Upload
hahanh
View
224
Download
1
Embed Size (px)
Citation preview
page 2
Summary
q The Tooway KA-SAT user terminalq Accessories and Multifeedq Health and Safetyq Satellite pointing basicsq Getting Spot configurationq The pointing processq The Modem GUIq The beeperq The Modem Signalling
page 4
> RT4000N-010:- 3W amplifier- Electromagnetic switch of polarization
(guarantied for not less than 500 switches)- 300-800MHz Rx, 1800-2300MHz Tx (1
connector)(2 connectors at the beginning)- Beeper for antenna pointing- Maximum 50m IFL length with RG6 cable- Not paint, zinc, no feed/polarizer plastic
cup
> Weight is 3.7 kg for TRIA in its packaging
> MTBF : 11 years (5 year lifetime expected)
> Availability : January 2011
Tooway TRIA description
page 5
Tooway User terminal for Ka band> RM4100N-010:
- One IFL Cable- 300-800MHz Rx, 1800-
2300MHz Tx (1 connector)
- 1 x Ethernet interface (1Gbps)
- USB interface (for futureservice upgrade)
- GUI
- 110/220Vac → 30 Vdc power toTRIA
page 6
Tooway 0.75 antenna shipping box
> RA4075N-010:- 77 x 72cm antenna dish size (packaging size 100 x 80 x 17.5cm)- Weight : 12.8kg- Integrating carry handle solution
page 7
> European mid pole solution (pole not provided by the logistic centre in Europe,beige color – 40/75mm)
> For Elevation angels up to 45 °
Tooway 0.75m antenna description (E)
page 8
Az/El adjustment (E)
> El adjustment
> Az adjustmentWaiting picture with the correct antenna colour
page 9
Antenna pointing limits> Find out the window Elevation
53° optimum pointing SNR 9.9
54.5° modem sync SNR 2.5 dB
56.5° first hint of a carrier> 56.5° noise heard beat tone
52° modem sync. SNR 0.0 dB
<51° noise and heard beat tone
51° modem start syncfirst hint of a carrier detectable
page 10
Antenna pointing limits> The size of the window
1.8°-1.8°
-2°
2°
-2.5°
2.5°
-2.4° 2.4°
Modem sync
Carrier detect
Peekingoptimum
Antenna peaking behaviour corresponds to a1.5 m Ku band antenna
page 12
Alternative Tooway terminal versionsfor special applications
> Top pole mount antenna- Same size antenna mount for higher elevation above 45°- Delivered with SB1 universal mount, no flexibility on mount diameter- Antenna colour dark gray as SB1 antenna
> IDU with 2 IFL cables for services including broadcast functions(Capability to connect separate Ka band receiver)
- RM4200N-010:- 1000-1500MHz Rx (1 connector)- 1800-2300MHz Tx (1 connector)- 1 x Ethernet interface (1Gbps)- USB interface (for future service upgrade)- 110/220Vac → 30Vdc power supply (<50m IFL length with RG6)- Black housing with blue LEDs
> Professional terminal 1m/1.2 m antenna under development (Aug 2011)
page 13
Tooway ODU synthesis
Description EIRP @ 29.75GHz Rx G/T @ 19.95GHz0.75m / 3W ODU 48.4dBW 17.2dB/K1.0m / 3W ODU 51.2dBW 20.4dB/K1.2m / 3W ODU 52.8dBW 23.0dB/K
> The following table provides G/T and EIRP performances of the Tooway ODU
> Tooway service deployment is foreseen with the smallest one, nevertheless a 1and 1.2m antenna dish sizes could be used in the edge of KA-SAT coverage
> As 1 and 1.2m antenna dish size have an EIRP higher than 50dBW, thedistributor has to manage license issues
page 14
Tooway terminal setupBroadband service only
toowayTM antenna
User PC
VoIP phone
User TV screen
Cable for Analogue phone
Ethernet cable
SCART/DVI/HDMI…for TV
> Interactive services with 1-IFL modem
WiFi routeroptional
L/S band cable for tooway
IPTV STB
Rx/Tx
ToowayTM modem1-IFL
Phone
toowayTM TRIA1-IFL
page 15
Tooway terminal setupBroadband service only + DTH Ka & Ku band Rx only
toowayTM antenna
User PC
VoIP phone
User TV screen
Cable for Analogue phone
Ethernet cable
SCART/DVI/HDMI…for TV
ToowayTM modem2-IFL
Rx
WiFi routerL/S band cable for tooway
IPTV STB
L band cable for DTH
Phone
> Interactive services with 2-IFL modem
> Ka band Rx only with additional splitter (9°E)
> Ku band Rx only with additional Ku band LNB(0.8°W, 5°E, 13°E or 19°E)
Tx
toowayTM TRIA2-IFL
Ku DTH LNB
Satellite 2 way splitterReference : S106Public cost : 6€ TTC
page 16
Summary
q The Tooway KA-SAT user terminalq Accessories and Multifeedq Health and Safetyq Satellite pointing basicsq Getting Spot configurationq The pointing processq The Modem GUIq The beeperq The Modem Signalling
page 17
Necessary accessories
> Antenna fixation- Fixation on a wall- Estimated price 15 – 20 €
- Fixation on the ground (Flat roof)- Estimated price 20 – 35 €
- Fixation on an angled roof- Estimated price 50 to 95 €
page 18
Necessary accessories
•Ifl Cables “coaxial cable” connection between Modemand ODU (TRIA)
•Normally (98% of all cases) one cable for TX and RX•300 – 800 MHz Fwd Link IF in frequency range ofcable networks and mobile services•Cable length about 50 m with good RG 6 cable•Centre wire must be full copper min 1mm Diameter•Minimum double shielding•Estimated price 25€/100 m
page 20
Multifeed TV reception
Surfbeam 2 antenna pointed to 9 ° EastMultifeed reception on that antenna from following orbital pos.
5° W (AB 3 Fransat) possible with margin of about 4 dB
0.8° W in principle possible; further test on site4.8° E in principle possible; further test on site
7° E not possible too close to Terminal feed require special development
9° E not possible as same orbital position of Ka Sat13° E possible with sufficient margins
16° E not possible due to strong interference and insufficient power satellites19.2° E possible with sufficient margins
28.5° E possible for all official Freesat channels with margins ofabout 4 dB
page 22
Summary
q The Tooway KA-SAT user terminalq Accessories and Multifeed
q Health and Safetyq Satellite pointing basicsq Getting Spot configurationq The pointing processq The Modem GUIq The beeperq The Modem Signalling
page 23Paris, 5/8/2011
Page23
Network & Product Description
Licensing for Tooway
CEPT RECOMMENDATION:
• Transmits in the Exclusive Satellite Band (29.5 – 30.00GHz)
• Has a Transmit Power of no more than 2 Watt
• Generates an EIRP of no more than 50 dBW
NO INDIVIDUAL LICENSING IS REQUIRED
This blanket license applies to most European countries but all installersmust comply with local regulations
• Is located more than 500 m away from any airport
When a Terminal:
•Receives in the exclusive Satellite Band 19.7-20.2 GHz
page 24
Health & security
Weight of antenna plus transceiver is 14Kgs
Lifting the antenna over shoulder – new drawing
Balance
Fix transceiver after securing antenna on mast
page 25
Health & securityAssessing building earth
Before linking the Tooway coaxial cable into the buildingearthing system you should assess the building earth. If theproperty does not conform to local regulations then thecustomer must be informed
If the property does conform
then you should earth the
system to prevent static build up and or touch currents
•Identify a suitable earthing location (e.g. socket, lightingcircuit, electrical circuit)
•Install a coaxial cable earthing block and earth as shown
page 26
Summary
q The Tooway KA-SAT user terminalq Accessories and Multifeedq Health and Safetyq Satellite pointing basicsq Getting Spot configurationq The pointing processq The Modem GUIq The beeperq The Modem Signalling
page 27
Installation position/ Line of Sight
There are 4 criteria for choosing a site for antenna
installation
1. Clear Line Of Sight (L.O.S)
2. Suitable surface for fixing antenna mount
3. Cable route and distance – Max 50m
4. Safety
page 28
Tooway manualLine of SightThere must be a 10 degree separation between the line ofsight angle and any obstacles
Normally a wall installation at high level gives the clearest L.O.S.
page 29
Summary
q The Tooway KA-SAT user terminalq Accessories and Multifeedq Health and Safetyq Satellite pointing basicsq Getting Spot configurationq The pointing processq The Modem GUIq The beeperq The Modem Signalling
page 31
Mapping and configuration
> Color in the pdf Color in Viasat GUI Number in Viasat GUI> RED BLUE 1> GREEN ORANGE 2> BLUE PURPLE 3> YELLOW GREEN 4
> Beam number Beam color Symbol rate Center frequencyPolarization
> 1 Blue 50 19.73125 RHCP> 2 Orange 50 19.99375 RHCP> 3 Purple 50 20.11875 LHCP> 4 Green 50 19.85625 LHCP
page 35
Summary
q The Tooway KA-SAT user terminalq Accessories and Multifeedq Health and Safetyq Satellite pointing basicsq Getting Spot configurationq The pointing processq The Modem GUIq The beeperq The Modem Signalling
page 36
Tooway Terminal pointing procedurePresumption Modem installed andIFL connected to TRAI> Zusammenbau der Antenne> Richtigen SAT-Spot finden> Modem und Laptop verbinden, enter 192.168.100.1> Goto Modem GUI Install menu; enter:
192.168.100.1/?page=install> Korrekte Spotdaten eingeben => TRIA beeper starts> Antenne einstellen => Modem lock tone> Azimuth fixieren> Elevation fixieren => continuous tone> Antenna final fixation> Pointing check (Daumen Check)
page 37
Summary
q The Tooway KA-SAT user terminalq Accessories and Multifeedq Health and Safetyq Satellite pointing basicsq Getting Spot configurationq The pointing processq The Modem GUIq The beeperq The Modem Signalling
page 48
Summary
q The Tooway KA-SAT user terminalq Accessories and Multifeedq Health and Safetyq Satellite pointing basicsq Getting Spot configurationq The pointing processq The Modem GUI
q The beeperq The Modem Signalling
page 49
Az/El adjustment (E)
> El adjustment
> Az adjustmentWaiting picture with the correct antenna colour
page 50
Pointing Beeper process PhaseIn Az, Modem detect the first maximum
Az or El angle of antenna
SatelliteFwc carrierSNR
SNR about 0 dB
AGC tone (bip bup), Modem Carrierdetection and synch.
Heard Beat
First maximum
Constant Beep Beep tone
Lower Beep Beep tone
page 51
Pointing Beeper process PhaseIn Az, Modem detect the first maximum
Az or El angle of antenna
SatelliteFwc carrierSNR
SNR about 0 dB
AGC tone (bip bup), Modem Carrierdetection and synch.
Heard Beat
Second maximum0.15 dB below maximumContinuous tone
Lower Beep Beep tone
Maximumpeekingpoint
page 52
Summary
q The Tooway KA-SAT user terminalq Accessories and Multifeedq Health and Safetyq Satellite pointing basicsq Getting Spot configurationq The pointing processq The Modem GUIq The beeper
q The Modem Signalling