toshiba lamps fixture maxilum led signboard decorative lighting signage emergency lamp

TOSHIBA LAMPSFIXTURE

MAXILUMLED SIGNBOARD

DECORATIVE LIGHTINGSIGNAGE

EMERGENCY LAMPCOSMEDICO

GADGET

2009Catalogue

Fu Sun Lighting LimitedRoom 302, 3/F, Cheong Lee Building, No. 208 Tsat Tsz Mui Road,

North Point, Hong KongTel: (852) 2570 8193

Fax: (852) 2571 3150e-Mail:[email protected]

�

Table Of ContentsTable Of Contents

Company Introduction

TOSHIBA Lamps

Fixtures

Eye Dichro-Cool Reflector Lamp

Maxilum Fluorescent Lamp Reflectors

“IMA” LED Signboard Display System

Decorative Lighting

Signage Solution

Lamp Tester

Emergency Fluorescent Lamp / Rechargable Emergency Fluorescent Lamp

Cosmedico Sun Tanning Lamps

Mosquito / Insect Killer Lamps

Gadgets

Christmas Trees & Ornaments

Eco-Non-Woven Bags

Ribbon & Lanyard

Sculpture

Adorable Animal Radio

LCD TV

Warm Bag

Display Stands, Craftworks & Accessories

USB Gadgets

®

P2

P3 - 4

P5 - 48

P49 - 52

P53 - 54

P55 - 57

P58 - 62

P63 - 70

P71 - 72

P73

P74 - 75

P76 - 82

P83 - 84

P85 - 88

P89 - 90

P91

P92

P93

P94

P95

P96

P97

P98

�

About usFu Sun Lighting Ltd is a privately owned company. Our group registered in Hong Kong since 1984. We are a professional company specializing in sales, marketing and trading on a wide range of products. We are the authorized agent of TOSHIBA Lighting and Technology Corporation in Hong Kong, Macau and China. With our continuous development on various types of business, we hope to satisfy our customers and meet your needs with our greatest sincerity.

To promote a better environment and sustainable city development to our future generations, as one of our missions, we put our focus on lots of environmental friendly products. One of our main businesses is the LED lamp, which is an advanced technological lamp with better efficiency, longer life span and little impact on our Earth. We also has professional staff who can provide you the best advices on lamps and energy saving.

We are now actively researching and developing other green products to achieve our aims. If you have any opinion on our products, please feel free to contact us.

�

Future and Mission

With over 20 years of development of our all-rounded sales strategy and diversified comprehensive package, Fu Sun Lighting Ltd has built up a good sales network and maintained a good relationship with our customers.

Besides, our well cooperation and consolidate relationship with customers from US, Korea, Japan and several Asian countries become a good stepping stone in our further development. We are actively extending our business towards the overseas markets.

Our missions are:(1) To provide the highest services level to our customers, in order to build and maintain a trustworthy and long lasting relationship.(2) To develop and promote the use of green energy technology so as to create a greener and cleaner environment on Earth.

With our sincerity and experience, we shall provide the best service to our customers. Should there be any inquires, please feel free to contact us by e-Mail: [email protected]. We are always of service with you.

Throughout these years, we have adequate experience in trading with China. We also have set up a well established network of Business Partners in Guangdong area. In future, we will continue to explore the market in China and other countries.

�

�

Toshiba has been catering to people’s lighting needs since company developed Japan’s first incandescent light bulb, and Toshiba Lighting & Technology has inherited this legacy.

We are more than just a manufacturer of lighting equipment. We are constantly incorporating the latest technology from different fields within the world of lighting.

The electric light that has lit the civilized world since Edison, now shines in a large number of areas including the high-tech fields of office automation and biotechnology. We are working to develop ways to protect the environment, taking energy and resource savings and recyclability into consideration.

Our manufacturing facilities comply with international environmental standards. We will continue to develop products that are “Good for the consumer yet good for the Earth”.

Our goal is to succeed at the highest stage of the lighting technology fields and to light up the 21st century.

�

Toshiba has been catering to people’s lighting needs since company developed Japan’s first incandescent light bulb, and Toshiba Lighting & Technology has inherited this legacy.

We are more than just a manufacturer of lighting equipment. We are constantly incorporating the latest technology from different fields within the world of lighting.

The electric light that has lit the civilized world since Edison, now shines in a large number of areas including the high-tech fields of office automation and biotechnology. We are working to develop ways to protect the environment, taking energy and resource savings and recyclability into consideration.

Our manufacturing facilities comply with international environmental standards. We will continue to develop products that are “Good for the consumer yet good for the Earth”.

Our goal is to succeed at the highest stage of the lighting technology fields and to light up the 21st century.

The first electric light used for illumination purpose in Japan was lit on March 25, 1878. It was a Dubosq arc lamp, switched on at a banquet held in celebration of the opening of the central office of Tokyo Central Telegraph’s Station (Now, Ministry of Posts and Telecommunications).

The engineers of this event were Professor W.E. Aryton of Imperial College of Engineering (Faculty of Engineering, Tokyo University), and his colleague Mr. Ichisuke Fujioka who could later go on found Hakunetu-Sha & Co. Ltd. The very first lighting of an incandescent light took place on June 25, 1884 at the commencement ceremony of the railroad line running from Ueno to Takasaki.

Twenty four incandescent lights with one arc light placed in the centre were lit to welcome the Japa-nese Emperor and Empress, who made an appear-ance.

Professor Ichisuke Fujioka is the person credited for the development of the incandescent bulbs in Japan.

In order to develop an incandescent bulb domesti-cally, he was appointed Chief Engineer at Tokyo Electric Illuminating Company (Now, Tokyo Electric Power Company). He poured his energy into the development and management of the various electri-cal works there, and began working towards achiev-ing the much desired domestic incandescent bulb. Professor Ichisuke Fujioka could be called the father of the incandescent bulbs in Japan.

On April 1, 1890, Professor Fujioka in cooperation with Masakazu Miyoshi, one of the most successful electric appliance manufacturers at that time, estab-lished Hakunetu-Sha & Co, Ltd. in Tokyo.

The result of this merger was the official production of incandescent bulbs in Japan.

Hakunetu-Sha is now called TOSHIBA LIGHTING & TECHNOLOGY CORPORATION which today is a leader in lighting technology.

TOSHIBA LIGHTING & TECHNOLOGY’SBRIEF HISTORY

Prof. I.Fujioka

Hakunestu-Sha & Co., Ltd

The history of TOSHIBA LIGHTING & TECHNOLOGY CO.

�

In 1879, Edison succeeds in producing the first carbon lamp with a filament made from carbon-ized cotton thread. This was the first lamp to be put into factory production by Edison Lamp Co. in 1880.

2. Drawn Tungsten Filament Lamp (USA-G.E., Coolidge, 1910)

3. Gas Filled Lamp (USA-G.E., Langmuir, 1913)

4. Coiled-coil Lamp (Japan-TOSHIBA, Jun-ichi Miura, 1921)

5. Inside Frosted Lamp (Japan-TOSHIBA, Kitsuzo Fuwa, 1925)

In 1959, Zubler invents a small, highly efficient lamp in America. By enclosing halogen material inside the quartz glass tube of the lamp, he was able to prevent blackening of the lamp. This long life lamp was made commercially available in 1961.

The 6 great inventions in lampsSince the invention of the commercial carbon lamp by Thomas A Edison in 1879, there have been many refinementsand inventions; but the most notable among these are “The Six Great Lamp Inventions” that have been credited with contributing more than any other to lamp development. Two of these six world-famous inventions were brought about by TOSHIBA.

1. Commercial Carbon Lamp (USA, Edison, 1879)

Drawn Tungsten Filament lamp is invented by Coolidge in America in 1910. The appearance of this drawn tungsten filament led to the ensuing rapid development of light bulbs.

In 1913 America, Langmuir invents the so-called gas-filled lamp, filling an inert gas that does not react with tungsten inside the lamp so as to prevent evaporation due to heat from the tungsten filament. Consequently, it makes lamp life longer significantly.

In 1921, Toshiba's Jun-ichi Miura invents the Coiled-coil filament by coiling the single tungsten coil once more. This Coiled-coil filament decreases heat loss, and brings about an improvement in the lamp's efficiency.

Along with an improvement in the brightness of the lamp, glare becomes a problem. In 1925, in order to solve this problem, the world's first lamp to have a frosted glass interior is invented by TOSHIBA Kitsuzo Fuwa.

6.Tungsten Halogen Lamp (USA-G.E. E.Z.Zubler, 1959)

TOSHIBA LIGHTING & TECHNOLOGY’SBRIEF HISTORY

�

Incandescent Lamps Fluorescent Lamps HID Lamps1880

1890

1900

1910

1920

1930

1940

2002

2000

1990

1980

1970

1960

1950

Edison Lamp(1870) U.S.A.

Japan’s FirstCarbon Filament Lamp(1890)

Metalic-CarbonFilament Lamp (1890)

First Drawing Tungsten(1910) U.S.A.

First Glass Filled Lamp(1913) U.S.A.

First Coiled-Coil Lamp(1921)

First Frosted Lamp(1925)

Tip-less Lamp(1925)Inside Half

Forsted Lamp (1930)

Inside 4/5 Forsted LampSoft Re�ectorLamp (1934)

“Mellow Z”(2000)

Super Daylight Fluorescent Lamp(2002)

NEOBALL-E(2001)

NEOBALL-ZRe�ector Type(2002)“Mellow Z”

Clear(2002)

NEOBALL-Z Plus(2000)

Infra-red Lamp for Dying(1955)

Re�ector-TypeFloodlightingLamp(1952)

Standard Lamp(1955) White Ball

(1958)Bi-post LampSOKW(1959)

Cool Ray (1960)

Dip Seal Globe “Cystal Lamp”(1968)

Tubular infra-red Lamp (1963)

White Lamp (1973)Krypton Lamp(1975)

Interior Lamp(1975)

“Wattbrighter” WhiteLamp (1978) Mini Krypton

Lamp (1978)

Fantasia Lamp (1978)

Circular Hearter(1988)

Pastel Color Lamp (1990)Fantasia Mini Krypton Lamp (1993)

High Krypton(1996)

Mini Krypton Lamp (2002)

NEOBALL 52U (Double bulb) Typefor enclosed �xtures(1996)

NEOBALL 5(1994)

Mellow Line(1991)

(Three band phosphor)”Mellow 5”(1990)

Electrical NEOBALL100(1993)

NEOBALL 5 3U (Triple bulb)Type(1994)

T5 Circline“Neo-Slim”(1996)

NEOBALL-Z(1998)

NEOBALL 5100WType(1996)

NEOBALL 52U (Doublebulb) Type(1994)

NEOBALL Quick(1991)

High pressureMercury Lamp(1934)

Low pressureSodium Lamp(1935)

Low pressureSodium Lamp(1950)

High pressureMercury Lamp(1951)

Choke-less Mercury Lamp(1960)

Xenon Lamp(1957)

10KW 20KW High PowerMercury Lamp (1965)High E�ciency FluorescentMercury Lamp “Neo-super” (1966)High Color RenderingHalide Lamp (1967)

High E�ciency Metal Halide Lamp (1968)

High Pressure SodiumLamp “Neolux” (1970)

Noiseless MercuryLamp (1970)

HL-HalideLamp (1977)

HL-Neolux (1978)HL-Neo-Halide Lamp (1979)

60KW Metal Halide Lamp (1979)

HL-Neo-Halide2(1999)

Twin Neo Lux L (1996)

Twin Neo Lux (1992)

Neo Arc Beam (1994)

Neo Arc (199)

Neo Color (1981)

HL-Neo Halide Lamp (1989)

Fluorescent Mercury Lamp“Neo-super”

Neo Halide Lamp T-type (1986)

Fluorescent Lamp FL20D-DL(1940)

Circline 30W(1955)

High Output FluorescentLamp 110W(1959)

Rapid Master(1964)

Neoline(1963)

Neoline Noiseless(1965)

“Wattbrighter” T9Fluorescent Lamp(1977)

(Three band phosphor)“Mellow Look”(1978)

NEOBALL (1980)

Compact Fluorescent LampFPL FDL Type (1986)

Electrical NEOBALL 100(1987)

Electrical NEOBALL 100(1984)

Compact Fluorescent LampFML Type (1987)

D65 Color EvaluationLamp (1988)

�

,

�0

Energy Saving Lamps��

Product Order Code

EFA12D/812K-2EFD12L/828-2EFD12D/812K-2

12,0002,800

12,000

121212

E27E27E27

220/240220/240220/240

50/6050/6050/60

600810600

10,00010,00010,000

101010

848484

3-Band Super Daylight3-Band Warm White3-Band Super Daylight

EFA22L/828-2EFA22D/812K-2EFD22L/828-2EFD22D/812K-2

2,80012,000

2,80012,000

22222222

E27E27E27E27

220/240220/240220/240220/240

50/6050/6050/6050/60

1,4001,0001,4201,020

10,00010,00010,00010,000

10101010

84848484

ColorTemperature

(k)

Watts(w)

Base SupplyVoltage

(V)

Frequency(Hz)

InitialLumens

(lm)

AverageLife(h)

Std.Pkg.Q'ty.

ColorRenderingIndex (Ra)

Color Description

12W Type

22W Type

604040

65654848

123116116

140140130130

Bulb Dia(mm)

OverallLength(mm)

220/240V E27 TYPE

EFA 12W Type EFA 22W Type EFD 12W Type EFD 22W Type

In our efforts to help to reduce energy consumption and to conserve our Earth’s precious natural resources, Toshiba has developed the NEW NEOBALL Z compact fluorescent lamp which helps to conserve energy by using only 20% of the electric power needed to operate 60 watts incandescent lamp. This means the Toshiba Neoball will deliver 60 watts of light output while using only 12 watts of electricity.

In addition, since 80% of the energy used in a 60w lamp is lost in the form of heat, resulting in more energy wastage.

The NEW NEOBALL Z’s are not only as bright as incandescent lamps but also will operate considerably cooler due to less power consumption.

Toshiba is a prime mover in the design and development of new and various types of bulbs, responding to the growing diversity and sophistication of tomorrow’s needs.

Consumers have continually asked for “long life lamps” with greater lumens outputs and the NEW NEOBALL Z provides this benefit.

With a life hour rating of 10,000 hours, there will be less time, labor and expense spent on burnt out lamps replacements when you begin using the Toshiba compact fluorescent lamps. So if you are tired of pulling out the ladder every three months to change porch light, garage light, foyer lights and other hard to reach lamp locations.... the NEOBALL Z will be your choice, as it may last up to seven years, depending on the amount of daily usage.

Caution for UsageEnclosed fixture required for outdoor use.Do not use at places where exposed toweather.Lamp requires a short warm up period toreach full light output.Do not use on emergency exit fixtures.Do not use 22W type NEOBALL Z intotally enclosed recessed fixtures.Do not use 22W type NEOBALL Z indown light fixtures with heat insulations.

NotesThis product may cause interference to radios, televisions, wireless telephones and remote controls. Avoid placing this product near these devices. If interference occurs, move the product away from the device or plug into different outlet.

Caution for safetyNot for use on dimming circuits; May notwork with some electronic timers, photocells.Never disassemble or modify the bulb.Install or remove the bulb from fixture byholding plastic base.

3-Band Warm White 3-Band Super Daylight3-Band Warm White 3-Band Super Daylight

��

��

Energy Saving Lamps��

Energy Saving Lamps

TOSHIBA NEOBALL-E offers very energy saving for electronic ballast.

Only 1/4 energy cost6 time service lifeTurns on instantaneouslySlimmer design than glow bulbsVarious standard bases are

available for perfect, easy fit

EFA TYPEEFD 2U TYPE

(5 7 Watt)EFD E14 TYPE(5 7 9 Watt)

SPIRAL TYPE(25 Watt)

GLOBE TYPE(21 Watt)

EFD 4U TYPE(30 Watt)

Product OrderCode

ColorTemperature

(k)

Watts(w)

Base SupplyVoltage

(V)

Frequency(Hz)

InitialLumens

(lm)

AverageLife(h)

Std.Pkg.Q'ty.


Color DescriptionBulb Dia(mm)

OverallLength(mm)

220/240V E27 TYPE

EFA7L/ 27-EEFA7D/ 65-EEFA9L/ 27-EEFA9D/ 65-EEFA11L/ 27-EEFA11D/ 65-EEFA13L/ 27-EEFA13D/ 65-E

EFD5L/ 27-E*EFD5D/ 65-E*EFD7L/ 27-E*EFD7D/ 65-E*

EFD9L/ 27-E3U*EFD9D/ 65-E3U*EFD11L/ 27-E3U*EFD11D/ 65-E3U*EFD13L/ 27-E3U*EFD13D/ 65-E3U*EFD18L/ 27-E3U*EFD18D/ 65-E3U*

EFD30L/ 27-E4U*EFD30D/ 65-E4U*

2,7006,5002,7006,5002,7006,5002,7006,500

2,7006,5002,7006,500

2,7006,5002,7006,5002,7006,5002,7006,500

2,7006,500

779911111313

5577

99111113131818

3030

6262626268686868

38383838

4545454545454545

5454

200/240200/240200/240200/240200/240200/240200/240200/240

200/240200/240200/240200/240

200/240200/240200/240200/240200/240200/240200/240200/240

200/240200/240

50/6050/6050/6050/6050/6050/6050/6050/60

50/6050/6050/6050/60

50/6050/6050/6050/6050/6050/6050/6050/60

50/6050/60

430400480440630570710650

250220390350

560510750680810710

1,1001,000

1,8001,700

6,0006,0006,0006,0006,0006,0006,0006,000

6,0006,0006,0006,000

6,0006,0006,0006,0006,0006,0006,0006,000

6,0006,000

1010101010101010

20202020

2020202020202020

2020

8484848484848484

84848484

8484848484848484

8484

134134134134147147147147

104104114114

125125130130135135145145

170170

E27E27E27E27E27E27E27E27

E27E27E27E27

E27E27E27E27E27E27E27E27

E27E27

Note: *B22 base is available

3-Band Warm White3-Band Daylight3-Band Warm White3-Band Daylight3-Band Warm White3-Band Daylight3-Band Warm White3-Band Daylight

3-Band Warm White3-Band Daylight3-Band Warm White3-Band Daylight

3-Band Warm White3-Band Daylight3-Band Warm White3-Band Daylight3-Band Warm White3-Band Daylight3-Band Warm White3-Band Daylight

3-Band Warm White3-Band Daylight

DaylightColor Temperature

6,500KColor Temperature

2,700K

Warm White

EFD 3U TYPE(9 11 13 18 Watt)

��

220/240V SPIRAL TYPE

EFS15L/ 27 E27*EFS15D/ 65 E27*EFS25L/ 27 E27*EFS25D/ 65 E27*

EFS15L/ 27 E14EFS15D/ 65 E14

2,7006,5002,7006,500

2,7006,500

15152525

1515

48485555

4848

200/240200/240200/240200/240

200/240200/240

50/6050/6050/6050/60

50/6050/60

1,000950

1,5001,400

1,000950

6,0006,0006,0006,000

6,0006,000

20202020

2020

84848484

8484


3-Band Warm White3-Band Daylight

104104122122

107107

E27E27E27E27

E14E14

220/240V E14 TYPE

EFD5L/ 27-E E14EFD5D/ 65-E E14EFD7L/ 27-E E14EFD7D/ 65-E E14EFD9L/ 27-E E14 3UEFD9D/ 65-E E14 3U

2,7006,5002,7006,5002,7006,500

557799

404040404040

200/240200/240200/240200/240200/240200/240

50/6050/6050/6050/6050/6050/60

250220390350560510

6,0006,0006,0006,0006,0006,000

202020202020

848484848484

3-Band Warm White3-Band Daylight3-Band Warm White3-Band Daylight3-Band Warm White3-Band Daylight

E14E14E14E14E14E14

E27 Type

E14 Type

220/240V GLOBE TYPE

EFG21L/27-EEFG21D/65-EEFG21L/27-E B22EFG21D/65-E B22

2,7006,5002,7006,500

21212121

90909090

200/240200/240200/240200/240

50/6050/6050/6050/60

1,2001,1001,2001,100

6,0006,0006,0006,000

20202020

84848484


145145145145

E27E27B22B22

Product Order Code

ColorTemperature

(k)

Watts(w)

Base SupplyVoltage

(V)

Frequency(Hz)

InitialLumens

(lm)

AverageLife(h)

Std.Pkg.Q'ty



OverallLength(mm)

9898

108108113113

Note: *B22 base is available

Product Order Code

ColorTemperature

(k)

Watts(w)

Base SupplyVoltage

(V)

Frequency(Hz)

InitialLumens

(lm)

AverageLife(h)

Std.Pkg.Q'ty



OverallLength(mm)

Product Order Code

ColorTemperature

(k)

Watts(w)

Base SupplyVoltage

(V)

Frequency(Hz)

InitialLumens

(lm)

AverageLife(h)

Std.Pkg.Q'ty



OverallLength(mm)

��

FPL-G TYPE FDL-G TYPE

FDL-G 10W/27FDL-G 10W/40FDL-G 10W/65FDL-G 13W/27FDL-G 13W/40FDL-G 13W/65FDL-G 18W/27FDL-G 18W/40FDL-G 18W/65FDL-G 26W/27FDL-G 26W/30FDL-G 26W/40FDL-G 26W/65

2,7004,0006,5002,7004,0006,5002,7004,0006,5002,7003,0004,0006,500

10101013131318181826262626

12.512.512.512.512.512.512.512.512.512.512.512.512.5

630600570950950855

1,3001,3001,1401,7801,7801,7801,680

8,0008,0008,0008,0008,0008,0008,0008,0008,0008,0008,0008,0008,000

50505050505050505050505050

3-Band Warm White3-Band Cool White3-Band Daylight3-Band Warm White3-Band Cool White3-Band Daylight3-Band Warm White3-Band Cool White3-Band Daylight3-Band Warm White3-Band Warm White-3,000k3-Band Cool White3-Band Daylight

G24d-1G24d-1G24d-1G24d-1G24d-1G24d-1G24d-2G24d-2G24d-2G24d-3G24d-3G24d-3G24d-3

939393

135135135150150150150150150150

27272727272727272727272727

FPL-G 7W/27FPL-G 7W/40FPL-G 7W/65FPL-G 9W/27FPL-G 9W/40FPL-G 9W/65FPL-G 11W/27FPL-G 11W/40FPL-G 11W/65

2,7004,0006,5002,7004,0006,5002,7004,0006,500

777999

111111

11.711.711.711.711.711.711.711.711.7

400400360550580500900900810

8,0008,0008,0008,0008,0008,0008,0008,0008,000

505050505050505050

3-Band Warm White3-Band Cool White3-Band Daylight3-Band Warm White3-Band Cool White3-Band Daylight3-Band Warm White3-Band Cool White3-Band Daylight

G23G23G23G23G23G23G23G23G23

112112112136136136213213213

272727272727272727

848484848484848484

84848484848484848484848484

FPL-G / FDL-G lamps have a two pin base with a built in starter.It is compact design and 8,000 hours long life offers flexibilityof lighting fixture design.

ProductOrder Code

ColorTemperature

(k)

Watts(w)

Base InitialLumens

(lm)

AverageLife(h)

Std.Pkg.Q'ty.


Color DescriptionBulbDia

(mm)

BulbLength(mm)

Glass TubeDia

(mm)

FPL-G/FDL-G Built In Starter Type

Notes: 1. Programed start type ballast is required for operation2. Use with high-frequency operation fixtures

Notes: 1. Programed start type ballast is required for operation2. Use with high-frequency operation fixtures

High Output Hf U-Line 105WThis is a slim, compact fluorescent lamp designed for high frequencyillumination, and consists of a fluorescent tube approximately 17 mm indiameter formed into U shape. This is around half the length and diameter ofstandard 110 W models, and has a total flux of 11,000 lm, with a lampefficiency of 105lm/W (for FHP105). The 3-band phosphor type fluorescentlamp renders colors bright and attractive, as well as offering cost and energysavings.

Awarded the 1998 Good Design Award. (FHP105WW, EN)

FHP 32EW GU 4,200 32 2,900 12,000 20 3-Band Cool WhiteGY10q-941217.5 0.255 84

Hf U-Line Series

Product OrderCode

FHP 105EWW GU 3,500 105 11,000 20,000 10 3-Band White 3500

ColorTemperature

(K)

Watts(W)

BulbLength(mm)

BulbDia

(mm)

GY10q-12

Base

1,15017.5

InitialLumens

(lm)

0.430

Rated LampCurrent(A)

AverageLife(h)

Std.Pkg.Q'ty.

Color Description

84

ColorRenderingIndex(Ra)

Product OrderCode

ColorTemperature

(K)

Watts(W)

BulbLength(mm)

BulbDia

(mm)Base Initial

Lumens(lm)

Rated LampCurrent(A)

AverageLife(h)

Std.Pkg.Q'ty

Color DescriptionColorRenderingIndex(Ra)

��

FML TYPE

FPL TYPE

FML27EX-LFML27EX-N

2727

16.716.7

72.872.8

142142

GX10q-4GX10q-4

3,0005,000

1,6001,600

6,0006,000

55

8484

3-Band Warm White3-Band Natural White

FPL13EX-LFPL13EX-NFPL18EX-NFPL27EX-LFPL27EX-NFPL30EX-L

3,0005,0005,0003,0005,0003,000

131318272730

15.515.520202024

3333

42.542.542.551

177177216243243275

GX10q-2GX10q-2GY10q-3GY10q-4GY10q-4GY10q-4

840840

1,1201,8001,8002,000

6,0006,0007,5007,5007,5007,500

555555

848484848484

3-Band Warm White3-Band Natural White3-Band Natural White3-Band Warm White3-Band Natural White3-Band Warm White

Product OrderCode

ColorTemperature

(k)

Watts(w)

Base InitialLumens

(lm)

AverageLife(h)

Std.Pkg.Q'ty.



BulbLength(mm)

GlassTube Dia

(mm)

It is compatible with traditional ballasts and electronic ballasts.

FML Compact Fluorescent Lamp Series

FPL Compact Fluorescent Lamp Series

100

80

60

40

20

0380 400 500 600 700 780

En

erg

y Ratio

(%)

Wavelength (nm)

EX-N : 3-Band Natural White

Spectral energy distribution graphs

100

80

60

40

20

0380 400 500 600 700 780

En

erg

y Ratio

(%)

Wavelength (nm)

EX-L : 3-Band Warm White

Lamp base

GX10q GY10q

FPL Series is not only as bright as fluorescent lamps but the size is only 1/2 or 1/3 of fluorescent lamps.

100

80

60

40

20

0380 400 500 600 700 780

En

erg

y Ratio

(%)

Wavelength (nm)

EX-N : 3-Band Natural White

Spectral energy distribution graphs

100

80

60

40

20

0380 400 500 600 700 780

En

erg

y Ratio

(%)

Wavelength (nm)

EX-L : 3-Band Warm White

Lamp base

GX10q

Product OrderCode

ColorTemperature

(k)

Watts(w)

Base InitialLumens

(lm)

AverageLife(h)

Std.Pkg.Q'ty.



BulbLength(mm)

GlassTube Dia

(mm)

��

Color Energy Saving Lamps(Spiral Type) ��

EFS15G-EEFS15B-EEFS15R-EEFS25G-EEFS25B-EEFS25R-E

151515252525

484848555555

200/240200/240200/240200/240200/240200/240

50/6050/6050/6050/6050/6050/60

1,460610720

2,340990

1,110

6,0006,0006,0006,0006,0006,000

GreenBlueRedGreenBlueRed

104104104122122122

E27E27E27E27E27E27

Product Order Code

Watts(w)

BaseLampShape

Color Energy Saving Lamp (Spiral Type)

InitialLumens

(lm)

AverageLife(h)

Color DescriptionSupplyVoltage

(V)

Frequency(Hz)

BulbDia

(mm)

OverallLength(mm)

Caution for safetyNot suitable for the use with appliances equipped with dimmers or remote control devicesDo not use with appliances that are sealed or nearly sealed.

The Color CFL helps to save 80% on power consumption. There are colors in Red, Blue or Green available for lighting decoration.

Perfect use in shops, entertainment venues, restaurants, festivals or special events.

�0

Fluorescent Lamps��

Inner

FL4 DFL4 WFL4 WWFL6 DFL6 WFL6 WWFL8 DFL8 WFL8 WWFL10 DFL10 WFL10 WWFL15 DFL15 WFL15 WWFL20T8D/18*FL20T8W/18*FL20T8WW/18*FL30T8DFL30T8WFL30T8WWFL40T8D/36*FL40T8W/36*FL40T8WW/36*FL20T9D/19*FL20T9W/19*FL40T9D/38*FL40T9W/38*

6,5004,2003,0006,5004,2003,0006,5004,2003,0006,5004,2003,0006,5004,2003,0006,5004,2003,0006,5004,2003,0006,5004,2003,0006,5004,2006,5004,200

444666888

10101015151518181830303036363619193838

15.515.515.515.515.515.515.515.515.525.525.525.525.525.525.525.525.525.525.525.525.525.525.525.528.028.028.028.0

G5G5G5G5G5G5G5G5G5

G13G13G13G13G13G13G13G13G13G13G13G13G13G13G13G13G13G13G13

0.1620.1620.1620.1470.1470.1470.1700.1700.1700.2300.2300.2300.3000.3000.3000.3700.3700.3700.3650.3650.3650.4300.4300.4300.3500.3500.4100.410

95110110220245245350420420440500500760875875

1,0901,2001,2002,0002,3002,3002,5003,1003,1001,0701,2302,7003,100

6,0006,0006,0007,5007,5007,5007,5007,5007,5007,5007,5007,5007,5007,5007,500

12,00012,00012,00012,00012,00012,00020,00020,00020,00012,00012,00020,00020,000

74616074616074616074616074616072616072616072616072617261

100100100100100100100100100252525252525---------------------------------------

134.5134.5134.5210.5210.5210.5287.0287.0287.0330.0330.0330.0436.0436.0436.0588.7588.7588.7893.6893.6893.6

1,198.01,198.01,198.0

588.7588.7

1,198.01,198.0

60060060060060060060060060020020020020020020025252525252525252525252525

Straight Type

Circular Type6,5004,2006,5004,2006,5004,2006,5004,200

2121282830303838

T-9T-9T-9T-9T-9T-9T-9T-9

29.029.029.029.029.029.029.029.0

G10qG10qG10qG10qG10qG10qG10qG10q

0.3800.3800.6200.6200.4350.4350.4200.420

1,0801,2501,5501,7701,8902,1502,0002,290

9,0009,0009,0009,0009,0009,0009,0009,000

7461746174617461

------------------------

DaylightCool WhiteDaylightCool WhiteDaylightCool WhiteDaylightCool White

210.0210.0230.0230.0300.0300.0406.0406.0

3030303020201010

Pre - heat start lamps use a "starter switch" which operates only atthe moment the lamp is switched on to pre-heat the cathodes. Theuse of this starter permits more economical ballast designs.Among all fluorescent lamps, this is the most economical typewith long life, high lumen output and low initial cost.

FCL 22D/21*FCL 22W/21*FCL 30D/28*FCL 30W/28*FCL 32D/30*FCL 32W/30*FCL 40D/38*FCL 40W/38*

T-5T-5T-5T-5T-5T-5T-5T-5T-5T-8T-8T-8T-8T-8T-8T-8T-8T-8T-8T-8T-8T-8T-8T-8T-9T-9T-9T-9

DaylightCool WhiteWarm WhiteDaylightCool WhiteWarm WhiteDaylightCool WhiteWarm WhiteDaylightCool WhiteWarm WhiteDaylightCool WhiteWarm WhiteDaylightCool WhiteWarm WhiteDaylightCool WhiteWarm WhiteDaylightCool WhiteWarm WhiteDaylightCool WhiteDaylightCool White

ProductOrderCode

ColorTemperature

(k)

Watts(w)

Base InitialLumens

(lm)

AverageLife(h)

Std.Pkg.Q'ty.ColorRenderingIndex (Ra)

Color DescriptionDia(mm)

Length(mm)

Shape Rated Lamp Current

(A)

Pre-heat Start Fluorescent Lamps

Outer

��

FL10EX-N-ZFL15EX-N-ZFL20T8EX-D/18*FL20T8EX-N/18*FL40T8EX-D/36*FL40T8EX-N/36*

FCL22EX-D/21*FCL32EX-D/30*

5,0005,0006,5005,0006,5005,000

6,5006,500

330.0436.0588.7588.7

1,198.01,198.0

210.0300.0

G13G13G13G13G13G13

G10qG10q

0.2300.3000.3700.3700.4300.430

0.3800.425

555970

1,3001,3503,2503,350

1,2202,360

7,5007,500

12,00012,00020,00020,000

9,0009,000

888884848484

8484

101025252525

3020

3-Band Natural White3-Band Natural White3-Band Daylight3-Band Natural White3-Band Daylight3-Band Natural White

3-Band Daylight3-Band Daylight

Straight Type

Circular Type

FHF17EX-DFHF32EX-DFHF32EX-CW

Three Band Type

Note : Measurement are made by high frequency operation.

FHF Lamps(T8 Rapid start energy-saving)

Three Band Phosphor Type Fluorescent Lamps

101518183636

2130

T-8T-8T-8T-8T-8T-8

T-9T-9

25.525.525.525.525.525.5

29.029.0

FHF lamps achieves maximized energy efficiency by operating with T8 rapid start ballast or electronic ballast.

3-Band Daylight3-Band Daylight 3-Band Cool White

6,5006,5004,100

173232

T-8T-8T-8

25.525.525.5

588.71,198.01,198.0

1,3203,0103,200

20,00020,00020,000

848484

252525

G13G13G13

0.2550.2550.255

ProductOrderCode

ColorTemperature

(k)

Watts(w)

Base InitialLumens

(lm)

AverageLife(h)

Std.Pkg.Q'ty.



Length(mm)


(A)

ProductOrderCode

ColorTemperature

(k)

Watts(w)

Base InitialLumens

(lm)

AverageLife(h)

Std.Pkg.Q'ty.



Length(mm)


(A)

High Output Fluorescent Lamps-Rapid Start(FLR-H)

Note: Use with low resistance cathode type fixtures

With 3 types of phosphor color - blue,green and red, color performance (the waythat the color looks) is vastly improved and color is reproduced vividly.

Color performance, where the quality oflight has become luxuriant, is obtained bythese lamps with the ideal conditions to meet your needs for high quality, authentic-ity and nature.

Available with 2 sizes and 2 colors forany kinds of applications, including offices, conference rooms, stores and schools.

TOSHIBA High output Lamps are of the rapid start type 110 watts. These high output lamps provide a light output 3 times that of a general 40 watts lamp.

High output lamps are most suitable for places where concentrated, bright illumina-tion is required.

FLR110H D/A Daylight6,500 110 T-12 38 2,367 7,800 12,000 74 10R17d 0.800

ProductOrderCode

ColorTemperature

(k)

Watts(w)

Base InitialLumens

(lm)

AverageLife(h)

Std.Pkg.Q'ty.



Length(mm)


(A)

��

Color Lamps

RedBright RedBlueGreenYellowDeep YellowRedBlueGreenYellowDeep YellowRedBright RedBlueGreenYellowDeep Yellow

T-8T-8T-8T-8T-8T-8T-8T-8T-8T-8T-8T-8T-8T-8T-8T-8T-8

25.525.525.525.525.525.525.525.525.525.525.525.525.525.525.525.525.5

588.7588.7588.7588.7588.7588.7893.6893.6893.6893.6893.6

1,198.01,198.01,198.01,198.01,198.01,198.0

G13G13G13G13G13G13G13G13G13G13G13G13G13G13G13G13G13

0.3700.3700.3700.3700.3700.3700.3650.3650.3650.3650.3650.4300.4300.4300.4300.4300.430

12,00012,00012,00012,00012,00012,00012,00012,00012,00012,00012,00020,00020,00020,00020,00020,00020,000

2525252525252525252525252525252525

7 colors variation (Red, Deep red, Bright red, Blue, Green, Yellow and Deep yellow) providesattractive colorful decoration in shops,restaurants, festivals or special events.

FL20T8RE/18*FL20T8BRE/18*FL20T8B/18*FL20T8G/18*FL20T8Y/18*FL20T8DY/18*FL30T8REFL30T8BFL30T8GFL30T8YFL30T8DYFL40T8RE/36*FL40T8BRE/36*FL40T8B/36*FL40T8G/36*FL40T8Y/36*FL40T8DY/36*

1818181818183030303030363636363636

ProductOrderCode

ColorTemperature

(k)

Watts(w)

Base AverageLife(h)

Std.Pkg.Q'ty.

Dia(mm)

Length(mm)


(A)

Red

Deep Red

Bright Red

Blue

Green

Yellow

DeepYellow

��

Natural DaylightNatural DaylightNatural DaylightNatural Daylight

Natural Color Evaluation Lamps

Aquarium / Plant Lamps

Insect Repellent Fluorescent Lamps

FL10BRFFL15BRFFL20T8BRF/18*FL30T8BRFFL40T8BRF/36*

FL20T8DY/18*FL30T8DYFL40T8DY/36*

Deep YellowDeep YellowDeep Yellow

The Natural Color Evaluation lamps arethe world's best color rendering lamps.This is made possible by a color renderingindex of Ra=99 which is above 90 andspecial color rendering indices of R9 toR15. The color temperature of 5,000K isclosest to that of daylight and thebrightness is a remarkable of 2,200 lumens.

The inside of the tube is coated with ayellow pigment to cut out wavelengthsbelow 450nm that tend to attract insects.

FL 6N-EDLFL10N-EDLFL20N-EDLFL40N-EDL

5,2505,2505,0005,000

6102040

T-5T-8

T-10T-10

15.525.532.532.5

210.5330.0580.0

1,198.0

G5G5

G13G13

0.1470.2300.3600.420

170370900

2,250

5,0005,0005,0005,000

99999999

10025------

600200

2525

For AquariumRed and blue light components arebalanced to provide the light required byboth plants and tropical fish. The growthand health of water plants is thus

For PlantMost plants with green leaves mustabsorb sunlight, especially the red andblue components, in order to grow."Plantlux" provides these important rays.

1015203036

T-8T-8T-8T-8T-8

25.525.525.525.525.5

G13G13G13G13G13

0.2300.3000.3700.3650.430

330.0436.0588.7893.6

1,198.0

2525---------

200200

252525

160270420750

1,010

7,5007,500

12,00012,00020,000

183036

T-8T-8T-8

25.525.525.5

588.7893.6

1,198.0

G13G13G13

0.3700.3650.430

7601,2801,740

12,00012,00020,000

252525

Inner Outer

ProductOrderCode

ColorTemperature

(k)

Watts(w)

Base InitialLumens

(lm)

AverageLife(h)

Std.Pkg.Q'ty.ColorRenderingIndex (Ra)


Length(mm)


(A)

ProductOrderCode

Watts(w)

Base InitialLumens

(lm)

AverageLife(h) Inner Outer

Std.Pkg.Q'ty.Dia(mm)

Length(mm)


(A)

ProductOrderCode

Watts(w)

Base InitialLumens

(lm)

AverageLife(h)

Std.Pkg.Q'ty.


Length(mm)


(A)

In addition, the lamp life is long. A n d there is minimal heat generation andradiation compared to conventional incan-descent lamps. These lamps are mostsuitable for application where particularlyhigh color rendition is important, such asprinting plants, art galleries and studios,department stores and many others.

maintained in the proper proportion.Applicable to aquariums, growing waterplants, and many others.

These lamps are useful for both botanistsand general plant lovers as well. The plant becomes more more vivid by using these lamps. It is also suitable for decorative plants.

These lamps are ideal for using at venues where insects and pests are undesirable, such as orchards.

The radiant energy is equal to twice of that general colour fluorescent lamp with thesame wattage. This is more than sufficientfor plant growth.

��

FL20SD EDL-D65FLR40SD EDL-D65/M

6,5006,500

DaylightDaylight

D65 Color Evaluation Lamps

The world's first D65 Color Evaluationlamp for use in color comparison andinspection. Because the spectrumdistribution closely resembles naturallight, including ultraviolet, you cancompare and inspect all colors, includingconditions as natural light.

2525

9898

20,00020,000

7001,700

0.3600.420

G13G13

5801,198

32.532.5

T-10T-10

2040

ProductOrderCode

ColorTemperature

(k)

Watts(w)

Base InitialLumens

(lm)

AverageLife(h)

Std.Pkg.Q'ty.



Length(mm)


(A)

You can use it in places where a high levelof color coordination technology isrequired. It is used in textile, accessories,design, paint, dye, paper pulp and cosmetic industries.

Never expose the naked eye to light from germicidal lamps, whether direct or reflected.Do not expose skin to light from germicidal lamps, either direct or reflected.Even brief expose will result in serious damage to the eyes or skin.

Never use for normal lighting.

Warning

Caution

Germicidal Lamps

The short wavelength ultra-violet raysemitted from this lamp destroy bacteria,viruses and mold. There is no fluorescentmaterial and therefore the glass tubepasses ultraviolet rays freely. A mercuryvapor discharge is used to produce253.7nm ultra-violet rays that are powerfullygermicidal. Six types of wattage areavailable - 4, 6, 8, 10, 15 & 30 watts.

GL4GL6GL8GL10GL15GL30

468

101530

T-5T-5T-5T-8T-8T-8

15.515.515.525.525.525.5

134.5210.5287.0330.0436.0893.0

G5G5G5

G13G13G13

0.1620.1470.1700.2300.3000.355

4,0004,0004,0006,0006,0008,000

0.81.72.52.74.9

13.4

8.619.027.029.051.0

130.0

505050202010

1,000500500200200100

Warning: 1.

Note : 1.2.

These lamps are suitable for sterilizing airin hospital operating rooms, departmentstores, theatres and restaurants. Steriliza-tion of food and water is also possible.

ProductOrderCode

Watts(w)

Base AverageLife(h) Inner Outer

Std.Pkg.Q'ty.Dia(mm)

Length(mm)


(A)

UV Energy(w)

UV Irradiance(μ/cm )

Ultraviolet rays (sterilizing ray) emitted from this lamp are harmful; staring into an operating lamp for even a short period of time will damage your eyes.Avoid letting ultraviolet rays go directly into your eyes, as it causes symptoms similar to conjunctivitis. Also, when it is necessary to view a lamp in operation, be sure to look through a glass plate, thick goggles, or protective mask. Additionally, when working around strong sterilization rays, please cover your arms and face with cloth or apply an oil-base cream.

UV emission intensity is a value measured at a distance of one meter from the lamp.Compare to regular lamps, UV lamps hasten the degradation of resins.

��

Measurements are made at the room temp. of 20 C after 100 hours of burning.Numerals following slash (/) denote power consumed for the lamp.*Items are energy saving fluorescent lamps, to be named ‘WATTBRIGHTER’

Black Light Blue

FL 4 BLBFL 6 BLBFL 8 BLBFL10 BLBFL15 BLBFL20S BLBFL20S BLBFL40S BLB

Remarks

The BLB (Black Light Blue) lamps use aspecial glass filter that absorbs almost all visible light and passes near ultraviolet energy.

Warning: Ultraviolet rays emitted from Black Light Blue Lamps are not harmful (wave length under 300nm). However when working around ultraviolet rays for a long time, please wear glasses to protect your eyes.Note : 1. UV rays are adsorbed by general glass. It need to pay an attention in case of using Black Light Blue Lamps behind thick glass. 2. Normal glass (3mm thick) absorbs approximately 10% of near UV light at wavelengths over 360nm, approximately 30% at wavelengths of 340nm, and approximately 80% at wavelengths of 320nm. The effect is therefore reduced if thick glass is used. 3. UV emission intensity is a value measured at a distance of one meter from the lamp. 4. Compared to regular lamps, UV lamps hasten the degradation of resins.

468

1015202040

T-5T-5T-5T-8T-8

T-10T-10T-10

15.515.515.525.525.532.532.532.5

134.5210.5287.0330.0436.0580.0588.7

1,198.0

G5G5G5

G13G13G13G13G13

0.1620.1470.1700.2300.3000.3600.3600.420

2,0002,0002,0003,0004,0005,0005,0005,000

0.250.601.001.202.003.003.007.40

2.76.411.013.021.031.031.066.0

5050502020101010

1,000500500200200100100

60

ProductOrderCode

Watts(w)


Std.Pkg.Q'tyDia(mm)

Length(mm)


(A)

UV Energy(w)


There are many industrial applicationsfor these lamps such as photo-exposureand chemical reactions. They can also beused for the selection of minerals by fluorescence.

FL 4 BLFL 6 BLFL 8 BLFL10 BLFL15 BLFL20S BLFL20S BLFL30S BLFL40S BL

Black Light

This lamp employs photochemical andscintillation action to efficientlyradiate near-ultraviolet rays (at a peakwavelength of 352 nm) while emittingonly a small amount of visible light.

Warning : 1. Ultraviolet rays emitted from Black Light Lamps are not harmful (wave length under 300 nm). However when working around ultraviolet rays for a long time, please wear glasses to protect your eyes.

Note : 1. UV rays are adsorbed by general glass. It needs to pay an attention in case of using Black Light Lamps behind thick glasses.

468

101520203040

T-5T-5T-5T-8T-8

T-10T-10T-10T-10

15.515.515.525.525.532.532.532.532.5

134.5210.5287.0330.0436.0580.0588.7630.0

1,198.0

G5G5G5

G13G13G13G13G13G13

0.1620.1470.1700.2300.3000.3600.6100.6100.420

2,0002,0002,0003,0004,0005,0005,0005,0005,000

0.200.600.750.902.103.204.204.206.00

2.16.48.09.5

19.030.043.043.053.0

1001001002525------------

60060060020020025252525

ProducctOrderCode

Watts(w)


Std.Pkg.Q'tyDia(mm)

Length(mm)


(A)

UV Energy(w)


Since near-ultraviolet rays attract mostnocturnal flying insects, this lamp can beused as the light source in insecttraps.

��

Glow Starters��

The new TOSHIBA plastic Glow Starter has a strong resin encasement which makes it moisture-proof, provides perfect electrical insulation and is heat-resistant.

The 2 dents on the top indicate the positions of the 2 base contactors for easyinstallation, even in darkness.

The glow starter pre-heats the filaments automatically after the switch is turned on, so the fluorescent lamp lights immediately.

Toshiba manufactures a variety of glow starters to suit different types of fluorescent lamps.

Glow Starters

Product Order Code Base Std.Pkg.Q'tyDia(mm)

Length(mm)

Applicable Lamps (Operating Voltage)

FG-1PFG-1PU

FG-UPFG-1EFG-7E

P21P21

P21E17E17

2121

211717

3838

394040

E17 P21

15-30W (110V)4-30W Single (110V/127V)4-22W Series (220V/240V)

4-65W (220V)10W-30W (100V)4W-10W (100V)

2525

252525

EquivalentCross Reference

FS-2S2

FSU------------

FG-1E FL10、FL15、FL20SS/18、FL20S、FL20S、FL30S、FCL15、FCL120/18、FCL20、FCL30/28、FCL30、 GL15、FPL9、13、18、27、30、FUL14、FDL9、13、18、27、FWL13、18、27、FWL13、18、27FG-7E FL4、6、8、10、GL4、6、8、10、FUL10、FDL9、FPL6、9

Product Order Code Applicable Lamps Model

��

Ballast�0

Ballast

BL18

BL36

Standard Ballast

FL18WFL20W

FL36WFL40W

220220

220220

5050

5050

0.3700.370

0.4300.430

8.58.5

8.58.5

0.380.38

0.530.53

4.44.4

4.24.2

2020

2020

ProductOrderCode

BulbOperated

PowerFactorcosf

CompensationmF

Std.Pkg.Q'ty.

Rated Lamp Current

(A)

WattsLoss

Frequency(Hz)

Voltage(V)

130 degrees Celsius heat resistance by extra quality of enamel wire (Polyamide-imide, overcoated EIW.) covered with extra electrical resistance film (Polyester).

High efficiency of heat transfer by base wrings welding.

Working life lasts longer than 10 years because of silicon steel core welding. This makes the connecting part of firmly strong.

No noice nuisance with special glue (Cemedine Epoxy)

��

Incandescent Lamps��

LW230V 25WLC230V 50W

General Services Lamps (GSL)

Beam Lamps (PAR 38)

150150

There are two types of GSL: Clear and Diffused.Clear type is suitable for the location where requiresa glittering light like chandeliers and crystal glasses.

Diffused type with Electric Static Coating reducesglare and harsh shadows. GSL can be used at every location at home and office.

An accurately press formed reflector that stronglyfocuses the beam for a sharply defined circle ofillumination. There are many uses for accent lightingto make a certain object stand out from the environ-ment.

The lamp also has high mechanical strength for using both indoors and outdoors.

2550

230230

PSPS

6060

105105

E27E27

230477

1,0001,000

5050

CRS220V 150WCRF220V 150W

220220

121121

135135

E27E27

SpotFlood

1835

4,7002,500

1,4501,450

2,0002,000

1010

Reflector Lamps

RF220V 180WHCRF220V 270WHCRF220V 450WHC

1,5003,0005,200

2,0002,0002,000

202020

FloodFloodFlood

454545

Outdoor Use (10% Energy Saving Type)

ProductOrderCode

Watts(w)

Base InitialLumens

(lm)

AverageLife(h)

Std.Pkg.Q'ty.

BulbDia

(mm)

BulbLength(mm)

BulbShape

Rated Lamp Current

(A)

ProductOrderCode

Watts(w)

Base InitialLumens

(lm)

AverageLife(h)

Std.Pkg.Q'ty.

BulbDia

(mm)

BulbLength(mm)

Rated Lamp Current

(A)

With a built-in high-efficiency aluminum reflector,reflector lamps can be used for floodlight as well as other applications without a separate external reflector.

A wide range of illumination levels is also available tomeet a variety of uses not only in homes but also instores, display windows, factories, construction siteswherever bright illuminations is required.

ProductOrderCode

Watts(w)

Base InitialLumens

(lm)

AverageLife(h)

Std.Pkg.Q'ty.

BulbDia

(mm)

BulbLength(mm)

BulbShape

Rated Lamp Current

(A)

180270450

220220220

RRR

120135160

159209234

E27E40E40

Approx.BeamSpread

(degrees)

BeamType

Luminous intensity in Centre of

bean(cd)

Approx.Beam

Spread (degrees)

BeamType

Spot Flood

��

Compact Fluorescent LampsWARNING

CAUTION

Precautions For Safe Use of Lamps

• Do not cover lamps with paper or cloth, or place combustible materials nearby. Otherwise, you may run the risk of �re or causing the �xture to overheat. • Do not insert metal objects (e.g., hairpins, wire) or block the lamp vent holes. Otherwise, you run the risk of electric shock or the generation of smoke.• Always turn o� the lamp before replacing it or cleaning the �xtures. Otherwise, you run the risk of electric shock.• Never use the lamp in lamp �xtures with dimmer or remote control functions. Never use the lamp in �xtures with circuits, emergency lighting �xtures, guide light, or HID �xtures for mercury, sodium, or metal halide lamps. Otherwise, you run the risk of breaking the lamp, generating smoke, or damaging the ballast. Dimmer function: varies the brightness of incandescent lamps.• Never use the lamp with a DC power supply. Otherwise, you run the risk of breaking the lamp, generating smoke, or damaging the ballast.

• Never touch the lamp when it is on or immediately after turning it o� (because it is very hot). Otherwise, you run the risk of burn injury. Allow the lamp to su�ciently cool down before replacing or cleaning it, and wear protective clothing (e.g., glasses, gloves). Otherwise, you run the risk of personal injury due to a broken lamp.• Do not paint the lamp. Otherwise, you run the risk of overheating and breaking of the lamp. When colour is required, select a Color Lamp.• Check the strength of the �xture or ceiling mounting. Note that the use of desktop stand lamps or multi-lamp �xtures poses the risk of toppling or falling due to the lamp weight.• Do not use the lamp in locations subject to rain or water droplets, or where humid. Otherwise, you run the risk of breakage or insulation failure, and reduce service life.• Do not drop, hit, apply excessive force to, or otherwise damage the lamp. Take particular care when cleaning the �xture. Otherwise, you run the risk of injury from a falling lamp or broken glass fragments. • Do not use the lamp in �ammable environments (e.g., in the presence of gasoline, �ammable spray, thinner, lacquer, dust). Otherwise, you run the risk of �re or explosion.• Do not use the lamp in places subject to vibration or impact. Otherwise, the lamp may fall or its service life and luminous �ux may be reduced.• Corrosion-resistant �xtures must be used in corrosive environments (e.g., in the presence of acids). Using other �xtures may cause lamps to fall out, current leakage, or corrosion of the base. • Dust- resistant �xtures must be used in dusty environments. Using other �xtures may cause overheating or reduce lamp life.• Securely install the lamp into the socket. Otherwise, you may run the risk of lamp falling out.• Be sure to use the correct �xture to suit the lamp size (diameter and length) and weight. Otherwise, you run the risk of the lamp falling out.• Dispose used lamps without breaking them. You run the risk of injury from �ying glass fragments from lamp shatter. • Do not dismantle or modify the lamps. Glass tubes cannot be replaced.• Do not use a lamp in enclosed or semi-enclosed �xtures since this will increase the temperature and reduce lamp life. (The Neo Ball for enclosed �xtures can be used.) Open �xtures should be used. • These lamps are not suited for using in situations requiring frequent turning on and o� (e.g., by movement sensors), since this reduces lamp life. • Use lamp with the voltage speci�ed. Using a lamp with the incorrect voltage may reduce lamp life or cause faulty illumination.• Lamps other than inverter lamps (electronic ballast type) must be used at the correct power supply frequency for the region (50Hz or 60Hz). Using an incorrect power supply frequency may reduce lamp life or cause faulty illumination.• Lamps with built-in electronic ballast (EFD, EFT, EFG, and EFA) Use such lamps at ambient temperatures in the range from 5°C to 40°C. Using such lamps at temperatures below 5°C or above 40°C may cause faulty starting or reduce lamp life and luminous �ux.• Do not use lamps in extremely hot locations (e.g., near heaters). Otherwise, you run the risk of reducing lamp life or faulty illumination.• Do not spray insecticides near a lamp. Otherwise, you may run the risk of lamp discolouration, breakage, or degradation.• If the lamp �ickers repeatedly or do not illuminate correctly, turn it o� immediately and replace the lamp. Otherwise, you run the risk of the lamp overheating.• Note that interference may be experience when using a lamp near audio or visual equipment such as a radio or TV set. In such case, move the source of interference at least 1m away from the lamp.• Using a lamp near an infrared remote control TV may cause the remote control to malfunction.• Lamp requires a short warm up period to reach full light output.• The brightness and appearance of colour may vary slightly for about 20 minutes after the lamp is turned on.• Precautions on �xture design: Fixtures should not be designed so as to subject the lamp to constant drafts of air (e.g., �xtures also serving as ventilation holes). Moreover, �xtures should not be located where the lamp is subject to constant drafts of air. This may result in reduced luminous �ux.• It may not be possible to use with card key systems such as those in hotel rooms, Note that lamp life may be reduced when used with card key systems that currently use incandescent lamps. Contact Toshiba with details of the system in use.• Do not use with automatic switches (e.g., movement sensors) or semiconductor switches (e.g., time delay switches) except for bimetallic light sensor switches. Otherwise, you may run the risk of reducing lamp life or �ickering.• Do not use lamps with �xtures that have only a small gap between the lamp and re�ector. Otherwise, you may run the risk of excessively high temperature and reducing lamp life.• Always use the speci�ed wattage lamp with the corresponding �xtures (such as a socket, choke, and glow starter). There is a risk of overheating or smoking, and the lamp may not illuminate.*• Do not allow the lamp holder to spring back forcibly onto the lamp when installing the lamp in the �xture. There is a risk of breakage. *• Use the lamp with the voltage speci�ed on the �xture (or choke).*• The lamp may �icker or require some time to reach full brightness after it is turned on if the ambient temperature is low. This is not a defect.*• Small spots or blackening may appear at the tip of the lamp when it is illuminated. This is not a defect.*• The areas around the electrodes may blacken when �rst turned on. This will be cleared up after a short time and is not a defect *• Lamps contain metal granules to assist illumination. These make a noise when the lamp is shaken. This is not a defect.* * Note for handling the product describe in Page 16.

��

Fluorescent LampsWARNING

CAUTION

• Always turn the power o� before installing, removing, or cleaning. In addition to the risk of electric shock, UV lamps (germicidal lamps) present the risk of eye injury, damage to eyesight, and skin in�ammation.• Never expose the naked eye to light from germicidal lamps. Even brief exposure poses the risk of serious eye injury or damage to eyesight. Always use the appropriate safety equipment. Safety glasses or sunglasses must be worn if work involves looking at the lamp while the lamp is on.• Do not expose the skin to UV (sterilizing) light from germicidal lamps, either direct or re�ected. Even brief exposure poses the risk of skin in�ammation. Always use the appropriate safety equipment.

• Circular lamps: Do not allow the lamp holder to spring back onto the lamp when installing. Doing so may break the lamp. • Do not allow the lamp on/o� cord to spring back onto the lamp or become entwined with the lamp. Doing so may break the lamp.• Pre-heat start �uorescent lamps: Do not use in rapid-start lamp �xtures. Doing so may result in overheating. Use in pre-heat starter-type lamp �xtures.• Rapid-start �uorescent lamps: Do not use in starter-type lamp �xtures. Doing so may result in overheating. Use in rapid-start lamp �xtures.• Always use a lamp with the correct tube diameter when using waterproof �xtures. Failure to do so may result in loss of waterproo�ng and current leakage. Check the correct lamp tube diameter for the �xtures.• Do not drop or strike (subject to load), subject to excessive force, or scratch lamps. (Take particular care when cleaning �xtures.) Lamp breakage may result in injury. The safety of long 110W lamps can be improved by holding the centre of the lamps to prevent dropping. • Do not use in �ammable environments (areas where gasoline, �ammable spray, thinners, lacquer, or powder are present). Doing so may result in �re or explosion. Use an explosion proof �xture.• Always use lamps of the speci�ed watt ratings with the corresponding �xtures (such as socket, ballast, and glow starter). Doing otherwise may result in overheating or smoking, or the lamp may fail to illuminate. Check the lamp rating (size) indicated on the lamp �xture. • Never touch lamps while they are illuminated or immediately after they are switched o�. Doing so may result in burns. Allow lamps to cool su�ciently before replacing or cleaning. Wear protective clothing (such as safety glasses and gloves). Fail to do so may result in lamp breakage or injury.• Take care to avoid breaking lamps when disposing of them. Lamp breakage may result in scattering glass and injury.• Do not use in locations subject to rain or water spray, or in humid areas. Use in such environments may result in breakage. Use a waterproof �xture. • Install lamps securely into the socket (or lamp holder). Loose installation may result in dropping, overheating, smoking, or failure to illuminate due to faulty contacts. Check the sockets for looseness or gaps.• Do not cover the bulb with paper or cloth or use close to �ammable materials. Doing so may result in �re or overheating. • Use corrosion- resistant �xtures in corrosive atmosphere (such as acidic environments). Use of other lamp �xtures may result in current leakage or dropping.• Do not use lamps in locations subject to shock or vibration. Use in such locations may cause lamps to drop and shutter.• Do not paint lamps. Doing so may result in breakage or overheating. If colored illumination is required, please use a color lamp. • Use a sealed lamp �xture in dusty environment. Use of other �xtures in such environment may result in overheating, reduced service life, �re, or explosion. An explosion proof �xture should be used in explosive or �ammable dust environments. • Do not use in locations where colour fading is unavoidable (especially when using germicidal lamps). Items exposed to UV (sterilizing) light may fade or discolour. Use a lamp �tted with a UV- blocking �lm. In such environments, note that some fading may occur even when the lamp is �tted with a UV- blocking �lm.• Do not use germicidal lamps close to plants. Stunted growth may result.• Circular lamps: The base is designed to move slightly, but should not be turned with excessive force. Attempts to do so may result in breakage.• Rapid- start �uorescent lamps: Do not use with light �xtures with inadequate heat resistance, such as �xtures with translucent covers, or with power supplies susceptible to voltage surges. Use of such �xtures may result in overheating. Do not use “Watt brighter” energy-saving lamps.• Watt Brighter FL40SS/37, FLR40S/M/36, and FLR110H/A/100. These may not work in emergency lighting �xtures or guide lights. Always check the �xture speci�cations plate to ensure use of the correct lamps. They can be used if energy-saving lamp types are indicated on the lamp �xture speci�cations plate.• Use the correct �xture (ballast) for the power supply frequency. The incorrect frequency may result in persisting lamp �icker, the ends may glow red and not illuminate correctly, and the �xture may overheat. Replace the ballast if the �xture has been transferred from another location. Contact your Toshiba retailer for details. Ballast replacement is not necessary with inverter lamp �xtures.• Watt Brighter pre-heat start �uorescent lamps: Use in temperature range of 5°C to 40°C. Watt Brighter rapid-start �uorescent lamps: Use in temperature range of 10°C to 40°C. Poor starting may occur. • Watt Brighter: Poor starting may occur when used in lamp �xtures using electronic starting, brightness adjuster circuits, or electronic ballast. They can be used if energy-saving lamp types are indicated on the lamp �xture speci�cations plate. • If the lamp �ickers repeatedly or does not illuminate correctly, turn o� immediately and replace. Also check the starter. • Lamps are not suited to applications requiring frequent repeated �ickering, as they will reduce the service life.• Rapid-start (/A) type �uorescent lamps: Ground the lamp �xture (to the nearest conductor) when installing to avoid poor starting.• Avoid insecticide mists.• Germicidal lamps: The lamp �xture components should be designed for UV resistance. • Germicidal lamps: Do not use underwater, as this will lower the lamp temperature and reduce service life. Contact a maker specializing in �xtures.• Germicidal lamps: Keep the sterilizing lamp and re�ector plate clean to maintain sterilizing e�ects.• The areas around the electrodes may blacken when the lamp is �rst turned on. This should clear shortly and does not indicate a defect.• The lamp may �icker or take some time to reach full brightness after turning on if the ambient temperature is low. This does not indicate a defect.• Mercury may accumulate and reduce brightness at parts of the lamp in the direct path of a cool air�ow. This does not indicate a defect. • Use within ±10% of the voltage speci�ed for the �xture (ballast): if the voltage is too low, the lamp will not illuminate or its service life will be reduced; if the voltage is too high, service life will be reduced, and the ballast may overheat.• High frequency �uorescent lamp: T5 Circline “NEO-SLIM” FHC20/27/34 must be used with the dedicated �xtures. Use of other �xtures may result in failure to illuminate, abnormal electrical discharge, reduced service life, or �ickering.• Lamps contain metal granules to assist illumination; these will rattle when the lamp is shaken. This does not indicate a defect.

��

Incandescent LampsWARNING

CAUTION

• When a lamp is in use, do not cover it with paper or cloth or place it near any potentially �ammable objects. Doing so may cause �re. • When installing, removing or cleaning a lamp, always remember to turn o� the power beforehand to eliminate the risk of electric shock.

• Use a lamp of the proper type and wattage, as speci�ed on the lamp and the receptacle. A lamp of the wrong type may overheat or fall out of the receptacle.• Be careful not to drop, bump, twist or otherwise damage lamps, especially when cleaning them. A broken lamp is dangerous.• A lamp that is lit or which has been recently turned o� will be very hot. Never touch it with your bare hand or skin or you may burn yourself. If you want to replace or clean a lamp, wait until it has cooled.• Don’t paint the lamps; they may overheat or break.• Don’t use a lamp in any potentially �ammable ambient-air conditions (e.g. air containing gasoline, �ammable spray, thinner, lacquer fumes, or �ne dust); a �re or explosion may occur. In such locations, use lighting equipment that has an anti-explosive structure.• Install lamps securely in receptacles. An insecurely installed lamp may fall out unexpectedly.• Don’t use a lamp in locations prone to vibration or shock; it may malfunction, wear out prematurely, or fall out. • Don’t use lamp with ordinary lighting equipment in ambient air made corrosive by the presence of any acid; electrical leakage may occur or the lamp may fall out. Use lighting equipment that has an anti-corrosive structure in such locations.• Don’t use a lamp with ordinary lighting equipment in air laden with powdery dust; the lamp may overheat or wear out prematurely, or a �re or explosion may occur, Use lighting equipment that has a sealed structure in such locations. If the dust is explosive or �ammable, use equipment with an anti-explosive structure as well.• When you discard a damaged lamp, be careful not to break it. Scattered pieces of glass in air can be a serious hazard. • Use a lamp at their speci�ed voltage. A higher voltage may reduce a lamp’s service life or cause it to overheat. Lower voltage (including those associated with a dimmer) will extend lamp life. During this additional period, however, the adhesive may break down, causing the lamp’s base to come o�. We thus recommend that you replace all lamps at the end of their rated life. • Don’t use a lamp speci�ed for indoor use in locations exposed to rain, water drops or high humidity; it may break. In such locations, use lighting equipment that has a waterproof structure. Alternatively, use a lamp speci�ed for outdoor use along with lighting equipment designed to protect the lamp’s base from water.• The bases of lamps for outdoor use do not have a waterproof structure. Accordingly, if a lamp will be exposed to water or rain, use it with lighting equipment that has a waterproof structure. Otherwise, the lamp may break or the insulation may fail. • Don’t place any object near a lamp or otherwise cover it. When lit, a lamp emits considerable heat as well as light. Nearby objects may become transformed or discoloured, or �re may result.• If the base of the lamp is �xed with adhesive, the lamp’s temperature cannot exceed 165°C.• If the base of the lamp is �xed mechanically (i.e., by punching or a similar process), the lamp’s temperature cannot exceed 230°C. Lamps of this latter type include 300W and 500W re�ector lamps for outdoor use, and all beam lamps.• Direction lamps: Directional lamps must be used in the speci�ed direction. There is a risk of reduced service life, �xture overheating, base detachment, or lamp breakage.• Mini krypton lamps: Keep out of reach of small children. There is a risk of choking if swallowed or injury if broken.

High Intensity Discharge (HID) LampsWARNING

CAUTION

• Lamps with a �xed direction of light must always be oriented in that direction. There is a risk of injury from �ying glass if the lamp breaks or shatters. • Never use lamps if they are cracked. Cracking poses a risk of injury to the skin and eyes from ultraviolet light; the lamp may also fall out of the socket. If cracking is noted, turn the lamp o� and replace it immediately. • Do not use the lamps for �shing; under such conditions, the lamps may break.• Always turn o� the lamps before inserting or removing, or when cleaning the �xtures. Otherwise, there is a risk of electric shock.• Fixtures with reinforced glass or mesh guards must be employed when using metal halide lamps.• Do not cover lamps with paper or cloth, or leave �ammable materials nearby. Doing so may result in �re or overheating of the �xtures. • Always use the correct lamp (speci�ed model and wattage) for the �xture and choke. Otherwise, there is the risk of overheating, leading to smoke, �re, or injury from damage to the lamp.

• Never touch the lamps while they are illuminated, or immediately after you have turned them o�, because they will be very hot. Doing so may result in burns. Allow the lamp to cool down before replacing or cleaning it, and wear protective items (e.g. safety glasses and gloves) when doing so. Lamps may break and cause injury.• Make sure the lamp is securely inserted into the socket. Faulty installation may cause the lamp to fall out of the socket or overheat, leading to smoke. • Do not paint the lamps. Doing so may cause overheating or breakage.• Do not use the lamps where they might get wet or in high humidity. Such conditions present a risk of faulty insulation or injury from falling or broken lamps. Waterproof �xtures must be used. • Do not use the lamps with standard �xtures in places subject to a corrosive atmosphere (e.g. in the presence of acids). Doing so may result in earth leakage, or the lamps may fall from sockets. Corrosion-resistant �xtures must be used. • Mercury lamps: Do not use the lamps with standard lamp �xtures in locations subject to vibration or shock. Otherwise the lamps may fall from sockets. Vibration-resistant �xtures must be used.

��

CAUTION• Except for mercury HID lamps: Do not use the lamps in locations subject to vibration or shock. Otherwise lamps may fall from sockets.• Do not use the lamps with standard lamp �xtures in dusty locations. Otherwise the �xture may overheat, service life may be reduced, or smoke and explosion may result. Sealed �xtures must be used. Explosion-proof �xtures should be used if the dust is explosive or �ammable.• If the lamp �ickers repeatedly or does not illuminate correctly, turn the lamp o� immediately and replace it. Otherwise overheating or smoke may result.• Do not use metal halide or mercury lamps in locations where colour fading is a concern.• Do not work for long periods in close proximity to the lamp and never look directly at the lamp. There is a risk of injury to the skin and eyes from ultraviolet light. Protect the skin and eyes. • Dispose of used lamps without breaking them. There is a risk of injury from �ying glass if the lamp is broken.• When using TOSHIBA metal halide lamps or high pressure sodium lamps in existing mercury lamp �xtures, check that the choke, lighting �xtures, and insulation are not degraded before use. If they are, there is a risk of damage to the choke or current leakage. Please repair or replace.• Do not drop, hit, apply excess force, or scratch the lamps. Take care when cleaning, Lamps may break and cause injury. • Do not use in �ammable atmosphere (e.g. gasoline, �ammable sprays, thinners, lacquer, dust). Such conditions present a risk of �re or explosion. Use the appropriate lamps with explosion-proof �xtures. • Low-pressure sodium lamps: Take precautions to prevent contact with �re when disposing of used lamps. Lamps contain small amount of sodium. There is a risk of �re if the sodium droplets are exposed and come into contact with moisture. • Replace lamps by or before their service expiry date. If you do so, there is a slight risk of lamp breakage. • When using the lamps continuously, switch them o� once a week to check for problems. There is a very slight risk of choker damage due to lamp faults.• Do not hit lamps coated in �uoride resin �lm with sharp objects or clean the lamp using abrasive powder. Doing so may scratch or remove the �uoride resin �lm. • Fixture design precautions: Do not use the lamps coated in �uoride resin �lm if the lamp surface temperature exceeds 260°C. Doing so may result in breakage. Select or design suitable lamp �xtures. • Fixture design precautions: Select or design suitable lamp �xtures to ensure that the lamp base temperature does not exceed 230°C.• Make sure that the lighting circuit from the choke to the lamp (socket) does not exceed the speci�ed length.• Do not adjust the brightness of the light. If you adjust the brightness of the light you may risk of reducing the service life, causing faulty illumination, and a�ecting the lamp’s overall characteristics. (Except for certain mercury lamps and high-pressure sodium lamps)• The power supply voltage used must be within the speci�ed range (±6%). Adjust to the correct voltage.• The lamp may ho out if there is a sudden drop in voltage (of 5% or more).• Do not use in locations subject to rain or water spray, or in humid areas. There is a risk of insulation failure or injury due to breakage or falling lamps. Use waterproof �xture.

��

Primary amalgam:controls mercury vapor pressure during operation:

Secondary amalgam: starts up luminous flux rapidly when turned on:

Filament:

120

100

80

60

40

20

00 10 20 30 40 50 60

Non-control mercury: 120

100

80

60

40

20

00 2 4 6 8 10 12 14

These small lamps use the same single base construction as standard incandescent lamps, yet provide the high lamp e�ciency* of �uorescent lamps, thus yielding energy costs about 1/4 to 1/5** those of incandescent lamps.

These lamps have the same long-life design as �uorescent lamps, o�ering a service life about 6 to 10 times** those of incandescent lamps and thus reducing the need to replace lamps so frequently. Existing �xtures used for standard incandescent lamps can also be used. The heat generated is about 1/4 to 1/5 those of incandescent lamps, thus reducing the load on air-conditioning.

Three colour variations (Warm White, Cool White, and Daylight) are available to suit particular uses and desired e�ects.

* Lamp e�ciency= index of total lamp luminous �ux divided by power consumption** Compared with Toshiba White Lamp and White Ball

Principles of Compact Fluorescent Lamp Operation

Construction of Compact Fluorescent Lamps

Ambient temperature characteristics

Luminous flux startup characteristics

Features of Compact Fluorescent Lamps

Compact Fluorescent Lamps

Compact �uorescent lamps combine a compactly folded glass tube with an integral starter circuit and use the same (E27) base as standard incandescent lamps. TOSHIBA NEOBALL incorporates the starter circuit inside the cover and contains amalgam inside the glass tube. This product is available in two types, with or without the globe resembling an incandescent lamp. The latter type is suitable for use with a �tting. The starter circuit uses an inverter for high e�ciency and light weight in a compact size.

Compact �uorescent lamps generate ultraviolet rays from mercury using a discharge the same way as �uorescent lamps, and these ultraviolet rays are converted into visible light by the phosphor.TOSHIBA NEOBALL controls the mercury vapor pressure using amalgam (mercury alloy) to ensure constant brightness with increased temperature due to the compact design.

The luminosity of �uorescent lamps is a�ected by the mercury vapor pressure inside the tube. This mercury vapor pressure varies according to ambient temperature, with maximum luminosity achieved at about 20 to 25°C. If the internal �xture temperature (lamp ambient temperature) rises while the lamp is illuminated, the mercury vapor pressure may exceed the optimum level, resulting in reduced luminosity.Particularly, in compact �uorescent lamps �tted with globes (EFA type), the glass tube is folded compactly and contained inside the globe, causing the temperature of the lamp itself to rise consider-ably.To minimize the reduction in luminosity caused by this temperature rise, and �uctuations in ambient temperature, amalgam technology is employed, to ensure consistent luminosity.

TOSHIBA NEOBALL and compact �uorescent lamps use mercury control technology to suit the lamp characteristics. Conventional products, designed for high- temperature use (e.g., EFA type), and conventional types at low temperatures, may take longer to reach full luminosity.

Secondary amalgam is provided near the electrodes to ensure constant brightness immediately when the lamp is turned on.

The electrodes heat up when the switch is turned on, causing mercury contained in the amalgam to be emitted. This functions to rapidly stabilize luminous �ux startup immediately after the lamp is turned on.

Remark: Secondary amalgam technology is applied to EFA type of NEOBALL Z and 13WATT, 18WATT, EFA type of NEOBALL-E

Lum

inou

s Fl

ux:

(%)

Relationship between ambient temperature and luminous �ux:

Ambient Temperature(℃):

Non-control mercuryLow control mercury

High control mercury

High control mercury

Low control mercury

Technical Information

Improvement of luminous flux startup function of secondary amalgam

Lum

inou

s flu

x (%

)

luminous flux startup

Ambient Temperature(25°C):

Time (min)

��


Lamp Life

Color Temperature

Color Rendering Index (CRI) The Color Rendering Index (CRI) is an index that indicates how a light source can make what natural light would make appear normal.

Generally speaking, high CRI means that the light source show objects as they truly are.

Color teperature is measured in Kelvins. See the chapter of “Spectral Energy Distribution” on page 46 of this catalogue for more detailed information.

Lamp life is limited by the gradual consumption of the emitter on the �lament that occurs every time the �uorescent lamp is turned on and during operation, in addition to di�culties in radiating su�cient numbers of electrons. A �uorescent lamp that has come to the end of its life has emitter build-up on the tube walls close to the electrodes, and generating blacken-ing. Actually, in order to statistically process the deviation in lamp life, using the percentage of lamps that remain functional after a certain time has elapsed, known as the ”survival rate”, lamp life is calculated to be the average time when the survival rate falls to 50%.Actual lamp life span depends upon the characteristics of ballast and it may vary. Furthermore, under the conditions of actual use, where the lamp is being turned on and o� very frequently, or the voltage of the power supply is inappropriate, the life span can be shorter.

This life of a �uorescent lamp grows shorter the more frequently it is turned on and o�, because more emitter is consumed at the time the lamp is turned on then during operation. Turning it on once shortens the life span by about 30 to 90 minutes.The �lament coil of a �uorescent lamp was designed to exhibit ideal performance rated voltage. If the voltage of the power supply is too high, the lamp’s electrical current increases, the temperature of the �lament coil goes too high, and there is too much evaporation of the emitter. Conversely, if the voltage of the power supply is too low, starting up become unstable, with repeated blinking occurring. Also, if the temperature of a �lament coil is too low during operation, excessive vaporization of the emitter and shortening of the life span may be caused.

Fluorescent LampsThe Construction of Fluorescent lamps and The Principle at Work

Fluorescent lamps have �uorescent material applied to the inner surface of the tube’s glass wall. At both ends of the tube there are double coil or triple coil �laments made of tungsten attached to electrodes. An emitter is applied to the �lament.

In order to easily start emanation inside the tube, Argon gas (or mixed gas) under a pressure of 200 Pa to 400 Pa and a minute amount of mercury are enclosed in the tube. When it is ignited, (1)an electrical current �ows to the electrode (cathode), and when it preheats (2)heat electrons are abundantly emitted inside the tube. The heat electrons are drawn to the electrode (anode) on the opposite side, and electric discharge begins. The electrons that �ow as a result of the electric discharge (3) collide with mercury molecules inside the tube, (4) generating ultra-violet rays (253.7nm). These ultra-violet rays (5) excite the �uorescent material, and (6) radiate visible light. Depending on the �uorescent material used, white colored, noon-day colored, blue, green, and many other various colors of light are radiated.

Three Band Phosphor TypeFluorescent Lamps

The wave length that feels brightest to the human eye is in the neighbor-hood of 555nm (yellowish green). In other words, the more the light source includes light that is in the yellowish green neighborhood, the brighter it appears to be.

But, the natural light that people are accustomed to is made up of a variety of colored light, and the closer a light is to that spectrum distribution, the better its color performance is. In other words, in many cases, color performance and brightness con�ict with each other, and therefore we weren’t able to achieve these two attributes at the same time. However, by e�ectively radiating the colors of light that feel good to people’s eyes: blue, green, and red, we were able to create a lamp that has color performance along with brightness. It’s called “The Three- Band Phospher- Type Fluores-cent Lamp.”

6

45

23

1

(1) Electrode(2) Electrons (3) Mercury Atoms(4) Ultra-Violet Rays(5) Fluorescent Material(6) Visible Rays

��

100

80

60

40

20

0403020100

100

80

60

40

20

0403020100

100

90

80

70

60

0403020100

100

80

60

40

20

010987654321

Relationship Between Ambient Temperature ang Lamp Life

Higher ambient temperatures increase the lamp current, which causes the �lament to overheat with increased emitter evaporation. Conversely, if ambient temperature is too low, it will cause the lamp fails to start reliably or will increase emitter scatter due to the reduced lamp current and lower �lament temperature. The Figure on right hand side shows how lamp life shortened in both circumstances.Using �uorescent lamps in exposed �xtures will shorten lamp life, as will low ambient temperature, when the lamp tubes are cooled by direct drafts of air from air-conditioning outlets. Covers should be used on �xtures in locations subject to cool drafts of air or low ambient temperature.

Ambient Temperature Characteristics of Fluorescent Lamps (1) Light Output Characteristics

Standard �uorescent lamps are designed to give maximum brightness at an ambient temperature in the range of 20°C to 25?.An ambient temperature below this range will cause the mercury vapor pressure inside the lamp tube to decrease, thus reducing ultraviolet intensity and lamp brightness. Conversely, an ambient temperature above this range will increase the mercury vapor pressure and the ratio of ultraviolet rays reabsorbed by the mercury atoms, thus reducing lamp brightness. Consequently, the light output drops when the ambient temperature is too high or too low (as shown in the Figure).The tables on total luminous �ux and electrical characteristics in this catalog are for illumination using JIS or other speci�ed lighting equipment at 25?, unless it is indicated.Note: “JIS or other speci�ed”: includes JIS, JEL, or Toshiba standards.“Lighting equipment”: Commercial power supply, high-frequency (45 kHz) or equivalent.

The starting voltage required to turn on �uorescent lamps varies, since the mercury vapor pressure and inert gas pressure ratio inside the tube vary depending on the ambient temperature. Starting characteristics are particularly poor at reduced mercury vapor pressure due to low ambient temperature.Fluorescent lamps should be used at ambient temperatures in the range from 5°C to 40°C. The FL40 T8 and FLR110H/A/100 should be used in the range from 10°C to 40°C.

(2) Starting Characteristics

Fluorescent lamps are designed to give maximum brightness at an ambient temperature in the range from 20°C to 25°C. At cold tempera-ture such as on cold winter mornings, lamps may appear dim, �icker, or blacken at the ends of the tube due to mercury deposits when turned on. Normal operation should be restored as heating causes the room temperature to rise.

(3) Low-Temperature Characteristics

Ambient temperature and lamp

Lam

p Li

fe In

dex

(%)

Ambient Temperature (°C)

Star

ting

Volta

ge (%

)


FL40 T10, FL40 T8

Luminous �ux startup characteristics

Star

ting

Volta

ge (%

)

FL40 T10, FL40 T8


Lum

inou

s �u

x(%

)

Operation Time (minutes)

With stable luminous �ux as 100%

LF40 T10

LF40 T8

LF40 T10

LF40 T8

LF40 T8

LF40 T10

�0


Fluorescent Lamps■ Variations in Fluorescent Lamp Blackening

(1) Anode Spots

The relatively well-de�ned blackening that occurs near the electrodes is known as “anode spots”. This is caused by the scattering and adhering of emitter material (coated on the lamp electrodes) to the lamp tube’s inner walls near the electrodes over time. This form of blackening occurs over extended periods of use. Anode spots that occur relatively early on may be caused by one of the factors below. Ensure that the lamp is used correctly.

1. The lamp is frequently turned on and o�.2. The power supply voltage is too high or too low.3. The incorrect ballast is used (e.g. using starter-type lamp with Rapid Start �xture).4. Poor contact is caused by the lamp being improperly �tted in a rapid start �xture.

(2) End bandsBlackening in the form of blackish-brown bands several centimeters from the ends of the lamp and spreading towards the middle of the tube is called “end bands.” This occurs over extended periods of use and is caused by the combination of mercury with microscopic amount of gas generated by emitter vaporization when the lamp is illuminated. End bands have minimal e�ect on lamp life and brightness.

(3) EC Blackening and YellowingEC blackening is seen in Rapid Start �uorescent lamps with an electrochromic (EC) �lm applied inside, since it is caused by discoloration of the phosphor by minute discharges between the electrochromic �lm on the inner surface and mercury atoms. Yellowing is caused by a reaction between the electrochromic �lm on the inner surface and the phosphor.

These phenomena are more likely to occur in situations where the lamp is directly in the draft from air-conditioning equipment, thus cooling the tube wall and making mercury more likely to adhere. Such phenomena can be reduced by improving the operating conditions.

These phenomena are less likely to occur when using an electronic ballast (inverter).

Darkening may occur due to mercury deposits inside the �uorescent lamp tubes, but unlike the blackening phenomena described earlier, this does not a�ect lamp life or performance.

(1) Deposits Around ElectrodesThis phenomenon is seen immediately after turning a lamp on after a long period of nonuse, and caused (when the lamp is turned on) by the instantaneous vaporization and cohering of mercury deposited on the electrodes (�laments and lead wires) during transport or storage. As the lamp warms up a short while after being turned on, the mercury vaporized and the darkening disappears. Lamp performance is not a�ected.

(2) Deposits in Center of LampThis phenomenon occurs when part of the lamp is cooler than the rest, such as the center underside of the lamp, parts exposed to a draft, or parts near light-�tting louvers. This occurs due to the tendency of mercury to deposit in the coolest parts of the lamp, but does not a�ect lamp performance.

■ Fluorescent Lamp Darkening Due to Mercury Deposit

Anode Spots:

End Bands:

EC Blackening:

Yellowing:

Mercury deposits

Disappears shortly after lamp is turned on

Mercury deposits in center of lamp

��


Glow Starters■ Glow Starter Construction and Operation

■ The characteristics of �uctuations in the voltage of the power supply and its e�ects on the life span of a lamp

Since lamps are designed according to the voltage indicated on the mark, their characteristics change remarkably through �uctua-tions in the voltage of their power supply. When you use them with voltage that is higher than normal, their life span shrinks. On the other hand, with low voltage, the lamp has a longer life span, but its brightness drops and it is uneconomical. This relationship between voltage and life span is shown in the graph.

90

70

80

90

100

110

120

130

140

95 100 105 110

Initi

al L

umen

.Co

nsum

ptio

n El

ectri

c Pow

er (%

)

Initial Lumen ConsumptionElectricPower

ConsumptionElectricPower

Initial Lumen

Voltage (%V)

900

100

200

300

400

500

600

700

95 100 105 110

LifeLife

(%)

Voltage (%V)

Incandescent Lamps

(1) Base

(2) Glass tube

(3) Fixed electrode

(4) Bimetallic electrode

(5) Resin cap

(6) Anti-noisecapacitor

Glow starter are used in starter-type �uorescent lamps, and divided into E and P types depending on the base (1) con�guration. The basic construction is the same for both and consists of a �xed electrode (3) and bimetallic electrode (4) inside a central glass tube (2). This construction is protected and insulated by a resin cap.

When the switch is turned on and voltage applied, a glow discharge occurs between the �xed electrode and bimetallic electrode. The heat from this glow discharge causes the bimetallic electrode to bend until it makes contact with the �xed electrode, at which point a current �ows.

The �uorescent lamp �laments are preheated while the two electrodes are in contact, but the starter electrodes cool down due to the decreased heat, causing the bimetallic electrode to return to its original position, thus breaking contact.

At this point, a high voltage (known as an induction kick voltage) is generated by the ballasts to start (illuminate) the lamp. The P type includes an anti-noise capacitor (6) to reduce radio reception interference when turning on or using the lamp. This also assists starter operation.

Note: When the service life of the Glow starter expires, the lamp takes longer to turn on and �ickers repeatedly. The lamp life will also be reduced. Therefore, the Glow starter should be replaced when replacing the lamp. Failure to remove a life-expired lamp will cause the Glow starter to operate erratically, thus damag-ing the Glow starter and overhearing the ballast. Life-expired lamps should be promptly replaced.

��

Operation of TOSHIBA Mercury Lamps


High Intesity Discharge (HID) Lamps■ The Radiation Principle of HID Lamps

■ Operation of TOSHIBA Mercury Lamps

The mercury lamp is basically an arc tube using a ballast to control the lamp current. A choke coil is used as a simple ballast. A combination of choke coil and boost transformer must be used when the line voltage is lower than the starting voltage of the lamp. A simple starting circuit is shown, at right. The mercury vapor pressure is low when the lamp is �rst switched on so the lamp voltage is also low. This voltage increases and the current decreases as the mercury evaporates. Thus, the luminosity increases gradually and the lamp operation stabilities when the mercury is completely evaporated. The mercury lamp cannot be restarted immediately after being turned o�. This is because of the high mercury vapor pressure so a higher voltage is required to restart. As the mercury vapor pressure fall in several minutes, the lamp can be turned on. Line voltage must be kept within ±6% of the rated value although the e�ect varies with the type of ballast circuitry.

The basic principle is that when the electrons (2)discharged from the electrode ?, are pulled towards the opposite electrode, they collide with mercury atoms, (3) and those mercury atoms release light, (4)the same as a �uorescent lamp. However, because the temperature and density of the merury atoms become much higher when the lamp is lit, compared with the �uorescent light, the radiated spectrum covers various wavelengths. In other words, in the low voltage electrical discharges of �uorescent lamps, the radiated wavelength concentrates around 253.7nm ultra-violet rays. The wavelength becomes longer along with a rise in temperature and density of the mercury, and it radiates light visible to the human eye. In this way, with HID lamps that require heating inside the radiating tube, it normally takes several minutes to reach heated conditions after �ipping the switch on. Even immediately after turning o� the lights, the radiating tube returns to its original temperature, and will not light up again until the starting of electrical discharge.

(1) Ekectrode(2) Electron

(3) Mercury Atom(4) Visible Rays

0 20 40 60 80 100

10080604020

0

Operating Time (%)

Lumen Maintenance Curve of H400

Ratio with Respect to

Initial Luminous Flux (%

)

Typical Starting Circuit with Choke Coil

Choke CoilAC 200V

Switch

Starting Resistor

Starting ElectrodeMain Electrode

E�ects of Line Voltage Variatuin

Line Voltage (%)

80 90 100 110 120

160

140

120

100

80

60

40

E�ects Line Voltage Variation (%)

V

V

W

LmH400HF400X

Starting Characteristics

Lm : Luminous Flux W ℓ : Lamp WattageV ℓ : Lamp Wattage I ℓ : Lamp Current

1 2 3 4 5 6 (min)0

I ℓ

1,000900800700600500400300200100

V ℓ

20018016014012010080604020

I ℓ

2018161412108642

V ℓ

W ℓ

I ℓ

H400HF400X

��


■ Operation of TOSHIBA Self-Ballasted Mercury Lamps

The internal construction varies in accordance with whether the line voltage is 100 – 110V or 200 – 220V.

100 - 110V Line VoltageThe low line voltage allows a starting method similar to that used in �uorescent lamps. The discharge is made easy by heating the �lament for short time through the action of the bi-metal switch. The rated luminosity is obtained immediately after starting although the color may vary. (See the diagram)

200-220 Line VoltageA bi-metal switch is not required due to the high voltage. And the starting method is similar to that used for ordinary mercury lamps. The function of the �lament is identical to that of the choke coil in the mercury lamp circuit. (See the diagram)

Power Source:

Fila

men

t:

Electrode Filament:

Arc tube: 弧管 Bi-Metal Switch: Starting Resistor:

Power Source: Fi

lam

ent:

Electrode Filament:

Arc tube: 弧管

100-110V Line Voltage 200-220V Line Voltage

��


■ NH - D • L TYPE (improved color rendering type,high pressure sodium lamp D • L type)　

■ Neo-color (high-color-rendering-type/high light output type, high pressure sodium lamp)

(1) Getter

(2) Bimetal unit

(3) Starting aids

(4) Arc tube

(5) Outer jacket

NH400SD-L

(1) Getter

(4) Arc tube

(5) Outer jacket

(2) Starting Unit

(3) Starting aids

Starting Unit

Starting aidsLamp portion

200V or 100V

Lamp

200V or 100V

LampBimetal

50W/100WStarting aids

NH-D.LTYPE (NH360D.L)

(1) GetterThe lamp provides a high-performance getter that keeps a high vacuum inside the outer jacket up to the end of its life.

(2) Bimetal unitAfter lighting, the bimetal opens by heat from the arc tube, so the electric potential is not put on to the starting aids.

(3) Starting aidsThe starting aids are manufactured by winding the heat resistant metal wire around the arc tube so that the lamp can start without high voltage pulses.

(4) Arc tubeThe arc tube uses an alumina ceramics tube that has a high light-transmission. In the tube, sodium, mercury and neon-argon gas are mixed and sealed.

(5) Outer jacketThe outer jacket uses hard glass that is heat resistant so that high vacuum is kept inside. The di�usion type has di�usion coating on the inside surface.

Features:Neo-Color is a high pressure sodium lamp that provides warm white light color similar to that of incandescent lamps and a high color rendering e�ect. The lamp providesa power saving light source that is suitable for lighting objects of spaces that emphasize color appearance (color rendering properties), so it has a wide range of use, thatis, entrance halls, lobbies, stores, o�ces and wholesale markets.

Operation:In Neo Color (150 to 400 W) �lling mixture of neon-argon gas is sealed and starting aids are wound outside of the arc tube, so that the lamp does not require high voltag pulses and can be started with a source voltage of 200 V or less without failure.

(1) GetterThe lamp provides a high-performance getter that keeps a high vacuum inside the external bulb up to the end of its life.

(2) Starting UnitThe starting unit consists of bimetal and �lament, and generates a pulse voltage required for starting; it can be lit with general mercury lamp ballasts.

(3) Starting aidsMolybdenum wire is attached along the arc tube to ensure the starting of lamp. During lighting, the metal separates itself from the arc tube because it is bimetal.

(4) Arc tubeSodium, mercury and xenon are sealed in the arc tube. The alumina ceramics tube has diameter larger than the conventional one to increase the sealing pressure of xenon,so that the decrease in e�ciency due to the increase in vapor pressure of sodium can be minimized. Also, good color rendering and high e�ciency can be obtained.

(5) Outer jacketThe outer jacket uses hard glass that is heat resistant so that high vacuum is kept inside. The di�used type has di�usion coating on the inside surface.

Features:NH - D•L TYPE is most e�cient in the general light sources for illumination, and can be lit with general mercury lamp ballasts, therefore it is spreading rapidly as a preference light source of electricity conservation. But the general high pressure sodium lamp is not suitable for places where emphasize color appearance (color rendering). NH – D•L TYPE has minimized the reduction of e�ciency and greatly improved color rendering, and achieved excellent color rendering(Ra60) that is superior to that of �uorescent mercury lamps. Thus, it can be used at the places emphasizing color rendering; it also provides a light source power saving e�ect in high pressure sodium lamps.

High Intesity Discharge (HID) Lamps

��


■ Twin-Arc Tube Type (high pressure sodium lamp•Ltype)

(1) Getter

(3) Starting unit

(4) Starting aids

(5) Arc tube

(2) Outer jacket

Twin Arc Tube TYPE(NHT220TX-L)

Starting unitStarting aids

Arc tube

Mercurry lamp ballast

(1) GetterThe lamp provides a high-performance getter that keeps a high vacuum inside the outer jacket up to the end of its life.

(2) Outer jacketThe di�used type has outer jacket uses the hard glass that is heat resistant so that a high vacuum is kept inside. The di�used type has di�usion coating on the inside surface.

(3) Starting unitThe starting unit consists of bimetal and �lament, and can be lit with economical and adaptable ballasts.

(4) Starting aidsMolybdenum wire is provided along the arc tube to ensure the starting of lamp.

(5) Arc tubeIn one outer jacket, two arc tubes are housed while crossing each other at the end so that in�uence of each shadow can be minimized.

Features:By combining a special ballast, the lighting operation of two arc tubes can be equalized, so that the life of the lamps becomes 30,000 hours greater than that of conventional high pressure sodium lamps.

Operation:The lamp provides a starting unit that consists of starting bimetal and �lament. When the power is turned ON, the �lament of thestarting unit is heated, and in consequence the bimetal opens and generates energized about 3000V at both ends of the choke coil of theballast. The energized voltage in the form of pulses is superimposed on the source voltage, so that the arc tube starts discharging. After that, discharging is maintained by source voltage resulting in stable lighting of the lamp.During lighting, the starting bimetal of the starting unit is kept open.

��


■ Spectral Energy Distribution of Fluorescent Lamps

Light Color Spectral Energy Distribution

■ Light Color and Color Temperature

2,000

3,000

4,000

5,000

6,000

8,000

10,000

12,000

Color Temperature (K)

Color Temperature (K)

Among the light color that can be found in light sources there are ones with red, light blue, and many other various colors. The “color temperature” expresses the color of light in numeric form. An object (black body) gives o� light as it is heated, the color of the light gradually changes from red to yellow to white to light blue. There is a relationship between the temperature (absolute temperature K, Kelvin units) and the color. The color temperature expresses the color of light with temperature, using this relationship. The advantage of the color temperature index is that the color of light can be expresses in connection with human vision with just one number as shown in the chart to the bottom.

DayLight

WarmWhite

The spectral energy distribution graphs shown below give the luminous energy for each wavelength from the various types of lamps. The curves in the graphs indicate the continuous spectrum of the luminescence from the �uorescent material and the bars indicate the spectral lines of luminescence from mercury.

Natural Rays Arti�cial Rays

Tropical sunlight

Sunlight at noon

Full moon

Sunrise / sunset

Candle light

Super Daylight Fluorescent

Daylight Fluorescent

Natural White Fluorescent

Cool White Fluorescent

Warm White Fluorescent

Wavelength (nm) Wavelength (nm) Wavelength (nm) Wavelength (nm)



3 Band Daylight Daylight Warm White Cool White

3 Band SUPER Daylight(12000K) Super Daylight(12000K) Aquarium/ Plant (BRF) D65 Color Evaluation

Germicidal Black Light Black Light Blue Natural Color Evaluation

Energy ratio (%

)

Energy ratio (%

)

Energy ratio (%

)

Energy ratio (%

)

Energy ratio (%

)

Energy ratio (%

)

Energy ratio (%

)

Energy ratio (%

)

Energy ratio (%

)

Energy ratio (%

)

Energy ratio (%

)

Energy ratio (%

)

��

■ Spectral Energy Distribution of TOSIBA HID Lamps

100

80

60

40

20

380400 500 600 700 7800

100

80

60

40

20

380400 500 600 700 7800

100

80

60

40

20

380400 500 600 700 7800

100

80

60

40

20

380400 500 600 700 7800

100

80

60

40

20

380400 500 600 700 7800

100

80

60

40

20

380400 500 600 700 7800

100

80

60

40

20

380400 500 600 700 7800



Energy ratio (%

)

Energy ratio (%

)

Energy ratio (%

)

Energy ratio (%

)

Energy ratio (%

)

Energy ratio (%

)

Energy ratio (%

)

Energy ratio (%

)

Transparent Mercury Lamp Neosuper Chokeless Mercury Lamp HL-Neo Halide

NH-S Type Neo color (high-color-rendering type) NH-L Type

��

Fixtures

Using Fluorescent Tubes

��

T8 Fixture

T8

L W

H

TF1103Operating Voltage : 220-240V/50HzBuilt-in electronic ballastFor T8/G13 10W / 15W / 18W / 30W / 36W fluorescent lampsLight-weight aluminium housing with plastic cover and switch

ProductOrderCode

Max(Watt)

Packingpcs/ctn(cm)

Gross weight(kg)

Dimension (L x W x H) (mm)


Using TOSHIBA lamps model

TF1103TF1103TF1103TF1103TF1103

1015183036

412 x 34 x 64516 x 34 x 64669 x 34 x 64973 x 34 x 64127 x 34 x 64

20pcs / 43 x 23 x 3020pcs / 53.5 x 23 x 3020pcs / 69 x 23 x 3020pcs / 99 x 23 x 30

20pcs / 129.5 x 23 x 30

911151823

FL10DFL15D

FL20T8·12KFL30DT8·12KFL40T8·12K

T8

TF1104Operating Voltage : 220-240V/50HzBuilt-in electronic ballastFor T8/G13 18W / 30W / 36W fluorescent lampsLight-weight aluminium housing with plastic cover

ProductOrderCode

Max(Watt)

Packingpcs/ctn(cm)

Gross weight(kg)



TF1104TF1104TF1104

183036

679 x 103 x 41983 x 103 x 41

1243 x 103 x 41

20pcs / 70 x 46.5 x 2510pcs / 101 x 24 x 24.5

10pcs / 126.5 x 24 x 24.5

15.514.519.5


LW

H

�0


T5

L W

H

TF1105Operating Voltage : 220-240V/50HzBuilt-in electronic ballastFor T5/G5 fluorescent lampsWith power cord and switch6W / 8W / 24W / 21W / 28W : Tri-phosphor, high-efficiency

ProductOrderCode

Max(Watt)

Packingpcs/ctn(cm)

Gross weight(kg)


Using TOSHIBA / GE lamps model

TF1105TF1105TF1105TF1105TF1105

68

242128

285 x 22 x 43335 x 22 x 43616 x 22 x 43916 x 22 x 43

1216 x 22 x 43

40pcs / 38.5 x 33 x 3740pcs / 38.5 x 33 x 3720pcs / 64 x 33 x 19

20pcs / 94.5 x 33 x 1920pcs / 124.7 x 33 x 19

12149

1214

“TOSHIBA” FL6DC“TOSHIBA” FL8DC

“TOSHIBA” FHF24S-ED“GE” F21E/865 “GE” F28W/865

T5 Fixture

T8

TF3104Operating Voltage : 220-240V/50HzBuilt-in electronic ballastFor T8/G13 20W / 30W / 36W fluorescent lampsLight-weight aluminium housing with plastic cover

ProductOrderCode

Max(Watt)

Packingpcs/ctn(cm)

Gross weight(kg)



TF3104 20W-2TF3104 30W-2TF3104 40W-2

2 x 182 x 302 x 36

635 x 134 x 46945 x 134 x 46

1245 x 134 x 46

20pcs / 65x 57 x 2710pcs / 96 x 29 x 27

10pcs / 126 x 29 x 27

201826


LW

H

T8 Fixture

��

Using Fluorescent TubesCFL Fixture

TF2104Operating Voltage : 220-240V/50HzBuilt-in electronic ballastLight-weight aluminium housing with plastic cover and switch

ProductOrderCode

Max(Watt)

Packingpcs/ctn(cm)

Gross weight(kg)



TF2104 11WTF2104 11W-2

112 x 11

330 x 103 x 41515 x 103 x 41

20pcs / 46.5 x 35 x 2520pcs / 53.5 x 46.5 x 25

1016

FPL-G11W/65FPL-G11W/65

LW

H

G23

��

EYE Dichro-Cool Reflector Lamp

53

EYE Dichro-Cool Reflector LampMR 16 12V 50W EXN40°

1750LXØ730

190LXØ2190

440LXØ1460

20˚ 10˚ 0˚ 10˚ 20˚ (Deg)

0

1

2

3m

Precise optical design

Long Standing dichoric coating

Suitable for retail stores, lounges, offices, landscape lighting, display case, homes.

With 5000 hours of long life span and 3,050K of temperature color, EYE Dichro-Cool Reflector Lamp is your professional choice.

Ref. ANSI

EXN

Volts(V)

12

Watts(W)

50

Base

GU5.3

Std. Pkg. Qty.

12

Axis Cd(cd)

1,750

ColourTemperature

(K)

3,050

BeamAngle (°)

40

Rated Av. Life (hrs)

5,000

Model No.

JR1504

MAXILUMFluorescent Lamp Reflectors(Patent No. 5062030/5192129)

54

EYE Dichro-Cool Reflector LampMR 16 12V 50W EXN40°

1750LXØ730

190LXØ2190

440LXØ1460

20˚ 10˚ 0˚ 10˚ 20˚ (Deg)

0

1

2

3m

Precise optical design

Long Standing dichoric coating

Suitable for retail stores, lounges, offices, landscape lighting, display case, homes.

With 5000 hours of long life span and 3,050K of temperature color, EYE Dichro-Cool Reflector Lamp is your professional choice.

Ref. ANSI

EXN

Volts(V)

12

Watts(W)

50

Base

GU5.3

Std. Pkg. Qty.

12

Axis Cd(cd)

1,750

ColourTemperature

(K)

3,050

BeamAngle (°)

40

Rated Av. Life (hrs)

5,000

Model No.

JR1504

MAXILUMFluorescent Lamp Reflectors(Patent No. 5062030/5192129)

55

MAXILUMFluorescent Lamp Reflectors (Patent No. 5062030/5192129)

Advantages

• Decrease the lamps used, but increase the illumination• Save on energy as the light is not wasted but redirected;• Save your cost on fluorescent lamps and electricity as the number of fluorescent lamp can be reduced;• Environmental friendly

Specifications

2. MaterialMAXILUM Reflectors are made from a non-toxic, nonflammable gauge 26 pre-coated and pretreated galvalume material with reflective surface processed through vacuum metallizing.

3. DesignMAXILUM Reflectors were scientifically designed, engineered in reflectodynamics. It has multiple light reflective surfaces which is its principal product feature.

4. IlluminationCombined characteristics of the vacuum-metallized reflective and multi-planner surface can trap wayward light, and then re-direct it to the desired area for a consistent illumination. It reflects 85%-90% of incident light.

5. QualityWarranty: 5 years unconditionallyLongevity: As the base material of MAXILUM Reflectors is rustproof,the life span can be indefinite with good maintenance.Luminance: 11 years without efficiency reduction on its reflective characteristics.Maintenance Frequency: Clean the reflector at least twice a year Cleaning Method: Wipe the reflector by using soap and water, then wipe with soft dry cloth.

• Guarantee a 50% delamping program• Base material is rustproof• Simple and easy to install• Warranty: 5 years unconditionally

With simple installation, MAXILUM can save up to 50% number of fluorescent lamps to be used and get equal or better illumination!

MAXILUM Fluorescent Lamp Reflector is an innovative fixture with multiple light reflective surfaces. It is manufactured by using a high-tech vacuummetallizing process with its design based on reflectodynamics which redirects wasted light effectively and efficiently.

An ordinary fluorescent lamp fixture can only let the light emitted upward and sideward, thus, lots of light is wasted. However, with our fixture, the light emitted upwards and sideward is synthesized with those emitted downwards by the source towards the area to be lighted. No light is wasted and the light illumination efficiency is increased by 100% to 150%.

1. Patent SystemMAXILUM has Patent No.25264 (Invention); 8199, 7434 (Utility); 5728 (Design); and 4499529; 5062030; 5192129; registered at the Philippines and U.S. Patent offices respectively. Two more patents are pending in Japan and U.K.

The patented system is U.L. listed and approved by Lighting Sciences, Inc. at March 4, 1986 with Certified Test Report No. LSI 5272.

Test and data determined were in accordance with currentIES published procedures based on the following:1. Improved lighting of fluorescent fixture2. Improved vision3. Operational characteristics4. Photometric

Why use two lamps when one will do?

Before After

Save up to 50% off your power bill

Increase illumination efficiency by 100% to 150%.

56


Advantages

• Decrease the lamps used, but increase the illumination• Save on energy as the light is not wasted but redirected;• Save your cost on fluorescent lamps and electricity as the number of fluorescent lamp can be reduced;• Environmental friendly

Specifications

2. MaterialMAXILUM Reflectors are made from a non-toxic, nonflammable gauge 26 pre-coated and pretreated galvalume material with reflective surface processed through vacuum metallizing.

3. DesignMAXILUM Reflectors were scientifically designed, engineered in reflectodynamics. It has multiple light reflective surfaces which is its principal product feature.

4. IlluminationCombined characteristics of the vacuum-metallized reflective and multi-planner surface can trap wayward light, and then re-direct it to the desired area for a consistent illumination. It reflects 85%-90% of incident light.

5. QualityWarranty: 5 years unconditionallyLongevity: As the base material of MAXILUM Reflectors is rustproof,the life span can be indefinite with good maintenance.Luminance: 11 years without efficiency reduction on its reflective characteristics.Maintenance Frequency: Clean the reflector at least twice a year Cleaning Method: Wipe the reflector by using soap and water, then wipe with soft dry cloth.

• Guarantee a 50% delamping program• Base material is rustproof• Simple and easy to install• Warranty: 5 years unconditionally

With simple installation, MAXILUM can save up to 50% number of fluorescent lamps to be used and get equal or better illumination!

MAXILUM Fluorescent Lamp Reflector is an innovative fixture with multiple light reflective surfaces. It is manufactured by using a high-tech vacuummetallizing process with its design based on reflectodynamics which redirects wasted light effectively and efficiently.

An ordinary fluorescent lamp fixture can only let the light emitted upward and sideward, thus, lots of light is wasted. However, with our fixture, the light emitted upwards and sideward is synthesized with those emitted downwards by the source towards the area to be lighted. No light is wasted and the light illumination efficiency is increased by 100% to 150%.

1. Patent SystemMAXILUM has Patent No.25264 (Invention); 8199, 7434 (Utility); 5728 (Design); and 4499529; 5062030; 5192129; registered at the Philippines and U.S. Patent offices respectively. Two more patents are pending in Japan and U.K.

The patented system is U.L. listed and approved by Lighting Sciences, Inc. at March 4, 1986 with Certified Test Report No. LSI 5272.

Test and data determined were in accordance with currentIES published procedures based on the following:1. Improved lighting of fluorescent fixture2. Improved vision3. Operational characteristics4. Photometric

Why use two lamps when one will do?

Before After

Save up to 50% off your power bill

Increase illumination efficiency by 100% to 150%.


Applications

TOYOTA Car Maintenance Centre SM Malls for building material SM Malls for building material

TOYOTA Meeting Room

Yasaki Group Car Accessories TOYOTA Office

Unit Mart Supermarket

Garment Factory

Adamson University

MAXILUM can apply on different places like car parks, factory buildings, storehouses, hospitals, shopping malls, schools, offices, corridors, supermarkets, laboratories and banks, etc.

* Our company can provide professional advices on lamps and energy-saving without extra charge.

57

58

Limited space, with unlimited business opportunity

LED signboard is an electronic display board which is suitable for all organizations and environment. Being an excellent tool in advertising and displaying information, it has the following advantages over traditional display board or other electronic display system:

Eye catching √ With outstanding luminosity √ Can show attractive movie

Rewritable √ Display content can be adjusted at any time √ Can be used for multi-purpose

Long life span √ Generally, LED has the life-span of 100,000 hours √ Could be easily maintained, as LED Lamps can be replaced piece by piece and will not affect the operation

Energy saving √ Consumes only 1/10 of electricity as the incandescent lamp √ Operation expense relatively small

Environmental friendly √ The LED lamps contain no harmful elements like mercury, or natrium √ Disposal cost can be minimized

With its absolute advantages, LED Signboards out-perform traditional display boards. Apart from the simple functions like displaying information, launching an advertising campaign and giving instructions, LED Signboards can perform a better job with extra functions like timetelling, scoring, stock quoting and serving as a queuing system!

Queuing SystemDigital Quoting System

59


PROJECTS IN HONG KONG

As the sole agent of “IMA” LED Signboard Display System, we focus on providing 2 types of high quality service to different clienteles such as individual customers, organizations and governments:► Tailor-made service► Professional installation serviceWith our customer-oriented strategy, “IMA” LED Signboard Display System is applicable in any kind of industries and locations.

Financial Institute Hospital Car Park

School Shopping Center Shopping Mall

Cosmetician Hotel Beauty Center

60


OVERSEAS PROJECTS

Besides local market, we also expand our business to oversea markets, including Japan, United States, and Korea, etc. Based on the requests of customers, we modify our products to provide the best solutions to satisfy their needs. Some examples are:► Large display as big as 500M (L) x 8M (H);► Curved display which shows the angle of more than 180°;► Decorative display which brightens the whole city!

“H.I.S.” Project; Shinjuku;Japan

“FIELDS” Project;Chiba, Japan

“Asobi Douraku” Project;Fukuoka,Japan

“Dual Display” Project;Japan

“Racecourse” Project;Tokyo, Japan

“12M Christmas tree” Project;Tokyo, Japan

61


PRODUCT SPECIFICATION

If you are interested in our product, feel free to contact us.

Display size Tailor made

Display color ● Single-color (Red / Yellow / Green / Blue / White / etc) ● Dual-color (Red, yellow and green) ● Full-color

Dot pitch Indoor Outdoor

Display content Text / Number / Graphic / Symbols / Video

Language Multi-language (e.g.: Traditional / Simplified Chinese, English, Japanese, etc.)

Application Indoor / Outdoor

Voltage 220 / 110V

Special Function Can be used as a Score board, Timer, Queuing system, Stock quoting, etc.

: 4.75mm +: 10mm +

62

Decorative Lighting

63

Decorative Lighting

Beginning of 1995, Fu Sun started to cooperate with the decorative Lighting and LED Lamps manufacturers in designing, developing, manufacturing and marketing the decorative lighting for local Hong Kong and overseas market including Japan, Korea, and European market. One of our cooperative factories named Stronge Base Electronic, which is the largest LED lamps supplier in terms of quantity in the worldwide market.

Over the years, Fu Sun is proud of providing both concept and technical leadership in decorative lighting project with LED signboard. In 2000, we were supplying all the lighting for decorative the “Tokyo City Keiba” which was appreciated by most of Japanese Citizen that could enjoy a beautiful lighting inside the horseracing course during the year.

Fu Sun is also proud of its customer relationship and product reliability. The continuous reordering by existing customers for upgrading and new projects is testimony to our determination not to sacrifice our high standards for lower manufacturing cost. Fu Sun’s commitment to long term customer partnerships is marked by the constant effort of our sales and marketing and engineering staff to keep in touch with all users by listening to their comments and suggestions.

Fu Sun provides all our customers with comprehensive support and services, including all aspects of system planning, installation and customer training. Should there be any inquires, please feel free to contact us by e-mail [email protected]. We are always of service with you.

64

Decorative Lamp

Pearl LampModel Series : FS-DL-PL

Length : 10 m to 100 m

No. of Bulbs : 48 to 300 bulbs

Bulb Spacing : 10cm to 25cm

Bulb Type : B22 / E27

Voltage : 100-120V / 220-240V

Net LampModel Series : FS-DL-NL

Colors Available : Clear / Red / Yellow / Blue / Green


No. of Channel : 1, 2 or 4 channels

Shape : Rectangular / Star / Round / Triangular / V Shape / U Shape

Voltage : 100-120V / 220-240V

Curtain LampModel Series : FS-DL-CL

Size : 2m (W) x 3.1m (H)

No. of Bulbs : 720

No. of Bulbs / Strings : 26

No. of Strings : 20

Voltage : 100-120V / 220-240V


Icicle LightModel Series : FS-DL-IL


No. of Bulbs : 200

Voltage : 100-120V / 220-240V


65

Decorative Lamp

LED RGB TubeModel Series : FS-DL-RGB

Waterproof Standard : IP65

Color of the tube : Transparent / Milky

Color of LED : Red, Green and Blue

Voltage : 12V / 100 – 120V / 220 – 240V

Star LampModel Series : FS-DL-LS


Length : 5 m to 15 m


Structure : 1, 2 or 4 channels

Voltage : 24V / 100-120V / 220-240V

RopelightModel Series : FS-DL-RL

No. of Bulb / Meter : 36 bulbs

Shape : Round / Flat

Diameter : 10mm / 13mm / 16mm

Number of Wire : 2 or 3

Voltage : 12V / 24V / 100-120V / 220-240V

Length Available : 10 m to 100 m

Colors Available Bulb: Clear / Red / Yellow / Blue / Green PVC: Clear / Red / Yellow / Blue / Green /

Orange / Purple / Fluorescent Green / Fluorescent Orange / Fluorescent Pink

Wall Washer Model Series : FS-DL-WW

Housing : Aluminium

Light source : High power LED

Color of LED : RGB / White / Blue

Voltage : 12V / 100 – 120V / 220 – 240V

66

LED Decorative Lamp

LED Net LampModel Series : FS-DL-LNL

Colors Available : White / Red / Yellow / Blue / Green


Shape : Rectangular

Voltage : 12V/ 24V / 100V-120V / 220-240V

LED Star LampModel Series : FS-DL-LLS

Colors Available : White / Red / Yellow / Blue / Green


No. of Bulbs Available : 100 to 600 bulbs

Structure : 1, 2 or 4 channels

Voltage : 24V / 100-120V / 220-240V

LED Tape LampModel Series : FS-DL-LTL

Colors Available LED : White / Red / Yellow / Blue / Green

Length : 100 m

No. of Bulbs : 492 to 1,998 bulbs

Bulb Spacing : 5 cm to 20 cm

Voltage : 12V / 24V

LED RopelightModel Series : FS-DL-LRL

No. of Bulb / Meter : 36 bulbs

Shape : Round

Diameter : 10mm / 13mm

Number of Wire : 2 or 3

Voltage : 12V / 24V / 100-120V / 220-240V


Colors Available Bulb: Clear / Red / Yellow / Blue / Green PVC: Clear / Red / Yellow / Blue / Green /

Orange / Purple / Fluorescent Green / Fluorescent Orange / Fluorescent Pink

LED Cluster LampModel Series : FS-DL-CLUSTER

Distance between clusters : 70mm or above

No. of LED Available : 8pcs (Red x 4, Green x 2, Blue x 2)

Size : ø 45mm x 15mm

Voltage : 12V / 100 – 120V / 220-240V

Waterproof standard : IP65

67

GOME Project in Hong Kong

Tokyo Bay Project in Japan

Yokohama Project in Japan

Greenfield Project in Hong Kong

WHS31 Project in Hong Kong ICA Church Project in Hong Kong

Yokkaichi Keirin Project in Japan Mitsubishi Project in Japan

Tin Shui Wai Project in Hong Kong Tama-Plaza Project in Japan

Narita Airport Project in Japan Chinatown Project in Japan

Our Decorative Lighting Job Reference

68

Character lantern

DuckLantern

Traditional lantern

PikachuLantern

Japanese Project

Hello KittyLantern

MushroomLantern

MermaidLantern

Features:1. Material: metal, cloth, paper or etc……2. Can put light inside3. With the function of festivaldecoration, gift, promotion......4. Any designs are welcome

69

FS-DL-MOTIF-001

FS-DL-MOTIF-004

FS-DL-MOTIF-007 FS-DL-MOTIF-008 FS-DL-MOTIF-009

FS-DL-MOTIF-005 FS-DL-MOTIF-006

FS-DL-MOTIF-002 FS-DL-MOTIF-003

Motif

Tailor-made design available for motif.

70

Profession專業

One Stop Signage Solution

Profession

Innovation

Services

71

We have extensive experience in the production of light boxes for advertisement displays. We could custom make light boxes with unique designs and accommodate architectural challenges.

Our energy-efficient light box systems make use of TOSHIBA Fluorescent Lamps (Advertising- Light-Box-used Super Daylight Lamp) which help you dramatically cut down the electricity bills and attract people’s attention more easily.

72

Lamp Tester

Material: Quality AcrylicTailor-made design available for product displayFree socket bases combination (e.g.: E14 / E17 / B22, etc.)Light in weight, flexible and easily portableLogos silk printing for marketing purpose on requestEye-catching display effect

73

Emergency fluorescent lamp / Rechargeable Emergency Fluorescent Lamp has been very popular in many countries. It is very useful in many emergency situations – providing safety in the dark, earthquake, fire, building collapse, terror attack, electricity cut-off, etc. The light will automatically light on when it is taken off from the holder. Also, it is light and portable; users can carry it easily by hand or putting it into pocket in order to assist them to leave dangerous area.

ApplicationsThe product is widely used in hotels,houses, schools, restaurants, banks, etc. Users are advised to put it at convenience places such as bed side, door, corridor, etc for easy access.

Emergency Fluorescent Lamp / Rechargeable Emergency Fluorescent Lamp

74

Emergency fluorescent lamp / Rechargeable Emergency Fluorescent Lamp has been very popular in many countries. It is very useful in many emergency situations – providing safety in the dark, earthquake, fire, building collapse, terror attack, electricity cut-off, etc. The light will automatically light on when it is taken off from the holder. Also, it is light and portable; users can carry it easily by hand or putting it into pocket in order to assist them to leave dangerous area.

ApplicationsThe product is widely used in hotels,houses, schools, restaurants, banks, etc. Users are advised to put it at convenience places such as bed side, door, corridor, etc for easy access.

Emergency Fluorescent Lamp / Rechargeable Emergency Fluorescent Lamp

Specification

Lamp : Built-in Super bright fluorescent lamp (Toki Brand 4W F4T5D fluorescent tube) and reflectorSize (4W Model) : 6.2 x 5.2 x 20cmBattery : 4pcs ‘AA’ size batteriesAvailable Color : Black, Yellow, Blue, White and Red

Features

Smallest and lightest in size and weight comparing with similar products in the marketBrighter than other similar emergency light using bulbCan be portable or fixed on wallSilk printing logo for promotion is availableEasy to install

Specification

Lamp : Built-in Super bright fluorescent lamp (Toki Brand 4W F4T5D fluorescent tube) and reflectorSize (4W Model) : 6.2 x 5.2 x 20cmWeight : 300g (including batteries and AC universal adaptor)Battery : 4pcs of 1.2V Ni-Mh “AA” size batteries (1000-1300mAh is recommended)Lifetime : Around 60 minutes (After every fully charging)Available Color: Black, Yellow, Blue, White and Red

Features

Can be portable or fixed on wallSilk printing logo for promotion is availableWith AC universal adaptor / car plugSmallest and lightest in size and weight rechargeable emergency fluorescent lamp in marketEasy to install Brighter than other similar rechargeable emergency lamp using bulb

Emergency Fluorescent Lamp

Rechargeable Emergency Fluorescent Lamp

75

Cosmedico

WHAT ARE THE BENEFITS OF SUNBATH?

WHY SHOULD WE CHOOSE COSMEDICO SUN TANNING LAMP?

Cosmedico Sun Tanning Lamp No.1 in Sales Volume in USA!

Want to have a sunbath in anytime? Cosmedico Sun Tanning Lamp can help! Our company provides different models and accessories of Cosmedico Sun Tanning Lamp, including fluorescent lamp and fixtures. Customers can choose high or low pressure lamps, and even other sun tanning lamps depending on your special needs. Besides, various types of fixtures like ballasts, starters, igniters and cleaners are available for your own choice.

Many people love to have sunbathing as they find themselves relaxed. The warm feeling under the sun is soothing and enjoyable. Apart from the pleasure, sunbathing also brings lots of benefits to us, such as:

1. To promote metabolic process2. To stimulate Vitamin D3 to form in our bodies3. To enhance our immune system4. To promote our blood circulation5. To produce more nutrient to our bodies6. Certain amount of UVB can replenish phosphorous and calcium in our bodies7. To prevent skeletal disorders effectively (e.g. Osteoporosis and Osteomalacia, etc)

Unstable weather conditions often ruin your plan. Cloudy sky and pouring rain are always the enemies of sunbath; unless you have Cosmedico Sun Tanning Lamp. No matter how the weather condition changes, an indoor tanning bed in salon ensures that the sunbath practices smoothly in anytime!

It’s easy to have sunburn after sunbathing! The problem of sunburn can be erased by having Cosmedico Sun Tanning Lamp, as the individual components of the spectrum can be precisely adjusted to the needs of the users. It can ensure the intensity of sun light is suitable for the users and skin is not overexposed.

I cannot achieve my expected skin color but have my skin reddened!

In fact, it takes longer for tanning than that required for skin reddening. But users of our lamps can have a regular sunbathing which can:

1. reduces the preliminary stages of skin reddening quickly;

2. let the tan constantly build itself up through repeated exposure;

As a result, users can have their desirable tanned skin without burning!

It’s GREEN! Some of the Cosmedico Sun Tanning Lamps have passed an Environmental Protection Agency Test (Effective since 6th, Jan, 2000) for hazardous waste determination: Toxic Characteristic Leaching Procedure (TCLP). The lampsapparently designated as passed the TCLP can be easily identifiable by the “signal” sign on the lamp etch. They are no longer considered hazardous waste and can be disposed of as normal refuse.

1.

2

3.

4.

76

WHAT ARE THE BENEFITS OF SUNBATH?

WHY SHOULD WE CHOOSE COSMEDICO SUN TANNING LAMP?

Cosmedico Sun Tanning Lamp No.1 in Sales Volume in USA!

Want to have a sunbath in anytime? Cosmedico Sun Tanning Lamp can help! Our company provides different models and accessories of Cosmedico Sun Tanning Lamp, including fluorescent lamp and fixtures. Customers can choose high or low pressure lamps, and even other sun tanning lamps depending on your special needs. Besides, various types of fixtures like ballasts, starters, igniters and cleaners are available for your own choice.

Many people love to have sunbathing as they find themselves relaxed. The warm feeling under the sun is soothing and enjoyable. Apart from the pleasure, sunbathing also brings lots of benefits to us, such as:

1. To promote metabolic process2. To stimulate Vitamin D3 to form in our bodies3. To enhance our immune system4. To promote our blood circulation5. To produce more nutrient to our bodies6. Certain amount of UVB can replenish phosphorous and calcium in our bodies7. To prevent skeletal disorders effectively (e.g. Osteoporosis and Osteomalacia, etc)

Unstable weather conditions often ruin your plan. Cloudy sky and pouring rain are always the enemies of sunbath; unless you have Cosmedico Sun Tanning Lamp. No matter how the weather condition changes, an indoor tanning bed in salon ensures that the sunbath practices smoothly in anytime!

It’s easy to have sunburn after sunbathing! The problem of sunburn can be erased by having Cosmedico Sun Tanning Lamp, as the individual components of the spectrum can be precisely adjusted to the needs of the users. It can ensure the intensity of sun light is suitable for the users and skin is not overexposed.

I cannot achieve my expected skin color but have my skin reddened!

In fact, it takes longer for tanning than that required for skin reddening. But users of our lamps can have a regular sunbathing which can:

1. reduces the preliminary stages of skin reddening quickly;

2. let the tan constantly build itself up through repeated exposure;

As a result, users can have their desirable tanned skin without burning!

It’s GREEN! Some of the Cosmedico Sun Tanning Lamps have passed an Environmental Protection Agency Test (Effective since 6th, Jan, 2000) for hazardous waste determination: Toxic Characteristic Leaching Procedure (TCLP). The lampsapparently designated as passed the TCLP can be easily identifiable by the “signal” sign on the lamp etch. They are no longer considered hazardous waste and can be disposed of as normal refuse.

1.

2

3.

4.

77

Item no. Product UVAFlux UVB Flux Total Exp. Time (min.) Rated Hrs .

15500 CosmoLux RA plus100w FR71 Bi - pin

26.0 0.4 26.4 20 - 30. 500

15508 CosmoLux RA plus80w FR59 Bi - pin

21.0 0.3 21.3 20 - 30 500

15603 CosmoLux ESP/R100w FR73 RDC

28.0 1.0 29.0 9- 13 800

15602 CosmoLux ESP/R100w FR71 Bi - pin

28.0 1.0 29.0 9- 13 800

CosmoLux Reflector Sunlamps

CosmoLux VHR / VLR - The most effective and successful high-wattage reflector lamp everproduced

CosmoLux VHR / VLR Sunlamps

Item no Product UVAFlux UVB Flux Total Exp. Time (min.) Rated Hrs .

18810 CosmoLux VLR100w FR71 Bi - pin

28.0 0.8 28.8 13 - 17 800


22.0 0.6 22.6 13 - 17 800

15220 CosmoLux VLR120w 2.0M Bi - pin

34.0 1.0 35.0 13 - 17 800

15212 CosmoLux VLR - TT100w FR71 Bi - pin

28.0 0.9 28.9 12 - 16 800

16180 CosmoLux VHR160w FR71 Bi - pin

38.0 1.1 39.1 9- 15 800

16112 CosmoLux VHR - TT140w FR59 Bi - pin

31.0 1.0 32.0 7- 12 800

16220 CosmoLux VHR180w FR 2.0M Bi - pin

41.5 1.2 42.7 9- 15m 800

Item no. Product UVAFlux UVB Flux Total Exp. Time (min.) Rated Hrs.

10200 CosmoLux UVA plus100w F71 Bi - pin

28.0 0.4 28.4 24 - 30 500

10290 CosmoLux UVA plus80w F59 Bi - pin

23.0 0.3 23.4 24 - 30 500

12601 CosmoLux ESP100w F73 RDC

26.0 1.2 27.2 12 - 18 800

12600 CosmoLux ESP100w F71 Bi - pin

26.0 1.2 27.2 12 - 18 800

16161 CosmoLux VHO160w F71 Bi - pin

30.0 1.1 31.1 16 - 24 800

CosmoLux Full-Coat Sunlamps

Cosmedico COSMOLUX - Highest performance, proven technology, and overall best lamp value

Cosmedico Low Pressure Sun Lamps

78

CosmoLux 9K90Never-before-attained UVA (9000mw/c2) with spectacular lamp life!

CosmoLux Reflector 9K90 Sunlamps

Item no. Product UVAFlux UVB Flux Total Exp. Time (min.) Rated

Hrs.

16391 CosmoLux VHR 9K90160w FR71 Bi - pin

40.3 0.5 40.8 9- 15 + 1000

16223 CosmoLux VHR 9K90180w F R 2.0M Bi - pin

45.6 0.6 46.2 9- 15 + 1000

Goldarium

Goldarium Reflector Sunlamps


Hrs.

15340 Goldarium SR100w FR71 Bi - pin

23.0 0.8 23.8 15 - 20 1000

15280 Goldarium SR80w FR59 Bi - pin

19.0 0.6 19.6 15 - 20 1000


Hrs.

10990 CosmoLux GSP 9K90100w F71 Bi - pin

28.0 0.6 28.6 16 - 24 + 1500

CosmoLux Full-Coat 9K90 Sunlamps

Item no Product UVAFlux UVB Flux Total Exp. Time (min.) Rated

Hrs.


28.0 0.8 28.8 13 - 17 800


22.0 0.6 22.6 13 - 17 800

15220 CosmoLux VLR120w 2.0M Bi - pin

34.0 1.0 35.0 13 - 17 800

15212 CosmoLux VLR - TT100w FR71 Bi - pin

28.0 0.9 28.9 12 - 16 800

16180 CosmoLux VHR160w FR71 Bi - pin

38.0 1.1 39.1 9- 15 800

16112 CosmoLux VHR - TT140w FR59 Bi - pin

31.0 1.0 32.0 7- 12 800

16220 CosmoLux VHR180w FR 2.0M Bi - pin

41.5 1.2 42.7 9- 15m 800

Goldarium Full-Coat Sunlamps

79

CosmoStar Full-Coat Sunlamps


Hrs.

12503 CosmoStar Longlife100w F71 Bi - pin

30.0 0.9 30.9 20 - 26 1000


25.0 0.8 25.8 20 - 26 1000

Hi-Tan Full-Coat Sunlamps


Hrs.

16077 Hi- Tan by Cosmedico160w F73 RDC

33.8 1.2 35.0 7- 12 800


33.8 1.2 35.0 7- 12 800

CosmoStarUnmatched UV efficiency and long service life-tops among 100 w lamps.

Hi-Tan-The performance leader in 100w lamps, tailored for your mostdemanding customers.

CosmoSunThese value-priced 500 hour lamps are perfect for home beds and lightcommercial use.

CosmoSun Full-Coat Sunlamps


Hrs.

10158 CosmoSun 520100w F71 Bi - pin

26.0 1.1 27.1 16 - 24 500


20.8 0.9 21.7 16 - 24 500

10154 CosmoSun 515100w F73 RDC

26.0 1.2 27.2 12 - 18 500


26.0 1.2 27.2 12 - 18 500


20.8 1.0 21.8 12 - 18 500

80

CosmoStar Full-Coat Sunlamps


Hrs.


30.0 0.9 30.9 20 - 26 1000


25.0 0.8 25.8 20 - 26 1000

Hi-Tan Full-Coat Sunlamps


Hrs.


33.8 1.2 35.0 7- 12 800


33.8 1.2 35.0 7- 12 800

CosmoStarUnmatched UV efficiency and long service life-tops among 100 w lamps.

Hi-Tan-The performance leader in 100w lamps, tailored for your mostdemanding customers.

CosmoSunThese value-priced 500 hour lamps are perfect for home beds and lightcommercial use.

CosmoSun Full-Coat Sunlamps


Hrs.


26.0 1.1 27.1 16 - 24 500


20.8 0.9 21.7 16 - 24 500

10154 CosmoSun 515100w F73 RDC

26.0 1.2 27.2 12 - 18 500


26.0 1.2 27.2 12 - 18 500


20.8 1.0 21.8 12 - 18 500

Cosmedico High Pressure Sun Lamps

High pressure lamp technology represents a performance option for salons wanting to offer UVA-dominant tanning sessions.

Single Ended

Blade/Pin

R7s & Wire Leads

Item no. Product Watts Volts UVA (w)UVA

RatedHrs.

23049 CosmoTech L 400W R7s 400 220 75.0 80024101 CosmoTech 1200W 1200 220 240.0 80024004 Cosmedico E 400 L 400 220 80.0 80024008 Cosmedico E 500 Wire Lead 500 220 80.0 80021113 Cosmedico ME 650 LS 650 220 100.0 80024178 Cosmedico E 800 R7s 800 220 120.0 80024103 Cosmedico E 1000 L 1000 220 220.0 80021107 Cosmedico ME 1400 L 1400 220 275.0 80024203 Cosmedico E 2000 L 220v 2000 220 430.0 800

Item no. Product Watts Volts UVA (w)UVA

RatedHrs.

21111 Cosmedico E 400 SE 400 220 80.0 80024006 Cosmedico E 500 SE 500 220 80.0 80024171 Cosmedico N 1000 SE 1000 220 220.0 800

Item no. Product Watts Volts UVA (w) RatedHrs.

21082 Cosmedico ME 630 Pin 630 220 100.0 80021115 Cosmedico ME 1510 Blade 1510 220 310.0 800

81

Cosmedico Starters / Ignitors - Our UL-listed starters ensure trouble-free operation while extending the physical and electrical lamp life.

Cosmedico Sunlamp ignitors

We still have other models of our products which are not listed above. Welcome to contact us if you are interested in our products.

Ballasts, Starters & Ignitors

CosmoPower (Ballast) - Equipment makers worldwide choose us for maximumUV output and absolute best performance.

CosmoPower Full Performance

Item no. Product Watts Volts Freq. mF

74039 CosmoPower S 30w UL 30 220 60 4.074078 CosmoPower S 80w 80 220 60 8.074135 CosmoPower S 100w UL 100 220 60 9.074222 CosmoPower S 225w 2.0M UL 225 220 60 0.074415 CosmoPower S 1000w HP 1000 220 60 75.0

CosmoPower Compact / Economy

Item no. Product Watts Volts Freq. mF

74158 CosmoPower S 100w (short plate) 100 220 60 9.074237 CosmoPower S 140w slim 140 220 60 0.074236 CosmoPower S 160w 160 220 60 0.0

Low Pressure Glo-Bottle Starters

Item no. Product Watts Volts Life (min) UL

71502 Cosmedico FS11 4-22 110 6000 UL71111 Cosmedico FS11 4-80 220 6000 UL71160 Cosmedico Cos160 80-160 220 6000 UL71200* Cosmedico Cos200* 160-200 220 6000 --

Low Pressure Electronic Starters

Item no. Product Watts Volts Life (yrs) UL

71204 CosmoStart/E 15-225 200 10 yrs UL71205 CosmoStart/E-EPH** 160 200 10 yrs UL

High Pressure Electronic Ignitors

Item no. Product Volts Freq. P+ MaxA. UL

71805 CosmoPower MZN Z400 ignitor 220 1.2 50 5.0 UL71813 CosmoPower Z1000 ignitor 240 1.2 100 12.0 --71826 CosmoPower Z2000 ignitor 400 1.2 100 12.0 --

** For use with 1 60W lamp/140W ballast.

82

Mosquito / Insect Killer Lamps83

Mosquito / Insect Killer Lamps

Fashionable designEasy for cleaning and rust-proofDifferent sizes and powers suit for different occasion CE Approved Different materials available like Aluminium Alloy, Metal & ABS Plastic

Suitable location:Department stores, Hotels, Restaurants, Kitchens, Schools, etc.

Model FS-IK-001

Power 6W x 2, 8W x 2, 10W x 1, 10W x 2, 15W x 1, 15W x 2, 22W x 1, 20W x 2

Material Aluminium alloy

Model FS-IK-002

Power 10W x 2, 15W x 2, 20W x 2

Material Metal

Model FS-IK-003

Power 10W x 2, 20W x 2

Material ABS Plastic

84

Gadget

85

GadgetsLit your life with our gadgets! We provide a wide variety of lighting gadgets including LED flashing rods, LED torches, LED table lamps and clip lamps and LED head band. With different functions and models, our lighting gadgets can definitely bring delights and convenience to your daily life.

LED Flashing RodLED flashing rod is an ecological-friendly gadget. It is widely used for the concerts, parties, gifts and advertising souvenirs. We provide custom-made flashing rod service. You can choose your favorite flashing patterns, colors and styles to produce your own unique LED flashing rod. Logos or lines can be printed on the rod depending on your request. Three different styles of ready-made flashing rod are provided, including Lotus Shaped Lamp, Hello Kitty and Cinnamoroll.

Feel free to send us your design!Specification:Size: 1.7 cm (diameter) X 19 cm (length)

Weight: 45g (including batteries)

Colors: Red, Green, Blue, Yellow,Orange, Dual, Rainbow

Flashing Pattern: Straight, Spiral, Flashing, Color changing

LED TorchOur LED torch is convenient to carry around. Installed with super bright LED lamps, it is suitable for emergency lighting in both indoor and outdoor. Different weight and luminous flux are available to suit your needs.

FS-Torch-003

Model Material

Aluminum

Finishing Bulb Type LuminousFlux

ElectricalCurrent (mA)

60-65lumen

30 - 35 /60 - 65lumen

7000 -9000 mcd

500

380 / 800

50

Dimension(mm)

35 x 35 x 130

34 x 34 x 113

35 x 15 x 15

FS-Torch-006-1

FS-Torch-008

Aluminum6061T6

Aluminum6061T6

Weight(g)

105

87

18.6

Military gradeanodizing

Anodizing,with hardnessHRC 19-25°

Anodizing,with hardnessHRC 19-25°

3W LED,lasting 100,000hrs usage

1W / 3W LED,lasting 100,000hrs usage

ff5 LED,lasting 100,000hrs usage

Battery Type

2 pcs CR123Alithiumbatteries

3 pcs AAAalkalinebatteries

3 pcs “AG3”button cellbatteries

BurnTime (hrs)

3.5(hign beam)

3 or 2(hign beam)

1(hign beam)

Remarks

Water Resistant :Shower proof

Body Color:Black;Water Resistant :Shower proof

Body Color:Titanium, Black,Red, Green, etc.

86

!

FS-TORCH-003

FS-TORCH-006-1

FS-TORCH-008-1

FS-TORCH-010FS-TORCH-011

Model Bulb Type Adaptor Lens Size Beam Features

Lamp evenly illuminates readingarea

Adjustable arm, fixture provideglare free illumination

Lamp evenly illuminates reading area, fixture include clip for easy attachment

Adjustable arm, fixture provideglare free illumination

Lamp evenly illuminates readingarea

PR-FL-008

PR-FL-009

PR-FL-010

PR-FL-015

PR-FL-017

6V330mA

12V1200mA

6V330mA

6V330mA

12V1200mA

Polycarbonatelens

Polycarbonatelens

Polycarbonatelens

Polycarbonatelens

Polycarbonatelens

Flawlesswhitebeam

Flawlesswhitebeam

Flawlesswhitebeam

Flawlesswhitebeam

Flawlesswhitebeam

1W Luxeon LED,lasting up to100,000 hrs





150(W) x150(D) x400(H)mm

150(W) x150(D) x400(H)mm

60(W) x100(D) x400(H)mm

270(W) x130(D) x500(H)mm

150(W) x150(D) x400(H)mm

87

LED Head BandIn festivals and parties, LED head band can surely bring you much fun! Our LED headband is suitable for different scenes such as concerts and parties. As same as LED flashing rod, we provide custom-made LED head bands service to you. You can choose your favorite flashing patterns, colors and styles to produces your own unique LED head band. Feel free to send us your design!

Specifications:Colors: red, green, blue, yellow, orange, dual, rainbowFlashing Pattern: flashing, steady, color changing

88

LED Head BandIn festivals and parties, LED head band can surely bring you much fun! Our LED headband is suitable for different scenes such as concerts and parties. As same as LED flashing rod, we provide custom-made LED head bands service to you. You can choose your favorite flashing patterns, colors and styles to produces your own unique LED head band. Feel free to send us your design!

Specifications:Colors: red, green, blue, yellow, orange, dual, rainbowFlashing Pattern: flashing, steady, color changing

Christmas Trees& OrnamentsWe are the professionals for making christmas trees in huge size, such as 10m, 15m, 20m and 25m height. We have been handling many projects in different countries, including Japan, Russia and China, etc. Up until now, the tallest tree, which we have made and installed in Japan, is 20m height.

89

Fu Sun Christmas TreesSizes of Christmas trees: 4ft, 5ft, 6ftWith other height of Christmas tree ranges from 30cm to 10m, 15m, 20mWith other Christmas ornaments, artificial plants, wreaths, garlands, etc

Mitsubishi Office Project in Japan

Model : FS007

Model : FS010

Model : FS014 Model : FS017 Model : FS018

Model : FS003 Model : FS006Model : FS001

Model : FS009 Model : FS011

Model : FS019

Model : FS015



Model : FS020

Model : FS002

Model : FS013

Model : FS021

Model : FS016

Hong Kong Ocean Park ProjectChiba Funabashi Lalaport

shopping mall in Japan

Eco-Non-woven bags

More products and services are available,please contact us for further information.

Product FeaturesWaterproof, Anti-static, Light, Durable, Recyclable and etc.

ApplicationShopping bags, Promotion products bags, Gift bags, Wine bags, Shoes bags……

MaterialNon-woven fabric, Polyeaster, Nylon, Cotton, T/C cotton, Flannelette, Canvas

Printing methodSilk screen, 4C off set, Heat transfer

We provided other non-woven proucts as well:

Slippers Shower Cap Facial Mask Gauze Mask

90

Fu Sun Christmas TreesSizes of Christmas trees: 4ft, 5ft, 6ftWith other height of Christmas tree ranges from 30cm to 10m, 15m, 20mWith other Christmas ornaments, artificial plants, wreaths, garlands, etc

Mitsubishi Office Project in Japan

Model : FS007

Model : FS010

Model : FS014 Model : FS017 Model : FS018

Model : FS003 Model : FS006Model : FS001


Model : FS019

Model : FS015



Model : FS020

Model : FS002

Model : FS013

Model : FS021

Model : FS016

Hong Kong Ocean Park ProjectChiba Funabashi Lalaport

shopping mall in Japan

Eco-Non-woven bags

More products and services are available,please contact us for further information.

Product FeaturesWaterproof, Anti-static, Light, Durable, Recyclable and etc.

ApplicationShopping bags, Promotion products bags, Gift bags, Wine bags, Shoes bags……

MaterialNon-woven fabric, Polyeaster, Nylon, Cotton, T/C cotton, Flannelette, Canvas

Printing methodSilk screen, 4C off set, Heat transfer

We provided other non-woven proucts as well:

Slippers Shower Cap Facial Mask Gauze Mask

91

Ribbon & LanyardYour BEST choice for promotion

Lanyards for decoration, mobile phone, eyewear areavailable for you.

Other products:Rope accessories, imitated leather belts, shoestrings,keychains, man-made flowers, imitated jewelry, etc.

If you are interested with any related products, don’t hesitate to contact us.

Welcome any designs and orders

Provide the best quality servicesand products

Printing Logo and Text forpromotional purpose

A package of waist belt and keychain

Other products also are excellent choices fordecoration and daily use.

Different combination can be offered based on your special requirement.

Keychains

92

Ribbon & LanyardYour BEST choice for promotion

Lanyards for decoration, mobile phone, eyewear areavailable for you.

Other products:Rope accessories, imitated leather belts, shoestrings,keychains, man-made flowers, imitated jewelry, etc.

If you are interested with any related products, don’t hesitate to contact us.

Welcome any designs and orders

Provide the best quality servicesand products

Printing Logo and Text forpromotional purpose

A package of waist belt and keychain

Other products also are excellent choices fordecoration and daily use.

Different combination can be offered based on your special requirement.

Keychains

SculptureSculpture

Garden Sculpture

Sculptures, three-dimensional man-made objects, are regarded as a form of art, adding another dimension to the gardens, parks or museums etc. In comparison with other forms of art, sculptures can emulate either realistic or the oretical images. Apart from this, sculptures can also be used as a form of expression, witnessing the ancient past. In other words, the art of sculpting helps people understanding history and evolution of art through the ages. Although this kind of art may change in the future, yet it will be considered as a major influence in the art world.

Over years of development, we, Fu Sun Lighting Limited, have built a trustworthy relationship with our clients by providing the best quality of services to our customers. In order to satisfy our honorable customers’ demands, we provide you with various types of sculptures, including horses, portraits, memorial and symbolic art etc.

On the basis of our customer-centered approach, together with our sincerity, we believed Fu Sun Lighting Limited is your best business partner. We are very pleased to serve you.

93

Adorable Animal RadioAn Electronic Device which Combines Internal and External Beauty

External Beauty: * Colourful* Attractive to Children* Resistance to steam and splashes, an Essential Bathroom Music Device* Able to hang on different surfaces

Internal Beauty:* Receive AM & FM channel clearly

* The operation is simple and easy with only 3 AA batteries.

* Different styles are available

* Your Logo & Slogan are welcome

* BEST & Innovative Promotional Item

The above photos are gift items for TOSHIBA brand only,not for sale.

94

HDTV-Ready widescreen LCD TV

The finest and the most detailed images provided

at favourable price

A 3-dimentional and smooth viewing of imagesRealistic, nice and wonderful color productionSize of screen : 20”/32”/37”/42”

Characteristics of services provided by us Professional installation service provided based on customers’ requests. - with simple installation. - special installation provided at favourable price. (including inspection and provision of professional opinion)

LCD screen operates with computer system to show advertising information.

Industrial-design

wall-mounted

accessories

Free installation consultation

service

2 to 3 year maintenance

service

A sharp, smooth and vivid viewing of moving imagesFine and realistic images shown on screenSize of screen : 26”/32”/37”/42”

Fine images shown on flat TV screenImprove your vision experienceSize of screen : 26”/32”/37”/42”

High ContrastWide

Viewing AngleHigh Brightness

16 : 9Wide screen

High Resolution

Our products can be widely used in:Hotel lobbies Rooms in hotelsClassrooms School halls Gymnasiums PlaygroundsExhibition halls Assembly hallsClinics Pharmacies Hospital pathways StoresShopping malls BanksRestaurantsAirlines’ counters

95

Warm BagFeatures:Keep you warm with Instant HeatEveryday air-activated hand, toe, foot and body warmers to keep you warm whether you're enjoying outdoor activities, at work, or relaxing indoors.

Easy to use, No need to refill and rechargeNatural materials, Environmental friendly“Sticker type” : stick on clothes without changing its appearanceOEM available

Made in Japan

10 x 7cm 9.6 x 7cm 9.6 x 7cm 10 x 7cm

13.3 x 10cm

13. x 9.5cm

13 x 9.5cm

13.3. x 10cm

13.3 x 10cm 13.3 x 10cm

Display Stand Series Packing Series

Other Series

Other series of display stands are available. For any enquiry, feel free to contact us by phone, fax or email.

Display Stands,Craftworks & Accessories Make use of the advertising tool!!!

Wide use of application : mobile phone, eyewear, cosmetic, book, watch, jewellery and etc.

Materials like acrylic, wood, stainless steel, etc are available.

Materials mentioned above can be used together.

Good quality at reasonable price.

96

Display Stand Series Packing Series

Other Series

Other series of display stands are available. For any enquiry, feel free to contact us by phone, fax or email.

Display Stands,Craftworks & Accessories Make use of the advertising tool!!!

Wide use of application : mobile phone, eyewear, cosmetic, book, watch, jewellery and etc.

Materials like acrylic, wood, stainless steel, etc are available.

Materials mentioned above can be used together.

Good quality at reasonable price.

97

Seasoning your life with little gadgets!

Our company is a professional manufacturerof various USB applications, which can be used for home decoration or as a promotional gift. Our product range covers:

Feaures:- innovative- practical- not occupy much space- high quality with reasonable price

USB Ash Tray USB Cup Warmer USB Hub USB Snowman Ornament

USB Mouse Pad with Hub　　USB Charger 　　　　 USB Fan 　　　 USB Lamp with Fan

USB Aquarium 　　USB Pencil Sharpener 　 USB Christmas Tree 　　　

USB Music Santa Claus

98

99

TOSHIBA LAMPSFIXTUREMAXILUMLED SIGNBOARD

DECORATIVE LIGHTING

SIGNAGEEMERGENCY LAMP

COSMEDICO

Copyright © Fu Sun Lighting LimitedAll rights reserved, no part of this design can be reproduced without the permission of the copyright holder

Documents

toshiba lamps fixture maxilum led signboard decorative lighting signage emergency lamp