Upload
others
View
12
Download
0
Embed Size (px)
Citation preview
Solu
tion
Over
view
Expansion Architectures in DSLAM Central Office SolutionsSubscriber pricing has become the all-important issue in today’s DSL offerings. How todeliver DSL at the lowest per-subscriber cost is key. Recent technical developments haveadded expansion architectures as an effective tool to maximize subscriber density andminimize costs without replacing existing DSLAMs.
When considering a high-density DSLAM, service providers should also consider flexibilityof service, scalability, space, and cost per port. These are all critical factors that greatlyimpact service provider ability to expand DSL delivery throughout their customer base.
The ADTRAN Total Access 3010 DSLAM is a cost-effective, compact, high-density solutioncreating DSL expansion opportunities in areas that were previously considered noteconomical.
The Total Access 3010 HDX (High Density eXpansion) architecture provides a single systemsolution for networks that demand seamless, high-capacity solutions for the central office.
IT11OVHDX-0401
Total Access 3010 DSLAMProduct SpecificationsKey Modules
■ System Controller Unit (SCU)
■ DS3, STM-1, or 128-port Cell Switch Modules (CSMs)
■ DSL-specific line cards: ADSL, SHDSL, IDSL, E1,
DSX-1, DS1 IMA
Minimum Configurations
■ SCU, CSM, and a single line card
Mechanical
■ Dimensions: 150 mm H x 480 mm x 305 mm D
■ Weight: 5.25 kg (main chassis)
Interfaces
MUX Interfaces
■ STM-1
■ DS3
Line Module Interfaces
■ SHDSL 8 ports
■ DSX-1/E1 4 ports
■ DS1/E1 IMA 8 ports, dual wide card
■ DS3 Line Module 1 port
■ Circuit Emulation 4 E1 ports
■ ADSL 8 ports
■ ADSL with splitters 8 ports, dual wide card
■ E1 Frame Relay 1 port
■ SHDSL with IMA 16 ports
■ SHDSL CES 4 ports
Electrical
■ 15 Amps ■ –42 VDC to –56 VDC input range
Regulatory Standards
■ NEBS Level 3■ GR-1089-CORE, Issue 3■ GR-63-CORE, Issue 2■ CE Mark
Management
■ Local management: TL1, EMS, Ethernet interface
for SNMP■ Remote management: TL1, SNMP
Environmental
■ Operating: –40°C to +70°C■ Storage: –40ºC to +85ºC ■ Relative humidity: 95 percent, noncondensing
Ordering Information for Other
Total Access 3000 DSLAM Equipment
Equipment Part #
Total Access 3010 SCU 1181018L1#PTotal Access 3010 DS3 CSM 1181041L2Total Access 3010 128-port CSM 1181041L4Total Access 3010 OC-3c CSM 1181044L1Total Access 3010 Quad DSX-1/E1 1181402L1Total Access 3010 Octal SHDSL 1181403L2Total Access 3010 Octal ADSL 1181405L1Total Access 3010 Octal IMA 1181409L2Total Access 3010 E1 Frame Relay 1181414L1Total Access 3010 Circuit Emulation Module 1181420L1Total Access 3010 SHDSL with IMA 1181422L1Total Access 3010 Access Module Blank Faceplate 1181953L1Total Access 3010 MUX Blank Faceplate 1181952L1
The Network Access CompanyCopyright © 2004 ADTRAN, Inc. All rights reserved. ADTRANis a registered trademark of ADTRAN, Inc. and/or its affiliates in theU.S. and certain other countries. Total Access is a registered trade-mark of ADTRAN, Inc. in the U.S. All other trademarks mentioned inthis document are the property of their respective owners.
For more information about how ADTRAN can help you incorporate
cost-saving solutions for your network, visit www.adtran.com today.
ADTRAN, Inc.International Department901 Explorer BoulevardHuntsville, Alabama 35806USA
U.S. Headquarters+1 256 963 8000 voice+1 256 963 6300 [email protected]
International Customer Service+1 256 963 8716 voice
Asia Pacific—Beijing, China+86 10 8527 5011 voice+86 10 8527 5010 [email protected]
Asia Pacific (Other than Chinaand Australia)—Hong Kong, China+852 2824 8283 voice+852 2824 8928 [email protected]
Asia Pacific—Guangzhou, China+86 20 8384 6015 voice+86 20 8384 7127 [email protected]
Asia Pacific—Melbourne, Australia+61 3 9658 0500 voice+61 3 9658 0599 [email protected]
Europe/Middle East/Africa—Bad Homburg, Germany+49 6172 483 2304 voice+49 6172 483 2305 [email protected]
Europe/Middle East/Africa—Dublin, Ireland+353 1 669 4790 voice+353 1 669 4791 [email protected]
Latin America/Caribbean+1 954 474 4424 voice+1 954 474 1298 [email protected]
Mexico+1 954 474 4424 voice+1 954 474 1298 [email protected]
Central Office Exhaust and Expansion. With the height-
ened interest in DSL promotion and delivery, many offices
have exceeded the capacity of initially deployed DSLAMs. The
Total Access 3010 HDX (High Density eXpansion) architecture
brings new advantages to central office capacity concerns.
ADTRAN’s HDX architecture keeps expansion costs in check by
allowing shelf-by-shelf growth, coupling low initial costs with
per port costs that actually decrease as systems are added. A
single HDX system can support 1,056 DSL ports with a
common network interface and a single IP address.
IMA/ATM Aggregation. Many DSLAMs utilize multiple E1s
to transport user data to the centralized switch or router to
interface the Internet. Multiple E1 interfaces can exhaust the
port capacity of a router long before any router processing
limitations are reached, causing expensive, inefficient usage of
network resources. The Total Access 3010 is commonly used
throughout the industry to aggregate up to 88 E1s in a single
DS3 or STM-1 interface, minimizing router port requirements
and increasing overall system efficiency. The same Total Access
3010 can also provide subscriber access through ADSL,
SHDSL, and E1 interfaces while simultaneously providing IMA
aggregation services.
The HDX Architecture utilizes two system chassis:
1. Total Access 3010 DSLAM
2. Total Access 3060 Splitter Shelf
The Total Access 3000 DSLAM is a carrier-class, full-service,
temperature hardened DSLAM ideal for CO and large RT
applications. It provides full DSLAM functionality serving
up to 176 ports in only ten inches of rack space. The Total
Access 3010 DSLAM also provides edge switch capability,
offering E1 IMA and DS3 aggregation. The Total Access
3010 DSLAM HDX architecture scales port capacity from a
single chassis, 176 port system to a multichassis configura-
tion serving up to 1,056 subscribers.
The Total Access 3060 DSLAM Splitter Shelf houses 22 octal
splitter modules for POTS access and complements the
installation of the Total Access 3010 DSLAM. Cabling is neat
and simplified for ease of installation.
The ADTRAN Total Access 3060 accommodates other
services deployed from the same chassis including SHDSL,
IMA, IDSL, E1 Frame Relay, Circuit Emulation Services, and
E1 by utilizing a cut-through module in the corresponding
splitter chassis.
HDX Features
■ 1,056 contiguous ports
■ Single system expansion
■ One IP address
■ All DSLAM access modules supported
■ Full QoS support for CBR, UBR, VBRrt, and VBRnrt
■ UNI 3.1 and TM 4.0 support
■ Per VC queuing and policing
Add Revenue and Network Efficiency With A Single Platform Total Access 3010 DSLAM High Density eXpansion (HDX) Architecture
ADTRAN Total Access 3010 High Density eXpansion (HDX) Architecture
■ Interconnection between the shelves is via an RJ-45 Cat 5E cable
■ DS3 PSM is the primary switch
■ Expansion Switch Modules (ESM) chain in and out additional shelves
■ Up to five ESM modules per chain
■ Serial communications from the expansionshelves are aggregated in the DS3-PSM
■ HDX architecture can be configured with redundancy by deploying both A and B MUX slots
■ Managed as a single platform
■ Remote and local management options
■ The DS3 PSM – Primary Switch Module
■ The ESM – Expansion Switch Module
■ The PCU – Primary Controller Unit Module
■ The ECU – Expansion Controller Unit Module
H o w t h e H D X S y s t e m W o r k s
F o u r C o m p o n e n t M o d u l e s f o r t h e H D X A r c h i t e c t u r e
Ordering Information for HDX
Equipment Part #
Total Access 3010 Shelf 1182003L1Heat Baffle 1182005L1Rackmount Fan Module 1182006L1ADSL Splitter Module (ANSI) 1183002L1ADSL Splitter Module (ETSI) 1183007L1Cut-Through Module 1183003L1Cut-Through Module with Test Access 1183003L2DS3 PSM 1181041L3ESM 1181046L1PCU 1181918L1ECU 1181919L1Total Access 3060 Splitter Shelf 1181003L1Metallic Test Controller 1183006L1Dual BNC Adapter 1181004L2
Primary Shelf Expansion Shelf
Central Office Exhaust and Expansion. With the height-
ened interest in DSL promotion and delivery, many offices
have exceeded the capacity of initially deployed DSLAMs. The
Total Access 3010 HDX (High Density eXpansion) architecture
brings new advantages to central office capacity concerns.
ADTRAN’s HDX architecture keeps expansion costs in check by
allowing shelf-by-shelf growth, coupling low initial costs with
per port costs that actually decrease as systems are added. A
single HDX system can support 1,056 DSL ports with a
common network interface and a single IP address.
IMA/ATM Aggregation. Many DSLAMs utilize multiple E1s
to transport user data to the centralized switch or router to
interface the Internet. Multiple E1 interfaces can exhaust the
port capacity of a router long before any router processing
limitations are reached, causing expensive, inefficient usage of
network resources. The Total Access 3010 is commonly used
throughout the industry to aggregate up to 88 E1s in a single
DS3 or STM-1 interface, minimizing router port requirements
and increasing overall system efficiency. The same Total Access
3010 can also provide subscriber access through ADSL,
SHDSL, and E1 interfaces while simultaneously providing IMA
aggregation services.
The HDX Architecture utilizes two system chassis:
1. Total Access 3010 DSLAM
2. Total Access 3060 Splitter Shelf
The Total Access 3000 DSLAM is a carrier-class, full-service,
temperature hardened DSLAM ideal for CO and large RT
applications. It provides full DSLAM functionality serving
up to 176 ports in only ten inches of rack space. The Total
Access 3010 DSLAM also provides edge switch capability,
offering E1 IMA and DS3 aggregation. The Total Access
3010 DSLAM HDX architecture scales port capacity from a
single chassis, 176 port system to a multichassis configura-
tion serving up to 1,056 subscribers.
The Total Access 3060 DSLAM Splitter Shelf houses 22 octal
splitter modules for POTS access and complements the
installation of the Total Access 3010 DSLAM. Cabling is neat
and simplified for ease of installation.
The ADTRAN Total Access 3060 accommodates other
services deployed from the same chassis including SHDSL,
IMA, IDSL, E1 Frame Relay, Circuit Emulation Services, and
E1 by utilizing a cut-through module in the corresponding
splitter chassis.
HDX Features
■ 1,056 contiguous ports
■ Single system expansion
■ One IP address
■ All DSLAM access modules supported
■ Full QoS support for CBR, UBR, VBRrt, and VBRnrt
■ UNI 3.1 and TM 4.0 support
■ Per VC queuing and policing
Add Revenue and Network Efficiency With A Single Platform Total Access 3010 DSLAM High Density eXpansion (HDX) Architecture
ADTRAN Total Access 3010 High Density eXpansion (HDX) Architecture
■ Interconnection between the shelves is via an RJ-45 Cat 5E cable
■ DS3 PSM is the primary switch
■ Expansion Switch Modules (ESM) chain in and out additional shelves
■ Up to five ESM modules per chain
■ Serial communications from the expansionshelves are aggregated in the DS3-PSM
■ HDX architecture can be configured with redundancy by deploying both A and B MUX slots
■ Managed as a single platform
■ Remote and local management options
■ The DS3 PSM – Primary Switch Module
■ The ESM – Expansion Switch Module
■ The PCU – Primary Controller Unit Module
■ The ECU – Expansion Controller Unit Module
H o w t h e H D X S y s t e m W o r k s
F o u r C o m p o n e n t M o d u l e s f o r t h e H D X A r c h i t e c t u r e
Ordering Information for HDX
Equipment Part #
Total Access 3010 Shelf 1182003L1Heat Baffle 1182005L1Rackmount Fan Module 1182006L1ADSL Splitter Module (ANSI) 1183002L1ADSL Splitter Module (ETSI) 1183007L1Cut-Through Module 1183003L1Cut-Through Module with Test Access 1183003L2DS3 PSM 1181041L3ESM 1181046L1PCU 1181918L1ECU 1181919L1Total Access 3060 Splitter Shelf 1181003L1Metallic Test Controller 1183006L1Dual BNC Adapter 1181004L2
Primary Shelf Expansion Shelf
Solu
tion
Over
view
Expansion Architectures in DSLAM Central Office SolutionsSubscriber pricing has become the all-important issue in today’s DSL offerings. How todeliver DSL at the lowest per-subscriber cost is key. Recent technical developments haveadded expansion architectures as an effective tool to maximize subscriber density andminimize costs without replacing existing DSLAMs.
When considering a high-density DSLAM, service providers should also consider flexibilityof service, scalability, space, and cost per port. These are all critical factors that greatlyimpact service provider ability to expand DSL delivery throughout their customer base.
The ADTRAN Total Access 3010 DSLAM is a cost-effective, compact, high-density solutioncreating DSL expansion opportunities in areas that were previously considered noteconomical.
The Total Access 3010 HDX (High Density eXpansion) architecture provides a single systemsolution for networks that demand seamless, high-capacity solutions for the central office.
IT11OVHDX-0401
Total Access 3010 DSLAMProduct SpecificationsKey Modules
■ System Controller Unit (SCU)
■ DS3, STM-1, or 128-port Cell Switch Modules (CSMs)
■ DSL-specific line cards: ADSL, SHDSL, IDSL, E1,
DSX-1, DS1 IMA
Minimum Configurations
■ SCU, CSM, and a single line card
Mechanical
■ Dimensions: 150 mm H x 480 mm x 305 mm D
■ Weight: 5.25 kg (main chassis)
Interfaces
MUX Interfaces
■ STM-1
■ DS3
Line Module Interfaces
■ SHDSL 8 ports
■ DSX-1/E1 4 ports
■ DS1/E1 IMA 8 ports, dual wide card
■ DS3 Line Module 1 port
■ Circuit Emulation 4 E1 ports
■ ADSL 8 ports
■ ADSL with splitters 8 ports, dual wide card
■ E1 Frame Relay 1 port
■ SHDSL with IMA 16 ports
■ SHDSL CES 4 ports
Electrical
■ 15 Amps ■ –42 VDC to –56 VDC input range
Regulatory Standards
■ NEBS Level 3■ GR-1089-CORE, Issue 3■ GR-63-CORE, Issue 2■ CE Mark
Management
■ Local management: TL1, EMS, Ethernet interface
for SNMP■ Remote management: TL1, SNMP
Environmental
■ Operating: –40°C to +70°C■ Storage: –40ºC to +85ºC ■ Relative humidity: 95 percent, noncondensing
Ordering Information for Other
Total Access 3000 DSLAM Equipment
Equipment Part #
Total Access 3010 SCU 1181018L1#PTotal Access 3010 DS3 CSM 1181041L2Total Access 3010 128-port CSM 1181041L4Total Access 3010 OC-3c CSM 1181044L1Total Access 3010 Quad DSX-1/E1 1181402L1Total Access 3010 Octal SHDSL 1181403L2Total Access 3010 Octal ADSL 1181405L1Total Access 3010 Octal IMA 1181409L2Total Access 3010 E1 Frame Relay 1181414L1Total Access 3010 Circuit Emulation Module 1181420L1Total Access 3010 SHDSL with IMA 1181422L1Total Access 3010 Access Module Blank Faceplate 1181953L1Total Access 3010 MUX Blank Faceplate 1181952L1
The Network Access CompanyCopyright © 2004 ADTRAN, Inc. All rights reserved. ADTRANis a registered trademark of ADTRAN, Inc. and/or its affiliates in theU.S. and certain other countries. Total Access is a registered trade-mark of ADTRAN, Inc. in the U.S. All other trademarks mentioned inthis document are the property of their respective owners.
For more information about how ADTRAN can help you incorporate
cost-saving solutions for your network, visit www.adtran.com today.
ADTRAN, Inc.International Department901 Explorer BoulevardHuntsville, Alabama 35806USA
U.S. Headquarters+1 256 963 8000 voice+1 256 963 6300 [email protected]
International Customer Service+1 256 963 8716 voice
Asia Pacific—Beijing, China+86 10 8527 5011 voice+86 10 8527 5010 [email protected]
Asia Pacific (Other than Chinaand Australia)—Hong Kong, China+852 2824 8283 voice+852 2824 8928 [email protected]
Asia Pacific—Guangzhou, China+86 20 8384 6015 voice+86 20 8384 7127 [email protected]
Asia Pacific—Melbourne, Australia+61 3 9658 0500 voice+61 3 9658 0599 [email protected]
Europe/Middle East/Africa—Bad Homburg, Germany+49 6172 483 2304 voice+49 6172 483 2305 [email protected]
Europe/Middle East/Africa—Dublin, Ireland+353 1 669 4790 voice+353 1 669 4791 [email protected]
Latin America/Caribbean+1 954 474 4424 voice+1 954 474 1298 [email protected]
Mexico+1 954 474 4424 voice+1 954 474 1298 [email protected]