Toshiba AV833 32 English Specific[1]

7/27/2019 Toshiba AV833 32 English Specific[1]

1/64

32AV83*B

32/40LV83*B

26/32EL83*B

32/42HL83*B

DIGITAL

Series

Register your TV online at:www.toshiba.co.uk/registration


2/64

2

English

ContentsSafety Precautions ....................5

Air Circulation ...................................... 5

Heat Damage ...................................... 5

Mains Supply ....................................... 5Do ........................................................ 5

Do not .................................................. 5

Installation and importantinformation .................................6

Where to install.................................... 6

When using a Wall Bracket ................. 6

The Remote Control ..................12

Inserting batteries andeffective range of the remote ............... 12

Connecting ExternalEquipment ..................................13

HDMI-LINK Connections ...........15

Connecting an HDMI or DVIdevice to the HDMI input ...........16

To connect an HDMI device ................ 16

To connect a DVI device...................... 18

Connecting a Computer ............20

To connect a PC to the HDMIterminal................................................ 20

Acceptable Video signals through HDMIterminals .............................................. 22

Acceptable PC signals through HDMIterminals .............................................. 22

Digital On-Screen Informationand Programme Guide ..............23

Information .......................................... 23On-Screen Information Icons .............. 23

Guide ................................................... 23

Frequently Asked Questions ....24

Using the Controls ....................26

Switching On ....................................... 27Using the Remote Control ................... 27

Using the Side-Key Controls ............... 27

Tuning the Television ................28

Quick Setup ......................................... 28

Setting the Channels .................30

Auto Tuning ......................................... 30Manual Tuning ..................................... 31

Automatic Power Down ....................... 33

Reset TV ............................................. 33

DTV Settings ..............................34

Channels ............................................. 34

Channel Options.................................. 35

Subtitle and Audio ............................... 36Password............................................. 36

Parental ............................................... 36

Common Interface ............................... 36

General Controls .......................37

Selecting Channels ............................. 37

Stereo and BilingualTransmissions ..................................... 37Quick Access Menu ............................. 37

Subtitles............................................... 37

Picture Still .......................................... 37

Input Selection..................................... 37

Sound Controls ..........................38

Volume Controls and Mute Sound....... 38

Dual ..................................................... 38

Bass, Treble and Balance ................... 38

Stable Sound ....................................... 38


3/64

3

E n

g l i s h

Surround Sound .................................. 38

Bass Boost .......................................... 38

SPDIF Type ......................................... 38

Audio Description ................................ 39

Widescreen viewing ..................40 Available Picture Size and PositionControl ................................................. 41

Picture Controls .........................42

Picture Position ................................... 42

Picture Mode ....................................... 42

Picture Preferences ............................. 42

Black/White Level ................................ 43Cinema Mode ...................................... 43

Colour Temperature ............................. 43

Static Gamma...................................... 43

Reset ................................................... 43

Active Backlight ................................... 43

3D Colour Management ...................... 43

Base Colour Adjustment ...................... 44

Digital Noise Reduction ....................... 44

MPEG NR Noise Reduction ............. 44

Enjoy Photos through USBPort .............................................45

View Photo Files .................................. 45

Using Slide Show ................................ 46

Repeat Settings for Slideshow ............ 46

Set Interval Time ................................. 46

Using the Play List............................... 46

Photo Info ............................................ 46

Enjoy Music through USBPort .............................................47

Play Music Files .................................. 47

Repeat Settings ................................... 48Using the Play List............................... 48

Music Info ............................................ 48

Enjoy Videos through USBPort .............................................49

Play Video Files ................................... 50

Repeat Settings ................................... 51

Set ...................................................... 51Slow Forward ...................................... 51

Step Forward ....................................... 51

Using the Play List............................... 51

Video Info ............................................ 51

Goto Time ............................................ 51

HDMI-LINK Controls ..................52

Equipment Control............................... 52Input Source Selection ........................ 52

HDMI-LINK Menus .....................53

One Touch Play ................................... 53

System Standby .................................. 53

System Audio Control .......................... 53

Enable HDMI-LINK .............................. 53

Auto Power On .................................... 53 Auto Standby ....................................... 54 Ampli er Control.................................. 54Speaker Preference ............................ 54

Preference Controls ..................55

On Timer .............................................. 55

Sleep Timer ......................................... 55

EPG ..................................................... 56

Panel Lock........................................... 57

Auto Format (Widescreen) .................. 57

4:3 Stretch ........................................... 57

Blue Screen ......................................... 57

Side Panel ........................................... 57

System Information ............................. 57

System Upgrade.................................. 58Text Services and TextInformation .................................59


4/64

4

English

Setting the Modes ............................... 59

Navigating Pages using Auto .............. 59

Navigating Pages using LIST .............. 59

Control Buttons.................................... 59

PC Settings ................................60Horizontal and Vertical Position........... 60

Horizontal Width .................................. 60

Clock Phase ........................................ 60

Reset ................................................... 60

Input Selection and AVConnections ...............................61

HDMI1 Audio ....................................... 61Lip Sync Mode .................................... 61

Input Signal Selection.......................... 61

Specifcations andAccessories ...............................62


5/64


6/64

6

English

Installation and important informationWhere to install

Locate the television away from direct sunlight andstrong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent

direct sunlight falling on the screen.Place the TV set on a stable, level surface thatcan support the weight of the TV. As an additionalsafety measure you secure the TV to the levelsurface or a wall, as shown in the illustration, usingsturdy strap.The LCD display panels are manufactured usingan extremely high level of precision technology,however sometimes some parts of the screen maybe missing picture elements or have luminousspots. This is not a sign of a malfunction.Make sure the television is located in a positionwhere it cannot be pushed or hit by objects, aspressure will break or damage the screen. Also,please be certain that small items cannot be in-serted into slots or openings in the case.Cleaning the screen and cabinet...Turn off the power, and clean the screen and cabinetwith a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screenor cabinet as this may cause damage.

Sturdy tie (as short as possible)

Stand clip

Fixing strap

Fixing strap

Sturdy tie (as short as possible)

Stand clip

Fixing strap

Fixing strap

Stand style is dependent on model

When using a Wall BracketPlease use a wall bracket appropriate for the size and weight of the LCD TV. Two people are required for installation. Never use the four screws attached to the TV. To install a wall-mount from another manufacturer, use theSPACERS (supplied).1. Unplug and remove any cables and/or other

component connectors from the rear of the TV.2. Carefully lay the front of the unit face down on a at,

cushioned surface such as a quilt or blanket.3. Follow the instructions provided with your wall

bracket. Before proceeding, make sure the ap-propriate bracket(s) are attached to the wall andthe back of the TV as described in the instruc-tions provided with the wall bracket.

4. Make sure to place the spacers supplied be-tween the bracket and the back of the TV.

5. Always use the screws supplied or recom-mended by the wall mount manufacturer.

*Screw Type for Wall Bracket: 26LED, 32CCFL, 32LED, 40CCFL: M6/10mm/20KG 42LED: M8/12mm/20KG

Spacer (supplied)

Wall bracketScrew

Remove four screws.(Do not reuse these screws for attaching a wall bracket.)

Place four spacers (supplied).

TV back panel

Spacer (supplied)

Wall bracketScrew

Remove four screws.

(Do not reuse these screws for attaching a wall bracket.)

Place four spacers (supplied).

TV back panel


7/64

7

E n

g l i s h

Removing the Pedestal Stand:1. Carefully lay the front of the unit face down on a

at, cushioned surface such as a quilt or a blan -ket. Leave the stand protruding over the edge of the surface.

NOTE: Extreme care should always be used whenremoving the pedestal stand to avoid dam-age to the LCD panel.

2. Remove the screws.

3. Once you have removed all ve screwsholding the pedestal stand in place, removethe pedestal stand from the TV by sliding thepedestal stand away from the TV.

Please take noteEXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:i) re;ii) earthquake;iii) accidental damage;iv) intentional misuse of the product;v) use of the product in improper conditions;vi) loss and/or damage caused to the product while in the possession of a third party;

vii) any damage or loss caused as a result of the owners failure and/or neglect to follow the in-structions set out in the owners manual;

viii) any loss or damage caused directly as a result of misuse or malfunction of the product whenused simultaneously with associated equipment;Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following, loss of pro t, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product. If stationary images generated by 4:3 broadcasts, text services, channel identi cation logos, computer

displays, video games, on-screen menus, etc. are left on the television-screen for any length of time theycould become conspicuous, it is always advisable to reduce both the brightness and contrast settings.

Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of theimage at the 4:3 outlines, this is not a defect of the LCD TV and is not covered under the manufac-turers warranty. Regular use of other size modes (e.g.: Superlive) will prevent permanent retention.

NOTE: Interactive video games that involve shooting a gun type of joystick at an on-screen targetmay not work with this TV.

SYMBOL SYMBOL DEFINITIONDANGEROUS VOLTAGE: The lightening ash with arrowhead symbol within anequilateral triangle is intended to alert the user to the presence of un-insulatedDANGEROUS VOLTAGE within the products enclosure that may be of suf cientmagnitude to constitute a risk of electric shock to persons.

INSTRUCTIONS: The exclamation point within on equilateral triangle to alert theuser to the presence of important operating and maintenance (servicing) instructionin the literature accompanying the appliance.

WARNING: To prevent the spread of re, keep candles or other open ames awayfrom this product at all times.


8/64

8

English

Digital Switchover

How to re-tune:

As new services are broadcast it will be neces-sary to re-tune the television in order to viewthem. Auto tuning will completely retune thetelevision and can be used to update the chan-nel list.

Press MENU button on the remotecontrol unit.Select Auto tuning option.

A screen will appear warning that previ-ous digital programmes and settings willbe deleted.

You must allow the television to com-plete the search......

When the search is complete the Auto tuning screen will display the total number of servicefound.

Note:Further detailed instructions on Auto tuning can be found in the TV owners manual.

If you are missing channels, it may be thatthey are not available in your area, or that your aerial needs upgrading.

If you have any further questions, please

contact your equipment supplier or call DigitalUK on 08456 50 50 50 or visit www.digitaluk.co.uk

Television in the UK is going digital, bringingus all more choice and new services. Startingin late 2007 and ending in 2012, televisionservices in the UK will go completely digital, TV

region by TV region.Please see above to nd out when your areaswitches to digital.

Digital UK is the independent, non-pro torganisation leading the process of digitalTV switchover in the UK. Digital UK providesimpartial information on what people need todo to prepare for the move to digital, and whenthey need to do it.

How the switchover affects your TVequipment:

Your new TV has a digital tuner built in, whichmeans it is ready to receive the Freeview sig-nal by simply plugging it into your aerial socket(check if you can get digital TV through your aerial now, or whether youll have to wait untilswitchover, at www.digitaluk.co.uk ).

When the TV switchover happens in your area,there are at least two occasions when you willneed to re-tune your TV in order to continue re-ceiving your existing TV channels, and also topick up new ones, Digital UK, the body leadingthe digital TV switchover, will advise you whenyou need to re-tune during the switchover.If you choose to connect your TV to satelliteor cable with a digital box then it will not beaffected by switchover, and you wont need tore-tune.

E n

gl i s h

E n

gl i s h

Keep this importantinformation abouthow to re-tune yourTV during theTV switchover

E n

gl i s h

E n

gl i s h

When does switchover happen?*Copeland switches on October 17, 2007

The exact date youswitch depends on thetransmitter you areserved by. To checkwhen you switch,go to Digital UKspostcode checker onwww.digitaluk.co.ukCheck your ITV newsservice or look at Teletextpage 106 to see what TVregion youre in.

Keep this importantinformation abouthow to re-tune yourTV during the digitalTV switchover


9/64

9

E n

g l i s h Re-tuning: TOSHIBA 4 Steps

TOSHIBA Digital TV

* This process may affect any saved information stored on your product, including your favourites list.

Please consult your instruction manual or contact the manufacturer using the details above.

TOSHIBA Customer Helpline: 0844 856 0730 TOSHIBA Online Support:www.toshiba.co.uk/tv-dvd-support

P IC TU RE S OU ND SETUP APPLICATIONS PREFERENCES

Press MENU and press or to select SETUP .

1 )

1

2 22 2

LanguageCountryTuner Mode

Auto tuning ATV Manual TuningDTV Manual TuningDTV Settings

AV connectionPicture PositionQuick Setup

EnglishUK

Antenna

Enter OK BackRETURN

1/2SET UP

OKOK

OK

OK

OK

Press or to selectAuto tuning , and press

to enter the sub-menu.

2 )

1

1

2

Auto tuning

Tuning Mode

Start Scan

ATV and DTV

OK

BackRETURN

Previous settings will be lost !Press EXIT for no change.

Enter OK

Press or to selectTuning Mode and press or to select ATV,DTV or ATV and DTV .

3 )

1

1

2 2

Auto tuning

ATVDTV

StopEXIT

Progress2 %0 %

Channel: C4 Station:

Found00

Press or to selectStart Scan and pressto start Auto tuning .

4 )

1

1

2

(Steps 1-4) Freeview products

Make sure your TV is on and press 80for the BBC News channel

This guide can be used to help you re-tune the following product with the remote control below:


10/64

10

English

Manual re-tuning

If your Freeview TV or box picks up a di erent regional service to yourpreferred service (e.g. BBC England instead of BBC Scotland, or ITV Centralinstead of ITV Anglia), you can use this manual re-tune guide.

800 or above, this guide will help you put them in your preferred position.

retailer or installer. This is a guide only, Freeview models operate slightlydi erently. Some early models do not o er a manual re-tune facility check your instruction book.

Go to the Postcode Checker at digitaluk.co.uk

Enter your postcode on the right hand side of the web page.Remember to include your house number or name.If you do not have internet access, contact the Digital UK helpline on 08456 50 50 50 * and ask for manual re-tuneguide support.

1

Click on the How do I re-tune? pink banner.Scroll down to the manual re-tune table whereyou will see the relevant RF Channel numbersfor the digital services that can be receivedat your home. **

3

Once you have entered your address details, the next page gives you an indication of which TV services you should receive, based on your most likely transmitter. You maybe able to receive television services from more than one transmitter and you cancheck alternatives, where available.

On the results page click on the pink button to seeyour full reception forecast and channel informationfor switchover.

2

Write down the RF Channel numbersfor your transmitter using the Groupboxes here:

4 Group 1Group 2Group 3

Group 4Group 5

Group 6

*Calls are free for BT customers wi thin inclusive calling plans. Call charges from other providers may vary. The standard business hours for Digital UKs contact centre are 9am to 7pmMonday to Friday and 10am to 4pm on a Saturday. Opening hours will be extended during switchover in each area. Digital UK, PO Box 26833, Kirkcaldy,KY2 9AG .

**Please note that the Freeview channel line-up is subject to change.

Your guide to

If you are comfortable with technical information and your basic re-tune hasnt worked,you can use this manual re-tune guide.

Please note:

Every timeyou re-tune,you will needto go throughthis process.


11/64

11

E n

g l i s h




EnglishUK

Antenna

Enter OK BackRETURN

1/2SET UP

OK

OK

OK

OK

OK

DTV Manual Tuning

OK

RF ChannelStart Scan

5

Signal StrengthQuality

Weak Average Strong

Poor

BackRETURNEditInput09


12/64


13/64

13

E n

g l i s h

Connecting External EquipmentBefore connecting any external equipment, turn off all main power switches. If there is no switchremove the mains plug from the wall socket.Connect the power cord into the AC-IN socket found at the back of the TV.

HDMI 1 INPUTSOCKET

RGB/ PC

ACIN

HDMI 2 INPUTSOCKET

For 26/32EL83*B | 32/42HL83*B

HDMI 1 INPUTSOCKET

RGB/ PC

HDMI 2 INPUTSOCKET

ACIN

For 32AV83*B | 32/40LV83*B


14/64

14

English

Aerial cables: - - - - - - - - - - - - - - - - - - -Connect the aerial to the ANT socket on the rear of the television.If you use a decoder and/or media recorder, connect through the decoder and/or media recorder to thetelevision.

SCART cables: - - - -- - - - - - - - - - - - - - -

Connect the video recorder IN/OUT or decoder TV socket to the television. Connect the media player SAT socket to the decoder MEDIA REC . socket.

Before running Auto Tuning put your decoder and media recorder to Standby .

HDMI (High-De nition Multimedia Interface) is for use with a DVD, decoder or electrical equipmentwith digital audio and video output. It is designed for best performance with 1080i high-de nition videosignals but will also accept and display 480i, 480p, 576i, 576p, 720p and 1080p. HDMI1 also supportVGA, SVGA, XGA, WXGA and SXGA.

NOTE: Although this television is able to connect to HDMI equipment it is possible that some equip-ment may not operate correctly.

A wide variety of external equipment can be connected to the back of the television, thereforethe relevant owners manuals for all additional equipment must be referred to.

If the television automatically switches over to monitor external equipment, return to normal televisionby pressing the desired channel button. To recall external equipment, press to select.

HDMI, the HDMI Logo, and High-De nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in theUnited States and other countries.

NOTE: Because there is possibility to happen unexpected phenomenon, power cord should not bedisconnected frequently.


15/64

15

E n

g l i s h

HDMI-LINK ConnectionsThe basic functions of connected audio/video equipment can be controlled using the televisionsremote control if a HDMI-LINK compatible device is connected.

The back of your television

AV amplifier

HDMI out

Playback equipment

HDMI outHDMI in

Playback equipmentHDMI out

For 26/32EL83*B | 32/42HL83*B

The back of your television

AV amplifier

HDMI out

Playback equipment

HDMI outHDMI in

Playback equipmentHDMI out

For 32AV83*B | 32/40LV83*B


16/64

16

English

Connecting an HDMI or DVI device to the HDMI inputThe HDMI input on your television receives digital audio and uncompressed digital video from anHDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme mate-rial in digital form from EIA/CEA-861-Dcompliant [1] consumer electronic devices (such as a set-topbox or DVD player with HDMI or DVI output). For acceptable video signal formats, see page 22.

NOTE: Some early HDMI equipment may not work properly with your latest HDMI TV, due to the

adoption of a new standard. Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.

To connect an HDMI deviceConnect an HDMI cable (type A connector) from the device to the HDMI terminal.For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo( ). If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates

greater than 50Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work

properly with this mode. HDMI cable transfers both video and audio. Separate analogue audio cables are not required(see illustration).

HDMIcableHDMI device

HDMI out(not supplied)

For 26/32EL83*B | 32/42HL83*B


17/64

17

E n

g l i s h

HDMIcableHDMI device

HDMI out(not supplied)

For 32AV83*B | 32/40LV83*B

To view the HDMI device video, press the button to select HDMI 1 or HDMI 2 mode.


18/64

18

English

To connect a DVI deviceConnect an HDMI-to-DVI adapter cable (HDMI type A connector) to the HDMI 1 terminal and audiocables to the PC/HDMI1 (AUDIO) socket (see illustration). The recommended HDMI-to-DVI adapter cable length is 6.6ft (2m). An HDMI-to-DVI adapter cable transfers video only. Separate analogue audio cables are required for audio receivers.

DVI device

HDMI-to-DVI adapter cable(not supplied)

Audio cable for HDMIto television connection(not supplied)

For 26/32EL83*B | 32/42HL83*B


19/64

19

E n

g l i s h

DVI device

HDMI-to-DVI adapter cable(not supplied)

Audio cable for HDMIto television connection(not supplied)

For 32AV83*B | 32/40LV83*B

To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow theseprocedures: When turning on your electronic components, turn on the television rst, and then the HDMI or

DVI device. When turning off your electronic components, turn off the HDMI or DVI device rst, and then the

television.

[1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection,which is being standardized for reception of high-de nition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the television.HDMI, the HDMI Logo, and High-De nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC inthe United States and other countries.


20/64

20

English

Connecting a Computer With either an RGB/PC or an HDMI connection, you can watch your computers display on the televi-sion and hear the sound from the televisions speakers.

To connect a PC to the HDMI terminalWhen connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI adapter cableand an analogue audio cable.If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). A separate ana-logue cable is not necessary.

the back of your television

HDMI-to-DVIadapter cable(not supplied)

2

Computer

Audio cable for PC to televisionconnection (not supplied)

For 26/32EL83*B | 32/42HL83*B


21/64

21

E n

g l i s h

the back of your television

HDMI-to-DVIadapter cable(not supplied)

2

Computer

Audio cable for PC to televisionconnection (not supplied)

For 32AV83*B | 32/40LV83*B

For acceptable PC and video signal formats, see page 22.NOTE:

The edges of the images may be hidden. If connecting a certain PC model with a unique PC signal, the PC signal may not be

detected correctly.


22/64

22

English

Acceptable Video signals through HDMI terminals

Resolution H. Frequency (KHz) V. Frequency (Hz)

480i 15.734 60.000

480p 31.500 60.000

576i 15.625 50.000

576p 31.250 50.000

720p 37.500 50.000

720p 45.000 60.000

1080i 28.125 50.000

1080i 33.750 60.000

1080p 27.000 24.000

1080p 28.125 25.0001080p 33.750 30.000

1080p 56.250 50.000

1080p 67.500 60.000

Acceptable PC signals through HDMI terminals

Resolution H (KHz) V(Hz) Pixel Clock(MHz) H-Polarity V-Polarity H-Total V-Total

640 x 480 31.369 59.940 25.175 Negative Negative 800 525



800 x 600 35.160 56.250 36.000 Positive Positive 1024 625






1280 x 768 47.776 59.870 79.500 Negative Positive 1664 798





23/64

23

E n

g l i s h

Digital On-Screen Information and Programme GuideWhen viewing in digital mode, the on-screen information and programme guide provide access toprogramme details for all available channels.

On-Screen Information Icons

Icons will appear on the Information screen giv-ing details about the programmes being broad-cast. Details of these icons are listed below:

Icon Description

Service info

Service type(TV, Radio, TEXT)

Skip

Audio info

Mono

Stereo

Dual mono

Multichannel

Dolby DigitalDolby Digital+

Audio/Subtitle info Hearing Impaired

Event info

HD, SD Video format(HD, SD)16:9, 4:3 Video Aspect

Teletext

Subtitle

(Single, Multi)

Multi-audio track

3 - 18 Parental rating

Encrypted

Timer infoRecording

Reminder

GuideSelect the on-screen guide by pressing

GUIDE . The guide screen will appear highlighting details of the channel andprogramme currently being viewed. Thismay take a few moments to appear.

Press or for information on other pro-grammes scheduled for the channel selected.

For details of other programmes cur-rently available, press and to scrollup and down the channel list.

NOTE: In order for the recording operation

to work properly, the media recorder must be set to the same time as the TV.Regarding the process for recording,please refer to the owners manual of the recording equipment.

Information

Press , and the information screenwill appear giving details of the channeland programme currently being viewed.

1 BBC Parliament

Westminster HallPrime Minister's Questions

Recorded coverage of questions in the House of Commons to PrimeMinister Gordon Brown from Wednesday 26 Novemder.

07:00 11:3011:30 12:00

News/Current.. 72 Minutes Left

10:18 Sun, 30 Nov

Press or to choose from Now or Next information guide.


24/64

24

English

Frequently Asked Questions

Q Why is there no sound or picture?

A Check that the television is on and thatall connections are made properly.Q There is a picture, but why is there littleor no colour?

AThe colour is factory set to Auto to auto-matically display the best colour system.When using an external source, if thereis little or no colour, improvements maysometimes be achieved.

To manually change the colour system:

With the external source playing, select

Manual setting in the SETUP menu.Using or to choose fromAuto ,NTSC 4.43 , NTSC 3.58 , SECAM or PAL .

Manual setting

EXT 1

Colour system: Auto

A

BackRETURNSelect Change SaveOK

Q Why doesnt the video/DVD being played show on-screen?

AMake sure the VCR or DVD player isconnected to the television, then selectthe correct input by pressing .

Q Why is there a good picture but nosound?

ACheck all cable connections and that

the volume has not been turned down or that the sound has not been muted.

Q What else can cause a poor picture?

A

Interference or a weak signal. Try adifferent television station. Manual netuning may help:Select the ATV/DTV Manual Tuning inthe SETUP menu.Highlight the station and press , thenpress or to select Manual fne tuning .

ATV Manual Tuning

Manual fine tuning

1 BG P C 69 0

BackRETURNSelect Change SaveOK

Using or to adjust to get the best pic-ture and sound. Press and then EXIT.

Q Why doesnt the remote control work?

A Check that the batteries arent dead or inserted incorrectly.

QWhy are there problems with text?

A

Good performance of text depends ona strong broadcast signal. If the text isunreadable or garbled, check the aerial,satellite or cable connection. Go to themain index page of the text service andlook for the User Guide. This will explainthe basic operation of text in some detail.

Q Why are the four coloured text numbersvisible but no text?

AText has been selected while viewing anexternal source. No text will appear on-screen or a box may appear stating noinformation is available. Select a broad-casting channel and press to access.


25/64


26/64

26

English

Using the ControlsWhile all the necessary adjustments and controls for the television are made using the remote control,the buttons on the television may be used for some functions.

HDMI 2 INPUTSOCKET

Common Interface

USB

RED LED StandbyGREEN LED Power on

GREEN LED On Timer

For 26/32EL83*B | 32/42HL83*B

HDMI 2 INPUTSOCKET

Common Interface

USB

RED LED StandbyGREEN LED Power on

GREEN LED On Timer

For 32AV83*B | 32/40LV83*B


27/64

27

E n

g l i s h

Switching On

If the RED LED is unlit check that the plug is connected to the power supply. If the picture does notappear press on the remote control, it may take a few moments.To put the television into Standby press on the remote control. To view the television pressagain. The picture may take a few seconds to appear.

Using the Remote Control

To set up the television you will now need to use the on screen menus. Press MENU on the remotecontrol to see the menus.The on-screen menu appears as a list of ve topics. As each symbol is selected by pressing or on the navigation ring on the remote control, its respective options will appear right side.To use the options, press to enter the sub menu. Then press or on the navigation ring tomove up and down through them and use or to select the required choice. Follow the on-screeninstructions. The functions of each menu are described in detail throughout the manual.

Using the Side-Key Controls

To change the volume, press .To alter the channel, press P .Press MENU and or , or to control the sound and picture options.Press MENU to nish.To select an external input, press and then use or to move through the list until the appro-priate input source is selected.

Please always refer to the owners manual of the equipment to be connected for full details.Please note: Inserting the headphone plug will mute the sound from all speakers.


28/64

28

English

Before switching on the television put your decoder and media recorder to Standby if they are connected.To set up the television use the buttons on the remote control as detailed on page 12.

Tuning the Television

Quick Setup

For rst time use, plug in the televisionand press the button.The Quick Setup screen will appear.

Quick Setup

LanguageCountryDigital Subtitle LanguageDigital Subtitle Language 2nd

Audio Language Audio Language 2nd

EnglishGermanyEnglishEnglishEnglishEnglish

BackRETURNSelect Tuner ModeOK

Note: The Quick Setup menu can alsobe accessed in the SETUP menu.

Press or to select Language and then press or to select your language (English, Franais, Deutsch,Espaol, Italiano, Portugus, Neder-lands, Svenska, Dansk, Norsk, Suomi,Polski, Slovenina, Magyar, Slovensky,

esk, Pycc, Romn, apc,Srpski, Ev, Hrvatski, Trke or ).Press or to select Digital SubtitleLanguage and then press or toselect your preferred language.

Press or to select Digital SubtitleLanguage 2nd and then press or to select your preferred language.

Press or to select Audio Lan-guage and then press or to selectyour preferred language.Press or to select Audio Lan-guage 2nd and then press or toselect your preferred language.

Press or to select Country andthen press or to select your country (UK, Italy, Netherlands, Sweden,Bulgaria, Greece, Russia, Norway, Ire-land, Portugal, Others, Austria, Belgium,Switzerland, Czech, Germany, Denmark,Spain, Finland, France, Polannd, Turkey,Hungary, Slovenia, Ukraine, Slovakia,Luxembourg or Romania).

Press to select Tuner Mode .NOTE: This option is country speci c in

the Quick Setup menu

Tuner Mode

BackRETURNSelect LocationOK

Antenna

Press or to select Antenna or Cable .

Press to select Location .

NOTE: The Location can also beaccessed in the SETUP menu.

Location

Store

To use the TV for the display in a store showroom,please select [Store].[Home] mode is recommended for normal use.

BackRETURNSelect Auto tuningOK

Press or to select Home or Store .


29/64

29

E n

g l i s h

When Store is selected, the con rmationwindow appears.

Location

No

BackRETURNSelect Auto tuningOK

You have selected [Store].This mode consumes more energy.

Are you sure you want to set to this mode?

Press or to select Yes or No .

Press to enter the Auto tuning menu.

NOTE: Please make sure the aerial is con-nected to the TV before tuning.

Auto tuning

Tuning Mode

Start Scan

ATV and DTV

OK

BackRETURN


Enter OK

Press or to select Tuning Mode and then press or to select ATV,DTV or ATV and DTV .Press or to select Start Scan andpress .

Auto tuning

ATVDTV

StopEXIT

Progress1 %0 %


Found00

The search will begin for all available stations.The slide bar will move along the line as thesearch progresses.

You must allow the television to completethe search.When the search is complete the television willautomatically select channel 1. This may not bea clear picture or the signal may be weak, sothe station order can be changed usingATV/DTV Manual Tuning in the SETUP menu.NOTE: The time will be set automatically by

transmission but can be advanced or decreased by using Local Time Setting in the DTV Settings screen.


30/64

30

English

Setting the ChannelsNote: When Parental Block is activated, the 4-digit password is needed.

Auto Tuning

The Auto tuning function will completely re-tune the television and can be used to updatethe channel list.

NOTE: It is recommended that Auto tuning isrun periodically to ensure that all newservices are added.

NOTE: All the current channels and settings,for example, the locked channels, willbe lost.

Tuner Mode - Antenna

Press MENU . Press or to selectSETUP and press to enter the sub-menu..

PICTURE SOUND SETUP APPLICATIONS PREFERENCES

Press or to select Auto tuning , andpress to enter the submenu.

Enter OK BackRETURN

1/2SETUP




EnglishGermany Antenna

OK

OK

OK

OK

OK

Press or to select Tuning Mode and press or to select ATV, DTV or ATV and DTV .

Auto tuning

Tuning Mode

Start Scan

ATV and DTV

OK

BackRETURN


Enter OK

Press or to select Start Scan andpress to start Auto Tuning .

Auto tuning

ATVDTV

StopEXIT

Progress2 %0 %


Found00

Tuner Mode - Cable

Switching between tuner modes will change thefeatures avaliable on your television.

All the current channels and settings, for exam-ple, the locked channels, will be lost.In the SETUP menu, press or to selectTuner Mode and press .Press or to select Yes or No .

Tuner Mode

No

This may change the features available on your TV. Continue?

BackRETURNEdit Enter OK


Press or to select Auto tuning , and

press to enter the submenu.

Enter OK BackRETURN

1/2SETUP




EnglishGermany

Cable

OK

OK

OK

OK

OK


31/64

31

E n

g l i s h

Press or to select Tuning Mode and press or to select ATV, DTV or ATV and DTV .

Auto tuning

Tuning ModeStart ScanScan typeStart Frequency (MHz)End FrequencyModulationSymbol RateNetwork ID

ATV and DTV

Quick Scan113.000 MHz

Auto Auto Auto Auto

OK

Previous settings will be lost! Press EXIT for no change.

BackRETURNEdit

Press or to select Operator Selec-tion , and press or to select Others , Ziggo or UPC .

NOTE: Operator Selection can onlybe adjusted when Country isNetherlands .

Press or to select Scan type , andpress or to select Full Scan or Quick Scan .NOTE: Channels with aweak signal may

be missed by Quick Scan .Press or to select Operato StartFrequency , End Frequency , Modula-tion , Symbol Rate or Network ID , anduse number key pad on the remote tode ne the information or select Auto for tuning.

Press or to select Start Scan andpress to start tuning.

NOTE:

The information should begiven by your cable provider.

Network ID is only availablefor Quick Scan .

Manual TuningThere are two TV modes: ATV and DTV thatcan be tuned-in manually using Manual Tun-ing .

ATV mode - Antenna/Cable


Press or to select ATV Manual Tun-ing and press to enter the submenu.

Enter OK BackRETURN

1/2SETUP


Auto tuning ATV Manual Tuning

DTV Manual TuningDTV Settings AV connectionPicture PositionQuick Setup


OK

OK

OK

OK

OK

Press p or q to select the programmeposition you want to arrange and thenpress .

ATV Manual TuningPosition

123456

ChannelC1C2C3C4C5C6

Station

BackRETURNSort Enter OK

Press p or q to move through the list toyour preferred position. As you do so theother stations will move to make room.Press t to store programme position.

ATV Manual TuningPosition

123456

ChannelC2C1C3C4C5C6

Station

BackRETURNStore


32/64


33/64

33

E n

g l i s h

DTV mode - Cable


Press or to select DTV Manual Tun-ing and press to enter the submenu.

Enter OK BackRETURN

1/2SETUP




EnglishGermany

Cable

OK

OK

OK

OK

OK

Press or to select Frequency ,Modulation or Symbol Rate ,and usenumber key pad on the remote to de nethe information or select Auto for tuning.

DTV Manual Tuning

OK

FrequencyModulationSymbol RateStart Scan

113.000 MHzQAM 16

4000 KS/s

Signal StrengthQuality

Weak Average Strong

Poor

BackRETURNEditInput09

Press or to select Start Scan andpress to start tuning.

Automatic Power DownThe TV will automatically turn itself off (standby)within 4 hours, if you do not touch the controlbuttons on the remote control or on the TVcontrol panel. It will also automatically turn off if no input signal is detected after approximately

15 minutes.In the SETUP menu, press or toselect Automatic Power Down .

Press or to select On or Off .

BackRETURN

2/2SETUP

OK

OK

OK

Edit

Automatic Power DownLocationSoftware UpgradeSystem InformationReset TV

Off Home

Reset TV

Selecting Reset TV will reset all TV settings totheir original factory values.

In the SETUP menu, press or toselect Reset TV and press .

Press or to select Yes to con rm or select No to exit and press .

Reset TV

No


BackRETURNSelect Enter OK


34/64

34

English

DTV Settings

ChannelsThe channel order may be changed to suit your personal preference.

NOTE: This function is only available in DTVmode.

Press MENU . Press or to selectSETUP and press to enter the sub-menu.


Press or to select DTV Settings andpress to enter the submenu.

Press or to select Channels andpress .

DTV Settings

ChannelsChannel OptionsSubtitle And AudioPasswordParentalLocal Time SettingCommon Interface

BackRETURN

OK

OK

OK

OK

OK

OK

SelectOK

Press or to select Channels .

Channels TV

BackRETURNRenumber Skip

Position803804805806807273

NameRossia 1Rossia 24NTVTRK 5 kamalBibigonService Information Radio Three

SortOK

Re-number

Press the button on the remote torenumber the highlighted channel.

Edit the channel number using the number keys on the remote and press .

Channels TV

BackRETURN

Position

804805806807273


Enter OK

8

Input09

Skip

Press the button on the remote. Aicon appears.

Channels TV

BackRETURNRenumber Skip

Position803804805806807

273

NameRossia 1Rossia 24NTVTRK 5 kamalBibigon

Service Information Radio Three

SortOK


35/64

35

E n

g l i s h

Press or to highlight the skip( ) box.

Channel Options


TVCH800

NameDEEJAY TV

Press to select. A tick appears in thebox.

NOTE: Skipped channels cannot be selectedby P or P but still be accessed bydirect entry (when tuned a icon willbe displayed in the banner to indicateas a skipped channel).

Parental Control

Locking channels stops the viewing of digitalchannels, and they can only be accessed byentering the password.

In the DTV Settings menu, press or to select Channel Options , and press

to enter submenu .

Press or to highlight the lock

( ) box.Press to select. A tick appears in thebox.If the password has already been set,password entry will be required to set thelocked channels.

Channel Options


TVCH800

NameDEEJAY TV

From this point on, when any of thechannels in the Channel Options listare selected, the password must beentered before they can be accessed.

Sort

Press p or q to select the desiredchannel and then press . A tick iconappears.

Channels TV

BackRETURNStoreOK

Position803804805806807273


Press p or q to select the channel youwish to swap with the one selected in Step8 and then press .The positions of the two channels areswapped.

Channels TV

BackRETURNStoreOK

Position804803805806807273


Channel OptionsThis function is to setup the Skip or Lock for currently watched channel.

Skip Channels

The feature allows you to set channel that will

be skipped when P or P are used totune.

In the DTV Settings menu, press or to select Channel Options , and press

to enter the submenu .

DTV Settings

ChannelsChannel OptionsSubtitle And AudioPasswordParental

Local Time SettingCommon Interface

BackRETURN

OK

OK

OK

OK

OK

OK

SelectOK


36/64

36

English

Subtitle and AudioYou can choose the Subtitle Type or AudioType from Normal or Hearing Impaired . If the Hearing Impaired is selected, it providessubtitle services to deaf and hard of hearingviewers with additional descriptions.

Subtitle Language or Audio Language allowa programme or lm to be viewed with a choiceof soundtrack language, provided they are cur-rently being broadcast.

In the DTV Settings menu, press or to select Subtitle And Audio , andpress to enter the submenu.

Press or to select Subtitle Type or Audio Type and press or to selectNormal or Hearing Impaired .

Press or to select Digital SubtitleLanguage , Digital Subtitle Language2nd , Audio Language or Audio Lan-guage 2nd and press or to selectyour preferred language.

PasswordChange the 4-digit parental control password.

The factory default password is 0000.

In the DTV Settings menu, press or to select Password , and press toenter the submenu.

DTV Settings

ChannelsChannel OptionsSubtitle And AudioPasswordParentalLocal Time SettingCommon Interface

BackRETURN

OK

OK

OK

OK

OK

OK

SelectOK

Enter a new 4-digit password, andre-enter the new password again tocon rm.

Password

New Password

Confirm Password

ParentalThis function blocks channels or programmesthat you do not want to or that you do not wantyour children to watch.

A password is required to access this function.

The factory default password is 0000.NOTE: When Parental Control is activated, youwill need to enter the 4-digit passwordbefore you enter the DTV Settings submenu under the SETUP menu. After auto tuning, all the channel blocks will becleared.

In the DTV Settings menu, press or to select Parental , and press toenter the submenu.

Enter the 4-digit password.P ress or to set the age rating fromage 4~18 or select None to turn this func-tion off or Block All .

NOTE: This function is available for pro-grammes with Age Rating information.

Common InterfaceThe Common Interface Slot, situated on the

side of the television, enables the insertion of a CAM (Conditional Access Module) and card.These are purchased from a service provider and allow additional subscription broadcaststo be viewed. For information, see a serviceprovider.

Insert the CAM and card into the CommonInterface Slot, following the instructionsprovided with the CAM. A box will appear on the screen to con rm that the CAM hasbeen inserted.

In the DTV Settings menu, press or to select Common Interface , andpress to enter the submenu.

Details of the CAM should now be avail-able.

NOTE: The software updating of CI Plus CAMmay be automatically executed. At thistime, any Recording/Reminder pro-gramme timer will be canceled.


37/64


38/64

38

English

Sound Controls

Volume Controls and Mute SoundVolumePress or to adjust the volume.

Sound MutePress on the remote once to turn the soundoff and again to cancel.

DualIf a programme or lm is being broadcast witha soundtrack in more than one language, theDUAL feature allows selection between them.

Press MENU . Press or to selectSOUND and press to enter thesubmenu..

PICTURE SOUND S ET UP A PP LI CAT IO NS P RE FE RE NC ES

Press or to select Dual , and press or to choose between Dual1 or Dual2 .

SOUND

OK

DualBassTrebleBalanceStable SoundSurround SoundBass BoostSPDIF Type

Audio Description

Dual1000

Off Off On

PCM

BackRETURNEnter OK

Bass, Treble and BalanceThe sound controls are accessible in digitaland analogue modes.


Press or to select Bass , Treble or Balance and press or to change thesetting.

Stable SoundThe Stable Sound feature limits high volumelevels in order to prevent the extreme changes

in volume that can occur when channelsare changed or a programme switches to acommercial.


Press or to select Stable Sound ,and press or to select On or Off .

Surround SoundSurround Sound enhances depth of thesound.


Press or to select Surround Sound ,and press or to select On or Off .

Bass BoostBass Boost enhances depth of the sound.


Press or to select Bass Boost , andpress or to select On or Off .

SPDIF Type

The feature allows you to select a digital audioformat.

Press MENU and press or to selectSOUND .

Press or to select SPDIF Type , andpress or to select PCM or Auto .


39/64

39

E n

g l i s h

Audio DescriptionAudio Description is an additional narrationdescribing on-screen action, body language, ex-pressions and movements for people with visualdisabilities while watching the TV. This functionenables you to choose the type of narrations.


Press or to select Audio Descrip-tion and press to enter the submenu.

Press or to select Audio Descrip-tion , and press or to select On or Off .

Audio Description

Audio DescriptionMixing Level

On20

Edit BackRETURN

Press or to select Mixing Level , andpress or to change the setting.Note: Mixing Level can only be ad-

justed when Au dio Description is On .

NOTE: Press the AD button on theremote control to switch the AudioDescription On or Off .


40/64

40

English

Subtitle

Widescreen viewingDepending on the type of broadcast being transmitted, programmes can be viewed in a number of formats.

Wide

Use this setting when watching awidescreen DVD, widescreen video tape

or a 16:9 broadcast (when available). Dueto the range of widescreen formats (16:9,14:9, 20:9 etc.) black bars may be visible

on the top and bottom of the screen.

4:3 Use this setting to view a true 4:3broadcast.

Super Live

This setting will enlarge a 4:3 image tot the screen by stretching the image

horizontally and vertically, holding better proportions at the centre of the image.

Some distortion may occur.

Cinema

When watching letterbox format lms/video tapes, this setting will eliminate or

reduce the black bars at the top and bottomof the screen by zooming in and selecting

the image without distortion.

Subtitle

When subtitles are included on a letterbox

format broadcast, this setting will raisethe picture to ensure that all the text isdisplayed.

14:9 Use this setting when watching a 14:9broadcast.

Native

When using a PC connected via HDMI thissetting will show the picture without over

scan, i.e. WYSIWYG.This option is only available when

watching video signal source via HDMI.

Press QUICK to display the Quick access menu. Use or to select the Picture Size ,and press or to select the option.

Quick access

Picture SizePicture ModeSleep Timer System Information

NormalStandard

00:00OK

You can choose the picture size from Wide, 4:3, Super Live, Cinema, Subtitle, 14:9, Native or Normal.

Using the special functions to change the size of the displayed image (i.e. changing the height/widthratio) for the purposes of public display or commercial gain may infringe on copyright laws.


41/64

41

E n

g l i s h

Available Picture Size and Position Control

Wide 4:3 Super Live Cinema Subtitle 14:9 Native NormalDot by

Dot

ATV o o o o o o x x x

DTVSD o o o o o o x x x

HD o o o o x o o x x

Scart o o o o o o x x x

CVBS o o o o o o x x x

YPbPr SD o o o o o o x x x

HD o o o o x x x x x

HDMISD o o o o o o o x x

HD o o o o x x o x x

D-SUB o x x x x x x o oDVI o x x x x x x o o


42/64

42

English

Picture PositionThe Picture Position may now be adjusted to suitpersonal preference.



Press or to select Picture Position and press to enter the submenu.

Enter OK BackRETURN

1/2SETUP





OK

OK

OK

OK

OK

Press or to select an option youwant to adjust, and press or toadjust the settings as required.

Picture Position

Horizontal positionVertical positionReset

00

Edit BackRETURN

OK

Picture ModeYou can adjust the picture appearance by se-lecting the preset value in picture mode basedon the programme category.

Press MENU . Press or to selectPICTURE and press to enter thesubmenu..

PICTURE SOUND SET UP APPLICATIONS PREF ERENCES

Press or to select Picture Settings and press to enter the submenu.

Picture Settings

OK

Picture ModeBack LightContrastBrightnessColour TintSharpnessBlack/White LevelCinema ModeColour TemperatureStatic GammaReset

Standard70955050050

MiddleOn

Medium+4

Edit BackRETURN

Press or to select Picture Mode andpress or to select Dynamic , Stand-ard , Mild , Movie , Game or User .

Note: Game is not available for the TVinput mode.

Picture PreferencesYou can customise current picture modesettings while selecting User .

In the Picture Settings menu, press or to select Back Light , Contrast ,Brightness , Colour , Tint , Sharpness .

Press or to suit your preference.

Picture ControlsMost of the picture controls and functions are available in both digital and analogue modes.

Note: Features not available will be greyed out.


43/64

43

E n

g l i s h

Black/White LevelThis function increases the strength of darkareas of the picture, which improves picturede nition.

In the Picture Settings menu, press or to select Black/White Level .Press or to adjust the level fromOff , Low , Middle to High . The effectdepends on the broadcast and is mostnoticeable on dark colours.

Cinema Mode A movie lms picture runs at 24 frames a second,whereas movie software such as DVD, etc., thatyou enjoy watching on television at home runs

at 30 (NTSC) or 25 (PAL) frames a second. Toconvert this signal to reproduce a smooth motionand picture quality, select the Cinema mode .

In the Picture Settings menu, press or to select Cinema Mode .


Colour Temperature

Colour Temperature increases the warmth or coolness of a picture by increasing the red or blue tint.

In the Picture Settings menu, press or to select Colour Temperature .Press or to select Colour Tem-perature and press or to selectMedium , Cool or Warm to suit your preference.

Colour Temperature

Colour TemperatureRed LevelBlue LevelGreen Level

Medium000

Press or to select Red Level , BlueLevel or Green Level and press or to adjust the settings as required.

Static GammaThe static gamma feature allows you to adjustthe levels of black in the picture.

In the Picture Settings menu, press or to select Static Gamma .

Press or to select the number of Static Gamma (-5~+5).

ResetThis feature resets all picture settings to thefactory settings.In the Picture Settings menu, press or to select Reset and press to reset settings.

NOTE: If any picture settings have not beenchanged, Reset is not available.

Active BacklightWhen Active Backlight Control is activated,it will automatically optimise the backlightinglevels for dark scenes.

Press MENU . Press or to selectPICTURE and press to enter thesubmenu..

Press or to select Active BacklightControl .


3D Colour ManagementWhen 3D Colour management is set to On itallows the Base colour adjustment feature tobecome available.You can adjust the picture colour quality by

selecting from 6 base colour adjustments :Red, Green, Blue, Yellow, Magenta or Cyan .

In the PICTURE menu, press or toselect 3D Colour Management .


NOTE: When a DVD movie with subtitle isplaying back, this mode may not workcorrectly.


44/64

44

English

Base Colour AdjustmentThe Base Colour adjustment feature allowsthe adjustment of individual colours to suit per-sonal preference. This can be useful when usingan external source. It only can be adjusted when3D Colour management is set to On .

In the PICTURE menu, press or toselect Base Colour Adjustment andpress to enter the submenu.

Press or to select an item you wantto adjust and press .

Base Colour AdjustmentBrightnessHue Saturation

RedGreenBlueYellowMagentaCyanReset

000000

000000

000000

OK

EditOK BackRETURN

Press or to select Hue, Saturation or Brightness.

Base Colour Adjustment

BrightnessHue Saturation

0Red

Press or to adjust the settings asrequired.

NOTE: In the PC Input mode, this function isnot available.

Digital Noise ReductionDNR (Digital Noise Reduction) enables youto soften the screen representation of a weaksignal to reduce the noise effect.

In the PICTURE menu, press or toselect DNR .

Press or to select Off, Low, Mid-dle or High .

NOTE: This function is not available for HDMI

input.

MPEG NR Noise ReductionWhen watching a DVD, the compression maycause some words or picture elements tobecome distorted or pixelated.Using the MPEG NR feature reduces this ef-fect by smoothing out the edges.

In the PICTURE menu, press or toselect MPEG NR .

Press or to select Off, Low, Mid-dle or High .


45/64

45

E n

g l i s h

View Photo Files

Insert a USB storage device and presson the remote.Use or to select MEDIA and press

.

TV

1

2

3CHDMI1

HDMI2

MEDIA

PC

Inputs

Enjoy Photos through USB PortThe Photo Viewer allows you to playback image les from a USB storage device.

Image PhotoResolution

(Mstat suggest)Required DRAM size

(Mbytes)Remark

JPEGBase-line 15360x8704

(1920x8x1088x8)3.96 Depends on RAM size

Progressive 1024x768 6.00

PNGnon-interface 9600x6400 3.66

interface 1200x800 3.66

BMP 9600x6400 3.66

NOTE:

Resolution is a reference design, limited only by DRAM (Dynamic Random Access Memory)size and performance

The larger the resolution, the more memory required The smaller the resolution, the less performance required (decrease the time required to

display a picture)

A JPEG decoder is a hardware decoder, with a max resolution of 15360 x 8704 A PNG/BMP decoder is a software decoder (running on a co-processor), with a max resolu-

tion that depends on DRAM size

Press or to select PHOTO andpress to enter the submenu.

USB 2.0

PHOTO MUSIC MOVIE

MOVE SelectOK EXITEXIT

Press , , or to select the folder you wish to view and press to enter.Press P or P to page up or down.

MOVE SelectOK

USB:\Return

PageP

1 \ 1

EXITEXIT


46/64


47/64

47

E n

g l i s h

Enjoy Music through USB PortThe MP3 Player allows you to playback music les from a USB storage device.

Audio Codec File Extension Bit Rate Remark

MPEG1 Layer2 MP3 32Kbps~ 448Kbps(Bit rate)32KHz ~ 48KHz(Sampling rate)

MPEG1 Layer3 MP3 32Kbps ~ 320Kbps(Bit rate)32KHz ~ 48KHz(Sampling rate)

Play Music FilesInsert a USB storage device and press

on the remote.Use or to select MEDIA and press

.

TV

1

2

3CHDMI1

HDMI2

MEDIAPC

Inputs

Press or to select MUSIC and pressto enter the submenu.

USB 2.0

PHOTO MUSIC MOVIE


Press or to select the folder you wishto play and press to enter.Press P or P to page up or down.

MOVE SelectOK

USB:\

Return

Music

Photo

Video

PageP

1 \ 1

Music

EXITEXIT

Press or to select the desiredmusic and press to play.

USB:\Music

Return

Up Folder

001.MP3

002.wma

003.avi

Return

1 \ 1

MOVE SelectOKPageP EXITEXIT

When listening music, press or to: / : Play or pause the selected

music

: Rewind the selected music : Fast forward the selected

music

: Go to the previous music : Go to the next music : Stop play : Select the desired repeat

interval:- Repeat Off

- Repeat One: Repeat the selectedmusic once

- Repeat Folder: Repeat all musicles in the selected folder

: Show play list : Music information

and press to con rm the setting.


48/64

48

English

Repeat Settings

Press or to select .

Press to select Off , One or Folder .

Using the Play List

Press or to select and press .

Press or to select music and pressto play music.

Press EXIT on the remote to collapsethe list.

00001 / 00003001.MP3

00:00:02 / 00:02:42 16

Off

Play List

001.MP3002.wma003.avi

001.MP3

1 / 1

MOVE SelectOKPageP EXITEXIT

Music InfoInfo display le status information (contentnumber, music title, Bit Rate, Artist, Sampling,Year, and size).

Press or to select and press .

00001 / 00003001.MP3

00:00:02 / 00:02:42 16

Off

Info

001.MP3

Album:Title:Bit Rate:

Artist:Sampling:Year:Size:

Music01

320KSinger

44K2010

6366 KBytes


The information will be removed by time-out (about 15 sec) or press to exit.


49/64

49

E n

g l i s h

Enjoy Videos through USB PortThe Video Viewer allows you to playback video les from a USB storage device.

FileExtension

Container Video Codec SPEC Bit Rate(Mbit/sec) Profle Remark

dat, mpg,mpeg

MPG,MPEG

Mpeg1,2 1080P@30fps 20 Main Pro le

MP4: GMCis not sup-

ported

ts, trp, tp,m2ts

MPEG2 -TSH264-TS MPEG2 ,H.264

1080P@30fps 20

H264: Main Pro le and HighPro le @Level 4.0MPEG2: MP@HL

vob MPEG2 -PS MPEG2 1080P@30fps 20 MPEG2: MP@HL

mp4 AVI, MP4

MPEG4Xvid 1.00, Xvid 1.01,

Xvid 1.02, Xvid 1.03,

Xvid 1.10-beta1/2H.264

1080P@30fps 20

H264: Main Pro le and HighPro le @Level 4.0MPEG4: Simple Pro le and

Advanced Simple Pro le @Level 5

mkv MKV H.264, MPEG1,2,4 1080P@30fps 20

H264: Main Pro le and HighPro le @ Level 4.0MPEG4: Simple Pro le and

Advanced Simple Pro le @Level 5

avi AVI(1.0, 2.0),DMF0,1,2

MPEG2, MPEG4Xvid 1.00, Xvid 1.01,

Xvid 1.02, Xvid 1.03,

Xvid 1.10-beta1/2H.264

1080P@30fps 20

MPEG2: MP@HL

MPEG4: Simple Pro le and Advanced Simple Pro le @

Level 5

MotionJPEG AVI JPEG

640x480@ 30fps 10


50/64

50

English

Press MENU to change the settingswhen viewing a video.

MOVE SelectOK

00001 / 00001002.wmv

00:00:08 / 00:02:28 16

Off

Pause

Play

EXITEXIT

Press or to: / : Play or pause the selected

video

: Fast back the selected video : Fast forward the selected video : Go to the previous video : Go to the next video : Stop play : Select the desired repeat

interval:- Repeat Off - Repeat One: Repeat the selected

video once- Repeat Folder: Repeat all video

les in the selected folder : Repeat from A to B

- Set A: A-SetRepeat and Start

- Set B: B-SetRepeat and repeat fromA to B

: Show play list : Video information : Slow forward the selected

video

: Step forward the selected video : Allows you to input a search

timeand press to con rm the setting

Play Video FilesInsert a USB storage device and press

on the remote.Use or to select MEDIA and press

.

TV

1

23C

HDMI1

HDMI2

MEDIAPC

Inputs

Press or to select MOVIE and pressto enter the submenu.

USB 2.0

PHOTO MUSIC MOVIE


Press or to select the folder you wishto view and press to enter.Press P or P to page up or down.

USB:\

Return

Music

Photo

VideoVideo

1 \ 1

MOVE SelectOKPageP BackRETURN

Press or to select the desired videoand press to play.


51/64

51

E n

g l i s h

Video InfoInfo display le status information (contentnumber, video title, audio track, subtitle, pro-gram, size, etc.).

Press MENU to change the settingswhen playing a video.

Press or to and press .

00001 / 0000127.avi

00:00:08 / 00:02:28 16

Off

Info.

27.avi

Resolution: AudioTrack:Subtitle:Program:Size:

720 x 5761 / 1/ 0/ 0

9172 KBytes

Close

MOVE Select EXITEXIT

The information will be removed by time-out (about 15 sec) or press to exit.

Goto Time

The feature allows you to view a selected timeduring the video.

Press MENU to change the settingswhen playing a video.

Press or to select and press

Use the number key pad on the remote toenter time.

00001 / 00001002.wmv

00:00:08 / 00:02:28 16

Off

Goto Time

Input search time:

0 0 : 0 0 : 0 0

OK


Repeat SettingsPress MENU to change the settingswhen playing a video.

Press or to select and pressto select Off , One or Folder .

SetPress MENU to change the settingswhen playing a video.

Press or to select and pressto select Set A , Set B or None .

Slow Forward

The feature changes forward speeds.Press MENU to change the settingswhen playing a video.

Press or to select and pressto select SF2X , SF4X , SF8X , SF16X or Play .

Step ForwardThe feature allows you to view a video one frame

at a time.Press MENU to change the settingswhen playing a video.

Press or to select and pressto play step by step.

Using the Play ListPress MENU to change the settingswhen playing a video.

Press or to select and press

Press or to select a video andpress to play the video.Press EXIT on the remote to collapsethe list.

Move SelectOK

00001 / 0000127.avi

00:00:08 / 00:02:28 16

Off

Playlist

1 / 1

27.avi

PageP EXITEXIT


52/64

52

English

Equipment ControlThe HDMI-LINK mode on the televisionsremote control allows the control of connectedHDMI-LINK equipment being watched.

To control the HDMI-LINK input source, rstselect the equipment with HDMI-LINK inputsource selection, then switch the mode on theremote control to HDMI-LINK and press anybuttons.

The available functions are dependent on theequipment connected. Not all the remote con-trol keys may be available. Please refer to theoperation manual for each piece of equipmentconnected.

NOTE: The television features that can be con-trolled by the connected equipment are:Standby, Volume and Sound Mute.

HDMI-LINK ControlsThis feature uses CEC (Consumer Electronics Control) technology, and allows the control of ToshibaHDMI-LINK compatible equipment from the televisions remote control.

Note: Not all Toshiba products currently support HDMI-LINK .

Input Source SelectionWhen any equipment using CEC technologyis connected, the HDMI-LINK icon will appear in the input source list allowing selection of individual devices.

Press . A list will appear on screen showingmodes and all stored external equipment.

TV

12

3C

HDMI1HDMI2

MEDIA

PC

Inputs


53/64

53

E n

g l i s h

One Touch Play

The function of HDMI-LINK will automaticallypower on the television that was in standbymode and switch the televisions input sourceto the port connected with the audio/videoequipment by powering-on or playing from theaudio/video equipment.

NOTE: This feature is dependent on theconnected equipment and televisionsetting.

System StandbyThis feature automatically switches the con-nected equipment into standby when thetelevision goes into standby and converselyfor the television to switch into standby whenconnected equipment goes into standby. It isselected in the HDMI-LINK setup menu.

NOTE: This feature is dependent on theconnected equipment and televisionsetting.

System Audio ControlUsing the Speaker Preference feature allowsthe televisions remote control to adjust thevolume or mute the sound of the speakers con-nected to the television via an AV ampli er.Ensure that the connected AV ampli er andHDMI-LINK equipment are selected in theinput source selection and that the Speaker Preference is set to Audio Receiver in theHDMI-LINK setup menu.

NOTE: When the AV Ampli er is switched on,its input source changed or the volumeadjusted, the sound will be output fromthe AV Ampli ers speakers even if TVSpeakers has been selected. Turn thetelevision off then on again to outputthe sound from the TVs speakers.

The full function may not work and is depend-ent on the Ampli er being used.

Enable HDMI-LINK

When the Enable HDMI-LINK is set to On , itallows the other functions to be enabled.

Press MENU . Press or to selectPREFERENCES and press to enter the submenu.


Press or to select HDMI-LINK Set-up , and press to enter the submenu.

Enter OK BackRETURN

PREFERENCES

HDMILINK SetupTeletextPanel Lock

Auto Format4:3 StretchBlue ScreenSide Panel

Auto

Off OnOff On1

OK

Press or to select Enable HDMI-LINK , and press or to select On or Off .

HDMI-LINK Setup

Enable HDMILINK Auto Power On Auto Standby Amplifier ControlSpeaker Preference

OnOnOnOn

TV Speakers

Edit BackRETURN

Auto Power OnThe Auto Power On setting allows the televi-sion to be automatically switched On or Off if aHDMI-LINK device is turned On or Off .

In the HDMI-LINK Setup menu, press or to select Auto Power On .


HDMI-LINK MenusBy activating the Enable HDMI-LINK feature in the HDMI-LINK setup menu, individual HDMI-LINK features can then be activated.


54/64


55/64

55

E n

g l i s h

Preference Controls

On Timer This feature allows you to set the television toturn on automatically to a preset channel at a

certain time of day or after a certain length of time. When On timer is set to On , the green OnTimer indicator on the front of the television is lit.

Press MENU . Press or to selectAPPLICATIONS and press to enter the submenu.


Press or to select On timer andpress to enter the submenu.

Enter OK BackRETURN

APPLICATIONS

EPGOn timer Sleep Timer

00:00OK

Press or to select Enable On Timer and press or to select On or Off .

On timer

Enable On Timer Enable DTV ClockPower On TimeRepeatInputChannelVolumeTime Until Power On

OnOn

00:00ONCE ATV

030

00:00

Edit BackRETURN

NOTE: The settings are only availablewhen Enable On Timer is On .

Press or to select Enable DTV Clock and press or to select On or Off .NOTE: Power On Time and Repeat are

only available when Enable DTVClock is On .

Press or to select Power On Time and press or or use the number keypad on the remote to enter the time.

Press or to select Repeat andpress or to select ONCE , DAILY ,Mon.~Fri. , Mon.~Sat. or Sat.~Sun. .

Press or to select Input and press or to select ATV, EXT 1 , EXT 2 , EXT 3 ,HDMI 1 , HDMI 2 , PC or DTV.

For DTV, press or to selectChannel and press or to change the channelnumber.For ATV, press or to select Channel

and press or to change the channelnumber or use the number key pad on theremote to enter the channel number.

NOTE:

Channel is only availablewhen the Input is ATV or DTV.

Blank screen will appear if nottuned.

Press or to select Volume and press or to modify the volume, or use thenumber key pad on the remote to enter thevolume.

Press or to select Time Until Power On and press or or use the number key pad on the remote to enter the time for the TV to turn on automatically.

NOTE: Time Until Power On is onlyavailable when Enable DTVClock is Off .

Sleep Timer The television can be set to turn itself Off after a certain length of time.

Press MENU and press or to selectAPPLICATIONS .

Press or to select Sleep Timer (Turnoff the TV).

Press or to modify the time the TVshould turn off, or use the number key padon the remote to enter the time.


56/64


57/64

57

E n

g l i s h

Panel LockPanel Lock disables the buttons on the televi-sion. All buttons on the remote control can still beused.

Press MENU . Press or to selectPREFERENCES and press to enter the submenu.


Press or to select Panel Lock andpress or to select On or Off ..

BackRETURN

PREFERENCES



Auto

Off OnOff On1

OK

Edit

When Panel Lock is On , a reminder will appear

when the buttons on the television are pressed.If the standby button is pressed the television willswitch off and can only be brought out of standbyby using the remote control.

Auto Format (Widescreen)When this television receives a true Widescreenpicture and Auto format is On, it will automati-cally be displayed in Widescreen format, irre-spective of the televisions previous setting.

In the PREFERENCES menu, press or to select Auto Format .


4:3 StretchWhen 4:3 Stretch is activated, this functionwill switch 4:3 format programmes into a fullscreen picture.

In the PREFERENCES menu, press or to select 4:3 Stretch .


NOTE: In HDMI signal format, this function isavailable.

Blue ScreenWhen Blue Screen is selected, the screen willturn blue and the sound will be muted when nosignal is received.

In the PREFERENCES menu, press or to select Blue Screen .


NOTE: This function is not available in DTVmode.

Side PanelThe Side Panel feature lightens or darkens theband each side of the screen when in 4:3 or 14:9 format. This helps prevent image reten-tion of the band and can also make viewing inbright or dark conditions more comfortable.

In the PREFERENCES menu, press or to select Side Panel .Press or to adjust the settings asrequired.

System InformationIn the SETUP menu, press or to selectSystem Information and press to displaythe model information and rmware version.

System Information

BackRETURN

TOSHIBA2010

Dec 8 2010, 11:03:37, FW: v0.08 (ER)


58/64

58

English

System UpgradePress MENU . Press or to selectSETUP and press to enter the sub-menu.


Press or to select SystemUpgrade and press to enter thesubmenu.

Press or to select Auto Upgrade and press or to select On or Off .

Software Upgrade

Auto UpgradeUSB Upgrade

Off

Edit BackRETURN

OK

Insert a USB storage device.Press or to select USB Upgrade and press to start upgrading thermware.

USB Upgrade

0 %

BackRETURNEnter OK

NOTE: Firmware upgarding is suggested tobe done by the professional servicepersonnel.


59/64

59

E n

g l i s h

Control ButtonsBelow is a guide to the functions of the remotecontrol text buttons.

Displays the index/initial page:Press to access the index/initial page. Thepage displayed is dependant on the broad-caster.

Reveals concealed text:To discover the solutions on quiz and jokepages press the button.

Holds a wanted page: At times it is convenient to hold a page of text.Press and will appear in the top left of thescreen. The page will be held on-screen untilthe button is pressed again.

Enlarges the text display size:Press once to enlarge the top half of thepage, press again to enlarge the bottom half of the page. Press again to revert to normal size.

Selects a page while viewing a normalpicture:Enter the page number then press , a nor-mal picture will be displayed. The television willindicate when the page is present by display-ing the page number at the top of the screen.To display news ashes:Select the news ash page for the chosentext service (see the index page of your textservice).By pressing , news ashes will be dis -played as and when they are broadcast. Press

again to cancel the display.How to change the page:Press or to change the page.Press or to change the sub page when asub page is available.The news ash page must be cancelled beforechanging channels.

Setting the ModesIn the PREFERENCES menu, press or to select Teletext .

PREFERENCES

BackRETURN

PREFERENCES



Auto

Off OnOff On1

OK

Edit

Press or to select Auto or LIST .

Navigating Pages using AutoIf Fastext is available, four coloured titles willappear at the base of the screen.

To access one of the four given subjects, pressthe relevant coloured button on the remote control.For further information on your particular textsystem(s), see the broadcast text index pageor, consult your local Toshiba dealer.

Navigating Pages using LISTIf Fastext is available, four coloured titles withnumbers 100, 200, 300 and 400 have beenprogrammed into the televisions memory.To view these pages press the relevant col-oured buttons.To change these stored pages press the relevantcoloured button and enter a new 3 digit number.This number will change in the top left of thescreen and in the coloured highlight. Press OK to store. The bars at the bottom of the screenwill ash white. Whenever OK is pressed all four page numbers showing at the bottom will bestored and the previous ones will be lost.

If OK is not pressed the selection will be forgot-ten when text is cancelled.Other pages may be viewed by entering the 3digit page number but DO NOT press OK or these pages will be stored.

Text Services and Text InformationThis television has a multi-page text memory, which takes a few moments to load.

7/27/2019 Toshiba AV833 32 English Specific

Documents

Toshiba AV833 32 English Specific[1]