Embed Size (px)
Citation preview
Use of MTTRF equipment at ETH, Zurich 2011-06-10
Dr. W. Knapp. Head Metrolog, IWF, ETH Zurich page 2 of 7
Tools course in CAM, ‘From CAD to the part’ M. Schmid, PD Dr.habil. A. Kunz Lecture hours: 0 / Lab hours: 6 Abstract Introduction of integrated CAD applications CAM (Computer Aided Manufacturing), Motion Simulation (Kinematics) Objective Participants learn the possibilities of integrated CAD applications. Principal working procedure and basic functions of such applications shall be understood. Content CAM: - Introduction of CAM - Examples for 3-axeis milling operations Motion Simulation (Kinematic): - Introduction to simulation of machine movements - practical exercises Pictures from the course
Use of MTTRF equipment at ETH, Zurich 2011-06-10
Dr. W. Knapp. Head Metrolog, IWF, ETH Zurich page 3 of 7
Use of MTTRF equipment at ETH, Zurich 2011-06-10
Dr. W. Knapp. Head Metrolog, IWF, ETH Zurich page 4 of 7
