCALE)

STEEL TIRE/PRECISIONGROUND BEARINGS

11/2"(38.1 mm)

3"(76.2 mm)

2"(50.8 mm)

NO SCALE

KT147B FACE DOOR MOUNT BRACKET.

UNIVERSAL GUIDE

KT108BPLATED STEEL


HANGERADAPTORBRACKET.USE WITHKT71HANGERTOPMOUNTBRACKET.KT147B

SIDE PLATE

KT71HANGER

KT71TRACK

(2 PIECES SUPPLIED)

CLEAR ANODIZEDOR

BRONZE ANODIZED

KT21FLOOR

CHANNEL

KT117B OR KT118B

(NOSCALE)


3/4"(19mm)

13/8" (34.9mm)

MIN.

23/8"(60 mm)

MAX.

25/8"(67 mm)

11/2"(38.1mm)

KT71HANGER




KT51 COMMERCIAL SERIES (NYLON WHEELS) BYPASS DOOR TRACK & HARDWARE

MAXIMUM DOOR WEIGHT 385 LBS (175 KG) – 2HANGERS (PRECISION GROUND BEARINGS)

ARCHITECTURAL SPECIFICATIONS:Maximum Door Weight - 385 lbs (175 kg) - 2 hangersMinimum and Maximum Door Thickness - 1” (25.4 mm) to 2” (50 mm).Vertical Adjustment - 1/4” (6.35 mm).Maximum Capacity - Width and height of door may vary beyond standard sizes provided

the weight of each door does not exceed 385 lbs (175 kg).Track - Extruded aluminumHanger - Plated steel / nylon tire / precision ground bearingsOptions - KT21 extruded aluminum floor channel with KT117B or KT118B guides.

KT147B face door mount bracket.

11/2"(38.1mm)

(NOSCALE)


33/8" (85.7 mm)

KT117B OR KT118B KT101B

NYLON FLOOR GUIDE

KT51TRACK

KT51HANGER

(NOSCALE)

PLATED STEEL

KT51 HANGERNYLON TIRE/PRECISION

GROUND BEARINGS

(NOSCALE)

KT129B - 2 PIECEINTRACKDOOR STOP SET

3/4"(19mm)

11/32" (26mm)

KT21FLOOR

CHANNELEXTRUDEDALUMINUM

(2 PIECES SUPPLIED)CLEAR OR

BRONZE ANODIZED

11/2"(38.1 mm)

3"(76.2 mm)

2"(50.8 mm)

NO SCALE





(NOSCALE)

(NOSCALE)

Kri

sTra

ck®

11

Trac

k an

d H

ard

war

e Sp

ecia

lists

MIN.

23/8"(60 mm)

MAX.

25/8"(67 mm)

13/8" (34.9 mm)

KT147BSIDE PLATE

KT51HANGER



Kri

sTra

ck®

12

Trac

k an

d H

ard

war

e Sp

ecia

lists


KT50 COMMERCIAL SERIESBYPASS DOOR TRACK & HARDWARE

MAXIMUM DOOR WEIGHT 220 LBS (100 KG) – 2HANGERS

ARCHITECTURAL SPECIFICATIONS:Maximum Door Weight - 220 lbs (100 kg) = 2 hangersMinimum and Maximum Door Thickness - 3/4” (19 mm) to 2” (51 mm).Vertical Adjustment - 3/8” (9.52 mm).Maximum Capacity deecxe ton seod rood hcae fo thgiew eht dedivorp sezis dradnats dnoyeb yrav yam rood fo thgieh dna htdiW -

220 lbs (100 kg).Track - Extruded aluminum, keyhole punchedHanger .gniraeb llab sleehw nolyn 4 / detalp cniz noitcurtsnoc leetS -Options 1 ssenkciht rood muminim ,ediug leviws nolyn / etalp leets B021TK htiw lennahc roolf munimula dedurtxe 02TK - 3/16” (30 mm)

when using floor guide channel.Oblong flush pulls size 15/8” (410 mm) X 41/2” (1143 mm) available in finishes, KT174DCB (dull chrome), KT174PCB powder coatbronze. Also available stainless steel pulls. Refer to page 24.

Component Packs tesffo detnuom roolf 3-B201TK ,sregnah 4-REGNAH05TK )deggab-ylop( fo gnisirpmoc ,noitacilppa rood 2 rof TIK05TK -guides, KT157B-1 wrench, installation sheet plus all screws.

27/8" (73mm)

1/2"(12mm)

3/4" to 2"(19mm to 50mm)

13/16"(30mm)

21/4"to 25/8"(57mm

to 66mm)SWIVEL GUIDE

FLOORCHANNEL

KT50 TRACK


SURFACEMOUNTED ON

BOTTOMOF DOOR

3/16"

(5mm)

13/16"to 13/16"(20mm to

30mm)

1" to 13/8"(25mm to 35mm)

5/8"(16mm)

1/4"(6.35mm)

5/8"(16mm)

3/4" (19mm)

KT125B INTRACK BUMPER STOPFOR KT40 / KT50 TRACK

NO SCALE

KT102B KT102B KT102B

FLOORLINE

KT50HANGER

NO SCALE




KT120B

KT20

KT120B

3/4" TO 13/4"(19 TO 44mm)

DOOR THICKNESS

Kri

sTra

ck®

13

Trac

k an

d H

ard

war

e Sp

ecia

lists


KT48 SERIESBALL BEARING AXLE

BI-PASS DOOR TRACK & HARDWAREMAXIMUM DOOR WEIGHT 150 LBS (60 KG) – 2 HANGERS

ARCHITECTURAL SPECIFICATIONS:Maximum Door Weight - 150 lbs (60 kg) – 2 hangers.Minimum and Maximum Door Thickness - 3/4” (19 mm) to 13/4” (44 mm).Vertical Adjustment - 3/8” (9.52 mm).Maximum Capacity ton seod rood hcae fo thgiew eht dedivorp sezis dradnats dnoyeb yrav yam rood fo thgieh dna htdiW -

exceed 150 lbs (60 kg).Track - Extruded aluminum, keyhole punched. When snap on fascia feature not used, reverse track into opening.Hanger .elxa gniraeb llab ,sleehw citsalp 4 / detalp cniz noitcurtsnoc leetS -Options .ediuG mottoB B021TK htiw lennahC roolF 02TK .etihw detniap ,munimula dedurtxe W4TK -Component Packs - KT48KIT for 2 door application, comprising of (poly-bagged) KT48HANGER-4 hangers, KT106B-1 floor guide,

KT166CB-2 chrome finger pulls, KT155B-1 wrench, installation sheet plus all screws.

1/2"(12mm)

KT 120BSWIVEL GUIDE

KT 20FLOOR

CHANNEL


KT120B SURFACEMOUNTED ON BOTTOM

OF DOOR

3/16"

(5mm)

13/16"to 13/16"(20mm to

30mm)

1"to 13/8"(25mm to

35mm)

5/8"(16mm)

5/8"(16mm)

3/4" (19mm)

STEEL

NYLONSWIVEL GUIDE

2" (50.8mm)

3/4" TO 13/4"(19 TO 44mm)

31/8" (80mm)

21/2"(63.5mm)

3/16" TO 9/16"(5 TO 15mm)

KT105B - SHOWN (OPTIONAL)PLASTIC ADJUSTABLE FLOOR GUIDE3/4" (19mm) TO 2" (50 mm)

KT106B FLOOR GUIDE HIGH PROFILE FOR 1 3/8" (35mm) DOOR ONLY - (INCLUDED WITH KIT)

11/16"(27mm)

17/8" to 21/4"(47.6 to 57.15mm)

KT48 TRACK (NO SCALE)

KT4WFASCIA

KT48HANGER

11/8" (28.5mm)

13/8" (34.9mm)

43/16"(106.3mm)

1"(25.4mm)

DOOR THICKNESS

KT151SMB HANGER ADAPTOR BRACKET(FACEMOUNT)


ORDER



SEPARATELY


ARCHITECTURAL SPECIFICATIONS:Maximum Door Weight - 100 lbs (45 kg) - 2 hangersMinimum and Maximum Door Thickness - 3/4” (19 mm) to 13/4” (44 mm).Vertical Adjustment - 3/8” (9.52 mm).Maximum Capacity - Width and height of door may vary beyond standard sizes provided the weight of each door does not exceed

100 lbs (45 kg).Track - Extruded aluminum, keyhole punched. When snap on fascia feature not used, reverse track into opening.Hanger - Steel construction zinc plated / 4 plastic wheels.Options - KT4W fascia extruded aluminum, painted white.

KT20 extruded aluminum floor channel with KT120B door bottom guide, or KT119B plastic door bottom guide.Component Packs - KT45KIT for 2 door application, comprising of (poly-bagged) KT45HANGER-4 hangers, KT106B-1floor guide,

KT166CB-2 chrome finger pulls, KT155B-1 wrench, installation sheet plus all screws.

2" (50.88mm)

31/8" (80mm)

21/2"(63.5mm)

KT4WFASCIA

KT105B - SHOWN (OPTIONAL)PLASTIC ADJUSTABLE FLOOR GUIDE3/4" (19mm) TO 2" (50 mm)

KT106B FLOOR GUIDE HIGH PROFILE FOR 1 3/8" (35mm) DOOR ONLY - (INCLUDED WITH KIT)

11/16"(27mm)

17/8" TO

21/4"(47.62 TO

57.15mm)1/2"

(12mm)

KT 120BSWIVEL GUIDE

KT 20FLOOR

CHANNEL


KT45 TRACK


OF DOOR

3/16"

(5mm)

13/16"to 13/16"(20mm to

30mm)

1"to 13/8"(25mm to

35mm)

5/8"(16mm)

5/8"(16mm)

3/4" (19mm)

STEEL

NYLONSWIVEL GUIDE

1/4"(6.35mm)

NOTE: ADD 21/2” (63.5mm) TO DOOR HEIGHT FOR FINISHED OPENING.

Kri

sTra

ck®

14

Trac

k an

d H

ardw

are

Spec

ialis

ts

KT45HANGER

11/8" (28.5mm)

13/8" (34.9mm)

43/16"(106.3mm)

1"(25.4mm)



ORDERSEPARATELY

3/4" TO 13/4"(19 TO 44mm)

DOOR THICKNESS

KT45 SERIESBI-PASS DOOR TRACK & HARDWARE




Kri

sTra

ck®

15

Trac

k an

d H

ard

war

e Sp

ecia

lists

KT42 SERIESBI-PASS DOOR TRACK & HARDWARE


ARCHITECTURAL SPECIFICATIONS:Maximum Door Weight - 60 lbs (27 kg).Minimum and Maximum Door Thickness - 3/4” (19 mm) to 13/8” (35 mm).Vertical Adjustment - 3/8” (9.5 mm).Maximum Capacity - Width and height ofdoor may vary beyond standard sizes providedthe weight of each door does not exceed 60 lbs (27 kg).Track - Extruded aluminum, keyhole punched.Hanger - Steel construction zinc plated / oneplastic wheel.Options - KT4W fascia extruded aluminum,painted white.Component Packs - KT42KIT for 2 doorapplication, comprising of (poly-bagged)KT42FLATH-2 hangers, KT44OFFSETH-2 hangers, KT106B-1 floor guide, KT165CB-2chrome finger pulls, installation sheet plus allscrews.

113/16" (46mm)

3/4" TO 13/8"(19 TO 35mm)

2" (50.8mm)

KT4WFASCIA EXTRUDED ALUMINUM PAINTED WHITE

KT42 TRACK

KT42FLATHHANGER

13/16"(30mm) 11/4"

TO15/8"

(32 TO

40mm)

KT44OFFSETHHANGER


Hardware for Multiple Sliding Interior Doors using KT25 SeriesThe Multipe interior sliding system is designed to slide shutters and doors up to 100 lbs (45 kg) each in residential or commercial applications. A number of doors may be installed as parallel sliding. Collectors can be used to pick up one panel with thenext as they are operated.Panel Sizing. Maximum recommended panel dimensions: 8’ (2440 mm) high, 4’ (1220 mm) wide.

KT19 FLOORCHANNEL.ALUMINUM, SURFACE MOUNT

CHANNELSIZE

3/16" x 3/16"(4.76mm x4.76mm)

KT101BWHITE NYLONFLOOR GUIDE

KT25TRACK

OptionalIntrack

Track Stop

Bore 12.7 (1/2”) hole 65 (29/16”) deep

KT114BSPRING LOADED DOORGUIDE

61/4”

85/16”

KT103B & KT104B use 6 x 19mm (1/4” x 3/4”) Groove

KT156BNYLON

COLLECTOR

AND

SHIM(2 Pc SET)

KT103BSTAINLESS STEELLINK GUIDE FOR

13/8” (35mm)DOORS.

KT104BSTAINLESS STEELLINK GUIDE FOR

13/4” (45mm) DOORSNo Scale

11/8" (28.5mm)

13/8" (34.9mm)

43/16"(106.3mm)

1"(25.4mm)

1/4"(6.35mm)

13/16"(20.6mm)

3/16" (4.76mm) THICK

1/16" (1.59mm) THICK

1" (25.4mm)

111/16"(42.8mm)

FASTENTRACK ANDFASCIA TOHEADERHERE

KT4W FASCIAOPTIONALORDER SEPARATELY

21/2"(63.5mm)



KT4W FasciaMay be used with KT43 or KT53 Series

Kri

sTra

ck®

16

Trac

k an

d H

ard

war

e Sp

ecia

lists

1/2"(12mm)

KT120BSWIVEL GUIDE



OF DOOR

3/16"

(5mm)

13/16"to 13/16"(20mm to

30mm)

1"to 13/8"(25mm to

35mm)

5/8"(16mm)

5/8"(16mm)

3/4" (19mm)

3/4" TO 13/4"(19 TO 44mm)

11/16"(27mm) 17/8"

TO21/4"(47.62 TO

57.15mm)

DOOR THICKNESS

3/4" TO 13/4"(19 TO 44mm)

DOOR THICKNESS

KT43 SERIESTRIPLE BI-PASS DOOR TRACK & HARDWARE


KT53 COMMERCIAL SERIESTRIPLE BI-PASS DOOR TRACK & HARDWARE


KT20FLOOR

CHANNEL

3/4" to 2"(19mm to 50mm)

3/4" to 2"(19mm to 50mm)

13/16"(30mm)

21/4"to 25/8"(57mm

to 66mm)

KT102B KT102B KT102B

FLOORLINE

FLOORLINE

KT106BFLOOR GUIDE

INCLUDED

KT53 HANGER KT53 HANGER

No Scale

31/4" (83mm) 17/16" (37mm)

11/4" (31.75mm)27/8" (73mm)

Component Pack -KT53KIT for 3 door application, comprising of(poly bagged) KT40 hanger -6 hangers, KT102B - 6guides, KT157B- 1 wrench,installation sheet plus allscrews

Component Pack - KT43KIT for 3 door application, comprising of (poly bagged) KT25 hanger - 6hangers, KT106B - 2 floor guides, KT166CB - 3 chrome finger pulls, KT155B - 1 wrench, installation sheet plusall screws

KT43HANGER

NOSCALE


No Scale


Kri

sTra

ck®

17

Trac

k an

d H

ard

war

e Sp

ecia

lists

KT16 CENTREFOLD RESIDENTIAL ORCOMMERCIAL SERIES

INTERIOR FOLDING DOOR TRACK & HARDWARE(1) MAXIMUM DOOR WEIGHT 45 LBS (20 KG) PER PANEL WHEN USING KT16-2 (2 WHEEL HANGER)

(2) MAXIMUM DOOR WEIGHT 90 LBS. (40 KG) PER PANEL WHEN USING KT16-4 (4 WHEEL HANGER)

TOP TRACKEXTRUDEDALUMINUMKT16CLEAR OR BRONZEANODIZED

KT16C CLEAR ANODIZEDKT16D BRONZE ANODIZED

KT16 features mid-panel placement of pivotingcarriers, allowing door panels to stack againstthe door jamb with even parts inside and outside of an opening.

CARRIER MOUNTING DETAIL

KT117BSINGLE BOTTOMROLLER GUIDESTAINLESS STEEL

KT21 FLOOR CHANNELEXTRUDED ALUMINUMCLEAR ORBRONZE ANODIZED

KT21C CLEARKT21D BRONZE

KT16-2H2 WHEEL CARRIERWITH NYLON TIRES

This system uses full sized panels with a half panel (hinged to the jamb) with Eclipse™ E2H hinges.Doors are secured with dropbolts. Control of the bottom of the panels is done with roller guildes andchannel.

SOME PANEL CONFIGURATIONS1 1/2 each way

2 1/2 + 1 1/2 (incl. service panel)

4 1/2 up to 7 1/2 one way (incl. service panel)

As illustrated, an odd number of panels is required to swing a service door.

KT16 SPECIFICATIONS

Max Panel Weight 20 kg (45 lbs) using OR KT16-2 Hanger

Max Panel Weight 40 kg (90 lbs) usingKT16-4 Hanger

Max Opening 12.3 m (40 ft)

Max Panel Height 2743mm (9 ft)

Max Panel Width 820mm (32”)

Max Panel Thickness 35mm (1-3/8”)

Max Number of Panels 7-1/2 each way

KT16-4H4 WHEEL CARRIERWITH NYLON TIRESKT16-4HSS4 WHEEL CARRIERWITH NYLON TIRESALL STAINLESS STEELINCLUDING BEARINGS

PANEL SIZINGHalf-width doorpanels attached tothe door jambsfacilitate the centre-fold function.

KTE22H (HINGE SETS)KTE22HNHSS STAINLESS STEEL (3 pc. set)KTE22HNHSTG PVD BRASS (3 pc. set)KTE22HNHSQ POWDER COAT BRONZE (3 pc. set)

KTDBSY - SYMPHONY STYLE1” (25.4mm) THROW LENGTHREGARDLESS OF BOLT LENGTH

3 FINISHES;SATIN ALUMINUM, BRIGHT GOLD ALUMINUM, BRONZE POWDER COAT ALUMINUM

FLUSHBOLTSROUND END

8” (200mm)OR

16” (400mm)OR

24” (600m)OR

39” (1000mm)

Copyright 2008 CENTOR

113/32"

21/2"

63/64"

63/64"

417/32"9/16"

63/64"

15/32"

optionaladditionalcarrier forheavy doors(20kg-40kg)panel weight

11/32" (26mm)

3/4"(19mm)

No Scale

15/32"

7/64"


Kri

sTra

ck®

18


KT15 COMMERCIAL SERIESBIFOLD DOOR TRACK & HARDWARE

MAXIMUM DOOR WEIGHT 120 LBS (55 KG) – ONE HANGER

ARCHITECTURAL SPECIFICATIONS:Maximum Leaf Weight .)sevael 2( rood dlofib rep )gk 55( sbl 021 ro fael dlofib rep )gk 5.72( sbl 06 ot pU -Minimum and Maximum Leaf Thickness - 3/4” (19 mm) to 13/4” (44 mm).Maximum Door Height - 96” (2438 mm).Maximum Leaf Width - 24” (609 mm).Vertical Adjustment - 1/4” (6.35 mm).Maximum Capacity - For door leaves over 18” (457 mm) wide and/or over 33 lbs (15 kg) in weight, bottom guiding system must be

employed (see above detail).Track - Extruded aluminum, keyhole punchedHanger .gniraeb llab sleehw nolyn 4 / detalp cniz noitcurtsnoc leetS -Pivots Top & Bottom - Steel housing zinc plated, top spring loaded, bottom nylon socket slide.Options - KT20 extruded aluminum floor channel, with KT120B steel plate / nylon swivel guide, KT181 hinges.Component Packs - KT15KIT-2L for 2 leaf application, comprising of (poly-bagged) 1-KT15HANGER, 1 set top and bottom pivots, 1 knob,

1 wrench, installation sheet plus all screws.*Note: for multiple leaves folding to one side use 1-KT15KIT-2L for the first 2 leaves and for each additional 2 leaves

add 1-KT15HANGER and one bifold door knob KT189WPB.

2 LEAVES = 1 DOOR

4 LEAVES = 2 DOORS

KT151B

KT120BNYLON SWIVELDOOR GUIDE

13/16" (30mm)

1/2"(12.7mm)

BOTTOM GUIDING FOR DOORSOVER 18 IN. (457m) WIDE)SECTION THROUGH OPENING

SECTION SCALE FULL SIZE1/2

KT15 TRACK(TO SCALE)

KT15 HANGER

13/16"(30.16 mm)

11/4" (31.75 mm)

PLANS SHOWING FOUR LEAVES FOLDING TO ONE SIDE. (NO SCALE)

(NO SCALE)

PULL HANDLEAND BOLT

ALTERNATIVE TOPTRACK WALL MOUNT

MINIMUM 1/2” (12mm)MAXIMUM 7/8” (22mm)

MINIMUM 5/8” (16mm)MAXIMUM 7/8” (22mm)

3/4" to 13/4"(19mm to 44mm)

1” to 13/8"(25mm to

35mm)

1/4"(6 mm)

KT146BTRACK BRACKETON 11" (279mm)CENTRES

OP

EN

ING

LE

SS

21 /2" (

65m

m)

113/16" (46mm)to

21/16" (52mm)

DIAMETER OFHOLE

13/32"(10mm)




Trac

k an

d H

ard

war

e Sp

ecia

lists

PULL HANDLEAND BOLT

KT15PIVOTS

KT15HANGER

19/16" 1/4"(6 mm)

19/16"(40 mm) (40 mm)

EQUAL EQUAL

KT120 ALUMINUMFLOOR CHANNEL

HINGES NOTSUPPLIED

DOORTHICKNESS

MIN. DOORTHICKNESS

KT15 HANGERFOLDING DOOR

HANGER

113/16" (46mm)

111/16" (43mm)

3/4" (19mm)

HINGES3 PERJOINT

ELEVATION 2 LEAVES FOLDING TO ONE SIDE

Kri

sTra

ck®

19


KT14 SERIESMEDIUM DUTY BIFOLD DOOR TRACK & HARDWARE

MAXIMUM DOOR WEIGHT 50 LBS (23 KG) – ONE HANGER

ARCHITECTURAL SPECIFICATIONS:Maximum Leaf Weight .)sevael 2( rood dlofib rep )gk 32( sbl 05 ro fael dlofib rep )gk 21( sbl 52 ot pU -Minimum and Maximum Leaf Thickness - 1” (25 mm) to 13/8” (35 mm).Maximum Door Height - 84” (2134 mm).Maximum Leaf Width - 24” (609 mm)Vertical Adjustment - 3/8” (9.52 mm).Track ,)mm 9121( ”84 ,)mm 419( ”63 ,)mm 267( ”03 ,)mm 906( ”42 ,)mm 754( ”81 sezis dradnatS .dehcnup elohyek ,munimula dedurtxE -

60” (1524 mm), 72” (1828 mm), 96” (2438 mm). KT149B-1 top pivot bracket included in track up to and including 36” (914 mm). Track lengths of 48” (1219 mm) and greater include 2 brackets.

Hanger - Steel construction zinc plated / 4 plastic wheels.Hardware - Individual components are either steel construction plated and/or plastic.Options - KT181 hinge for bifold doors. Bifold door knobs available. Component Packs - KT14KIT-2L for 1 door (2 leaf) application, comprising of (poly-bagged) KT189WPB-1 bifold door knob, KT150B-1

bottom jamb bracket, KT200B-1 bottom door pivot, KT199B-1 top door pivot, KT14HANGER-1 top hanger, KT195B-1two leaf snugger, KT157B-1 wrench, KT197B-1 door aligner, KT149B-1 top track pivot bracket, installation sheet andscrews.

17/16" (37mm)

KT14HANGER

11/16" (27mm)

ADJUSTABLE5/8" TO 15/8"(16 TO 41mm)

FINISHEDOPENING

LESS

21/2" TO31/2"

(63.5 TO88.9mm)

17/8"TO

21/4"(47.62 to

57.15 mm)

7/8" (22.2 mm) MIN. NEEDED TO INSTALL.

KT195B2 LEAF SNUGGER

(1 DOOR)

KT189WPBBIFOLD DOOR KNOB

2 LEAVES = 1 DOOR

4 LEAVES = 2 DOORS

KT197BDOOR ALIGNER

NO SCALE

NO SCALE



Trac

k an

d H

ard

war

e Sp

ecia

lists

Kri

sTra

ck®

20


KT10 SERIESBIFOLD DOOR TRACK & HARDWARE

MAXIMUM DOOR WEIGHT 30 LBS (13.6 KG)

ARCHITECTURAL SPECIFICATIONS:Maximum Leaf Weight .)sevael 2( rood dlofib rep )gk 6.31( sbl 03 ro fael dlofib rep )gk 8.6( sbl 51 ot pU -Minimum and Maximum Leaf Thickness - 3/4” (19 mm) to 13/8” (35 mm).Maximum Door Height - 80” (2032 mm).Maximum Leaf Width - 24” (609 mm).Vertical Adjustment - 5/8” (16 mm).Track ,)mm 419( ”63 ,)mm 267( ”03 ,)mm 906( ”42 ,)mm 754( ”81 sezis dradnatS dehcnup elohyek ,etihw detniap ,munimula dedurtxE -

.)mm 8342( ”69 ,)mm 8281( ”27 ,)mm 4251( ”06 ,)mm 9121( ”84retaerg dna )mm 9121( ”84 fo shtgnel kcarT .)mm 419( ”63 gnidulcni dna ot pu kcart ni dedulcni tekcarb tovip pot 1-B391TK

include 2 brackets.Hardware - Individual components are either steel construction plated and/or plastic.Options - KT181 hinge for bifold doors. Bifold door knobs available in 5 finishes.Component Packs - KT10KIT for 1 door (2 leaf) application, comprising of (poly-bagged) KT189WPB-1 bifold door knob, KT190B-1 bottom

jamb bracket, KT191B-1 bottom door pivot, KT192B-1 top door pivot, KT194B-1 top roller guide, KT195B-1 two leafsnugger, KT197B-1 door aligner.

1" (25mm)

3/4" TO13/8"

(19mm TO 35mm)

1/2"(13mm)

1/8" TO 3/4"(3mm TO 19mm)

11/16" TO19/16"

(17mm TO40mm)

5/8" TO 11/4"(16mm TO 32mm)

FINISHEDOPENING

LESS

15/16" TO213/16"

(33mm TO72mm)

KT193B

KT192B

KT191B

KT190B

KT194B

KT10 TRACKWITH KT193B INTRACK TOP BRACKET

2 LEAVES = 1 DOOR

4 LEAVES = 2 DOORS

KT189WPBBIFOLD DOOR KNOB

KT195B2 LEAF SNUGGER

(1 DOOR)

KT197BDOOR ALIGNER

NO SCALE

BACK VIEW



Trac

k an

d H

ard

war

e Sp

ecia

lists

Kri

sTra

ck®

21

HARDWARE & ACCESSORIESBIFOLD DOOR HARDWARE, HINGES

KT193B TOP INTRACK PIVOT BRACKET

KT192B TOP DOOR PIVOT

KT191B DOOR BOTTOM

PIVOT

KT190BBOTTOM JAMB BRACKET

KT181B HINGE FOR BI FOLD

DOORANTIQUE BRASS FINISH

KT182CB - CHROMEKT183ORR - OIL

RUBBED BRONZEKT15 PIVOT ASSEMBLY

KT197B DOOR ALIGNER

KT198B BIFOLD DOOR BOTTOM BRACKET

FOR MULTIPLY OPENINGSKT115B

SPRING GUIDE UNIVERSAL STYLEFOR BIFOLD DOOR TRACK

KT194B TOP ROLLER GUIDE

KT195B 2 LEAF SNUGGLER (1 DOOR)

BOTTOM PIVOTSLIDE ANDHOUSINGSCREWED TOFLOOR

SPRING LOADEDTOP PIVOT - SIDEVIEW

BOTTOM PIVOT - SIDE VIEW

No Scale

7/16"O.D.

125/32" (44.4mm)

17/8"(47.8mm)

11/2"(38.1mm)

11/2"(38.1mm)

11/8"(28.5mm)

1"(25.4mm)

11/2"(38.1mm)

4"(101.6mm)

11/2"(38.1mm)

11/4"(31.7mm)

21/2"(63.5mm)

21/2"(63.5mm)

23/4"(69.8mm)

2"(50.8mm)

23/16"(55.5mm)

113/16"(46mm)

7/8"(22.4mm)

7/8"(22.4mm)

O.D.

1/4" (6.3mm) I.D.

1/4" (6.3mm)

1/4" (6.3mm) O.D.

1/4" (6.3mm) I.D.

1/2"(12.7mm)

9/16"(14.2mm)

7/16"(11.1mm)

O.D.

7/32"(5.5mm) I.D.

7/16"(11.1mm)

O.D.

3/8"(9.5mm)

15/16" (23.8mm)

7/16"(11.1mm)

O.D.

7/16"(11.1mm)

15/8"(41.2mm)

21/2"(63.5mm)

111/16"(42.8mm)

KT 14 SE RI ESHA R DWA R E

STEEL PIN



Trac

k an

d H

ard

war

e Sp

ecia

lists

Kri

sTra

ck®

22

No Scale

NO SCALE

3/4"(19.05mm)

HARDWARE & ACCESSORIESHANGERS, MISCELLANEOUS

KT40HANGERBALL BEARING

FOR STRAIGHT SLIDINGALSO KT 50H A NG ERAND KT 53HAN GE R

KT15HANGERBALL BEARING

FOR BIFOLD

KT41HANGERNYLON TIRE/PRECISION

GROUND BEARINGSOR KT41HANGERSS (STAINLESS STEEL)

PLATED STEEL

KT31HANGER(2 WH EELS )

KT158B3/16" (5mm)DIAMETER‘S’ HOOK

KT159BLEATHER

STRAP

CABLEBY OTHER

KT42FLATH HANGER

KT44OFFSETH HANGERKT22HANGER

DOUBLE WHEEL AXLE BEARINGKT157BWRENCH - STEEL for KT15, KT40, KT50, KT53

KT81POCKET DOOR STIFFENER, GALVANIZED STEEL

LENGTHS - 81" (2057mm), 82" (2082mm), 86" (2184mm), 96" (2438mm)ALSO KT83, KT84, KT96.

KT146BWALL MOUNT BRACKET FOR KT29 TRACK

KT

(6.35mm)

(12.7mm)

(22.22mm)

(22.22mm)

(6.35mm)

(6.35mm)

KT51HANGER OR KT56HANGERNYLON TIRE/PRECISION

GROUND BEARINGS

PLATEDSTEEL

(NOSCALE)

(NOSCALE)

KT71HANGERSTEEL TIRE/

PRECISION GROUND BEARINGS

PLATED STEEL

KT61HANGERPLATED STEEL/STEEL TIRE/ PRECI-

SION GROUND BEARINGS

PLATED STEEL

11/2"(38.1 mm)

3"(76.2 mm)

2"(50.8 mm)

TOP AND FACE OF DOOR-COMBINATION MOUNTING FOR KT41, 51, 61, 71 HANGERS.

KT147B OPTIONAL ORDER SEPARATELY.

KT147BSIDE PLATE

NO SCALE


KT142BWALLMOUNTBRACKET FORKT41 TRACK KT145B

FORKT33HANGER

ADAPTOR PLATE USED TOSECURE TOP CARRIER PLATE

TO PARTICLE BOARD, CHIP-BOARD OR MDF BOARD.

KT25HANGERALSO

KT45HANGERKT43HANGERKT14HANGER

KT28HANGERALSO

KT29HANGERKT48HANGER


KT155B WRENCH FORKT14, KT25KT28,KT29, KT43, KT45,KT48


KT16-2H2 WHEEL CARRIERWITH NYLON TIRES


Trac

k an

d H

ard

war

e Sp

ecia

lists

Kri

sTra

ck®

23

No Scale

HARDWARE & ACCESSORIESGUIDES, DOOR STOPS

FLOOR GUIDEKT105B

PLASTIC - 3 PIECE ADJUSTABLEFOR BI PASS DOORS

DOOR GUIDEKT116B

STEEL & PLASTIC FOR WALLMOUNT SLIDING DOORS

KT125B INTRACK BUMPER STOP FOR KT40 /

KT50 TRACK KT53 TRACK

KT123B RUBBER BUMPERSTOP SCREW ON

KT126B INTRACK BUMPER

STOP FOR KT25 TRACKAND KT28 TRACK

KT122B RUBBER BUMPER

STOP NAIL ON

POCKET DOOR GUIDE FOR 13/8" (34.9mm) DOORKT107B

CUT IN HALF FOR 13/4" (44.4mm) DOOR

FLOOR GUIDEKT106B

PLASTIC - (HIGH PROFILE) FORBI PASS DOORS

FLOOR GUIDEKT102B PLASTIC

KT119BNYLON GUIDE FOR KT20

FLOOR CHANNEL

KT120B SWIVEL GUIDE FOR KT20

FLOOR CHANNEL

DOOR GUIDE FITTED TOREVEAL FOR DOORS UP TO 1 3/4" (44.4mm) THICK

DOOR

31/4" (82.5mm)

11/4"(31.7mm)

21/2"(63.5mm)

3/4"(19mm)

1/4"(6.3mm)

7/16"(11.1mm)

7/8"(22.2mm)

3 /4"(19mm)

1" (25.4mm)

REFER TOPAGE 17

KT101B

POCKET JAMB GUIDEKT111B PLASTIC

NYLON FLOOR GUIDE

7 /8"

5/8" (15.8mm)

(NOSCALE)

KT129BINTRACKDOOR STOPFOR KT41,51, 61, 71.

KT707STAY ROLLER

KT 114B

USE WITH FLOORCHANNEL (KT19)MULTI-SLIDESYSTEM. REFERTO PAGE 15.

SPRING-LOADED NYLON PLUNGERGUIDE DRILL 1/2" x 21/4" (13 x 55mm) HOLE

FLOOR MOUNTED GUIDEKT117B OR KT118B

KT108BPLATED STEEL

UniversalGuide

2"(50.8mm)

2"(50.8mm)

41/2"(114 mm)

3"(76.2mm)

2"(50.8 mm)

SUITS DOORS 11/4” to 21/8”THICKNESS (32 to 54 mm)

INTRACK DOOR STOP

KT133B FOR KT33DTRACK

3/4" (19mm)

27/8"(73mm)

11/8" (28.5mm)

13/8" (34.9mm)

43/16"(106.3mm)

1"(25.4mm)


L-BRACKET MOUNTED TO TOP OF DOOR ANDBUMPER STOP MOUNTEDIN TRACK

2"

(50.8mm)

L-BRACKET HITS INTRACKSTOP NOT THE HANGER.

KT118B DOUBLEROLLER GUIDEFOR KT21FLOORCHANNEL


(NOSCALE)

1"(25.4mm)

3/4"(19.05mm)

KT117B SINGLEROLLER GUIDE FOR KT21 FLOORCHANNEL

DOOR MOUNTED GUIDEKT117B OR KT118B

KT21

41/2"(114mm)

FLOOR GUIDE KT109BSTEEL BASE W/NYLON TIPSADJUSTABLE TO 13/8" (34.9MM)

(15.8mm)

(117.4mm)

(38.1mm)


Trac

k an

d H

ard

war

e Sp

ecia

lists

Kri

sTra

ck®

24

No Scale

HARDWARE & ACCESSORIESPULLS, LATCHES, KNOBS

FLUSH PULLKT167BB BRASSKT168CB CHROME

BIFOLD DOOR KNOB PLASTICKT189WPB WHITE

FLUSH PULLKT174DCB DULL CHROMEKT174PCB POWDER COAT BRONZE

FLUSH PULLKT165BB BRASSKT166CB CHROME

FLUSHPULL

POCKET DOOR PRIVACY LOCK SET

KT177BRASSKT177CHRM (CHROME)KT177DULLCH (DULL CHROME)KT1770RR OIL RUBBED BRONZEPOCKET DOOR PASSAGE SET

KT178BRASSKT178CHRM (CHROME)KT178DULLCH (DULL CHROME)KT1780RR OIL RUBBED BRONZE

POCKETDOOREDGEPULL

KT175BB BRASSKT171BB BRASS

3/4"(19mm)

3/4"(19mm)5/8"

(15.8mm)

1"(25.4mm)

5/16"(7.9mm)

1/2" (12.7mm)

21/8"(53.9mm)

13/8"(9.5mm)

31/2"(88.9mm)

31/4"(76.2mm) 3"

(76.2mm)

7/16" (11.1mm)

41/2"(114mm)

111/16" (42.8mm)

41/2"(114mm)

CUT- AWAY VIEWONE-HALF TURN OF KEY RAISES TONGUE AND LOCKS DOOR FROM ENTERING POCKET.

POCKET DOOR LOCK ORBIPASS DOOR LOCK

EDGE OF DOOR CUTOUT13/4" WIDE x 27/8" HIGH (44.45mm to 73.02mm)

FOR 13/8" OR 13/4" (34.9mm to 44.45mm)DOOR THICKNESS

FOR 13/8" OR 13/4" (34.9mm to 44.45mm)DOOR THICKNESS

ALL METAL CONSTRUCTION

FINISHING RING

KEYED LOCKKT179BRASS - BRASS

KT179CHRM - CHROMEFOR 13/8" or 13/4"

DOOR THICKNESS

KT161SSBSTAINLESS STEEL,PVC COATED, 33WIDE, 114 LONG,DEPTH AT DEEPESTPOINT 10.

KT162SSBSTAINLESS STEEL,PVC COATED, 36WIDE, 135 LONG,DEPTH AT DEEPESTPOINT 12.5.

• FOR 13/8" or 13/4" DOOR• 23/8" (60.3mm) BACKSET• 21/8" (54mm) BORING• 4 FINISHES

MORTISE11/4" X 37/16"

M3 COUNTERSUNK SCREW HOLE.

KNOB 1 1/4” (32mm) DIAMETERKT290DCB DULL CHROME

KT176BB POLISHED BRASSKT176DCB DULL CHROME

POCKET DOOR EDGE PULL


5/64"(1.85mm)

221/64" (59mm)

3/4"(19mm)

7/16"(10.80mm)

ROUND POCKET DOOR

PRIVACY SET KT677 ORPASSAGE SET KT678

Trac

k an

d H

ard

war

e Sp

ecia

lists


CUTOUTSIZE

89 mm(3-1/2”)

9 mm(5/16”)

25 mm(1”)

CUTOUTSIZE

108 mm(4-1/4”)

10 mm(3/8”)

25 mm(1”)

25 mm(1”)

25 mm(1”)

Kri

sTra

ck®

25

KT-FRAME HKD SERIESPOCKET DOOR FRAMES (HALF KNOCK DOWN STYLE)

SINGLE AND DOUBLE

Standard size frames available in both single and double, for 41/2” (114 mm) and 61/2” (165.1 mm) wall thickness.

1'6" x 6'8" 457 mm x 2032 mm 2'4" x 6'8" 711 mm x 2032 mm 2'10" x 6'8" 863 mm x 2032 mm2'0" x 6'8" 609 mm x 2032 mm 2'6" x 6'8" 762 mm x 2032 mm 3'0" x 6'8" 914 mm x 2032 mm2'2" x 6'8" 660 mm x 2032 mm 2'8" x 6'8" 812 mm x 2032 mm 3'0" x 7'0" 914 mm x 2134 mm

Custom made frames (non returnable) – consult factory.

Refer to KT Price List for product numbers.

KT25 HKD - 100lb (45 kg) – 2 HANGERSKT28 HKD - 150lb (60 kg) – 2 HANGERSKT40 HKD - 220lb (100 kg) – 2 HANGERS

Hardware Kit included (attached toeach frame)KT25 FRAME HKD w/BOX TRACKKT28 FRAME HKD w/BOX TRACK (HEAVY DUTY)KT40 FRAME HKD w/BOX TRACK (COMMERCIAL)

Half Knock Down Style - Designed for ease ofshipping and to minimize storage requirements.Chance of frame damage during transport is lessened due to compact packaging. Flat jamb,bottom rail and header are strapped to framecage as shown in diagram #1.Diagram #2 shows the 4 components in placebefore assembly which take’s approximately 4 to5 minutes.Frames built for 41/2" (114.3 mm) wall thicknessare designed to hold doors 13/8" (34.9 mm) thick.Frames built for 61/2" (165.1 mm) wall thicknessare designed to hold doors up to 13/4" (44.45 mm)thick.For components diagram see ready made frameon page 27.Rough opening in width is 2 times the door sizeplus 2" (51 mm). Rough opening in height is 4"(102 mm) more than door height. Double pocketdoor frame - 4 times door width, + 2” (50.8 mm).

KT25 FRAME HKD (Refer to page 8 forArchitectural Specifications).Maximum Door Weight - 100 lbs (45 kg) – 2 hangers (KT25 HANGER).Track - KT25 extruded aluminum box track. Forbiparting pocket doors two KT126B intrack doorstops required.

KT28 FRAME HKD (Refer to page 7 forArchitectural Specifications).Maximum Door Weight - 150 lbs (60 kg) – 2 hangers.Track - KT28 extruded aluminum Box Track. Forbiparting pocket doors two KT126B intrack doorstops required.

KT40 FRAME HKD (Refer to page 5 forArchitectural Specifications).Maximum Door Weight - 220 lbs (100 kg) – 2 hangers (KT40 HANGER).Track - KT40 extruded aluminum box track. Forbiparting pocket doors two KT125B intrack doorstops required.

DIAGRAM #1

DIAGRAM #2No Scale

No Scale

HARDWARE KITENCLOSEDREMOVE BOXFROM FRAME

INSTALLATION NOTE FOR POCKET FRAMEREPLACE ALL TRACKSCREWS WITH #8 x 11/2" (38 mm)SCREWS (INCLUDED) AFTERFRAME IS INSTALLED (BEFOREDRYWALL).

R/O


Trac

k an

d H

ard

war

e Sp

ecia

lists


Kri

sTra

ck®

26

ROUGH OPENING IN WIDTH IS 2 TIMES THE DOOR SIZE PLUS 2" (50.8mm). R.O. IN HEIGHT IS 4" (101.6 mm) MORETHAN DOOR HEIGHT.

ROUGH OPENING IN WIDTH IS 4 TIMESTHE DOOR WIDTHPLUS 2" (50.8mm). R.O. IN HEIGHT IS 4" (101.6 mm) MORETHAN DOOR HEIGHT.

FRAME INSTALLED IN ROUGH OPENING.

FRAME INSTALLED IN ROUGH OPENING.

FRAME AND DOOR INSTALLED. READY FOR DRYWALL.

FRAME AND DOORS INSTALLED. READY FOR DRYWALL.

ROUGH OPENING

ROUGH OPENING

DOUBLE FRAME (BIPARTING DOORS)

FINISHED FOR HOME OR OFFICE

POCKET DOOR FRAMES BY KRISTRACKSINGLE FRAME


Trac

k an

d H

ard

war

e Sp

ecia

lists


Kri

sTra

ck®

27KRI STRACK MANUFACTURING LTD. (A D ivis ion o f A.K. Dra ft Seal Ltd.)

KT-FRAME RM SERIESPOCKET DOOR FRAMES (READY MADE STYLE)

SINGLE AND DOUBLE

Standard size frames available in both single and double, for 41/2” (114 mm) and 61/2” (165.1 mm) wall thickness.

1'6" x 6'8" 457 mm x 2032 mm 2'4" x 6'8" 711 mm x 2032 mm 2'10" x 6'8" 863 mm x 2032 mm2'0" x 6'8" 609 mm x 2032 mm 2'6" x 6'8" 762 mm x 2032 mm 3'0" x 6'8" 914 mm x 2032 mm2'2" x 6'8" 660 mm x 2032 mm 2'8" x 6'8" 812 mm x 2032 mm 3'0" x 7'0" 914 mm x 2134 mm

Custom made frames (non returnable) – consult factory.

Refer to KT Price List for product numbers.

Hardware Kit included (attached toeach frame)KT25 FRAME RM w/BOX TRACKKT28 FRAME RM w/BOX TRACK (HEAVY DUTY)KT40 FRAME RM w/BOX TRACK (COMMERCIAL)

Ready Made Style - Is fully assembled forquick and easy installation. Frames built for41/2" (114.3 mm) wall thickness are designedto hold doors 13/8" (34.92 mm) thick. Framesbuilt for 61/2" (165.1 mm) wall thickness aredesigned to hold doors up to 13/4" (44.45 mm)thick.

Rough opening in width is 2 times the doorsize plus 2" (51 mm). Rough opening inheight is 4" (102 mm) more than doorheight. Double pocket door frame - 4 timesdoor width, + 2” (50.8 mm).

KT25 FRAME RM (Refer to page 8 forArchitectural Specifications).Maximum Door Weight - 100 lbs (45 kg) – 2 hangers (KT25 HANGER).Track - KT25 extruded aluminum box track.For biparting pocket doors two KT126Bintrack door stops required.

KT28 FRAME RM (Refer to page 7 forArchitectural Specifications).Maximum Door Weight - 150 lbs (60 kg) – 2 hangers (KT28 HANGER).Track - KT28 extruded aluminum Box Track.For biparting pocket doors two KT126Bintrack door stops required.

KT40 FRAME RM (Refer to page 5 forArchitectural Specifications).Maximum Door Weight - 220 lbs (100 kg) – 2 hangers (KT40 HANGER).Track - KT40 extruded aluminum box track.For biparting pocket doors two KT125Bintrack door stops required.

LENGTH TO SAW CUT ON HEAD SIDESALWAYS 7/8" (22mm) MORE THAN

DOOR WIDTH

BEVELLEDHEAD TRIM ATTACHED

FLAT JAMB1" x 5"

(25mm) x (127mm)

JAMBTRIM

SPREADER

TRACK

STIFFENERS

SAW CUT 5/8" (16mm) DEEP

FOR STIFFENERS

BACK JAMB2 1/8" (54mm)

NET SIZE

SLATS3 1/2" WIDE

(89mm)

RUBBERBUMPER

DOOR GUIDE

ASSEMBLEDHEIGHT

83 3/4" (2127mm)FOR

6 '8" (2032mm) DOOR

(NO SCALE)

No Scale

INSTALLATION NOTE FOR POCKET FRAMESREPLACE ALL TRACK SCREWS WITH #8 x 11/2" (38 mm) SCREWS (INCLUDED) AFTER FRAME IS INSTALLED (BEFORE DRYWALL).

R/O


HEADTOP

HEAD(SIDES)

Trac

k an

d H

ard

war

e Sp

ecia

lists

KT1250 RESIDENTIAL SERIESPOCKET IN A BOX (DELUXE MODEL)

FOR 41/2" (114.3 mm) WALLSTANDARD – MAXIMUM DOOR WEIGHT 100 LBS (45 KG) – 2 HANGERS (AXLE)

(KT1258)-OPTIONAL – MAXIMUM DOOR WEIGHT 150 LBS (60 KG) – 2 HANGERS (BALL BEARING)USING KT28 HANGER. REFER TO PAGE 7.

KT1260 SERIESFOR 61/2" (165 mm) WALL

ARCHITECTURAL SPECIFICATIONS:Maximum Door Weight - 100 lbs (45 kg) – 2 hangers (KT1250) / Optional 150 lbs (60 kg) – 2 hangers (KT1258).Minimum and Maximum Door Thickness - 3/4” (19 mm) to 13/8” (34.9 mm).Door Width - 24” (609 mm) to 48” (1219 mm).Door Height - Up to 96” (2438 mm) provided the door does not exceed 100 lbs (45 kg)

Vertical Adjustment - 3/8” (9.52 mm) for KT1250 AND KT1258 Track - Extruded aluminum, keyhole punched.Hanger - Steel construction zinc plated / 4 plastic wheels. KT1250 Series Axle, KT1258 Series Ball Bearing.Options - KT177 privacy & KT178 passage latch for pocket doors, 5 finishes available.Hardware Packs - Included in box for 1 door application. Comprising of (poly-bagged) KT25 HANGER-2 hangers, KT107B-1 jamb

mounted door guide, KT122B-1 nail on bumper stop, KT157B-1 wrench, KT143B-2 bottom jamb spacer plates,installation sheet plus all screws.

Note: for biparting pocketing doors 2-KT126B intrack door stops required. KT28HANGER included in KT1258 Series Hardware Pack.

For 3'0" (914 mm) doors, header does not need tobe modified. For all other sizes, use the templateon the outside of the carton to determine correctheader length according to door size.Custom finishing trim, flat jamb & stops availablein clear fir, oak, maple. Consult factory.Frame also available for 2 x 6 wall (50.8 mm x152.4 mm).

COMPONENTS LIST

FRAME HARDWARE1 HEAD TOP 1 EXTRUDED ALUMINUM BOX TRACK2 HEAD SIDE 2 HANGERS (4 WHEELS EACH)2 BEVELLED HEAD TRIM 1 JAMB MOUNTED DOOR GUIDE2 SPLIT STUD 1 X 4 1 NAIL ON DOOR BUMPER2 SPLIT JAMB 1 X 3 2 JAMB SPACER PLATES2 SPLIT JAMB TRIM 1 FIXED HEADER END BRACKET4 GALVANIZED STEEL STIFFENERS 1 ADJUSTABLE HEADER END BRACKET1 NAILING SUPPORT BOARD 1 WRENCH, SCREWS AND INSTRUCTIONS

KNOCK DOWN POCKET DOOR FRAME, TRACK AND HARDWARE KITThe width is figured by multiplying the door width by two and add 1" (25.4 mm) (eg 36" x 2 = 72" [914 mm x 2 = 1828 mm];72" + 1" = 73" [1828 mm +25.4 mm] opening). Rough opening in height is 4" (101.6mm) more than door height.

(NO SCALE)

(NO SCALE)

Kri

sTra

ck®

28

KT144B

KT25

KT122B

KT81

KT144B

KT143BKT107B

84" (2134 mm) OPENING FOR 6'8" (2032 mm) DOOR

INSTALLATION NOTE FOR POCKET FRAMESREPLACE ALL TRACK SCREWS WITH #8 x 11/2" (38 mm) SCREWS(INCLUDED) AFTER FRAME IS INSTALLED (BEFORE DRYWALL).

DOOR WIDTH x 2 PLUS 1" (25.4 mm)


Trac

k an

d H

ard

war

e Sp

ecia

lists


for KT1250 Series and 150 lbs (60 kg) for KT1258 Series.

Kri

sTra

ck®

29

CUSTOM FINISHING TRIM, FLAT JAMB AND STOPS AVAILABLE IN CLEAR FIR, OAK, MAPLE, ETC.

KT1080 RESIDENTIAL SERIESPOCKET IN A BOX (ECONOMY MODEL)

FOR 41/2" (114.3 mm) WALLMAXIMUM DOOR WEIGHT 100 LBS (45 KG) – 2 HANGERS

KNOCK DOWN POCKET DOOR FRAME, TRACK AND HARDWARE KIT

Maximum Door Weight - 100 lbs (45 kg)Minimum and Maximum Door Thickness - 3/4” (19 mm) to13/8” (34.9 mm).Vertical Adjustment - 3/8” (9.52 mm).Door Width - 24” (609 mm) to 36” (914 mm).Door Height - Up to 80” (2032 mm).Track - Extruded aluminum, keyhole punched.Hanger - Steel construction zinc plated / 4 plastic wheels.Components List - See diagram.Hardware Packs - Included.The width is figured by multiplying the door width by two

.)gninepo "37 = "1 + "27 ;"27 = 2 x "63 .ge( "1 gnidda dnaRough opening in height is 4" more than door height.

.)mm 3581 = 4.52 + 8281 ;8281 = 2 x 419( )mm6.101(

KT1400 COMMERCIAL SERIES (KT40 TRACK)POCKET IN A BOX (COMMERCIAL MODEL) H.D. BALL BEARING

4 WHEEL HANGERSSTANDARD – MAXIMUM DOOR WEIGHT 220 LBS (100 KG) – 2 HANGERS. FOR 41/2" (114.3 mm) WALL.

KNOCK DOWN POCKET DOOR FRAME, TRACK AND HARDWARE KIT

Maximum Door Weight - 220 lbs (100 kg) KT1400 Series

Minimum and Maximum Door Thickness - 3/4” (19 mm) to13/8” (34.9 mm), up to 2" (51 mm) with modification to header.Vertical Adjustment - 3/4” (19 mm) - KT1400Door Width - 24” (609 mm) to 48” (1219 mm).Door Height - Up to 108” (2743 mm) provided door does notexceed 220 lbs (100 kg) Track - KT40 extruded aluminum, punched.Hanger - Steel construction zinc plated / 4 nylon wheels ballbearing.Components List - See diagram.Hardware Packs - Included. Refer to page 5 for contents ofKT40HDKIT hardware pack. The width is figured by multiplying the door width by twoand adding 1" (25.4 mm) (eg. 36" x 2 = 72"; 72" + 1" = 73" opening). Rough opening in height is 4" more than doorheight. (101.6mm) (914 x 2 = 1828; 1828 + 25.4 = 1853 mm).Note - KT1400 for 41/2" (114.3 mm) wall.

KT1410 for 61/2" (165 mm) wall.

(NO SCALE)

(NO SCALE)

KT144B

KT25

KT122B

KT143BKT107B

KT144B

KT144B

KT122B

KT144B

KT81

KT143BKT107B

Installation Note For Pocket FramesReplace all track screws with #8 x 11/2" (38 mm) screws(included) after frame is installed (before drywall).

R/O

R/O

KT81



Trac

k an

d H

ard

war

e Sp

ecia

lists

TYPICAL DOOR CONFIGURATIONS FOR MULTI SLIDING EXTERIOR POCKET DOORSA second set of panels may be added as screen doors. A third set of panels may be added as louver doors.

The D.W. Floor Track is not a weathertight system. It may be used as an exterior unit when optimum weathering performance is not required

30

Kri

sTra

ck®

KTDW RESIDENTIAL OR COMMERCIAL SERIESTRACK & HARDWARE FOR EXTERIOR MULTI-SLIDING

DOORS & WINDOWS

Kristrack (DW) System

Maximum door weight - 250lbs (113kg) each door (panel)

Maximum door width - 60”(1524mm)

Maximum door height - 144”(3657mm)

Door thickness - 1 3/8" (34.92mm) or 1 3/4" (44.45mm) or2 1/4" (57.15mm)

Maximum number of doors - 4 each way (8) or 4 one way

Note: When usingmaximum door widthand height, door may exceedmaximum door weight.Calculated weightcheck should be done.Using heavier panels(exceeding) 250lbs(113kg) each may beachieved by addingadditional bottomrollers. There are limita-tions to door size whenmaximum weight isexceeded.

Imagine. A opening in your wall without the swinging doors.Your inside becomes the outside in one continuous space. Youcan entertain without interruption and your views become vistas. No fixed glass panels and no mullions or posts. Just wideopen space.

All this is possible today become of the Kristrack® Multi SlidingSystem for Doors and Windows.

The Kristrack® system is designed for sliding doors in exteriorresidential or light commercial applications.

It enables up to 4 doors to slide in both directions of an opening and is suitable for Housing, Apartments, Cafes,Restaurants, Hotels & Shop Fronts.

A typical installation of the Kristrack® system would be glazeddoors sliding open for balcony or patio access.



31

Kri

sTra

ck®


DOORS & WINDOWS

FLOOR TRACK ASSEMBLY

MUD LEVELING

HARD SURFACE FLOOR FINISH APPLICATION

1/2" TRANSITION

REFER TO DETAIL # 8 (SHOWN)HEAD CHANNEL ASSEMBLY

PART # KTDWFT175 SHOWN

REFER TO DETAIL # 1 (SHOWN)FLOOR TRACK ASSEMBLY

OR # 2, # 3 AND # 4 AS REQ.

2 3/8" 2 3/8" 2 3/8"AND # 9 AS REQ. ATWWW.KRISTRACK.COM

DARK BRONZE ANODIZEDALUMINUM HEAD CHANNEL

BED SHOWN

TANDEM DOOR ROLLER

MIN. 1 1/2" THICK SOLID WOOD OR EQ.

GLASSSCREEN SCREEN GLASSEXTERIORINTERIOR

1'-1"TO FACE OF STUD

HEAD

THRESHOLD

2 3/8" 2 3/8" 2 3/8" 2 3/8" 1 3/4"1 3/4"

DW-HC-175

25

TYPICAL HEAD - THRESHOLD CROSS SECTION

NOTE:

THIS DOOR ASSEMBLY USES1 3/4" DOORS, TYPICAL.

NO SCALECopyright 2008 Kristrack Mfg.


32

Kri

sTra

ck®


DOORS & WINDOWSFLOOR TRACK Parts Selection

• Part for fixed door panel.• Fits on floor track profiles: #KTDWFT175,

#KTDWFT125 and cut to fit part #KTDWFT75.

• Part for fixed door panel.• Fits on floor track profiles: #KTDWFT175,

#KTDWFT125 and cut to fit part #KTDWFT75.• Secure with mastic when attaching to track profiles.

FULL SCALE EXCEPT WHEN NOTED

The D.W. Floor Track is not a weathertight system. It may be used as an exterior unit when optimum weathering performance is not required

• Typical application: Mud set stone/tile floor, wood floor on sleepers.• Floor track profile has 2 interlocking grooves w hich allow it to be used

for either 13/8", 13/4" or 21/4" doors.• Floor track can span up to 2'-0" on center.

• Typical application: Thinset stone, tile, wood floor or carpet where a thinner/lower floor finish profile is required.

• Typical application: Dado into wood threshold for carpet or wood floor finishes.

• Alternate application: Dado into countertop ie. pass through window etc.

• Secure with construction mastic or epoxy glue if required.

• Typical application: Stone, tile or wood floor, where a thinner/lower floor finish profile is required.



33

Kri

sTra

ck®


DOORS & WINDOWSHEAD CHANNEL Parts Selection

7/8"

3/8"

included

1 3/

16"

# KTDW-INT

weatherstripBlack pile

Part

3/4"

Part # KTDW-JAMB-INT

ORDER)PART # KTDW123

- Door bumpon. Mount bumpon to pocket closure or door jamb

at center of door panel at mid height of door.

and attach bumpon with pan head screw for 1/8" reveal.One bumpon per door panel.

7/8" Forsner bit into finished wood closure strip or jamb- Visible inset application: Create 1/4" deep mortise using

- Concealed surface mount application: Attach bumponto plywood closure backing with pan head screw.Two bumpons per pocket closure.

- # DW-JAMB-INT is used when pocket opening width- Optional pocket jamb interlock assembly.

KTDW-JAMB-INT

is limited or when the front face of the pocket is theonly way to secure the Interlock.

- Interlock assembly consists of two pieces: # DW-JAMB-INT is used in conjunction

with # DW-INT (one piece).

sed as an exterior unit when optimum weathering performanc ired

Hardware Systems for Exterior Multi Sliding Doors & WindowsKRISTRACK MANUFACTURING

Part # KTDWINT - 1/4" x 1/2" x 2" black

installed at top & bottom neoprene set block

on single side, included.

T

1 3/4" trailing door panel as req.

of part # KTDWINT for complete assembly.- Typical application: Interlock used at all door panel assemblies as occurs.

- Door Interlock.- Interlock assembly consits of 2 pieces (order as 2 pcs)

KRISTRAC FACTURINGHardware Systems for Exterior Multi Sliding Doors & Windows47 Leeder Street, Coquitlam, B.C., V3K 3V5Tel: (604) 520 1080 Fax: (604) 520-3594Website: www.Kristrack.com

ES2

15

PART #KTDWINT (INTERLOCK)

NOSCALE


2 3/8"

1 1/2

"

2 7/8"

1 1

PLAN

SECTION

1 5/8"

1 1/

8"

VIEW

PLAN

SECTION

VIEW

2 1/8"

1 1/

4"

3/8"

11/1

6"

1 3/4"

Stainlesssteel washers

Stainlesssteel washers

Part # DW-

Black pil

Weatherstripincluded

Weatherstripincluded

included


PART #KTDWSBH-SBD(SOLD IN A SET) NO SCALE

STOP BLOCKS


PART #KTDWHC175

34

Kri

sTra

ck®


DOORS & WINDOWSDOOR JAMB PROFILE Parts Selection

1/4"

1/2"3/

4" compress clearancefrom 7/16" to 5/16"

weather fin

PART # KTDWP108-50

PART # KTDWWS32

- Typical application: Dado into bottom of door panel.- Black pile brushseal with weather fin.

Fits into a 1/8" x 5/16" groove which stops 1/4" short ofend of door panel.

3/16

"5/

32"

compress clearancefrom 1/8" to 0"

cont groove in jambor edge of door panel as occurs

1/8"deep x 3/16" wide

PART # KTDWWS32end of door panel.

- Door bu Mount b

- Visible i

3/8"

1/4"

5/8"

compress clearancefrom 5/16" to 3/16"

PART # KTDWP108-35

Fits into a 1/8" x 5/16" cont. groove.

- Black pile brushseal.

where a smaller gap between bottom of door and top- Typical application: Dado into bottom of door panel

of floor finish is desired. Fits into a 1/8" x 5/16" groove

- Alternate application: Dado into 1x pocket closure and into jamb trim at pocket jamb assembly as occurs.

which stops 1/4" short of end of door panel.

PART # KTDW-JAMB-INT

Parts SelectionWeatherseals


PART #KTDWEASYROLL NO SCALE

PART #KTDWEASYROLL

NO SCALE NO SCALE

NO SCALE


NOSCALE


35

Kri

sTra

ck®

INTE

RIO

R

EX

TER

IOR

PO

CK

ET

AS

PO

CK

ET

- JA

MB

CR

OS

S S

EC

TIO

N3

GLA

SS

PA

NE

LS /

3 S

CR

EE

N P

AN

ELS

SH

OW

N

OC

CU

RS

JAM

BA

S

OC

CU

RSNO

TE:

DIA

GR

AM

S B

ELO

W D

EM

ON

STR

ATE

SO

ME

PO

SS

IBLE

EX

AM

PLE

S.

THE

OP

EN

ING

SIZ

E A

ND

PO

CK

ET

RE

QU

IRE

ME

NTS

. SC

HE

MAT

IC

THE

NU

MB

ER

OF

DO

OR

PA

NE

LS M

AY V

AR

Y D

EP

EN

DIN

G O

N

RE

FER

TO

DE

TAIL

ED

DR

AWIN

GS

ON

LIN

E A

T W

WW

.KR

ISTR

AC

K.C

OM

JAM

B -

JAM

B C

RO

SS

SE

CTI

ON

1 G

LAS

S P

AN

EL/

1 G

LAS

S F

IXE

D P

AN

EL/

1 S

CR

EE

N P

AN

EL

SH

OW

N

INTE

RIO

R

EX

TER

IOR

INTE

RIO

R

EX

TER

IOR

PO

CK

ET

- PO

CK

ET C

RO

SS

SE

CTI

ON

3 G

LAS

S P

AN

ELS

/ 3

SC

RE

EN

PA

NE

LS S

HO

WN

PO

CK

ET

AS

O

CC

UR

S

PO

CK

ET

AS

O

CC

UR

S

The

D.W

. Flo

or T

rack

is n

ot a

wea

ther

tight

sys

tem

. It m

ay b

e us

ed a

s an

ext

erio

r uni

t whe

n op

timum

wea

ther

ing

perfo

rman

ce is

not

requ

ired.

DO

OR

PA

NE

L C

ON

DIT

ION

SD

ETA

IL IN

DE

X: A

NO

T TO

SC

ALE

SC

HE

MAT

IC D

IAG

RA

MS


DOORS & WINDOWS



36

Kri

sTra

ck®

KTA6 OPEN RAILThe A6 Open Rail system provides for classic open rail design featuring an exposed bracket mounted

75mm diameter grooved wheel with a precision ground bearing.

Bottom channelgrooved in door

roller guidemounted tofloor.

Floor channelflush withfinished floor.

Roller guidemounted tobottom of door.

Max door weight 300kg (650lb) = 2 carriers

Max door thickness 50mm (2")

Max door height 4000mm (13'1")

Max door width 6000mm (19'8")

KT6CCSCKT6CCTC

Face fix carrier to timber head.Top fix carrier

NOTE:KTA6 OPEN RAIL SOLD AS COMPLETESYSTEM ONLY, TRACK HANGERS,GUIDES OR STOPS

PANEL SIZINGWeight dictates door dimensions, however for panels over 10 ft. (3000mm) wide, use threecarriers for additional lateral support. If using three, adjust the middle carrier high to avoidit bearing any load.

SECURITYFor secure installations, ensure that top and bottom clearances are not sufficient to allowthe door to be lifted off the track.

MATERIALSA6 Track is tailor made with 50 x 6 flat mild steel bar with side fixing holes atapproximately 600mm centres, depending on overall length of track. As standard,Safety Stops are welded to both ends of the track. Tracks are made in one piece upto 158” (4m). For over 158” (4m), track is in two or more pieces and is made with abolted splice / joining bar in the centre of the overall track length.

3 STANDARD LENGTHS AVAILABLEFinished: Satin Chrome with welded stops, spacers & predrilled.

KT6T2SC – 179" (2m)

KT6T3SC – 118" (3m)

KT6T4SC – 158" (4m)

L = track lenth including safety stops

HC - fixing hole centres, maximum 609mmcentres (24”

KT65 Spacer supplied for

NO SCALE

Maximim 158” (4m) one piece. Over 158” (4m) two


Splice/Join is supplied with 2 fixingbolts for tracks over 6000mm.KT6JOINBAR

26

13/8" (35mm)

311/32"(85mm)

3/16" (5mm) 63/8" (162mm)71/2"(190mm)

77/8" (200mm)

15/32" (12mm)

19/32" (15mm)

15/64" (6mm)

111/32"(34mm)

11/32" (26mm)

1211/16"(322mm)15/64"(6mm)

51/4" (133mm)

15/32" (12mm)

15/32" (12mm)

15/64"(6mm)

3/4" (19mm)

311/32"(85mm)

13/8" (35mm)

23/4" (70mm)

(100mm)315/16"

(40mm)19/16"

(40mm)19/16"

315/16" (100mm)

23/4" (70mm)


each hole in track with 10mm x100 hex head coach screw.Track is predrilled

pieces with splice bar

PART PRODUCT PART DESCRIPTION

37

Kri

sTra

ck®

KTA6 OPEN RAIL

KT6CCTC

KT6CCSC

Top Fix Carrier75mm (3") diameterGrooved steel wheel carrierSpecify 2 per door*\*3 carriers for doors 3000mm (10") wide

FINISH - CHROME PLATED

Face Fix Carrier75mm (3") diameterGrooved steel wheel carrierSpecify 2 per door*

*3 carriers for doors 3000mm (10") wide


TOP MOUNT

FACEMOUNT

63/8"(162mm)

1211/16"(322mm)

CARRIERS


KT108B

KT118B

KT21C

KT21D

Universal guideSuits doors 32-54mm (1-1/4" - 2-1/8")No groove required


Stainless steel double roller guidePrecision bearings 22mm (7/8") diameter

Floor ChannelClear Anodized

Floor ChannelBronze Anodized

GUIDES

ROLLER GUIDE

FLOOR CHANNEL


KT6WS

KT6WSC

Door stopUsed to limit door travel in eitherdirectionZinc Plated

Chrome Plated

DOOR STOP

DOOR STOP

Non-grooved door with universal guide

KT108BUG Universal slipper guide

41/2"(114 mm)

4 1/2"(114 mm)

11/32"

3/4"

Side fix carrier, track, welded safety stop, door

stop with buffer, spacer and coach crew

2”

(50.8mm)

KT21 FLOOR CHANNELWITH KT118B DOUBLE ROLLER GUIDE

NO SCALE

NOTE:KTA6 OPEN RAIL SOLD ASCOMPLETE SYSTEM ONLY,TRACK HANGERS, GUIDES ORSTOPS

41/2"(114 mm)

11/16"


SE CT ION T HR OUGH O P E NING(N O S C AL E)

KT116BFOR DOORSUP TO 13/4"

(45mm) THICK

3/16"(5mm)


Track & Hardware SpecialistsKRISTRACK

HEAD OFFICE AND MFG. PLANT – VANCOUVER CANADAE-mail: [email protected]

7470 BULLER AVENUE, BURNABY, B.C., CANADA V5J 4S5 PHONE (604) 451-1080 FAX (604) 451-1140BRANCH DISTRIBUTION CENTRE - Toronto, Ontario, Canada

e2, e3, e4 CATALOGUES AVAILABLE, PLEASE CALLOR

VISIT OUR WEBSITES

www.eclipseArchitectural.com – Hardware Systems for Exterior Folding Doors & Windowswww.kristrack.com – Interior Sliding and Bifold Door Track, Pocket Door Frames, Hardware & Accessories

www.draftseal.com – Weatherstripping, Thresholds, Gasketing, Astragals & Sweeps

(A Division of A.K. Draft Seal Ltd.)

Eclipse Systems

e2 - System for doors - Maximum door weight - 90lbs (40kg) each panel. Maximum door size - 36”x 96”(914mm x 2438mm).



eW - System for windows - Maximum sash weight - 44lbs (20kg) each panel. Maximum sash size - 24”x 60”(609mm x 1524mm).

eRW - System for radius wall - All specifications listed above.

Imagine. An opening in your wall without the sliding doors. Yourinside becomes the outside in one continuous space. You can entertainwithout interruption and your views become vistas. No fixed glasspanels and no mullions or posts. Just wide open space.

All this is possible today because of the revolutionary breakthrough ofthe eclipse weathersealed folding door technology.

ECLIPSE FOLDING DOOR HARDWARE KTA6 OPEN RAIL SYSTEM PAGE 36 & 37

WHAT’S NEW

it’s all about space open up your life

COPYRIGHT CENTOR

Documents

Track & Hardware Specialists