Tools

Unlock the power of the tools in the Carlisle Tool-

Crib to help you design, install and

tension your belt drives.

Carlisle Tool-Crib

   

            

Sheave Gauges - plastic sheave templates $3.75 each part numbers: 102495 — RMA & Metric combined gauge

                     

                       

SheaveMaster - laser alignment tool. The SheaveMaster is a laser tool for fast and accurate alignment of belt drive pulleys. (part number: 108076-A) $750.00 each

                     

                       

Tension Finder - introducing a new tensioning tool from Carlisle Power Transmission - a simple, easy and accurate alternative for tensioning of individual belts or v-bands.(part number: 108039-A) $24.00 each

                     

                       Wallboard Display - a popular inventory and display system for v-belts. Includes 10 boards and 80 wallboard hooks.(part number: 93899)  currently not available

Carlisle Tool-Crib

   

Tensiometer - single, double and triple stem belt tension tester.part numbers: single 102761— double 105575 — triple 105576 —  

Drive Engineer - drive design software. Contact us on-line (sales@c-rproducts.com) to receive a free copy of Drive Engineer (€25 value) or call customer service on +44 1327 701030. 

                      

                      

Frequency-Finder - allows you to take simple, fast, repeatable and reliable tension measurements and can be used on virtually any type of belt.part number: 109061 —

                      

                      

Belt-Finder - belt measuring device. Find the exact Carlisle replacement belt instantly. part number: 93859 —

Sheave Gauges• RMA and Metric combined • Sheave condition and alignment are vital to V-belt life and performance

• New V-belts should never be installed without a thorough inspection of the sheaves

• Use the sheave gauge to accurately check grooves for wear

• Wear should not exceed 1/32” for individual V-belts or 1/64”for banded V-belts

SheaveMaster Laser Alignment

• Laser tool for fast & accurate alignment

• Magnetically mounted tool & 3 targets

• Quickly correct angular, offset and twist misalignment

• Only one person is needed

• Water, dust and shock proof

• Permanently calibrated

• Can be used indoors or out

Tension-Finder

• No Measurements

• No Math

• No O-rings

• No Computers

• It’s Practical

• It’s Reusable

• It’s Easy

• It Works!

Wallboard Display/Belt Racks• Popular inventory and display system for V-belts

• Includes 10 boards and 80 wallboard hooks

•Plastic board is 36 inches long, hooks extend 5 3/8”

Spring Loaded Tension Gauges• Tensioning method based on the fact that the force required to deflect a given span length by a given amount is related to the tension in the belt

• Proper tensioning of V-belts is the single most important factor necessary for long, satisfactory operation • Too little tension will result in slippage, causing rapid belt and sheave wear

• Too much tension can result in excessive stress on belts, bearings, and shafts

Drive Engineer• Windows®-based program• User friendly• New drive selection• Existing drive analysis• New generation of analysis software that helps end users increase their drive efficiency, drive life and overall knowledge of belt drives• Download from our website www.cptbelts.com or call customer service 866-773-2926

Frequency-Finder• Measures the natural frequency of vibration in the belt span

• Simple, fast, repeatable and reliable

• Can be used on virtually any type of belt

• Most precise method

Belt-Finder Measuring Tool• Find the exact Carlisle replacement belt instantly

• A quick check shows the top width and length / part no.

• Check Classical A & B belts, Durapower or XDV, plus 3VX and 5VX Power-Wedge

www.CarlisleBelts.com

www.c-rproducts.comsales@c-rproducts.comTel: +44 1327 701030Fax: +44 1327 701031

from