Upload
duonghanh
View
278
Download
0
Embed Size (px)
Citation preview
Universal Group®
For more information visit www.theuniversalgroup.com or call 1.800.225.1845
The Universal Group, LLC1025 Thomas Busch Memorial HighwayPennsauken, New Jersey 081101.800.225.1845856.488.1800Fax 1.800.360.9636on © 2018 The Universal Group, LLC All Rights Reserved
Torque Rods
Fabricated rod body works in conjunction with our proprietary bushings to meet a large footprintfor heavy loads and energy absorption from higharticulation and side load events.
Offers easy and inexpensive flexibility to create a variety of torque rod lengths. Lengthvariety significantly reduces the need for shimswhich can compromise the connection integrityif not secured properly or used with correct shims.
One-piece design supports uptime by removing and replacing with the original one-piece length foran accurate fit the first time.
Curled outer metal casing places rubber inpre-compression mode to “harness” the energyand perform at the highest peak, providingbest-in-class durability and performance.
Proprietary rubber material helps reduce costof ownership by absorbing horizontal, verticaland torsional forces for long component life.
High strength bond of rubber to inner metaleliminates friction between the inner metaland rubber, minimizing bushing wear and increasing component life cycle.
Hardened steel bar pins and taper pins deliver increased resistance against wear and abrasion to extend the service intervalsof the component.
Heavy-duty - Recommended for 40,000 lb. to 52,000 lb. capacity suspensions in most vocational applications.
Severe-duty - Recommended for 60,000 lb. to 70,000 lb. capacity suspensions. Also available for 40,000 lb. to 52,000 lb. capacity suspensions for even longer service intervals.
The TRAXX ROD Performance - Up to *five times the performance life of conventional double shot bushings and similar performance of ball and socket torque rods, with better energy absorption, delivering superior bushing retention and longer component life for heavy-and severe-duty applications.
TM
TMTRAXX ROD Torque Rods
The TRAXX ROD family uses the Smart Numbering System, in which each digit signifies the body style, bushing combination, bushing hole diameter, bushing clocking angle and the torque rod length.
TMTRAXX ROD Torque Rods Smart Numbering SystemTRAXX ROD Torque Rods
Hendrickson TRAXX ROD Torque Rods
Part Number Description LengthHole Size Type Automann
DaytonParts Flagg Atro Other
Hendrickson Traxx Rod for PRIMAAX
EX / Kenworth / Peterbilt Refuse
Hendrickson Traxx Rod for PRIMAAX
EX / Kenworth / Peterbilt Refuse
Hendrickson Traxx Rod for PRIMAAX
EX / Autocar / Other
Hendrickson Traxx Rod for Peterbilt
AirTrac, Air Leaf
Hendrickson Traxx Rod for PRIMAAX
EX / Hino
Hendrickson Traxx Rod for PRIMAAX
EX/FIREMAAX EX / Fire and Rescue
Hendrickson Traxx Rod PRIMAAX EX
/ Navistar
Hendrickson Traxx Rod for PRIMAAX
EX / Navistar / Caterpillar
Hendrickson Traxx Rod for Peterbilt
Low Air Leaf / Flex Air
22.05”
22.25”
22.63”
22.83”
23.42”
24.4”
25.25”
25.39”
25.56”
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
S/S
S/S
S/S
S/S
S/S
S/S
S/S
S/S
S/S
TMR512
TMR617
TMR684
TMR551
TMR481
TMR634
TMR703
TMR532B
345-241
345-215
PB15
PB46
TR50-42560
TR50-42565
TR50-42575
TR75-41059
TR50-42620
TR50-42640
TR00-41270
067428-560 /
072000-560C
067428-565
072000-575S
STR-1003
072000-595
062350-620
067428-640
067428-645 /
STR-1002
STR-1005
H-8240-0000-560
H-8240-0000-565
H-8240-0000-575
H-8240-0000-580
H-8240-0000-595
H-8240-0000-620
H-8240-0000-640
H-8240-0000-645
H-8240-0000-650
The Universal Group, LLC
Hendrickson TRAXX ROD Torque Rods
Hendrickson Traxx Rod for HAULMAAX /
Walking Beam / Peterbilt / Other
Hendrickson Traxx Rod for HAULMAAX /
Walking Beam / Kenworth
Hendrickson Traxx Rod for HAULMAAX /
Walking Beam / Kenworth
Hendrickson Traxx Rod for HAULMAAX /
Walking Beam / Fire and Rescue
Hendrickson Traxx Rod for HAULMAAX /
Walking Beam / Freightliner
Hendrickson Traxx Rod for HAULMAAX/
Walking Beam / Mack / Waste
Management Spec
Hendrickson Traxx Rod for HAULMAAX /
Walking Beam / Navistar
Hendrickson Traxx Rod for HAULMAAX /
Walking Beam / Autocar
23.12”
24.02”
24.25”
24.4”
24.6”
25”
25.39”
25.98”
H-8244-0099-585
H-8244-0099-610
H-8244-0099-615
H-8244-0099-620
H-8244-0099-625
H-8244-0099-635
H-8244-0099-645
H-8244-0099-660
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
S/T
S/T
S/T
S/T
S/T
S/T
S/T
S/T
TMR674
TMR69
TMR673
TMR480
TMR640
TMR501
345-887
TR50-41587
TR59-41376 /
TR50-41610
TR50-41615
TR50-41620
TR50-41625
TR59-41150 /
TR50-41635
TR50-41645
072350-585 \
072350-585S \
062350-590
062350-615
077130-615
072350-620
062350-630
072350-660
Part Number Description LengthHole Size Type Automann
DaytonParts Flagg Atro Other
Part Number Description Type OEM Length
ShaftDiameter
HoleSize Automann
DaytonParts Flagg
STR-1000 Freightliner 681 326 6716 23 15/16 5/8 TMR514 345-212 FL39
STR-1001 Peterbilt HighConfinement C65-6002 253/4 11/4 5/8 TMR553 345-884
STR-1002 International HighConfinement 501565C2 253/8 5/8 TMR533 345-904 IH22
STR-1003 Peterbilt 03-02439 22 7/8 5/8 TMR518 345-210 PB15
STR-1004 Peterbilt 03-04327 17 11/32 1 1/4 5/8 TMR520 345-211 PB33
STR-1005 Peterbilt Sealed 03-05108 25 9/16 5/8 TMR532 345-215 PB46
STR-1006 Mack 20.0” Sealed 17QF460P200 20 1 1/8 5/8 TMR568
STR-1007 Mack 21.5” Sealed 17QF460P215 21 1/2 1 1/8 5/8 TMR571
STR-1008 Mack 22.0” Sealed 17QF460P220 22 1 1/8 5/8 TMR555
STR-1009 Mack 22.5” Sealed 17QF460P225 22 1/2 1 1/8 5/8 TMR573
STR-1010 Mack 24.5” Sealed 17QF460P245 24 1/2 1 1/8 5/8 TMR576
STR-1016 Mack 21” 17QF473M2 21 1 1/8 5/8 TMR541 345-892
STR-1017 Mack 21” Sealed 17QF460P210 21 1 1/8 5/8 TMR570
Non-Rebushable
Non-Rebushable
Kenworth
Ford
Fixed Length Torque Rods - Straddle / Straddle
Fixed Length Torque Rods - Straddle / StraddlePart Number
Part Number
Description
Description
Type
Type
OEM
OEM
Length
Length
ShaftDiameter
ShaftDiameter
HoleSize
HoleSize
Automann
Automann
DaytonParts
DaytonParts
Flagg
Flagg
Flagg
STR-1000 Freightliner 681 326 6716 23 15/16 5/8 TMR514 345-212 FL39
STR-1001 Peterbilt HighConfinement C65-6002 253/4 11/4 5/8 TMR553 345-884
STR-1002 International HighConfinement 501565C2 253/8 5/8 TMR533 345-904 IH22
STR-1003 Peterbilt 03-02439 22 7/8 5/8 TMR518 345-210 PB15
STR-1004 Peterbilt 03-04327 17 11/32 1 1/4 5/8 TMR520 345-211 PB33
STR-1005 Peterbilt Sealed 03-05108 25 9/16 5/8 TMR532 345-215 PB46
STR-1006 Mack 20.0” Sealed 17QF460P200 20 1 1/8 5/8 TMR568
STR-1007 Mack 21.5” Sealed 17QF460P215 21 1/2 1 1/8 5/8 TMR571
STR-1008 Mack 22.0” Sealed 17QF460P220 22 1 1/8 5/8 TMR555
STR-1009 Mack 22.5” Sealed 17QF460P225 22 1/2 1 1/8 5/8 TMR573
STR-1010 Mack 24.5” Sealed 17QF460P245 24 1/2 1 1/8 5/8 TMR576
STR-1016 Mack 21” 17QF473M2 21 1 1/8 5/8 TMR541 345-892
STR-1017 Mack 21” Sealed 17QF460P210 21 1 1/8 5/8 TMR570
STR-1019 Freightliner 24.21” Sealed 16-15632-000 24.21 1 1/4 5/8 MR536 345-916
STR-1020 International 18.125” 588117C91 18 1/8 1 1/4 5/8 TMR510 345-188 IH11
STR-1021 International 22” 588118C91 22 1 1/4 5/8 TMR512T 345-187 IH12
STR-1022 Freightliner 16.625” 16-13053-000 16 5/8 1 9/16 5/8 TMR516 345-208 FL48
STR-1023 Freightliner 18.187” 16-10420-001 18 1/5 1 9/16 5/8 TMR513 345-185 FL23
STR-1024 Freightliner 23” 681-326-63-16 23 1 9/16 5/8 TMR515 345-213 FL42
STR-1011 Mack 18.25” Sealed 17QF463P183 18 1/4 1 1/4 5/8 TMR591 345-226
STR-1012 Mack 18.25” Sealed 17QF464P183 18 1/4 1 1/8 5/8 TMR562
STR-1013 Mack 20.25” Sealed 17QF463P203 20 1/4 1 1/4 5/8 TMR593 345-227
STR-1014 Mack 19.75” Sealed 17QF463P198 19 3/4 1 1/4 5/8 TMR592
STR-1015 Mack 24.5” Sealed 17QF463P245 24 1/2 1 1/4 5/8 TMR596 345-229
STR-1018 Mack 25.5” Sealed 17QF464P255 25 1/2 1 1/8 5/8 TMR566
588118C92
16-13498-000
E-3546
E-8808
Fixed Length Torque Rods - Straddle / Tapered
The Universal Group, LLC
ZF Uni-Rod Full Ball Three Piece Kits
Part NumberReference Part Number
SuspensionRating (lbs.) Description Automann
DaytonFlagg
STRU-3001 HU-2040 20K-38K
STRU-3002 BU-3436 34K-36K
STRU-3003 HU-3436 34K-36K
STRU-3004 HU-3436L 34K-36K
STRU-3005 SBU-3436 34K-36K
STRU-3006 SU-3436 34K-55K
STRU-3007 IHU-3444* 34K-65K
STRU-3008 MU-3800 38K-55K
STRU-3009 SMU-3800 38K-55K
TMR058 345-814 TR17
TMR008 345-817 TR3
TMR060 345-811 TR18
TMR061 345-812
TMR010 345-807 TR4
TMR006 345-803 TR2
TMR054 345-809 TR15
TMR012 345-818 TR5
TMR014 345-804 TR6
Standard Hollow Ball, Both Ends (7/8” Dia. Hole), Neway Air Ride Suspension
Standard Ball Stud (Hendrickson) Both Ends(1 1/8”-12 Threads)
Standard Hollow Ball,Both Ends (7/8” Dia. Hole), 20”-30” Fruehauf Air Ride Suspension
Standard Hollow Ball, Both Ends (7/8” Dia. Hole), 30”-40” Fruehauf Air Ride Suspension
Standard Ball Stud (Hendrickson) One End (1 1/8”-12Thread). Standard Straddle Ball, Other End
Standard Straddle Ball, Both Ends. Also Used as A Track Bar And For On-Highway Use Up To 55,000 Suspension.
Offset Straddle Ball, One End. Standard hollow Ball, Other End (1 1/8” Dia. Hole). Navistar Suspension Only.
Ball Stud, Both Ends (1 1/4”-12 Thread). Mack Suspension Only.
Ball Stud, One End (1 1/4”-12 Thread). Standard Straddle Ball, Other End. Mack Suspension Only.
* Indicates Heavy - Duty Kit
STRU-3010 BU-3844* 38K-65K
STRU-3011 HU-3844* 38K-65K
STRU-3012 SBU-3844* 38K-65K
STRU-3013 SBU-3844-75* 38K-65K
STRU-3014 SHU-3844* 38K-65K
STRU-3015 SU-3844* 38K-65K
STRU-3016 LMU-4044* 44K-80K
STRU-3017 MU-4044* 38K-65K
STRU-3018 SMU-4044* 38K-65K
ZF Uni-Rod Full Ball Three Piece Kits
Part NumberReference Part Number
SuspensionRating (lbs.) DescriptionAutomann Automann
Dayton DaytonPartsFlagg Flagg
TMR058 345-814 TR17
TMR008 345-817 TR3
TMR060 345-811 TR18
TMR061 345-812
TMR010 345-807 TR4
TMR006 345-803 TR2
TMR054 345-809 TR15
TMR012 345-818 TR5
TMR014 345-804 TR6
Standard Stud (Hendrickson) Both Ends (1 1/4”-12 Threads).
Standard Hollow Ball, Both Ends (1 1/8” Dia. Hole).
Standard Ball Stud (Hendrickson) One End (1 1/4”-12 Thread). Standard Straddle Ball, Other End.
Standard Ball Stud (Hendrickson) One End (1 1/4”-12 Thread). Straddle Ball, Other End (For 3/4” Dia. Mounting Bolts). Standard Straddle Ball, One End. Standard Hollow Ball, Other End (1 1/8” Dia. Hole).
Standard Straddle Ball, Both Ends. Also Used As A Track Bar (2 3/8” Ball).
Ball Stud, One End(1 1/4”-12 Thread). Straddle Ball, Other End (For 7/8” Mounting Bolts). Mack Suspension Only. Ball Stud, Both Ends(1 1/4”-12 Thread). Mack Suspension Only.
Ball Stud, One End (1 1/4”-12 Thread). Standard Straddle Ball, Other End. Mack Suspension Only.
TMR044 345-819 TR10
TMR046 345-820 TR11
TMR050 345-801 TR13
TMR062 345-821 TR19
TMR048 345-810 TR12
TMR020 345-802 TR9
TMR056 345-805 TR16
TMR016 345-808 TR7
TMR018 345-806 TR8
Note:WhereMackSuspensionOnly”isspecified,themountingballstudtaperdiffersfromnormalindustrystandards.
The Universal Group, LLC
H-66610-000 Straddle 4 3/8” H-47691-000 5/8” TMRN610 345-610
H-66766-000 Straddle 4 3/8” H-67746-000 7/8” TMRN766 345-612
H-66767-000 Straddle 5 3/8” H-69210-000 3/4” TMRN767 345-613
H-66640-000 Straddle 5 11/16” H-66734-000 3/4” TMRN640 345-640
H-66650-000 Straddle H-65477-000 1 1/8” TMRN650 345-650
H-66660-000 Straddle 4 3/8” 35” H-47691-000 5/8” TMRN660 345-660
H-66661-000 Straddle 4 3/8” 27” H-47691-000 5/8” TMRN661 345-661
H-66768-000 Straddle 5 11/16” 27” H-66734-000 3/4” TMRN768 -
H-67047-000 Straddle 4 3/8” 27” H-69210-000 3/4” TMRN047 345-614
H-67048-000 Straddle 4 3/8” 27” H-67746-000 7/8” TMRN048 345-668
H-66620-000 Tapered 2” x 1 1/8” H-64809-000 TMRN620 345-620
H-66769-000 Tapered 1 7/8” x 1 1/4” H-66735-000 TMRN769 345-769
H-66630-000 Tapered 3” x 1 1/4” H-64697-000 TMRN630 345-630
Hendrickson Ultra Rod Two Piece Torque Rods - Spacer Ends
Part Number
Part Number
Part Number
End Type
End Type
End Type
MountingCenter “B”
MountingCenter “B”
“D” x “E”Thread
ReplacementBushing
ReplacementBushing
LengthC to C
ReplacementBushing
HoleDiameter
HoleDiameter
Automann
Automann
Automann
DaytonParts
DaytonParts
DaytonParts
B
B
B
B
D
E
Hendrickson Ultra Rod Two Piece Torque Rods - Tube Ends
H-66660-000 Straddle 4 3/8” 35” H-47691-000 5/8” TMRN660 345-660
H-66661-000 Straddle 4 3/8” 27” H-47691-000 5/8” TMRN661 345-661
H-66768-000 Straddle 5 11/16” 27” H-66734-000 3/4” TMRN768 -
H-67047-000 Straddle 4 3/8” 27” H-69210-000 3/4” TMRN047 345-614
H-67048-000 Straddle 4 3/8” 27” H-67746-000 7/8” TMRN048 345-668
H-66620-000 Tapered 2” x 1 1/8” H-64809-000 TMRN620 345-620
H-66769-000 Tapered 1 7/8” x 1 1/4” H-66735-000 TMRN769 345-769
H-66630-000 Tapered 3” x 1 1/4” H-64697-000 TMRN630 345-630
Hendrickson Ultra Rod Two Piece Torque Rods - Spacer Ends
End Type
End Type
End Type
DaytonParts
DaytonParts
H-66690-000 Mack Tapered 1 7/8” x 1 1/4” 35” H-66735-000 TMRN690 345-690
H-66691-000 Mack Tapered 1 7/8” x 1 1/4” 27” H-66735-000 TMRN691 345-691
H-66670-000 Tapered 2” x 1 1/8” 35” H-64809-000 TMRN670 345-670
H-66671-000 Tapered 2” x 1 1/8” 27” H-64809-000 TMRN671 345-671
H-66680-000 Tapered 3” x 1 1/4” 35” H-64697-000 TMRN680 345-680
H-66681-000 Tapered 3” x 1 1/4” 27” H-64697-000 TMRN681 345-681
H-66700-000 Tapered 35” H-65477-000 TMRN700 345-700
H-66701-000 Tapered 27” H-65477-000 TMRN701 345-701
Part Number End Type“D” to “E”Thread
ReplacementBushing
LengthC to C Automann
DaytonParts
H-64473-000 Blank TMRU8 345-473
H-46610-001 Straddle 4 3/8” H-64400-002 5/8” TMRU610 345-610HD
H-64474-000 Blank TMRU30-1-2 345-474
H-46661-001 Straddle 4 3/8” H-64400-002 5/8” TMRU661 345-661HD
H-46681-001 Tapered 3” x 1 1/4” H-46681-001 TMRU681 345-681HD
Hendrickson Ultra Rod Plus Two Piece Torque Rods - Tube Ends
Hendrickson Ultra Rod Plus Two Piece Torque Rods - Spacer Ends
Part Number
Part Number
Part Number
End Type
End Type
End Type
MountingCenter “B”
ReplacementBonded Bushing
ReplacementBonded Bushing
ReplacementBonded Bushing
MountingCenter “B”
“D” x “E”Thread
HoleDiameter
HoleDiameter
HoleDiameter
Automann
Automann
Automann
DaytonParts
DaytonParts
DaytonParts
D
E
D
E
B
ED
The Universal Group, LLC
B
B
D
E
No. TR 003 04-18 “THE UNIVERSAL GROUP, LLC , “THE UNIVERSAL GROUP” , “UNIVERSAL GROUP” , “U” Design, Globe Design, and “U” and Globe Design are trademarks of The Universal Group, LLC Pennsauken, New Jersey.
© 2018 The Universal Group, LLC All Rights Reserved
SOT-53663713
Universal Group®
www.theuniversalgroup.com