Top quality orthodontic products for every age and all … quality orthodontic products for every age and all techniques Customer number: Please insert your Dentaurum customer number

orthodontics 2008/ 2009 en

Orthodontics 2008/ 2009Top quality orthodontic products for every age and all techniques

Customer number:

Please insert your Dentaurum customer number. For faster service, we kindly ask you to use your customer number when ordering.

3

Dear Customer

If we think of recent discussions, it is difficult not to get the impression that today everything depends on the price alone. This would be quite dangerous in the health field, even with today‘s requirements to work economically. We consider the price-performance ratio much more important, particularly when considering the complete ser-vice offered by the supplier, not just the supply of the product. What use is a cheap product if it is compromised by poor quality, poor advice or poor service? The money saved on the product is more than used up by added time or money spent elsewhere.

In Germany higher quality services have been and are increasingly being provided outside the reimbursement by health insurance funds to the benefit of patients. In other countries where the patient participates in financing orthodontic treatment to a much greater degree the question of ”What do I get for my money?“ is even more important.

The polar division of the market into cheap, product-focused services and demanding state-of-the-art products with comprehensive services is becoming increasingly evident. For this reason we have aligned our products and services in orthodontics to these developments.

We have genuinely innovative product concepts such as tomas®, magic® or equilibrium® mini on the one hand and on the other hand outstanding services such as the o-atlas or the ”Skeletal Anchorage“ illustrated atlas along with a competent team of specialists available to support you with advice and consultation at any time.

For more than 120 years the name Dentaurum has stood for above-average quality, dental competence and relia-bility. This tradition is both opportunity and obligation for us, because only change is continuous with the slogan: the better is the enemy of the good.

You will find many new and improved products when you examine the new orthodontic catalogue; products that add value for reasonable terms for the benefit of users and patients.

We would particularly like to draw your attention to the comprehensive and up-to-date information at www.dentaurum.de, and the variety of courses available, which have always been very highly rated by participants, particularly for the anniversary year of ”10 Years of CDC“.

Dentaurum – a good feeling!

We look forward to receiving your orders, and as always we will respond to them with our usual speed and reliability.

We also look forward to receiving your praise and criticism to help us improve even more.

Best regards from Ispringen

Mark Stephen Pace Axel Winkelstroeter

CEO Dentaurum Group CEO Dentaurum Group

4

Core: Competence

Dental TechnologyFrom the root up to the crown

The Dentaurum Group develops, manufactures and markets products for dentists and dental techni-cians all over the world.

The Dentaurum Group, based in Ispringen (near Pforzheim), has been in the dental business as an owner-managed family for more than 120 years. This makes Dentaurum the oldest dental company in the world.

With an unusually broad and deep range of dental products and services Dentaurum has made an outstanding name for itself in implant dentistry (Dentaurum Implants), dental prosthetics, orthodontics and dental ceramics. The resulting expertise and synergy potential means that our product systems are optimally designed for the requirements of the practitioner. Whether you are interested in innovative implants, high-quality castings, dental ceramics or brackets of advanced materials - the name Dentaurum stands for innovative and reliable products for dentists, orthodontists and dental technicians.

Quality has always been very important for the Dentaurum Group. The company has invested and continues to invest in quality assurance at all levels and in all divisions to ensure that customers can always rely on our high-quality products. As part of the effort to improve quality Dentaurum was one of the first companies in the dental industry to be certified under the requirements of the Medical Devices Directive (CE mark) and the EC Eco Audit regulation. The “Centre for Dental Communication” was the very first certified continuing dental education centre in Germany.

Innovative products, reliable quality and comprehensive services are the characteristics of the Dentaurum Group for the benefit of customers and ultimately for the welfare of patients.

Competence

Quality

Service

Innovation

5

How to contact us directly (Germany)

Telephone ................................................................................................................................ + 49 72 31 / 803-0

Fax .........................................................................................................................................+ 49 72 31 / 803-295

E-Mail ................................................................................................................................... [email protected]

How to contact us directly (Canada)

Telephone ................................................................................................................................ + 1 514-592-6255

Fax ............................................................................................................................................+ 1 888-771-3640

E-Mail ............................................................................................................................ [email protected]

How to contact us directly (Australia)

Telephone .................................................................................................................................+ 61 2 97 43 48 11

Fax ............................................................................................................................................ + 61 2 97 43 45 99

E-Mail ............................................................................................................................ [email protected]

How to contact us directly (Belgium)

Telephone ............................................................................................................................. + 32.(0)3/707.23.20

Fax ......................................................................................................................................... + 32.(0)3/707.23.21

E-Mail ................................................................................................................................... [email protected]

6

Titanium is highly corrosion resistant. Titanium does not corrode. A protective layer known

as the passivity layer prevents titanium from oxida-tion. This is also referred to as „chemically inert”.

Titanium is biocompatible. Titanium does not release ions into the surrounding

tissues. No pathological reactions are triggered in the body.

Titanium is the most biocompatible

metal. It has proven to be highly effective in human and

dental medicine.

Titanium offers multiple applications. The requirement of only using a single metal in the

mouth is achieved with titanium because of the many applications.

Titanium is neutral in taste. The passivated surface of titanium prevents reactions

with saliva, food and drink. No metallic taste exists unlike with many alloys.

Titanium allows laser welding. Titanium is excellent for laser welding therefore,

soldering can be avoided.

7

equilibrium® ti The only brackets in pure titanium equilibrium® ti brackets have the same functional advantages as equilibrium® 2 with the additional advantage of

pure titanium. The result is excellent biocompatibility, extraordinary strength and effective treatment. Take advantage of the leading manufacturer’s know-how and unbeatable cost effectiveness! Available in Roth 18 and Roth 22 and McLaughlin-Bennett-Trevisi* 18 / 22.

* The Dentaurum version of this prescription is not claimed to be a duplication of any other, nor does Dentaurum imply that it is endorsed in any way by Drs. McLaughlin, Bennett and Trevisi.

rematitan® Buccal Tubes The only molar tubes in pure titanium Titanium is the most biocompatible of all metals used in dentistry. Titanium is mechanically extremely strong and neutral

in taste which makes it ideal for use in orthodontics. These material qualities are complemented by the patented laser structured bonding base.

rematitan® Expansion Screws High stability – perfect biocompatibility Titanium expansion screws exhibit not only excellent biocompatibility but also exceptionally high stability and high

corrosion resistance. These features make them the first choice in expansion screws with regard to functional and biological aspects.

Titanium Hyrax® Maxi - 12 The world’s first expansion screw in pure titanium Apart from the Titanium Hyrax® Maxi - 12 expansion screw’s perfect design it also has unbeatable biocompatibility. This is due

to the fact that it is made of pure titanium which can be used for treatments with especially sensitive patients. The functional highlights of this innovative product are:

The built-in screw lock to prevent unwanted „turning back“

The built-in screw stop to prevent the screw from coming apart once maximum expansion has been obtained

Excellent thread strength which creates high stability

Titanium direct bond pads Anatomically contoured The titanium bonding bases are laser structured for the direct bond technique, specifically for the direct bonding of RPE

appliances in conjunction with the Titanium Hyrax® Maxi - 12.

Titanium lingual retainer Biocompatible Titanium lingual retainers are available in two variants:

The pre-fabricated bondable two point retainers are a manufactured one piece construction. The structure of the base is laser etched which improves retention and dramatically reduces bond failures.

Co-axial wires provide good stability especially for the anterior teeth, and can be easily adapted to the lingual contour of the arch by the clinician. This method is popular with patients.

rematitan® wires For laser welded joinings Recommended as additional material for laser welding, such as removable appliances (Titanium Hyrax® Maxi - 12).

tomas® - Anchorage System ................................................................ 10 – 23tomas® - Anchorage System ..................................................................................................................... 18 – 22Consultation Support ....................................................................................................................................... 23tomas® - auxiliary kit ..................................................................................................................................... i – vi

magic® - Lingual System ......................................................................... 24 – 41magic® - Lingual Brackets and Tubes ........................................................................................................ 30 – 31magic® - Arches ....................................................................................................................................... 32 – 35magic® - Instruments........................................................................................................................................ 36magic® - LinguSet .................................................................................................................................... 37 – 39magic® - Accessories ................................................................................................................................ 40 – 41Consultation Support ....................................................................................................................................... 41

Brackets ........................................................................................................... 42 – 107Metal Brackets*Assortments ............................................................................................................................................. 57 – 78Single Packs ............................................................................................................................................. 79 – 81Banding Technique .................................................................................................................................. 82 – 83Ceramic BracketsFascination® ............................................................................................................................................. 88 – 90Fascination® 2 .......................................................................................................................................... 91 – 92Jewels ...................................................................................................................................................... 93 – 95Plastic BracketsElegance® ............................................................................................................................................. 98 – 100Bracket Accessories ........................................................................................................................... 102 – 105Consultation Support ....................................................................................................................... 106 – 107* a detailed overview of products can be found on page 42

Buccal Tubes ............................................................................................... 108 – 131For the Banding Technique .................................................................................................................. 112 – 121Preweld - Lingual Attachments ............................................................................................................ 122 – 123For the Bonding Technique .................................................................................................................. 124 – 129Nickel free** Tubes ........................................................................................................................................ 130Titanium Tubes .............................................................................................................................................. 131** acc. to ISO 6871-1 (1994)

Bands ............................................................................................................... 132 – 165Dentaform® Snap Bands · welded and unwelded ................................................................................. 138 – 143Dentaform® Bands · welded and unwelded .......................................................................................... 144 – 154Standard Bands · welded and unwelded .............................................................................................. 155 – 164Accessories .................................................................................................................................................... 165

Adhesives ..................................................................................................... 166 – 179Adhesives and Accessories ................................................................................................................... 172 – 179

Wires · Arches · Accessories............................................................. 180 – 251Fixed Appliance Technique ................................................................................................................... 198 – 238Removable Appliance Technique .......................................................................................................... 240 – 249Palatal and Lingual Arch Systems ......................................................................................................... 250 – 251

8

Product range / Overview

Intra- and Extraoral ............................................................................... 252 – 283

Extraoral Appliances ............................................................................................................................ 260 – 267Elastic Auxiliaries .................................................................................................................................. 268 – 272Oral Screens................................................................................................................................................... 273OrthoSafe Sports Guard ................................................................................................................................. 274SUS2 – Sabbagh Universal Spring ......................................................................................................... 275 – 276Herbst® Bite Jumping Hinges ................................................................................................................ 277 – 280Accessories .......................................................................................................................................... 281 – 283

Supplies ........................................................................................................ . 284 – 293Impression Material.............................................................................................................................. 288 – 290Laboratory Accessories ......................................................................................................................... 291 – 292Miscellaneous ................................................................................................................................................ 292

Expansion Screws ................................................................................... 294 – 315Standard Expansion Screws .................................................................................................................. 298 – 299Special Screws ..................................................................................................................................... 300 – 310Accessories .......................................................................................................................................... 311 – 314

Orthodontic Acrylics ............................................................................. 316 – 335Orthodontic Acrylics ............................................................................................................................ 320 – 324Accessories .......................................................................................................................................... 325 – 335

Pliers · Instruments ................................................................................ 336 – 367Premium-Line Pliers .............................................................................................................................. 342 – 350EQ-Line Pliers ....................................................................................................................................... 351 – 354Pliers .............................................................................................................................................................. 355Instruments .......................................................................................................................................... 356 – 361Diagnostic ............................................................................................................................................ 362 – 364Accessories .......................................................................................................................................... 365 – 366

Equipment ................................................................................................... 368 – 383Equipment and Accessories .................................................................................................................. 374 – 382

Dynamics of Orthodontics, o-atlas ............................................. 384 – 391Dynamics of Orthodontics – Product range .......................................................................................... 388 – 391o-atlas – The unique reference for removable appliances ..................................................................... 392 – 393

Courses ......................................................................................................... 394 – 395

Service ............................................................................................................ 396 – 482 Bracket Systems – Information ............................................................................................................. 398 – 399Preweld Service – Banding Technique ................................................................................................... 400 – 421Band Conversion Chart ........................................................................................................................ 422 – 429Wire Information ................................................................................................................................. 430 – 431List of Materials ................................................................................................................................... 432 – 435Conversion Tables .......................................................................................................................................... 436Care of Instruments ....................................................................................................................................... 437Logistics and environment ................................................................................................................... 438 – 442Symbols and Pictograms ................................................................................................................................ 443Numerical Index ................................................................................................................................... 444 – 461Alphabetical Index ............................................................................................................................... 462 – 466Notes ................................................................................................................................................... 467 – 482

9

Product range / Overview

10

tomas® - Anchorage System

tomas® - Anchorage System ............................................................................................................ Page 18Consultation Support ...................................................................................................................... Page 23tomas®-auxiliary kit ......................................................................................................................... Page i

Unique treatment conceptThe complete anchorage system from Dentaurum

tomas® – Anchorage System

magic® – Lingual System

Brackets

Buccal Tubes

Bands

Adhesives

Wires · Arches · Accessories

Intra- and Extraoral

Supplies

Expansion Screws

Orthodontic Acrylics

Pliers · Instruments

Equipment

Dynamics of Orthodontics, o-atlas

Courses

Service

11


The complete anchorage system from Dentaurum

Innovative undercutUniquely simple and ligature-free fixation of the orthodontic appliance with light-curing adhesivePatent: DE 101 32 088

Slot mark4 slot marks ensure optimum identification of the slot position

GingiFit©

Polished, conical collar for perfect gingival adaptation without the risk of compression – the perfect prophylaxis against inflammation

Depth stopMaximum safety because the planned insertion depth cannot be exceeded

Ortho-DesignCross slot pin head designed like a bracket for standard orthodontic techniques

Super surface finishSpecial surface conditioning guarantees easy removal at the end of treatment

Different threadsAvailable in a self-drilling or self-tapping version – sterile

NEW

3 lengthsNow also available in 6 mm length

NEW

NEW

12


pin designed by Prof. Dr. Bumann

13


tomas® (temporary orthodontic micro anchorage system) is a new concept for temporary skeletal anchorage during orthodontic treatment, such as for active tooth movements or passive stabilisation.

The special design, the complete range of products and the comprehensive service make tomas® the contemporary premium system without argument. tomas® is the first complete range of products that includes sterile miniscrews from the start.

The advantages of the tomas® concept at a glance: enables more effective and simpler orthodontic treatment*

can replace treatment with headgear*

concept retains teeth, extraction can be avoided

only requires partial banding*

optimises time and material usage

high acceptance by patients

invisible treatment

* depending on the initial situation and the type of treatment

tomas® components The tomas® product range has everything necessary for successful insertion, and the number of com-ponents is still manageable:

tomas® pins in various lengths

a complete range of drills

instruments for manual and machine insertion

The most complete service programme available now is as the disposal of users, including a well-informed hotline, interesting courses, detailed instructions for use and up-to-date information on the internet.

Additional recommended products ConTec LC (REF 163-510-00) – for ligature-free connection between connecting wire and the

tomas® pin

remanium® rod wire – connecting wire between the tomas® pin and the orthodontic appliance

cross tube (REF 480-100-00 or 480-000-00) – for connection between connecting wire and bow

sliding/clamping tube, rectangular (REF 480-619-00 and 480-620-00) – eg for attaching springs to bow

rematitan® “LITE” tension springs (REF 758-160-00 and 758-161-00) – for active tooth movements such as mesialisation of teeth

rematitan® “LITE” compression springs (REF 758-360-00, 758-161-00 and 758-362-00) – for active tooth movements such as distalisation of teeth

stop tubes, slotted (REF 480-617-00 and 480-618-00) – for renewed activation of springs without changing the bow

The tomas® concept

tomas® Indications

The tomas® pin is used as a temporary skeletal anchorage during orthodontic treat-ment. The various indications can be classified into three groups depending on the goal of the treatment:

Active tooth movement

Passive stabilization

Preprosthetic treatment

The secure function of the tomas® pin requires a fixed anchorage in the bone (primary stability) and placement of the head in the region of the alveolar gingiva. The tomas® pin can be inserted in the maxilla facially, palatally or on the alveolar ridge. It should be inserted in the mandible facially and in the centre of the alveolar ridge.

Insertion on the lingual side of the mandible and in the vicinity of extraction wounds, dental follicles and first teeth is not recommended.

14


Active tooth movement

The tomas®-pin is used in orthodontic treatment as anchorage for numerous active tooth movement techniques. In some cases movement can be achieved which was previously impossible or only with considerable loss of anchorage.

The tomas®-pin can be used as reliable anchorage for the following active tooth movement techniques:

Distalization of molars in the mandible and maxilla

Mesialization of individual teeth or entire tooth groups

”En-masse” retraction

Sliding mechanics in Class II

Asymmetric Class II

Space closure in Class I occlusion

Asymmetric occlusal plane

15


tomas® Indications

Passive stabilization

The tomas®-pin can be used to prevent the movement of individual teeth or entire tooth groups. If the position of the teeth is not to be changed, they can be easily and gently stabilized by connecting them to tomas®-pins. Time-consuming adjust-ments due to anchorage loss, often necessary after completion of treatment, is no longer required.

The tomas®-pin can be used as a stabilizing unit with the following treatment options:

Appliances for correction of Class II, e.g. Herbst® appliance or Sabbagh Universal Spring (SUS2), for example to prevent protrusion of the incisors

Lingual technique

Anchorage in dentitions with a reduced number of teeth (oligodontia)

16


Preprosthetic treatment

The use of tomas®-pins greatly expands the potential of orthodontic treatment in preparation for a prosthetic restoration.

Teeth can be moved into the correct position for a prosthetic restoration with very little effort and in most cases the pins are not visible.

The most frequent preprosthetic applications are:

Uprighting of molars, particularly in the mandible

Mesialization / distalization

Space closure / creating space

Intrusion of teeth

Alignment of wisdom teeth

17


18

tomas®-set (starter-set)Skeletal anchorage for orthodontic tooth movement The tomas®-set contains all components of the system and is recommended to start out in this technique. Contents of Assortment: · 4 x tomas®-pin 08, REF 302-008-00· 4 x tomas®-punch (gingiva-remover),

REF 302-001-00· 1 x tomas®-tray, REF 302-005-00· 5 x tomas®-locator (positioner),

REF 302-002-00· 1 x tomas®-round drill 1.0 (round bur),

REF 302-003-00· 1 x tomas®-drill 1.1, pilot drill (pilot bur),

REF 302-003-11· 1 x tomas®-drill 1.2, pilot drill (standard

pilot bur), REF 302-003-12· 1 x tomas®-applicator, REF 302-004-20· 1 x tomas®-wheel ø 10 mm (nut),

REF 302-004-30· 1 x tomas®-torque ratchet,

REF 302-004-40· 1 x tomas®-driver (mechanical screwing

aid), REF 302-004-50· 1 x tomas®-model, REF 302-006-00· 1 x instructions for use

302-000-00 1 Set


tomas®-basic setThe tomas® basic set contains just the components required to insert a tomas® pin. Contents of Assortment: · 2 x tomas®-punch (gingiva-remover),

REF 302-001-00· 1 x tomas®-drill 1.1 T8, pilot drill (pilot

bur), REF 302-003-08· 1 x tomas®-applicator, REF 302-004-20· 1 x tomas®-wheel ø 10 mm (nut),

REF 302-004-30· 2 x tomas®-pin N 08, REF 302-008-10· 1 x tomas®-tray basic, REF 302-105-00

302-100-00 1 Set

tomas®-pin 06 selftappingsterile packagingThread length: 6 mm ø 1.6 mm

Color coded packaging: yellow

302-006-11 1 piece

tomas®-pin 08 selftappingsterile packagingThread length: 8 mm ø 1.6 mm

Color coded packaging: blue

302-008-00 1 piece

19


tomas®-pin N 10 selftappingnonsterileThread length: 10 mmø 1.6 mm

Color coded packaging: green

302-010-10 1 piece

302-010-30 10 pieces



302-008-10 1 piece

302-008-30 10 pieces



302-006-10 1 piece

302-006-30 10 pieces

tomas®-punch (gingiva-remover)sterile packagingFor perforating the soft tissue at the inserti-on area prior to insertion of the tomas®-pin.ø 2 mm

302-001-00 4 pieces

tomas®-X marker (X-Raying Guide)SterilizablePositioning guide to find the correct area of insertion for the tomas®-pin.

302-004-19 1 piece

tomas®-round drill 1.0 (round bur)SterilizableUsed as a drill start in the bone prior to the pilot drill.

302-003-00 1 piece

tomas®-drill 1.0, pilot drill (pilot bur)SterilizableFor pilot drilling in the maxilla only. The drilling must be undertaken at 800 rpm (max. 1500 rpm) with a sterile, cooled physiological saline solution in the maxilla only.Not included in set.Length: 10 mmø 1.0 mm

Color coded packaging: red

302-003-10 1 piece

tomas®-pin 10 selftappingsterile packagingThread length: 10 mmø 1.6 mm


302-010-00 1 piece

20


tomas®-drill 1.1 T8, pilot drill (pilot bur)Sterilizable For pilot drilling. The drilling must be under-taken at 800 rpm (max. 1500 rpm) with a sterile, cooled physiological saline solution.Not included in set.Length: 8 mm ø 1.1 mm


302-003-08 1 piece

tomas®-drill 1.2, pilot drill (standard pilot bur)Sterilizable For pilot drilling. The drilling must be under-taken at 800 rpm (max. 1500 rpm) with a sterile, cooled physiological saline solution.Length: 10 mm ø 1.2 mmColor coded packaging: yellow

302-003-12 1 piece

tomas®-applicatorSterilizable For manual tomas®-pin insertion.Color coded packaging: yellow

302-004-20 1 piece

tomas®-wheel (nut)Sterilizable To be used with the tomas®-applicator (REF 302-004-20) for the manual insertion of the tomas®-pin.ø 10 mm

302-004-30 1 piece

tomas®-torque ratchetSterilizable To be used with the tomas®-applicator (REF 302-004-20) for the manual insertion of the tomas®-pin. The ratchet is to be set not higher than 20 Ncm.

302-004-40 1 piece

tomas®-drill 1.1, pilot drill (pilot bur)Sterilizable For pilot drilling. The drilling must be under-taken at 800 rpm (max. 1500 rpm) with a sterile, cooled physiological saline solution.Length: 10 mm ø 1.1 mm


302-003-11 1 piece

21

tomas®-driver Sterilizable For mechanical insertion of the tomas®-pin with the aid of a lockable torque instrument. The setting should be limited to 20 Ncm and the rpm to a maximum of 25.Color coded packaging: yellow

302-004-50 1 piece


tomas®-traySterilizable 302-005-00 1 piece

tomas®-tray basicSterilizable Stainless steel box for storage of tomas® components.

302-105-00 1 piece

tomas®-modelFor patient demonstration. 302-006-00 1 piece

22


tomas®-drill SD selfdrillingSterilizable For perforation of the compact bone when using self-drilling tomas® pins. The drilling must be undertaken at 800 rpm (max. 1500 rpm) with a sterile, cooled phy-siological saline solution.Not included in set.Length: 4.0 mm ø 1.1 mm


302-103-00 1 piece

tomas®-pin SD 08 selfdrillingsterile packagingThread length: 8 mm ø 1.6 mm


302-108-00 1 piece



302-110-00 1 piece



302-106-00 1 piece

tomas®-pin SD-N 08 selfdrillingnonsterileThread length: 8 mm ø 1.6 mm




302-108-10 1 piece

302-108-30 10 pieces



302-106-10 1 piece

302-106-30 10 pieces

302-110-10 1 piece

302-110-30 10 pieces

23

tomas® - demonstration pinFor patient demonstration.Ratio: 5 : 1

tomas® - Info-CD-ROMIncluding comprehensive case documentation and examples of use.Multilingual: German, English. French, Spanish, Italian

tomas® - Illustrated Atlas ”Skeletal Anchorage“ Part 140 diagrams of examples of use for the following indication groups:· active tooth movement· passive stabilisation· preprosthetic therapy© Dr. Benedict Wilmes

tomas® - Illustrated Atlas ”Skeletal Anchorage“ Part 2Virtual examples of use and case documen-tation for the following indication groups:· active tooth movement· passive stabilisation© Dentaurum J. P. Winkelstroeter KG

302-007-00 1 piece

903-944-60 1 piece

989-559-60 1 piece

989-568-60 1 piece


Consultation Support

i

tomas®-auxiliary kit 18 (Set of Accessories for the Slot 18 Technique)The tomas®-auxiliary kit contains accessories for mesializing, distalizing and uprighting of teeth in connection with the tomas® pin. Contents of Assortment: · 10 x tomas®-coil spring light,

REF 302-012-00· 10 x tomas®-coil spring medium,

REF 302-012-10· 10 x tomas®-coil spring heavy,

REF 302-012-20· 10 x tomas®-stop screw, REF 302-013-00· 10 x tomas®-cross tube 18, REF 302-014-18· 10 x tomas®-power arm square,

REF 302-015-00· 10 x tomas®-Nikodem spring 7,



REF 302-016-14· 10 x tomas®-uprighting spring,

REF 302-009-00· 10 x tomas®-hook, REF 302-009-10· 1 x tomas®-auxiliary box, REF 302-023-00

302-000-18 1 set


ii


tomas®-auxiliary kit 22 (Set of Accessories for the Slot 22 Technique)The tomas®-auxiliary kit contains accessories for mesializing, distalizing and uprighting of teeth in connection with the tomas® pin. Contents of Assortment: · 10 x tomas®-coil spring light,

REF 302-012-00· 10 x tomas®-coil spring medium,

REF 302-012-10· 10 x tomas®-coil spring heavy,

REF 302-012-20· 10 x tomas®-stop screw, REF 302-013-00· 10 x tomas®-cross tube 22, REF 302-014-22· 10 x tomas®-power arm square,




REF 302-016-14· 10 x tomas®-uprighting spring,

REF 302-009-00· 10 x tomas®-hook, REF 302-009-10· 1 x tomas®-auxiliary box, REF 302-023-00

302-000-22 1 set

tomas®-coil spring light

tomas®-coil spring medium

tomas®-coil spring heavy

Strength category: super elasticWith eyelets for easy engagement in the tomas®-pin and a hook.Inner ø 0.9 mm / 36 Wire ø 0.21 mm / 9 Length: 8 mm



302-012-00 10 pieces

302-012-10 10 pieces

302-012-20 10 pieces

iii


tomas®-stop screw

tomas®-cross tube 18

tomas®-cross tube 22

tomas®-power arm square

tomas®-Nikodem spring 7

Stop screwInner ø 1.15 mm / 45incl. 1 key for internal hexagon screwSize: 0.9

Transverse connection between two small rectangular tubes for joining two wires without welding or soldering. Ideal for con-necting the tomas® pin with the arch wire.Horizontal tube:Overall length, horizontal 4.0 mmInner F 0.46 x 0.64 mm / 18 x 25

Vertical tube:Overall length, vertical 2.0 mmInner F 0.56 x 0.70 mm / 22 x 28

Transverse connection between two small rectangular tubes for joining two wires without welding or soldering. Ideal for con-necting the tomas® pin with the arch wire.Horizontal tube:Overall length, horizontal 4.0 mmInner F 0.56 x 0.70 mm / 22 x 28Vertical tube:Overall length, vertical 2.0 mmInner F 0.56 x 0.70 mm / 22 x 28

Crimping tube, slotted, with spring hard rec-tangular wire (F 0.55 x 0.70 mm / 21.5 x 28). Can be placed directly on the arch wire and crimped in place. Universal application for the slot 18 / 22 technique.Ideal for coupling with the tomas® pin and for bending individual hooks.Tube length: 2.0 mmWire length: 25 mm

Super elastic NiTi spring acc. to Dr. Nikodem.Ideal for coupling with the tomas® pin.Length: 7 mmWire ø 0.25 mm / 10

302-013-00 10 pieces

302-014-18 10 pieces

302-014-22 10 pieces

302-015-00 10 pieces

302-016-07 10 pieces

iv




tomas®-uprighting spring

tomas®-hook

Super elastic NiTi spring acc. to Dr. Nikodem.Ideal for coupling with the tomas®-pin.Length: 11 mmWire ø 0.25 mm / 10

Super elastic NiTi spring acc. to Dr. Nikodem.Ideal for coupling with the tomas®-pin.Length: 14 mmWire ø 0.25 mm / 10

For uprighting and intrusion or extrusion of molars.

Addiaiotnal possibility for fixing elastic elements (plastic chains, springs) to the tomas® pin head.

302-016-11 10 pieces

302-016-14 10 pieces

302-009-00 10 pieces

302-009-10 10 pieces

v


tomas®-auxiliary box

tomas®-power chain

tomas®-power arm round

tomas®-crimp hook 4L

tomas®-crimp hook 4R

tomas®-slotted stops 18

With 2 inserts.

Constant tension with longer effectiveness. High elasticity with very good resiliency.Roll 3.5 mColor: transparentInner ø 1.3 mm

Crimping tube, slotted, with 0.7 mm spring hard wire. Can be placed directly on the arch wire and crimped in place. Universal application for the slot 18 / 22 technique. Ideal for coupling with the tomas® pin and for bending individual hooks.Tube length: 2.0 mmWire length: 25 mm

Crimping tube, slotted, with 4 hooks to engage springs and plastic chains. Universal application for the slot 18 / 22 technique.

Crimping tube, slotted, with 4 hooks to engage springs and plastic chains. Universal application for the slot 18 / 22 technique.

Suitable as stop for compression springs.Dimensions: F 0.46 x 0.64 mm / 18 x 25

302-023-00 1 piece

302-018-00 1 piece

302-019-00 10 pieces

302-020-00 10 pieces

302-020-10 10 pieces

302-021-18 100 pieces

vi


tomas®-slotted stops 22

tomas®-compression spring

Suitable as stop for compression springs.Dimensions: F 0,56 x 0,70 mm / 22 x 28

Strength category: super elasticThese compression springs offer the following advantages:· High elasticity with virtually constant

restoring force· Fatigue-free, low, uniform transfer of

forcesMay be individually shortened.

Force: mediumInner ø 0.76 mm / 30Wire ø 0.30 mm / 12Length: 18 cm / 7”

302-021-22 100 pieces

302-022-00 1 piece

24

magic® - Lingual System

magic® - Lingual Brackets and Tubes .............................................................................................. Page 30magic® - Arches ................................................................................................................................ Page 32magic® - Instruments........................................................................................................................ Page 36magic® - LinguSet ............................................................................................................................. Page 37magic® - Accessories......................................................................................................................... Page 40Consultation Support ...................................................................................................................... Page 41



Brackets

Buccal Tubes

Bands

Adhesives



Supplies

Expansion Screws



Equipment


Courses

Service

The innovative Lingual-SystemThe advantage of treatment freedom

25


User-friendly product concept Increased treatment flexibility Significantly improved patient comfort Most comprehensive system

magic® – the innovative Lingual System A complete system including all the essential components The magic® Lingual System is the only system available on the market that offers all the essential components, all from the same

manufacturer. This guarantees an effective and time saving treatment, since all individual parts are perfectly matched. Apart from the brackets, the Dentaurum Lingual System consists of the following components: Lingual tubes, magic® arch wires, pliers and instruments, LinguForm arch turret and LinguSet bracket positioning unit.

The innovative Dentaurum Lingual System

26


27


magicSlide©

Easy arch wire insertion – No longer necessary to work with a mirrored image Due to the magic® bracket‘s unique geometrical form, arch wires can be inserted occlusally. The arch wire slips into the

slot as if by magic. The other advantage of the occlusal insertion is that the clinician can work without requiring a mirror. The archwire is always perfectly in view. This eases work and saves time considerably.

IntelliBend© – the anatomically shaped base Easy ligation – excellent patient comfort The base of the magic® anterior bracket is angled in accordance with the tooth anatomy. This provides maximum adapta-

tion to the tooth and therefore allowing the brackets to be positioned with minimal gingival distance, close to the center of resistance resulting in an optimal point of force application.

OrthoSlot© – the additional horizontal slot More freedom of treatment with easy handling – more comfortable for the patient The magic® brackets for the upper premolars and molars have been designed with an additional, integrated, horizontal

round slot (diameter 18), which makes it possible to affix sectional arch wires, uprighting springs or other attachments safely and easily.

CuspiShape© – the special geometrically shaped upper cuspid brackets Extremely easy arch wire ligation, even in overcrowded cases The distal section of the lingual slot wall has been shortened considerably, which creates more space for ligating the

mushroom shaped arch wires, therefore, quicker treatment procedures.

Super smooth surfaces and super rounded edges Very good wearing comfort We concentrate both on perfect functioning and above-average comfort for the patient in order to significantly improve

the lingual treatment. Results: super smooth surfaces and extremely rounded edges in order to cause as little irritation as possible to the patient‘s tongue.

Nickel free*, CoCr special alloy Excellent biocompatibility Dentaurum has made great progress in creating biocompatible products in orthodontics with the production of the nickel

free* CoCr alloy which was especially developed for the dental market. This CoCr alloy has been successfully used world-wide for many years in prosthetics.

* acc. ISO 6871-1 (1994)

Fewer types of brackets Excellent identification – economical treatment U.S. Patents No. 5,238,402 No. 5,326,259 EP No. 0327628

One-piece construction with integrated laser base Excellent biocompatibility U.S. Patent No. 5,944,517 EP No. 0327628

28


magic® – the innovative Lingual System A complete system including all the essential components The magic® Lingual-System is the only system available on the market that offers all the

essential components, all from the same manufacturer. This guarantees an effective and time saving treatment, since all individual parts are perfectly matched. Apart from the brackets, the Dentaurum Lingual-System consists of the following components:

Lingual tubes Completing the system Various lingual tubes complete this comprehensive system in connection with magic®

brackets and enables the orthodontist to work on individual treatment possibilities.

magic® arch wires A large spectrum It is essential to provide the orthodontist with a large range of arch wires. magic® arch

wires are available in various shapes, thicknesses and materials.

Pliers and instruments Efficiently working with system specific instruments The specially shaped lingual pliers in Premium-Line quality, the extra Mosquitoforceps

and the LinguBall instrument make handling easier, therefore, allowing the orthodontist to work more effectively.

magic® – the innovative Lingual System

29


LinguForm – arch turret The faster way to achieve perfectly formed arch wires A small, but essential accessory, that makes bending the arch wires easy and precise.

Time saving, yet excellent results.

LinguSet For optimal positioning of the lingual brackets The LinguSet positioning unit enables perfect, safe and efficient positioning of the

brackets, with excellent results. Easy to use and well designed.

Extensive line of accessories for the Set-up Perfectly matching accessories for excellent results The success of the lingual treatment lies in a precise set-up. Apart from the LinguSet

positioning unit, there is also an extensive line of accessories such as saw, model burs, duplicating silicone and special waxes for the set-up.

Extensive line of accessories Completing the system The magic® lingual system program is completed with a range of accessories such as

wax, plaster burs and Elasto-force chains.

30 Maxillary Mandibular Upper + Lower / Assortments


magic® - Lingual Brackets and Tubes

Tooth Vertical hook Mesial hook Width REF Quantity

15

3,3 mm 790-403-00 1 piece

14

3,3 mm 790-403-00 1 piece

13

2,9 mm 790-401-00 1 piece

12

2,6 mm 790-400-00 1 piece

11

2,6 mm 790-400-00 1 piece

21

2,6 mm 790-400-00 1 piece

22

2,6 mm 790-400-00 1 piece

23

2,9 mm 790-402-00 1 piece

24

3,3 mm 790-403-00 1 piece

25

3,3 mm 790-403-00 1 piece


45

3,3 mm 790-406-00 1 piece

44

3,3 mm 790-406-00 1 piece

43

2,3 mm 790-404-00 1 piece

42

2,3 mm 790-404-00 1 piece

41

2,3 mm 790-404-00 1 piece

31

2,3 mm 790-405-00 1 piece

32

2,3 mm 790-405-00 1 piece

33

2,3 mm 790-405-00 1 piece

34

3,3 mm 790-406-00 1 piece

35

3,3 mm 790-406-00 1 piece

magic© - nickel free** Lingual BracketsSlot: 0,51 x 0,51 mm / 20 x 20 · with vertical hook


17

6,0 mm 722-000-50* 1 piece

16

3,3 mm 790-403-00 1 piece

26

3,3 mm 790-403-00 1 piece

27

6,0 mm 722-001-50* 1 piece


47

6,0 mm 722-001-50* 1 piece

46

3,3 mm 790-406-00 1 piece

36

3,3 mm 790-406-00 1 piece

37

6,0 mm 722-000-50* 1 piece

Upper and Lower Assortments:A round tube 0,46 mm / 18, is integrated within the bracket body REF 790-403-00

* Lingual tube** in accordance with ISO 6871-1 (1994)

1 case 24 Brackets + 4 Lingual tubes 891-363-00 1 case 24 Brackets 891-371-00

Upper Assortments:

1 case 12 Brackets + 2 Lingual tubes 891-364-00 1 case 12 Brackets 891-372-00

31


magic® - Lingual Brackets and Tubes

magic® Lingual bracket small Slot: 0,51 x 0,51 mm / 20 x 20 · with vertical hook Teeth Torque Distal Offset In/Out Hook Width REF Quantity 43-41/31-33 790-409-00 1 piece

magic® Lingual bracketsSlot: 0,51 x 0,51 mm / 20 x 20 · convertible · with vertical hook Teeth Torque Distal Offset In/Out Hook Width REF Quantity 15-14/34-35 790-408-00 1 piece 45-44/24-25 790-407-00 1 piece

magic® Lingual tubes / Banding techniqueSlot: 0,51 x 0,51 mm / 20 x 20 · 2 x 0,9 mm / 2 x 36 · convertible · without hook · Palatal sheath for lingual/ palatal bars, Goshgarian, Quad-Helix, closed Teeth Torque Distal Offset In/Out Hook Width REF Quantity 17-16 4,0 mm 722-002-00 1 piece 26-27 4,0 mm 722-003-00 1 piece

magic® Lingual tubes / Bonding techniqueSlot: 0,51 x 0,51 mm / 20 x 20 · 2 x 0,9 mm / 2 x 36 · convertible · without hook · Palatal sheath for lingual/ palatal bars, Goshgarian, Quad-Helix, closed Teeth Torque Distal Offset In/Out Hook Width REF Quantity 17-16 4,0 mm 722-002-51 1 piece 26-27 4,0 mm 722-003-51 1 piece

magic® Lingual tubes / Bonding techniqueSlot: 0,51 x 0,51 mm / 20 x 20 · convertible · with hook Teeth Torque Distal Offset In/Out Hook Width REF Quantity 17-16/36-37 722-004-51 1 piece 47-46/26-27 722-005-51 1 piece

Maxillary Mandibular Upper + Lower / Assortments

32


magic® - Arches

Tensic® Lingual Arches, roundThermo-active Nickel Titanium Alloy Strength category: super elastic Mushroom arch formNo mid markingColor coded packaging: orange

ø Size Diagonal M. REF Quantity 0,30 mm / 12 1 – 766-750-00 3 pieces 0,35 mm / 14 1 – 766-722-00 3 pieces 0,40 mm / 16 1 – 766-723-00 3 pieces 0,45 mm / 18 1 – 766-724-00 3 pieces 0,30 mm / 12 2 – 766-751-00 3 pieces 0,35 mm / 14 2 – 766-726-00 3 pieces 0,40 mm / 16 2 – 766-727-00 3 pieces 0,45 mm / 18 2 – 766-728-00 3 pieces 0,30 mm / 12 3 – 766-752-00 3 pieces 0,35 mm / 14 3 – 766-730-00 3 pieces 0,40 mm / 16 3 – 766-731-00 3 pieces 0,45 mm / 18 3 – 766-732-00 3 pieces 0,30 mm / 12 4 – 766-753-00 3 pieces 0,35 mm / 14 4 – 766-734-00 3 pieces 0,40 mm / 16 4 – 766-735-00 3 pieces 0,45 mm / 18 4 – 766-736-00 3 pieces 0,30 mm / 12 5 – 766-754-00 3 pieces 0,35 mm / 14 5 – 766-738-00 3 pieces 0,40 mm / 16 5 – 766-739-00 3 pieces 0,45 mm / 18 5 – 766-740-00 3 pieces 0,30 mm / 12 6 – 766-755-00 3 pieces 0,35 mm / 14 6 – 766-742-00 3 pieces 0,40 mm / 16 6 – 766-743-00 3 pieces 0,45 mm / 18 6 – 766-744-00 3 pieces 0,30 mm / 12 7 – 766-756-00 3 pieces 0,35 mm / 14 7 – 766-746-00 3 pieces 0,40 mm / 16 7 – 766-747-00 3 pieces 0,45 mm / 18 7 – 766-748-00 3 pieces

Tensic® Lingual Arches, rectangularThermo-active Nickel Titanium Alloy Strength category: super elastic Mushroom arch formNo mid markingColor coded packaging: orange

ø Size Diagonal M. REF Quantity 0,51 x 0,51 mm / 20 x 20 1 0,64 mm 766-725-00 3 pieces 0,51 x 0,51 mm / 20 x 20 2 0,64 mm 766-729-00 3 pieces 0,51 x 0,51 mm / 20 x 20 3 0,64 mm 766-733-00 3 pieces 0,51 x 0,51 mm / 20 x 20 4 0,64 mm 766-737-00 3 pieces 0,51 x 0,51 mm / 20 x 20 5 0,64 mm 766-741-00 3 pieces 0,51 x 0,51 mm / 20 x 20 6 0,64 mm 766-745-00 3 pieces 0,51 x 0,51 mm / 20 x 20 7 0,64 mm 766-749-00 3 pieces

33* Dimensions and strength classification acc. to DIN 13971

Af Rev. F3,0 (1. Deg.) F2,0 (1. Deg.) F1,0 (1. Deg.) F0,5 (1. Deg.) F3,0 (2. Deg.) F2,0 (2. Deg.) F1,0 (2. Deg.) F0,5 (2. Deg.) 30 °C 2 % 0,49 N 0,33 N 0,29 N 0,27 N 0,49 N 0,33 N 0,29 N 0,27 N 30 °C 2 % 0,91 N 0,60 N 0,53 N 0,49 N 0,91 N 0,60 N 0,53 N 0,49 N 30 °C 2 % 1,55 N 1,03 N 0,90 N 0,84 N 1,55 N 1,03 N 0,90 N 0,84 N 30 °C 2 % 2,48 N 1,65 N 1,44 N 1,35 N 2,48 N 1,65 N 1,44 N 1,35 N 30 °C 2 % 0,49 N 0,33 N 0,29 N 0,27 N 0,49 N 0,33 N 0,29 N 0,27 N 30 °C 2 % 0,91 N 0,60 N 0,53 N 0,49 N 0,91 N 0,60 N 0,53 N 0,49 N 30 °C 2 % 1,55 N 1,03 N 0,90 N 0,84 N 1,55 N 1,03 N 0,90 N 0,84 N 30 °C 2 % 2,48 N 1,65 N 1,44 N 1,35 N 2,48 N 1,65 N 1,44 N 1,35 N 30 °C 2 % 0,49 N 0,33 N 0,29 N 0,27 N 0,49 N 0,33 N 0,29 N 0,27 N 30 °C 2 % 0,91 N 0,60 N 0,53 N 0,49 N 0,91 N 0,60 N 0,53 N 0,49 N 30 °C 2 % 1,55 N 1,03 N 0,90 N 0,84 N 1,55 N 1,03 N 0,90 N 0,84 N 30 °C 2 % 2,48 N 1,65 N 1,44 N 1,35 N 2,48 N 1,65 N 1,44 N 1,35 N 30 °C 2 % 0,49 N 0,33 N 0,29 N 0,27 N 0,49 N 0,33 N 0,29 N 0,27 N 30 °C 2 % 0,91 N 0,60 N 0,53 N 0,49 N 0,91 N 0,60 N 0,53 N 0,49 N 30 °C 2 % 1,55 N 1,03 N 0,90 N 0,84 N 1,55 N 1,03 N 0,90 N 0,84 N 30 °C 2 % 2,48 N 1,65 N 1,44 N 1,35 N 2,48 N 1,65 N 1,44 N 1,35 N 30 °C 2 % 0,49 N 0,33 N 0,29 N 0,27 N 0,49 N 0,33 N 0,29 N 0,27 N 30 °C 2 % 0,91 N 0,60 N 0,53 N 0,49 N 0,91 N 0,60 N 0,53 N 0,49 N 30 °C 2 % 1,55 N 1,03 N 0,90 N 0,84 N 1,55 N 1,03 N 0,90 N 0,84 N 30 °C 2 % 2,48 N 1,65 N 1,44 N 1,35 N 2,48 N 1,65 N 1,44 N 1,35 N 30 °C 2 % 0,49 N 0,33 N 0,29 N 0,27 N 0,49 N 0,33 N 0,29 N 0,27 N 30 °C 2 % 0,91 N 0,60 N 0,53 N 0,49 N 0,91 N 0,60 N 0,53 N 0,49 N 30 °C 2 % 1,55 N 1,03 N 0,90 N 0,84 N 1,55 N 1,03 N 0,90 N 0,84 N 30 °C 2 % 2,48 N 1,65 N 1,44 N 1,35 N 2,48 N 1,65 N 1,44 N 1,35 N 30 °C 2 % 0,49 N 0,33 N 0,29 N 0,27 N 0,49 N 0,33 N 0,29 N 0,27 N 30 °C 2 % 0,91 N 0,60 N 0,53 N 0,49 N 0,91 N 0,60 N 0,53 N 0,49 N 30 °C 2 % 1,55 N 1,03 N 0,90 N 0,84 N 1,55 N 1,03 N 0,90 N 0,84 N 30 °C 2 % 2,48 N 1,65 N 1,44 N 1,35 N 2,48 N 1,65 N 1,44 N 1,35 N

remanium® Straight Wires see “Wires and Arches“

Af Rev. F3,0 (1. Deg.) F2,0 (1. Deg.) F1,0 (1. Deg.) F0,5 (1. Deg.) F3,0 (2. Deg.) F2,0 (2. Deg.) F1,0 (2. Deg.) F0,5 (2. Deg.) 30 °C 2 % 4,62 N 1,63 N 1,35 N 1,11 N 4,62 N 1,63 N 1,35 N 1,11 N 30 °C 2 % 4,62 N 1,63 N 1,35 N 1,11 N 4,62 N 1,63 N 1,35 N 1,11 N 30 °C 2 % 4,62 N 1,63 N 1,35 N 1,11 N 4,62 N 1,63 N 1,35 N 1,11 N 30 °C 2 % 4,62 N 1,63 N 1,35 N 1,11 N 4,62 N 1,63 N 1,35 N 1,11 N 30 °C 2 % 4,62 N 1,63 N 1,35 N 1,11 N 4,62 N 1,63 N 1,35 N 1,11 N 30 °C 2 % 4,62 N 1,63 N 1,35 N 1,11 N 4,62 N 1,63 N 1,35 N 1,11 N 30 °C 2 % 4,62 N 1,63 N 1,35 N 1,11 N 4,62 N 1,63 N 1,35 N 1,11 N


34


magic® - Arches

remanium® Lingual Arches, rectangularStrength category: spring hard plus * · 2000 to under 2300 N/mm2


F Diagonal M. REF Quantity 0,48 x 0,48 mm / 19 x 19 0,62 mm 767-212-00 3 pieces 0,51 x 0,51 mm / 20 x 20 0,48 x 0,48 mm / 19 x 19 0,64 mm 767-213-00 3 pieces

rematitan® SPECIAL Lingual Arches, rectangularNickel free Titanium Molybdenum AlloyStrength category: middle plus * · 1100 to under 1400 N/mm2


F Diagonal M. REF Quantity 0,51 x 0,51 mm / 20 x 20 0,64 mm 766-630-00 3 pieces

35* Dimensions and strength classification acc. to DIN 13971

E-Modul Rm Rp0,2 A Sb (1. Deg.) S0,1 (1. Deg.) Sb (2. Deg.) S0,1 (2. Deg.) 170 kN/mm2 2200 N/mm2 1800 N/mm2 2,3 % 20,0 N/mm 15,9 N 20,0 N/mm 15,9 N

170 kN/mm2 2200 N/mm2 1800 N/mm2 2,3 % 22,8 N/mm 18,1 N 22,8 N/mm 18,1 N


E-Modul Rm Rp0,2 A Sb (1. Deg.) S0,1 (1. Deg.) Sb (2. Deg.) S0,1 (2. Deg.) 75 kN/mm2 1200 N/mm2 1000 N/mm2 3,6 % 14,3 N/mm 14,3 N 14,3 N/mm 14,3 N


36

Template for Mushroom Arches in the Lingual Techniquewith 7 arch sizes. For measuring the size of the mushroom arch.Dimensions: 170 x 80 mm

Color: Plastic transparent, clear

004-372-00 1 piece


magic® - Instruments

LinguForm Arch TurretSterilizable For forming flat, plain arches in round or square wires for the lingual technique.ø 0.35 mm / 14, F 0.35 mm / 14 ø 0.41 mm / 16, F 0.41 mm / 16 ø 0.46 mm / 18, F 0.46 mm / 18 ø 0.48 mm / 19, F 0.48 mm / 19 ø 0.51 mm / 20, F 0.51 mm / 20

Tinted silver.

004-190-00 1 piece

magic® Lingual Bending PliersSterilizable For bending in increments and to compensate curves in arch wire for the lingual technique. Increments: 1.5, 2.0, 2.5 and 3.0 mm. For wires up to ø 0.5 mm hard.Premium-Line · 10 Year Guarantee

003-001-00 1 piece

magic® Mosquito-Forceps, curvedSterilizable For placing and ligating Dentalastics® plastic ligatures and magic® SUPER “Elasto-Force” plastic chains, specially for the lingual technique.

000-732-00 1 piece

LinguBall InstrumentSterilizable For easy and gentle removal of excess adhesive during indirect bonding for the lingual technique.

023-275-00 1 piece

37


magic® - LinguSet

LinguSet Bracket Positioning UnitFor the exact positioning of magic® lingual brackets and lingual tubes on the final set-up model. Contents of assortment: LinguSet bracket positioner, as well as LinguSet accessories (REF 076-101-00 to REF 076-115-00).The LinguSet model table (REF 076-112-00) and the LinguSet Laser Positioner (REF 076-114-00) is not included!

076-100-01 1 piece

LinguSet Model TableMoveable working table with double fastening. For quick model fixing.Not included with Set 076-100-01!

076-112-00 1 piece

LinguSet Laser PositionerFor accurate alignment of the bow plane parallel to the working and occlusion plane.Not included with Set 076-100-01!

076-114-00 1 piece

LinguSet Positioning PlateTo adjust the masticatory plane parallel to the table and bonding plane.

076-113-00 1 piece

LinguSet Anterior Tooth Positioning HolderAccomodates the LinguSet bracket holder. 076-101-00 1 piece

38


magic® - LinguSet

LinguSet Bracket Holder for Teeth 13/23magic® Lingual bracket holder for upper cuspids.

076-110-00 1 piece

LinguSet Bracket Holder for Teeth 43-41/31-33magic® Lingual bracket holder for lower anteriors.

076-111-00 1 piece

LinguSet Posterior Tooth Positioning HolderAccommodates the LinguSet bracket positioning aid.

076-102-00 1 piece

LinguSet Bracket Positioning Aid, no intervalsFor positioning magic® lingual brackets in the posterior region.

076-103-00 1 piece

LinguSet Bracket Positioning Aid with 1 mm intervalsFor positioning magic® lingual brackets in the posterior region.

076-104-00 1 piece

LinguSet Bracket Positioning Aid with 2 mm intervalsFor positioning magic® lingual brackets in the posterior region.

076-105-00 1 piece

LinguSet Bracket Holder for Teeth 12-11/21-22magic® Lingual bracket holder for upper centrals.

076-109-00 1 piece

39


magic® - LinguSet

LinguSet Bracket Positioning Aid for 2 posterior teethFor positioning one or two magic® lingual brackets in the posterior region.

076-107-00 1 piece

LinguSet Positioning Aid for magic® Lingual tubes 20 x 20For positioning the magic® lingual tubes. 076-108-00 1 piece

LinguSet Seating AidFor convertible magic® lingual brackets and lingual tubes.For positioning the convertible magic® lingual brackets REF 790-407-00 and 790-408-00 and lingual tubes REF 722-002-51, 722-003-51, 722-004-51 and 722-005-51.

076-115-00 1 piece

LinguSet Bracket Positioning Aid for 1 posterior toothFor positioning one magic® lingual bracket in the posterior region.

076-106-00 1 piece

40

magic® SUPER "Elasto-Force" Plastic Chains, with Short ConnectorConsistent tensile force over a long period of time. Very high elasticity with excellent elastic recovery. Especially flat ring shape, ideal for the lingual technique and for multiple ligatures. Extremely tough.Inner diameter: ø 1.3 mm Roll 3.5 m

Color: transparent

774-210-00 1 Rolle


magic® - Accessories

magic® SUPER "Elasto-Force" Plastic Chains, without Short ConnectorConsistent tensile force over a long period of time. Very high elasticity with excellent elastic recovery. Especially flat ring shape, ideal for the lingual technique and for multiple ligatures. Extremely tough.Inner diameter: ø 1.3 mm Roll 3.5 m

Color: transparent

774-211-00 1 Rolle

LinguSil(Polyvinylsiloxan) Transfer matrix for brackets (indirect bonding). Contents: 1 x 50 ml cartridge 6 x mixing nozzles Product qualities: · Application time approx. 45 seconds· Shore A hardness 72· Especially suited for the light curing

technique· To produce transparent trays for the

lingual and buccal transfer of brackets into the patient’s mouth

· Two-component silicon (Polyvinylsiloxan) in a cartridge

· High elasticity, yet a form-stable material· High tear resistance· Easy to cut (single tooth trays)· Can be used for the lingual technique as

well as for prosthetics and implantologieColor: transparent

164-000-00 1 Set

LinguSil InjectorMixing cartridge for LinguSil. 164-001-00 1 piece

41


magic® - Accessories

Consultation Support

magic® - Info-SetContents: CD-ROM with Short Info 903-944-45 1 piece

magic® Tray ConnectorFor magic® Lingual brackets.Single-bracket transfer aid for accurate transfer from the ideal setup to the mal occlusion cast or directly to the patient‘s teeth.

164-002-15 15 pieces

164-002-30 30 pieces

Brackets

42

Metal Brackets / Assortments Roth 18 (discovery® / topic / equilibrium® 2 / equilibrium® mini / equilibrium® ti) ............................. Seite 58 Roth 22 (discovery® / topic / equilibrium® 2 / equilibrium® mini / equilibrium® ti) ............................. Seite 63 McLaughlin-Bennett-Trevisi* 18 (equilibrium® 2 / equilibrium® ti) ................................................ Seite 68 McLaughlin-Bennett-Trevisi* 22 (equilibrium® 2 / equilibrium® mini / equilibrium® ti) .................. Seite 70 Ricketts® 18 – IV. Dimension (discovery®) ..................................................................................... Seite 73 Ricketts® Universal 18 (discovery® / equilibrium® 2) ...................................................................... Seite 74 Hilgers 18 (discovery®) ................................................................................................................... Seite 75 Standard Edgewise 18 (equilibrium® 2) ........................................................................................ Seite 76 Standard Edgewise 22 (equilibrium® 2) ........................................................................................ Seite 77 Tweed 22 (equilibrium® 2).............................................................................................................. Seite 78

Metal Brackets / Single Packs discovery® ..................................................................................................................................... Seite 79 topic .............................................................................................................................................. Seite 80 equilibrium® 2............................................................................................................................... Seite 81 Brackets / Bandtechnik ................................................................................................................ Seite 82

Ceramic Brackets / Assortments / Single Packs Fascination® ................................................................................................................................. Seite 88 Fascination® 2 ............................................................................................................................... Seite 91 Jewels ........................................................................................................................................... Seite 93

Plastic Brackets / Assortments / Single Packs Elegance® ..................................................................................................................................... Seite 98

Bracket Accessories ................................................................................................................... Seite 102

Consultation Support ............................................................................................................... Seite 106

Service ............................................................................................................................................ Seite 398

NEW: discovery® sl see page 56–57!


Ricketts® is a registered trademark of Rocky Mountain Orthodontics.Dentaurum’s version of Roth, Ricketts®, Hilgers, Hasund, Alexander, Andrews and Burstone are not claimed to be a duplication of any other, nor does Dentaurum imply that they are endorsed in any way by Dr. Roth, Dr. Ricketts, Dr. Hilgers, Dr. Hasund, Dr. Alexander, Dr. Andrews and Dr. Burstone.



Brackets

Buccal Tubes

Bands

Adhesives



Supplies

Expansion Screws



Equipment


Courses

Service

Dentaurum BracketsAlways a good choice

Brackets

43

44

Brackets

Information can be found easily with DENTAURUM’s color coded catalog:

Maxillary Mandibular Upper and Lower Assortments

AN

GU

LATI

ON

OCCLUSAL– GINGIVAL

MID AXIS

VER

TIC

AL

SLO

T

MID AXIS PROFILE

OCCLUSAL – GINGIVAL MEASUREMENT

SLO

T D

EPTH

SLOT WIDTH

TORQUE

IN/O

UT

BASE

Select your System:

Rounded edges for maximum patient comfort

Arch positioning with precise accuracy

FDI-System18 17 16 15 14 13 12 11 21 22 23 24 25 26 27 28 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8

8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 848 47 46 45 44 43 42 41 31 32 33 34 35 36 37 38

Bracketsysteme / discovery® discovery® sl topic equilibrium® 2 equilibrium® equilibrium® ti Bandbrackets Jewels Fascination® Fascination® 2 Elegance® Bracketausführungen mini

Roth x x x x x x x x x x x

McLaughlin/Bennett/Trevisi* x x x x

Ricketts® x x x

Hilgers x x

Standard Edgewise x x x x

Hasund x

Alexander x

Andrews x

Burstone x

Tweed x x

Begg Light Wire Technik x


Ricketts® is a registered trademark of Rocky Mountain Orthodontics.

R L

MESIAL – DISTAL MEASUREMENT

Brackets

45

Dentaurum Brackets

Most modern construction and production methods Excellent function –

perfect comfort Dentaurum Brackets are not only characterized by

minimal size and maximal strength, but also by ideal-ly rounded edges and bracket bases, which create a perfect fit. The introduction of laser structured** bracket bases has benefited one-piece construction techniques immensely. Dentaurum brackets are the first biocompatibly, laser marked* brackets, which not only aids identification but also positioning.

A wide spectrum For each patient the right bracket Dentaurum brackets cover a wide spectrum of tech-

niques; classics, new and special.

Dentaurum is the only manufacturer worldwide to offer orthodontic brackets in high corrosion resistant, medical steel alloys (including nickel free alloys), pure titanium, ceramic and plastic. No other company offers such a wide spectrum of especially biocompatible, orthodontic products.

Always a good choice

* US Patent No. 5,238,402 No. 5,326,259 EU Patent EP No. 0327628

1) acc. to ISO 6871-1 (1994)

** US Patent No. 5,944,517 EU Patent EP No. 0841877

... the smallest ... the nickel free1) ... the aesthetic ... the lingual

46

Metal Brackets

Manufactured debonding channel Successful debonding With the aid of FEM (Finite Element Method) it

was possible to reduce the material thickness of the brackets in specific places. One reduc-tion was made vertically between the bracket wings. This manufactured debonding channel eases bracket debonding without causing loss of rigidity during treatment.

Low friction values Better sliding mechanics and

efficiency Friction from wires in the slot of Discovery®

brackets has been substantially improved due to the alloy used, slot design and special sur-face treatment. (Study: Prof. Dr. Kusy, University of North Carolina

The sum of experience

Upper central 10% narrower!

Metal Brackets

47

Gingival offset brackets* Prevents premature debonding The occlusally adjusted bracket base and the gingivally adjusted bracket profile prevent premature bracket

debonding due to antagonist contact.

* with mandibular brackets

Patented laser marking Easy identification and placement Patented laser marking helps to identify each individual bracket and allows for easy bracket placement. It is

permanent and contains no questionable dyes. A clearly marked symbol system shows exactly which bracket is for which tooth.

U.S. Patents No. 5,238,402 EP No. 0327628 No. 5,326,259

Rounded bracket tie wings Easy ligation The shape of the bracket is distinctly rounder when compared to mechanically produced brackets, therefore,

greater patient comfort. Optimally rounded bracket tie wings allow for easy and fast ligation.

MIM construction Optimal mechanical characteristics The MIM process (Metal Injection Molding), together with the use of a special dental alloy, increases the

strength and rigidity of the brackets.

3D – CAD bracket bases Optimized fit The CAD (Computer Aided Design) developed Discovery® bracket shape has a base which is perfectly adapted

to the anatomy of the individual tooth. The bases are contoured mesio-distally and occlusal-gingivally. This optimal shape prevents rocking, as well as facilitates placement and bonding.

FDI System18 17 16 15 14 13 12 11 21 22 23 24 25 26 27 28 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8

8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 848 47 46 45 44 43 42 41 31 32 33 34 35 36 37 38

R L

48

Metal Brackets

Manufactured debonding channel Successful debonding With the aid of FEM (Finite Element Method) it

was possible to reduce the material thickness of the brackets in specific places. One reduc-tion was made vertically between the bracket wings. This manufactured debonding channel eases bracket debonding without causing loss of rigidity during treatment.

Nickel free* CoCr special alloy Excellent biocompatibility The use of Dentaurum´s specially developed

nickel free* CoCr dental alloy is an important and successful step toward more biocompatible products in the orthodontic field. This CoCr alloy has been used for many years in the field of prosthetics. Galvanic corrosion, which occurs with mesh bases and solder, can be avoided by using patented laser retention, therefore consi-derably improving biocompatibility.

* in accordance with ISO 6871-1 (1994)

The nickel free* premium bracket

Upper central 10% narrower!

Metal Brackets

49

3D – CAD bracket bases Optimal fit The CAD (Computer Aided Design) developed Topic bracket shape has a base which is perfectly adapted to the

anatomy of the individual tooth. The bases are contoured mesio-distally and occlusal-gingivally. This optimal shape prevents rocking, as well as facilitates placement and bonding.

Patented laser structure Optimized bonding strength Evenly distributed retention, resulting from the optimized laser structure in the bracket base, enables an ideal

bond and reduces the risk of premature loosening. Adhesive setting is improved.

The distribution of macro and micro retention enhances the adhesive / bracket bond. The result is a perfect combination between the required, tooth specific bond strength and optimal debonding characteristics.

U.S. Patent No. 5,944,517 EP No. 0841877

Rounded bracket tie wings Easy ligation The shape of the bracket is distinctly rounder when compared to mechanically produced brackets, therefore,

greater patient comfort. Optimally rounded bracket tie wings allow for easy and fast ligation.

Patented laser marking Easy identification and placement Patented laser marking helps to identify each individual bracket and allows for easy bracket placement. It is

permanent and contains no questionable dyes. A clearly marked symbol system shows exactly which bracket is for which tooth.


MIM construction Optimal mechanical characteristics The MIM process (Metal Injection Molding), together with the use of a special dental alloy, increases the

strength and rigidity of the brackets.

FDI System18 17 16 15 14 13 12 11 21 22 23 24 25 26 27 28 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8

8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 848 47 46 45 44 43 42 41 31 32 33 34 35 36 37 38

R L

50

Metal Brackets

Improved, patented laser structured base Optimized bonding properties –

easy debonding The even retention of the optimized laser structured

bracket base produces an optimum bonding strength, and also reduces premature debonding. The surface for adhesive application has been optimized. The ideal combination of macro and micro retention improves the adhesive/bracket bond. The result is a perfect combination between the bonding strength required for each individual tooth and optimal debonding characteristics.

Patente: US No. 5,944,517 EP No. 0841877

Optimized base Perfect fit – easy handling For an even better fit, the contour of the bracket

base has been optimized for cuspids, first bicuspids and second bicuspids. Furthermore, the mesial-distal side of the bracket base has been redesigned to make it easier to grasp and place the bracket.

Harmony in function and comfort

Also available as band bracket!

Compact design Optimized retention – very appealing The retention is in the bracket base not in a mesh base that has been soldered on. Therefore, the brackets have

a lower profile, they are comfortable to wear and aesthetically appealing. Furthermore, the In/Out is smaller and the transfer of force is optimized.

Gingival Offset Best comfort and highest acceptance The gingival offset of equilibrium® 2 brackets ensures that there is no occlusal interference in the premolar area.

The gingival offset of the bracket wings also prevent gum irritation. The low profile of the brackets ensures that they are comfortable for the patient to wear.

Rhomboid base Accurate positioning The mid marking and rhomboid base of equilibrium® 2 brackets greatly facilitate the positioning on the center

of the clinical crown.

Original laser base one-piece construction Excellent biocompatibility The patented laser retention makes it possible to work with only one material, eliminating the need for other

alloys and solder, therefore, improving the biocompatibility.

Special geometric bracket wings Comfortable and reliable ligating The ideal shape of equilibrium® 2 bracket wings and their extremely practical deep tie wing undercuts, make

even multiple ligation very easy.

With immediate effect a large part of the proven Ultratrimm® band brackets are replaced by the new and up-to-date equilibrium® 2 band brackets.

For you this change means a wide range of important advantages:

You receive the same modern bracket type, that you also use in the adhesive technique

You work with the same in/out values

You use modern 1-piece-brackets

You use brackets made of biocompatible, highly corrosion-resistant stainless steel

Metal Brackets

51

Still easier bracket identification by FDI-marking on the base

FDI System18 17 16 15 14 13 12 11 21 22 23 24 25 26 27 28 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8

8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 848 47 46 45 44 43 42 41 31 32 33 34 35 36 37 38

R L

NEW: equilibrium® 2 Band Brackets !

The smallest bracket in the world

52

Metal Brackets

Metal Brackets

53

The world’s smallest bracket Aesthetics as yet unknown to metal brackets Thanks to modern computer aided construction and production methods it is now possible to provide all the

advantages in metal brackets for an effective orthodontic treatment and at the same time guarantee the best aesthetics. equilibrium® mini brackets are metal brackets with the smallest VSI-Factor* world wide and give the orthodon-tist new perspectives for perfect results and an aesthetically pleasing and economically coherent treatment.

* VSI: ViSual Impact; This factor gives details on how large a bracket appears on a tooth

One-piece construction with integrated laser base Excellent biocompatibility The patented laser retention method means only one material is used, as other metals and solder are not

required. This improves the biocompatibility significantly.

High precision Optimal treatment The high strength of the aesthetic equilibrium® mini brackets guarantees the dimensional stability of the square

precision slot. The fact that the torque and angulations values are guaranteed means that the necessary amount of arch wire force can be correctly transferred.

Patented laser structure Optimal bonding strength – easier debonding The laser structure’s evenly distributed retention in the bracket base creates an excellent bond and reduces the

risk of premature debonding. Adhesive wetting is improved. The even distribution of macro-micro retention enhances the adhesive/bracket bond. The result is a perfect combination between the bonding strength required for each individual tooth and optimal debonding characteristics.

Patents: US No. 5,944,517 EP No. 0841877

equilibrium® mini VSI*: 0.78

FDI System18 17 16 15 14 13 12 11 21 22 23 24 25 26 27 28 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8

8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 848 47 46 45 44 43 42 41 31 32 33 34 35 36 37 38

R L


54

Metal Brackets

The bracket made of pure titanium

Improved, patented laser structured base Optimized bonding properties –

easy debonding The even retention of the optimized laser structured

bracket base produces an optimum bonding strength, and also reduces premature debonding. The surface for adhesive application has been optimized. The ideal combination of macro and micro retention improves the adhesive/bracket bond. The result is a perfect combination between the bonding strength required for each individual tooth and optimal debonding characteristics.

Patents: US No. 5,944,517 EP No. 0841877

Pure titanium: extremely corrosion resistant Excellent biocompatibility Titanium, among all metals that are being used for

dental applications, has the highest biocompatibility.

Profit from the know how of the market leader. Perfect brackets made of pure titanium.

Unbeatable price - performance ratio!

Pure titanium: super strong Extraordinary properties Mechanically, titanium is extremely strong as well as neutral in taste, therefore, perfectly suited for the use in

orthodontics.

Pure titanium: low friction Effective treatment Due to a special surface treatment, the slot of equilibrium® ti brackets provide excellent friction values1) 2). The

friction values can be compared with stainless steel brackets. By using nickel-titanium arch wire, the friction values are even better.

1) R.P. Kusy and J.Q.Withley: Friction between different wire-bracket configurations and materials. Semin. Orthod. 1997; 3: 166-177

2) R.P. Kusy and P.W. O’Grady: Evaluation of titanium brackets for orthodontic treatment. Am. J. Orthod. Dentofacial Orthop 2000; 118: 675-684 und 1998; 114: 558-572

Special geometric bracket wings Comfortable and reliable ligating The ideal shape of equilibrium® ti bracket wings and their extremely practical deep tie wing undercuts, make

even multiple ligation very easy.

Highest precision Optimal treatment The rigidity of the graceful equilibrium® ti bracket guarantees the dimensional stability of the precision slot.

Exact torque and angulation values ensure correct transmission of the required arch wire forces.

Patented laser marking Easy identification Quick and reliable identification of the distinct symbols on all equilibrium® ti brackets due to the patented laser

marking. Compared to conventional markings, laser marking cannot be abraded and does not contain harmful coloring agents.


Metal Brackets

55

FDI System18 17 16 15 14 13 12 11 21 22 23 24 25 26 27 28 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8

8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 848 47 46 45 44 43 42 41 31 32 33 34 35 36 37 38

R L


56

Metal Brackets

Outstanding therapy efficiency Reliable and accurate 3D control of tooth movements, broad therapeutic freedom for custom solutions,

saves time for orthodontist and patient.

Outstanding user comfort Easy placement of brackets, reliable and secure locking mechanism, easier and faster bow replacement,

easy debonding.

Outstanding patient comfort More comfortable to wear, simple oral hygiene, good aesthetics and excellent biocompatibility.

Outstanding in all three areas of modern SL therapy

For details see www.discovery-sl.de

Metal Brackets

57Maxillary Mandibular Upper + Lower / Assortments

Roth 22 / Assortiments

Torque Angulation In/Out Width REF Quantity

- 7° 0° 0,7 mm 2,6 mm 722-101-15 1 piece

- 7° 0° 0,7 mm 2,6 mm 722-101-14 1 piece

- 2° + 13° 0,7 mm 2,6 mm 722-141-13 1 piece

+ 8° + 9° 1,3 mm 2,4 mm 722-101-12 1 piece

+ 12° + 5° 0,7 mm 2,6 mm 722-101-11 1 piece

+ 12° + 5° 0,7 mm 2,6 mm 722-101-21 1 piece

+ 8° + 9° 1,3 mm 2,4 mm 722-101-22 1 piece

- 2° + 13° 0,7 mm 2,6 mm 722-141-23 1 piece

- 7° 0° 0,7 mm 2,6 mm 722-101-24 1 piece

- 7° 0° 0,7 mm 2,6 mm 722-101-25 1 piece


- 22° 0° 0,7 mm 2,6 mm 722-101-45 1 piece

- 17° 0° 0,7 mm 2,6 mm 722-101-44 1 piece

- 11° + 7° 0,7 mm 2,6 mm 722-141-43 1 piece

- 1° 0° 1,3 mm 2,4 mm 722-101-42 1 piece

- 1° 0° 1,3 mm 2,4 mm 722-101-41 1 piece

- 1° 0° 1,3 mm 2,4 mm 722-101-31 1 piece

- 1° 0° 1,3 mm 2,4 mm 722-101-32 1 piece

- 11° + 7° 0,7 mm 2,6 mm 722-141-33 1 piece

- 17° 0° 0,7 mm 2,6 mm 722-101-34 1 piece

- 22° 0° 0,7 mm 2,6 mm 722-101-35 1 piece

Assortments:

1 case 20 Brackets 722-101-01 10 cases 200 Brackets 722-101-10

discovery® slSlot: 0,56 x 0,76 mm / 22 x 30 · Cuspid brackets with hooks


Available 2008 ! Available 2008 ! Available 2008 ! Available 2008 ! Available 2008 ! Available 2008 !


Metal Brackets

Roth 18 / Assortments


- 7° 0° 0,7 mm 3,4 mm 790-106-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-106-00 10 pieces

- 2° + 13° 0,7 mm 3,4 mm 790-104-00 10 pieces

+ 8° + 9° 1,3 mm 3,2 mm 790-102-00 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 790-163-00 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 790-164-00 10 pieces

+ 8° + 9° 1,3 mm 3,2 mm 790-103-00 10 pieces

- 2° + 13° 0,7 mm 3,4 mm 790-105-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-106-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-106-00 10 pieces


- 22° 0° 0,7 mm 3,3 mm 790-111-00 10 pieces

- 17° 0° 0,7 mm 3,3 mm 790-110-00 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 790-108-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-107-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-107-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-107-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-107-00 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 790-109-00 10 pieces

- 17° 0° 0,7 mm 3,3 mm 790-110-00 10 pieces

- 22° 0° 0,7 mm 3,3 mm 790-111-00 10 pieces

Assortments:

1 case 20 Brackets 891-180-00 10 cases 200 Brackets 891-181-00 50 cases 1.000 Brackets 891-182-00

discovery®

Slot: 0,46 x 0,76 mm / 18 x 30 · Cuspid brackets with hooks


- 7° 0° 0,7 mm 3,4 mm 790-141-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-141-00 10 pieces

- 2° + 13° 0,7 mm 3,4 mm 790-104-00 10 pieces

+ 8° + 9° 1,3 mm 3,2 mm 790-102-00 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 790-163-00 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 790-164-00 10 pieces

+ 8° + 9° 1,3 mm 3,2 mm 790-103-00 10 pieces

- 2° + 13° 0,7 mm 3,4 mm 790-105-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-142-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-142-00 10 pieces


- 22° 0° 0,7 mm 3,3 mm 790-145-00 10 pieces

- 17° 0° 0,7 mm 3,3 mm 790-143-00 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 790-108-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-107-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-107-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-107-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-107-00 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 790-109-00 10 pieces

- 17° 0° 0,7 mm 3,3 mm 790-144-00 10 pieces

- 22° 0° 0,7 mm 3,3 mm 790-146-00 10 pieces

Assortments:


discovery®

Slot: 0,46 x 0,76 mm / 18 x 30 · Hooks on cuspid, first bicuspid and second bicuspid brackets

Dentaurum’s version of Roth is not claimed to be a duplication of any other, nor does Dentaurum imply that it is endorsed in any way by Dr. Roth.



- 7° 0° 0,7 mm 3,4 mm 790-306-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-306-00 10 pieces

- 2° + 13° 0,7 mm 3,4 mm 790-304-00 10 pieces

+ 8° + 9° 1,3 mm 3,2 mm 790-302-00 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 790-363-00 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 790-364-00 10 pieces

+ 8° + 9° 1,3 mm 3,2 mm 790-303-00 10 pieces

- 2° + 13° 0,7 mm 3,4 mm 790-305-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-306-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-306-00 10 pieces


- 22° 0° 0,7 mm 3,4 mm 790-311-00 10 pieces

- 17° 0° 0,7 mm 3,4 mm 790-310-00 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 790-308-00 10 pieces

- 1° 0° 1,3 mm 2,7 mm 790-307-00 10 pieces

- 1° 0° 1,3 mm 2,7 mm 790-307-00 10 pieces

- 1° 0° 1,3 mm 2,7 mm 790-307-00 10 pieces

- 1° 0° 1,3 mm 2,7 mm 790-307-00 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 790-309-00 10 pieces

- 17° 0° 0,7 mm 3,4 mm 790-310-00 10 pieces

- 22° 0° 0,7 mm 3,4 mm 790-311-00 10 pieces

Assortments:


topicSlot: 0,46 x 0,76 mm / 18 x 30 · Cuspid brackets with hooks


- 7° 0° 0,7 mm 3,4 mm 790-341-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-341-00 10 pieces

- 2° + 13° 0,7 mm 3,4 mm 790-304-00 10 pieces

+ 8° + 9° 1,3 mm 3,2 mm 790-302-00 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 790-363-00 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 790-364-00 10 pieces

+ 8° + 9° 1,3 mm 3,2 mm 790-303-00 10 pieces

- 2° + 13° 0,7 mm 3,4 mm 790-305-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-342-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-342-00 10 pieces


- 22° 0° 0,7 mm 3,4 mm 790-345-00 10 pieces

- 17° 0° 0,7 mm 3,4 mm 790-343-00 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 790-308-00 10 pieces

- 1° 0° 1,3 mm 2,7 mm 790-307-00 10 pieces

- 1° 0° 1,3 mm 2,7 mm 790-307-00 10 pieces

- 1° 0° 1,3 mm 2,7 mm 790-307-00 10 pieces

- 1° 0° 1,3 mm 2,7 mm 790-307-00 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 790-309-00 10 pieces

- 17° 0° 0,7 mm 3,4 mm 790-344-00 10 pieces

- 22° 0° 0,7 mm 3,4 mm 790-346-00 10 pieces

Assortments:


topicSlot: 0,46 x 0,76 mm / 18 x 30 · Hooks on cuspid, first bicuspid and second bicuspid brackets

Metal Brackets





- 7° 0° 0,7 mm 3,1 mm 718-301-15 10 pieces

- 7° 0° 0,7 mm 3,1 mm 718-301-14 10 pieces

- 2° + 13° 0,7 mm 3,1 mm 718-341-13 10 pieces

+ 8° + 9° 1,3 mm 3,0 mm 718-301-12 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 718-301-11 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 718-301-21 10 pieces

+ 8° + 9° 1,3 mm 3,0 mm 718-301-22 10 pieces

- 2° + 13° 0,7 mm 3,1 mm 718-341-23 10 pieces

- 7° 0° 0,7 mm 3,1 mm 718-301-24 10 pieces

- 7° 0° 0,7 mm 3,1 mm 718-301-25 10 pieces


- 22° 0° 0,7 mm 3,1 mm 718-301-45 10 pieces

- 17° 0° 0,7 mm 3,1 mm 718-301-44 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 718-341-43 10 pieces

- 1° 0° 1,3 mm 2,4 mm 718-301-42 10 pieces

- 1° 0° 1,3 mm 2,4 mm 718-301-41 10 pieces

- 1° 0° 1,3 mm 2,4 mm 718-301-31 10 pieces

- 1° 0° 1,3 mm 2,4 mm 718-301-32 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 718-341-33 10 pieces

- 17° 0° 0,7 mm 3,1 mm 718-301-34 10 pieces

- 22° 0° 0,7 mm 3,1 mm 718-301-35 10 pieces

Assortments:


Metal Brackets


equilibrium® 2Slot: 0,46 x 0,76 mm / 18 x 30 · Cuspid brackets with hooks · Note: cuspid brackets without hooks (see single packs)


- 7° 0° 0,7 mm 3,1 mm 718-341-15 10 pieces

- 7° 0° 0,7 mm 3,1 mm 718-341-14 10 pieces

- 2° + 13° 0,7 mm 3,1 mm 718-341-13 10 pieces

+ 8° + 9° 1,3 mm 3,0 mm 718-301-12 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 718-301-11 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 718-301-21 10 pieces

+ 8° + 9° 1,3 mm 3,0 mm 718-301-22 10 pieces

- 2° + 13° 0,7 mm 3,1 mm 718-341-23 10 pieces

- 7° 0° 0,7 mm 3,1 mm 718-341-24 10 pieces

- 7° 0° 0,7 mm 3,1 mm 718-341-25 10 pieces


- 22° 0° 0,7 mm 3,1 mm 718-341-45 10 pieces

- 17° 0° 0,7 mm 3,1 mm 718-341-44 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 718-341-43 10 pieces

- 1° 0° 1,3 mm 2,4 mm 718-301-42 10 pieces

- 1° 0° 1,3 mm 2,4 mm 718-301-41 10 pieces

- 1° 0° 1,3 mm 2,4 mm 718-301-31 10 pieces

- 1° 0° 1,3 mm 2,4 mm 718-301-32 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 718-341-33 10 pieces

- 17° 0° 0,7 mm 3,1 mm 718-341-34 10 pieces

- 22° 0° 0,7 mm 3,1 mm 718-341-35 10 pieces

Assortments:


equilibrium® 2Slot: 0,46 x 0,76 mm / 18 x 30 · Hooks on cuspid, first bicuspid and second bicuspid brackets






- 7° 0° 0,7 mm 2,4 mm 718-401-15 10 pieces

- 7° 0° 0,7 mm 2,4 mm 718-401-14 10 pieces

- 2° + 13° 0,7 mm 2,4 mm 718-441-13 10 pieces

+ 8° + 9° 1,3 mm 2,2 mm 718-401-12 10 pieces

+ 12° + 5° 0,7 mm 2,4 mm 718-401-11 10 pieces

+ 12° + 5° 0,7 mm 2,4 mm 718-401-21 10 pieces

+ 8° + 9° 1,3 mm 2,2 mm 718-401-22 10 pieces

- 2° + 13° 0,7 mm 2,4 mm 718-441-23 10 pieces

- 7° 0° 0,7 mm 2,4 mm 718-401-24 10 pieces

- 7° 0° 0,7 mm 2,4 mm 718-401-25 10 pieces


- 22° 0° 0,7 mm 2,4 mm 718-401-45 10 pieces

- 17° 0° 0,7 mm 2,4 mm 718-401-44 10 pieces

- 11° + 7° 0,7 mm 2,4 mm 718-441-43 10 pieces

- 1° 0° 1,3 mm 2,2 mm 718-401-42 10 pieces

- 1° 0° 1,3 mm 2,2 mm 718-401-41 10 pieces

- 1° 0° 1,3 mm 2,2 mm 718-401-31 10 pieces

- 1° 0° 1,3 mm 2,2 mm 718-401-32 10 pieces

- 11° + 7° 0,7 mm 2,4 mm 718-441-33 10 pieces

- 17° 0° 0,7 mm 2,4 mm 718-401-34 10 pieces

- 22° 0° 0,7 mm 2,4 mm 718-401-35 10 pieces

Assortments:


Metal Brackets


equilibrium® miniSlot: 0,46 x 0,76 mm / 18 x 30 · Cuspid brackets with hooks


- 7° 0° 0,7 mm 2,4 mm 718-441-15 10 pieces

- 7° 0° 0,7 mm 2,4 mm 718-441-14 10 pieces

- 2° + 13° 0,7 mm 2,4 mm 718-441-13 10 pieces

+ 8° + 9° 1,3 mm 2,2 mm 718-401-12 10 pieces

+ 12° + 5° 0,7 mm 2,4 mm 718-401-11 10 pieces

+ 12° + 5° 0,7 mm 2,4 mm 718-401-21 10 pieces

+ 8° + 9° 1,3 mm 2,2 mm 718-401-22 10 pieces

- 2° + 13° 0,7 mm 2,4 mm 718-441-23 10 pieces

- 7° 0° 0,7 mm 2,4 mm 718-441-24 10 pieces

- 7° 0° 0,7 mm 2,4 mm 718-441-25 10 pieces


- 22° 0° 0,7 mm 2,4 mm 718-441-45 10 pieces

- 17° 0° 0,7 mm 2,4 mm 718-441-44 10 pieces

- 11° + 7° 0,7 mm 2,4 mm 718-441-43 10 pieces

- 1° 0° 1,3 mm 2,2 mm 718-401-42 10 pieces

- 1° 0° 1,3 mm 2,2 mm 718-401-41 10 pieces

- 1° 0° 1,3 mm 2,2 mm 718-401-31 10 pieces

- 1° 0° 1,3 mm 2,2 mm 718-401-32 10 pieces

- 11° + 7° 0,7 mm 2,4 mm 718-441-33 10 pieces

- 17° 0° 0,7 mm 2,4 mm 718-441-34 10 pieces

- 22° 0° 0,7 mm 2,4 mm 718-441-35 10 pieces

Assortments:


equilibrium® miniSlot: 0,46 x 0,76 mm / 18 x 30 · Hooks on cuspid, first bicuspid and second bicuspid brackets






- 7° 0° 0,7 mm 3,1 mm 718-501-15 10 pieces

- 7° 0° 0,7 mm 3,1 mm 718-501-14 10 pieces

- 2° + 13° 0,7 mm 3,1 mm 718-541-13 10 pieces

+ 8° + 9° 1,3 mm 3,0 mm 718-501-12 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 718-501-11 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 718-501-21 10 pieces

+ 8° + 9° 1,3 mm 3,0 mm 718-501-22 10 pieces

- 2° + 13° 0,7 mm 3,1 mm 718-541-23 10 pieces

- 7° 0° 0,7 mm 3,1 mm 718-501-24 10 pieces

- 7° 0° 0,7 mm 3,1 mm 718-501-25 10 pieces


- 22° 0° 0,7 mm 3,1 mm 718-501-45 10 pieces

- 17° 0° 0,7 mm 3,1 mm 718-501-44 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 718-541-43 10 pieces

- 1° 0° 1,3 mm 2,4 mm 718-501-42 10 pieces

- 1° 0° 1,3 mm 2,4 mm 718-501-41 10 pieces

- 1° 0° 1,3 mm 2,4 mm 718-501-31 10 pieces

- 1° 0° 1,3 mm 2,4 mm 718-501-32 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 718-541-33 10 pieces

- 17° 0° 0,7 mm 3,1 mm 718-501-34 10 pieces

- 22° 0° 0,7 mm 3,1 mm 718-501-35 10 pieces

Assortments:


Note: 1 case assortment REF 718-501-02 is equivalent to REF 718-501-01, with additional 4 buccal tubes with vertical hook (1 x 723-028-00 / 1 x 723-032-00 / 2 x 723-026-00)

Metal Brackets


equilibrium® tiSlot: 0,46 x 0,76 mm / 18 x 30 · Cuspid brackets with hooks




Metal Brackets



- 7° 0° 0,7 mm 3,4 mm 790-118-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-118-00 10 pieces

- 2° + 13° 0,7 mm 3,4 mm 790-116-00 10 pieces

+ 8° + 9° 1,3 mm 3,2 mm 790-114-00 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 790-165-00 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 790-166-00 10 pieces

+ 8° + 9° 1,3 mm 3,2 mm 790-115-00 10 pieces

- 2° + 13° 0,7 mm 3,4 mm 790-117-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-118-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-118-00 10 pieces


- 22° 0° 0,7 mm 3,3 mm 790-123-00 10 pieces

- 17° 0° 0,7 mm 3,3 mm 790-122-00 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 790-120-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-119-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-119-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-119-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-119-00 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 790-121-00 10 pieces

- 17° 0° 0,7 mm 3,3 mm 790-122-00 10 pieces

- 22° 0° 0,7 mm 3,3 mm 790-123-00 10 pieces

Assortments:


Note: 1 case assortment REF 891-197-00 is equivalent to REF 891-183-00, with additional 4 buccal tubes (724-268-51 / 724-269-51 / 724-272-51 / 724-273-51)

discovery®



- 7° 0° 0,7 mm 3,4 mm 790-147-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-147-00 10 pieces

- 2° + 13° 0,7 mm 3,4 mm 790-116-00 10 pieces

+ 8° + 9° 1,3 mm 3,2 mm 790-114-00 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 790-165-00 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 790-166-00 10 pieces

+ 8° + 9° 1,3 mm 3,2 mm 790-115-00 10 pieces

- 2° + 13° 0,7 mm 3,4 mm 790-117-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-148-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-148-00 10 pieces


- 22° 0° 0,7 mm 3,3 mm 790-151-00 10 pieces

- 17° 0° 0,7 mm 3,3 mm 790-149-00 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 790-120-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-119-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-119-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-119-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-119-00 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 790-121-00 10 pieces

- 17° 0° 0,7 mm 3,3 mm 790-150-00 10 pieces

- 22° 0° 0,7 mm 3,3 mm 790-152-00 10 pieces

Assortments:


discovery®

Slot: 0,56 x 0,76 mm / 22 x 30 · Hooks on cuspid, first bicuspid and second bicuspid brackets



Metal Brackets



- 7° 0° 0,7 mm 3,4 mm 790-318-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-318-00 10 pieces

- 2° + 13° 0,7 mm 3,4 mm 790-316-00 10 pieces

+ 8° + 9° 1,3 mm 3,2 mm 790-314-00 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 790-365-00 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 790-366-00 10 pieces

+ 8° + 9° 1,3 mm 3,2 mm 790-315-00 10 pieces

- 2° + 13° 0,7 mm 3,4 mm 790-317-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-318-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-318-00 10 pieces


- 22° 0° 0,7 mm 3,4 mm 790-323-00 10 pieces

- 17° 0° 0,7 mm 3,4 mm 790-322-00 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 790-320-00 10 pieces

- 1° 0° 1,3 mm 2,7 mm 790-319-00 10 pieces

- 1° 0° 1,3 mm 2,7 mm 790-319-00 10 pieces

- 1° 0° 1,3 mm 2,7 mm 790-319-00 10 pieces

- 1° 0° 1,3 mm 2,7 mm 790-319-00 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 790-321-00 10 pieces

- 17° 0° 0,7 mm 3,4 mm 790-322-00 10 pieces

- 22° 0° 0,7 mm 3,4 mm 790-323-00 10 pieces

Assortments:


topicSlot: 0,56 x 0,76 mm / 22 x 30 · Cuspid brackets with hooks


- 7° 0° 0,7 mm 3,4 mm 790-347-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-347-00 10 pieces

- 2° + 13° 0,7 mm 3,4 mm 790-316-00 10 pieces

+ 8° + 9° 1,3 mm 3,2 mm 790-314-00 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 790-365-00 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 790-366-00 10 pieces

+ 8° + 9° 1,3 mm 3,2 mm 790-315-00 10 pieces

- 2° + 13° 0,7 mm 3,4 mm 790-317-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-348-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-348-00 10 pieces


- 22° 0° 0,7 mm 3,4 mm 790-351-00 10 pieces

- 17° 0° 0,7 mm 3,4 mm 790-349-00 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 790-320-00 10 pieces

- 1° 0° 1,3 mm 2,7 mm 790-319-00 10 pieces

- 1° 0° 1,3 mm 2,7 mm 790-319-00 10 pieces

- 1° 0° 1,3 mm 2,7 mm 790-319-00 10 pieces

- 1° 0° 1,3 mm 2,7 mm 790-319-00 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 790-321-00 10 pieces

- 17° 0° 0,7 mm 3,4 mm 790-350-00 10 pieces

- 22° 0° 0,7 mm 3,4 mm 790-352-00 10 pieces

Assortments:


topicSlot: 0,56 x 0,76 mm / 22 x 30 · Hooks on cuspid, first bicuspid and second bicuspid brackets




- 7° 0° 0,7 mm 3,1 mm 722-301-15 10 pieces

- 7° 0° 0,7 mm 3,1 mm 722-301-14 10 pieces

- 2° + 13° 0,7 mm 3,1 mm 722-341-13 10 pieces

+ 8° + 9° 1,3 mm 3,0 mm 722-301-12 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 722-301-11 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 722-301-21 10 pieces

+ 8° + 9° 1,3 mm 3,0 mm 722-301-22 10 pieces

- 2° + 13° 0,7 mm 3,1 mm 722-341-23 10 pieces

- 7° 0° 0,7 mm 3,1 mm 722-301-24 10 pieces

- 7° 0° 0,7 mm 3,1 mm 722-301-25 10 pieces


- 22° 0° 0,7 mm 3,1 mm 722-301-45 10 pieces

- 17° 0° 0,7 mm 3,1 mm 722-301-44 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 722-341-43 10 pieces

- 1° 0° 1,3 mm 2,4 mm 722-301-42 10 pieces

- 1° 0° 1,3 mm 2,4 mm 722-301-41 10 pieces

- 1° 0° 1,3 mm 2,4 mm 722-301-31 10 pieces

- 1° 0° 1,3 mm 2,4 mm 722-301-32 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 722-341-33 10 pieces

- 17° 0° 0,7 mm 3,1 mm 722-301-34 10 pieces

- 22° 0° 0,7 mm 3,1 mm 722-301-35 10 pieces

Assortments:


Metal Brackets




- 7° 0° 0,7 mm 3,1 mm 722-341-15 10 pieces

- 7° 0° 0,7 mm 3,1 mm 722-341-14 10 pieces

- 2° + 13° 0,7 mm 3,1 mm 722-341-13 10 pieces

+ 8° + 9° 1,3 mm 3,0 mm 722-301-12 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 722-301-11 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 722-301-21 10 pieces

+ 8° + 9° 1,3 mm 3,0 mm 722-301-22 10 pieces

- 2° + 13° 0,7 mm 3,1 mm 722-341-23 10 pieces

- 7° 0° 0,7 mm 3,1 mm 722-341-24 10 pieces

- 7° 0° 0,7 mm 3,1 mm 722-341-25 10 pieces


- 22° 0° 0,7 mm 3,1 mm 722-341-45 10 pieces

- 17° 0° 0,7 mm 3,1 mm 722-341-44 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 722-341-43 10 pieces

- 1° 0° 1,3 mm 2,4 mm 722-301-42 10 pieces

- 1° 0° 1,3 mm 2,4 mm 722-301-41 10 pieces

- 1° 0° 1,3 mm 2,4 mm 722-301-31 10 pieces

- 1° 0° 1,3 mm 2,4 mm 722-301-32 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 722-341-33 10 pieces

- 17° 0° 0,7 mm 3,1 mm 722-341-34 10 pieces

- 22° 0° 0,7 mm 3,1 mm 722-341-35 10 pieces

Assortments:








- 7° 0° 0,7 mm 2,4 mm 722-401-15 10 pieces

- 7° 0° 0,7 mm 2,4 mm 722-401-14 10 pieces

- 2° + 13° 0,7 mm 2,4 mm 722-441-13 10 pieces

+ 8° + 9° 1,3 mm 2,2 mm 722-401-12 10 pieces

+ 12° + 5° 0,7 mm 2,4 mm 722-401-11 10 pieces

+ 12° + 5° 0,7 mm 2,4 mm 722-401-21 10 pieces

+ 8° + 9° 1,3 mm 2,2 mm 722-401-22 10 pieces

- 2° + 13° 0,7 mm 2,4 mm 722-441-23 10 pieces

- 7° 0° 0,7 mm 2,4 mm 722-401-24 10 pieces

- 7° 0° 0,7 mm 2,4 mm 722-401-25 10 pieces


- 22° 0° 0,7 mm 2,4 mm 722-401-45 10 pieces

- 17° 0° 0,7 mm 2,4 mm 722-401-44 10 pieces

- 11° + 7° 0,7 mm 2,4 mm 722-441-43 10 pieces

- 1° 0° 1,3 mm 2,2 mm 722-401-42 10 pieces

- 1° 0° 1,3 mm 2,2 mm 722-401-41 10 pieces

- 1° 0° 1,3 mm 2,2 mm 722-401-31 10 pieces

- 1° 0° 1,3 mm 2,2 mm 722-401-32 10 pieces

- 11° + 7° 0,7 mm 2,4 mm 722-441-33 10 pieces

- 17° 0° 0,7 mm 2,4 mm 722-401-34 10 pieces

- 22° 0° 0,7 mm 2,4 mm 722-401-35 10 pieces

Assortments:


Metal Brackets




- 7° 0° 0,7 mm 2,4 mm 722-441-15 10 pieces

- 7° 0° 0,7 mm 2,4 mm 722-441-14 10 pieces

- 2° + 13° 0,7 mm 2,4 mm 722-441-13 10 pieces

+ 8° + 9° 1,3 mm 2,2 mm 722-401-12 10 pieces

+ 12° + 5° 0,7 mm 2,4 mm 722-401-11 10 pieces

+ 12° + 5° 0,7 mm 2,4 mm 722-401-21 10 pieces

+ 8° + 9° 1,3 mm 2,2 mm 722-401-22 10 pieces

- 2° + 13° 0,7 mm 2,4 mm 722-441-23 10 pieces

- 7° 0° 0,7 mm 2,4 mm 722-441-24 10 pieces

- 7° 0° 0,7 mm 2,4 mm 722-441-25 10 pieces


- 22° 0° 0,7 mm 2,4 mm 722-441-45 10 pieces

- 17° 0° 0,7 mm 2,4 mm 722-441-44 10 pieces

- 11° + 7° 0,7 mm 2,4 mm 722-441-43 10 pieces

- 1° 0° 1,3 mm 2,2 mm 722-401-42 10 pieces

- 1° 0° 1,3 mm 2,2 mm 722-401-41 10 pieces

- 1° 0° 1,3 mm 2,2 mm 722-401-31 10 pieces

- 1° 0° 1,3 mm 2,2 mm 722-401-32 10 pieces

- 11° + 7° 0,7 mm 2,4 mm 722-441-33 10 pieces

- 17° 0° 0,7 mm 2,4 mm 722-441-34 10 pieces

- 22° 0° 0,7 mm 2,4 mm 722-441-35 10 pieces

Assortments:








- 7° 0° 0,7 mm 3,1 mm 722-501-15 10 pieces

- 7° 0° 0,7 mm 3,1 mm 722-501-14 10 pieces

- 2° + 13° 0,7 mm 3,1 mm 722-541-13 10 pieces

+ 8° + 9° 1,3 mm 3,0 mm 722-501-12 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 722-501-11 10 pieces

+ 12° + 5° 0,7 mm 3,4 mm 722-501-21 10 pieces

+ 8° + 9° 1,3 mm 3,0 mm 722-501-22 10 pieces

- 2° + 13° 0,7 mm 3,1 mm 722-541-23 10 pieces

- 7° 0° 0,7 mm 3,1 mm 722-501-24 10 pieces

- 7° 0° 0,7 mm 3,1 mm 722-501-25 10 pieces


- 22° 0° 0,7 mm 3,1 mm 722-501-45 10 pieces

- 17° 0° 0,7 mm 3,1 mm 722-501-44 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 722-541-43 10 pieces

- 1° 0° 1,3 mm 2,4 mm 722-501-42 10 pieces

- 1° 0° 1,3 mm 2,4 mm 722-501-41 10 pieces

- 1° 0° 1,3 mm 2,4 mm 722-501-31 10 pieces

- 1° 0° 1,3 mm 2,4 mm 722-501-32 10 pieces

- 11° + 7° 0,7 mm 3,1 mm 722-541-33 10 pieces

- 17° 0° 0,7 mm 3,1 mm 722-501-34 10 pieces

- 22° 0° 0,7 mm 3,1 mm 722-501-35 10 pieces

Assortments:


Note: 1 case assortment REF 722-501-02 is equivalent to REF 722-501-01, with additional 4 buccal tubes with vertical hook (1 x 723-029-00 / 1 x 723-033-00 / 2 x 723-027-00)

Metal Brackets







- 7° 0° 1,2 mm 3,1 mm 718-302-15 10 pieces

- 7° 0° 0,7 mm 3,1 mm 718-302-14 10 pieces

0° + 8° 0,7 mm 3,1 mm 718-342-13 10 pieces

+ 10° + 8° 1,3 mm 3,0 mm 718-302-12 10 pieces

+ 17° + 4° 0,7 mm 3,4 mm 718-302-11 10 pieces

+ 17° + 4° 0,7 mm 3,4 mm 718-302-21 10 pieces

+ 10° + 8° 1,3 mm 3,0 mm 718-302-22 10 pieces

0° + 8° 0,7 mm 3,1 mm 718-342-23 10 pieces

- 7° 0° 0,7 mm 3,1 mm 718-302-24 10 pieces

- 7° 0° 1,2 mm 3,1 mm 718-302-25 10 pieces


- 17° + 2° 0,7 mm 3,1 mm 718-302-45 10 pieces

- 12° + 2° 0,7 mm 3,1 mm 718-302-44 10 pieces

0° + 3° 0,7 mm 3,1 mm 718-342-43 10 pieces

- 6° 0° 1,3 mm 2,4 mm 718-302-42 10 pieces

- 6° 0° 1,3 mm 2,4 mm 718-302-41 10 pieces

- 6° 0° 1,3 mm 2,4 mm 718-302-31 10 pieces

- 6° 0° 1,3 mm 2,4 mm 718-302-32 10 pieces

0° + 3° 0,7 mm 3,1 mm 718-342-33 10 pieces

- 12° + 2° 0,7 mm 3,1 mm 718-302-34 10 pieces

- 17° + 2° 0,7 mm 3,1 mm 718-302-35 10 pieces

Assortments:


* The Dentaurum version of this prescription is not claimed to be a dupli-cation of any other, nor does Dentaurum imply that it is endorsed in any way by Drs. McLaughlin, Bennett and Trevisi.

Metal Brackets

McLaughlin-Bennett-Trevisi* 18 / Assortments



- 7° 0° 1,2 mm 3,1 mm 718-342-15 10 pieces

- 7° 0° 0,7 mm 3,1 mm 718-342-14 10 pieces

0° + 8° 0,7 mm 3,1 mm 718-342-13 10 pieces

+ 10° + 8° 1,3 mm 3,0 mm 718-302-12 10 pieces

+ 17° + 4° 0,7 mm 3,4 mm 718-302-11 10 pieces

+ 17° + 4° 0,7 mm 3,4 mm 718-302-21 10 pieces

+ 10° + 8° 1,3 mm 3,0 mm 718-302-22 10 pieces

0° + 8° 0,7 mm 3,1 mm 718-342-23 10 pieces

- 7° 0° 0,7 mm 3,1 mm 718-342-24 10 pieces

- 7° 0° 1,2 mm 3,1 mm 718-342-25 10 pieces


- 17° + 2° 0,7 mm 3,1 mm 718-342-45 10 pieces

- 12° + 2° 0,7 mm 3,1 mm 718-342-44 10 pieces

0° + 3° 0,7 mm 3,1 mm 718-342-43 10 pieces

- 6° 0° 1,3 mm 2,4 mm 718-302-42 10 pieces

- 6° 0° 1,3 mm 2,4 mm 718-302-41 10 pieces

- 6° 0° 1,3 mm 2,4 mm 718-302-31 10 pieces

- 6° 0° 1,3 mm 2,4 mm 718-302-32 10 pieces

0° + 3° 0,7 mm 3,1 mm 718-342-33 10 pieces

- 12° + 2° 0,7 mm 3,1 mm 718-342-34 10 pieces

- 17° + 2° 0,7 mm 3,1 mm 718-342-35 10 pieces

Assortments:








- 7° 0° 1,2 mm 3,1 mm 718-502-15 10 pieces

- 7° 0° 0,7 mm 3,1 mm 718-502-14 10 pieces

0° + 8° 0,7 mm 3,1 mm 718-542-13 10 pieces

+ 10° + 8° 1,3 mm 3,0 mm 718-502-12 10 pieces

+ 17° + 4° 0,7 mm 3,4 mm 718-502-11 10 pieces

+ 17° + 4° 0,7 mm 3,4 mm 718-502-21 10 pieces

+ 10° + 8° 1,3 mm 3,0 mm 718-502-22 10 pieces

0° + 8° 0,7 mm 3,1 mm 718-542-23 10 pieces

- 7° 0° 0,7 mm 3,1 mm 718-502-24 10 pieces

- 7° 0° 1,2 mm 3,1 mm 718-502-25 10 pieces


- 17° + 2° 0,7 mm 3,1 mm 718-502-45 10 pieces

- 12° + 2° 0,7 mm 3,1 mm 718-502-44 10 pieces

0° + 3° 0,7 mm 3,1 mm 718-542-43 10 pieces

- 6° 0° 1,3 mm 2,4 mm 718-502-42 10 pieces

- 6° 0° 1,3 mm 2,4 mm 718-502-41 10 pieces

- 6° 0° 1,3 mm 2,4 mm 718-502-31 10 pieces

- 6° 0° 1,3 mm 2,4 mm 718-502-32 10 pieces

0° + 3° 0,7 mm 3,1 mm 718-542-33 10 pieces

- 12° + 2° 0,7 mm 3,1 mm 718-502-34 10 pieces

- 17° + 2° 0,7 mm 3,1 mm 718-502-35 10 pieces

Assortments:


* The Dentaurum version of this prescription is not claimed to be a dupli-cation of any other, nor does Dentaurum imply that it is endorsed in any way by Drs. McLaughlin, Bennett and Trevisi. Note: 1 case assortment REF 718-502-02 is equivalent to REF 718-502-01, with additional 4 buccal tubes with vertical hook (1 x 723-028-00 / 1 x 723-032-00 / 2 x 723-030-00)

Metal Brackets






- 7° 0° 1,2 mm 3,1 mm 722-302-15 10 pieces

- 7° 0° 0,7 mm 3,1 mm 722-302-14 10 pieces

0° + 8° 0,7 mm 3,1 mm 722-342-13 10 pieces

+ 10° + 8° 1,3 mm 3,0 mm 722-302-12 10 pieces

+ 17° + 4° 0,7 mm 3,4 mm 722-302-11 10 pieces

+ 17° + 4° 0,7 mm 3,4 mm 722-302-21 10 pieces

+ 10° + 8° 1,3 mm 3,0 mm 722-302-22 10 pieces

0° + 8° 0,7 mm 3,1 mm 722-342-23 10 pieces

- 7° 0° 0,7 mm 3,1 mm 722-302-24 10 pieces

- 7° 0° 1,2 mm 3,1 mm 722-302-25 10 pieces


- 17° + 2° 0,7 mm 3,1 mm 722-302-45 10 pieces

- 12° + 2° 0,7 mm 3,1 mm 722-302-44 10 pieces

0° + 3° 0,7 mm 3,1 mm 722-342-43 10 pieces

- 6° 0° 1,3 mm 2,4 mm 722-302-42 10 pieces

- 6° 0° 1,3 mm 2,4 mm 722-302-41 10 pieces

- 6° 0° 1,3 mm 2,4 mm 722-302-31 10 pieces

- 6° 0° 1,3 mm 2,4 mm 722-302-32 10 pieces

0° + 3° 0,7 mm 3,1 mm 722-342-33 10 pieces

- 12° + 2° 0,7 mm 3,1 mm 722-302-34 10 pieces

- 17° + 2° 0,7 mm 3,1 mm 722-302-35 10 pieces

Assortments:



Metal Brackets




- 7° 0° 1,2 mm 3,1 mm 722-342-15 10 pieces

- 7° 0° 0,7 mm 3,1 mm 722-342-14 10 pieces

0° + 8° 0,7 mm 3,1 mm 722-342-13 10 pieces

+ 10° + 8° 1,3 mm 3,0 mm 722-302-12 10 pieces

+ 17° + 4° 0,7 mm 3,4 mm 722-302-11 10 pieces

+ 17° + 4° 0,7 mm 3,4 mm 722-302-21 10 pieces

+ 10° + 8° 1,3 mm 3,0 mm 722-302-22 10 pieces

0° + 8° 0,7 mm 3,1 mm 722-342-23 10 pieces

- 7° 0° 0,7 mm 3,1 mm 722-342-24 10 pieces

- 7° 0° 1,2 mm 3,1 mm 722-342-25 10 pieces


- 17° + 2° 0,7 mm 3,1 mm 722-342-45 10 pieces

- 12° + 2° 0,7 mm 3,1 mm 722-342-44 10 pieces

0° + 3° 0,7 mm 3,1 mm 722-342-43 10 pieces

- 6° 0° 1,3 mm 2,4 mm 722-302-42 10 pieces

- 6° 0° 1,3 mm 2,4 mm 722-302-41 10 pieces

- 6° 0° 1,3 mm 2,4 mm 722-302-31 10 pieces

- 6° 0° 1,3 mm 2,4 mm 722-302-32 10 pieces

0° + 3° 0,7 mm 3,1 mm 722-342-33 10 pieces

- 12° + 2° 0,7 mm 3,1 mm 722-342-34 10 pieces

- 17° + 2° 0,7 mm 3,1 mm 722-342-35 10 pieces

Assortments:








- 7° 0° 1,2 mm 2,4 mm 722-402-15 10 pieces

- 7° 0° 0,7 mm 2,4 mm 722-402-14 10 pieces

0° + 8° 0,7 mm 2,4 mm 722-442-13 10 pieces

+ 10° + 8° 1,3 mm 2,2 mm 722-402-12 10 pieces

+ 17° + 4° 0,7 mm 2,4 mm 722-402-11 10 pieces

+ 17° + 4° 0,7 mm 2,4 mm 722-402-21 10 pieces

+ 10° + 8° 1,3 mm 2,2 mm 722-402-22 10 pieces

0° + 8° 0,7 mm 2,4 mm 722-442-23 10 pieces

- 7° 0° 0,7 mm 2,4 mm 722-402-24 10 pieces

- 7° 0° 1,2 mm 2,4 mm 722-402-25 10 pieces


- 17° + 2° 0,7 mm 2,4 mm 722-402-45 10 pieces

- 12° + 2° 0,7 mm 2,4 mm 722-402-44 10 pieces

0° + 3° 0,7 mm 2,4 mm 722-442-43 10 pieces

- 6° 0° 1,3 mm 2,2 mm 722-402-42 10 pieces

- 6° 0° 1,3 mm 2,2 mm 722-402-41 10 pieces

- 6° 0° 1,3 mm 2,2 mm 722-402-31 10 pieces

- 6° 0° 1,3 mm 2,2 mm 722-402-32 10 pieces

0° + 3° 0,7 mm 2,4 mm 722-442-33 10 pieces

- 12° + 2° 0,7 mm 2,4 mm 722-402-34 10 pieces

- 17° + 2° 0,7 mm 2,4 mm 722-402-35 10 pieces

Assortments:



Metal Brackets




- 7° 0° 1,2 mm 2,4 mm 722-442-15 10 pieces

- 7° 0° 0,7 mm 2,4 mm 722-442-14 10 pieces

0° + 8° 0,7 mm 2,4 mm 722-442-13 10 pieces

+ 10° + 8° 1,3 mm 2,2 mm 722-402-12 10 pieces

+ 17° + 4° 0,7 mm 2,4 mm 722-402-11 10 pieces

+ 17° + 4° 0,7 mm 2,4 mm 722-402-21 10 pieces

+ 10° + 8° 1,3 mm 2,2 mm 722-402-22 10 pieces

0° + 8° 0,7 mm 2,4 mm 722-442-23 10 pieces

- 7° 0° 0,7 mm 2,4 mm 722-442-24 10 pieces

- 7° 0° 1,2 mm 2,4 mm 722-442-25 10 pieces


- 17° + 2° 0,7 mm 2,4 mm 722-442-45 10 pieces

- 12° + 2° 0,7 mm 2,4 mm 722-442-44 10 pieces

0° + 3° 0,7 mm 2,4 mm 722-442-43 10 pieces

- 6° 0° 1,3 mm 2,2 mm 722-402-42 10 pieces

- 6° 0° 1,3 mm 2,2 mm 722-402-41 10 pieces

- 6° 0° 1,3 mm 2,2 mm 722-402-31 10 pieces

- 6° 0° 1,3 mm 2,2 mm 722-402-32 10 pieces

0° + 3° 0,7 mm 2,4 mm 722-442-33 10 pieces

- 12° + 2° 0,7 mm 2,4 mm 722-442-34 10 pieces

- 17° + 2° 0,7 mm 2,4 mm 722-442-35 10 pieces

Assortments:








- 7° 0° 1,2 mm 3,1 mm 722-502-15 10 pieces

- 7° 0° 0,7 mm 3,1 mm 722-502-14 10 pieces

0° + 8° 0,7 mm 3,1 mm 722-542-13 10 pieces

+ 10° + 8° 1,3 mm 3,0 mm 722-502-12 10 pieces

+ 17° + 4° 0,7 mm 3,4 mm 722-502-11 10 pieces

+ 17° + 4° 0,7 mm 3,4 mm 722-502-21 10 pieces

+ 10° + 8° 1,3 mm 3,0 mm 722-502-22 10 pieces

0° + 8° 0,7 mm 3,1 mm 722-542-23 10 pieces

- 7° 0° 0,7 mm 3,1 mm 722-502-24 10 pieces

- 7° 0° 1,2 mm 3,1 mm 722-502-25 10 pieces


- 17° + 2° 0,7 mm 3,1 mm 722-502-45 10 pieces

- 12° + 2° 0,7 mm 3,1 mm 722-502-44 10 pieces

0° + 3° 0,7 mm 3,1 mm 722-542-43 10 pieces

- 6° 0° 1,3 mm 2,4 mm 722-502-42 10 pieces

- 6° 0° 1,3 mm 2,4 mm 722-502-41 10 pieces

- 6° 0° 1,3 mm 2,4 mm 722-502-31 10 pieces

- 6° 0° 1,3 mm 2,4 mm 722-502-32 10 pieces

0° + 3° 0,7 mm 3,1 mm 722-542-33 10 pieces

- 12° + 2° 0,7 mm 3,1 mm 722-502-34 10 pieces

- 17° + 2° 0,7 mm 3,1 mm 722-502-35 10 pieces

Assortments:


* The Dentaurum version of this prescription is not claimed to be a dupli-cation of any other, nor does Dentaurum imply that it is endorsed in any way by Drs. McLaughlin, Bennett and Trevisi. Note: 1 case assortment REF 722-502-02 is equivalent to REF 722-502-01, with additional 4 buccal tubes with vertical hook (1 x 723-029-00 / 1 x 723-033-00 / 2 x 723-031-00)

Metal Brackets






- 7° 0° 0,7 mm 3,4 mm 790-106-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-106-00 10 pieces

+ 7° + 5° 0,7 mm 3,4 mm 790-134-00 10 pieces

+ 14° + 8° 0,7 mm 3,2 mm 790-132-00 10 pieces

+ 22° + 5° 0,7 mm 3,8 mm 790-130-00 10 pieces

+ 22° + 5° 0,7 mm 3,8 mm 790-131-00 10 pieces

+ 14° + 8° 0,7 mm 3,2 mm 790-133-00 10 pieces

+ 7° + 5° 0,7 mm 3,4 mm 790-135-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-106-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-106-00 10 pieces


- 17° 0° 0,7 mm 3,3 mm 790-110-00 10 pieces

- 11° 0° 0,7 mm 3,3 mm 790-128-00 10 pieces

+ 7° + 5° 0,7 mm 3,1 mm 790-138-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-107-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-107-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-107-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-107-00 10 pieces

+ 7° + 5° 0,7 mm 3,1 mm 790-139-00 10 pieces

- 11° 0° 0,7 mm 3,3 mm 790-128-00 10 pieces

- 17° 0° 0,7 mm 3,3 mm 790-110-00 10 pieces

Assortments:


Metal Brackets

Ricketts® 18 - IV. Dimension / Assortments

discovery®


Dentaurum’s version of Ricketts® is not claimed to be a duplication of any other, nor does Dentaurum imply that it is endorsed in any way by Dr. Ricketts.




0° 0° 0,7 mm 3,1 mm 718-303-15 10 pieces

0° 0° 0,7 mm 3,1 mm 718-303-14 10 pieces

+ 7° + 5° 0,7 mm 3,1 mm 718-303-13 10 pieces

+ 14° + 8° 0,7 mm 2,9 mm 718-303-12 10 pieces

+ 22° 0° 0,7 mm 3,3 mm 718-303-11 10 pieces

+ 22° 0° 0,7 mm 3,3 mm 718-303-21 10 pieces

+ 14° + 8° 0,7 mm 2,9 mm 718-303-22 10 pieces

+ 7° + 5° 0,7 mm 3,1 mm 718-303-23 10 pieces

0° 0° 0,7 mm 3,1 mm 718-303-24 10 pieces

0° 0° 0,7 mm 3,1 mm 718-303-25 10 pieces


0° 0° 0,7 mm 3,1 mm 718-303-45 10 pieces

0° 0° 0,7 mm 3,1 mm 718-303-44 10 pieces

+ 7° + 5° 0,7 mm 2,7 mm 718-303-43 10 pieces

0° 0° 0,7 mm 2,3 mm 718-303-42 10 pieces

0° 0° 0,7 mm 2,3 mm 718-303-41 10 pieces

0° 0° 0,7 mm 2,3 mm 718-303-31 10 pieces

0° 0° 0,7 mm 2,3 mm 718-303-32 10 pieces

+ 7° + 5° 0,7 mm 2,7 mm 718-303-33 10 pieces

0° 0° 0,7 mm 3,1 mm 718-303-34 10 pieces

0° 0° 0,7 mm 3,1 mm 718-303-35 10 pieces

Assortments:


Metal Brackets

Ricketts® Universal 18 / Assortments

equilibrium® 2Slot: 0,46 x 0,76 mm / 18 x 30 · ohne Hook


0° 0° 0,7 mm 3,3 mm 790-136-00 10 pieces

0° 0° 0,7 mm 3,3 mm 790-136-00 10 pieces

+ 7° + 5° 0,7 mm 3,4 mm 790-134-00 10 pieces

+ 14° + 8° 0,7 mm 3,2 mm 790-132-00 10 pieces

+ 22° + 5° 0,7 mm 3,8 mm 790-130-00 10 pieces

+ 22° + 5° 0,7 mm 3,8 mm 790-131-00 10 pieces

+ 14° + 8° 0,7 mm 3,2 mm 790-133-00 10 pieces

+ 7° + 5° 0,7 mm 3,4 mm 790-135-00 10 pieces

0° 0° 0,7 mm 3,3 mm 790-136-00 10 pieces

0° 0° 0,7 mm 3,3 mm 790-136-00 10 pieces


- 14° 0° 0,7 mm 3,3 mm 790-140-00 10 pieces

0° 0° 0,7 mm 3,3 mm 790-136-00 10 pieces

+ 7° + 5° 0,7 mm 3,1 mm 790-138-00 10 pieces

0° 0° 0,7 mm 2,6 mm 790-137-00 10 pieces

0° 0° 0,7 mm 2,6 mm 790-137-00 10 pieces

0° 0° 0,7 mm 2,6 mm 790-137-00 10 pieces

0° 0° 0,7 mm 2,6 mm 790-137-00 10 pieces

+ 7° + 5° 0,7 mm 3,1 mm 790-139-00 10 pieces

0° 0° 0,7 mm 3,3 mm 790-136-00 10 pieces

- 14° 0° 0,7 mm 3,3 mm 790-140-00 10 pieces

Assortments:


discovery®



Dentaurum’s version of Ricketts® is not claimed to be a duplication of any other, nor does Dentaurum imply that it is endorsed in any way by Dr. Ricketts.




- 7° 0° 0,7 mm 3,4 mm 790-106-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-106-00 10 pieces

+ 7° + 5° 0,7 mm 3,4 mm 790-134-00 10 pieces

+ 14° + 8° 0,7 mm 3,2 mm 790-132-00 10 pieces

+ 22° + 5° 0,7 mm 3,8 mm 790-130-00 10 pieces

+ 22° + 5° 0,7 mm 3,8 mm 790-131-00 10 pieces

+ 14° + 8° 0,7 mm 3,2 mm 790-133-00 10 pieces

+ 7° + 5° 0,7 mm 3,4 mm 790-135-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-106-00 10 pieces

- 7° 0° 0,7 mm 3,4 mm 790-106-00 10 pieces


- 17° 0° 0,7 mm 3,3 mm 790-110-00 10 pieces

- 11° 0° 0,7 mm 3,3 mm 790-128-00 10 pieces

+ 7° + 5° 0,7 mm 3,1 mm 790-138-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-107-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-107-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-107-00 10 pieces

- 1° 0° 1,3 mm 2,6 mm 790-107-00 10 pieces

+ 7° + 5° 0,7 mm 3,1 mm 790-139-00 10 pieces

- 11° 0° 0,7 mm 3,3 mm 790-128-00 10 pieces

- 17° 0° 0,7 mm 3,3 mm 790-110-00 10 pieces

Assortments:


Metal Brackets

Hilgers 18 / Assortments

discovery®


Dentaurum’s version of Hilgers is not claimed to be a duplication of any other, nor does Dentaurum imply that it is endorsed in any way by Dr. Hilgers.



0° 0° 0,7 mm 3,1 mm 790-602-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-602-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-602-01 10 pieces

0° 0° 0,7 mm 3,0 mm 790-601-01 10 pieces

0° 0° 0,7 mm 3,4 mm 790-600-01 10 pieces

0° 0° 0,7 mm 3,4 mm 790-600-01 10 pieces

0° 0° 0,7 mm 3,0 mm 790-601-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-602-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-602-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-602-01 10 pieces


0° 0° 0,7 mm 3,1 mm 790-602-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-602-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-602-01 10 pieces

0° 0° 0,7 mm 2,4 mm 790-603-01 10 pieces

0° 0° 0,7 mm 2,4 mm 790-603-01 10 pieces

0° 0° 0,7 mm 2,4 mm 790-603-01 10 pieces

0° 0° 0,7 mm 2,4 mm 790-603-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-602-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-602-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-602-01 10 pieces

Assortments:


Metal Brackets

Standard Edgewise 18 / Assortments

equilibrium® 2Slot: 0,46 x 0,76 mm / 18 x 30 · without hooks



0° 0° 0,7 mm 3,1 mm 790-606-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-606-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-606-01 10 pieces

0° 0° 0,7 mm 3,0 mm 790-605-01 10 pieces

0° 0° 0,7 mm 3,4 mm 790-604-01 10 pieces

0° 0° 0,7 mm 3,4 mm 790-604-01 10 pieces

0° 0° 0,7 mm 3,0 mm 790-605-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-606-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-606-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-606-01 10 pieces


0° 0° 0,7 mm 3,1 mm 790-606-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-606-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-606-01 10 pieces

0° 0° 0,7 mm 2,4 mm 790-607-01 10 pieces

0° 0° 0,7 mm 2,4 mm 790-607-01 10 pieces

0° 0° 0,7 mm 2,4 mm 790-607-01 10 pieces

0° 0° 0,7 mm 2,4 mm 790-607-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-606-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-606-01 10 pieces

0° 0° 0,7 mm 3,1 mm 790-606-01 10 pieces

Assortments:


Metal Brackets

Standard Edgewise 22 / Assortments




0° 0° 0,7 mm 2,5 mm 790-609-01 10 pieces

0° 0° 0,7 mm 2,5 mm 790-609-01 10 pieces

0° 0° 0,7 mm 2,5 mm 790-609-01 10 pieces

0° 0° 0,7 mm 2,5 mm 790-608-01 10 pieces

0° 0° 0,7 mm 2,5 mm 790-608-01 10 pieces

0° 0° 0,7 mm 2,5 mm 790-608-01 10 pieces

0° 0° 0,7 mm 2,5 mm 790-608-01 10 pieces

0° 0° 0,7 mm 2,5 mm 790-609-01 10 pieces

0° 0° 0,7 mm 2,5 mm 790-609-01 10 pieces

0° 0° 0,7 mm 2,5 mm 790-609-01 10 pieces


0° 0° 0,7 mm 2,5 mm 790-609-01 10 pieces

0° 0° 0,7 mm 2,5 mm 790-609-01 10 pieces

0° 0° 0,7 mm 2,5 mm 790-609-01 10 pieces

0° 0° 0,7 mm 2,0 mm 790-610-01 10 pieces

0° 0° 0,7 mm 2,0 mm 790-610-01 10 pieces

0° 0° 0,7 mm 2,0 mm 790-610-01 10 pieces

0° 0° 0,7 mm 2,0 mm 790-610-01 10 pieces

0° 0° 0,7 mm 2,5 mm 790-609-01 10 pieces

0° 0° 0,7 mm 2,5 mm 790-609-01 10 pieces

0° 0° 0,7 mm 2,5 mm 790-609-01 10 pieces

Assortments:


Metal Brackets

Tweed 22 / Assortments



Metal Brackets

discovery® / Single Packsfor individual systems

Straight Wire Technique 18Slot: 0,46 x 0,76 mm / 18 x 30 Teeth Torque Angulation In/Out Hook Width REF Quantity 11 + 12° + 5° 0,7 mm 3,8 mm 790-100-00 10 pieces 21 + 12° + 5° 0,7 mm 3,8 mm 790-101-00 10 pieces 13 790-155-00 10 pieces 23 790-156-00 10 pieces

Teeth Torque Angulation In/Out Hook Width REF Quantity 42-41/31-32 - 10° 0° 1,3 mm 2,6 mm 790-153-00 10 pieces

Straight Wire Technique 22Slot: 0,56 x 0,76 mm / 22 x 30 Teeth Torque Angulation In/Out Hook Width REF Quantity 11 + 12° + 5° 0,7 mm 3,8 mm 790-112-00 10 pieces 21 + 12° + 5° 0,7 mm 3,8 mm 790-113-00 10 pieces 11 + 22° + 5° 0,7 mm 3,8 mm 790-124-00 10 pieces 21 + 22° + 5° 0,7 mm 3,8 mm 790-125-00 10 pieces 12 + 14° + 8° 1,3 mm 3,2 mm 790-161-00 10 pieces 22 + 14° + 8° 1,3 mm 3,2 mm 790-162-00 10 pieces 13 790-157-00 10 pieces 23 790-158-00 10 pieces

Teeth Torque Angulation In/Out Hook Width REF Quantity 42-41/31-32 - 10° 0° 1,3 mm 2,6 mm 790-154-00 10 pieces

Teeth Torque Angulation In/Out Hook Width REF Quantity 13/33 790-159-00 10 pieces 23/43 790-160-00 10 pieces


Metal Brackets

topic / Single Packsfor individual systems

Straight Wire Technique 18Slot: 0,46 x 0,76 mm / 18 x 30 Teeth Torque Angulation In/Out Hook Width REF Quantity 11 + 12° + 5° 0,7 mm 3,9 mm 790-300-00 10 pieces 21 + 12° + 5° 0,7 mm 3,9 mm 790-301-00 10 pieces

Straight Wire Technique 22Slot: 0,56 x 0,76 mm / 22 x 30 Teeth Torque Angulation In/Out Hook Width REF Quantity 11 + 12° + 5° 0,7 mm 3,9 mm 790-312-00 10 pieces 21 + 12° + 5° 0,7 mm 3,9 mm 790-313-00 10 pieces


Straight Wire Technique 18Slot: 0,46 x 0,76 mm / 18 x 30

Metal Brackets

equilibrium® 2 / Single Packsfor individual systems

Teeth Torque Angulation In/Out Hook Width REF Quantity 13 - 2° + 13° 0,7 mm 3,1 mm 718-301-13 10 pieces 23 - 2° + 13° 0,7 mm 3,1 mm 718-301-23 10 pieces


Teeth Torque Angulation In/Out Hook Width REF Quantity 43 - 11° + 7° 0,7 mm 3,1 mm 718-301-43 10 pieces 33 - 11° + 7° 0,7 mm 3,1 mm 718-301-33 10 pieces


Straight Wire Technique 22Slot: 0,56 x 0,76 mm / 22 x 30 Teeth Torque Angulation In/Out Hook Width REF Quantity 13 - 2° + 13° 0,7 mm 3,1 mm 722-301-13 10 pieces 23 - 2° + 13° 0,7 mm 3,1 mm 722-301-23 10 pieces 13 - 7° + 8° 0,7 mm 3,1 mm 722-360-13 10 pieces 23 - 7° + 8° 0,7 mm 3,1 mm 722-360-23 10 pieces


Teeth Torque Angulation In/Out Hook Width REF Quantity 43 - 11° + 7° 0,7 mm 3,1 mm 722-301-43 10 pieces 33 - 11° + 7° 0,7 mm 3,1 mm 722-301-33 10 pieces 43 - 6° + 3° 0,7 mm 3,1 mm 722-361-43 10 pieces 33 - 6° + 3° 0,7 mm 3,1 mm 722-361-33 10 pieces



equilibrium® 2 Banding Technique 18Slot: 0,46 x 0,76 mm / 18 x 30

Metal Brackets

Brackets / Banding Technique

Teeth Torque Angulation In/Out Hook Width REF Quantity 13 790-274-02 10 pieces 13 - 2° + 13° 0,7 mm 3,1 mm 790-259-02 10 pieces 13 790-204-02 10 pieces 23 790-275-02 10 pieces 23 - 2° + 13° 0,7 mm 3,1 mm 790-260-02 10 pieces 23 790-205-02 10 pieces 15-14/24-25 - 7° 0° 0,7 mm 3,1 mm 790-206-02 10 pieces 15-14 790-249-02 10 pieces 24-25 790-250-02 10 pieces 15/25 - 7° 0° 1,2 mm 3,1 mm 790-276-02 10 pieces 15 790-284-02 10 pieces 25 790-285-02 10 pieces 13/24-25 790-290-02 10 pieces 15-14/23 790-291-02 10 pieces

Teeth Torque Angulation In/Out Hook Width REF Quantity 42-41/31-32 0° 0° 0,7 mm 2,4 mm 790-603-02 10 pieces 42-41/31-32 - 1° 0° 1,3 mm 2,4 mm 790-207-02 10 pieces 42-41/31-32 - 6° 0° 1,3 mm 2,4 mm 790-277-02 10 pieces 43 790-278-02 10 pieces 43 - 11° + 7° 0,7 mm 3,1 mm 790-261-02 10 pieces 43 790-208-02 10 pieces 33 790-279-02 10 pieces 33 - 11° + 7° 0,7 mm 3,1 mm 790-262-02 10 pieces 33 790-209-02 10 pieces 44/34 - 17° 0° 0,7 mm 3,1 mm 790-210-02 10 pieces 44 - 12° + 2° 0,7 mm 3,1 mm 790-280-02 10 pieces 44 790-286-02 10 pieces 44 790-251-02 10 pieces 34 - 12° + 2° 0,7 mm 3,1 mm 790-281-02 10 pieces 34 790-287-02 10 pieces 34 790-252-02 10 pieces 45/35 - 22° 0° 0,7 mm 3,1 mm 790-211-02 10 pieces 45 - 17° + 2° 0,7 mm 3,1 mm 790-282-02 10 pieces 45 790-288-02 10 pieces 45 790-253-02 10 pieces 35 - 17° + 2° 0,7 mm 3,1 mm 790-283-02 10 pieces 35 790-289-02 10 pieces 35 790-254-02 10 pieces

Teeth Torque Angulation In/Out Hook Width REF Quantity 15-13/23-25/45-43/33-35 0° 0° 0,7 mm 3,1 mm 790-602-02 10 pieces


equilibrium® 2 Banding Technique 22Slot: 0,56 x 0,76 mm / 22 x 30

Metal Brackets

Brackets / Banding Technique

Teeth Torque Angulation In/Out Hook Width REF Quantity 13 790-228-02 10 pieces 13 - 2° + 13° 0,7 mm 3,1 mm 790-263-02 10 pieces 13 790-216-02 10 pieces 13 - 7° + 8° 0,7 mm 3,1 mm 790-230-02 10 pieces 23 790-229-02 10 pieces 23 - 2° + 13° 0,7 mm 3,1 mm 790-264-02 10 pieces 23 790-217-02 10 pieces 23 - 7° + 8° 0,7 mm 3,1 mm 790-231-02 10 pieces 15-14/24-25 - 7° 0° 0,7 mm 3,1 mm 790-218-02 10 pieces 15-14 790-243-02 10 pieces 24-25 790-244-02 10 pieces 15/25 - 7° 0° 1,2 mm 3,1 mm 790-267-02 10 pieces 15 790-268-02 10 pieces 25 790-269-02 10 pieces 13/24-25 790-292-02 10 pieces 15-14/23 790-293-02 10 pieces

Teeth Torque Angulation In/Out Hook Width REF Quantity 42-41/31-32 0° 0° 0,7 mm 2,4 mm 790-607-02 10 pieces 42-41/31-32 - 1° 0° 1,3 mm 2,4 mm 790-219-02 10 pieces 42-41/31-32 - 6° 0° 1,3 mm 2,4 mm 790-233-02 10 pieces 43 790-234-02 10 pieces 43 - 6° + 3° 0,7 mm 3,1 mm 790-236-02 10 pieces 43 - 11° + 7° 0,7 mm 3,1 mm 790-265-02 10 pieces 43 790-220-02 10 pieces 33 790-235-02 10 pieces 33 - 6° + 3° 0,7 mm 3,1 mm 790-237-02 10 pieces 33 - 11° + 7° 0,7 mm 3,1 mm 790-266-02 10 pieces 33 790-221-02 10 pieces 44/34 - 17° 0° 0,7 mm 3,1 mm 790-222-02 10 pieces 44 - 12° + 2° 0,7 mm 3,1 mm 790-239-02 10 pieces 44 790-245-02 10 pieces 44 790-255-02 10 pieces 34 - 12° + 2° 0,7 mm 3,1 mm 790-240-02 10 pieces 34 790-246-02 10 pieces 34 790-256-02 10 pieces 45/35 - 22° 0° 0,7 mm 3,1 mm 790-223-02 10 pieces 45-43 790-294-02 10 pieces 45 - 17° + 2° 0,7 mm 3,1 mm 790-241-02 10 pieces 45 790-247-02 10 pieces 45 790-257-02 10 pieces 35 - 17° + 2° 0,7 mm 3,1 mm 790-242-02 10 pieces 35 790-248-02 10 pieces 35 790-258-02 10 pieces 33-35 790-295-02 10 pieces

Teeth Torque Angulation In/Out Hook Width REF Quantity 15-13/23-25/45-43/33-35 0° 0° 0,7 mm 3,1 mm 790-606-02 10 pieces

equilibrium® 2 Tweed 22Slot: 0,56 x 0,76 mm / 22 x 30 Teeth Torque Angulation In/Out Hook Width REF Quantity 42-41/31-32 0° 0° 0,7 mm 2,0 mm 790-610-02 10 pieces

Teeth Torque Angulation In/Out Hook Width REF Quantity 15-13/23-25/45-43/33-35 0° 0° 0,7 mm 2,5 mm 790-609-02 10 pieces 16/26/46/36 0° 0° 0,7 mm 2,5 mm 790-608-02 10 pieces

84

Ceramic Brackets

Patented production process Tooth identical aesthetics without

unnatural reflections The special patented process technique gua-

rantees the aesthetic appearance of the natural teeth. No interfering light reflections when the bracket comes in contact with saliva.

US 4,968,459 EP 0337309 US 5,242,298

High material density High strength, without bother-

some metal slot Due to the dense polycrystalline structure

strength and function is achieved comparable to metal brackets. Aesthetically bothersome metal slots, in order to achieve lower friction values, are not necessary with Fascination® 2.

Ceramic Brackets – A fascinating fusion of aesthetics, function and handling

85

Ceramic Brackets

Extremely pure polycrystalline alumina oxide Optimal translucency, almost invisible Aesthetic and cosmetic perfection has been achieved through the use of extre-

mely pure alumina oxide. The natural color of the tooth penetrates through the bracket, therefore making it almost invisible.

Extraordinary sintering process Extraordinary sintering process The special production process produces an extremely high surface finish.

Therefore, the often observed discoloration through food products, such as tea, curry, ketchup, etc., has been eliminated.

Microfine material structure Excellent strength The outstanding microfine material structure of Fascination® 2 ceramic brackets

allow for strength equal to metal brackets.

Sintered process produced Rounded contours Fascination® 2 ceramic brackets are produced in a two step sintered process.

This means they do not require additional mechanical processing for grinding the slot.

Resulting in perfectly rounded contours that guarantee high patient comfort.

Innovative „button structured base“ Optimal bonding strength, easy debonding The unique button structure on the base enables constant surface strength of

the adhesive. This guarantees optimal adhesion and easier debonding at the end of treatment.

FDI System18 17 16 15 14 13 12 11 21 22 23 24 25 26 27 28 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8

8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 848 47 46 45 44 43 42 41 31 32 33 34 35 36 37 38

R L

– the colorful Funstyle Brackets

brackets world wide Enthusiastic Kids Kids and youngsters can especially be motiva-

ted into orthodontic treatment through bright colors. Now you can let youngsters choose their favorite color of brackets.

Well proven bracket Reassurance for both orthodontist

and patient The basis for the new JEWELS brackets are the

well established Fascination® ceramic brackets. This means, with JEWELS you benefit from all the construction and material advantages of the Fascination® brackets, including this system’s long standing experience.

The first colorful brackets world wide

86

Ceramic Brackets

87

Ceramic Brackets

Trendy colors Enthusiastic Kids In removable appliances, it is already a standard option to offer a variety of

colors to this target group (for example with Orthocryl® Neon colors and various integrated designs). With JEWELS it is not only possible to offer young patients colorful elastics but also the matching brackets in trendy colors.

Tested biocompatibility Reassurance for both orthodontist and patient All the colors available in the JEWELS brackets have been tested for biocompatibi-

lity. The result: JEWELS are harmless.

Excellent Price, Top Product Optimal value for the money Until now it has only been possible to offer parents metal brackets at a

reasonable price for the orthodontic treatment for their children. With JEWELS it is now also possible to conjure up an inexpensive and colorful smile into our children’s faces. This has been achieved through the use of first class raw materials and due to the patented production methods.

FDI System18 17 16 15 14 13 12 11 21 22 23 24 25 26 27 28 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8

8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 848 47 46 45 44 43 42 41 31 32 33 34 35 36 37 38

R L

Maxillary Mandibular Upper + Lower


88

Roth 18Slot: 0,46 x 0,76 mm / 18 x 30 · cuspid brackets with hooks · twin · with positioning guide

Ceramic Brackets

Fascination® / AssortmentsRoth 18 + 22 and Standard Edgewise 18 + 22

Teeth REF Quantity 13-11/21-23 700-055-00 1 bracket each = 6 pieces 15-11/21-25 700-057-00 1 bracket each = 10 pieces

Teeth REF Quantity 43-41/31-33 700-063-00 1 bracket each = 6 pieces

Teeth REF Quantity 13-11/21-23/43-41/31-33 700-056-00 1 bracket each = 12 pieces 15-11/21-25/45-41/31-35 700-058-00 1 bracket each = 20 pieces

Roth 22Slot: 0,56 x 0,76 mm / 22 x 30 · cuspid brackets with hooks · twin · with positioning guide Teeth REF Quantity 13-11/21-23 700-059-00 1 bracket each = 6 pieces 15-11/21-25 700-061-00 1 bracket each = 10 pieces



Standard Edgewise 18Slot: 0,46 x 0,76 mm / 18 x 30 · twin · without positioning guide Teeth REF Quantity 13-11/21-23 700-007-00 1 bracket each = 6 pieces 15-11/21-25 700-009-00 1 bracket each = 10 pieces


Standard Edgewise 22Slot: 0,56 x 0,76 mm / 22 x 30 · twin · without positioning guide Teeth REF Quantity 13-11/21-23 700-011-00 1 bracket each = 6 pieces 15-11/21-25 700-013-00 1 bracket each = 10 pieces




89

Roth 18Slot: 0,46 x 0,76 mm / 18 x 30 · twin · with positioning guide

Ceramic Brackets

Fascination® / Single PacksRoth 18 + 22 and Standard Edgewise 18 + 22

Teeth Torque Angulation In/Out Hook Width REF Quantity 11 + 11° + 5° 3,9 mm 700-015-03 1 piece 21 + 11° + 5° 3,9 mm 700-016-03 1 piece 12 + 7° + 8° 3,4 mm 700-017-03 1 piece 22 + 7° + 8° 3,4 mm 700-018-03 1 piece 13 - 2° + 13° 3,9 mm 700-019-03 1 piece 23 - 2° + 13° 3,9 mm 700-020-03 1 piece 13 700-021-03 1 piece 23 700-022-03 1 piece 14 - 7° 0° 3,9 mm 700-023-13 1 piece 24 - 7° 0° 3,9 mm 700-023-23 1 piece 15 - 7° 0° 3,9 mm 700-023-33 1 piece 25 - 7° 0° 3,9 mm 700-023-43 1 piece

Teeth Torque Angulation In/Out Hook Width REF Quantity 41 0° 0° 3,4 mm 700-002-13 1 piece 31 0° 0° 3,4 mm 700-002-23 1 piece 42 0° 0° 3,4 mm 700-002-33 1 piece 32 0° 0° 3,4 mm 700-002-43 1 piece 43 - 11° + 5° 3,9 mm 700-025-03 1 piece 33 - 11° + 5° 3,9 mm 700-026-03 1 piece 43 700-027-03 1 piece 33 700-028-03 1 piece 44 - 17° 0° 3,9 mm 700-029-13 1 piece 34 - 17° 0° 3,9 mm 700-029-23 1 piece 45 - 22° 0° 3,9 mm 700-030-13 1 piece 35 - 22° 0° 3,9 mm 700-030-23 1 piece

Roth 22Slot: 0,56 x 0,76 mm / 22 x 30 · twin · with positioning guide Teeth Torque Angulation In/Out Hook Width REF Quantity 11 + 11° + 5° 3,9 mm 700-035-03 1 piece 21 + 11° + 5° 3,9 mm 700-036-03 1 piece 12 + 7° + 8° 3,4 mm 700-037-03 1 piece 22 + 7° + 8° 3,4 mm 700-038-03 1 piece 13 - 2° + 13° 3,9 mm 700-039-03 1 piece 23 - 2° + 13° 3,9 mm 700-040-03 1 piece 13 700-041-03 1 piece 23 700-042-03 1 piece 14 - 7° 0° 3,9 mm 700-043-13 1 piece 24 - 7° 0° 3,9 mm 700-043-23 1 piece 15 - 7° 0° 3,9 mm 700-043-33 1 piece 25 - 7° 0° 3,9 mm 700-043-43 1 piece

Teeth Torque Angulation In/Out Hook Width REF Quantity 41 0° 0° 3,4 mm 700-005-13 1 piece 31 0° 0° 3,4 mm 700-005-23 1 piece 42 0° 0° 3,4 mm 700-005-33 1 piece 32 0° 0° 3,4 mm 700-005-43 1 piece 43 - 11° + 5° 3,9 mm 700-045-03 1 piece 33 - 11° + 5° 3,9 mm 700-046-03 1 piece 43 700-047-03 1 piece 33 700-048-03 1 piece 44 - 17° 0° 3,9 mm 700-049-13 1 piece 34 - 17° 0° 3,9 mm 700-049-23 1 piece 45 - 22° 0° 3,9 mm 700-050-13 1 piece 35 - 22° 0° 3,9 mm 700-050-23 1 piece

Single packages also available with contents = 10 pieces. In this case the 8th digit of the REF is ”0“.



90

Standard Edgewise 18Slot: 0,46 x 0,76 mm / 18 x 30 · twin · without positioning guide

Ceramic Brackets

Fascination® / Single PacksRoth 18 + 22 and Standard Edgewise 18 + 22

Teeth Torque Angulation In/Out Hook Width REF Quantity 11/21 0° 0° 1,2 mm 3,9 mm 700-001-03 1 piece

Teeth Torque Angulation In/Out Hook Width REF Quantity 12/22/42-41/31-32 0° 0° 1,2 mm 3,4 mm 700-002-03 1 piece 15-13/23-25/45-43/33-35 0° 0° 1,2 mm 3,9 mm 700-003-03 1 piece

Standard Edgewise 22Slot: 0,56 x 0,76 mm / 22 x 30 · twin · without positioning guide Teeth Torque Angulation In/Out Hook Width REF Quantity 11/21 0° 0° 1,2 mm 3,9 mm 700-004-03 1 piece

Teeth Torque Angulation In/Out Hook Width REF Quantity 12/22/42-41/31-32 0° 0° 1,2 mm 3,4 mm 700-005-03 1 piece 15-13/23-25/45-43/33-35 0° 0° 1,2 mm 3,9 mm 700-006-03 1 piece




91

Roth 18Slot: 0,46 x 0,76 mm / 18 x 30 · cuspid brackets with hooks · twin · with positioning guide

Ceramic Brackets

Fascination® 2 / AssortmentsRoth 18 + 22

Teeth REF Quantity 13-11/21-23 700-055-01 1 bracket each = 6 pieces 15-11/21-25 700-057-01 1 bracket each = 10 pieces



Roth 22Slot: 0,56 x 0,76 mm / 22 x 30 · cuspid brackets with hooks · twin · with positioning guide Teeth REF Quantity 13-11/21-23 700-059-01 1 bracket each = 6 pieces 15-11/21-25 700-061-01 1 bracket each = 10 pieces





92

Roth 18Slot: 0,46 x 0,76 mm / 18 x 30 · twin · with positioning guide

Ceramic Brackets

Fascination® 2 / Single PacksRoth 18 + 22

Teeth Torque Angulation In/Out Hook Width REF Quantity 11 + 11° + 5° 3,9 mm 700-015-04 1 piece 21 + 11° + 5° 3,9 mm 700-016-04 1 piece 12 + 7° + 8° 3,4 mm 700-017-04 1 piece 22 + 7° + 8° 3,4 mm 700-018-04 1 piece 13 700-021-04 1 piece 23 700-022-04 1 piece 14 - 7° 0° 3,9 mm 700-023-14 1 piece 24 - 7° 0° 3,9 mm 700-023-24 1 piece 15 - 7° 0° 3,9 mm 700-023-34 1 piece 25 - 7° 0° 3,9 mm 700-023-44 1 piece

Teeth Torque Angulation In/Out Hook Width REF Quantity 41 0° 0° 3,4 mm 700-002-14 1 piece 31 0° 0° 3,4 mm 700-002-24 1 piece 42 0° 0° 3,4 mm 700-002-34 1 piece 32 0° 0° 3,4 mm 700-002-44 1 piece 43 700-027-04 1 piece 33 700-028-04 1 piece 44 - 17° 0° 3,9 mm 700-029-14 1 piece 34 - 17° 0° 3,9 mm 700-029-24 1 piece 45 - 22° 0° 3,9 mm 700-030-14 1 piece 35 - 22° 0° 3,9 mm 700-030-24 1 piece

Roth 22Slot: 0,56 x 0,76 mm / 22 x 30 · twin · with positioning guide Teeth Torque Angulation In/Out Hook Width REF Quantity 11 + 11° + 5° 3,9 mm 700-035-04 1 piece 21 + 11° + 5° 3,9 mm 700-036-04 1 piece 12 + 7° + 8° 3,4 mm 700-037-04 1 piece 22 + 7° + 8° 3,4 mm 700-038-04 1 piece 13 700-041-04 1 piece 23 700-042-04 1 piece 14 - 7° 0° 3,9 mm 700-043-14 1 piece 24 - 7° 0° 3,9 mm 700-043-24 1 piece 15 - 7° 0° 3,9 mm 700-043-34 1 piece 25 - 7° 0° 3,9 mm 700-043-44 1 piece

Teeth Torque Angulation In/Out Hook Width REF Quantity 41 0° 0° 3,4 mm 700-005-14 1 piece 31 0° 0° 3,4 mm 700-005-24 1 piece 42 0° 0° 3,4 mm 700-005-34 1 piece 32 0° 0° 3,4 mm 700-005-44 1 piece 43 700-047-04 1 piece 33 700-048-04 1 piece 44 - 17° 0° 3,9 mm 700-049-14 1 piece 34 - 17° 0° 3,9 mm 700-049-24 1 piece 45 - 22° 0° 3,9 mm 700-050-14 1 piece 35 - 22° 0° 3,9 mm 700-050-24 1 piece




93

Ceramic Brackets

Jewels / AssortmentsRoth 18 + 22

Roth 18Slot: 0,46 x 0,76 mm / 18 x 30 · twin · with positioning guide · aquamarine Teeth REF Quantity 13-11/21-23 700-155-00 1 bracket each = 6 pieces 15-11/21-25 700-157-00 1 bracket each = 10 pieces

Slot: 0,46 x 0,76 mm / 18 x 30 · twin · with positioning guide · azure Teeth REF Quantity 13-11/21-23 700-255-00 1 bracket each = 6 pieces 15-11/21-25 700-257-00 1 bracket each = 10 pieces

Slot: 0,46 x 0,76 mm / 18 x 30 · twin · with positioning guide · pink Teeth REF Quantity 13-11/21-23 700-355-00 1 bracket each = 6 pieces 15-11/21-25 700-357-00 1 bracket each = 10 pieces

Slot: 0,46 x 0,76 mm / 18 x 30 · twin · with positioning guide · grenadine Teeth REF Quantity 13-11/21-23 700-455-00 1 bracket each = 6 pieces 15-11/21-25 700-457-00 1 bracket each = 10 pieces

Roth 22Slot: 0,56 x 0,76 mm / 22 x 30 · twin · with positioning guide · aquamarine Teeth REF Quantity 13-11/21-23 700-159-00 1 bracket each = 6 pieces 15-11/21-25 700-161-00 1 bracket each = 10 pieces

Slot: 0,56 x 0,76 mm / 22 x 30 · twin · with positioning guide · azure Teeth REF Quantity 13-11/21-23 700-259-00 1 bracket each = 6 pieces 15-11/21-25 700-261-00 1 bracket each = 10 pieces

Slot: 0,56 x 0,76 mm / 22 x 30 · twin · with positioning guide · pink Teeth REF Quantity 13-11/21-23 700-359-00 1 bracket each = 6 pieces 15-11/21-25 700-361-00 1 bracket each = 10 pieces

Slot: 0,56 x 0,76 mm / 22 x 30 · twin · with positioning guide · grenadine Teeth REF Quantity 13-11/21-23 700-459-00 1 bracket each = 6 pieces 15-11/21-25 700-461-00 1 bracket each = 10 pieces



94

Ceramic Brackets

Jewels / Single PacksRoth 18

Roth 18Slot: 0,46 x 0,76 mm / 18 x 30 · twin · with positioning guide · aquamarine Teeth Torque Angulation In/Out Hook Width REF Quantity 11 + 11° + 5° 3,9 mm 700-115-00 1 piece 21 + 11° + 5° 3,9 mm 700-116-00 1 piece 12 + 7° + 8° 3,4 mm 700-117-00 1 piece 22 + 7° + 8° 3,4 mm 700-118-00 1 piece 13 700-121-00 1 piece 23 700-122-00 1 piece 14 - 7° 0° 3,9 mm 700-123-10 1 piece 24 - 7° 0° 3,9 mm 700-123-20 1 piece 15 - 7° 0° 3,9 mm 700-123-30 1 piece 25 - 7° 0° 3,9 mm 700-123-40 1 piece

Roth 18Slot: 0,46 x 0,76 mm / 18 x 30 · twin · with positioning guide · azure Teeth Torque Angulation In/Out Hook Width REF Quantity 11 + 11° + 5° 3,9 mm 700-215-00 1 piece 21 + 11° + 5° 3,9 mm 700-216-00 1 piece 12 + 7° + 8° 3,4 mm 700-217-00 1 piece 22 + 7° + 8° 3,4 mm 700-218-00 1 piece 13 700-221-00 1 piece 23 700-222-00 1 piece 14 - 7° 0° 3,9 mm 700-223-10 1 piece 24 - 7° 0° 3,9 mm 700-223-20 1 piece 15 - 7° 0° 3,9 mm 700-223-30 1 piece 25 - 7° 0° 3,9 mm 700-223-40 1 piece

Roth 18Slot: 0,46 x 0,76 mm / 18 x 30 · twin · with positioning guide · pink Teeth Torque Angulation In/Out Hook Width REF Quantity 11 + 11° + 5° 3,9 mm 700-315-00 1 piece 21 + 11° + 5° 3,9 mm 700-316-00 1 piece 12 + 7° + 8° 3,4 mm 700-317-00 1 piece 22 + 7° + 8° 3,4 mm 700-318-00 1 piece 13 700-321-00 1 piece 23 700-322-00 1 piece 14 - 7° 0° 3,9 mm 700-323-10 1 piece 24 - 7° 0° 3,9 mm 700-323-20 1 piece 15 - 7° 0° 3,9 mm 700-323-30 1 piece 25 - 7° 0° 3,9 mm 700-323-40 1 piece

Roth 18Slot: 0,46 x 0,76 mm / 18 x 30 · twin · with positioning guide · grenadine Teeth Torque Angulation In/Out Hook Width REF Quantity 11 + 11° + 5° 3,9 mm 700-415-00 1 piece 21 + 11° + 5° 3,9 mm 700-416-00 1 piece 12 + 7° + 8° 3,4 mm 700-417-00 1 piece 22 + 7° + 8° 3,4 mm 700-418-00 1 piece 13 700-421-00 1 piece 23 700-422-00 1 piece 14 - 7° 0° 3,9 mm 700-423-10 1 piece 24 - 7° 0° 3,9 mm 700-423-20 1 piece 15 - 7° 0° 3,9 mm 700-423-30 1 piece 25 - 7° 0° 3,9 mm 700-423-40 1 piece



95

Ceramic Brackets

Jewels / Single PacksRoth 22

Roth 22Slot: 0,56 x 0,76 mm / 22 x 30 · twin · with positioning guide · aquamarine Teeth Torque Angulation In/Out Hook Width REF Quantity 11 + 11° + 5° 3,9 mm 700-135-00 1 piece 21 + 11° + 5° 3,9 mm 700-136-00 1 piece 12 + 7° + 8° 3,4 mm 700-137-00 1 piece 22 + 7° + 8° 3,4 mm 700-138-00 1 piece 13 700-141-00 1 piece 23 700-142-00 1 piece 14 - 7° 0° 3,9 mm 700-143-10 1 piece 24 - 7° 0° 3,9 mm 700-143-20 1 piece 15 - 7° 0° 3,9 mm 700-143-30 1 piece 25 - 7° 0° 3,9 mm 700-143-40 1 piece

Roth 22Slot: 0,56 x 0,76 mm / 22 x 30 · twin · with positioning guide · azure Teeth Torque Angulation In/Out Hook Width REF Quantity 11 + 11° + 5° 3,9 mm 700-235-00 1 piece 21 + 11° + 5° 3,9 mm 700-236-00 1 piece 12 + 7° + 8° 3,4 mm 700-237-00 1 piece 22 + 7° + 8° 3,4 mm 700-238-00 1 piece 13 700-241-00 1 piece 23 700-242-00 1 piece 14 - 7° 0° 3,9 mm 700-243-10 1 piece 24 - 7° 0° 3,9 mm 700-243-20 1 piece 15 - 7° 0° 3,9 mm 700-243-30 1 piece 25 - 7° 0° 3,9 mm 700-243-40 1 piece

Roth 22Slot: 0,56 x 0,76 mm / 22 x 30 · twin · with positioning guide · pink Teeth Torque Angulation In/Out Hook Width REF Quantity 11 + 11° + 5° 3,9 mm 700-335-00 1 piece 21 + 11° + 5° 3,9 mm 700-336-00 1 piece 12 + 7° + 8° 3,4 mm 700-337-00 1 piece 22 + 7° + 8° 3,4 mm 700-338-00 1 piece 13 700-341-00 1 piece 23 700-342-00 1 piece 14 - 7° 0° 3,9 mm 700-343-10 1 piece 24 - 7° 0° 3,9 mm 700-343-20 1 piece 15 - 7° 0° 3,9 mm 700-343-30 1 piece 25 - 7° 0° 3,9 mm 700-343-40 1 piece

Roth 22Slot: 0,56 x 0,76 mm / 22 x 30 · twin · with positioning guide · grenadine Teeth Torque Angulation In/Out Hook Width REF Quantity 11 + 11° + 5° 3,9 mm 700-435-00 1 piece 21 + 11° + 5° 3,9 mm 700-436-00 1 piece 12 + 7° + 8° 3,4 mm 700-437-00 1 piece 22 + 7° + 8° 3,4 mm 700-438-00 1 piece 13 700-441-00 1 piece 23 700-442-00 1 piece 14 - 7° 0° 3,9 mm 700-443-10 1 piece 24 - 7° 0° 3,9 mm 700-443-20 1 piece 15 - 7° 0° 3,9 mm 700-443-30 1 piece 25 - 7° 0° 3,9 mm 700-443-40 1 piece

96

Plastic Brackets

Tooth colored polycarbonate Impressive aesthetics The transparent, glassfibre-reinforced poly-

carbonate (composite) makes the brackets almost invisible, giving the patient an almost unimpaired aesthetical appearance.

Innovative base structure Excellent bonding characteristics The Elegance® (Super Lock) innovatively

designed base, together with an optimal che-mical bond, guarantees excellent mechanical retention (due to undercuts) between bracket and adhesive.

The invisible plastic bracket

97

Plastic Brackets

Glassfibre-reinforced plastic High fracture strength The specially developed glassfibre-reinforced polycarbonate (composite) gives the

Elegance® brackets their high fracture strength and excellent abrasion resistance.

Computer aided bracket design Minimal size with maximal strength Due to CAD / CAM support, a minimized bracket base was produced. The

smaller size gives higher fracture strength and allows debonding to occur in one piece.

Optimal sliding mechanics Special metal slot design The material combination allows for optimal sliding mechanics. The metal slot is

fully integrated in the composite and therefore unable to break out.

One-piece construction of slot and hooks Maximal fracture strength The hooks for the upper and lower cuspids are cast together with the metal slot in

a one-piece construction. This gives excellent stability and high fracture strength.

Clear color coding system Easy identification Each Elegance® bracket is individually marked by a color, thus virtually elimina-

ting identification mistakes. The markings are easy to remove before the arch wire is inserted.

FDI System18 17 16 15 14 13 12 11 21 22 23 24 25 26 27 28 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8

8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 848 47 46 45 44 43 42 41 31 32 33 34 35 36 37 38

R L



98

Roth 18Slot: 0,46 x 0,76 mm / 18 x 30 · cuspid brackets with hooks

Plastic Brackets

Elegance® / AssortmentsRoth 18 + 22 and Standard Edgewise 18 + 22



Teeth REF Quantity 15-11/21-25/45-41/31-35 791-059-00 1 bracket each = 20 pieces

Roth 22Slot: 0,56 x 0,76 mm / 22 x 30 · cuspid brackets with hooks Teeth REF Quantity 13-11/21-23 791-060-00 1 bracket each = 6 pieces



Standard Edgewise 18Slot: 0,46 x 0,76 mm / 18 x 30 Teeth REF Quantity 13-11/21-23 791-062-00 1 bracket each = 6 pieces


Standard Edgewise 22Slot: 0,56 x 0,76 mm / 22 x 30 Teeth REF Quantity 15-11/21-25/45-41/31-35 791-065-00 1 bracket each = 20 pieces



99

Roth 18Slot: 0,46 x 0,76 mm / 18 x 30

Plastic Brackets

Elegance® / Single PacksRoth 18 + 22 and Standard Edgewise 18 + 22

Teeth Torque Angulation In/Out Hook Width REF Quantity 11 + 14° + 5° 1,15 mm 3,6 mm 791-001-03 1 piece 21 + 14° + 5° 1,15 mm 3,6 mm 791-002-03 1 piece 12 + 7° + 8° 1,35 mm 3,2 mm 791-003-03 1 piece 22 + 7° + 8° 1,35 mm 3,2 mm 791-004-03 1 piece 13 791-005-03 1 piece 23 791-006-03 1 piece 15-14/24-25 - 7° 0° 0,75 mm 3,2 mm 791-007-03 1 piece

Teeth Torque Angulation In/Out Hook Width REF Quantity 42-41/31-32 - 1° 0° 1,20 mm 3,0 mm 791-008-03 1 piece 43 791-009-03 1 piece 33 791-010-03 1 piece 44/34 - 11° 0° 0,85 mm 3,2 mm 791-011-03 1 piece 45/35 - 17° 0° 0,95 mm 3,2 mm 791-012-03 1 piece

Roth 22Slot: 0,56 x 0,76 mm / 22 x 30 Teeth Torque Angulation In/Out Hook Width REF Quantity 11 + 14° + 5° 1,15 mm 3,6 mm 791-013-03 1 piece 21 + 14° + 5° 1,15 mm 3,6 mm 791-014-03 1 piece 12 + 7° + 8° 1,35 mm 3,2 mm 791-015-03 1 piece 22 + 7° + 8° 1,35 mm 3,2 mm 791-016-03 1 piece 13 791-017-03 1 piece 23 791-018-03 1 piece 15-14/24-25 - 7° 0° 0,85 mm 3,2 mm 791-019-03 1 piece

Teeth Torque Angulation In/Out Hook Width REF Quantity 42-41/31-32 - 1° 0° 1,20 mm 3,0 mm 791-020-03 1 piece 43 791-021-03 1 piece 33 791-022-03 1 piece 44/34 - 11° 0° 0,85 mm 3,2 mm 791-023-03 1 piece 45/35 - 17° 0° 0,95 mm 3,2 mm 791-024-03 1 piece

Standard Edgewise 18Slot: 0,46 x 0,76 mm / 18 x 30 Teeth Torque Angulation In/Out Hook Width REF Quantity 11/21 0° 0° 1,00 mm 3,6 mm 704-799-03 1 piece 12/22 0° 0° 1,00 mm 3,2 mm 703-799-03 1 piece

Teeth Torque Angulation In/Out Hook Width REF Quantity 42-41/31-32 0° 0° 1,00 mm 3,0 mm 702-799-03 1 piece

Teeth Torque Angulation In/Out Hook Width REF Quantity 15-13/23-25/45-43/33-35 0° 0° 0,95 mm 3,5 mm 713-799-03 1 piece




100

Standard Edgewise 22Slot: 0,56 x 0,76 mm / 22 x 30

Plastic Brackets

Elegance® / Single PacksRoth 18 + 22 and Standard Edgewise 18 + 22

Teeth Torque Angulation In/Out Hook Width REF Quantity 11/21 0° 0° 1,00 mm 3,6 mm 704-800-03 1 piece 12/22 0° 0° 1,00 mm 3,2 mm 703-800-03 1 piece

Teeth Torque Angulation In/Out Hook Width REF Quantity 42-41/31-32 0° 0° 1,00 mm 3,0 mm 702-800-03 1 piece

Teeth Torque Angulation In/Out Hook Width REF Quantity 15-13/23-25/45-43/33-35 0° 0° 0,95 mm 3,5 mm 713-800-03 1 piece


101

Notes

102

Titanium Buttons with Chain by WattedFor adhesive technique. With laser-shaped base and titanium chain.For seating displaced front and side teeth.

750-003-51 1 piece

Bracket Accessories

Lingual ButtonsFor the direct bonding technique. With mesh base for bonding, flat base. For anteriors.3.5 x 3.3 mm (H x W)

750-002-50 10 pieces

Lingual ButtonsFor the direct bonding technique. With mesh base for bonding, contoured base. For posteriors.ø 3.1 mm

750-002-60 10 pieces

Lingual CleatsFor the direct bonding technique. With mesh base for bonding, flat. For additional elastics or traction springs.3.5 x 3.3 mm (H x W)

750-602-50 10 pieces

Mesh BasesFor the direct bonding technique. Anatomically contoured. Flat, for centrals.3.8 x 3.8 mm (H x W)

799-202-00 10 pieces

Curved, for cuspids and first bicuspids.

4.0 x 4.5 mm (H x W) 799-204-00 10 pieces

For buccal tubes, large mesh base. For first molars.

3.8 x 8.3 mm (H x W)

799-205-00 10 pieces

For buccal tubes, small mesh base. For second molars.

3.0 x 6.5 mm (H x W)

799-206-00 10 pieces

GauzeFine mesh For making individual retentive bases. Periodontal splint etc., 10 x 10 cm.

316-000-00 1 piece

103

Protection WaxFor relief from irritation caused by brackets and ligature wires.Patient packs: 50 boxes of 5 bars each.

Color: white

124-305-00 50 x 5 pieces

Bracket Accessories

Bonding Organization TrayWith self sticking foil to pre-sort brackets. 891-002-00 50 pieces

Bracket ContainerFor storage of previously sorted brackets. 891-001-00 1 piece

Storage Box for BracketsFor storage of individual brackets. 766-003-00 1 piece

Typodont / DentoformStudy and test device for fixed appliances. The unit mechanically corresponds to a simple articulator. Depending upon the task, the metal / plastic teeth are set in the wax sockets, banded or bonded with brackets and the arch wire fitted.Availability: Unit without teeth and accessories.

050-801-00 1 piece

Metal/Plastic TeethFor Typodont/Dentoform Unit REF 050-801-00. Tooth crowns made of plastic. Tooth roots made of metal.

050-803-01 28 pieces

104

Wax BasesUpper and lower ideal occlusion. For Typodont / Dentoform Units REF 050-801-00

050-802-00 1 pair

Bracket Accessories

Jaw Orthopedic Study ModelsUpper and lower jaws, made of plastic.

Angle Class I Normal occlusion

892-001-00 1 piece

Angle Class II / 1 Distal occlusion

892-002-01 1 piece

Angle Class II / 2 Distal occlusion with deep bite

892-002-02 1 piece

Angle Class III Mesial occlusion Progene Verzahnung

892-003-00 1 piece

Orthodontic Demonstration ModelsMaxillary and mandibular white plastic models are hinged, bonded with brackets, preformed bands and ligated arches.discovery® Metal brackets and bands, Roth 22.

892-000-07 1 piece

105

Orthodontic Demonstration ModelsMaxillary and mandibular white plastic models are hinged, bonded with brackets, preformed bands and ligated arches.Elegance® Plastic brackets, bands and “White“ Arches, Roth 22.

892-000-10 1 piece

Bracket Accessories

Fascination® 2 Ceramic brackets, bands and “White“ Arches, Roth 22.

892-000-11 1 piece

equilibrium® 2 Metal brackets and bands, McLaughlin-Bennett-Trevisi* 22 and SUS2 - Sabbagh Universal Spring.* The Dentaurum version of this prescription is not claimed to be a duplication of any other, nor does Dentaurum imply that it is endorsed in any way by Drs. McLaughlin, Bennett and Trevisi.

892-000-13 1 piece

equilibrium® mini / equilibrium® 2 Metal brackets, bands and Ortho-Cast™ mini buccal tubes, Roth 22.

892-000-14 1 piece

106

Notes

107

Notes

Documents

Top quality orthodontic products for every age and all … quality orthodontic products for every age and all techniques Customer number: Please insert your Dentaurum customer number