Touring Caravan OWNERS - Elddis€¦ · · 2014-09-22Nose Weight Indicator Jockey Wheel (Option only).....3-1 Loading..... 3-1 Internal Loading & Checks ..... 3-1 External Loading

All the illustrations and descriptive matter in this guide are intended to give a general idea of thecaravan. Changing market and supply situations may prevent the manufacturer from maintainingthe exact specifications and details in this handbook and we therefore reserve the right to alter

specifications and materials as conditions demand.Retailers are independent of the manufacturer and have absolutely no authority to bind the

manufacturer by any express or implied undertaking or representation.

The Explorer Group Limited Delves Lane, Consett, Co. Durham DH8 7PETelephone: 01207 699000 • Facsimile: 01207 699001 • www.explorer-group.co.uk

Issue 5Model Year 2013

OWNERSHANDBOOK

Touring Caravan

CONTENTS-1

CONTENTS

WELCOME AND INTRODUCTION ... 1-1Model Year .............................................................. 1-1Elddis Technical Approvals .................................. 1-1

PREPARING FOR THE ROAD .............. 3-1Caravan Towing Vehicle Weight Ratio ............... 3-1Nose Weight Indicator Jockey Wheel

(Option only) .................................................. 3-1Loading .................................................................... 3-1Internal Loading & Checks ................................. 3-1External Loading & Checks ................................ 3-1Pre-Tow Checklist & Hitch-Up ......................... 3-2Winterhoff Stabiliser - Hitch Head

Operation ....................................................... 3-2Activating the stabiliser ....................................... 3-2Checking the stabiliser ........................................ 3-2Uncoupling ............................................................. 3-3Use of Your Caravans Breakaway Cable ......... 3-3Correct Procedure For Use .............................. 3-3Where a Designated Attachment Point

Is Provided On The Tow Bar ....................... 3-3Where No Designated Attachment Point

Is Provided On The Tow Bar ....................... 3-4Other Means of Attachment .............................. 3-4When The Breakaway Cable Is Attached

Check To Ensure ........................................... 3-4Before Setting Off .................................................. 3-4Handbrake .............................................................. 3-5Cables ...................................................................... 3-5

TOWING AND DRIVING ..................... 4-1Reversing ................................................................ 4-1Speed Limits ........................................................... 4-1Setting Off .............................................................. 4-1Caravan Handling ................................................... 4-1

ARRIVING ON SITE .............................. 5-1Check Site Regulations ........................................ 5-1Selecting a Pitch .................................................... 5-1Side-To-Side Levelling .......................................... 5-1Leveller Jack ........................................................... 5-1Ramp ........................................................................ 5-1Front & Back Levelling ......................................... 5-1Parking on a Reverse-Sloping Site or

Steep Hill ........................................................ 5-2

GETTING STARTED ............................. 6-1Electricity ................................................................ 6-1Power Supply Charger ........................................ 6-112v Systems: .......................................................... 6-1Generator/Charger ............................................... 6-1Electricity Mains Supply ....................................... 6-1

Connecting To Mains Supply OnArrival at Site ................................................. 6-1

Disconnecting Mains Supply WhenLeaving Site .................................................... 6-2

Overseas Electrical Connection ......................... 6-2Gas Supply .............................................................. 6-3Connection ............................................................ 6-3Changing a Gas Cylinder .................................... 6-3Gas Regulator ........................................................ 6-3High Pressure Gas Hoses ................................... 6-3Water System ........................................................ 6-4High Flow Watermaster Pump with

Intelligent Control (IC) ............................... 6-4To prime the Water System ............................... 6-4Maintenance ........................................................... 6-5Helpful Hints .......................................................... 6-5Troubleshooting .................................................... 6-5Diagnostic Codes .................................................. 6-6Winterising ............................................................ 6-6

GAS SAFETY ADVICE ........................... 7-1Facts about LPG.................................................... 7-1Awning Spaces, LPG and Appliance Exhaust ... 7-1LPG Gas System ................................................... 7-1Gas Barbecue Point ............................................... 7-1

ELECTRICAL SYSTEM .......................... 8-112v Power Supply .................................................. 8-1Battery Installation ................................................ 8-1Battery Maintenance ............................................ 8-1Generators / Charger ......................................... 8-1230v Power Supply ................................................ 8-1Mains Unit .............................................................. 8-1Resetting the RCD ................................................ 8-1Automatic Charging System............................... 8-2Maximum Bulb Ratings for Internal Lights ...... 8-2Connecting a Solar Panel

and/or Satellite Dish .................................... 8-2Solar Panel Connection ...................................... 8-2Satellite TC Connection ...................................... 8-212V Fuses - Single Axle & Twin Axle Models .. 8-3

HOW TO USE YOUR CARAVAN’SEQUIPMENT .................................... 9-1

Electrical Control Panels .................................... 9-1Crusader ................................................................. 9-1Cooking equipment .............................................. 9-3Gas Hob ................................................................. 9-3Electric Hotplate ................................................... 9-3Gas Burners ........................................................... 9-4Using the appliance ............................................... 9-4Leaks ......................................................................... 9-4

MY2013/Crusader

CONTENTS-2

CONTENTS

Gas Grill ................................................................. 9-5Gas Oven ............................................................... 9-5Refrigerator Model Thetford N3112E ............. 9-6Operating instructions ........................................ 9-7Sources ................................................................... 9-7Selecting cooling level .......................................... 9-7Use of refrigerator compartment ..................... 9-7While driving ......................................................... 9-8Winter Use ............................................................ 9-8Cleaning .................................................................. 9-8Defrosting .............................................................. 9-8Storage .................................................................... 9-9Troubleshooting .................................................... 9-9Refrigerator Model Dometic RM8501

(In Twin Axle) ............................................... 9-10Operating modes and use of refrigerator .... 9-10Operation ............................................................. 9-10Manual energy selection ................................... 9-11Electronic ignition ............................................... 9-11Setting the cooling compartment

temperature ................................................. 9-11Additional features ............................................. 9-11Door locking ....................................................... 9-12Fixing and releasing the door lock when

parking the vehicle ..................................... 9-12Removable freezer compartment ................... 9-12Positioning the storage racks ........................... 9-12General advice .................................................... 9-13Storing food in the freezer compartment .... 9-13Making ice cubes ................................................. 9-13Defrosting ............................................................ 9-13Switching off refrigerator .................................. 9-14Lighting .................................................................. 9-14Winter operation ............................................... 9-14Troubleshooting 2 .............................................. 9-15Troubleshooting 1 .............................................. 9-15Microwave ............................................................ 9-19Battery Charger .................................................. 9-20Smoke Detector ................................................. 9-20Carbon Monoxide Detector ............................ 9-20Thetford Cassette C260 Toilet ........................ 9-21Parts ...................................................................... 9-21Optional Features ............................................... 9-21Preparing for use (standard) ............................ 9-21Preparing for use with Optional Features .... 9-23Using the toilet (standard) ............................... 9-23Using the toilet with Optional Features ........ 9-23Emptying ............................................................... 9-23Emptying with Optional Features ................... 9-24Cleaning and Maintenance ................................ 9-24Toilet Bowl ........................................................... 9-24Waste Holding Tank ........................................... 9-24

Winter operation ............................................... 9-25Storage .................................................................. 9-25Toilet unit malfunctions ..................................... 9-25Rooflights ............................................................. 9-26The Omnivent (12v) Rooflight ........................ 9-26The Heki 2 Rooflight ......................................... 9-26Standard MPK Rooflight .................................... 9-27Midi Heki Rooflight ............................................ 9-27Windows .............................................................. 9-28Polyplastic Window Opening ........................... 9-28Seitz Window Opening ..................................... 9-28Taps ........................................................................ 9-28Blinds & Flyscreens ............................................. 9-28Flyscreens ............................................................. 9-28Gas Locker Door ............................................... 9-29Internal Doors .................................................... 9-30Magnetic Catches ............................................... 9-30Bed Make-up ........................................................ 9-31Bunk Beds ............................................................ 9-31Front Wrap Round Seating (Option) ............. 9-32Lift Up Bed Extensions (Tempest EB Only) .. 9-32Removable Drawer Locker .............................. 9-32TV Bracket ........................................................... 9-33Avtex LCD Flat Screen TV ............................... 9-33Avtex Aerial ......................................................... 9-33Radio/CD with MP3 Connectivity .................. 9-33Explorer Protect - Autowatch Alarm

System ........................................................... 9-34BPW Intelligent Drive Control (iDc)

System ........................................................... 9-35iDC operating instructions .............................. 9-35

SECURITY ............................................. 10-1Caravan Theft ...................................................... 10-1Robstop WS3000 (Option Only) .................... 10-1Diamond standard Wheel Lock

(Option Only) ............................................. 10-2How to fit your Diamond Standard

Wheel Lock ................................................. 10-2Hints for using the Diamond Standard

Wheel Lock ................................................. 10-2Key Card ............................................................... 10-2CRIS - The Caravan Registration and

Identification Scheme - VIN ...................... 10-3Window Etching & Chassis Marking .............. 10-3Electronic Tagging ............................................... 10-3

CARE OF YOUR CARAVAN ............... 11-1Exterior Cleaning ............................................... 11-1Acrylic Windows ................................................ 11-1Care Instructions for Seitz Windows ............ 11-1Care Instructions for Seitz Rooflights ........... 11-1

CONTENTS-3

CONTENTS

Window Blinds & Flyscreens ........................... 11-1Winterisation/Storage ....................................... 11-1Interior Walls ....................................................... 11-1Furniture ............................................................... 11-1Cooking Equipment ........................................... 11-1Carpets, Upholstery and Curtains .................. 11-2Shower Trays, Shower Room and

Wash Basin Fittings .................................... 11-2Cleaning of all Taps ............................................. 11-2Water Containers .............................................. 11-2Water Systems - Sterilization .......................... 11-3Thetford Toilet ..................................................... 11-3Chassis Mounted Spare Wheel Carrier ......... 11-4Tyres ...................................................................... 11-4Pressures .............................................................. 11-4Tyre Wear and Damage ..................................... 11-4Changing a Wheel ............................................... 11-4Jacking ................................................................... 11-5Lubrication ........................................................... 11-5Maintenance of your BPW Chassis ................ 11-6Procurement of Spare Parts ............................. 11-6Caravan Motor Movers ..................................... 11-6

STORAGE .............................................. 12-1Long Term & Winter Storage ........................... 12-1Caravan Covers .................................................. 12-1Power Drain ........................................................ 12-1

CARAVAN/MOTORHOME WARRANTYCOVER (1ST OWNER ONLY) ..... 13-1

CODE OF PRACTICE .......................... 14-1Mains Electrics ..................................................... 14-1Spare Parts and non warranty work .............. 14-1Remedial Work ................................................... 14-1

CARAVAN CONSTRUCTION- MAIN COMPONENTS ............... 15-1

BPW Chassis ....................................................... 15-1Braking System .................................................... 15-1Solid Construction Body Shell ........................ 15-1Windows .............................................................. 15-1Insulation .............................................................. 15-1Front Panel and Gas Bottle Locker Lid ......... 15-1Awning Channel .................................................. 15-1

EQUIPMENT LIST ............................... 16-1Crusader ............................................................... 16-1

ELECTRICAL DRAWINGS ................. 17-113 Pin Plug Wiring Diagram ............................. 17-1Wiring Diagram - Crusader ............................. 17-2Road Lights - Crusader ..................................... 17-3

GENERAL QUESTIONS ..................... 18-1

GLOSSARY ........................................... 19-1

SERVICE DOCUMENTS ..................... 20-1

NOTIFICATION OF CHANGEOF OWNERSHIP ........................... 21-1

NOTIFICATION OF CHANGE TONAME AND ADDRESS .................. 22-1

INDEX ................................................... 23-1

CONTENTS-4

CONTENTS

1-1

INTRODUCTION

WELCOME ANDINTRODUCTIONCongratulations on choosing an Elddis TouringCaravan.

This Owner’s Handbook has been prepared foryour guidance to help you derive the greatestamount of pleasure from the use of your caravanand your leisure time. We strongly recommendthat you read this guide thoroughly so that youare fully aware of all the caravan’s features,equipment and systems.

Additional information and detailed applianceinstruction manuals are also contained in yourOwner’s Information Pack.

Your new Elddis caravan has been designed as arecreational vehicle and is intended forrecreational use only. It is not intended forbusiness, hire use or for permanent habitation.Elddis accepts no liability if the caravan is used forany purpose other than recreational/holiday use.

Your new Elddis (Crusader) caravan has beenfitted with a GRP underskin to the habitation unitfloor, this reduces weight and provides a waterresistant barrier. This will eliminate the problemof long term water damage and rotten floorunderside.

Your caravan has been designed for towingbehind a normal motor car. Additional careshould be exercised when towing with a 4x4because of the ‘off-road’ nature of the suspension.Owners should not tow their touring caravanswith commercial vehicles. When selecting atowing vehicle it is recommended that youconsult the Caravan Towing Code, which is alsoincluded in your Owner’s Information Pack.

By following the instructions provided in thishandbook and maintaining your caravan in a firstclass roadworthy condition, you are sure to havemany years of carefree use.

To ensure the very best quality and reliability alltouring caravan designs and new developmentsare rigorously tested. Therefore Elddis will acceptno liability or uphold the warranty if the caravanis altered or modified in such a way that wouldadversely affect the reliability.

Please Note: It is a condition of your warrantythat the caravan must have an “annual service”done by an Elddis approved Retailer / ServiceCentre or NCC Approved workshop and arecord is kept. Pages are provided in the back ofthis guide, for your assistance.

Elddis Approved Retailer / Service Centre will beable to supply any replacement parts for yourcaravan, should the need arise, and in most casesany accessories you may require.

Please note: It is not possible to purchasereplacement parts direct from Elddis.

Changing market and supply situations mayprevent us from maintaining the exactspecification details in this guide and we thereforereserve the right to alter specifications asmaterials and conditions demand.

Enjoy your new caravan

Model Year

All Touring caravans manufactured by Elddis aredesignated by their model year. The 2013 modelyear runs from 1st September 2012 to 31stAugust 2013.

Elddis Technical Approvals

All Explorer Group Caravans have beenEuropean Commission Whole Vehicle Typeapproved via the Vehicle Certification Agency(VCA).

In order to ensure your new caravan is safe touse the Explorer Group are members of and havebeen inspected by the following bodies.

National Caravan Council (NCC) who operateda certification scheme to ensure compliance withthe European safety standards for caravans.

National Inspection Council for ElectricalInstallation and Contracting (NICEIC) who carryout an annual inspection of Elddis electricalinstallations within caravans.

Gas Safe Register™ approved installers carry outan annual inspection to ensure that the gasinstallations carried out by Elddis fully complywith all relevant regulations and standards.

Elddis has also obtained ISO9001:2008accreditation and this is audited by SGS UKLimited

1-2

INTRODUCTION

2-1

GENERAL SAFETY

GENERAL SAFETY

Please read before using your new caravan.

In order for you to get the most out of your newElddis caravan it is necessary for you to be awareof the following:

(i) Do not obstruct ventilators and cleanthem regularly, it is advisable to clean andcheck all the ventilators annually forblockages and where necessary rectify anyblockages found.

(ii) Inspect the high pressure flexible gas hose(available from your retailer) regularly fordeterioration and renew as necessary, withapproved type, in any case no later thanthe expiry date stated on the hose.

(iii) Ensure the gas supply and all appliancesare turned off before towing your caravan.

(iv) If your caravan has been fitted with a gasBBQ it must be only used for its intendedpurpose.

(v) Never use portable cooking or heatingequipment inside your caravan. Do not useyour fitted cooking equipment as heatingat any time.

(vi) Never allow modification to your gas orelectrical system unless qualified personscarry them out. All modification to the gassystem should be carried out by a GasSafe Register™I approved gas fitter. Anymodifications carried out on the electricalsystem should be carried out by anelectrician on the roll of the NICEIC or bea member of the ECA.

(vii) In the interest of safety, replacement partsfor an appliance shall conform to theappliance manufacturer’s specifications andshould be fitted by them or an authorisedagent.

(viii) It is recommended that you provide a drypowder fire extinguisher complying withISO 7165 of at least 1KG capacity by theexit door and a fire blanket next to thecooker. Ensure you read the ‘advice tooccupier label’ fitted to your caravanusually found on the inside of thewardrobe door.

(ix) Never exceed your caravans MaximumTechnical Permissible Laden Mass. (seeCaravan Towing Vehicle Weight Ratio)

(x) The laden nose weight for your caravanshould not exceed the lower of thefollowing:

• Towing vehicles maximum nose weight

• Tow bar maximum nose weight

• The caravan’s maximum nose weight.

(xi) Ensure heavy and large items are securedbefore towing your new caravan to reducethe risk of damage being caused while thecaravan is in motion.

(xii) When your caravan is connected to yourtowing vehicle it should be level or slightlynose down. An excessive nose down angleor a nose up angle could lead to instabilitywhen towing.

(xiii) When your caravan is loaded to itsMTPLM and the weight distributed inaccordance with the handbook, yourcaravan is designed to be towed at amaximum speed of 130kmh/80mph.However, your attention is drawn to thefact that in the UK the maximum speedallowed for towing a caravan is 100kmh/60mph.

(xiv) It is illegal to tow your caravan whilstit is occupied.

(xv) If your caravan is fitted with a lift up bunkit is designed for a maximum weight of 11stone and is not suitable for childrenunder 3 years old without supervision.

(xvi) Do not leave children under 14 years ofage unattended in your caravan.

IMPORTANT

Your attention is drawn to the noticeaffixed in the caravan’s wardrobe advisingon fire prevention, ventilation and what todo in case of fire.

2-2

GENERAL SAFETY

VENTILATION

All caravans manufactured by Elddis are ventilatedat both high and low level in accordance withBSEN 721 Safety Ventilation.

High-Level Ventilation

This is always provided by fixed ventilation withinthe fitted roof skylight. All roof skylights fitted byElddis provide fixed free area ventilation. Theseroof skylights should be cleaned annually by useof a small brush to remove any dust that mayhave accumulated around the mesh fitted. Onsome roof skylights the mesh can be easilyremoved to aid cleaning. On fan-assisted roofskylights it is essential that the fan is switched offprior to cleaning.

Low-Level Ventilation

Low-level ventilation is provided under the frontchest of drawers, except in an L shape layout,where it can be found either in the nearside oroffside bed box. The exact position can beidentified via a cover used to prevent theventilation from being obstructed. In order toclean the ventilator, remove the cover by undoingthe two screws and clean using a small brush. It isessential that the cover is replaced once cleaningis complete.

Ventilation in Separate Bedrooms

In caravans with separated sleeping areas,separate ventilation is required and is providedvia a roof skylight at high level and a ventilator atlow level within a bed box or under the fixedbed.

Gas Dispersal Holes

All appliances and gas taps have a gas dispersalhole nearby. It is essential that these are notblocked or made ineffective.

Petrol/Diesel Fumes

The fitting of a tail pipe to your exhaust willreduce the possibility of fumes entering yourcaravan through the front fixed ventilation points.

FIRE SAFETY

Fire Extinguishers

It is recommended that a 1 kg minimum capacitydry powder fire extinguisher be carried insideyour caravan at all times. A fat pan fire must nothave an extinguisher aimed at it, but must besmothered with a fire blanket.

In Case Of Fire

(i) Get everyone out of the caravan as quicklyas possible using whichever exit is quickestincluding windows. Do not stop to collectany personal items.

(ii) Raise the alarm. Call the fire brigade.

(iii) Turn off gas container valve if safe to do so.

Fire Retardant Foams

All caravans are equipped with eitherCombustion Modified High Resilient (C.M.H.R.)foam cushions or sprung mattresses and fireretardent fabric. These foams are very much saferfrom a fire point of view than those previouslyused. In addition all upholstery is made of fireretardant fabric.

2-3

GENERAL SAFETY

YOUR CARAVAN PAYLOAD EXPLAINED

Definitions

Maximum technically permissible ladenmass (MTPLM)

Maximum mass of the vehicle, which takes intoaccount operating conditions including, factorssuch as the strength of materials, loading capacityof the tyres etc.

Mass of the caravan in running order(MIRO)

This is the weight of your caravan as it leaves ourfactory plus the following:

18kgs to allow for the carrying of 2 x 5kgsBP gas light bottles.

9kgs of water in the water heater.

Personal effects payload (PEP)

This is calculated by the following formula:

10L + 10N + 50L is the body length of the caravan in meters.N is the number of berths.50 is for normal equipment carried in thecaravan, a sample list is given below.

TV ........................................................ 3kgsKettle ................................................ 0.5kgsBed linen ............................................. 6kgsCrockery ............................................ 5kgsSaucepans ........................................... 3kgsWastemaster ..................................... 6kgsAquaroll (empty) .............................. 5kgsWaste bin ............................................. 1kgCutlery ................................................ 2kgsToilet fluid etc ................................. 2.5kgsBattery .............................................. 16kgs

Optional equipment payload (OEP)

This is an amount of weight provided by us forfactory fitted options.

Please note: Any options fitted by the retailerwill reduce the overall payload available to thecustomer.

User Payload is the sum of the PEP and the OEP.

2-4

GENERAL SAFETY

3-1

PREPARING FOR THE ROAD

PREPARING FOR THE ROADBefore venturing out on to the road with yourtouring caravan, it is important that you preparecorrectly.

CARAVAN TOWING VEHICLE WEIGHTRATIOThis ratio has a major influence on stability. It isrecommended that:(i) The laden nose weight for your caravan

should not exceed the lower of thefollowing:* Towing vehicles maximum nose weight,* Tow bar maximum nose weight* The caravan’s maximum nose weight,

which is 100/150kgs depending on model.

(ii) The actual laden weight of the caravanshould always be kept as light as possible.The lighter it is whilst being towed on aroad, the safer the outfit combination willbe.

(iii) The Caravan Club recommends a maximumcaravan/towing vehicle weight ratio of (85%for beginners and up to 100% forexperience) of the towing vehicle’s kerbweight providing both are properlymaintained, fully serviceable and the otherrecommendations in this Handbook arefollowed.

(iv) The greater the actual laden weight of thecaravan in relation to the kerb weight of thetowing vehicle the more careful andexperienced the driver needs to be and thelower the speed at which instability couldoccur.

WARNING: It is strongly recommendedthe loaded weight of the caravan does notexceed the kerb weight of the towingvehicle.

NOSE WEIGHT INDICATOR JOCKEYWHEEL (Option only)

This can be used to give guidance on the actualnose weight your caravan is applying to your car’stow ball.

Please note that this should only be used as aguide. For information on how to use the noseweight indicator please go to the section on ‘HowTo Use Your Caravan’s Equipment’.

LOADING

Always lower and secure the jockey wheel andthe four corner steadies (with the braceprovided) before entering the caravan. This willensure that the caravan does not tip up when youare inside.

Please Note: Corner steadies should not beused as a jacking device.

Internal Loading & Checks

When loading your caravan it is advisable to:

(i) Distribute items evenly over the axle and aslow as possible to optimize road holding andachieve the best possible braking effect.

(ii) Do not overload on one side as this willcause the caravan to lean and affect the roadholding and stability.

(iii) Do not stow tins, bottles or heavy items inoverhead lockers when towing.

(iv) Loose articles should be stowed securely toavoid movement and possible damage.

(v) Ensure that all lockers and cupboard doorsare closed and secured.

(vi) Secure all bunks (if appropriate).

(vii) Store the main dining table in its transitposition.

(viii) Set the refrigerator for 12V operation if anyfresh food is stored in it and ensure thedoor is locked.

(ix) Fully close and lock all windows androoflights. Never tow with windows onnight setting.

(x) Leave all curtains and blinds open to preventdamage in transit. If your caravan has a rearwindow this may aid visibility.

External Loading & Checks

(i) Gas cylinders should only be stored,correctly positioned, and secured in the gasbottle locker. The gas should be turned off.

(ii) The leisure battery is stored and secured inthe battery locker box, set into the trayprovided and secured.

3-2


(iii) Any external connections (battery chargers,connecting cables etc), should bedisconnected and stowed.

(iv) Check that all exterior locker doors aresecure and locked.

(v) Secure and lock the main caravan entrancedoor.

PRE-TOW CHECKLIST & HITCH-UP

Having loaded the touring caravan and securedthe lockers and main entrance door:

(i) Check touring caravan wheel bolts aretorque tightened to the required level (SeeIndex - Changing a Wheel).

(ii) Check tyre pressures (Refer to the TechnicalData Sheet) and tyre condition forroadworthiness.

(iii) Ensure the jockey wheel is down, in goodcontact with the ground, clamp tightlysecured, and the caravan handbrake is fullyon.

(iv) Wind up the corner steadies.

(v) Reverse the car close up to the caravan’shitch. It is advisable to seek assistance toguide you so that the car tow ball alignswith the caravan’s hitch. (Use of the caravanhandbrake is advised. Extreme cautionshould be taken if manoeuvring the caravandown hill or on wet, slippery surfaces).

(vi) Make sure the jockey wheel height issufficient for the hitch head to clear thetowing vehicles tow ball.

(v) Manoeuvre the hitch head over the tow balland lower the jockey wheel using thewinding handle, until the hitch head openingsits comfortably over the tow bar ball.

WINTERHOFF STABILISER - HITCHHEAD OPERATION

Coupling

The opened ball coupling is placed over the towball of the towing vehicle. As the coupling load isapplied to the tow ball the coupling willautomatically close, this is indicated when thesecurity lugs become parallel on the side of thehousing. (Fig 3.1)

Activating the stabiliser

The operating handle will not operate until theautomatic closing function has been engaged. Thehandle can now be fully pushed down. The hitchwill remain coupled with the stabiliserdeactivated to facilitate easier manoeuvring.

Checking the stabiliser

With the caravan coupled to your towing vehicleand the stabiliser activated, the condition of thefriction linings can be checked. The wear indicator(as shown in Fig 3.2) is within the top of theoperating handle. The bar graph is marked with(+) and (-) symbols with (+) indicating goodcondition of the pads and (-) indicating that thepads should be checked.

Disengaging the stabiliser

Lift up the operating handle with care to releasethe sprung loaded stabiliser function.

Fig 3-1

Fig 3-2

3-3


Uncoupling

Before uncoupling disconnect the electricalconnections and breakaway cable. Also check thatit is safe to uncouple your caravan taking intoaccount any gradients. With the stabiliser functiondisengaged, simultaneously pull back and lift theoperating handle, this swings the securing lugs outof the locked position allowing the operatinghandle to be lifted into the fully open position.Before operating the jockey wheel, which will liftthe caravan free of the tow ball, check that bothcaravan and towing vehicle handbrakes areapplied!

If the caravan is not to be used for any lengthyperiod of time we recommend the ball coupling iskept in the closed position. This can be doneeasily by pressing the safety ball into the ballspace and slowly closing the operating lever.

Please note: The WS3000 ball coupling can belocked in both the coupled and uncoupledcondition with the ROBSTOP WS3000 hitchlock, however it is recommended that theRobstop is removed for towing.

USE OF YOUR CARAVANSBREAKAWAY CABLE

UK LAW requires that all caravans with brakes(e.g. caravans, horse boxes, car transporters etc),built on or after 1st October 1982, are fitted witha safety device to provide protection in theunlikely event of the separation of the maincoupling while in motion. It’s also a legalrequirement to use the breakaway cablewhenever it’s provided.

The purpose of the breakaway cable is to apply

the caravan’s brakes if it becomes separated fromits towing vehicle. The cable assembly is designedto part, allowing the caravan to come to a haltaway from the towing vehicle.

Construction - Usually a thin steel cable, possiblyplastic coated, and fitted with a means ofattachment to connect to the towing vehicle.

Operation - The cable should be able to pull tightto engage the caravan’s brakes without anyhindrance to its action, if the main coupling of thecaravan separates from the towing vehicle. Itshould never become taut during normal use.

Correct Procedure For Use

(i) Check cable assembly for damage. If indoubt contact your Retailer or ServiceCentre.

(ii) Make sure the cable runs as straight aspossible, and goes through a cable guideunderneath the caravan coupling.

(iii) Determine whether or not you have adesignated attachment point (a feature ofthe tow bar which has been identified by thetow bar supplier as being for the attachmentof a breakaway cable).

Where a Designated Attachment Point IsProvided On The Tow Bar

(i) Pass the cable through attachment point andclip it back on itself (Fig 3-4, Step 1);

or

Fig 3-3

STEP 1

Fig 3-4

3-4


(ii) Attach the clip directly to the attachmentpoint (Fig 3-5, Step 2).

Note: this must be specifically permitted by thecaravan manufacturer’s guidance, as the clip maynot be sufficiently strong.

Where No Designated Attachment Point IsProvided On The Tow Bar

(i) Fixed Ball - Loop the cable around theneck of the tow ball. If you fit the cable likethis use a single loop only (Fig 3-6, Step 3).

(ii) Detachable Ball - You must contact thetow bar supplier for advice.

Other Means of Attachment

Alternatively, it may be possible to attach thecable assembly to a permanent part of the towbar structure with the approval of the tow barsupplier, or to an accessory sold for the purposesof breakaway cable attachment.

When The Breakaway Cable Is AttachedCheck To Ensure

(i) That the cable cannot snag in use on thecaravan hitch, jockey wheel or any

accessories e.g. a stabiliser, bumper shield,cycle carrier etc.

(ii) That there must be sufficient slack in thecable to allow the towing vehicle andcaravan to fully articulate without the cableever becoming taut and applying the brakes.

(iii) That it is not so slack that it can drag on theground. Leave it too loose, and the cablemay scrape along the ground, and beweakened so that it fails before doing itsjob!

BEFORE SETTING OFF

(i) Connect the 13 pin plug on the caravan A-frame to the towing vehicle.

(ii) Check that all tail-lights, brake lights, roadlights and indicators work correctly.

(iii) Ensure that the correct vehicle license /registration plate is attached to the rear ofthe touring caravan.

(iv) Using the jockey wheel lift the tow ballslightly to check hitch is locked onto the ball

(v) Wind up the jockey wheel until the wheelsupports locate into the cut out sections atthe base of the winding section.

(vi) Raise and secure the jockey wheel using theclamp. The jockey wheel should be parallelto the direction of travel at all times.

(vii) Check condition of and secure thebreakaway cable to the tow vehicle.

Fig 3-5

STEP 2

STEP 3

Fig 3-6

3-5


HANDBRAKE

Your caravan is fitted with BPW running gear andhandbrake. It is essential that prior to towing youensure that your handbrake is in the fully offposition. This can be confirmed by ensuring thatthe handbrake arm is resting on the blue stopfitted to the side of the A frame as shown in Fig3-7 below.

CABLES

For peace of mind, you may wish to check theability of the cables to be able to cope withtowing the vehicle at extreme angles beforesetting off. To do so position the vehicle atalternate extreme angles and check that thecables do not pull too tight, are liable to stretchor become unplugged. No cables should beallowed to touch the ground as they will wearand become damaged and ineffective.

Please Note: If having followed this advice, youfeel you cannot achieve a satisfactory cablearrangement, consult your caravan or tow barsupplier or service agent.

Fig 3-7

3-6


4-1

TOWING AND DRIVING

Fig 4-1

TOWING AND DRIVING

REVERSING

It is advisable to have a second person availablewhen reversing the caravan.

Start practising by choosing a left-hand bend forease. Reverse slowly; turning the wheel, initiallythe opposite way to the direction you want thecaravan to go.

Now the front of the caravan is nudged out andis moving the rear in the intended direction. Takecare not to hit the van with the car!

Midways through the manoeuvre, when thecaravan is correctly angled, reduce speed to acrawl and gradually apply opposite lock. Make thecar follow the caravan round then finallystraighten up.

Please Note: Proficiency at reversing can onlybe achieved with practice.

SPEED LIMITS

• Normal road towing: 50mph

• Motorways (including dual carriageways):60mph

SETTING OFF

(i) Let the clutch in smoothly on the towingvehicle. Allow more engine speed toproduce the power to move the additionalweight of the caravan.

(ii) Avoid wear and tear on the clutch andtransmission by taking extra care not to‘ride’ the clutch.

(iii) Change gears smoothly. Try not to jerk theclutch.

CARAVAN HANDLING

(i) Allow for the caravan being wider than thecar. Ensure you have a clear view to therear. This may require the fitting ofextended mirrors for towing your caravan.

(ii) Do not bump the kerb with the caravanwheels.

(iii) When passing other vehicles, allow morethan the normal clearance for driving solo.

(iv) Allow longer to obtain a fast enough speedto pass other vehicles.

(v) Allow for the vehicle being twice its normallength. Do not suddenly swing out.

(vi) Carry out all manoeuvres as smoothly aspossible.

(vii) Use the nearside wing mirror to check thecaravan has clearly passed other road userswhen overtaking and changing lanes.

(viii) Adverse weather conditions may affect thesteering and braking characteristics of yourcaravan.

4-2

TOWING AND DRIVING

5-1

ARRIVING ON SITE

ARRIVING ON SITE

CHECK SITE REGULATIONS

On arrival at a site, you should always check thesite regulations. This will help avoid anyunnecessary conflict with site management andother site users.

WARNING: Care has to be taken toprevent fouling when traversing ramps orother ground obstacles.

SELECTING A PITCH

Carefully select where you wish to place yourcaravan. The site should be as level as possible,preferably not under or near trees, well drainedand away from possible boggy areas. Considerhow you will move the caravan when it is time toleave the site. On sloping ground it is better topitch facing downhill, especially during wetweather.

SIDE-TO-SIDE LEVELLING

A quick glance at your pitch should tell you if youare likely to need side to side levelling i.e. levellingacross the axle. On uneven ground laterallevelling is accomplished by the use of a levellerjack or ramp and a spirit level placed ‘across’ thecaravan floor (not supplied).

Leveller Jack

Place the leveller jack, folded flat, in front of thewheel needed to be raised to level the axle. Towthe caravan onto the leveller jack and adjust theheight until the spirit level shows that the caravanis laterally level.

Ramp

(i) Reverse onto your pitch about 30cm (12")further back than you wish to end up.

(ii) Then place the levelling ramp in front of thewheel that needs to be raised.

(iii) Place a spirit level parallel to the axle on theA-frame or just inside the caravan door.

It helps to have two people at this point. Oneshould drive the car very slowly forward movingthe caravan wheel up the ramp, and the othershould indicate when the spirit level bubble is inthe middle.Whichever method you use, and once level:(i) Apply the caravan handbrake and chock the

caravan wheel if necessary.

(ii) Lower the jockey wheel to ground levelbefore unhitching. (See index uncoupling)

(iii) If necessary use a load spreader, such as abig foot or alternative suitable device.

You should then park your car, usually next to thecaravan furthest away from the door side.

Please Note: On upward facing pitches whenthe hydraulically damped drawbar of the hitchbecomes fully extended, it will be necessary tocompress the drawbar slightly in order to achievea clean’ unhitching. With the caravan brake on,reverse the towing vehicle about 2.54cm (1") torelease hitch lock tension and using the jockeywheel adjustment, unhitch the caravan aspreviously described.

FRONT & BACK LEVELLINGThis should be done only when the laterallevelling is complete.(i) Place the spirit level pointing front to back

just inside the caravan door or on the Aframe.

(ii) Then raise or lower the jockey wheel untilthe caravan is horizontally level.

Please Note: If there is a significant front toback slope, you may need to place a block underthe jockey wheel.(iii) Next, wind down the corner steadies onto

load spreaders (blocks of wood a minimumof 15.25cm (6") square or ‘Big Foot’ steadyattachments) until they are firmly set againstthe ground.

Please Note: It is possible on very uneven sitesthat when fully extended blocks may be requiredunder the corner steadies to achieve this. It isimportant that the caravan is correctly levelled toensure the correct working of the refrigerator,cooker etc.(iv) Now that your caravan is level, place the

caravan step in front of the door ensuringthat it is stable and safe to use.

5-2

ARRIVING ON SITE

PARKING ON A REVERSE-SLOPINGSITE OR STEEP HILLFor successful parking on a reverse slope orsteep hill, the operator need only apply thehandbrake with one hand while gently butpurposely inching the caravan a small distancebackwards with the other.CAUTIONNever enter the caravan without firstlowering the four corner steadies with thebrace provided. Corner steadies should notbe used as a jack. Take care not to lift thecaravan wheels.

6-1

GETTING STARTED

GETTING STARTEDYou have arrived at your destination and nowwant to start to enjoy your new Elddis caravan.The following is a step by step guide toconnecting your services and getting everythingin your caravan working.

ELECTRICITY

Power Supply Charger

Your caravan is fitted with a power supply/charger. This will charge the caravan batterywhen fitted and also power the 12V systems inyour caravan.

It is recommended that you always carry a leisurebattery.

The Charger is fully automatic and will notovercharge the leisure battery.

12v Systems:

Your caravan is fitted with an automatic systemfor selection of power.

When connected to the 230V site supply theautomatic Power Supply/Charger will charge theleisure battery and the 12V systems.

When connected to the car (always disconnect230V supply), the system automatically switchesto the car supply.

When the ignition is switched on the 12V systemin the caravan is automatically switched off, carpower is supplied to the refrigerator and batterycharging is in operation.

GENERATOR/CHARGER

When connecting to a generator, always switchoff the RCD, start the generator and allowrunning for a few minutes to stabilize. When thishas happened, switch the RCD to the ONposition.

ELECTRICITY MAINS SUPPLY

Your caravan’s main electrical installation isdesigned to run on 230V at 50 hertz AC supply.

CONNECTING TO MAINS SUPPLY ONARRIVAL AT SITE

Before connecting the caravan installation to themains supply, check that:

(i) The mains supply is suitable for yourinstallation and appliances, i.e. whether it is

AC or DC and whether it is at the correctvoltage and frequency.

(ii) Your caravan is properly earthed. Neveraccept a supply from a socket outlet or plughaving only two pins, or from a lightingoutlet.

(iii) Any residual current device (earth leakagecircuit breaker) in the mains supply to thecaravan has been tested within the lastmonth. In case of doubt, consult the siteowner or their agent.

(iv) Make sure that the switch at the site supplypoint is off and that all electrical equipmentin the caravan is switched off by ensuringyour caravan mains isolating switch on theMCB is in the ‘OFF’ position.

ELECTRICAL WARNING

Attention: Always disconnect the electricalconnector between the towing vehicle andthe caravan before connecting a mainselectric supply to the caravan and beforecharging the caravan battery by any othermeans.

Once the above checks have been made:

(v) Remove any cover to the electricity inletprovided on the caravan, and insert thefemale connector of the flexible orangesupply cable as shown.

(vi) Locate the site supply and remove any coverfrom the socket outlet provided at thesupply point. Insert the male plug at theother end of the flexible orange supplycable. Switch on the main switch at the sitesupply point (if appropriate).

6-2

GETTING STARTED

(vii) Place any surplus cable under the caravan.Ensure that the surplus cable is not coiledup as it could overheat.

(viii) The MCB main electricity supply switchshould be put in the ‘ON’ position.

(ix) Check the RCD is working by pressing thetest button. Once pressed all electrical lightsand appliances should cease to operate.Reset, and then check the electrical systemis operational.

(x) Finally in order to get your 12V systemoperational, ensure the master 12V switch isin the ‘ON’ position. Refer to index forfurther details on the control panel fitted.

DISCONNECTING MAINS SUPPLYWHEN LEAVING SITE(i) Switch ‘OFF’ at the caravan mains isolating

switch.(ii) Remove the male plug from the site supply.(iii) Disconnect the female plug from the

caravan and store the cable in anappropriate locker.

OVERSEAS ELECTRICAL CONNECTION

Please Note: Connection to a mains voltagesupply OVERSEAS requires particular attention.

Care must be taken when connecting suppliesabroad since the supplies can be of REVERSEPOLARITY.

The significance of REVERSE POLARITY is thatwhen equipment is switched off, it may not beelectrically isolated. The only certain way ofmaking equipment safe is to unplug it.

A means of checking the polarity of the mainssupply when overseas is recommended. There areavailable several proprietary makes of equipmentfor the purpose.

If it can be achieved, it is preferable to connectlive to live, and neutral to neutral to maintain fullelectrical protection.

CHECK all caravan equipment is set-up to acceptthe site supply before actually switching on.

WIRING OF CONNECTING CABLE AND CARAVAN MAINS INLET

WARNING: It is essential that connections are made exactly as shown. If terminalmarkings are not in accordance with the above diagram they must be ignored.

6-3

GETTING STARTED

GAS SUPPLYYour caravan is designed to operate using eitherpropane or butane liquefied petroleum gas at30M/bar. Gas can be obtained from your caravandealer. Your caravan is designed to accept amaximum 2 x 6kg BP Light gas bottles.

ConnectionMake sure that heating and cooking appliancesand gas cylinders are switched off.Each gas appliance is connected to its own gasisolation tap under the cooker. These areidentified on the tap via a label. Below is a key toidentify each label.To operate the tap the arrow on the tap showsthe direction of flow for the gas. The arrowshould be pointing towards the appliance for theappliance to operate. There will be a small labelnext to the bank of taps under the cooker, whichis also reproduced below:

Changing a Gas Cylinder

Before commencing to change a gas cylinder ensurethat the valve on the cylinder is turned fully off. Turnoff all gas operated appliances.

Remove the gas hose from gas cylinder.

Before refitting a gas cylinder, ensure that all gasoperated appliances are turned off - particularly afterwinterisation. Ensure all connections are secure.

WARNING: If cylinders other than thoserecommended are used, ensure that thecylinders are adequately supported, do notblock ventilation openings and cannotcause damage to fixtures and fittingslocated in the compartment.

Gas Regulator

Your new Elddis caravan has been fitted with afully approved gas regulator designed to operateat a gas pressure of 30Mbar. Your regulator isfitted with a test point, which is accessed via theinlet at the side of the regulator. This access pointis only for carrying out gas pressure tests andshould not be used for any other purpose.

CAUTION It is strongly recommended thatonly Gas Safe Register™ approved gas fitterscarry out any work on your caravan gasinstallation.

High Pressure Gas Hoses

You should only connect to this regulator using alength of approved high-pressure hose notexceeding 450mm from the gas cylinder to theregulator. These approved high-pressure hosesare available from your Elddis Retailer. Thesehoses are connected using screw thread fittings,which will make a seal if connected and tightenedusing a spanner. Once the hose is securelyconnected turn on the gas tap above theregulator, then turn on the gas bottle to allow gasto flow into the caravan.

In order to make all your caravan gas appliancesoperational it is necessary to open each appliancegas tap as detailed in previous column. All yourgas appliances should now be operational.Instructions on how to use each appliance aredetailed later in your handbook.

WARNING: Aerosols and highly flammableliquids must not be stored in thecompartment behind, or adjacent to, anygas appliance. Some industrial LPGappliances operate at high pressure andrequire a ‘high pressure’ regulator. Thisoften has an adjusting handle on it. NEVERuse such a regulator on a caravan.

Ventilation holes must be clear at all times.

Water Heater

Space Heater

Refrigerator

Cooking Appliance

Gas On/Off

Hob

6-4

GETTING STARTED

WATER SYSTEM

High Flow Watermaster Pump withIntelligent Control (IC)

The Watermaster IC unit is a yellow box locatedon the back of the Watermaster socket. Itautomatically adjusts your pressure switch so thatsurges or reductions in battery voltage betweensites do not effect your water flow. It will alsoprotect the life of your pump by automaticallyshutting it off if your water container runs dry.

Prior to using your water system for the firsttime, the Watermaster IC unit will need to beprimed and calibrated by following the stepsoutlined below. This procedure should only needto be carried out once.

To prime the Water System

Step 1 - Place pump into a full water container(Fig. 1)

Step 2 - Insert plug into wall socket and close lidto lock plug in place.

Step 3 - Adjust dust cover over opening incontainer (please note dust cover shouldnot be secured to water container as airmust be allowed to enter container toreplace water being pumped out)

Step 4 - Switch on 12 volt supply at main panel(isolator switch) - the pump should startto run

Step 5 - Open one cold tap (eg. kitchen sink)Step 6 - After trapped air has been expelled

water will flow from the open tapStep 7 - When air has been expelled turn off tap,

the pump should turn off afterapproximately 10 seconds.

Fig 2Fig 1

To calibrate the Water System

Step 1 - Press and hold the calibration buttonuntil the green LED starts to flash after1-3 seconds (Fig. 2)

Step 2 - Open the tap and the pump should start(there maybe a short delay)

Step 3 - After approximately 30 seconds, turn offthe tap

Step 4 - After approximately 10 seconds, (thepump should still be running), press thecalibration button again

Step 5 - The LED should turn solid green and thepump will stop after approximately 10seconds. The green LED should turn offand blink briefly every 5 seconds. Thesystem is now calibrated.

The Watermaster IC is now installed and yourwater system is ready for use. In normaloperation the pump may continue to run for upto 15 seconds after the tap is closed.

Instructions for Pump Storage when not inuse

Pump hose can be inserted into groove on plugto keep pump off ground while refilling watercontainer (Fig. 3). The plug should always beremoved before moving the caravan.

When removing plug:

Step 1 - Lift the lid tounlock the plug

Step 2 - Pull out plugfrom socketusing hand grip

Step 3 Shut lid

Fig 3

6-5

GETTING STARTED

Maintenance

The Watermaster IC control unit (located on theback of the socket) is designed to be service freeand does not contain serviceable parts. Pleasenote that the unit is enclosed to protect theelectronics, opening the unit will result in damage,and will invalidate warranty.

A planned maintenance schedule of regularinspection is recommended, for the Watermasterpump kit and socket replacing components asnecessary. Replacement components are availablein service kits from dealers.

For information on replacement parts andservice kits, please visit www.whalepumps.com.

Helpful Hints

Note: If at any stage the user experiences lessthan optimum performance from the WhaleWatermaster IC, recalibrate the system as persteps outlined above.

To obtain efficient running and maximum pumplife, ensure the following:

• There is sufficient water in the container.

• Maximum pumping period is not more than15 minutes.

• All hose connections are firm and water tight

• The power supply is adequate - lowperformance could result from a weakbattery or reduced voltage due toundersized wiring (we recommend wiringshould be a minimum thickness of 2.5mm2)

• When replenishing the water supply, it ispossible to create an air lock in the pump. Asa result, the pump will run noisily and give nodischarge. To remedy, unplug from the socketwhile keeping the pump submerged todislodge the air pocket in the pump. Alsoshaking the dual hose gently may dislodge theair pocket in the pump, or switch off pump atmain panel, open a tap outlet and switchpump on again at the main panel.

Troubleshooting

(a) If the pump will not run:

• Check at least one tap is open

• Turn the pump isolation switch off and on again

• Check the battery condition

• Check the mains isolator switch is on

• Check the pump isolator switch is on

• Check the contacts in the plug and socket are clean and making contact

• Check wiring connections

• Check fuse (see fuse box)

(b) If the pump cylces on/off with all taps and shower closed:

• Check for air or water leaks in taps and piping

• Check that non return valve in socket is free from grit by pushing a suitable blunt object, forexample a ballpoint pen into the socket nipple against the non-return valve holding the valveopen to dislodge trapped grit.

• Recalibrate the system (see calibration section of the installation section)

(c) If pump motor runs steadily and does not stop after 30-40 seconds:

• Check all connections in pipework

• Recalibrate the system

6-6

GETTING STARTED

Diagnostic Codes

To aid with troubleshooting the LED on the back of the Watermaster IC has a number of different flashcodes as described in the table below:

LED State Description

Green Constant On Tap open, pump running

Green Fast Flash (< 1 sec) In Calibration Mode

Green 200ms blink every 5 sec Calibrated and ready for use

Green 200ms blink every 10 sec Un-calibrated

Green 200ms blink every 15 sec Suspended due to dry run need to turn pump switch on andoff

Green 200ms blink every 20 sec Suspended due to low battery voltage, turn pump switch on/off, need to charge battery

Winterising

Watermaster IC does not require any additional winterizing. For details of how to drain your watersystem for winterizing please see www.whalepumps.com/rv.

7-1

GAS SAFETY ADVICE

GAS SAFETY ADVICEIn the event of a suspected gas leak the gas mustbe turned off using the isolation valve on the gasbottle. A competent gas fitter should then checkthe system before it is used/reused.

Regularly check flexible gas hose, joints andconnections for tightness. Finally, make sure thateach gas appliance is working efficiently to therecommendations of the appliancemanufacturers.

See Index - Ventilation

FACTS ABOUT LPG

• LPG is not poisonous.

• Bi-products are harmless.

• LPG is dangerous if all air and oxygen isexcluded.

• LPG has been given a smell by themanufacturers in order to identify leaks.

• The gas is heavier than air and thereforesinks to the lowest point.

AWNING SPACES, LPG ANDAPPLIANCE EXHAUST

There is no danger of pollution of an enclosedawning space from the LPG exhaust from arefrigerator venting into it. Space heaters mayproduce sufficient exhaust to pollute the awningspace, if it is totally enclosed, from a generalcomfort, smell and hygiene point of view. Inextreme cases there could be a build up ofcarbon dioxide to a dangerous level. Caravanowners are advised to allow some fresh aircirculation in the awning space when suchappliances are in use.

Please Note: Ventilation holes must be clear atall times.

LPG GAS SYSTEM

Elddis does not recommend the use of anyexternal cylinders. All cylinders in use should bewithin the gas locker provided. If you wish toutilise a larger cylinder and have this outside thegas locker then the connecting hose must notexceed 750mm.

It is recommended that no flammable material isstored or placed within 300mm of any openflame. Your attention is also drawn to the fact thatthe surface of the Space Heater in your caravan

will get hot when in use. You are advised not touse any additional gas appliances outside yourcaravan unless it is a Gas Barbecue connected viathe Barbecue point supplied with your caravan.

Please ensure that you have read the operatinginstructions for each gas appliance contained inyour Owners Information Pack. Please ensurethat any gas hose left unconnected is protectedfrom dirt or other foreign bodies entering thehose.

GAS BARBECUE POINT

The gas barbecue point is situated on thenearside towards the front. This point is for usewith a gas barbecue only. Simply lift up the flap,unplug the red plastic end cap and connect theappliance in accordance with the gas barbecuemanufacturer’s instructions.

CAUTION: Do not use a gas barbecue insidethe awning. ALWAYS use the appliance in theopen air.

There will be an isolation valve fitted next to theBarbecue point. This is an automatic valve, whichcannot be operated unless a connection has beenmade to the Barbecue point. Do not apply anyforce to this value.

WARNINGS

• Fresh air circulation should be allowedbelow the caravan when appliancesare in use and when flues terminatebelow the floor to allow freeevacuation of the products ofcombustion. At least three sides of theunderfloor space should always bekept open and unobstructed especiallyby snow. Do not make any additionalopenings in the floor.

• Outlet sockets located within thecaravan should only be used with adedicated appliance and not anindependent unit.

• No appliance shall be used outsidewhen connected to an internal outlet.

• Maintain adequate spacing ofcombustible materials from sources ofheat.

• Do not use additional independent gasappliances inside the caravan.

7-2

GAS SAFETY ADVICE

8-1

ELECTRICAL SYSTEM

ELECTRICAL SYSTEM

12v POWER SUPPLY

Battery Installation

Your caravan will be fitted with a BCA Leisurecharging and power distribution unit.

If you wish to install a leisure battery pleaseensure that it is placed on the battery traysupplied with your caravan. Then place the tray inthe battery locker fitted to the side of yourcaravan. Connect the battery to the clamp fittingsconnected to the connection leads within thebattery box.

Elddis recommends that you use sealed for lifeleisure batteries of a minimum rating off 40ampere-hours at 20 hours discharge rate.

Battery Maintenance

Your leisure battery should be maintained inaccordance with the manufacturer’s instructions.For information on the automatic chargingsystem in your caravan please refer to ‘AutomaticCharging System’ in the index.

Do not charge your leisure battery with anycharger other than that supplied. Failure tocomply may cause damage to your battery. If youremove your leisure battery, ensure that it is notplaced on a cold surface as the battery willdeteriorate more rapidly than if stored at asuitable temperature

Generators / Charger

All electrical equipment fitted in your newcaravan can be run from either a controlledgenerator or charger whose output is maintainedbetween 11volts and 14volts.

At least once every 3 years, the caravan electricalinstallation should be inspected and tested, and areport on its condition obtained, as prescribed inBritish Standard BS7671.

230v POWER SUPPLY

Mains Unit

The Mains Unit replaces the conventional fusebox. Similar, but larger ones are often fitted innew houses. The unit, normally located in thefront bed box, gives overloads and earth leakageprotection for the 230V electrical supply in yourcaravan.

For normal operation all switches on the unitneed to be in the ON position. The switches onthe left of the unit are known as MCB’s(miniature circuit breakers). These take the placeof the conventional fuse but are more convenient.In the event of a fault the MCB ‘trips’ i.e.automatically moves to the OFF position. Afterelimination of the fault the MCB can be re-set byswitching to the ON position (against the springpressure in an upwards direction). If an earth faultdevelops, or a person was to touch a live piece ofequipment, the leakage of current to earth shouldimmediately operate the RCD (residual currentdevice) and ‘trip’ the main switch, to the OFFposition. This switch can only be re-set afterelimination of the fault.

Please Note: In case of difficulty, consult anapproved electrical installation contractor (whomay be the local electricity board). It is dangerousto attempt modifications and additions yourself.Lamp holder-plugs (bayonet- cap adaptors) shouldnot be used under any circumstances.

Resetting the RCD

To re-set, operate the switch as for MCB’s.Periodically, the RCD should be checked byoperating the test button marked ‘T’. The unitshould immediately switch to the OFF position. Ifthe unit does not switch off then a qualifiedelectrician should be consulted. If the unit doesswitch off, the test is complete and the switch canbe re-set restoring the supply back to normal.

Please Note: Simultaneous operation of all ofthe 230V mains electrical equipment may not bepossible. A typical UK caravan site mains hook-uppoint provides a maximum output of 10 amps andon some continental sites the available outputmay be as low as 5 amps. If your loading exceedsthe site supply it may trip the site circuit breaker.Please check the available mains output with yoursite operator. The following items need to beadded together if used simultaneously.

230V mains equipment typical consumptionfigures:• Refrigerator ............................................ 0.50 amps• Charger .................................................... 0.50 amps• Water heater ............................................ 3.9 amps• Blown air heaters .................................... 8.5 amps• Colour TV ............................................... 3.33 amps• Microwave ............................................... 4.00 amps• Air conditioning ..................................... 4.00 amps

8-2

ELECTRICAL SYSTEM

AUTOMATIC CHARGING SYSTEM

The battery charger will operate automaticallywhen the caravan is connected to the mainsoutlet on a caravan site. The 12V system, with theexception of the 12V refrigerator and batterycharging, will not operate when the caravan isconnected to the towing vehicle.

CHECK all caravan equipment is set-up to acceptthe site supply before actually switching on.

MAXIMUM BULB RATINGS FORINTERNAL LIGHTS

Type of Light Maximum Bulb Rating

Front locker light ......................................... 20 watts

Downlighters ............................................... 1.2 watts

Reading lights ............................................... 1.2 watts

Floor LED .................................................. 0.36 watts

Under locker strip lights 300mm ............ 1.2 watts

Under locker strip lights 600mm ............ 2.2 watts

Awning lights ................................................ 10 watts

Please Note: Ensure that you only replace ablown bulb with one of the same rating. Neverreplace a bulb with one with a higher rating. Youshould ensure that when fitted, no bulb is incontact with the surface of the lamp or shade.

Connecting a Solar Paneland/or Satellite Dish

Your new Elddis caravan will have both a solarpanel connection point and a satellite TVconnection point within the battery box.

Solar Panel Connection

To connect a solar panel insert the panelconnection lead into the connection point withinthe battery box, please ensure that you have aregulator in line whenever a solar panel isconnected.

Satellite TC Connection

To connect a Satellite TV receiver simply insertthe satellite connection into the connection pointwithin the battery box and this will feed thesatellite signal to the TV outlets within yourcaravan.

8-3

ELECTRICAL SYSTEM

12V FUSES - CRUSADER

8-4

ELECTRICAL SYSTEM

MAINS UNIT - CRUSADER

9-1

HOW TO USE YOUR CARAVAN’S EQUIPMENT

HOW TO USE YOURCARAVAN’S EQUIPMENTCongratulations on your purchase of a new Elddiscaravan. Within this section of your caravan’shandbook we will give you brief details on howto operate all of the caravan’s equipment fromthe gas cooking equipment to the widow blinds.For further details on the major equipmentwithin your caravan please read the individualappliance instructions contained with your userinformation pack.

Please Note: Before attempting to use any gasequipment please ensure that the gas bottle isconnected securely to the caravan’s regulator viaa high pressure gas hose and the bottle valve is inthe ‘on’ position. Also ensure the applianceisolation valves are in the ‘on’ position as shownin the gas system section.

Please Note: Before attempting to use anyelectrical appliance ensure that you haveconnected the mains connection cable to a mainshook up and that the mains isolation switch is inthe ‘on’ position.

ELECTRICAL CONTROL PANELS

Crusader

Your new Crusader Caravan will be fitted withone of the following control panels shownoverleaf.

9-2


(i) To operate the 12V systems for your caravan depress the left rocker switch.

(ii) To operate the pump for your water system depress switch marked with a tap symbol.(iii) When the pump is running the neon light will illuminate.(iv) When the left hand button is depressed the available battery Voltage will be displayed.(v) The right hand button has no function on this control panel.

Water Tank (Option Only)

(i) To operate the 12V systems for your caravan depress the master switch adjacent to the pumpcontrol switches.

(ii) To operate the pump for your water system depress the left hand rocker switch for operation froman external water source. (Aqua roll or Water line).Note: the right hand switch must be in the centre position.

(iii) To fill on the onboard water tank the left hand rocker switch must remain in the on position thendepress the right hand rocker switch to the EXT position. Once the tank is full the pump willautomatically switch off.

(iv) To use water from the on board water tank the left hand switch must remain in the on position thendepress the right hand switch to the INT position.

Digital readout(v) When the left hand button is depressed the available battery voltage will be displayed.(vi) When the right hand button is depressed the available water in the water tank will be displayed

(Note this is to be used as a guide only).

Control panel for caravans without a fixed water tank.

Control panel for caravans with an onboard water tank (Option)

9-3


COOKING EQUIPMENT

WARNINGS

(i) All pans should be mounted centrallyover the burners, even when cooling, toprotect adjacent walls.

(ii) Do not lower the glass cover until hobhas cooled down.

(iii) Glass lids may shatter when heated.Turn off all burners and grill beforeshutting the lid. The glass cover shouldbe raised when operating the grill.

(iv) Accessible parts may be hot when thegrill and oven are in use. Young childrenshould be kept away.

(v) Do not use grill or oven as a spaceheater.

(vi) When you are cooking it is essential toprovide additional ventilation, such asopening windows near grill, cooker andoven.

Gas Hob

USING THE APPLIANCECAUTIONS• Glass lids may shatter when heated.

Turn off all hotplates and allow to coolbefore closing the glass lid.

• Remove all spillage from the surface ofthe glass lid before opening.

• The glass lid has a tendency to snap

4 burner hob

shut towards the end of lowering. Thisis caused by the travel lock action ofthe hinges as it is activated. Make sureall fingers are removed from appliancewhen closing the lid.

• The appliance is not intended for useby young children or infirm personswithout supervision.

• Young children should be supervised toensure that they do not play with theappliance.

Electric Hotplate

Ensure the electricity is switched on.

The hotplate control is numbered from 1 to 6. Toturn it on, rotate the knob either clockwise oranti-clockwise to the required position. Position 1is the coolest setting.

To turn the hotplate off, rotate the knob until theline or pointer on the knob lines up with the zeroon the control panel.

The hotplate is a sealedconstruction and transfers heatthrough conduction. Formaximum efficiency a correctlysized pan with a flat heavy gaugebase should be used. Pan sizeshould be the same or slightlylarger (up to 1”/2.5cm oversize).

Before using your hotplate forthe first time, we recommendthat you prime and then seasonit.

To prime it, switch on thehotplate for a short period,without a pan, to harden andburn off the coating. Use amedium to high setting for 3-5minutes. A non toxic smoke mayoccur during this process. Allowit to cool, then season.

Control panel

9-4


To season, first heat the hotplate for 30 secondson a medium setting, then switch off. Pour aminimal amount of unsalted vegetable oil onto aclean dry cloth or paper towel, and apply a thincoat of oil to the hotplate surface. Wipe off anyexcess oil, then heat the hotplate on a mediumsetting for one minute. Occasional seasoning willhelp to maintain its appearance.

Gas Burners

Ensure the gas cylinder is turned on.

In the event of a gas smell turn off at the cylinderand contact supplier.

Burners - Each burner is controlled individuallyand is monitored by a flame supervision device. Inthe event of the burner flames being accidentallyextinguished, turn off the burner control and donot attempt to re-ignite the burner for at leastone minute.

To light the burner, press in and turn the knobanti-clockwise to the full rate position and apply alight to the burner or press the ignition button iffitted. It is necessary to hold the knob depressedduring ignition and for approximately fifteenseconds after the burner has lit to allow theprobe to reach temperature. Should the flame goout when the knob is released, the procedureshould be repeated holding the knob depressedfor slightly longer.

Using the appliance

For simmering, turn the knob further anti-clockwise to the low rate position.

To turn the burner off, rotate knob fullyclockwise until the line on the knob lines up withthe dot on the control panel.

The burners on this appliance have fixed aerationand no adjustment is required. Depending on thegas being used, the burners should flame asfollows:

Propane - the flames should burn quietlywith a blue/green colour with no sign ofyellow tips.

Butane - Normally on initial lighting, as smallamount of yellow tipping will occur and thenslightly increases as the burner heats up.

Each burner will accommodate pans from 10 to20cm apart from one burner which will accept a22cm pan. For right hand control units this

burner is the rear left, and for the left handcontrol units this burner is the front right.

In all cases, care should be taken not to overloadthe appliance as reduced performance may result.When using small pans, the flame should notspread beyond the base of the pan as this willreduce the efficiency of the burner.

Do’s and Don’ts

DO read the user instructions carefully beforeusing the appliance for the first time.

DO allow the burners to heat before using thefirst time, in order to expel any smells beforethe introduction of food.

DO clean the appliance regularly.

DO remove spills as soon as they occur.

DO check that controls are in the off positionwhen finished.

DO NOT allow children near the appliance whenin use. Turn pan handles away from the frontso that they cannot be caught accidentally.

DO NOT allow fats or oils to build up in thebase of the hotplate.

DO NOT use abrasive cleaners or powders thatwill scratch the surfaces of the hotplate.

DO NOT under any circumstances use theappliance as a space heater.

LEAKS

If a smell of gas becomes apparent, turn off supplyIMMEDIATELY at the cylinder. Extinguish nakedlights including cigarettes and pipes. Do notoperate electrical switches. Open all doors andwindows to disperse any gas escape. Butane/Propane gas is heavier than air; any gas escapingwill therefore collect at low level. The strongunpleasant smell of gas will enable the generalarea of the leak to be detected. Check that thegas is not escaping from an unlit appliance. Nevercheck for leaks with a naked flame; leakinvestigation should be carried out using a leakdetector spray or soapy solution.

9-5


Gas Oven

(i) Turn the gas oven control knob tomaximum then depress the knob whilepressing the electronic ignitor button. If theoven does not light within 20 seconds turnoff the control knob and wait for 30seconds before trying again.

(ii) Once the oven is lit it will be necessary tokeep the control knob depressed for 5 to10 seconds to ensure the flame failuredevice is heated up enough to operate.

Oven control knob

Gas Grill

(i) Turn the grill control knob to the high flameposition and with the knob depressed pressthe electronic ignitor button. If the grill doesnot light within 20 seconds then turn off thegrill control knob for at least 30 secondsbefore trying again.

(ii) Once the grill lights it will be necessary tokeep the grill control knob depressed for 5to 10 seconds to ensure the flame failuredevice is heated enough to operate.

Grill control knob

9-6


REFRIGERATOR MODEL THETFORD N3112E1 Refrigerator door2 Freezer door3 Door lock4 Security lock (dependent on model)5 Control panel LED6 Freezer compartment7 Ice cube tray8 Refrigerator compartment9 Cooling fins10 Storage shelves11 Vegetable bin12 Serial label13 Door bins14 Bottle retainer

Before operating and using this refrigerator weadvise you to read the manual.

For correct and safe use of this refrigerator, youneed to observe several precautions and generalrecommendations. If these instructions have notbeen followed, warranty claims will not beaccepted.

What to do if you smell gas:Directly close the valve of the gas bottle,extinguish any naked flames, do not switch on anyelectrical devices or lighting, open the windowsand leave the room. Then contact the CustomerService Department in your country or holidaylocation.

What to do if you smell a pungent odourfrom the cooling system:Switch off the refrigerator, extinguish any nakedflames, provide sufficient ventilation throughvents, windows and doors. Then contact theCustomer Service Department in your countryor holiday location.

Use of gas

• The refrigerator only runs on liquid gas(propane, butane or a mixture of these). Itdoes not run on natural gas or coal gas.

• Only use gas which is mentioned on theserial label inside the refrigerator.

• It is recommended to use an additional filterwhen operating on Liquefied Petroleum Gas(LPG).

• Make sure the type and position of the gasbottle meets the latest technical regulations.

• Change the gas bottle in open air and out ofreach of any possible source of ignition.

• Never obstruct the ventilation openings inthe gas bottle storage location.

• Keep flammable material away from therefrigerator.

• Do not use gas to power your refrigerator inthe vicinity of petrol stations.

LED Control Panel

5 Control Panel LED 5d Symbol Sources5a On/Off Switch 5e Cooling LevelIndicators5b Confirmation Button 5f Symbol ‘anti-condensation’ (only for fridge freezer)5c Arrow buttons 5g Symbol ‘batteries empty’ (optional extra)

9-7


OPERATING INSTRUCTIONS

To secure optimal performance, level your vehiclebefore operating the refrigerator.

We advise to clean the inside of the refrigeratorproperly before using your refrigerator.

• To switch on the refrigerator, push the on/offswitch and hold it for 1 second. A light in theon/off switch will turn green.

• After 10 seconds the settings will dim. Thegreen light indicates the refrigerator is still infunction.

• To check the settings push the confirmationbutton. The last selected settings will light up.

• For optimal performance, switch on therefrigerator 8 hours before placing food.

• After switching on the refrigerator, push theconfirmation button and hold it for 2seconds. The symbols for the sources light upand start to blink.

• Choose the desired source by pushing thearrow buttons.

• Confirm your choice with the confirmationbutton.

Sources

220V- The refrigerator is powered240V by the mains.

12V The refrigerator is powered by thebattery of your vehicle.

Gas The refrigerator is powered by thegas connection of a gas bottle.

The refrigerator is only operated, when thecontrol panel is powered. A stand-alone model(installed by your dealer) is operational using AAbatteries in the event of no mains or battery.

Open the small coverunderneath the control panel,place 6 new 1.5V AA/LR6batteries as shown.

Always use the gas connection or mains voltageto start up and cool. Operating on 12V is onlyeffective while the engine of the vehicle isrunning.

The performance of the refrigerator, by operationon 12V, is dependent on the thickness and lengthof the wiring and the overall installation of thevehicle.

When selecting gas, the flame should be ignitedwithin 30 seconds. If the system fails, restart therefrigerator and select the gas source again.

From about 1000m above sea level problems of aphysical nature can occur when lighting the gas.This does not mean that the refrigerator is notworking properly.

Selecting cooling level

After switching on the refrigerator, push theconfirmation button and hold it for 2 seconds.

The symbols for the sources start to blink. Pushthe confirmation button again.

The cooling level indicators start to blink. Use thearrow button to choose the desired cooling level.

Confirm your choice with the confirmationbutton.

Your refrigerator meets the climate class SNrequirements according to EN/ISO 7371 at atemperature of 10ºC to 32ºC.

We advise to set the refrigerator on cooling level3, with an ambient temperature between 15ºCand 25ºC. A higher temperature needs a highercooling level, a lower temperature a lower level.

To improve the cooling performance of yourrefrigerator in high temperatures, Thetfordadvises to install the Ventilator Kit. It helps todetract the warm air quicker to the vents. Theventilator kit is suitable for all Thetfordrefrigerators.

Use of refrigerator compartment

Storage shelves and door bins can be moved todifferent heights, make sure the door can still beclosed after reorganising shelves and bins.

Moving storage shelves

Turn the plastic clamp on theright side of the storage shelfupwards, as shown. Lift the rightside a bit, and move the storageshelf to the desired position. Firstplace the left side of the storage

shelf in the refrigerator wall, then the right side inthe corresponding groove. Turn the plastic clampdownwards. Your storage shelf is fixated again.

- +

9-8


Moving door bins

Push a door bin out of thelocking with both hands, asshown. Place this door bin backin the desired position and pushit back on the locking. The doorbin is fixated again.

While driving

In Europe it is only allowed to run yourrefrigerator on gas while driving, if a gas systemwith break protection is installed and localregulations are respected.

Because of varying outside conditions duringdriving, good performance on gas can’t beguaranteed. Therefore Thetford does not adviseto run your refrigerator on gas while driving.

Make sure all products in yourrefrigerator can’t move whiledriving. Secure the bottles in thedoor with the bottle retainerand fixate all food on thestorage shelves.

When you close and press the door of therefrigerator, the door locks automatically. Whiledriving, this door lock also secures the door.

Some models have an extrasecurity lock on the bottom ofthe refrigerator. To be sure thedoor will not open whiledriving, push the black securitylock over the pin on the door.

Never let children play or hide in the refrigerator.Children can be trapped and possibly suffocate.

Winter Use

When you are going to use the refrigerator withan outside temperature below 10ºC, install asuitable winter cover.

The cover will protect your refrigerator againsttoo cold air and makes sure the refrigerator willstill perform optimally.

Make sure you remove the winter cover againonce the temperature is above 10ºC.

Cleaning

It is important to regularly clean the refrigeratorfor optimal performance. Clean the inside with asoft cloth and a a mild household cleaner. Use awet, soft cloth for the outside of the refrigerator.Make sure the vents on the outside of the vehicleare always dust-tight.

Never clean your refrigerator with soap oragressive, caustic or soda-based cleaningagents.

The loose parts of the refrigerator are notsuitable for the dishwasher.

Water through the vents may damage yourrefrigerator. Therefore install winter coversbefore washing your vehicle.

Defrosting

Before defrosting the refrigerator or storing yourvehicle, switch off the refrigerator. Push the on/offswitch and hold it for 2 seconds to switch off therefrigerator. All lights will go out.

A layer of ice on the cooling fins will decrease thecooling capacity and durability of yourrefrigerator. Therefore your refrigerator isprovided with an automatic system, whichprevents ice formation.

Despite this system, it is also possible to manuallydefrost your refrigerator on occasion. Remove allfood, wrap it tightly in newspaper and put it on acold place or in a insulated bag. Then open thedoors. Put dry towels in the refrigerator to catchthe remaining water. When the refrigerator isdefrosted, thoroughly dry the inside.

Do not speed up the defrosting process byremoving the ice layer with force or sharpobjects or by using a hairdryer.

9-9


Troubleshooting

Some problems are indicated through blinking lights on your control panel. First read the instructionsbelow. If this will not solve the problem, contact your dealer or a Thetford Service Centre.

The refrigerator does not work on 230V

• Check if the mains is available.

• Try to run the refrigerator on another power source.

The refrigerator does not work on 12V

• Check if the 12V fuse in the fuse box of your car is still operational.

• Make sure the engine is running.


The refrigerator does not work on gas

• Check if the gas bottle is not empty.

• Check if the valve of the gas bottle and all shut-off valves are open.

• Switch the refrigerator off and on again.


What can I do, when the refrigerator does not start?

• Check if you switched on the refrigerator according to the instructions, if the vehicle stands level orif there is an available energy source to start the refrigerator with. If unsuccessful, please contact yourdealer or a Thetford Service Centre.

The refrigerator does not cool sufficiently, what can I do?

• Check if the vents aren’t covered or blocked from the outside, if the refrigerator stands level, if thehighest cooling level of the refrigerator is selected, if the door of the refrigerator still closes properlyor if there is not too much ice on the fooling fins. If not successful, contact your dealer or Thetford.

All lights on the control panel are blinking, what should I do?

• Contact your dealer or Thetford Service Centre.

I just replaced the batteries, but the batteries empty symbol is already blinking?

• Check if you have used only new 1.5V AA/LR6 batteries. Rechargeable batteries for this function donot work.

Storage

If you do not expect to use your refrigerator fora longer period, it is important to thoroughlyempty, defrost and clean the completerefrigerator. Then install the winter cover overthe vents, to protect your refrigerator duringstorage.

To prevent odours and mould in the refrigerator,keep all doors open during storage.

Rotate the hook at door lock45 degrees and lock it in placeby using the strike plate.

• Make sure the gas taps of the gas bottle areclosed during storage.

• Water through the vents may damage yourrefrigerator. Therefore install winter coversbefore washing your vehicle.

9-10


REFRIGERATOR MODEL DOMETIC RM8501(IN TWIN AXLE)

Manual energy selection/automatic ignition:

Fig 1

A = Power On switch / Energy selector switch (MODE).

B = Temperature selection.

C = Door opening (only when equipped with electrical doorlock).

D = Indicator LED failure.

E = Indicator LED door lock (optional).

F = Indicator LED operating mode.

Cleaning

Before starting up the refrigerator, it is advisableto clean it inside and repeat this at regularintervals. Use a soft cloth and lukewarm waterwith a mild detergent. Then wipe out theappliance with clean water and dry thoroughly.

Note: To avoid deterioration of materials, do notuse soap or hard, abrasive or soda-based cleaningagents. Do not allow the door seal to come intocontact with oil or grease.

Operating modes and use of refrigerator

• This refrigerator is equipped to operate onthree power modes:AC mains power (230V), 12V DC orGas (propane/butane liquid gas).

• Select the desired power mode by theMODE button.

• The cooling unit is silent in operation.

• The refrigerator works reliabily on slopes ofup to 6 deg.

• When the appliance is started for the firsttime, there may be a mild odour which willdisappear after a few hours. Air the livingspace throughly.

• The refrigerator will take several hours toreach its operating temperature in thecooling compartment.

OPERATION

Switch the refrigerator ON or OFF by pressingbutton A for 2 seconds. Button A allows you toeither initiate the requested energy supply oractivate dimming of the LED brightness. Bypushing once, the indicators illuminate for 10seconds. Button C and indicator E are an optionalfeature available with refrigerators equipped withelectrical door locking.

9-11


Manual energy selection

To start the refrigerator, press button A for 2seconds. The LED of the previously selectedoperating mode illuminates: 230V, 12V or GAS.

230V, 12V, GAS

Change the operating mode by pressing button Aagain. The respective indicator LED will illuminate.

CAUTION: The 230V mains voltage energymode should only be selected where theconnected power supply complies with the valuespecified on the rating plate. Any difference invalues may result in damage to the appliance!

CAUTION: In order to prevent discharge ofon-board battery, 12V operation should only beused while the motor is running.

Electronic ignition

1. Press button A several times until indicatorLED (F) illuminates.

2. The ignition process is activatedautomatically by means of an automaticigniter.

Note: The ignition system will make two ignitionattempts with 25 seconds interval when the

burner fails to light. If repeated attempts fail tostart the operation, a fault is indicated (pleaserefer to failure indication).

CAUTION: Always shut and lock therefrigerator before you start your journey.

Setting the cooling compartmenttemperature

Select the desired cooling compartmenttemperature by pressing button B.The LED display of the selected temperaturesetting is illuminated.The scale starts with MIN in the bottom LEDposition (small crystal = highest temperature) andclimbs up to MAX in the upper LED position (bigcrystal = lowest temperature).Note: The temperature levels do not relate toabsolute temperature values.Note: The cooling unit's performance isinfluenced by ambient temperatures. Please selectthe medium setting for ambient temperaturesbetween +15°C and +25°C (refer to Fig 4),temperature level 3). The unit operates within itsoptimum performance range.

Additional features

• The brightness of the display reduces after afew seconds if no other buttons are pressed.

• If the door is open, the interior lighting isswitched off automatically after two minutes.

• Failures are indicated by flashing of the failureindicator LED.

• Should the door be kept open for too long(more than 2 minutes), an acoustic signal isinitiated (pulsing whistle tone).

• Should the electronic control detect anyfailure, an acoustic signal will sound (pulsingwhistle tone). At the same time the displaystarts flashing (see troubleshooting).

Fig 2

Fig 3

Fig 4

9-12


Door locking

Open the door by pressing the locking buttonand pull open (Fig 5).

Shut the door again by pushing it to close. Thelock can be heard snapping into place.

Fixing and releasing the door lock whenparking the vehicle

If the vehicle is parked for a longer period oftime, the locking hook may be clamped by meansof a lockbar. The door may now be opened byjust pulling it without the need to press thelocking button.

Restore the original position by pushing the hookdown.

CAUTION: As a basic rule, shut and lock therefrigerator door before commencing yourjourney.

Removable freezer compartment

To enlarge the cooling space, just remove thefreezer compartment.

Unlock the freezer compartment on both sidesand pull it out.

Store the freezer compartment safely in order toprevent damage.

Positioning the storage racks

The storage racks may be pulled out by smoothlylifting them and may be positioned as desired.

Note: Once the freezer compartment isremoved, an additional storage rack may beinstalled. The storage rack is a piece of extraequipment and may be obtained by Dometic.

Fig 5 Fig 7

Fig 8

Fig 6

9-13


General advice

• Switch the refrigerator on approximately 12hours before filling it.

• Always store pre-cooled foods in therefrigerator. Make sure that the food is wellcooled when it is bought and also whentransporting it. Use insulated cooling bags.

• Open the refrigerator door only for a shortperiod of time when removing goods.

• Foods must be packed - best of all in closedcontainers, wrapped in aluminium foil orsimilar - and stored separately from eachother, in order to prevent drying out orodours.

• Allow foods that have been warmed up tocool down before storing.

• Avoid storing products in the refrigeratorthat could emit volatile flammable gases.

• Do not expose the refrigerator to directsunlight. Please bear in mind that thetemperature inside a closed vehicleincreases sharply if exposed to sunlight andthat this can reduce the efficiency of therefrigerator.

• Ensure that air circulation of the cooling unitis not obstructed. Keep the ventilation grillsfree from obstructions.

Storing food in the freezer compartment

• Do not keep carbonated drinks in thefreezer.

• The freezer compartment is suitable formaking ice cubes and for short-term storageof frozen foods. It is not suitable as a meansof freezing foods.

Warning: When ambient temperaturesare lower than +10°C and the refrigeratoris exposed to these temperatures forextended periods of time, an evenregulation of freezer temperature cannotbe guaranteed for system-related reasons.This can cause the temperature in thefreezer to rise and the stored goods todefrost.

Making ice cubes

Ice cubes are best frozen overnight. At night, therefrigerator has less work to do and the unit hasmore reserves.

Warning: Only use drinking water!

Defrosting

As time goes by, frost builds up on the fins insidethe refrigerator. A layer of frost thicker on oneside may occur and does not represent amalfunction. When this layer of frost is about3mm thick, the refrigerator should be defrosted.• Switch off the refrigerator, as described

further on.• Remove all food and the icecube tray.• Leave the refrigerator door open to allow air

to enter and to prevent formation of mildew.• After defrosting (freezer compartment and

fins free of frost), wipe both coolingcompartments dry with a cloth.

Note: Water thawing in the main compartmentof the refrigerator runs into an appropriatecontainer at the back of the refrigerator. Fromthere, the water evaporates.Warning: The layer of icemust never be removedforcibly, nor maydefrosting be acceleratedusing a heat source.

1. Fill the ice cubes with drinking water.

2. Place the ice cube tray in the freezercompartment.

Fig 9

9-14


Switching off refrigerator

• Press the MODEbutton to switchoff. Keep button(A) pressed fortwo seconds. Thedisplay disappearsand the appliance isfully switched off

• Release the lockingmechanism of thedoor lock bypushing it and shiftit to the front. Ifthe door is shut inthis position, asmall gap isnevertheless keptopen to preventformation ofmildew.

• If the refrigerator isto be taken out ofservice for anextended period oftime, close theonboard shut-off valve and the cylinder valve.

Lighting

If the door is open formore than two minutes,the sensor-controlledinterior lighting isautomatically cut off.

Fig 10

Fig 11

1. Check that the ventilation grills andthe extractor have not been blockedby snow, leaves or similar.

2. When the ambient temperature fallsbelow +8°C, the optional wintercovers should be fitted. This protectsthe unit from excessively cold air.

TIP: It is also recommended that thewinter cover should be used when thevehicle is taken out of service for anextended period of time.

3. Affix the cover and fasten it.

Winter operation

9-15


TROUBLESHOOTING 1

D = LED failure indicatorG = Temperature setting display

TROUBLESHOOTING 2

Before calling the authorised Service Department please check whether:

l The instructions in the section “Using the refrigerator” have been followed.

l The refrigerator is not tilted excessively.

l It is possible to operate the refrigerator with an available power source.

Failure: The refrigerator does not work on gas.

Possible cause Action you can take

a) Gas bottle empty. a) Change gas bottle.

b) Is the supply cut-out b) Open the cut-out device.device open?

c) Air in the gas pipe? c) Switch device off and on again 3-4 times toremove air from the gas pipe.

Status messages on the displayDisplay Failure

LED is blinking* 230V mode: voltage not available or too low.

LED is blinking* 12V mode: voltage not available or too low.

LED is blinking* GAS/Auto mode: flame not ignited.

All temperature setting LEDs Temperature sensor defective, refrigerator worksare blinking* on mid temperature setting.

LED + temperature level

LEDs are blinking* 230V - Heating element defective.

LED + temperature level

LEDs are blinking* 12V - Heating element defective.

* In case of failure, the "failure" indicator LED illuminates in red.

Continued overleaf

9-16


TROUBLESHOOTING 2 (continued)

Failure: The refrigerator does not work on 12V.


a) On-board fuse defective. a) Fit new fuse.

b) On-board battery discharged. b) Check battery, charge it.

c) Engine not running. c) Start engine.

d) Heating element defective d) Inform Dometic Customer Services.

Failure: The refrigerator does not work on 230V.


a) On-board fuse defective. a) Fit new fuse.

b) No connection to supply voltage. b) Establish power connection.

c) Heating element defective c) Inform Dometic Customer Services.

Failure: The refrigerator does not cool sufficiently.


a) Inadequate ventilation to the unit. a) Check that the ventilation grilles are not covered.

b) The thermostat setting is too low. b) Turn the thermostat to a higher setting.

c) There is too much ice on the c) Check that the refrigerator door closescondenser. properly.

d) Too much warm food put inside. d) Let food cool down first.

e) Appliance running for a short time. e) Wait several hours, check again.

f) Ambient temperatures too high. f) Regularly remove ventilation grilles.

9-17


ALDE HEATING (Twin axle models only)

Alde Compact 3010 Control Panel

Pre-operational Check List• Check the level of antifreeze in the header

tank. When cold the fluid should be 10mmabove the minimum mark. If you need to topup your system via the header tank use a 60/40 mix of water and ethylene glycol, this canbe purchased at car accessory outletsnationwide.

• Ensure glycol mixture is at recommendedstrength. It not only prevents freezing but alsostops corrosion and bacteria within the system.Blue antifreeze has a two year life.

• Propane gas is recommended as it works atlower ambient temperatures. Butane losesfunctionality below 10 degrees centigrade. Totalfailure occurs at -2 degrees centigrade whenusing Butane, this applies to all LPG appliances.

• The heating system can be operated with thedomestic water drained down.

• If the vehicle is not in use and there is a risk offreezing the domestic water should be draineddown. Frost damage is not covered underwarranty.

• If leaving the caravan for very long periods oftime without 230V supply disconnect 12Vsupply. The boiler draws a small 0.01 amp instandby mode. The circulation pump draws0.18 amp when operating.

Fault FindingCheck LPG - Sufficient supply? Is the main tapfully open?

If the boiler has not been used for a long periodor gas supply has been changed it may take morethan one attempt to start.Check that the boiler has 12V supply or if usingelectric elements that you have 230V supply.

The boiler is sensitive to current and needs a full12V supply - check battery level.Check all electrical connections are pushed firmlyhome and wires attached.

Tip: Use gas 6kW and electric 3kW combinedfor extra heat and hot water performance.

9-18


Quick Start Operating Instructions

Further information can be found in the appliance handbook.

1. Use the Left < and Right > arrow keys to select the symbol you want.

2. Use the +/On and -/Off keys to turn the function on and off.

Turn boiler

off

Turn boiler

on

Shows

desired

temperature

Hot water

boost

Turn gas

on

1kW or

2kW

Circulation

pump

230V

Supply

OFF

ON

With “OFF” displayed the boiler is shut down

With “ON” displayed the boiler is in “standby”

Select your room temperature

30 mins increased hot water performance - also shuts

down circulation pump

With this symbol shown the boiler will operate using LPG

When on 230V hook up, 1kW or 2kW can be selected

This symbol shows that the circulation pump is operating

This symbol shows that the boiler is receiving 230V

power

9-19


MICROWAVE

Notes:1 - Your microwave is connected to your 230Velectricity supply via a non customer useableplug.2 - Switch on Omnivent to extract when usingmicrowave in cold ambient temperatures.

Controls:

1. Display - Cooking time, power level,indicators and the current time are displayed

2. Auto Cook - Used to cook or reheat manyof your favourite foods.

3. Defrost - Used to defrost foods for time andweight.

4. Power - Used to set power level5. Clock - Used to set clock6. One Touch Cook - Used to cook or reheat

specific quantities of food.7. Time Set Pad - Used to set the cooking time

and the current time.8. Stop/Clear - Used to stop the oven

operation or to delete the cooking data.9. Start/+30 Sec - Used to start the oven and

also used to set a reheat time.

Systems Test

To ensure a fully operational system follow thesesteps:

1. Never operate the Alde boiler withoutensuring the heating system has antifreeze init. Check the header tank - 1cm above “Min”mark when cold.

2. Ensure LPG and 230V connections are inplace - the 230V supply symbol should show.

3. Turn the boiler “ON” via the control panel.

4. Select a room temperature of 29 degrees onthe control panel.

5. Select 3kW - the circulation pump symbolshould now show.

6. Allow the boiler to operate until both flowand return pipes are warm.

7. Select 3kW and turn it off, circulation pumpsymbol should disappear.

8. Select gas and turn it on. Check the flueoutside to ensure boiler is operational,circulation pump symbol should now be on.

9. Your Alde heating is set at 2kW (electric) atthe factory, however should you wish toboost your heating system you can increasethis to 3kW. This should then be reduced to2kW once the desired temperature has beenreached.

9-20


BATTERY CHARGER

The battery charger for the caravan battery willautomatically switch on when the caravan isconnected to a mains supply. The battery chargerwill also provide a 12V supply to the caravanwhen a battery is not connected. Please note thatthe battery charger fitted is designed to keepyour battery charged and is not designed forcharging up a flat battery.

SMOKE DETECTOR

The caravan smoke detector will become activeonce the 9V battery which should be suppliedwith the smoke detector is connected. Thesmoke detector fitted to your caravan has analarm pause mode which will reduce thesensitivity of the alarm for a short period toallow for cooking within the caravan. The alarmpause mode is activated by pressing the buttonmarked HUSH on the smoke detector. While thedetector is in the pause mode the detector willbeep once per minute to alert that the alarmpause mode is activated.

CARBON MONOXIDE DETECTOR

Your FireAngel detector offers many featureswhich set it apart from other CO detectors onthe market today.

Test/Reset button feature

This button will:

• Test the sounder, power pack and circuitry.

• Allows you to test the sensor by introducinga source of CO into the detector.

• Silence the loud 85dB (at 1 metre (3 feet))sounder during an alarm (only for alarms dueto levels of CO of less than 50ppm).

Testing the sounder, power pack andcircuitry

Test the sounder, power pack and circuitry bypressing and releasing the Test/Reset button toconfirm that the detector is operating properly.The sounder should sound as soon as the buttonis pressed, and the Alarm LED will illuminate redindicating that the sounder is working and thepower pack is providing power to the unit. Thistest for the sounder, battery and circuitry shouldbe performed on a weekly basis.

9-21


THETFORD CASSETTE C260 TOILET

Introduction

The Thetford Cassette Toilet is a high qualityproduct. The toilet forms an integral part of yourcaravan or camper bathroom, thanks to itsfunctional design which combines modern stylingand ease of use. The C-260 Cassette Toilet ismanufactured from high quality syntheticmaterials which makes it a durable, user andmaintenance friendly toilet.

The toilet is made up of two parts: a permanentlyfixed part and a Waste Holding Tank that isaccessible from the outside. The removable WasteHolding Tank is located under the toilet bowl andcan be removed via a door on the outside of thecaravan or camper. The Thetford Cassette Toilet isthe solution to the sanitary problem in yourcaravan or camper!

The operating instructions cover ThetfordCassette Toilet models C-260S, C-260CS (modelsconnected to the vehicle’s central water tank)and C-260CWE (model with its own flush-watertank). There are differences in the use of thesemodels. Please ensure that you follow theinstructions that apply to your toilet model.

PARTS

a) Removable Seat and Lid

b) Swivelling Toilet Bowl

c) Blade Handle

d) Flush Button

e) Waste Holding Tank Level Indicator

f) Water Filling Door (only if toilet has ownflush-water tank)

g) Rotating Emptying Spout

h) Automatic Pressure Release Vent

i) Sliding Cover

j) Removable Mechanism

k) Vent Plunger

l) Pull-out Handle

m) Wheels

n) Blade Openener

o) Access Door to Waste Holding Tank

Optional Features

p) Electric Blade

q) Automatic Ventilator

r) Waste Pump-Out System

s) Waste Holding Tank Multi-Level Indicator

t) Flush-Water Tank Level Indicator (only iftoilet has its own flush-water tank)

Note: Optional features can be bought fromThetford dealerships.

Preparing for use (standard)

1. Open the access door on the outside of yourcaravan or camper.

2. Remove the Waste Holding Tank by pullingthe safety catch (which holds the tank inplace) upwards.

3. Pull the Waste Holding Tank outward to thestop. Tip it slightly and take the tank fully out.

4. Place the tank upright and turn the rotatingemptying spout upwards. The emptying spoutensures that the tank can be easily andhygienically emptied.

5. Remove the cap, with the measuring cupinside, from the emptying spout and pour thecorrect dosage of Thetford toilet fluid (seeproduct label) into the holding tank. Thisavoids unpleasant smells and keeps the insideof the tank clean. Next add approximately 2litres of water - enough to ensure that thebottom of the Waste Holding Tank iscovered. Far more information on Thetfordtoilet fluids, see last page of this manual.Screw the cap back onto the emptying spoutand turn back to its original position.

Note: The Emptying Spout Measuring Cap issupplied in the same packaging as this manual.

Caution: Never add toilet fluid directly via theblade or the toilet bowl as this could damage thelip seal of the Waste Holding Tank. Always pourthe fluids via the emptying spout.

6. Slide the Waste Holding Tank back into itsoriginal position via the access door. Makesure that it is secured with the safety catch.Close the access door and lock it. YourThetford toilet is now ready to use.

Caution: Never use force if you cannot get thetank back into place easily. This may cause serious

9-22


Standard Optionalfeatures

Control panel(with optional features)

9-23


damage. If blockage occurs, always check if theblade handle is in the correct (closed) position.

7. For toilets with own Flush-Water Tank: Openthe water filling door and fill the flush-watertank with the correct dosage of Aqua Rinse.This Thetford toilet fluid keeps the flushwater fresh and improves the flushing. Next,fill up the flush-water tank with clean water(approximately 8 litres) using a ferry can orhose. Your toilet is now ready to use.

Preparing for use with Optional Features

8. Automatic Ventilator: Open the access dooron the outside of your caravan and removethe Waste Holding Tank (as described above).

9. Remove the filter housing cover and if nofilter is present, place a new filter into thefilter housing. Peel off the sticker lids on thefilter. Place back the cover of the filterhousing.

Using the toilet (standard)

10. Turn the bowl to the desired position withthe lid closed and using both hands.

11. To activate the control panel, press theflush-button once. The control panel displaywill stay activated for approximately 5minutes. Run some water into the bowl bypressing the flush button again briefly.

12. The toilet may be used with the blade openor closed. To open the blade, slide the bladehandle under the toilet bowl sideways. Afteruse, open the blade (if still closed) and flushthe toilet by pressing the flush button forseveral seconds (if necessary re-activate thecontrol panel). Close the blade after use.

Caution: If your toilet has its own flush-watertank, please make sure that you do not travelwith a flush-water tank that is too full. Do nottravel with water in the toilet bowl. Failure toadhere to this notice may result in water damageto your caravan or motor home.

Using the toilet with Optional Features

13. Electric Blade: Push the electric blade buttonon the control display to electrically open orclose the blade. In the case of failure, you canmanually open or close the blade by slidingthe small handle under the toilet bowlsideways.

14. Automatic Ventilator: The ventilatorautomatically starts when the control panelis activated (by pressing the flush button) andwill automatically shut off after approximately5 minutes. The Automatic Ventilator Indicatorwill flash until automatic shut-off occurs. Ifyou want to stop the ventilator, press theAutomatic Ventilator button. If you want tore-start the ventilator, press the button again(the LED will start flashing again).

15. Flush Water Tank Level Indicator (only fortoilets with own flush-water tank): When theFlush Water Tank Level Indicator lights up,refill the flush-water tank, as only about 1.5litres of water is left in the tank, which issufficient for approximately 2 flushes.

Emptying

The Waste Holding Tank has a capacity of 18litres and requires emptying when the red light(LED) on the toilet control display lights up, whenthe Waste Holding Tank only has capacity forapproximately 2 more litres, which is no morethan two to three further uses.

Make sure that the blade is closed. Open theaccess door located outside the vehicle, pull thesafety catch upwards and remove the WasteHolding Tank.

16. Place the Waste Holding Tank in an uprightposition (Pull-Out Handle at the top, Wheelsat the bottom). Slide the handle sideways - tothe front of the tank - until it snaps out of itslocked position.

17. Pull the handle up and wheel the WasteHolding Tank to an authorized waste disposalpoint.

18. Push the handle back into its locked position.Turn the emptying spout upwards andremove the cap from the spout. Hold theWaste Holding Tank in such a way that duringemptying you can operate the vent plungerwith your thumb. To empty the tank withoutsplashing, depress the vent plunger whileemptying the tank. After emptying, rinse thetank and blade thoroughly with water.

Caution: Do not seriously shake the tank or usehigh pressure water cleaners. This may causedamage to the tank’s interior.

Note: The vent plunger should only be depressed

9-24


once the emptying spout is pointing downwards.Prepare the toilet for re-use if required. Slide theWaste Holding Tank into the toilet and close theaccess door.

Emptying with Optional Features

19. Waste Holding Tank Multi-Level Indicator:The lower lamp indicates that the WasteHolding Tank is almost empty; the middlelamp indicates that it is more than half full;when the upper lamp lights up, the tankneeds emptying as it can only take 2 - 3further uses.

Note: The Waste Holding Tank Level Indicatorwill flash when the holding tank is not present. Inthis case the toilet will not flush.

20. Waste Pump-Out System: When activatingthe control panel this feature automaticallylights up. When the Waste Holding Tank LevelIndicator illuminates, press the WastePump-Out button to pump out the wastefrom the holding tank into the vehicle’swaste tank. The button will flash while thewaste is being pumped and will stopautomatically (after approximately 5 minutes)when all waste has been transferred. If thevehicle’s waste tank is full, the WastePump-Out light will flash rapidly and nopump-out will be possible until the centraltank is emptied. (Check the level of thevehicle’s waste tank on the vehicle’s centralconsole). After the Waste Holding Tank hasbeen emptied, there will be approximately1.5 litres of waste left in the tank. This isnormal. Add 2 litres of water and a correctdosage of Thetford toilet fluids to the WasteHolding Tank.

Caution: It is vital that the correct amount oftoilet fluid is added to ensure the properbreakdown of the waste in the holding tank. Onlyuse the system when the tank is full. Using thesystem too often on an empty tank can causedamage to the pump, which could cause thesystem to fail.

Cleaning and Maintenance

The toilet should be cleaned and maintainedregularly, depending on the amount of use. Toclean Thetford toilets, we advise using water andThetford Bathroom Cleaner.

Caution: Never use bleach, vinegar or otherpowerful household cleaners that contain thesesubstances. These may cause permanent damageto the seals and other toilet components.

Toilet Bowl

- Squirt Thetford Bathroom Cleaner into thetoilet bowl.

- Flush the toilet bowl with water and wipedown the rest of the toilet with a dampcloth.

- Clean seat and lid The seat and lid can easilybe removed: Lift the seat and lid assemblyand pull the round pins (inside the assembly)outwards from the pin holes. After cleaning,replace the seat and lid by positioning theround pins in front of the pin holes and pushthe lid and seat down-ards.

- To keep your flush water fresh and toprevent deposits from forming in your toiletbowl, add a correct dosage of Aqua Rinse inyour flush water tank, if present, on yourtoilet.

Tip! For a really shining toilet, dry with a softdry cloth after cleaning.

Waste Holding Tank

To keep your Waste Holding Tank fresh andclean, Thetford has developed a number ofdifferent toilet fluids. Thetford toilet fluidssuppress smells, reduce formation of gas,promote breakdown of toilet waste and increasethe life span of a mobile toilet. We advise athorough cleaning of the Waste Holding Tankonce each season. Next to using Thetford’sCassette Tank Cleaner, the powerful cleaningagent for the periodical cleaning of the WasteHolding Tank of your toilet, we suggest thefollowing:-

- Remove the removable mechanism fromthe Waste Holding Tank by turning itanti-clockwise and rinse it under a tap.

- Remove the cover plate from theAutomatic Pressure Release Vent by prisingit up using a small screwdriver. Use one handto push the Automatic Pressure Release Ventopen while holding the float of theAutomatic Pressure Release Vent on theinside of the tank with the other hand. Push

9-25


the float upwards, turn it 180 degrees andremove it from below. Remove the rubberseal underneath the float. Rinse the float andrubber seal under a tap. Replace the rubberseal and float for the Automatic PressureRelease Vent using the same method inreverse.

The rubber seals in the toilet (the lip seal, themechanism seal, the automatic pressure releasevent seal and the cap seal) should be regularlycleaned with water and treated with ThetfordHigh Grade Seal Lubricant. This will ensure thatthe seals remain flexible and in good condition. Ifthe toilet is not to be used for any length oftime, it is important to treat the seals withThetford High Grade Seal Lubricant aftercleaning.

Caution: Never use Vaseline or any vegetable oilexcept olive oil. These may cause leakage ormalfunction. The lip seal is a part of the toilet thatis subject to wear. Depending upon the extentand manner of use, the seals will become lesseffective and will need replacing periodically.

Cleaning and Maintenance for OptionalFeatures

- Automatic Ventilation: The filter of theAutomatic Ventilation needs to be renewedperiodically. After approximately 4 full weeksof use, the filter loses its absorption power.

- Pump-Out Waste System: To ensure optimalfunctionality of the Pump-Out Waste System,periodical maintenance of the tube and pumpis recommended. After emptying the WasteHolding Tank completely, fill it with cleanwater and empty it again. This will clean thepump and the hose. Do this once every 3weeks when on holiday. This should ensureproper operation of the system.

Winter operation

You can use your Thetford Cassette Toilet asnormal in cold weather as long as the toilet issituated in a heated location. If there is a risk offreezing we advise that the toilet is drained byfollowing the instructions under ‘Storage’. Forenvironmental reasons the use of antifreeze, suchas that used in car radiators, is notrecommended.

Storage

It is important that you follow the instructionsbelow if you do not expect to use your Thetfordtoilet for a long (winter) period.

- Activate the Control Panel by pressing theflush button. Open the blade and press theflush button until water stops flowing intothe bowl. Close the blade. Open the accessdoor on the outside of your caravan orcamper and empty the Waste Holding Tankat an authorized waste dump. Follow theinstructions for cleaning and maintenance. Toallow the Waste Holding Tank to dry, do notplace the cap back on the emptying spout ofthe tank.

21. If the toilet has its own flush-water tank,place a sufficiently large bowl under thedrain tube to catch the remaining water frm the flush-water tank and remove the drainplug. When no more water exits, put thedrain plug on the drain tube, put it back n its original position and close the access dor. If the toilet is connected to the vehicle’swater tank, please follow your vehicle’s instrutions for draining the central water system. I your toilet is optionally featured with aWaste Pump-Out System, take out theWaste Holding Tank and completely clean i (see Cleaning and Maintenance). After cleaning fill it with water, put it back and empty it va the waste pump-out system. Repeat thistwice.

Toilet unit malfunctions

Contact your dealer or a Thetford ServiceCentre.

We advise draining the fresh water tank prior totravelling. Antifreeze should not be required ifthe motor home is heated. If you do wish to useantifreeze, brands containing the followingproperties may be used in the fresh water tank:

• Ethylene glycol

• Mono-Ethylene glycol• Propane-diol• Glycerol• Ethane-diol• GlycolNever use alcohol based antifreeze, i.e. Methanol,Ethanol, and Iso-propanol.

9-26


ROOFLIGHTS

Your caravan is fitted with at least one type ofthe following roof lights.

The Omnivent (12v) Rooflight

The Omnivent is a double-glazed roof lightconstructed from a synthetic ultra-violetscreened material. Its side-operating mechanismallows a completely free central opening withbuilt-in fixed ventilation when closed. It operatesas an extractor fan and air intake fan.

Please note: Do not change the direction of thefan unless it has been switched off ‘O’ positionand the blades have stopped rotating.

The Heki 2 Rooflight

To open to the tilted position:

(i) Press the knob in the toggle catches oneither side of the rooflight and turn throughapprox. 90°.

(ii) Grasp the metal bar in the middle, snap it outof its holder, swivel down and press therooflight upwards. (The rooflight is held bythe two gas springs after approx. 150mm).

(iii) Swivel the metal bar towards the rooflightand snap into its holder.

(iv) To close the rooflight, proceed with steps (i-iii) in reverse order.

To open in the intermediate position:

(i) Open the toggle catches on either side ofthe rooflight.

(ii) Grasp the metal bar in the middle; snap it outof its holder, swivel down and press therooflight outwards. (Rooflight is openedautomatically after approx. 150mm by thetwo gas springs.)

(iii) Open both fasteners and swivel the metalstrap toward the intermediate position andpull the rooflight down until the metal strapis stopped by the fasteners.

(iv) To close, proceed with steps (i-iii) in reverseorder.

To open in the ventilation position:

(i) Open the toggle catches on either side ofthe rooflight.

(ii) Using both hands on the two toggle catches,press the rooflight up about 2cm and fastenthe toggle catches in the correspondingsetting.

(iii) To close, proceed with steps (i-ii) in reverseorder.

Closing the blinds:

(i) Take hold of the end rod (without rocker) inthe recessed grip and engage in the oppositeend rod (with rocker).

(ii) Select the required position (blackout/flyscreen) by moving both joined end rodstogether.

CAUTION: In extremely bright sunshine, theblackout blind must only be closed two-thirds,and the rooflight must be set in the continuousairing position.

Opening the Blinds:

(i) Move blind (end rod with rocker) right tothe outside.

(ii) Hold the recessed grip with one hand; withthe other hand, press the rocker and movethe blind back (do not let it recoil).

CAUTION

• Do not stand on the acrylic rooflight.

9-27


• Close HEKI 2 completely before moving off.

• Do not leave your caravan when HEKI 2 isopen.

• Please consult your supplying dealer if youhave any problems or defects.

• Remove any snow/ice or dirt before openingthe roof.

• Do not open when it rains or when there isa strong wind.

Standard MPK Rooflight

To open:

(i) Lower the flyscreen then press the blackcontrol rod in towards the centre of therooflight.

(ii) Then while the rods are depressed, pushupwards to open the rooflight.

Midi Heki Rooflight

(i) To open, push the large central button (Fig2).

Fig 1

Fig 2

(ii) Whilst depressed, slide the bar to thedesired position and locate into the stopsprovided (Fig 3).

Fig 3

9-28


BLINDS & FLYSCREENS

Blinds

(i) Pull blind down by its centre catch. Do notpull down by one side of the blind. This willinevitably lead to problems.

(ii) Do not allow blinds to spring back freely.Always control them by hand.

Flyscreens

(i) To operate the flyscreen, either pull thescreen fully down, fully up or across,dependant on type of window fitted, and clipinto place on the blind/frame.

(ii) To release, unclip from the blind/frame. If across bar is fitted, gently pull the crossbardownwards towards you and allow thetension of the spring to roll up the flyscreen.

(iii) Where a crossbar is not fitted, disconnectfrom the blind catch and release gently.

(iv) It is recommended that blinds are not in theclosed position whilst the caravan is moving.

TAPS

Kitchen Taps

Your new caravan will be fitted with a Whalemixer tap.

Operation

For correct operation of the tap, swivel the spoutto the desired position over the sink. Lift thecontrol lever to activate the pump and allowwater to flow simultaneously. To adjust thetemperature, swivel the lever to the left toincrease the temperature and to the right toreduce the temperature.

WARNING: The water temperature couldbe very high so do not lift the lever withthe tap turned to the full left position.

Caution: For winter storage and to prevent frostdamage the tap swivel must be left in the centreup position.

Washroom Taps and Showers

Your caravan will be supplied with either a vanitymixer tap or separate shower mixer, or with acombined mixer tap with retractable showerhead.

WINDOWS

Your caravan will be fitted with either Polyplastic;Seitz framed windows, or a mixture of both.

Polyplastic Window Opening

(i) In order to open the Polyplastic window it isonly necessary to move the catch upwardsand release the catch from the backing plate.

(ii) The Polyplastic window should remain in theopen position once opened, however if itdoes not then tighten the friction control onthe window stays to increase the holdingforce.

(iii) The Polyplastic window is also fitted with anight ventilation position where the catch isset to the centre position on the backingplate; in this position it may be possible forrain to enter the caravan in adverseconditions.

Seitz Window Opening

(i) In order to open the Seitz window you mustdepress the button on the catch beforemoving the catch. Failure to do so will lead tothe catch breaking.

(ii) Seitz windows will automatically stay openonce open due to the built in ratchet withinthe stay.

(iii) In order to close the window it is necessaryto open the window fully then close thewindow in one steady movement beforeclosing the stays when the button shouldclick into the locked position.

Keep button pushed in, then turn handle

9-29


Operation

The mixer tap and shower mixer are operated inthe same manner as the kitchen tap by lifting thecontrol lever to activate the pump and swivellingthe lever left or right to determine thetemperature.

WARNING: The water temperature couldbe very high so do not lift the lever withthe tap turned to the full left position.

Caution: For winter storage and to prevent frostdamage the tap swivel must be left in the centreup position.

Kitchen Tap

Shower Mixer Tap

Washroom Tap

GAS LOCKER DOOR

All caravan models are fitted with a gas strutsupported door which will remain in the openposition without the need for a holding bracket.This door will remain open unless locked by thekey.

Please Note: It is important when raising yourgas locker door that you do not push the doorpast the vertical position as this could damage thehinges. Also care should be taken when leavingthe door in the open position to ensure that anywind cannot catch the door and push it openbeyond the vertical position.

9-30


MAGNETIC CATCHES

Magnetic catches workon contact with themetal plate on the rearof the door. Simplyclose the door untilthe magnet engagesand holds the metalplate. Pulling the doortowards you with amoderate force will besufficient to disengagethe magnetic catch andopen the door.

SPRUNG HINGES

Overhead lockers will use sprung hinges. Theseare suitably strong enough when closed tosecurely retain the door and prevent it fromopening in transit. Pulling the handle towards youwith moderate force is sufficient to open thelocker door and hold it in the open position.

SLIDING DOORS

The room divider should be held in place duringtransit by the use of the strap with the studfastening. When stationary, the room divider canbe held shut by contact between a metal plateand magnet.

INTERNAL DOORS

Toilet/Shower Room Doors

Toilet/shower room doors are fitted with a leverlock, which is operated by pushing the leverdown. The lever is spring-loaded and will returnto the closed position upon release. It isrecommend that the lever is always used whenclosing the door.

OTHER INTERNAL DOORS

Other internal doors such as the wardrobe andtable storage locker are fitted with a 2-positionbutton lock. Push the button to lock the doorand the button should remain flush with the door.Push the button again to release and the buttonshould then protrude from the door surface.

Toilet/Shower Room Doors

Other Internal Doors

9-31


BED MAKE-UP

Parallel Lounge

The two single beds can be easily converted intoa double bed by pulling out the bed slats, storedbeneath the chest of drawers or stored in thebed slat box at the front/end of the caravan.Arrange seat cushions appropriately.

1

2

3

4

5

Bunk Beds

All high level beds will take a maximum weight of75kgs / 11 stone. When in use, the high level bedsmust have the bunk safety boards in place asshown in the diagram. Touring caravans aremanufactured with a lightweight construction andtherefore the beds are not designed to be knelt,sat or stood upon without all the bed cushions inplace.

1

2

3

4

9-32


LIFT UP BED EXTENSIONS (TEMPESTEB ONLY)

The centre dinette bed has lift up extensions andthese are operated by depressing the leverbehind the flap of the hinge. While pressing thelever the extension flap can then be lifted intoplace.

This lever must also be depressed in order tolower the flap.

REMOVABLE DRAWER LOCKER

To remove from the caravan, first locate the tworetaining straps at the bottom rear of the unit,the straps are released by pulling away and downthis releases the thumb catches. The locker cannow be removed for storage.

To secure the unit into the caravan, first place thelocker into position, then feed the straps thoughthe thumb locks, holding the strap taut push thethumb lock so that is closes on the strap.

FRONT WRAP ROUND SEATING(Option)

If you have purchased the wrap round seatingoption for your new caravan please note that thecentre seat can be extended by the use of thelocking mechanism which can be found under thisseat.

Pull the slats forward then turn the locking plateto be in the direction down the caravan (see fig1) in order to secure the front seat in place.

This will prevent the slats from going back intothe front seat and increase the seated area.

Please ensure you return the locking plate to itsnormal position (see fig 2) if you wish to removethe wrap round seating.

Fig 1

Fig 2

9-33


AVTEX LCD FLAT SCREEN TV

Your caravan is provided with a Avtex LCD flatscreen TV and full details of its operation can befound in the User Information Pack.

AVTEX AERIAL

A omnidirectional high gain TV aerial is providedand can receive Digital TV signal, AM and FMradio signals and can run up to 3 TV outlet at anyone time.

Radio/CD with MP3 Connectivity

Details on how to set up and use the Radio/CDwill be contained in your document wallet.

Locked

Open

TV BRACKET

It is important that you ensure that the TVbracket is secured before towing. It isrecommended that the TV is removed and storedwhilst in transit.

9-34


Emergency Disarm

Insert the touch-key briefly into the socket. Thealarm will turn off.

Silent Arm and Disarm

(i) Press the small button briefly followed by apress on the arm/disarm button.

(ii) The alarm will arm/disarm without chirps.

Sensors

Each caravan alarm is installed with a PassiveInfrared Detector (PIR) and a leg sensor.Additional sensors can be purchased from yourdealer to enhance security.

Passive Infra Red Sensor

The wireless PIR sensor will detect movement inthe caravan and transmit a radio signal to thealarm module, if the alarm is on the siren willsound.

Leg Sensor

The leg sensor will detect the corner stabilisingleg being raised or lowered and transmit a radiosignal to the alarm. The leg sensor is fully sealedagainst dust and water and has a battery lifeexpectancy of three years. When the batterybecomes exhausted, the sensor will need to bereplaced.

Enhanced Features Arming The System In“At Home” Mode

In the ‘at home’ mode, any sensor that isprogrammed to be isolated, such as the PIRsensor will not trigger the alarm. Other sensors,such as the leg sensor, will trigger the siren. Armas normal followed by a second press on thearm/disarm button within 2 seconds. Normal“on” tone followed by “at home” tone indicatingisolation is active. Settling time of 15 secondsbefore responding to triggers. Armed in theisolation mode will be indicated by a double flashintermittently of the LED. The “at home” sensorswill be isolated; other sensors will trigger thesiren for 30 seconds.

Arming the System in Test Or Buzz Mode

In the buzz mode the siren will sound a shorttone when a sensor is triggered instead ofsounding for 30 seconds. It is advisable to test allthe sensors

EXPLORER PROTECT - AUTOWATCHALARM SYSTEM

The Explorer Protect system is fitted as standardon the Crusader range. Manufactured byAutowatch, The Explorer Protect system isdesigned to give years of trouble free operation.Made with only the highest quality componentsand using state of the art technology you can beassured that your caravan has the best electronicprotection available.

Each caravan alarm is installed with a PassiveInfrared Detector (PIR), a sensor that detectsmovement in the caravan and transmits a radiosignal to the alarm module. If the alarm is on thesiren will sound. A leg sensor, fully sealed againstdust and water, will detect if the corner stabilisingleg is being raised or lowered and transmits acoded radio signal to the alarm.

Additional sensors can be purchased from yourretailer to enhance security.

See section below for operation or consult themanufacturers instructions provided in theOwners Information Pack.

Basic Operation Arming the System

(i) Briefly press (large) arm/disarm button.

(ii) Single chirp.

(iii) Awning light illuminates for 30 seconds.

(iv) Settling time of 15 seconds beforeresponding to triggers.

(v) Single intermittent flash of status LED (every2 seconds).

(vi) All sensors triggered will result in sirensounding for 30 seconds, or until reset bypressing the arm/disarm button.

Disarming the System

(i) Briefly press the (large) arm/disarm button.

(ii) Double chirp.(iii) Awning light illuminates briefly on and off and

then on again for 30 seconds.(iv) LED off.

Panic Alarm

(i) Press and hold the small panic button on thetransmitter for two seconds.

(ii) The siren will sound for thirty seconds,unless reset by pressing any of thetransmitter buttons.

9-35


BPW INTELLIGENT DRIVE CONTROL(IDC) SYSTEM

Your new Crusader caravan has the BPWIntelligent Drive Control fitted as standard. Belowis a brief explanation on how to ensure it isworking correctly, full details of this system andmaintenance instruction are provided within theiDC documention provided within your userhandbook pack.

iDC operating instructions

Checks prior to any towing:

• Tyre pressure/tyre condition.

• Wheel mounting.

• Operation of the lighting and brake system.

• Pull up and fasten jockey wheel. The jockeywheel should always be positioned parallel tothe driving direction.

• Check coupling. The ball-shaped couplingmust enclose the ball completely and firmly.

• Fasten the break-away cable at the vehicle.

• Release parking brake.

Prior to towing:

• Couple caravan.

• Insert 13-pole connector.

• Check caravan lights.

• Check status indicator (LED) of the iDC.

When connecting with the continuous positiveelectricity of the battery, the iDC effects a self-test. During the performance test, the brakelinkage of the trailer will be actuated, which willresult in enormous forces at the moving parts.Observe that neither objects nor parts of thebody are within the working area during thisprocess.

After the self-test the status LED must beilluminated green. If this is not the case, seechapter “A-2 LED Flashing Code within the BPWdocumentation”.

Proper operation of the iDC might be affected.But the vehicle can be moved further.

The self-test cannot be executed perfectly ordoes not give a correct message in the followingsituations:

• After long stop periods.

• Brake in automatic reverse gear mode -move the vehicle for some meters in drivingdirection.

The self-test must be finished prior to driving.

For new vehicles - after your first trip:

• Check wheel bolts for tightness using atorque wrench. Always check the wheel boltsafter each tyre change.

• Recommendation: Check the brake systemafter approx. 500 km and readjust it, ifrequired.

9-36


10-1

SECURITY

SECURITYTheft deterrent, prevention and security of yourtouring caravan is taken very seriously at Elddis.That is why we have provided a combination ofstandard features and optional extras designed todeter and prevent thieves from stealing yourproperty. And in the unlikely event that theyshould succeed, aid the identification, speedyrecovery of your property and assist in theprosecution of the thief.

Caravan Theft

The theft of a caravan can occur in the mostunlikely circumstances; from a motorway servicearea, even from an owner’s driveway. Secure allwindows and doors when your caravan isunoccupied, even if only for a short length of time.

ROBSTOP WS3000 (Option Only)

The Robstop WS3000 hitchlock is made of high-grade steel alloy with a cylinder lock. It is verysimple to operate and prevents unauthorisedcoupling and disconnection. It also preventsdismantling of the coupling itself. The safety ballcovers the ball head room of the WS3000creating an additional means of protection(available as an optional extra or from yourretailer).

10-2

SECURITY

DIAMOND STANDARD WHEEL LOCK(Option Only)

How to fit your Diamond Standard WheelLock

1. The Diamond Standard Wheel Lock can onlybe fitted to the nearside wheels.

2. Move the caravan until the receiver is locatedbetween the wheel spokes (Fig 1).

3. Push the Diamond Standard Wheel Lockbetween the rim spaces so that the bolt fitsinto the receiver (Fig 2).

4. Push the Diamond Standard Wheel Lock upto the point where the base plate contactsthe rim (Fig 3).

5. Lock the Diamond Standard Wheel Lockwith the attached key (Fig 4).

Hints for using the Diamond StandardWheel Lock

To keep the hole of the receiver clean, please usethe supplied plug when the Diamond StandardWheel Lock is not mounted.

Key Card

The number of the lock is only recorded on thekey card. Without this card you will be unable toorder any replacement keys.

Please keep your key card in a safe place and atall times separate from the wheel lock.

A jack is required to fit the second wheel lockand this is provided with your new caravan andshould only be used for this purpose.

Fig 2

Fig 3 Fig 4

Fig 1

10-3

SECURITY

CRIS - THE CARAVAN REGISTRATIONAND IDENTIFICATION SCHEME - VIN

CriS is the national register of UK manufacturedtouring caravans and was established by theNational Caravan Council (NCC) in conjunctionwith HPI Ltd.

All Elddis caravans are recorded on the CriSdatabase by their unique 17 digit Vehicle IdentityNumber (VIN). This VIN and the caravandescription are recorded on the Touring CaravanRegistration Document, which is sent by CriS tothe caravan’s registered keeper.

Make a separate note of the number to keep safeat home.

CriS issues Touring Caravan RegistrationDocuments which are the equivalent of the logbooks issued by the DVLA for cars - the TouringCaravan Registration Document confirms thename of the registered keeper, the VIN and fullvehicle description.

Shortly after purchasing this caravan you shouldreceive your Touring Caravan RegistrationDocument. It will be sent by post to your homeaddress.

WINDOW ETCHING & CHASSISMARKING

The VIN number is stamped onto the chassis ofthe touring caravan and etched onto all of thewindows acting as a further deterrent. YourTouring Caravan Registration Document willinclude a 17 character VIN (Vehicle IdentificationNumber), shown in the top right -hand corner.This 17 character VIN will be die- stamped intothe caravan drawbar and chemically etched on upto a maximum of 10 eye level windows. Toprotect yourself and your touring caravan, neverleave the Registration Document in the caravan.For security reasons keep it in a safe place.

If you sell the caravan please follow theinstructions on the Touring Caravan RegistrationDocument.

Please Note: If you do not receive a TouringCaravan Registration Document, lose it, or any ofthe details recorded are incorrect, please contact:CRIS - Dolphin House, New Street, Salisbury,Wiltshire, SP1 2TB. Telephone: 01722 411430

Spare windows stencils can be found in yourowners information pack for use if you ever needto order a replacement window.

ELECTRONIC TAGGING

In conjunction with the CriS registration scheme,all Elddis touring caravans are electronicallytagged during manufacture for added security andease vehicle identification. The security tagcontaining the individual identity of your caravanis concealed within the caravan body and can onlybe read by using a special decoder.

Please Note: Your Local Police Can Obtain TheUse Of A Decoder By Contacting C.R.I.S. onTelephone No. 01722 411430

ADDITIONAL SECURITY

Consider fitting any device which might deter orprevent intrusion by thieves. For example: Awheel lock will prevent towing of the caravan andremoval of the wheel.

FREE CRIME PREVENTION advice aboutsecuring your caravan, protecting your valuables,property marking, either at home or whilst onsite, can be obtained from the Crime PreventionOfficer through your local Police Station.

10-4

SECURITY

11-1

CARE OF YOUR CARAVAN

CARE OF YOUR CARAVANThis section of the guide is devoted to the care,cleaning and general preservation of your caravanin order to retain its showroom condition.

EXTERIOR CLEANING

Under no circumstances should an abrasive orharsh cleaner be used. It is stronglyrecommended that you do not use a pressurewash. Exterior body parts of the caravan areextremely durable and easy to clean. It isrecommended you first wash off any heavy dirtand mud with cold water then use a high qualitycar wash and wax then rinse with plenty of coldwater.

Caution: The use of a pressure wash onyour caravan is not recommended as it canlead to water entering the caravan via anyof the external vents and could disturb theseals.

ACRYLIC WINDOWS

Your caravan is fitted with shatter resistantacrylic windows. To preserve their clarity andunblemished transparency it is essential that thefollowing cleaning instructions are strictlyadhered to: Road grit, dust, sand, flies, lime treesecretions, bird droppings etc., should be washedoff using plenty of cold water do not use asponge to clean off heavy dirt deposits. Anyremaining dirt should be washed off using a softcloth and warm water.

Please Note: Under NO circumstances shouldany abrasive cleaning agents, householddetergents or proprietary cleaning fluids be used.Wash the window again using only cold waterand dry off with chamois leather.

Please Note: Should scratches appear on theacrylic windows these can often be removed withan acrylic polish, i.e. ICI Perspex polish. Gentlepolishing with a liquid metal polish, i.e. Brasso mayalso have the desired effect - consult your retailerBEFORE attempting to remove any but theslightest scratch.

CARE INSTRUCTIONS FOR SEITZWINDOWS

Use soap suds and plenty of water or Seitzspecial cleaning agents to wash the acrylicwindow. Use talcum powder to care for the

rubber seals. Only use water and mild soap sudsto clean the blinds.

Please Note: Do not keep the blinds closed forlong periods of time, as this can result in materialfatigue.

CARE INSTRUCTIONS FOR SEITZROOFLIGHTS

Clean the acrylic rooflight with soap suds andplenty of water, or use the Seitz special cleaner.Use talcum to care for the rubber seals.

Only use water and mild soap suds to clean theblinds.

Please Note: The 12-month guaranteebecomes null and void if these instructions arenot followed.

WINDOW BLINDS & FLYSCREENS

To clean the blinds and flyscreens, moisten a softcloth or sponge with a small amount of waterand mild soap suds and gently wipe dirt off. Allowto dry before retracting, failure to due this couldresult in mildew forming.

Pleated blinds where fitted should be cleanedusing a soft brush and if necessary hooveredusing a soft brush attachment on the device.

Winterisation/Storage

Please Note: The blind/flyscreen should not beleft in the down position when the caravan is notin use or throughout the winter as the memoryof the mechanism may be lost.

INTERIOR WALLS

Your caravan interior walls will only require awipe over with a damp cloth, using a milddetergent, to keep them in a ‘showroom’condition.

FURNITURE

Treat your caravan furniture as you would thefurniture in your home. Polish wood surfacessparingly with a good quality wax or spray polish.Use a damp cloth to clean melanate laminatedsurfaces.

COOKING EQUIPMENT

Caustic pastes, abrasive cleaning powders, coarsewire wool and hard implements will damage thesurface.

11-2


CARPETS, UPHOLSTERY ANDCURTAINS

Vacuum clean carpets and upholstery to ensure along life, marks on cushions should be cleaned bya professional cleaning company using a mildupholstery shampoo with the minimum of water.For caravans fitted with Aqua Clean upholsterymarks can be removed using a mild upholsteryshampoo. Curtains should be dry cleaned only.

SHOWER TRAYS, SHOWER ROOM ANDWASH BASIN FITTINGS

Only clean your shower tray using soap andwater. Do not use chemical based cleaningagents as this will attack the material.

CLEANING OF ALL TAPS

It is recommended that a non-abrasive dampcloth be used for cleaning the taps and showers.

WATER CONTAINERS

(i) All water remaining in any water containershould be disposed of so that the containeris empty.

(ii) The outside of external water containersshould be thoroughly cleansed and washeddown to remove any dirt, dust or othercontaminant. Water at a suitably hottemperature containing an appropriatedetergent is recommended for this purpose.Water should then be put into thecontainer, swirled round, then emptied out.

(iii) All containers should then be totally filledwith water containing an appropriatedisinfectant / sterilizing solution and allowedto stand for the recommended contact time(e.g. Milton for 15 minutes).

(iv) The solution should be emptied from thecontainer.

(v) The opening of any container should becleaned thoroughly with an appropriate pre-prepared wipe impregnated with adisinfectant / sterilizing solution.

(vi) External containers should be invertedwhilst stored overnight (if possible).

(vii) Containers must be filled with mains wateronly and mains water only should be usedfor the above cleaning procedure.

(viii) On no account should garden hoses be usedto fill water tanks.

WARNING: Under no circumstancesshould alcohol, spirit or solvent-basedliquids be used on GRP or ABS plasticpanels as these substances may react withthe material and cause visible damage.

11-3


WATER SYSTEMS - STERILIZATION

Clean the water system at the start and end ofthe season with sterilizing fluid. When cleaning itis advisable to use a sterilizing fluid e.g. ChemproSDP or similar.

Please Note: It is recommended that for thisoperation the filter is removed as the fluidreduces the effectiveness of a new filter.

(i) Drain down the system. (Open all taps toallow air in, enabling the system to drainquickly.) See Index - Water System, Draining.

(ii) Remove any water filters fitted, and replacewith a short length of hose or empty filtercartridge (this will ensure the filter is notaffected by the disinfectant / sterilizingsolution).

(iii) Fill the system by using the pump with adisinfectant / sterilizing solution. (Check thatthe solution at full strength appears at alltaps/showers). Allow to stand for therecommended period of time.

(iv) Drain the system down completely.

(v) Thoroughly clean the outside of all taps/connectors with a cloth soaked in thedisinfectant / sterilizing solution.

(vi) Flush the system through with cleandrinking water until no traces of disinfectant/ sterilizing solution can be detected at anytap.

(vii) After sterilizing the system at the start ofthe season it is recommended that a newUltraflow filter cartridge should be fitted.

Please Note: Suitable sterilizing chemicals areavailable from your Elddis Retailer, accessoryshop, chemists, or home-brew shops. It is not,however, recommended to use bleach or sodiummet bisulphide.

THETFORD TOILET

WARNINGS

• Cold Weather Use - to prevent freezingduring cold weather use, add antifreezeto the toilet system fresh water tank.Use a non-toxic (propylene glycol) typeof antifreeze. Refer to chart oncontainer to obtain level of protection.

• Warmer weather or longer intervalsbetween emptying the waste tank mayrequire additional toilet fluid. Use onlyThetford toilet fluid to achieve the bestresults.

CAUTIONS

• Never add toilet fluid directly intotoilet bowl.

• Do not use strong householddetergents or cleaners that containchlorine, solvents or acid contents.

• High Altitude and Hot Weather Use -with large temperature differences andchanging heights during towing, overpressure can start to build up in thewaste holding tank, causing contents tosplash upward upon opening the valveblade if opened too fast.

11-4


CHASSIS MOUNTED SPARE WHEELCARRIER

To gain access to your spare wheel lift the sparewheel carrier up and lift up the lockingmechanism. Then move the mechanism to thehorizontal position and the spare wheel carrierwill be free to move over the mechanism andallow the spare wheel to drop to the floor to beremoved.

To replace the spare wheel simply reverse theoperation making sure that the quick releasemechanism has been fully pushed down to createa positive lock. The carrier is of extra strong,lightweight construction and zinc plated for allweather protection. It is easy to fit and accepts allconventional wheel sizes.

TYRES

Please refer to your Technical Data sheetprovided with your customer information packfor information regarding tyre pressures and axleloads.

Pressures

It is customary for manufacturers to mark tyreswith load and inflation data. This informationrelates to the use of the tyre on cars. It isdangerous to drive with under inflated tyres. Thepressures (cold) recommended by themanufacturers should be regarded as a minimum.Pressure checks, including those on the sparetyre, should be made with the tyres cold andusing an accurate pressure gauge. The checksshould be carried out before each journey and atregular intervals during storage.

Tyre Wear and Damage

The legal requirements for tread depth on motorvehicle tyres apply also to caravans. Similarly, it isnot permitted to mix cross-ply and radial tyreson the same axle. A redundant tyre must bereplaced by one of the same size andconstruction. Wheels should be changed roundoccasionally to equal wear and prolong the life ofthe tyres. A tyre should be renewed if a blister,rupture or cut exposing the casing is detected. Ifthe tyre has suffered a violent impact e.g. againsta kerb, it should be examined by a specialist assoon as possible.

CHANGING A WHEEL

Whenever road wheels are removed and re-fitted, they must be tightened using a calibratedTorque Wrench set to 92 Nm for steel wheelsand 130Nm for alloy wheels.

Only use the wheel bolts supplied with yourcaravan. If you need to replace these bolts youshould obtain bolts from an approved ElddisRetailer.

The bolt fixings should be tightened in thesequence shown in the diagram below. Do NOTsimply tighten clockwise or anti clockwise.Remember to over tighten is just as dangerous asto under-tighten, as this can distort the wheelrims. Avoid the use of power wrenches. Wheelbolts should NEVER be lubricated.

Alloy wheel bolts can be used to fit the steelwheel until the alloy wheel is ready for refitting.

Never use steel wheel bolts to fit an Alloy wheel.

11-5


The corner steadies must not be used to jack upthe caravan. They can be lowered to touch theground only as a safety measure to stabilise thecaravan.

(i) Apply the handbrake fully as for parking. Donot forget to give the caravan a slightrearwards push to stop the reversing levercollapsing.

(ii) Slacken off the wheel bolts on the wheel tobe changed.

(iii) With a suitable jack, jack up the caravanunder either the axle tube or the axlemounting plate.

Please Note: Do Not Use The Chassis As AJacking Point. If there is lack of ground clearancebecause of a flat tyre, gently move the caravanonto some ramping boards.

(iv) Support the weight of the caravan with thejack and for added safety lower the frontand rear corner steadies on the side of theflat tyre. Then remove the ramping boards.

(v) Remove the wheel bolts and remove thewheel.

(vi) Before fitting the wheel, examine it fordistortion or other damage. Ensure that allmating surfaces are clean and dry, includingbolt/nut seats.

Please Note: Always Use the Correct Bolts toSecure the Wheel - Check with the dealer ifunsure.

Please Note: A corner steady brace is not tobe used for the next step.

(vii) Insert the wheels bolts into holes 1 then 2and then 3.

(viii) After the bolts have been screwed in as faras possible by hand, each bolt should betightened gradually in sequence. Do notover tighten at this point as the finaltightening should be done with a calibratedtorque wrench. The wheels of the caravanwill not rotate during tightening as they areheld rigid by the wheel hub brake unit.

(ix) Raise the corner steadies.

(x) Lower the caravan to the ground.

(xi) The wheel bolts should be tightenedensuring that the torque is applied evenlyaround the wheel. Using a suitable torque

wrench, sequentially tighten the steel boltsto a torque of 92Nm for steel wheels and130Nm for alloy wheels following thesequence stated above.

IMPORTANT

• The torque settings should be re-checked after 50 km (20 miles) andevery 5000 km (3100 miles) thereafter.

• Do not loosen the wheel bolts to carryout this operation whilst the roadwheel is supporting the weight of thecaravan.

• Wheel bolts should NEVER belubricated.

• NB: If you upgrade from steel to alloywheels you must ensure you use thecorrect bolts for the new wheel.

JACKING

Under no circumstances should the cornersteadies be used to jack up the caravan. When itis necessary to jack up, use a bottle, screw, trolleyor scissor type jack, one with an axle shaped headis recommended.

Place the jack plate under the axle tube as nearas possible to the main longitudinal member. Themaximum mass which the jockey wheel and itsclamping mechanism are capable of withstandingis 150kgs.

LUBRICATION

• Lubricate the Jockey Wheel

• Lightly oil the wheel axle and screw thread.

• Lubricate the Brake Linkage

• Lightly oil all moving parts.

• Lubricate the Corner Steadies

• Lightly oil the screw and pivot pins.

11-6


MAINTENANCE OF YOUR BPW CHASSIS

Our warranty becomes null and void if spareparts other than original BPW parts are used.Procurement of Spare PartsThe code and type numbers of the axle andchassis components enable us to quicklydetermine your exact spares requirements whenordering from our BPW agencies and servicestations. It is therefore recommended that youenter the data shown on the type plate in thefollowing table so that it is readily available whenrequired. The type plate or the imprint is locatedon the axle tube or on the housing of the towingequipment and couplings.Please Note: For full maintenance details of theBPW chassis, undergear and Winterhoff couplingplease refer to the individual manufacturer’shandbook supplied within your user informationpack.CARAVAN MOTOR MOVERSAny motor mover fitted shall comply with thedesign, fitment and safety requirements of NCCCode of Practice 305. The installation of a motormover shall be in accordance with the motormover manufacturer’s installation instructions.You should ensure you receive a signedinstallation certificate of compliance from theinstaller.Failure to do so may invalidate yourwarranty.

The following maintenance instructions relate tothe BPW chassis fitted to your Buccaneercaravan. They are a constituent part of thewarranty conditions. Adhere to the relevantoperating instructions of the vehiclemanufacturer or of the other vehicle componentmanufacturers.Completion of the maintenance work inaccordance with the prescribed intervals isessential in order to maintain the operating safetyand roadworthiness of the vehicle.The correction of any defects found or thereplacement of any worn parts should be carriedout by a BPW after sales service workshop,unless the vehicle user has at his disposalappropriately skilled in company workers and thenecessary technical facilities.Please Note: When installing spare parts, it isstrongly recommended that only original BPWcomponents are used. Parts approved by BPWfor caravan axles and suspensions regularlyundergo special test procedures and as a resultBPW is able to guarantee their quality. However,BPW cannot assess for every single third partyproduct whether it can be used for BPW caravanaxles and suspensions without any risk to safety.This applies even if an accredited test authorityhas already tested such products.

CATEGORY OF EXPOSURE & DURATION OF PROTECTION

The BPW chassis is protected by a hot dip galvanising process in accordance toDIN EN ISO 1461. The duration of protection is according to a salt spray test to DIN 50021 standard.

WARNING: Holes must not be made without approval of the chassis manufacturer.

12-1

STORAGE

STORAGE

LONG TERM & WINTER STORAGE

If the caravan is to be stored for any length oftime, especially over the winter period, thefollowing operations are recommended:

(i) Ensure all windows, roof lights, habitationand exterior locker doors are closed firmlyand locked.

(ii) Remove all linens, blankets, cushions, clothes,mattresses, etc, that could be affected bydamp conditions.

(iii) Clean the caravan inside and out as detailedin the previous section.

(iv) Drain the water system (see Water system).

(v) For winter storage and to prevent frostdamage all taps must be left in openposition. For those caravans with lift up tapsplease ensure the taps are left in the centralposition.

(vi) Ensure all windows, roof lights and doorsare correctly fastened. Check fixedventilation apertures are not obstructed.

(vii) Ensure that the refrigerator/freezercompartment doors are secured in the ventposition using the door catch.

(viii) Check that the site you have chosen tostore the caravan is open, fairly high and dryand if possible not exposed to gales etc. Ifthis proves impossible it is recommendedthat the caravan chassis is anchored to theground.

(ix) Jack up the caravan (use bottle or screwjack, do NOT use the corner steadies) sothat the wheels are clear of the ground.

(x) Support the caravan axle with woodenblocks, axle stands or similar so that whenthe jacks are removed the wheels remainclear of the ground. Lower the cornersteadies to ‘just’ site the caravan. Cover thetyres to prevent deterioration. Release thehandbrake.

(xi) Security: Lowering and locking the cornersteadies and removing the wheels willreduce the risk of caravan theft.

CARAVAN COVERS

Caravan covers may be used to protect your newElddis caravan provided that the cover used is ofa breathable type.

Ensure that the point of extending aerials or thestatus aerial (depending on model if fitted) areremoved or retracted, and that the cover is welltied down to avoid the cover being punctured.

Your caravan must be ventilated every 4 to 6weeks if it is to be stored with a cover in place.

POWER DRAIN

In order to reduce any drain on your leisurebattery while your caravan is being stored ensurethat the main control switch on the refrigeratoris set to the ‘0’ position

Please Note: Do not work under the caravanunless the corner steadies are down and the axleis supported.

Should the caravan be stored for a prolongedperiod of time it is strongly recommended thatthe caravan is fully serviced before thecommencement of use. Your retailer will ensurethat your caravan is safe, secure and ready foryour enjoyment.

Please Note: Caravans stored for any length oftime should not have the handbrake or brakesapplied. The wheels should be chocked orwedged and the handbrake released. The hitchhead should be checked to see that it is fullyextended and that there is no load on the brakingsystem. It is recommended that you place a bowlof salt within your caravan to absorb anymoisture during the winter months.

12-2

STORAGE

13-1

WARRANTY

CARAVAN/MOTORHOMEWARRANTY COVER(1st Owner only)

Introduction

At The Explorer Group Ltd we are confident thatour new caravans are engineered using the latestmanufacturing techniques and advanced materialstechnology ensuring that, when buying one of ourproducts, you are buying the very best. Weextend this philosophy to our customers byoffering long term peace of mind and reassurancethrough our extensive warranty cover.

Your warranty cover commences on the day yournew caravan is purchased and comprises two keyelements:

1. Three year manufacturer’s warranty

2. Ten year body integrity warranty

Scope

This applies to all new Elddis productsmanufactured from 2012 model year onwards.

Three year manufacturer’s warranty

Year 1 warranty - Covers all originalcomponents, including permanently fittedequipment forming part of the original productspecification.

Year 2 and 3 warranty – Covers all originalcomponents, including permanently fittedequipment forming part of the original productspecification, with the exception of the followingitems:

• Microwave• TV• Tyres• Batteries• Windows and glass• Deterioration of exterior paint work• Soft furnishings, carpets and floor coverings• Entertainment equipment• Fluorescent tubes, bulbs, LEDs and fuses• Plastic and GRP exterior panels• Plastic products including A-frame covers,

wheel spats and shower trays• Minor adjustment of blinds, hinges, catches,

stays and doors

Ten year body integrity warranty

Elddis products are covered against water ingressdamage for 10 years from the original date ofpurchase of a new product. (6 years forsubsequent owners from the 1st owners originaldate of purchase). This applies to water ingressthrough any permanently sealed seam joints.

In order to comply with the terms of the abovecover the following conditions must be met:

Reporting a fault

In the unlikely event that you experience aproblem with your caravan please contact yourretailer.

It is with the retailer that your contract of saleexists and consequently they have theresponsibility to ensure any complaints andwarranty issues are addressed. Any approvedElddis Retailer or Service Centre may carry outwork at their convenience or discretion, but arenot obliged to do so.

All Elddis products are classed as portable andtherefore all work under warranty requires thecaravan to be delivered and collected from theselling retailer.

Conditions attached to the warranty coverAll warranty work must be undertaken by acurrent Elddis approved retailer or Servicecentre.

• You must retain the original sale invoice forthe caravan.

• All new caravans must be registered with TheExplorer Group Ltd within 6 weeks ofpurchase as new. Your retailer can forwardthis information to us. Please keep usinformed of any name or address changes byusing the Notification of Change to Nameand Address form.

• The caravan must have an annual service anddamp check carried out by an ApprovedElddis Retailer or Service Centre. Originalinvoices and damp reports must be retainedas proof that the annual services have beencarried out in accordance with our warrantyterms.

13-2

WARRANTY

• Service intervals:

a) In years 1, 2, and 4 through to 9 theservice must be completed no morethan 60 days either side of theanniversary of the date of purchase.

b) In Years 3 and 10 the service must becompleted no more than 60 days beforethe anniversary of the date of purchase.

c) For second owners the service in years3 and 6 must be completed no morethan 60 days on or before theanniversary of the original date ofpurchase.

d) No service interval should exceed 14months. Failure to service the vehiclewithin the specified time limits willinvalidate the warranty.

• Where an annual service identifies thatrepairs are necessary the caravan must bemade available for repair within six weeks ofthe date of inspection for the purpose ofcarrying out the repair work. The ExplorerGroup Ltd reserves the right to inspect thevehicle before work commences.

• Work may only be undertaken by anApproved Elddis Retailer or Service Centreand only after approval by The ExplorerGroup Limited (depending upon individualcircumstances).

• The Explorer Group Limited will pay thecosts of remedial work to the repairer, onlyafter approved work has been carried out.The cost of transporting, towing or movingthe caravan by any means to or from theplace of repair is the responsibility of theowner.

• The Policy is not retrospective and isapplicable to 2012 model year caravansonwards.

• No liability will be accepted for anyconsequential loss, damage, costs, expensesor other claims for compensation arisingwhich were not reasonably foreseeable byboth parties when the caravan was originallypurchased.

• No liability will be accepted for damagecaused by fair wear and tear, rodent damage,willful damage, negligence or abnormalworking conditions.

• No alteration may be made to the originalconstruction.

• In the case of a dispute The Explorer GroupLimited will appoint an independentarbitrator. The Explorer Group Limited willpay for the costs of arbitration, subject to theowner paying a £250 deposit.

• If the arbitrator finds in favour of thecustomer, then the deposit will be returned.If the arbitrator finds in favour of TheExplorer Group Limited, the customer willlose their deposit.

• Where the arbitrator awards a sum ofmoney less than an offer made by TheExplorer Group Limited, which has alreadybeen rejected by the customer, then theirdeposit is forfeited.

• In all cases the arbitrator’s decision is finaland both parties must agree to abide by thedecision.

Exclusions

Warranty cover is not given for caravans if theyhave been used under any of the followingcircumstances:

• Used for hire.

• Used as a permanent residence

• Towed behind a commercial vehicle

• Used for racing or time trials

• Damage resulting from freezing, accident orfire damage

Mains electrics

It is recommended that you have your mainselectrics system inspected by a NICEIC approvedcontractor every 3 years.

13-3

WARRANTY

Transfer of ownership

If you purchase this vehicle as a used vehicle itmay be possible to transfer the unexpired termof the warranty cover (up to a maximum of sixyears commencing at the original date ofpurchase from new). The warranty cover for aused vehicle commences from the original date ofpurchase from new and is as follows:

1. Three year manufacturer’s warranty

2. A maximum of six years’ body integritywarranty

The warranty is subject to the usual terms andconditions’ set out in the handbook and is onlytransferable on payment of a £75 administrationfee. Full documentary evidence that the caravanhas been serviced annually should be provided atthe time of transfer, in accordance with the termsand conditions of the warranty stated in thehandbook. Transfer of ownership must becompleted within three months of change of legalownership. Please complete the Notification ofChange of Ownership form in your handbook.

This warranty does not affect the purchaser’sstatutory rights. The warranty shall be governedand construed in accordance with the laws ofEngland and the parties irrevocably submit to theexclusive jurisdiction of the courts of England.

13-4

WARRANTY

14-1

CODE OF PRACTICE

CODE OF PRACTICE

MAINS ELECTRICS

It is recommended that you have your MainsElectrics System inspected by an NICEICapproved contractor every 3 years.

SPARE PARTS AND NON WARRANTYWORK

Should you require any replacement parts foryour caravan it is necessary that you contact theRetailer from whom you purchased the caravanor any Explorer Group Limited approved Retailerand give the following information, which will helpin identifying the required component:

(i) Model and make of caravan

(ii) VIN number

(iii) Description of required part

(iv) Photograph, size or diagram of required part

Please Note: All parts must be ordered andsupplied through an approved retailer.

REMEDIAL WORK

The Explorer Group Limited together with itssuppliers is continually undertaking extensiveresearch into testing, remedial work proceduresand materials such as sealants, adhesives, gasketsand tapes. Therefore, if for any reason your newcaravan is damaged or requires remedial workthen only an approved Explorer Group LimitedRetailer or Service Centre should undertake suchwork.

All such work should be undertaken using onlyapproved Explorer Group Limited genuine parts,recommended sealant and following ExplorerGroup Limited procedures. The Explorer GroupLimited will also undertake to supply certainspecialist repairers with the necessary spareparts. In this case, your selected repairer mustcontact the PARTS DEPARTMENT with allenquiries.

14-2

CODE OF PRACTICE

15-1

CARAVAN CONSTRUCTION

CARAVAN CONSTRUCTION -MAIN COMPONENTSThe following is a brief description of the maincomponents used in your caravan. Morecomprehensive descriptions can be found in theequipment manufacturers literature held in theOwner’s Information Pack.

BPW CHASSIS

BPW are one of the largest producers of caravanchassis in Europe. The chassis is galvanized specialsteel fitted with neidhart axles and suspensionsystem. Elddis utilizes the new BPW V-TECChassis System.

Please Note: Holes must not be drilled into thechassis. When purchasing a stabilizer, consult yourretailer who will advise on the correct type to fit.

BRAKING SYSTEM

The Braking System comprises a rod operatedoverrunning device with expander mechanismand adjuster box. An automatic reversing systemwith a spring loaded reverse lever is attached tothe adjuster box. The system also incorporates alink device, which gives added safety to thehandbrake operation when parking on a reverseslope or steep hill. Brake adjustment instructionsare given in the maintenance section of this guide.

SOLID CONSTRUCTION BODY SHELL

Elddis (Buccaneer) Caravan Bodies areconstructed from the highest quality materials.The fully insulated floor is a constructed timberframe with plywood internal floor and a GRPunderskin for added water resistance andinsulation laminated together for strength. Thewalls comprise an insulated foam sandwich havingone piece GRP sides for ultimate resistance tominor damage and vinyl coated plywood internalfinish. Wooded framing is positioned within thesandwich to add strength. The latest technology isused to produce the extremely well insulated androbust, yet lightweight sections.

WINDOWS

Windows are all of a double glazed acrylicconstruction and the door frames are extrudedaluminium.

INSULATION

Elddis caravans are built to thermal insulationGrade 3. This states that an average temperaturedifference of at least 20ºC between inside andoutside temperatures should be achieved whenthe outside temperature is 0ºC.

FRONT PANEL AND GAS BOTTLELOCKER LID

These are constructed from moulded acrylic forstrength and lightness.

AWNING CHANNEL

Each caravan is fitted, as standard, with an awningchannel as an integral part of the near- and/or off-side aluminium roof and body side moulding. If itis found necessary to fit additional attachments,care must be taken to ensure that any holeswhich are drilled in the outside of the body arecorrectly sealed. Awnings which employ rubbersucker attachments rather than screw fixings arerecommended.

15-2

CARAVAN CONSTRUCTION

16-1

EQUIPMENT LIST

EQUIPMENT LIST

CRUSADER

REFRIGERATOR THETFORD N3112E SINGLE AXLEDOMETIC RMSL8501 IN TWIN

CENTRAL HEATING ALDE COMPLETE SYSTEM

SINK AND DRAINER HIGHLINE MOULDED SINK

OVEN SPINFLO MIDI PRIMA 500

MICROWAVE DAEWOO KOR 6L6BDBK

HOB SPINFLO DUAL FUEL 3 BURNER GAS WITH ONE ELECTRIC HOT PLATE

TAPS KITCHEN WHALE SINGLE BAR MIXER

SHOWER EQUIPMENT WHALE MIXER

TAPS VANITY WHALE SINGLE BAR MIXER / GOOSE NECK VANITY IN SUPER SIROCCOAND SUPER CYCLONE/SHAMAL

WATER FILTER / PUMP WHALE IC SYSTEM WITH HIGH FLOW PUMP

LIGHTS READING BCA SOA LED READING LIGHT

LIGHTS WALL SARGENT LED CORNER LIGHT

LIGHTS RECESSED LED BCA LED RECESSED

CONTROL PANELS CBE

ELECTRICAL FITTINGS BERKER PIANO GLOSS FINISH

TOILET THETFORD C260S

16-2

EQUIPMENT LIST

17-1

ELECTRICAL DRAWINGS

ELECTRICAL DRAWINGS

13 PIN PLUG WIRING DIAGRAM

17-2

ELECTRICAL DRAWINGS

WIRING DIAGRAM - CRUSADER

17-3

ELECTRICAL DRAWINGS

ROAD LIGHTS - CRUSADER

17-4

ELECTRICAL DRAWINGS

18-1

GENERAL QUESTIONS

GENERAL QUESTIONS

Q: Where Can I Obtain Your Latest Brochure?

A: Our latest brochures are available from Approved Retailers or can be viewed and printed from thedownload section on our website www.elddis.co.uk. A request form can also be completed should youwish to receive a printed copy of our latest brochures.

Q: Why Is the Handbook Not Specific To My Model?

A: Many of the components used in the manufacture of our caravans are identical throughout our modelranges, so we produce a generic handbook, which covers all models manufactured for that season. If theliterature supplied with your caravan does not answer your question then please contact your Retailerfor further assistance.

Q. I Require Technical Or Other Information, Who Can Help Me?

A. The majority of information you require is available through your Elddis Retailer.

Q - Can You Tell Me The Second Hand Price Of My Caravan?

A - As a manufacturer we are not involved in the second hand market. You should contact a Retailer, TheCamping and Caravanning Club and/or The Caravan Club. They should be able to give some indication ofmarket value.

Q: How Can I Avoid Excessive Caravan Snaking When I Tow And What Should I Do If ItStarts?

A: Elddis has extensively tested our caravans and we are confident of their stability. However, many otherfactors can influence your towing unit. When loading your caravan put heavy items low down and mainlyover the axle(s). You should not stow tins, bottles or heavy items in overhead lockers, during towing.Everything else should be distributed evenly around your caravan, front and back, and each side of thecentre line should snaking start, if at all possible don’t brake and don’t compensate by steering into theswings. Just ease up on the accelerator and allow your speed to gradually decrease until the snakingsubsides.

Q: What Is The Correct Awning Size For My Caravan?

A: Ground to ground awning measurements for Elddis caravans can be found by looking in the latestmodel section, the Product Archive section on our website, or by referring to the relevant Technical Datasheet. However, we advise you verify this information by threading a piece of string through the awningchannel from ground to ground, and then by measuring the string. Your awning manufacturer will thenadvise on the nearest size of awning appropriate for your measurement.

Q: Can I Fit A Bicycle Rack/Top Box/Air Conditioning To My Caravan?

A: It may be possible to fit accessories to your caravan but this will depend upon the internalconstruction of the roof/walls and whether they can support the weight of the accessory. If it is possibleyour Retailer will be able to advise you, (or alternatively they will obtain confirmation and a drawingwhere necessary, from Elddis). Please note that weight of any accessories will reduce your User Payloadallowance.

Q: My Interior Lights Are Not Working, What Do I Do?

A: It is possible that all of the 230V mains electrical equipment may not be operated simultaneously.Check fuses, battery connections and power supply (master light switch). Refer to your Retailer forfurther assistance. PLEASE NOTE: The internal lights in your caravan will not operate whilst the caravan’selectrical hitch cables are connected to a towing vehicle with the engine running.

18-2

GENERAL QUESTIONS

Q: Where Can I Get Spare Parts For My Caravan?

A: Retailers will be able to source most parts you require. For details of your nearest Elddis Retailerplease refer to our Find A Retailer section on our website, or call 01207 699 000 for assistance.

Q. How Many Years Will Spare Parts Be Available For My Caravan?

A. Elddis will endeavour to supply spare parts for a caravan, for at least 8 years from new.

Q. What If The Parts Are No Longer Available?

A. Where an original part is no longer available, whenever possible we will suggest a suitable alternative ifit is available.

Q. Who Can Carry Out Warranty Work On My Caravan?

A: Your supplying Retailer is obliged to undertake your warranty work. However, any approved ElddisRetailer or Service Centre can undertake the work, but this is at their discretion. We will also acceptservices completed by a NCC Jones Vening approved company, but they will not be able to undertakewarranty work if they are not approved by Elddis.

Q. Why Don’t You Stock Parts At The Explorer Group Factory?

A. Due to the volume of models we produce it is not possible for us to maintain stock levels of everyindividual component used in our manufacturing process. We do stock commonly requested items, butsome items must be made to order.

Q. I Am Having Trouble Booking My Caravan For Its Service, In Line With TheRequirements. What Timescale Is Acceptable?

A. Please refer to the warranty section for the terms and conditions of servicing. We would recommendthat you plan your services in advance in order to meet the requirements.

Q. I Have A Problem With My Caravan, Who Can Help Me?

A. We would always recommend that you contact your supplying Retailer. Your local Elddis Retailer orElddis Approved Service Centre may be able to assist. An inspection can then take place and thenecessary course of action agreed.

Q. I Am Unhappy With The Service I Have Received From My Retailer/Service Centre,Where Do I Go From Here?

A. We would recommend that you write to your Retailer/Service Centre, detailing your problems andrequirements, requesting a response explaining how they will resolve your complaint. A copy of yourletter can also be forwarded to The Elddis Customer Services Department, quoting the serial number ofyour caravan and the name of the Retailer/Service Centre. Please be assured that we will assist yourRetailer/Service Centre in resolving any problems.

19-1

GLOSSARY

GLOSSARY

13 pin plug

The plug used to connect the caravans electricalsystem to your towing vehicle to enable the roadlights, refrigerator and battery charger to operateduring towing.

A Frame

This is the triangular part at the front of thecaravan’s chassis which is between the main bodyand the hitch it is also called the drawbar.

ABS

This is an acronym for anti-lock braking system.

Actual Laden Weight

This is the total weight of the caravan whenloaded ready for use by the end user.

Aquaroll

Brand name used generically for a watercontainer that rolls so you don’t need to lift it.

Awning

This is a tent-like structure of fabric over asupporting framework, which can be attached tothe side of caravan.

Battery Charger

This is required to keep a leisure battery charged.All caravans include a charging facility whichoperates via the mains hook-up, and also has theability to recharge from the tow car’s alternatorwhile travelling.

Berth(s)

Sleeping place - Refers to the number of people acaravan can accommodate for sleeping.

Blown Air Heating

A method of heating the living quarters of acaravan by use of a fan pushing air out through anumber of outlets.

Breakaway Cable

A thin steel cable linking the caravan handbraketo the vehicles tow bar - In the event of thecaravan becoming detached from the car, thecable will pull the caravan handbrake on beforesnapping.

Bunk Bed

This is a sleeping place, usually higher up than aconventional bed. Often (but not always) this canbe folded or removed to provide additional livingspace.

Butane

Is a form of Liquefied Petroleum Gas (LPG) whichnormally comes in blue cylinders. This type of gasis most commonly used in the UK, although aswitch to propane is advised in severely coldweather conditions.

Calor

This is the main supplier of propane (red) gascylinders and significant seller of butane (blue)gas.

Campingaz

This is the trade name of Butane gas.

Cassette Blind

This is a roller blind which is fitted as part of thewindow assembly, often along with a flyscreen,thus giving a neat installation.

Cassette Toilet

A form of chemical toilet found in moderncaravans, where the waste holding tank can beaccessed and emptied from, outside.

Chemical Toilet

Most modern caravans have them, with more upmarket models having a fully plumbed-in flushingversion.

Control Panel

Used as the description for the panel of electricalswitches and gauges governing 12V and mainselectricity systems.

Corner Steadies

The winding device built into each corner of acaravan chassis that is used to stabilise the bodyonce set up on a pitch.

19-2

GLOSSARY

Coupling Head - See hitch.

CRiS

This is the Caravan Registration and IdentificationScheme. It is a voluntary scheme which registerscaravans in a similar manner to how motorvehicles are registered. Allows you to check thelegitimate right to ownership of the seller of asecondhand caravan, and helps in the recovery ofstolen caravans.

Dinette

This is a popular style of seating arrangementwhere two seats or settees face each otheracross a table.

Earth Leakage Circuit Breaker

ELCB Earth leakage circuit breaker - see residualcurrent device (RCD)

ELCB

Earth Leakage Circuit Breaker. More normallytermed RCD.

Essential Habitation Equipment

Those items and fluids required for the safe andproper functioning of the equipment forhabitation as defined by the manufacturer of thecaravan. This includes items such as the leisurebattery and gas cylinders, plus water contained inthe water heater etc.

Flyscreens

Mesh fittings for windows doors and roof vents,to keep out insects etc.

Free-Standing Table

This is a table which, because of its leg design, canbe used inside or outside.

Full Service Pitch

This is a pitch which has individual provision forfresh water supply and waste water disposal, inaddition to mains electricity and in some cases TVaerial connection.

Gas Cylinder

This is a portable, pressurized container for thestorage of LPG.

Gas Cylinder Locker

Is the compartment on the caravan for thestorage of gas cylinders.

Gas Drop out Holes

These are not part of the ventilation. LPG isheavier than air, so holes through the floor belowgas-powered appliances allow any leakage of gasto exit the habitation area.

Grey Water

This is the waste water from sink/shower.

Gross Train Weight

This is also known as Combined Weight. Themaximum permitted weight of an outfit asspecified by the tow car manufacturer.

Gross Vehicle Weight (GVW)

This is the weight of the vehicle laden to itsmaximum, as defined by the manufacturer. Seealso MTPLM.

GRP

Is Glass-reinforced plastic, but more commonlyknown as glass fibre (not fibre glass, which is atrade name).

Handbook

This is a owners manual, a guide to the workingsof your caravan.

Hardstanding

This is a pitch which has a hard surface made ofgravel, asphalt, concrete etc, instead of grass.

Hitch

This is the mechanism which allows a caravan tobe attached to a tow ball.

Hitch Lock

A security device that prevents the caravan hitchbeing used.

Hook-Up

This is a facility on a pitch for connection tomains electricity.

Ingress

Usually meaning water ingress, a possible problemwhere water seeps in at the joins, usually as aresult of worn sealant.

19-3

GLOSSARY

Jack

This is a device for raising the vehicle so that awheel can be changed, for instance. Not to beconfused with corner steadies which althoughthey are sometimes referred to as ‘corner jacks’are steadying, not lifting devices.

Jockey Wheel

The small front wheel attached to the caravan A-frame used to support the forward end of thecaravan, when detached from the towing vehicle.

Kerb Weight

This is the empty weight of a motor vehicle asdefined by the manufacturer.

Layout

This is the interior design and details wherefurniture units are placed in relation to eachother.

Leisure Battery

This supplies the power for the caravan electricalsystems and is sometimes called an auxiliarybattery.

Levelling

The process of ensuring that a caravan is levelwhen sited on a pitch. It is important for comfortand also to ensure the correct functioning of thefridge and water systems.

LPG

Liquid Petroleum Gas, i.e. butane or propane.

L-Shaped

This is a term where the seating area of a caravanis indeed L-shaped.

Mains Hook-Up

This is a campsite facility where you can plug intoa mains electricity supply.

Maximum Hitch Height

The maximum height at which the hitch shouldbe connected to a towing vehicle

Maximum Permissible Towing Weight

This is the maximum weight that the towingvehicle is allowed to tow.

Maximum User Payload

This is the maximum payload available for theuser including essential habitational equipment.

MIRO - Mass In Running Order

Weight of the caravan equipped to themanufacturer’s standard specification. Thereforethe condition in which it leaves the factory. Notethat this does not include any part of the userpayload, including the essential habitationequipment.

MTPLM - Maximum TechnicallyPermissible Laden Mass

The technical maximum permissible laden weightof the caravan, this must not be exceeded.

National Caravan Council

The only trade association representingmanufacturers, retailers and suppliers within thecaravan industry.

Nose weight

The weight exerted on the tow bar. Special scalesare available from accessory shops for measuringthis weight.

Number Plate

Caravans must display a legal number plateshowing the same registration mark as theirtowing vehicle.

Optional Equipment Payload

The payload required for equipment to enablethe caravan to be used for habitation purposes.

Outfit

The caravan and its towing vehicle considered asa unit.

Owners’ Club

This is a group of people who usually own thesame brand of caravan and enjoy meeting up forrallies.

Payload

The amount you can put into a caravan.Specifically the difference between the MaximumTechnical Permissible Laden Mass (MTPLM) andthe Mass In Running Order (MIRO).

19-4

GLOSSARY

PDI

This is an inspection undertaken by the Retailerprior to handover to the customer.

Pitch

A designated area of a caravan site allocated forthe use of one outfit. Most sites will be arrangedwith defined pitches.

Propane

Gas used in colder conditions and is usuallysupplied in red cylinders.

RCD

This is a residual current device and is part of theelectrical system which will ‘trip’ if there is anelectrical fault.

Gas Regulator

Safety device fitted between the gas cylinder andthe gas system of a caravan, which controls thepressure of gas being released from the cylinder.

Road Lights

The external lights used while the vehicle istravelling.

Roof Lights - See Roof Vent.

Roof Vent

Is an opening unit in the ceiling which lets inventilation and light, these vary in size, but thebest ones will have integral blinds and flyscreensand are also called rooflights.

Semi-Rigid Pipe work

Is water pipes made of a semi rigid plastic and areinfinitely preferable to cheaper convoluted pipingwhich can act as a trap for germs and smells.

Single Axle

This is a caravan with a single pair of wheels onone axle. See also twin axle.

Slats

Sometimes used for beds and can improveventilation to mattress cushions.

Space Heater

This is a type of heating equipment for the livingquarters. Modern units fitted offer gas and mains-operation.

Speed Rating

This is the maximum speed at which a tyre maybe used, as marked on its sidewall.

Stabiliser

A safety device which helps to prevent instability,this is done by increasing the friction betweenthe caravan hitch and the tow ball.

Steady Winder

A handle for operating the corner steadies.

Torque Wrench

A form of spanner used to set nuts and bolts to aspecified degree of tightness. It is recommendedfor adjustment of wheel fixings on caravans.

Towing Limit

See manufacturer’s braked towing limit andmanufacturer’s unbraked towing limit.

Towing Mirrors

Additional rear vision mirrors added to a towingvehicle to provide a greater width of view to seepast a caravan.

Train Weight

The maximum permissible combined weight oftow car and touring caravan.

Twin Axle

Is a caravan with two pairs of wheels, on twoaxles which are located close together. These areusually the larger, heavier caravans, where thesecond axle helps carry the greater weight moreeasily, and also makes a longer caravan morestable to tow. See also single axle.

User Payload

The weight of all items carried in the caravan.

U-Shaped Settee

Usually a reference to seating that literally is ‘U’shaped.

Vehicle Kerb weight

The weight of the tow car often indicated in themanufacturers specifications..

19-5

GLOSSARY

VIN - Vehicle Identification Number

This is a unique serial identification number for avehicle. All Cars and motor caravans should carrya VIN. Caravans are not obliged to, but most ofthose sold in recent years in the UK do as aresult of the CRiS voluntary registration scheme.

Warranty

Is the terms and conditions that spell out yourrights with regard to servicing, repair orreplacement of parts as provided by themanufacturer.

Wild Camping

Term used for staying overnight away from acampsite. Illegal in many countries, but permissionmay be granted by individual landowners.

19-6

GLOSSARY

20-1

SERVICE DOCUMENTS

SERVICE DOCUMENTS

TOURING CARAVANS - ANNUAL SERVICE RECORD

In order to take full use of your warranty offered by The Explorer Group Limited it is essential that yourcaravan is serviced within the time scale laid down in the warranty terms and conditions. See Index -Warranty Terms & Conditions. Whether you use your caravan for short journeys or for touring at homeor abroad, regular servicing will help to ensure that you can enjoy it to the full. The Annual Service offeredby your retailer will include the following work and it is our recommendation you have your caravanserviced to this standard annually, in accordance with the National Caravan Council recommendations.

The retailer will complete the record in this guide to show the work has been carried out.

SECTION (A) CHASSIS

1. Brakes

2. Suspension

3. Axles and Hubs

4. Tyres and pressures

5. Wheeled nuts

6. Towing hitch and reverse

7. Jockey wheel

8. Breakaway chain

9. Corner steadies

10. Adjusted and lubricated

11. Fully operational

SECTION (B) EXTERIOR

1. Exterior panels

2. Windows

3, Rooflights

4. Entrance door/Door locks

5. Wheel boxes

6. Mouldings

7. Gas bottle and fairing

8. Ventilators

9. Paintwork

10. All seals, mouldings etc.

11. Damp test

12. Striping etc.

SECTION (C) INTERIOR

1. Wall panels

2. Furniture

3. Curtains/Blinds/Flyscreens

4. Mattresses

5. Carpet

6. Doors and drawers

7. All hinges and catches

8. Ventilators

9. Water pumps

10. Hoses and sink plugs

11. Hot water system

12. Cold water system

13. Window hinges and stays

14. Cassette toilet

15. Shower

16. Shower tray

17. Central heating

18. Damp test

SECTION (D) ELECTRICAL

1. Reflectors

2. All interior lights/Road lights

3. Water pump and switches

4. Refrigerator

5. Distribution unit

6. Charging unit

7. Junction box/Strip

8. Wiring and supports

9. Trailer connecting plug sockets

10. Overall tests etc.

11. Awning lights

12. Electronic ignition (hob)

13. 230V system where applicable

(Continued)

20-2

SERVICE DOCUMENTS

SECTION (E) GAS INSTALLATION

1. Hotplate

2. Refrigerator

3. Heater

4. Leak tested

5. Water heated

6. Fully operational

CARE WARRANTY

It is a condition of this warranty that a service and safety check is carried out by your caravan retailer atleast once a year (12 months from the date of purchase) in accordance with the National CaravanCouncil recommendations.

SECTION (F) FINAL

Road test

1st SERVICE

DATE:

RETAILERS STAMP:

I/We certify that an annual service has beencarried out in accordance with themanufacturers’ and National CaravanCouncil recommendations.

2nd SERVICE

DATE:

RETAILERS STAMP:


3rd SERVICE

DATE:

RETAILERS STAMP:


4th SERVICE

DATE:

RETAILERS STAMP:


ANNUAL SERVICE RECORD

MODEL .......................................................................................................................................................................

VEHICLE IDENTIFICATION NUMBER ...................................................................... YEAR ...........................

20-3

SERVICE DOCUMENTS

5th SERVICE

DATE:

RETAILERS STAMP:


7th SERVICE

DATE:

RETAILERS STAMP:


9th SERVICE

DATE:

RETAILERS STAMP:


11th SERVICE

DATE:

RETAILERS STAMP:


6th SERVICE

DATE:

RETAILERS STAMP:


8th SERVICE

DATE:

RETAILERS STAMP:


10th SERVICE

DATE:

RETAILERS STAMP:


12th SERVICE

DATE:

RETAILERS STAMP:


20-4

SERVICE DOCUMENTS

13th SERVICE

DATE:

RETAILERS STAMP:


15th SERVICE

DATE:

RETAILERS STAMP:


17th SERVICE

DATE:

RETAILERS STAMP:


19th SERVICE

DATE:

RETAILERS STAMP:


14th SERVICE

DATE:

RETAILERS STAMP:


16th SERVICE

DATE:

RETAILERS STAMP:


18th SERVICE

DATE:

RETAILERS STAMP:


20th SERVICE

DATE:

RETAILERS STAMP:


21-1

CHANGE OF OWNERSHIP

NOTIFICATION OF CHANGE OF OWNERSHIPIf you purchase this vehicle as a used vehicle it may be possible to transfer the unexpired term of thewarranty cover (up to a maximum of six years commencing at the original date of purchase from new).Please refer to the warranty section of the handbook for terms and conditions.

Please complete the attached form and post it to us along with the following information:

• A copy of the new CRIS registration form

• A copy of the service handbook displaying complete and up to date service history*

• A cheque for £75 made payable to The Explorer Group Ltd

Transfer of ownership must be made within the first three months of any change of legal ownership inorder for the warranty cover to remain valid.

Elddis and Buccaneer Customer CareThe Explorer Group LtdDelves laneConsettCounty DurhamDH8 7PE

This form is also available for you to print from our web site.

NOTIFICATION OF CHANGE OF OWNERSHIP

Previous owner details (if known):

Name: ....................................................................................................................................................................................

Address: ................................................................................................................................................................................

................................................................................................................................................................................................

............................................................................................................................ Post code: ..............................................

New owner details:

Name: ....................................................................................................................................................................................

Address: ................................................................................................................................................................................

................................................................................................................................................................................................

............................................................................................................................ Post code: ..............................................

Daytime telephone number: ........................................................... Date of purchase: ..............................................

Details of Caravan:

Range: ....................................................................................... Model: ..............................................................................

Vehicle identification number (17 digits): ......................................................................................................................

* In order for you warranty to remain valid, your caravan must have been serviced annually by an Approved Elddis orBuccaneer Retailer or Service Centre.

If you would like to receive information about products and services from Elddis or Buccaneer, please tick. ❑

✂................................................................................................................................................................................................

21-2

CHANGE OF OWNERSHIP

22-1

CHANGE OF ADDRESS

NOTIFICATION OF CHANGE TO NAME AND ADDRESSIn order that we can provide you with the very best level of service we ask that you keep us informed ofany changes to your contact details.

Should your details change please complete the online form on our website, in our ‘Customers’ section.Alternatively, please complete the attached form and post to us:

Elddis and Buccaneer Customer CareThe Explorer Group LtdDelves LaneConsettCounty DurhamDH8 7PE

NOTIFICATION OF CHANGE TO NAME AND ADDRESS

Previous details:

Name: ....................................................................................................................................................................................

Address: ................................................................................................................................................................................

................................................................................................................................................................................................

............................................................................................................................ Post code: ..............................................

New details:

Name: ....................................................................................................................................................................................

Address: ................................................................................................................................................................................

................................................................................................................................................................................................

............................................................................................................................ Post code: ..............................................

Daytime telephone number: ........................................................... Date of purchase: ..............................................

Details of your Caravan:

Range: ....................................................................................... Model: ..............................................................................

Vehicle identification number (17 digits): ......................................................................................................................

If you would like to receive information about products and services from Elddis or Buccaneer, please tick. ❑

✂................................................................................................................................................................................................

22-2

CHANGE OF ADDRESS

23-1

INDEX

A

AerialAvtex ................................................ 9-33

Alarm .................................................... 9-34Automatic Charging System ............... 8-2

B

Battery Installation ............................... 8-1Battery Maintenance ............................ 8-1Blinds .................................................... 9-28BPW Intelligent Drive Control ...... 9-35Breakaway Cable, use of ...................... 3-3Bulb Ratings ........................................... 8-2

C

Cables, checking .................................... 3-5Caravan Construction -

Main Components .................... 15-1Awning Channel ............................ 15-1BPW Chassis .................................. 15-1Braking System .............................. 15-1Front Panel and Gas Bottle

Locker Lid .................................. 15-1Solid Construction Body Shell ... 15-1Windows ......................................... 15-1

Caravan Handling .................................. 4-1Carbon Monoxide Detector ........... 9-20Care of your Caravan ....................... 11-1

Acrylic Windows ........................... 11-1Carpets, Upholstery and

Curtains ...................................... 11-2Chassis Maintenance .................... 11-6Chassis Mounted Spare

Wheel Carrier .......................... 11-4Chassis Spare Parts ....................... 11-6Cleaning of all Taps ........................ 11-2Cooking Equipment ...................... 11-1Exterior Cleaning .......................... 11-1Furniture ......................................... 11-1Interior Walls ................................. 11-1

INDEX

Jacking .............................................. 11-5Lubrication ...................................... 11-5Seitz Windows ............................... 11-1Shower Trays, Shower Room

and Wash Basin Fittings ........... 11-2Thetford Toilet ............................... 11-3Tyres ................................................. 11-4Water Containers ......................... 11-2Water Systems - Sterilization ..... 11-3Window Blinds & Flyscreens ...... 11-1

Care of your caravanChanging a Wheel ......................... 11-4

Charging System ................................... 8-2Code of Practice ................................ 14-1

Mains Electrics ............................... 14-1Remedial Work .............................. 14-1Spare Parts and non

Warranty Work ......................... 14-1Covers .................................................. 12-1

D

Doors ................................................... 9-30

E

Electrical Control Panels .................... 9-1Electrical System ................................... 8-1Electricity ................................................ 6-1

12v Systems ....................................... 6-1Connecting To Mains Supply .......... 6-1Disconnecting Mains Supply .......... 6-2Generator/Charger ......................... 6-1Mains Supply ...................................... 6-1Overseas Electrical Connection ... 6-2Power Supply Charger .................... 6-1

Equipment ListCrusader ......................................... 16-1

F

Fire Safety ............................................... 2-2Fuses ........................................................ 8-3

23-2

INDEX

G

Gas ........................................................... 6-3Connection ........................................ 6-3Hoses .................................................. 6-3Regulator ............................................ 6-3

Gas Safety Advice ................................. 7-1Generators / Charger .......................... 8-1Glossary ............................................... 19-1

H

Handbrake .............................................. 3-5Heating System

Alde .................................................. 9-17

I

Insulation ............................................. 15-1Introduction ........................................... 1-1

L

Leveller Jack ........................................... 5-1Levelling, front & back .......................... 5-1Levelling, side to side ........................... 5-1Loading .................................................... 3-1

M

Mains Unit .............................................. 8-1Microwave ........................................... 9-19Model Year .............................................. 1-1

N

Nose Weight Indicator ........................ 3-1Notification of Change of

Ownership ................................. 21-1Notification of Change to

name and address ..................... 22-1

P

Parking ..................................................... 5-2Pitch, selecting ....................................... 5-1

Power Drain ....................................... 12-1Pre-Tow Checklist ................................ 3-2

R

Radio/CD with MP3 .......................... 9-33Ramp........................................................ 5-1RCD ......................................................... 8-1Refrigerator

Dometic RM8501 .......................... 9-10Thetford N3112E ............................. 9-6

Reversing ................................................ 4-1Road Lights

Crusader ......................................... 17-3Rooflights ............................................. 9-26

S

Safety, general ........................................ 2-1Seating (wrap round) ........................ 9-32Security

Additional Security ....................... 10-3Caravan Theft ................................. 10-1CRIS ................................................. 10-3Electronic Tagging .......................... 10-3

Service Documents ........................... 20-1Setting Off .............................................. 4-1Site Regulations ..................................... 5-1Smoke Detector ................................ 9-20Speed Limits ........................................... 4-1Stabiliser - Hitch Head Operation .... 3-2Storage

Long Term & Winter ..................... 12-1

T

Taps ....................................................... 9-28Television

Avtex LCD Flat Screen ................ 9-33Toilet

Thetford C260 ............................... 9-21Towing Weight Ratio ............................ 3-1Tyres ..................................................... 11-4

23-3

INDEX

U

Uncoupling ............................................. 3-3

V

Ventilation .............................................. 2-2

W

Water System ........................................ 6-4Whale IC System with

High Flow Pump .......................... 6-4Wheel Changing ................................ 11-4Windows ............................................. 9-28Wiring Diagrams

Crusader ......................................... 17-2

23-4

INDEX

© Designed and Printed by Preset Graphics. Tel: 01332 549278. (MY2013. Ref: 21267)

All the illustrations and descriptive matter in this guide are intended to give a general idea of thecaravan. Changing market and supply situations may prevent the manufacturer from maintainingthe exact specifications and details in this handbook and we therefore reserve the right to alter

specifications and materials as conditions demand.Retailers are independent of the manufacturer and have absolutely no authority to bind the

manufacturer by any express or implied undertaking or representation.

The Explorer Group Limited Delves Lane, Consett, Co. Durham DH8 7PETelephone: 01207 699000 • Facsimile: 01207 699001 • www.explorer-group.co.uk

Issue 5Model Year 2013

OWNERSHANDBOOK

Touring Caravan