toro

TORO 6 TECHNICAL SPECIFICATION L05006-1 1/3

SANDVIK TAMROCK reserves the right to change this specification without further notice

ISO 9001

CERTIFICATEDFIRM

ISO 14001

CERTIFICATEDFIRM

SANDVIK TAMROCK Corp., P.O. Box 434 FIN-20101 Turku, Finland

Tel. +358 20544131 Fax. +358 20544130

e-mail: [email protected] Internet: www.toro.sandvik.com

qlol=S



ISO 9001

CERTIFICATEDFIRM

ISO 14001

CERTIFICATEDFIRM


Tel. +358 20544131 Fax. +358 20544130


Main dimensions Total length 8608 mm (339") Width without bucket 2130 mm (84") Maximum width 2230 mm (88) Height without safety canopy 1720 mm (68) Height with safety canopy 2 200 mm (87") Weights Operating weight 18 020 19 600 kg

(39 730 43 210 lb) Total loaded weight 24 720 31 400kg

(54 500 69 220lb) Shipping weight 17 950 19 550 kg

(39 570 43 100 lb) Axle weights without load: Front axle 7 950 kg (17 500 lb) Rear axle 10 070 kg (22 200 lb) Axle weights with load: Front axle 18 050 kg (39 800 lb) Rear axle 6 670 kg (14 700lb) Capacities Tramming capacity 6700 kg (14 800 lb) Breakout force, lift 134 kN (13 700 kg) (30 200 lb) Breakout force, tilt 112 kN (11 400 kg) (25 100 lb) Tipping load (straigth) 16 070 kg (35 430 lb) Bucket std. 3,0 m (3.9yd), HB500/400 Bucket motion times Raising time 6,5 sec. Lowering time 3,8 sec. Tipping time 2,0 sec. Driving speeds forward and reverse 1st gear 4,8 km/h (2.9 mph) 2nd gear 9,5 km/h (5.9 mph) 3rd gear 16 km/h (10.0 mph) 4th gear 26 km/h (16.2 mph) Frame Rear and front frame Welded steel construction Material Raex Multisteel N (St/Fe 355) Central hinge Fully sealed, adjustable upper bearing Material Raex Multisteel N (St/Fe 355) Standard engine Diesel engine Mercedes Benz OM 906 LA Output 150 kW / 2200 r/min (201 hp) Torque 750 Nm 1400 r/min Number of cylinders Inline 6 Displacement 6 400 cm Cooling system Water cooled Combustion principle Direct injection, four stroke Electric system 24V Air filtering Donaldson Exhaust system Exhaust pipes, catalytic purifier and

muffler Fuel tank capacity 210 l (55 gal.) Cooling Hydraulic fan drive Standard converter Dana, C 273.1 Gearbox Dana, R 32421 power shift transmission with modulation,

four gears forward and reverse, automatic gear control

Standard axles Front axle Dana, 37RM 116 Posi-Stop

with Posi-Torq w/o spring, fixed Rear axle Dana, 37RM 116, Posi-Stop, No-spin,

oscillating 8. Standard tyres Size and type 17.5x25 L5S, Bridgestone (brand and

type of the tyres subject to availability) Air pressure, front 575 kPa (5,75 bar) (82 psi) Air pressure, rear 450 kPa (4,5 bar) (65 psi) Other type of tyres available to users choice. In certain applications the productive capabilities of the loader may exceed the TKPH value given by tyre manufacturer. Sandvik Tamrock recommend that the user consult their tyre supplier to evaluate conditions and to find the best solution for application. Operators compartment ROPS/FOPS certified canopy

Width 2130 mm (84) Height 2200 mm (87)

Steering hydraulics Centre-point articulation, power steering with two double acting cylinders. Steering system is equipped with electric controlled joystick. Emergency steering is optional. Turning angle 42,5 Turning radius (with std bucket):

inner 3030 mm (119") outer 5800 mm (228")

Main components in steering system: Main valve Rexroth Pilot control valve Rexroth Steering cylinders 100 mm (3.9"), Tamrock Steering and pilot hydraulic pumps gear type,

Parker Pressure settings:

Steering hydraulics, main relief valve 22,0 MPa(220bar) Shock load valves 12,5 MPa(125bar)

Bucket hydraulics Monostick bucket and boom control (electric) equipped with gear pump that delivers oil to the bucket hydraulic main valve. The oil flow from steering hydraulic pump is directed to bucket hydraulics when steering is not used. Main components:

Lift cylinders (2 pcs) 140 mm (5.5"), Tamrock Tilt cylinder 200 mm (7.9"), Tamrock Pilot control valve Rexroth Main valve Rexroth Pump for bucket hydraulics gear type, Parker Fittings ORFS Hosing High temperature Hydraulic oil tank capacity appr. 230 l (61.8 gal) Oil cooler for transmission & hydraulics

Oiltech

Lift arm safety lock (CEN). Pressure setting for:

Pilot circuit 3.5 Mpa (35 bar) Bucket hydraulics 21.0 Mpa (210 bar) Shock load valves 25.0 Mpa (250 bar)



ISO 9001

CERTIFICATEDFIRM

ISO 14001

CERTIFICATEDFIRM


Tel. +358 20544131 Fax. +358 20544130


Standard brakes Service brakes are spring applied, hydraulically released multidisc wet brakes (Posi-Stop) on all wheels, two separate circuits: one for the front and one for the rear axle. Service brakes also function as an emergency and parking brake. Electrically driven pump for brake realeasing. Automatic brake activation, ABA. Main components in the brake system:

Pressure accumulator, piston type

Hydroll

Brake pedal valve Mico Charging valve Parker

Standard Lubrication system Centralized manual lubrication Electrical equipment Alternator 24 V 100 A, Bosch Batteries 2 x 12 V, 145 Ah Starter 24 V, Bosch Driving lights 2 pcs in front,

65 W Nordic lights 2 pcs in rear,

65 W Nordic lights 2 pcs in canopy,

65 W Nordic lights Parking lights 2 pcs in front, LED lights 2 pcs in rear (5 W) Control system 5,7 display, 3 modules, inbuild system

diagnostics Others Decal language EU-languages Standard manuals Instructions manual (1pc)

- General mandatory safety instructions EU-languages - Start up of a new machine English - Operators manual EU-languages

- Maintenance manual EU-languages Spare part manual (1pc) English Workshop manual (1pc) English ToolMan CD (2pcs) Manuals in pdf form

- General mandatory safety instructions - Operators manual

- Maintenance manual - Spare part manual

Main options: * replaces standard equipment * Bucket size 2,7 m3 (3.5 yd3), width 1900 mm (75),

HB500/400. * Bucket size 3,3 m3 (4.3yd3), width 2100 mm (83),

HB500/400. * Bucket size 3,7 m3 (4.8yd3), width 2100 mm (83),

HB500/400 * Ejector bucket, 3.0 m3 (4.0yd3), width 2100 mm (83),

HB500/400. * Safety cabin, ROPS/FOPS, height 2250 mm, A/C, el.

steering & bucket contr. * Automatic central lubrication. * cassette player, replace CD-player from cabin models Emergency steering (CEN). Fire suppression system ANSUL, 6 nozzles (CEN). Auto engine shut down, ANSUL. Fire extinguisher 12kg. RRC TORO HBC, complete RRC TORO Cattron, complete radio remote control interface (TORO HBC) radio remote control interface (TORO Cattron) RRC recovery kit, hook included Accordance with CE-norms (CEN). Disassembly needed shaft dim: TBA CatBase/LinkOne spare part manuals and additional

Instructions, Workshop, Spare part manuals, ToolMan CDs are available.

Lockable main switch reverse alarm (CEN) Led beacon (CEN with RRC) Wiggins fluid fill set (hydr., transmission and engine oil) Wiggins fuel fill system

Documents

toro