Embed Size (px)
Citation preview
Powered by
The marketplace for engineering machineryMay 2017 volume: 15 number: 4
OF
7504
Haas Factory Outlet – New ZealandA Division of Aotea MachineryPO Box 12646, Penrose, Auckland 1642, New ZealandTEL: 09 525 6907 FAX: 09 525 7108 EML: [email protected]
HAAS VF-3, ST-10YAUTOMATION INC. THE
CHOICEIS
SIMPLETEL: Karl Medley 021 271 0923
AM
752
2
Haas Factory Outlet – New ZealandA Division of Aotea MachineryPO Box 12646, Penrose, Auckland 1642, New Zealand
TEL: 0800 HAASNZ (422769) EML: [email protected] www.haasnz.com
HAAS VF-3, ST-10YAUTOMATION INC.
THE CHOICE IS SIMPLE
Haas Factory Outlet – New ZealandA Division of Aotea MachineryPO Box 12646, Penrose, Auckland 1642, New ZealandTEL: 09 525 6907 FAX: 09 525 7108 EML: [email protected]
HAAS VF-3, ST-10YAUTOMATION INC. THE
CHOICEIS
SIMPLETEL: Karl Medley 021 271 0923
Contact HFO-NZ for Delivery Availability
Two certified HAAS factory trained technicians NZ wide
See us at Stand 45
CS
754
4
www.cncservices.co.nz 09 521 6366 Email [email protected]
L300LMC Specifications12” chuck750mm swing1350mm Z travel90mm bar capacity3,000 rpm12 Tool millturn BMT65P turretChip conveyor & bucket6 bar coolant pressureManual guide i
KF5600 SPECIFICATIONSX axis 1,100mmY axis 560mmZ axis 520mm12,000 rpm spindle40m/min rapids30 tool ATC BBT401,000kg table loadThrough spindle 20bar coolantChip conveyor and bucketEx Stock $150,000
CNC SERVICES LTD OFFERS YOU NOW AVAILABLE ex stock May CL650 x 2300 flat bed CNC lathe from Kinwa, Taiwans leading brand of manual and CNC teach lathes.NEW
Priced from $150,000.00
KF5600 SPECIFICATIONSX axis 1,100mm
Y axis 560mm
Z axis 520mm
12,000 rpm spindle
40m/min rapids
30 tool ATC BBT40
1,000kg table load
Through spindle 20bar coolant
Chip conveyor and bucket
L300LMC Specifications
12" chuck
750mm swing
1,260mm Z travel
90mm bar capacity
3,000 rpm
12 tool BMT turret
Chip conveyor & bucket
6 bar coolant pressure
Priced from $175,000.00
Machines available ex stock Auckland
Priced from $150,000.00
KF5600 SPECIFICATIONSX axis 1,100mm
Y axis 560mm
Z axis 520mm
12,000 rpm spindle
40m/min rapids
30 tool ATC BBT40
1,000kg table load
Through spindle 20bar coolant
Chip conveyor and bucket
L300LMC Specifications
12" chuck
750mm swing
1,260mm Z travel
90mm bar capacity
3,000 rpm
12 tool BMT turret
Chip conveyor & bucket
6 bar coolant pressure
Priced from $175,000.00
Machines available ex stock Auckland Kinwa SpecificationsFanuc Oi control with Manual guide iSpindle bore 104mm8 Tool hydraulic turretFully enclosed splash guard with door interlocksMax swing 660mmMax turning length 2060mmTotal Weight 5,200kg
Professional Support & Training
Contact our team at:[email protected]
TC
754
6
Total CNC Products Ltd 09 274 5890 • www.totalcnc.co.nz
TC
754
7
Victor Vcenter P106 The latest model from Victor-Taichung offers the newest technology in high
precision and machine performance. This exceptional new machine is a great choice for either mold making or production machining.
Travel XYZ – 1020mm x 600mm x 560mm, BT40 12,000rpm oil cooled spindle.Latest Fanuc Oi-MF controller with high end options and features.
Machine can be viewed anytime in our Auckland showroom and available for immediate installation.
Microcut VMC-1300 CNC Machining CenterFantastic value “work horse” machine with exceptional capacity and rigidity.This machine will out perform others in the same class and offers great value for a large , rigid and versatile VMC. Travels 1300mm x 710mm x 710mm, BT40 10000rpm spindle, 20/15kW spindle motor, 32 Tool ATC, Coolant thru spindle
4th axis preparation, Siemens 828D conversational controllerMachine can be viewed anytime in our Auckland showroom
and available for immediate installation
See us at Stand 88
Kitamura 3XD
SouthMach Special!
- Travel 760mm x 510mm x 510mm
- 12,000rpm BBT40 Spindle with HUGE power
- 24 tool ATC
- Coolant through Spindle
- Many other options and high speed features included.
- Available for immediateinstallation following SouthMACH.
RP
753
6
2 | May 2017 — www.machineryseller.co.nz
CNC Pressbrakes
Plasma Cutter CNC Shear
CNC Router IPG Fibre Laser Cutter
Plate Rollers CNC Tube Benders
• 4Axis:Y,Y2,X,R• Hydrauliccrowning• Frontsheetsupportonguiderails
*Controller:DelemDA66T(touchscreen)
PressbrakeAccessories
ToolingCabinet
DieProtectionTapeFabricTape
Westockafullrangeoftooling
• Powersource:Hypertherm(HighdefinitionXDseries)• Driveaxis:Yasakawa(Japan)
• Software:Fastcamprofessional
Auto heightcontrol
• Lasercuttingline• Backgauge600mmonballscrew• Bladesuitableforstainlesssteel
*Controller:DAC360
• Yasakadrivemotor• Rack&pinionarrangement
*HSD(Italy)spindle
• Vaccuumbed• Fastcamsoftware• Autotoolchanger(optional)
• X&YaxisACservomotor:Schneider(France)
• Controlcabinet:BystronicDNE
• Maxthickness(withO2):8mms.s.-12mmm.s.
• Opticalsystem&lasercuttinghead:SwissBystronictechnology
• HighprecisionXaxisrackandgear:
Gudel(Swiss)M3helicaltooth• Lasergenerator/power:
ImportedoriginalIPGFibrelaser
• Tablesize:1500x3000mm
• Threedrivenrolls• Motorisedup&down
• Hardened&groundrolls
*PyramidstylerollsARRIV
ING
SOON • Drivenbyelectricservoforbetterspeedandaccuracy
• Springbackcompensation• Splitbendfacilityforlargebendradii• Allaxesfullyprogrammable,nomanualsettings
CALL US
NOW
CM
754
5
www.machineryseller.co.nz — May 2017 | 3
COMPETITIVE PRICES PREMIUM BRANDS
CUSTOM MADE
New Zealand Australia
+64 9 640 0070 | +61 7 3849 [email protected]
P R E S S B R A K ET O O L I N G
Model shown - DYE NG/ADS Press Brakewith Cybelec Controller
MACHINERY
www.dyemachinery.com
SHEET METAL
REALPRECISION
VE
751
8
VE
751
1
ABRASIVE WATERJETS
SEE ME IN ACTION AT SOUTHMACH MAXIEM MODEL 1530
1.5M x 3.0M Table with an A-Jet 5 Axis cutting head.
Contact the New Zealand Distributor: Roadrunner Manufacturing (NZ) Ltd
Ph 06 322 1575 – email: [email protected]
R 7
521
See us at Stand 191
The A-Jet is a completely software-controlled multi-axis cutting head that greatly expands the versatility of the MAXIEM JetMachining
Centre. With a cutting range from 0° to 60°, the A-Jet can easily cut beveled edges, angled
sides, and countersinks.
25 Tonne Gantry Crane• A standard fixed yard gantry crane
• All bolted construction
• Approx. 6.8m gap between main legs
• Approx. 10m lifting height
• Two speed lift
• Side shift
Viewing welcomed
CALL DUNCAN 027 486 1212$25,000 ONO
BT 7503
3D PRINTERS
STOCK CLEARANCE SALE ! AS NEW MOJO FDM STRATASYS 3D PRINTER RRP $10,000+Prints professional-quality models at your desk using ABS Mate-rial(9 Colours to choose from)and Soluble Support materialMojo Print Wizard and Control Panel software included.MUST GO!! $3,500 +GST.Call Paul 021 646 576 or email [email protected]
STOCK CLEARANCE SALE! 2ND HAND UPRINT SE FDM STRATASYS 3D PRINTER RRP $17,500+Build in real ABSplus thermoplastic,(Ivory only) creating models and functional prototypes that are durable, stable and pinpoint accurate.CatalystEX software included.MUST GO!! $5,500 +GST.Call Paul 021 646 576 or email [email protected]
AIR TOOLS
HEAVY DUTY AIR TOOLS, IMPACT WRENCHES, AIR CHISELS, IMPACT TOOLS, SCALERS ETCFor sales service and hire. [email protected] 09 636 2264
BANDSAWS
AMADA HFA 400 CNC HORIZONTAL BANDSAWFULLY AUTOMATIC BANDSAW -TOP CONDITION Machine imported from Japan 2008 done only a couple of days work since Great saw for production work 10mm - 400mm Cutting CapacityOPERATOR INPUT OF ONLY- 1/ GRADE OF STEEL2/ SHAPE OF WORK3/ DIMENSION OF WORK4/ LENGTH5/ No OF PIECES ALL OTHER CUTTING DATA IS RESI-DENT IN THE CONTROL Email [email protected] $17,000 Phone 027 2817492
BUILDING FOR LEASE
EXCEPTIONAL FRINGE CBD INDUS-TRIAL - WALTHAM, CHRISTCHURCHExceptional industrial property now available for lease, featuring a generous stand-alone yard and car parking area, a 7 metre wide container height door, and the ver-satility of the 7.7 metre stud height warehouse factory. One of the two warehouse bays come complete with a certified gantry crane.Approximate Floor Areas;- 900sqm factory/warehouse- 290sqm office/showroom- 50sqm mezzanine- 22 car parksLocated within a sought after and central location, close to Moor-house Avenue.Call Nick O’Styke 027 696 9801 or 03 375 4803Whalan and Partners Ltd, Bayleys, Licensed under the REA Act 2008
BUILDINGS FOR SALE
922 GREAT SOUTH ROAD, PENROSE - FOR SALE BY AUCTIONsuperbly located freehold industrial land parcel totaling 1,163m². The net lettable area is approximately 482m² comprising a mixture of warehouse, showroom and office. The premises has two roller doors that service the warehouse and 3 phase power. There are also kitchen and bathroom facilities at both the front and rear of the property.The property has a circa 450m² yard or car parking area at the rear of the site allowing for 13 car parks or the possibility for devanning con-tainers. Adding to this are four car parks both at the front of the property and down the southern side of the building totalling 21 car parks. The property is located just 200m from State Highway 1, which will allow good accessibility for clients and staff. The opportunities for signage in a location like this are extraordinary. All information is available on request.• 1,163m² Heavy Industrial freehold land• 482m² of building• Motorway access• Signage opportunity• Ability to split into separate tenan-cies• Vacant possession offers angles• Container drop / 21 car parksAuction at 34 Shortland Street, City on Thu 18 May at 10:00a.m. unless sold prior.Contact : Nick WilsonCommercial / IndustrialM 027 320 5333OR : James Marshall - Commercial / IndustrialM 021 400 339
CD
753
1
Kasuga ACE120
Ph 09 6222169 [email protected]
1200 x 600 travel, Fanuc 18M controlApprox. 45 toolholders, Excellent condition
Japanese machine
ONLY $22,000 +GST
14 MegaPixels
2272x1704
VECTOR REAL ESTATE LTD, BAYLEYS, LICENSED UNDER THE REA ACT 2008.
CENTRAL CUSTOM ENGINEERING
D Substantial Central Otago business
D Smart product designs: Custom made vehicle & agricultural products & general engineering
D Servicing national markets through dealer network, & local alloy light fab. engineering
D Capacity to grow
Alexandra
For Sale By Enquiry
Quality Substantial Central Business, National Markets
Call now to find out more!
www.bayleys.co.nz/64285
Nick LucasM 020 477 6778 [email protected]
D Highly skilled staffD Impressive books: Strong Sales, Profit
D Business structure & systems in place
D Your next business OR D Idea launching pad for city based business into region's lucrative economy/phenomenal business opportunities
BD
752
7
Looking tolease anindustrialproperty?Look forTrue Value.03 343 0600 mbook.co.nz
MB
745
9
4 | May 2017 — www.machineryseller.co.nz
CAD CAM SOFTWARE
FROM 2D, SHEET METAL, THRU ASSEMBLY & SURFACE MODELLING TO 5AXIS CAM. AMAZING COMPETENCY, AMAZING VALUE.Users throughout NZ PRO CAD & 3AXIS CAM under $10kwww.zw3d.com for free trial. CALL Paul Smith on 09 431 8359.
MECSOFT 2017 VISUALCAM & RHI-NOCAM & CAM PLUGIN FOR SOLID-WORKS 2017 VERSION RELEASED !New 4th axis drive-surface milling, enhanced feature recognition ca-pabilities and additional milling methods.www.mecsoft.co.nz [email protected] Ph 021 364 825
THE CAM SOLUTION FOR SOLIDWORKSDesigned to generate the smoothest toolpaths possible resulting in reduced machining time, improved surface quality, less tool wear and extended machine tool life. Contact us (09) 302 4028 or (03) 366 7021 www.hsmworks.co.nz
Established Small Business in this booming lifestyle location. Primar-ily producing and installing Water-ways Jetties with other marine and boating fabrication work as a sup-plement. Ongoing workload with contracts in place. Great potential for further growth. Would best suit an owner/ operator with an engi-neering background.$160,000 call Dale 027 4756 726 or email [email protected] for more details
THE PERFECT BUSINESS - LOOKING FOR THAT PERFECT BUSINESS? WELL IT DOES EXIST AND THIS IS AS CLOSE AS IT COMES!Low overheads, no staff, and easy to run, with 16 years of service and brand position, this home-based business just makes it easy for their customers to come back again and again.Servicing the wider Welling-ton region by supplying industrial consumables to a variety of indus-tries, the current owner calls on cus-tomers regularly and the orders just keep coming!There is also scope to increase the current range, and the e-commerce site generates further income from customers nationwide.Upside exists to take this business nationally and really grow revenues. Current owners have enjoyed 16 years of solid returns with the busi-ness working to fit their lifestyle. Owners are heading home and have instructed us to find a suit-able buyer who thrives on people interaction and believes service is everything.This business foundation is exactly that! Great cashflows, consistent revenues & relatively low stock holdings.Investment required to secure this Business $375,000 Plus gst (If Any) SDE (Surplus Discretionary Income) 2016 - $182,753Stock on Hand - $30,000 Circa E mail Broker for Information Mem-orandum You will be required to sign a Confi-dentiality Agreement.Mike Lovell 0274 356 007 - Call [email protected]
NEED GANTRY? MIDDLETON, CHRISTCHURCHQuality Industrial Premise-Com-plete with 6T Gantry.Unit A, 220 Annex Road comprises a modern industrial premise promi-
www.prosoft.co.nz
Are you using Mastercam?
Faster Workflow.
Enhancing Your CAM Investment.
Complex Machining Made Easy.
P 7
505
BB
751
3
Ph: (09) 274 6186 Email: [email protected]: www.leabourn-rose.co.nz
Facebook: www.facebook.com/LeabournRose
The Bridgeport V710 CNC machining centre is a lightening quick, extremely compact yet rugged machine. A popular choice for start-ups or first time CNC users is the Siemens 828D controller with ShopMill® 2D graphical programming at the controller interface.
The Hardinge TALENT® series machines come in 3 configurations:Short Bed – MY (Milling/Y Axis); Standard Bed –MYT (Milling/Y Axis / Servo Tailstock) –or MSY (Milling / Sub Spindle/Y Axis). The unique collet-ready main and sub-spindle design will increase part accuracy and improve surface finish.
The Bridgeport V480 automatic pallet changer
(APC) is developed forapplications that require
speed, accuracy as well as high volume. Rapid
traverse rate of 36m/min X, Y, Z and acceleration
rates of X: 6m/sec², Y: 4.6 m/sec²,
Z: 3.75m/sec²; 9 sec pallet change time.
LR 7
510
TD DOUBLE FOLDER FAST, PRECISE AND FLEXIBLE
275°
Available in lengths: 3,2 / 4,2 / 6,4 / 8,2 / 10,0 / 12,0 m and capacities*: 1,25 / 1,50 / 2,00 mm (*At 400 N/mm2)Picture: TD 150 - 6,4 m
2 Carpenter Rd . Auckland . Phone: 021826324 . www.thalmann.co.nz
TE
753
4
nently positioned on a high profile and high exposure road.The warehouse/factory space offers great versatility with a generous 8m stud height and in addition the warehouse bay is equipped with a 6 tonne gantry crane, containerheight door, and separate well-ap-pointed office space with great staff facilities.Approximate floor areas;Warehouse - 980.76sqmOffice and Amenity - 177sqmMezzanine - 63sqm
Total - 1,220.76sqmUnit B is now leasedContact the sole agents for further information and your inspection today - properties of this calibre, with these outstanding features are seldom found.Call Nick O’Styke 027 696 9801 or 03 375 4803Whalan and Partners Ltd, Bayleys, Licensed under the REA Act 2008
BUSINESS WANTED
LOOKING FOR CONFIDENTIALITY, BUSINESS KNOWLEDGE, EXPERI-ENCE, A STRONG NEGOTIATOR a business Broker who is a spe-cialist in manufacturing and import distribution? Call Basil at LINK Busi-ness Broking to discuss your busi-ness opportunity. 0224 “live it” (5483 48).Call Basil (09) 555 6021 cell 0224 5483 48 [email protected]
BUSINESSES FOR SALE
E T ENGINEERING WAS ESTABLISHED 20 YEARS AGO SPECIALISING IN STRUCTURES/ BUILDINGS, TRAILERS, TOW BARS, INCLUDING EXTENSIVE PLANT AND MACHINERY MAINTENANCE AND SERVICINGwell established brand with a strong reputation for quality workmanship and service with an experienced team of six engineers plus the owner. $295,000 plus stock and work in progress. For more information contact Reece Forbes. Bayleys Nelson 027 229 0026 or 03 546 3565
MARINE FABRICATION WHITIANGA
www.machineryseller.co.nz — May 2017 | 5
Laser welding with the TRUMPF TruLaser Robot.Efficient, versatile processing.
Satisfy the most stringent visual and quality demands even for small production quantities.
The TruLaser Robot from TRUMPF is the ideal tool for your manufacturing needs. Laser
welding ensures high precision and productivity, and delivers completely sealed, pore-free
results. TRUMPF is a one-stop shop for the perfect solution, providing assistance from
design to production. Implement the future, now.
www.trumpf-machines.com
Aotea Machinery Ltd Contact Colin Brown • Phone 09 525 6907 • Mobile 021 271 0921
10E Maurice Road, Penrose 1061 • Auckland • www.aoteamachinery.co.nz
Our laser seams would look stunning. If you could see them.
AM
753
0
See us at Stand 44
AM
753
0
6 | May 2017 — www.machineryseller.co.nz
CNC ACCESSORIES
CNC CONTROLLER BATTERIES AND PARTSWhen was the last time you changed your controller memory batteries?Total CNC carry batteries and can offer service support for most CNC machine tools and controller systems.Fanuc, Mitsubishi, Fagor, Siemens and others.Contact us now for your battery and service requirements.09 274 5890 or [email protected]
TOP IN CNC COMMUNICATION SOFTWARE2ND TO NONE CALL 021 725 797 OR 07 959 2012 FOR A FREE QUOTE FOR MORE INFORMATION VISIT WWW.CIMCO.COM
CNC MACHINES
CNC KONDIA POWER MILLKondia K-600 power milling machine. 3 phase, full Heidenhaun CNC control, can also be used as a manual milling machine, power traverse on knee. Lots of books and programming manuals. Some spares parts. Some tooling.This machine was in PDL tool room from new and has been in my tool room for the last 10 years. Still goes well.$15,000 ono call Pete 021 147 5060
HOWA(NOW OKUMA) CNC LATHEThis lathe was originally fitted with a Fanuc T5 controller which became expensive and hard to keep running. Our first one of these machines we scrapped, and kept useful spare parts, when we bought another. We enjoyed using this machine with its standard center lathe construction, hydraulic tailstock and 8 station tool posts. So when this controller gave us trouble we decided to do a retrofit. This lathe spent the first part of its life in a technical college, before we got it. Since we have had it, it has been used on small runs and tool making type work, so the
SAHINLER IRONWORKERS• well engineered, robust and built to last• a large range of sizes available
WE ALSO SUPPLY REPLACEMENT• Punches & Dies• Shearing Blades• Notching Blades
For most brands of Ironworker machines
Engineering Machine Sales LtdPhone 09 579 2371 www.emsmachine.co.nz
EM
750
9Also Suppliers of Press Brakes, Laser-Water Jet-Plasma Cutting Machines, Pipe and Tube bending Machines, Hydraulic Folders, Press Brake Tooling, Power Presses, Band Saws and Cold Saws, Plate & Section Bending Rolls, Guillotines.
Section and Pipe Bending Machines
PRESS BRAKE TOOLING
sahinlerPipe and section bending rolls.Large range of sizes available
PK 35
Phone 09 917 3770 email [email protected] Website www.ppt.co.nz
Trade in? Trade up?
Yes a GEKA for a GEKA Featuring the Bendicrop 60 that offers an additional bending station with 150x10mm capacity and the mighty Hydrocrop 80SD
Have you ever lost out on work because your machine did not have the grunt? Have you grown and your GEKA is playing catch up? We are offering a trade in on all our stock machines.
Call us now for a great deal
ID 7
512
GEKA for a GEKADATE
F 09 634 5008E [email protected]
www.commErciAlmETAls.co.nz
09 634 5450
DATE
F 09 634 5008E [email protected]
www.commErciAlmETAls.co.nz
09 634 5450
RECYCLE YOUR METAL
WITH US!
TRY OUR SERVICE – OUR CUSTOMERS LOVE IT!
100% NZ Family Owned & Operated
CM
751
9
hardened bed ways are not worn. Though basically a chucking lathe, it has a 38 mm spindle bore (less with hydraulic chuck fitted) and can be programmed to use a stock puller and open close jaws.The Centroid retrofit is 2 years old, Version 3.11. This is currently being fitted to new machines, being sold at this time. It comes with constant surface speed, and intercon (intui-tive), at the machine programming system. Or it can use off machine CAM programming with standard G-code. All electronics are new, driving the original X and Z motors. The machine comes with 3-jaw, 4-jaw, and hydraulic chucks, lots of tool holders, soft jaws, drill holders and an off tool setting fixture. Also there are lots of spare electric and mechanical parts, including a complete Head Stock, Hydraulic unit, drive motors, encoders, suds pump, tool post spares and lots more. Machine comes with Howa manuals, and Centroid manuals and operator manuals.$19,500 ONO - viewing welcomed call Collin 022 102 3225
COILS
COIL SPRINGS MANUFACTURED AND DESIGNEDArchers Springs are specialists in coil spring manufacture using mate-rial from 10mm - 36mmPhone 07 3480169 or Email [email protected]
COMPRESSORS
ATLAS COPCO GA22KW120cfm silenced cabinet & inte-grated aftercooler $5,500 with parts and instruction manuals Ph: 021.120-7010 ALSO: 42cfm 10hp Broomwade on tank
COMPRESSED AIR DRYER - NEW 1/2 PRICE SURPLUS ASSETRefrigerated 1,000 cfm (30 m3/min @ 7 bar). German manufac-ture. Power 3.1 kW. Pressure dew point +3 degrees cent. Wt 700 kG. Surplus asset offered $18,500 excl gst ex stock Auckland. Ph John 021 120-7010
CONVEYORS
CONVEYOR PROBLEMS ?? RUSSET ENGINEERING IS HERE TO HELP.A recognised leader in Conveyor, Transmission, Industrial Hoses and Products since 1986. New belts in-cluding full install services. Replace-ment belts. Belt repairs and mainte-nance. Branches thru out the contry. www.russet.co.nz 0800 RUSSET
CUTTING TOOLS
DIAMOND WHEELSAll types and sizes to sharpen tung-sten carbide tools. Technical advice and catalogue available.LINBIDE TOOLS Ph 0800 546 243 www.linbide.co.nz
DIE-CUTTER
26”X36” CROSSLAND VK CUTTER & CREASER TXEautomatic and hand fed. 890mm x 640mm ID chase. Original machine, reconditioned and sourced from UK approx. 10 years ago. Now surplus to require-ments. This machine has given no trouble, is in great working condition, avail-able immediately with an assort-ment of dies supplied by Night Owl Cutting dies in Feilding NZ. A rare find for a niche market. $8,000 ONO Phone Jim to call and discuss - 021 228 2616
DRILLS
GLOBAL RADIAL ARM DRILL 1600MM ARM 5MT 50MM CAPACITYc/w vice 3 phase, was $8,250 + GST now $7,000 + GST, other drills available new & used MacDonald Machinery, Ph 0800 Machine, [email protected], www.machine.co.nz
RADIAL ARM DRILL, HMT RM63, 2M ARM5MT taper complete with Box table and coolant, Big machine. Priced to sell Ph 021 920 700 or 09 274 4058
SI 7
517
Ray White Commercial Christchurch (* approx)
Addington, ChristchurchVendor Wants Sold!
Engineering warehouse/workshop of 411m2* with a further 135m2* office/amenities/mezzanine/storage. Former home to Shape Technologies. Tidy unit that would suit an owner occupier or an astute investor. Vacant possession.
Russell Pegler021 053 5792 or 03 379 [email protected] ID# CCM23314Raine Blackadder Ltd MREINZ Licensed (REAA 2008)
SaleBy Negotiation + GST (if any)
RB
754
3
Container Sales, Hire & ModificationsWe have new and used stock available in all sizes Nationwide
We can deliver anywhere in NZ
CONTACT US FOR A QUOTE TODAYP. 0800 818 818 E. [email protected] W. www.nzbox.kiwi.nz
NZ
753
3
The marketplace for engineering machinery
www.machineryseller.co.nz — May 2017 | 7
Specifications & Prices are subject to change without notification. All prices exclude GST and valid until 31-05-17 04_M
S_0
1051
7
2 Waiouru Road, East Tamaki 2013Ph: (09) 2717 234
VIEW AND PURCHASE THESE ITEMS ONLINE AT
www.machineryhouse.co.nz/MSMAY1
PAPERLESS WARRANTYTRACK YOUR ORDERSEXCLUSIVE OFFERSLATEST RELEASES
ONLINE PROMOSCLICK & COLLECTCOMPETITIONSNEWSLETTERSwww.machineryhouse.co.nz/signup
$70 FREEDISCOUNT VOUCHERS$70 FREEDISCOUNT VOUCHERS$70 FREEDISCOUNT VOUCHERS$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE$70 FREE
RIGHT TOOL
FOR YOUR
JOB!
TIPRIGHT TOOL
FOR YOUR
JOB!
TIPTIP
MSMAY1ONLINE OR INSTORE!
UNIQUE PROMO CODE
- JAMESStaff Member
MetalWorking
Sheet MetalFabrication
WoodWorking
Workshop & Automotive
LiftingHandling
Cutting Tools
Machine ToolAccessories
MeasuringEquipment
SpareParts
THE INDUSTRY ’S CHOICE!
GHD-50Geared Head Drill• 4 morse taper spindle• 50mm drill capacity• 240mm spindle travel• Automatic drill feeds • Motorised rise & fall table• Table tilts ±45º & rotates 360º• 3kW / 4hp, 415V motor• Includes coolant pump,
light & drill chuckOrder Code: D178
$6,890SAVE $560
BS-13DSSemi - Automatic, Swivel Head-Dual Mitre Metal • 458 x 235mm capacity• Double mitre head to 60º • Hydraulic vice with
adjustable pressure• Blade breakage sensor• Variable blade speed system• 1.5kW / 2hp 415V motor
Order Code: B030
$9,100SAVE $650
MB1250Magnetic Panbrake • 1300 x 1.6mm capacity• Electromagnetic clamping• No limitation to depth of boxes• Automatic clamping and unclamping• Open end allows complex shapes• Quick & accurate bend angle guide• Includes standard, slotted, narrow
& segmented clamp plates• 240V, 10amp
Order Code: S542
$3,100SAVE $300
PR-133Motorised Plate Curving Rolls • 1300 x 2.5mm capacity• Initial pinch for pre-bending• Two rolls powered
by gearbox drive• Safety wire interlock system • Precision ground rolls with wiring• Includes conical
bending guide roller• 1.5kW / 2hp, 415V motor
Order Code: S761
$5,100SAVE $1,420
PR-134Motorised Plate Curving Rolls • 1300 x 4.5mm capacity• Initial pinch for pre-bending• Two rolls powered by gearbox drive• Safety wire interlock system • Precision ground rolls with wiring• Includes conical bending guide roller• 2.2kW / 3hp, 415V motor
Order Code: S7615
$5,900SAVE $1,590
Order Code: Q115
$300SAVE $78
Z3050x16Radial Arm Drill• 50mm drilling capacity• 5MT spindle taper• 16 spindle speeds (25-2000rpm)• 16 auto feeds (0.04-3.2mm/rev)• M36 thread tapping capacity• Hydraulic feed & spindle
drive system• 350-1600mm spindle to column• Includes box table 620x500x500mm• 4/5.3hp, 415V motor
Order Code: D166
$15,500SAVE $2,100
PB-1030Hydraulic NC Panbrake• 3050mm x 3.2mm bending capacity• NC-89 digital single angle programmable control• NC-89 controlled opening height & dwell timer• Quick action rapid head adjustment• Extended fingers allows
bending deep pans or boxes• Heavy duty steel
fabricated construction• 5.5kW / 7.5hp, 415 motor• Includes an adjustable
rear manual backgauge
Order Code: S585
$15,900SAVE $2,000
IW-80SHydraulic Punch & Shear• 80 tonne capacity• Dual independent operation• Five work stations• Punch: ø26 x 22mm• Shear plate: 460 x 15mm • Shear angle: 152 x 152 x 13mm• 7.5kW/10hp, 415V motor
Order Code: P175
$17,400SAVE $590
Order Code: G220
$8,500SAVE $1,398
SG-820HHydraulic Surface Grinder• 530 x 220mm table travel• 400 x 200mm magnetic chuck• 0.1mm vertical graduations• Hydraulic longitudinal table travel• Manual lubrication pump• Cast iron machine body• 1.kW / 1.5hp, 415V motor• Includes wheel balancing stand and
arbor, diamond wheel dresser & work light
HPK-60Section & Pipe Rolling Machine• 70 x 70 x 7mm angle capacity• High quality hardened rolls• Horizontal or vertical position• Three rollers are powered• 1.5kW/2.0hp, 415V motor• Includes curving rolls and
guide rolls• Made in Turkey
Order Code: S753
$14,500SAVE $1,500
20-115Outside Micrometer Set• 6 piece set 0-150mm range• 1 x 0-25mm• 1 x 25-50mm• 1 x 50-75mm• 1 x 75-100mm• 1 x 100-125mm• 1 x 125-150mm• Carbide tipped anvils• 0.01mm accuracy
BM-52VETurret Milling Machine• NT40 spindle taper• 3 Axis digital readout• Variable speed, 50-3750rpm• 1370 x 254mm work table• Square slideways Y & Z-Axis• Turcite B coated slide-ways• Powered Z-Axis travel• 3.75kW / 5hp, 415V• Includes machine vice
& clamp kitOrder Code: M596D
$11,600SAVE $400
HG-1040BHydraulic NC Guillotine• 3100mm x 4mm cutting capacity• Ezy-Set NC-89 Go-To
digital backgauge• 9Crsi blades for stainless steel• Shadow line lighting• Rapid blade gap adjustment• Safety photo electric rear
guarding beams• 7.5kW / 10hp, 415V motor
Order Code: S929
$15,500SAVE $2,450
PB-40AHydraulic NC Pressbrake• 44T x 2000mm pressing capacity• Estun NC-E21 2-Axis
programmable control• Hardened ballscrew backgauge• Segmented 35° top punch• Multi vee solid bottom die block• Intermediate clamps
with safety key• Adjustable steel sheet supports• 4kW / 5.3hp. 415V motor power• Includes safety guarding system
Order Code: S970G
$21,500SAVE $1,600
DASHIN CHAMPION 1550Centre Lathe• 390 x 1250mm capacity• 2 axis digital readout system• 55mm spindle bore• D1-6 camlock spindle• 270mm wide induction
hardened bed• Metric & imperial thread cutting• 16 spindle speeds (25-2000rpm)• 5.5kw/7.5hp, 415V motor• Includes 3 & 4 jaw chucks,
faceplate, steadies, light, foot brake & coolant systemOrder Code: L254D
$21,000SAVE $998
Machinery Seller | Published 01-05-17
PO #8677 | Sent 00-04-17
MH
751
4
8 | May 2017 — www.machineryseller.co.nz
ENGINEERING SUPPLIES
LENOX BAND-SAWS, STARK HSS COLDCUT SAWS, SYNTOL CUTTING LUBRICANTSFor all your engineering require-ments Phone: 09 5792007E-mail: [email protected]: www.thode.co.nzMention this advert and get 15 % discount139 STATION RD PENROSE 09 579 2007141 ST ASAPH ST CHRISTCHURCH 03 365 3690316 TE-NGAE RD ROTORUA 07 348 8708
ENGINEERING VACANCIES
LOOKING FOR ENGINEERING STAFF ?? APPOINTMENTS RECRUITMENT SPECIALISTS CAN HELPAppointments have Sheetmetal Tradespeople, Welders, Plastic Die Setters & Operators, CNC Milling Machine Setter Programmer Op-erators, Fitters & Turners, CNC Press Brake Operators, HVAC etc., Appointments Recruitment Special-ists, Engineering Trade Recruitment. Ph 478 9954 or 021 888 500 Mention Machinery Seller and get 10% discount (conditions apply)
FASTENERS
FOR ALL YOUR FASTENING RE-QUIREMENTS.Bolts, Nuts, Washers, Screws, Rivets, Lifting & Rigging gear, Custom Threading, U Bolts, Eye Bolts, Masonry Anchors,Stainless Fasteners, Socket Product, structur-al bolts,Threaded rod, High Tensile Bolts & Nuts, Mild Steel Bolts & nuts, Lanotec, Lubricants and many more. Check out our great website. www.Steelmasters.co.nz or Phone 0800 265 2142 [email protected]
FORKHOISTS
CERTIFIED LOADING RAMPSStd ramps 6 mm chequer plate top rated to 5 ton axle load,all under structure corten corrosive resistant steel, made to order service available. Contact Secureaload 0800 100 449
GENERATORS
YOUR TRUSTED INDUSTRY PARTNER SINCE 1932-NZ distributer for a wide range of quality European brands including FPT IVECO / INMESOL / SINCRO and others.-6 - 2000kva-Available in open / silent and rental specification configurationsPh: 09 299 6019Email: [email protected]: www.leesgroup.com
PACE POWER & AIRNZ DISTRIBUTORS FOR JCB POWER PRODUCTS AVAILABLE EX STOCK. JUST OPENED NEW BRANCH IN HAMILTON !• 6kVA - 3300kVA• Fuel Efficient JCB Dieselmax Engines• MeccAlte Alternators• Deep Sea Controllers• Technical Support• Super Silent Operation• Smart Design • Heavy Duty CanopiesPh: 06 759 8014 - New PlymouthPh: 07 847 7343 - HamiltonPh: 027 429 1365 Email: [email protected] Web: www.power-air.co.nz
GRINDERS
OKUMA GCU UNIVERSAL AND CY-LINDRICAL GRINDERSwing 400mm x 1000mm between centres2 x internal grinding attachmentsQuality machine in good condition$6,995+gstwww.coastalmachinery.co.nzPh 0274 424 915
Yes - we buy and sell quality engi-neering and wood working machin-ery.
STANKO BRAND SURFACE GINDING MACHINE. MAGNETIC TABLE SIZE - 320MM X 900MMGrinding Wheel dimensions-Max. outer dimension 450mm-Min. outer dimension 325mmInner diameter 203mmWheel width 63mmTraverse movement of grinding wheel - 500mmMachine dimensions 3410mm x 2020mm x 2290mmMachine Weight - approx 7.1 metric tonsComes with three brand new wheels and one Aliminium wheel.It has an extraction unit and wheel balancing.$19,500 ONO - viewing welcomed call Collin 022 102 3225
SURFACE GRINDER - ELLIOTT 618 PRECISION TOOL ROOM GRINDER - PRICE REDUCED1979 - is in good condition for age. Table size - 360mm x 150mm and can take maximum table size of 460mm long. Auto back and side feed. Manual height adjustment. No manuals. Viewing in Takanini welcomed. Looking for $5,900 ONO call Phil 09 298 3266
GUILLOTINES
DYE HYDRAULIC GUILLOTINE 10FT (3MM X 3019MM) MOTORISED BACK GAUGEc/w digital controller - other guillo-tines available new & used MacDon-ald Machinery, Ph 0800 Machine, [email protected],
TIDY MACHINE, THIS WAS CUTTING LIKE FORMICA TYPE SHEETS & VENEER.Ex-Alloy Yachts. Viewing welcomed call Craig 0274 901 543
HYDRAULIC POWER PACKS
REXROTH HYDRAULIC POWER UNITHydraulic Power Unit 200 LPM 75Kw Electric Motor Electric Oil Cooler Huge Tank A10V Variable displacement hydrau-lic pump Complete Power Unit built by Rexroth Hydraulics in Auckland $11,000 ONO call Walter 027 281 7492
HYDRAULICS
HYDRAULIC PUMPS 10,000PSI JACKS, RAMS, VALVES, GAUGES CRIMPING, PUNCHES, TROLLEY JACKS, TORQUE WRENCHES, BOTTLE JACKS, HAND PUMPS,HYDRAULIC TOOLS.SALES,HIRE, SERVICEPh 09 636 2264 www.hytoolsnz.co.nz
PL
7537
K3000 Cantilever, HT2000 Hypertherm plasma cuts up to 32mm mild steel. Oxy/fuel torch will cut 100mm plus. Servo drill for pierce holes and spot drilling.
2 x water tables 6.2m x 2.9m (12.4m total length). PRICE REDUCED $69,000 ex GST ONO
Kinetic CNC plate cutting machine
Call Craig 07 849 4491 Mobile: 027 414 1628
AR
752
0
Features include: Max cutting 1mm to 16mm, Max cutting length 3200mm, 7600mm back guard travel, flip up at end NC Control , Rapid blade gap adjustment, Shadow line for cutting to
scribed line, Rear Safety guard with light barrier, Front and side guards Siemens electrics, Rexroth hydraulics, High quality blades, Motor power
18.5kW, Machine weight: 11.5 Tons, Dimensions Length 3945 mm Wide 2235 mm Height 2000 mm, 12 Month Warranty Machine available from Christchurch, $59,000 ONO
Hydraulic Guillotine Cuts up to 16mm thick
Call Andrew 03 349 6012
MR
753
8
www.machinesrus.co.nz 09 820 9486
Mecal SW 553 Plug - The ultimate double mitre saw
MACHINES ‘R’ US LTD
FITTER WELDER
[email protected] - 027 648 8488
WANTED
If you have the skills for this role together with an excellent work ethic, a proven history of reliability and punctuality then please send a cover
letter together with your CV now to:
ATTRIBUTESMig welding and Fabrication experienceFitting ExperienceAbility to work unsupervised as well as being a good team playerProduce work of high quality with good attention to detailAble to work across multiple sites and variety of industries
RESPONSIBILITIESInspecting and reportingService and maintenance of equipmentPlant installation and upgradesFault finding and diagnostic skillsSteel and Alloy vessel welding repairsFabrication and working from plans
Skookum is a great place to work, with the best people in their field which are
rewarded for the job they do.
This vacancy comes with an attractive wage and will be based from our Auck-
land workshop, however will include site work in the bulk handling industry.
Skookum Technology is one of New Zealand’s leading engineering service providers offering engineering and ser-vice solutions throughout New Zealand
and Australia.
SK
752
3
HeSaCo PUBLISHING Wall Planner Advert
Proofing Sheet
CALENDAR NAME: General Engineers of New Zealand 2010Advert Number: 19Proof Number: 1
PLEASE CHECK THIS PROOF CAREFULLY this is urgent please sign and fax back ASAP
(eg. check that company names and details are spelt correctly etc.)
Proof correction/alteration checklist:
1..........................................................................................................................................................
2...........................................................................................................................................................
3...........................................................................................................................................................
4...........................................................................................................................................................
5...........................................................................................................................................................
6...........................................................................................................................................................
Please note that corrections are errors and or omissions that need to be corrected. Alterations are things added or changed
from the original brief. Signed approval implies acceptance of terms as per 'Confirmation of Advertising Sheet' contract.
Approved with corrections: ............................................................................................................... signature date
Make alterations and reproof:........................................................................................................... signature date
Approved to print:........................................................................................................... signature date
HeSaCo PUBLISHING FAX: 03 374 5344
O 7
516
Tel 09 570 7025 [email protected]
Use Filtermist units to prevent coolant mist escaping from your machines and polluting the workshop and harming the operators. For full details
contact: Piquet Machinery Ltd 027 204 9901 E: [email protected] www.piquetmachinery.co.nz
PM
750
7
OIL MIST FILTERS
Coolant mist is a health hazard
GET IT SORTED!!
A machine this good at this price?
Spindle manufactured in-house.
Mating surfaceshand-scraped.
Servomotor mountings cast in place.
0800 85 87 84www.icnc.co.nz
Oversized ball screws.
• 12,000 RPM• Rapid Feed Rate 48/48/32 (X/Y/Z)
• Travel 1020/520/540 (X/Y/Z)• 500kg max table weight
In-stock now, priced from $123,000 +GST
YCM NXV1020A Vertical Machining Centre
It must be a YCM.
IC 7
532
Press Brake Dye 75 tons x 3100mm, c/w power back gauge
Full set of Tooling, Nice machinePh, Simon on 021 920 700 or 09 274 4058
LM 7
553
$26,500+GST
New Harrison Alpha 1400XS Manual/CNC
lathe, complete with 8 station turret
Chucks, all Alpha software, Ex stock ready for work.Finance available.
Phone Lucas Machinery Ltd, Colchester / Harrison agents.09 274 4058 or 021 920 700 or email [email protected] LM
755
2
www.machineryseller.co.nz — May 2017 | 9
TZ LONG FOLDER INNOVATIVE, POWERFUL AND EFFICIENT
2 Carpenter Rd . Auckland . Phone: 021826324 . www.thalmann.co.nz
Available in lengths: 3,2 / 4,2 / 6,4 / 8,2 / 10,0 / 12,0 m and capacities*: 1,25 / 1,50 / 2,00 / 3,00 mm (*At 400 N/mm2)
275°
Picture: TZ150 - 6,4 m
TE
753
5
JOBBING WORK WANTED
5 AXIS CNC MACHINE SHOP IN RAN-GIORA, CHRISTCHURCHFull Cad design facility if requiredHigh complexity CNC for fast deliv-ery of prototypes & small produc-tion runs.Phone 021 720 [email protected] www.sprintcnc.co.nz
LASER CUTTING & CNC PRESS BRAKE FOLDING UNDER ONE ROOFPrecision Laser Cutting provides a specialised laser cutting & cnc folding service for steel, aluminium and non ferrous metals.To find out more about us call Steve 09 270 3702 www.precisionlasercutting.co.nz
FROM LARGE TO SMALL, 150 WATTS TO 40 WATTwe will help find the right laser for your requirements.• We can install, setup the software and train you• We carry all parts and can provide a spares kit• We do demonstrations• Free requirements assessmentEmail [email protected] or give us a call on (09) 432 8596 or 0204 057 0493
LATHES
GREAT TOWN WOODHOUSE LATHE.GREAT ENGLISH LATHE - BUILT IN THE TIME QUALITY WAS IMPORTANTIts 85 inches between centers (just over 2 metres). 80 mm hole in center. 3 phase motor It’s all in working order. It will come with:
Tooling, 3 Jaw chuck 4 Jaw chuck Cooling system 3 jaw chuck is 250mm with 80mm center. 4jaw chuck is 410mm. Height from bed to center is 200mm. Gap in bed is 130mm. dimensions 3.5m L x 1.2m W x 1.4m H$5,200 ONO call Maarten 027 656 6620 viewing welcomed
HARRISON 15” LATHE18 Speeds 35 ~ 1500rpm45mm Spindle boreChuck guardFull rear guardingClear Chip deflectorCoolant systemIncludes:3 Jaw chuck4 Jaw chuckFace plateFixed SteadyTravelling Steady.$5,000 + GST $5,750 including GSTCall Stewart 09 917 3770
RA
751
5
Available from: MACHINERY HOUSE (09 271 7234), MacDonald Machinery (0800 MACHINE), Chevpac Machinery (0508 CHEVPAC), Scott Machinery (0800 215 215)
www.bulldozerbender.com
Already got a bulldozer?New accessories available!Reinforcing bar benderPneumatic wheel kit25 & 40mm RHS formers65 & 75mm pipe former!updated tube benderSG iron formers 15 - 50mmBeam straightening jigSheet metal folder 300x3mmRange of pipe notchersLength stopCustom jigs available on request.
Over 4,000units proudlymade in NZ
LE 7
526
1.6 meter automatic turn table, can also be used manually complete unit with cyclone, filters and medium
$12,500 ONO
Shot/Peen blaster. Ex Air NZ.In very good working order
For viewing contact Ron Sluiters on 0274 947 442
MATERIALS HANDLING
NZ MADE QUALITY SCISSOR LIFTSCustom made for numerous ap-plications. 100-20,000 kg capacity. Hydraulic; fixed or mobile; various deck and finish options; low main-tenance, made to last the distance. For further info Ph (09) 818 4670, sa les@roseeng ineer ing .co.nz , check out our updated website: www.roseengineering.co.nz.
SCHMALZ VACUMASTER - MOVE HEAVY LOADS WEIGHING UP TO SEVERAL TONS ERGONOMICALLY AND SECURELYthe VacuMaster allows workpieces to be handled effortlessly by just a single operator while protecting the employeeís health. For example : Loading and unloading CNC laser cutting machines with metal plates.Loading and unloading CNC ma-chining centers with wooden boards
or plastic sheets. This is German quality at it’s very best - built to last. www.schmalz.com OR contact Au-tomation Equipment on 0800 847 200 or e-mail [email protected] to arrange a meeting.
THE VACUUM TUBE LIFTER JUM-BOFLEX ALLOWS YOU TO MOVE LIGHTER GOODS UP TO 50 KG ERGO-NOMICALLY AND WITH HIGH CYCLE RATESThe control handle fits comfortably in the hand and allows the opera-tor to work for a long period of time without fatigue. With simple one-finger control, lifting, lowering and releasing the load is extremely intui-tive. The JumboFlexi’s wide range of features allows it to tackle virtually any task. It comes standard with a quick-change system for replac-ing the suction pads. Workpieces which are gripped from the vertical side automatically swing back into the horizontal position where they can be continuously rotated. This is German quality at it’s very best - built to last. www.schmalz.com OR contact Automation Equipment on 0800 847 200 or e-mail [email protected] to arrange a meeting.
PRESSING AHEAD OF THE RESTAjax are specialists in metal press-ing, supplying quality at the right price, Small or large production runs, specials, design, tooling and general engineering and wirecut-ting. EST 1962. www.ajaxproductions.co.nz 09 827 6926
SPECIALISTS IN DESIGN, PROTOTYP-ING AND CNC MACHINING.We cater for production runs, one offs and full assemblies in a wide range of ma-terials.www.redwoodengineering.co.nz09 625 8832
LASER
BODOR CO2 LASER CUTTING AND ENGRAVING MACHINESFull range of sizes and options. Na-tionwide support with over 20 years experience with lasers.www.bodorlaser.co.nz [email protected] Ph 021 364 825
BODOR FIBRE LASER COMPACT -FULLY ENCLOSED VERSATILE AND COMPACT FIBRE LASER PROFILE CUTTERfor smaller metal panels and prod-ucts.IPG or MAX Laser power options 500 to 2000 watts. 500 x 500mm, 1300 x 900 and 1500 x 1000mm bed sizes.Small part collection system, WiFi, Panasonic servo drive ballscrews, Swiss lens head.www.bodorlaser.co.nz [email protected] Ph 021 364 825
BODOR LASER FIBRE LASER CUTTING MACHINES - COST-EFFEC-TIVE FIBRE LASER MACHINES WITH IPG OR MAX POWER OPTIONS FROM 500 TO 4000 WATTS.Options include exchange tables, multi-tray loading systems, tube-cutting attachments, safety screens or full enclosures.Swiss design and lens componen-try, 3 year factory warranty, full service and support nationwide.www.bodorlaser.co.nz [email protected] Ph 021 364 825
10 | May 2017 — www.machineryseller.co.nz
Mostly battery rechargeable Tension measuring and test rigs a specialityRadio transmission (RF) options available. Sales, Service and Hire.Please phone / e-mail for advice onAdvasco Scales Ltd 09 8352480 or e-mail [email protected] www.advasco.co.nz
SHEET METAL MACHINERY
HEAVY DUTY WHEELING MACHINE - POWERED WHEEL -EX ALLOY YACHTS - A RARE FIND !!Alloy Yachts International - made in New Zealand Comes with:• Extra forming wheels. • Hydraulic bottom wheel feed with adjustable speed. • Hydraulic top wheel raise and lower. • Control gauges for feed and down-ward pressure. • C-frame also has hydraulic tilt control. A number of spare forming wheels, of different shapes and sizes come with the machine & have the follow-ing dimensions - • 310mm diameter with 60mm wide radiused rim. • 230mm diameter with 25mm wide flat rim • 210mm diameter with 25mm wide flat rim • 310mm diameter with 50mm wide flat rim The trolley, that carries the spare wheels, is included overall length of the machine 3.5 metres. Dimensions: Length 2800mm x Width 1930mm x Height 2800mm Weight: ~ 2205kg $12,000 ONOCall Ross 09 412 8655 or 027 282 7689
SHEET METAL TOOLING
THE BEVEL MITE PREMIUM TOOL IS PERFECT FOR BEVELLING OR PUTTING A RADIUS ON CS, SS OR ALUMINIUMLightweight, palm size 25,000 rpm pneumatic motor.Calibrated for precise depth adjustment. Ex stock from PME Supplies Ph (09) 419 8335 or 0274 923 697www.pmesupplies.co.nz
RA
752
9
Choose the safe option. Install Fiessler for occupational safety in industrial locations
www.reform-automation.co.nz Phone 0800 288 668
Complete SafetySolutions
MILLING MACHINES
KONDIA FV1 VARIABLE SPEED MILLING MACHINE, 500 - 4000 RPM R8 TAPERc/w 2 axis newall DRO power feed on x axis & collet set was $12,000 + GST now $9,000 + GST, other milling machine available MacDonald Machinery, Ph 0800 Machine, [email protected], www.machine.co.nz
PACKAGING
FILLING MACHINEAccurate, Stainless Steel. Easy to set/use. Ideal for free flowing prod-ucts at up to approx. 2.5kg bags. For a demo give us a call - Contact Geoff or Ken at Advasco Scales on 09 835 2480. For Sales, Service and Hire - The Weigh to Excellence or e-mail [email protected] www.advasco.co.nz
PRESS BRAKESPRESS BRAKE & GUILLOTINE REPAIR AND MAINTENANCE hydraulic and mechanical, also new guillo/shear blades available - Call Tony Warren Engineering 0274 997 628
ROBOTICS
MOTOMAN ROBOT TRIMMING CELL FOR SALEMotoman MH 50-35 Robot as new. Payloads: 50kg; Standard (MH50) 35kg; Long Reach (MH50-35) Buy cell or just Robot.Set up for trimming plastic products in a multi bay cell. Could be used for any product or material or for assembly. 7 bay cell. Able to run 7 cutting programs simultaneously each with all the safety features you would expect. Robot identifies part through program and trims accord-ingly. Offline program by manually moving robot and recording. Very easy to program and operate. Set up to check shrinkage before trimming flashing. Before each cut the robot identifies the true size of the part then makes the cut. Selling due to a change of focus of product lines. $60,000 call Mark or David on 09 275 2144
SAWS
LINBIDE CIRCULAR SAWS HAVE DEVELOPED OVER 40 YEARS.The blades are manufactured to strict tolerances using Aisi 1080 hardened German Steel & German Tungsten Carbide tips. Our saws are designed for cutting wood, alu-minum & metal in sizes up to 500mm. We select the Tungsten Carbide tip grade to suit each ap-plication. LINBIDE TOOLS Ph 0800 546 243 www.linbide.co.nz
SCALES
CRANE AND HANGING SCALESAll sizes from 5kg or less to 200T or more.
M
achineryseller
Photo Competiti
on
SEND A PHOTO OF THE TEAM...
'MACHINERYSELLER IN YOUR LUNCH ROOM
COMPETITION'
Be creative, extra points for innovation/humour. We want to see someone reading machineryseller (MS) but the rest is up to your creative genius. We will feature the
best photo in MS and NZEN every month so don't hold back - get snapping.
Send you photos to [email protected]
The team at Chevpac Ma-chinery (NZ) Ltd was on a well earned break in the smoko room when they de-cided to win themselves five dozen bottles of Speights. Pictured are (left to right) Nick Lawlor, Sid Hollo-way, Amit Shah and Bobby Asnani. Get you entry in now for the June issue.
CHEVPAC SNAPS A PIC AND SNAGS THE PINTS BE IN TO WIN FIVE
DOZEN BOTTLES
[email protected] 021 121 2669 www.jmp.co.nz
www.
Vacuum Lift Tube Specialist Material and Product Handling
Providing Lifting Solutions For a never-ending range of Products.
• Panels. • Bags. • Boxes. • Drums. • Production Line Assembles.
Standard or Custom Designed Grippers, Jibs, Posts and Gantry Systems
JM 7
525
CC
754
8
LM 7
551
Teach Lathe, Annn Yang made in Taiwan
Model 510 x 1500Fagor controller, chip conveyer, 8 station turret, good machinePh 021 920 700 or 09 274 4058
PRICE $26,000 +GST
Machining centre, Doosan, Year 2002,Fanuc 21iM controller
1350 x 520 table, 40ISO, 4th Axis, conveyor, 30ATC, Good cheap machine.Ph, Simon on 021 920 700 or 09 274 4058
LM 7
555
SHINI GRANULATORSNew stock just arrived, including Screenless - 27 rpm.
Also have some second hand models.
MT
755
6
SPARK ERODER
SINITRON EDM SPARK ERODER. GOING CHEAP - GREAT PRICE - WE NEED THE SPACE !Very powerful, up to 60 amps Everything works. Requires set up knowledge and maintenance.Very cheap for quick sale NOW JUST $1,200 ONO !!Stored in Panmure Auckland. Ph Curtis 021 637550
SPRAY EQUIPMENT
WWW.STROUDS.CO.NZ W A Stroud Ltd is the market leader for fluid handling and coating ap-plication equipment. Our coverage includes all industrial, architectural, commercial, hazardous, and sani-tary fields.Please see our website for compre-hensive information.09-479-8860
SURPLUS PLANT
TANK ROTATOR/ TURNING ROLLS, APPROX 3 TON CAPACITY3 phase variable speed $5.000+gstwww.coastalmachinery.co.nzPh 0274 424 915Yes - we buy and sell quality engi-neering and wood working machin-ery.
TANKSSTAINLESS TANKS FOODGRADE VARIOUS [email protected] 442 944www.ibl.co.nz
TOOLING - TURRET PUNCH/PRESS BRAKE
HIGH QUALITY TOOLING FOR MURATEC WIEDEMANN TURRET PUNCHES.phone 0800 288 668email: [email protected]
www.machineryseller.co.nz — May 2017 | 11
YOUR WELDING & SAFETY SPECIALISTS ENGINE DRIVEN WELDER/GENERATORS WELDING & CUTTING CONSUMABLES
FILLER METALS AND HARD FACING AUTOMATED EQUIPMENT
ROTATORS & TURNING ROLLS USED EQUIPMENT
MACHINE REPAIR SERVICE
FOOTWEAR, EYEWEAR, HAND PROTECTIONCLOTHING & HI-VISIBILITYHEARING & RESPIRATORY
WORKSHOP SAFETY
AW
753
9
RP
754
2
Seven models and dozens of configurations. Boring diameters up to 2032mm
For more information, speak to Shane Hodge on 0272 789 562or email: [email protected]
www.climaxportable.com
Site Solutions Onsite Portable Boring Machines
For more information, speak to Shane Hodge on 0272 789 562
www.climaxportable.comP 07 578 4171 F 07 578 8061 E [email protected] Glasgow Street, Tauranga
NEW ZEALAND’S
biggestSALES & RENTAL SUPPLIER FOR
ROBERT PAGE SITE SOLUTIONS ALSO PROVIDE:
» Onsite demonstrations and training» Calder valve testing machines» Full parts and back up service
Trusted and proven high quality American made machine tools
FLANGE FACERSReface, bevel, counterbore or cut end prep configurations for welding. Easy set-up and OD or ID mounting. Seven models with machining diameters up to 120 inches (3048 mm).
BORE WELDINGBoth automated spiral and step welding systems are available. Attach to Climax boring machines to let you bore and weld with one setup or even simultaneously.
BORING MACHINESSeven models and dozens of configurations. Boring diameters up to 80 inches (2032 mm).
MILLING MACHINESHighly configurable circular, linear and key mills. Precise specifications, with easy set-up and fast metal removal.
PORTABLE LATHESDirect mount to the work piece and rotate around the shaft. Cut O-ring grooves, repair spindles, or fix gear seats with as little as 7 inches (177.8 mm) of radial clearance.
GRINDING & LAPPINGBore, turn, thread, face, machine weld preps and more using these ingenious repair tools. Select or configure for a huge variety of valves.
KEY MILLSTwo-axis and three-axis mills cut keyways, slots, pockets, or flats on shaft diameters of 1.5 to 24 inches (38.1 to 609.6 mm).
PIPE BEVELINGID mount pipe beveling tools from 1 to 12 inches (25.4 to 304.8 mm). Our smaller flange facers come with pipe beveling heads that bevel pipe.
THE CLIMAX PORTABLE MACHINE RANGE INCLUDES:PROOF
DC
750
6
ESAB E7016 TWINCOAT ELECTRODE
OK 53.16 SPEZIAL
THE ORIGINAL ESAB TWINCOAT FORMULATION FROM EUROPE
VACPAC - Vacuum Sealed To Reduce Moisture Absorbtion & Electrode Damage
Smaller Pack Sizes Reduce Waste & Cost
Smooth Running & Low Spatter For All 7016 Electrode Users
Insta
CIGWELD.COM.AU ESABASIA.COM1300 654 674 | F: 03 9474 7391 | [email protected]
OK 53.16 is a double-coated electrode combining the running characteristics of a rutile electrode with the mechanical
properties of a basic electrode. ESAB’s OK 53.16 welds on both AC and DC and the spatter
loss is minimal.
ESAB OK 53.16 Electrode
198 Springs Road, Hornby, Christchurch Phone (03) 3499 353 Email: [email protected]
www.dcwelding.co.nz
VISIT OUR SHOWROOMTO VIEW THESE BRANDS
NZ
R 7
524
Lincoln Electric Co, Cigweld, Kemppi master repair agents. On site repairs and pick up, MIG, TIG hire. Lincoln “submerged arc” welding
specialists. Spare parts. Service with knowledge. New Machine sales. For all your welding needs. Competitive hourly rates.
NZ Welder Repair Services Ltd
Call Rod Rugg 09 8261425 Unit 4 / 5 Portage Road, New Lynn, Auckland email [email protected] www.nzwrs.com
KH
750
8
• Being Summer, it is a great time to plan for the cold Winter• Hot deal for the cold Winter - Kroll Kozy used Oil Heater. Ideal for Workshops, Factories, Showroom etc, $5,500 + gst• Heating one stop shop• Proudly NZ owned and operated
Call 0800 367 576 – email; [email protected] 027 497 3551 www.krollheaters.co.nz
PLAN FOR THE COLD WINTER
Plate rolls, Sahinler, 1550 x 10mm rolling
Pre Bend 8mm model MRMS 1550/190, machine like newPh Simon on 021 920 700 or 09 274 4058
LM 7
554
DATE
F 09 634 5008E [email protected]
www.commErciAlmETAls.co.nz
09 634 5450
DATE
F 09 634 5008E [email protected]
www.commErciAlmETAls.co.nz
09 634 5450
RECYCLE YOUR METAL
WITH US!
TRY OUR SERVICE – OUR CUSTOMERS LOVE IT!
100% NZ Family Owned & Operated
CM
751
9
TUBE
WOODBRIDGE TUBE MILL. ARCHITECTURAL TUBE -Now up to 60 shapes / sizes in SS, MS, Galv, Non Ferrous. Welding and rolled bends available for all tube shapes.Quality assured. 04 568 7284, [email protected]
WELDERS
SINCRO DUAL 400AMP WELDER / 10KVA 3 PHASE GENERATOR - MADE IN ITALY - EUROPEAN QUALITY - MADE TO LAST THE DISTANCE2 pole / 3000rpmThese 2 bearing units have a 30mm parallel shaft and can be pulley driven. $3,600 plus gst Other size generators plus welder+ generator models also availablePh: 09 2996019Email: [email protected]: www.leesgroup.com
VISIT OUR COOL WEBSITE FOR YOUR ENGINEERING & WELDING SUPPLIESAn official Kemppi and Xcelarc Dis-tributor George Henry & Co Ltd47 Manchester StreetChristchurchwww.georgehenry.co.nz 0800 33 10 33
WOODWORKING
NZ S LARGEST RANGE OF MACHIN-ERY, NEW & USED NZ s biggest service team, mechan-ical, electrical, CNC servicing what we sell, and other brands. Jacks na-tionwide - tel 0800 332 288, www.jacks.co.nz
WORKSHOP EQUIPMENT
CHRISTCHURCH BASED NATION-WIDE DISTRIBUTORS OF:-ANTI FATIGUE MATS : standard sizes or custom cut, En-trance Mats, Interlocking Mats,Logo Mats, Counter Mats, Rubber sheeting. For a competitive quote and samples call021 1704 179, 03 377 9199 or [email protected] www.mattingsystems.co.nz
FROM ONE TOOL TO A WHOLE WORKSHOP FULLThe Tool Barn, 45 Jellicoe Rd, Panmure, Auckland. Tel: (09) 570 8064, [email protected],www.toolbarn.co.nz.
WORKSHOP TOOLS
WORK WITH THE BEST - RON ENRIGHT TOOLS LTDThe only place to get high quality tools for electronics manufacturers, engineering, automotive and dis-cerning home users.www.ronenright.co.nz63 Morrin Rd, Panmure. ph 09 527 7021
LM 7
550
Radial arm drill, Russian, 5 MT spindle
Power rise and fall, Vice, Box table, Good condition (Also 5 other drills in stock.)
Phone Simon on 021 920 700 or 09 274 4058
PRICE $8,500 +GST
Next Issue: June 2017ADVERTISING DEADLINES:Advertising booking deadline: 19th May 2017
Advertising copy deadline: 24th May 2017Circulated with New Zealand Engineering
News in New Zealand and published by:
HAYLEYMEDIA Limited level 1, 16 Byron Avenue, Takapuna, Auckland, PO Box 33 146, Takapuna, North Shore 0740 ph 09 486 0077 Publisher of New Zealand Food Technology, New Zealand Engineering NewsAdvertising sales manager Michael Kingston ddi 09 484 1309 publisher Andy Hobbs design and production Rheon Slade production, plates and print Crucial Colour
Be proactive, list your surplus, no longer required machinery.
No commission charged, only a listing feeCall Michael Kingston on 09 484 1309 to book your ad TODAY!
Machineryseller - read by engineers - for engineers!
Machinery Seller offers a cost effective way of selling your services, products as well as a way of off-loading those items which are now “gathering dust” nationwide.
Be pro-active and call Michael Kingston for our rates 09 484 1309 email : [email protected]
For Buying and Selling Plant Equipment & Machinery
NEW ZEALAND
gq p
June 2012 volume: 10 number: 5
OF_
4776
AI_
4884
Scott Machinery 0800 215 215 • www.scottmachinery.co.nz
SM
_487
7
New Auckland Branch
Unit 2, 57 Kerwyn Ave, East Tamaki. New Auckland branch now launched, call Logan or Garth on (09) 281-2095 or see us at EMEX!
Total CNC Products Ltd 09 274 5890 • www.totalcnc.co.nz
Victor VTurn A26/130YCV
Victors latest model CNC slant bed lathe. 10” chuck, 3500rpm spindle with “C”
axis, live tooling and “Y” axis. 670mm swing and 1300mm between centers.
This is a serious metal cutting lathe. Many options and great tooling package
included. Can be installed immediately.
MICROCUT BNC-2280XL CNC Teach Lathe
NZ’s most popular CNC ‘Teach’ Lathe. Features: 550mm swing over bed, max.
turning length 2000mm, Spindle 106mm bore & 2400 rpm, DI-8 camlock spindle
nose & SGS-315 steel chuck, High power 15 kw spindle motor, VDI40 8 station
hydraulic turret. This new BNC lathe includes latest Siemens 828D controller
+ shopturn for easy shop floor programming. Microcut BNC-2280XL will not be
beaten when comparing quality, performance & value. Available for inspection
and immediate installation.
EVERISING H360-HA Bandsaw
Fully Automatic with NC controller, chip conveyor, roller table, variable
vise pressure and full stroke clamping. Column design for rigidity and
cutting accuracy. Bar capacity 360mm. This quality saw is available for
immediate installation.
TCN
C_4
860
CNC Direct Ltd – Tel: 09 622 2169 – www.cncdirect.co.nz
CD
_487
8
Chmer wire cut and spark eroder machines.
Quality products made in Taiwan since 1975. Large range available.
Ph David 09 622 2169 [email protected]
FAT-HACO TUR MN-560 Universal flat bed CNC Lathe.
Their new version Powerful Siemens 840D control with shop turn
conversational programming 8 station turret
[email protected] 09 6222169
Takisawa NEX908
Quality machine, manufactured with pride in Taiwan. Twin spindle, both 5000rpm.
12 station live turret, full C axis. Y axis +/-50mm. 52mm bar capacity with 65mm
option. Fanuc control, wide range of options available. Bar feed or gantry load.
Call now. Call David 09 622 2169 [email protected]
ms_june12.indd 1
1/6/12 8:29:29 AM
For Buying and Selling Plant Equipment & Machinery
NEW ZEALAND
gq p
June 2012 volume: 10 number: 5
OF_
4776
AI_
4884
Scott Machinery 0800 215 215 • www.scottmachinery.co.nz
SM
_487
7
New Auckland Branch
Unit 2, 57 Kerwyn Ave, East Tamaki. New Auckland branch now launched, call Logan or Garth on (09) 281-2095 or see us at EMEX!
Total CNC Products Ltd 09 274 5890 • www.totalcnc.co.nz
Victor VTurn A26/130YCV
Victors latest model CNC slant bed lathe. 10” chuck, 3500rpm spindle with “C”
axis, live tooling and “Y” axis. 670mm swing and 1300mm between centers.
This is a serious metal cutting lathe. Many options and great tooling package
included. Can be installed immediately.
MICROCUT BNC-2280XL CNC Teach Lathe
NZ’s most popular CNC ‘Teach’ Lathe. Features: 550mm swing over bed, max.
turning length 2000mm, Spindle 106mm bore & 2400 rpm, DI-8 camlock spindle
nose & SGS-315 steel chuck, High power 15 kw spindle motor, VDI40 8 station
hydraulic turret. This new BNC lathe includes latest Siemens 828D controller
+ shopturn for easy shop floor programming. Microcut BNC-2280XL will not be
beaten when comparing quality, performance & value. Available for inspection
and immediate installation.
EVERISING H360-HA Bandsaw
Fully Automatic with NC controller, chip conveyor, roller table, variable
vise pressure and full stroke clamping. Column design for rigidity and
cutting accuracy. Bar capacity 360mm. This quality saw is available for
immediate installation.
TCN
C_4
860
CNC Direct Ltd – Tel: 09 622 2169 – www.cncdirect.co.nz
CD
_487
8
Chmer wire cut and spark eroder machines.
Quality products made in Taiwan since 1975. Large range available.
Ph David 09 622 2169 [email protected]
FAT-HACO TUR MN-560 Universal flat bed CNC Lathe.
Their new version Powerful Siemens 840D control with shop turn
conversational programming 8 station turret
[email protected] 09 6222169
Takisawa NEX908
Quality machine, manufactured with pride in Taiwan. Twin spindle, both 5000rpm.
12 station live turret, full C axis. Y axis +/-50mm. 52mm bar capacity with 65mm
option. Fanuc control, wide range of options available. Bar feed or gantry load.
Call now. Call David 09 622 2169 [email protected]
ms_june12.indd 1
1/6/12 8:29:29 AM
October 2014 volume: 12 number: 9
OF_
63
61
AP
635
4
• ‘Automatic Reactive’ beam – world patented• Ideal for small batches • Hybrid Drive System – 50% power saving
• Digital part processing• Faster processing Easy Operation
Press Brake withAutomatic Tool Changer
Website: www.amprom.co.nz TEL: 092737080EMAIL: [email protected]
The Sprit of Black
The Passion of Red
The Innovation of Silver
Am Prom Is The Exclusive New ZealandAgent for AmadaAmada Sheet MetalFiber Laser (4kW)
Turret Punch Press
Press Brake
Combination
Processing Samples WE SUPPORT WHAT WE SELL WWW.AMPROM.CO.NZ P: 09 273 7080 [email protected]: www.amprom.co.nz TEL: 092737080EMAIL: [email protected]
The Sprit of Black
The Passion of Red
The Innovation of Silver
Am Prom Is The Exclusive New ZealandAgent for AmadaAmada Sheet MetalFiber Laser (4kW)
Turret Punch Press
Press Brake
Combination
Processing Samples
Up to 25mof tooling
Website: www.amprom.co.nz TEL: 092737080EMAIL: [email protected]
The Sprit of Black
The Passion of Red
The Innovation of Silver
Am Prom Is The Exclusive New ZealandAgent for AmadaAmada Sheet MetalFiber Laser (4kW)
Turret Punch Press
Press Brake
Combination
Processing Samples
Set up any job in less than 2 min automatically
ATCInnovation
Lucas Machinery 09 2744058 or 021 471552 [email protected]
LM 6
350
Surface Grinder Okamoto ( Made in Japan ) Model 105DX Acc.
Mag Table, Spark out, Demag, Wheel dresser, many extras, best you can buy.
Phone Sid for more details or Lucas Machinery on 092744058
Mazak CNC Lathe, model Super Quick Turn 28. Complete with parts catcher, tool setter,
LSN bar feed unit. This is a top quality machine, comes with tooling. Ph. Simon for more details on 021920700 Ecoca MT 208MC CNC Lathe with C Axis and Milling, Fanuc 21i TB. Loads of
Tooling. Phone Simon for more details 021920700 orLucas Machinery on 092744058
Total CNC Products Ltd 09 274 5890 • www.totalcnc.co.nz
TC
_632
4
VICTOR VC-A85 CNC Machining CenterLatest model Fanuc controller with high speed options included
850mm (X) x 600mm (Y) x 560mm (Z). Table size 1100 x 600BT40 12,000rpm oil cooled spindle with CTS and ATS
Prepared for 4th axis and can be purchased with or without the rotary table.
Many other options and this is our #1 Victor selling model in NZView anytime and install immediately!
MICROCUT VM-1000Installed new into NZ in 2006X/Y/Z travels – 1000mm x 600mm x 570mmBT40 10,000rpm spindle, Fanuc 21i-Mb controller
Chip conveyor and other options included. Very tidy and reliable used VMCKitamura Mycenter 3X/APCTravels 760mm (X) x 455mm (Y) x 460mm (Z)
10,000rpm BT40 spindle, Chip conveyorHigh pressure 70 bar CTS system Shuttle type automatic pallet changer
Still many years of production left in this awesome Kitamura and rarely available.
Inspect now in our Auckland showroom.
CM
63
55
12 | May 2017 — www.machineryseller.co.nz
SM
752
8
