Totaline

Copper pipe for 410

Why Totaline 410 A CopperTOTALINE COPPER SPECIFICATIONS FOR R410AAnnealed coil and hard drawn straight

Chemicals UNS. C112200 (Cu 99.9%, P 0.015-0.040%)

Cleanness Tubes are cleaned, evaporated and capped. Any residual shall be less than 0.038g/m²

Min Wall Thickness The recommended minimum wall thickness is shown in the Table A and B below.

Tube Integrity All tubes are electronically tested by Eddy Current method, to the requirement of ASTM E243

Safety Medical gas system tubing conforming to ASTM B819 or equivalent.

Why Totaline 410 A Copper

COPPER TUBE SPECIFICATIONS ( Pan Cake Soft Copper)

Why Totaline 410 A Copper

COPPER TUBE SPECIFICATIONS ( Hard Drawn Copper Tubes)