Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
QuickFlex®
Designedfor
BMT Turrets
The new quick change system forhigh performance and precision.
Minimal investment, maximal expandability.
4 - 6PageST-10/15/20/25/30/35, DS-30 (VDI40)
7 - 10PageST-20/25/30/35, DS-30 (BMT65)
11 - 12PageReduction sleeves
13 - 15PageCollets
EC = External coolant supplyHP-IC = High pressure internal coolant supply through cutting toolIC 80 bar = Internal and external coolant supplyMax. coolant pressure = 80 barIC 30 bar = Internal and external coolant supplyMax. coolant pressure = 30 barOnly use filtered coolant fluid (max. particle size = 50 µm)Do not run without coolantDo not use for machining abrasive materials such as cast iron, etc.
3© WTO GmbH * Subject to change without notice * www.wto.de
Contents
Toolholder
Radial square toolholder, left hand, short,Form B2
48-B2-40x2525
Radial square toolholder, left hand inverted,short, Form B4
48-B4-40x252548-B4-40x1001"
Radial square toolholder, left hand, long,Form B6
48-B6-40x2525
Radial square toolholder, left hand inverted,long, Form B8
48-B8-40x252548-B8-40x1001"
Axial square toolholder, left hand, Form C248-C2-40x2525
Axial square toolholder, left hand inverted,Form C4
48-C4-40x252548-C4-40x1001"
Cut-off holder, adjustable height, left hand48-AL-40x32SH 32
Cut-off holder, adjustable height, left handinverted
48-ALU-40x32SH 32
Cut-off holder, adjustable height, HP-ICIC 80 bar48-102690RSH 32IC 80 bar48-102690LSH 32
Toolholder
Holder for indexable insert drills, internalcoolant supply, Form E1
48-E1-40x16Ø 1648-E1-40x20Ø 2048-E1-40x25Ø 2548-E1-40x32Ø 3248-E1-40x40Ø 4048-E1-40x100Ø 1"
Boring bar holder, internal coolant supply,Form E2
48-E2-40x8Ø 848-E2-40x10Ø 1048-E2-40x12Ø 1248-E2-40x16Ø 1648-E2-40x20Ø 2048-E2-40x25Ø 2548-E2-40x30Ø 3048-E2-40x32Ø 3248-E2-40x40Ø 40
ER collet chuck holder, internal coolantsupply, Form E4
48-E4-40x25ER 25107525000
48-E4-40x32ER 32107532000
48-E4-40x40ER 40107540000
Plug, steel, Form Z248-Z2-40-SSteel
© WTO GmbH * Subject to change without notice * www.wto.de4
Haas ST-10/15/20/25/30/35, DS-30 (VDI40)
Driven Toolholders - QuickFlex®
Straight drill/milling unitEC1:1420132079-40ER-32 QF
0067732000
IC 80 bar1:1420132080-40ER-32 QF0067732000
Right angle drill/milling unitEC1:1420532128-40ER-32 QF
0067732000
IC 80 bar1:1420532129-40ER-32 QF0067732000
Driven Toolholders - Enhanced Program
Straight offset drill/milling unitEC1:1410120237-40ER 32
00675000592
IC 80 bar1:1410120266-40ER 3200675000592
EC1:2410113056-40ER 2000675000591
IC 80 bar1:2410113057-40ER 2000675000591
EC2:1410120239-40ER 3200675000592
IC 80 bar2:1410120240-40ER 3200675000592
Right angle drill/milling unitEC1:2410516098-40ER 25
00675000801
IC 80 bar1:2410516099-40ER 2500675000801
EC2:1410520291-40ER 3200675000490
IC 80 bar2:1410520292-40ER 3200675000490
Right angle back set drill/milling unitEC1:1420532106-40ER-32 QF
0067732000
IC 80 bar1:1420532107-40ER-32 QF0067732000
EC2:1420540029-40ER-40 QF0067740000
IC 80 bar2:1420540030-40ER-40 QF0067540000
5© WTO GmbH * Subject to change without notice * www.wto.de
Haas ST-10/15/20/25/30/35, DS-30 (VDI40)
Driven Toolholders - Enhanced Program
Adjustable angle drill/milling unitEC1:1411016017-40ER 25
00675000934
IC 80 bar1:1411016033-40ER 2500675000934
EC1:2411010044-40ER 1600675000936
IC 80 bar1:2411010045-40ER 1600675000936
Offset slitting saw unitEC2.73:1411500022-40Type 14-2
00675000460
160016142 Ø 16
160022142 Ø 22
160027142 Ø 27
160015142 Ø 5/8"
160019142 Ø 3/4"
160023142 Ø 7/8"
160025142 Ø 1"
Broaching unit for ID and ODEC1:1414132001-40TN765050
© WTO GmbH * Subject to change without notice * www.wto.de6
Haas ST-10/15/20/25/30/35, DS-30 (VDI40)
Static Toolholders - Standard Program
OD cutting holder48-924282548-924661"
OD cutting holder, HP-ICIC 80 bar48-92428-HP25IC 80 bar48-92466-HP1"
OD cutting holder, both sides48-924382548-924721"
OD cutting holder, both sides, HP-ICIC 80 bar48-92438-HP25IC 80 bar48-92472-HP1"
Face cutting holder48-867192548-867201"
Face cutting holder, HP-ICIC 80 bar48-109249-HP25IC 80 bar48-109250-HP1"
Combination toolholder, LF=72IC 80 bar48-84375Ø 40IC 80 bar48-87077Ø 1 1/2"IC 80 bar48-107499Ø 50IC 80 bar48-107501Ø 2"
Boring bar holder, both sides48-101033Ø 32
Static Toolholders - Standard Program
Boring bar holder, double48-84524Ø 3248-86905Ø 1 1/4"
Cover plate48-87089
7© WTO GmbH * Subject to change without notice * www.wto.de
Haas ST-20/25/30/35, DS-30 (BMT65)
Static Toolholders - Enhanced Program
OD cutting holder, double, Y axis48-8610325(1")
OD cutting holder, both sides, double, Y axis48-8615025(1")
Cut-off holder, adjustable48-99060SH 32
Cut-off holder, adjustable, long48-100084SH 32
Cut-off holder, adjustable, HP-ICIC 80 bar48-102256RSH 32IC 80 bar48-102256LSH 32
Cut-off holder, adjustable, long, HP-ICIC 80 bar48-100082RSH 32IC 80 bar48-100082LSH 32
Combination toolholder, back setIC 80 bar48-102037Ø 40
241140020 ER32
241140026 ER40
Boring bar holder, double, both sides48-86160Ø 3248-86274Ø 1 1/4"
© WTO GmbH * Subject to change without notice * www.wto.de8
Haas ST-20/25/30/35, DS-30 (BMT65)
Driven Toolholders - QuickFlex®
Straight drill/milling unitEC1:1420132015-65ER-32 QF
0067732000
IC 80 bar1:1420132016-65ER-32 QF0067732000
Right angle drill/milling unit, LF=72EC1:1420532015-65ER-32 QF
0067732000
IC 80 bar1:1420532016-65ER-32 QF0067732000
Right angle drill/milling unit, both sides,LF=72
EC1:1420532017-65ER-32 QF0067732000
Driven Toolholders - Enhanced Program
Straight drill/milling unitEC1:1410126001-65ER 40
00675000079
Straight milling unit with combination millarbor DIN 6358
EC1:1410222002-65Ø 2200675000483
EC1:1410225002-65Ø 1"00675000483
Straight offset drill/milling unitEC1:1420132037-65ER-32 QF
0067732000
IC 80 bar1:1420132038-65ER-32 QF0067732000
EC1:2420125010-65ER-25 QF0067725001
IC 80 bar1:2420125011-65ER-25 QF0067725001
Face drill/milling unit for ER collets, LF=72EC1:1410526005-65ER 40
00675000781
IC 80 bar1:1410526006-65ER 4000675000781
9© WTO GmbH * Subject to change without notice * www.wto.de
Haas ST-20/25/30/35, DS-30 (BMT65)
Driven Toolholders - Enhanced Program
Right angle drill/milling unit, LF=72EC1:2420525010-65ER-25 QF
0067725001
IC 80 bar1:2420525011-65ER-25 QF0067725001
EC2:1420532027-65ER-32 QF0067732000
IC 80 bar2:1420532028-65ER-32 QF0067732000
Right anglemilling unit with combinationmillarbor DIN 6358, LF=72
EC1:1410622001-65Ø 2200675000483
EC1:1410625001-651"00675000483
Adjustable angle drill/milling unitEC1:1411010002-65ER 16
00675000902
IC 80 bar1:1411010003-65ER 1600675000902
EC1:2411007002-65ER 1100675000914
IC 80 bar1:2411007003-65ER 1100675000914
Driven Toolholders - Enhanced Program
Gear hobbing unitEC1:1411500003-65Type 16-1EC2:1411500002-65Type 16-1
00675000927
160016161 Ø 16
160022161 Ø 22
160027161 Ø 27
160015161 Ø 5/8"
160019161 Ø 3/4"
160025161 Ø 1"
96394
Straight drill/milling unit, both sidesEC1:1413002001-65ER 25
00675000907
Straight drill/milling unit, double, Y axisEC1:1413002004-65ER 25
00675000907
2-spindle - Right angle drill/milling unit, Yaxis
EC1:1413502006-65ER 2500675000915
IC 80 bar1:1413502007-65ER 2500675000915
2-spindle - Right angle drill/milling unit, bothsides, Y axis
EC1:1413502008-65ER 2500675000915
Broaching unit for ID and ODEC1:1414532001-65TN765050
© WTO GmbH * Subject to change without notice * www.wto.de10
Haas ST-20/25/30/35, DS-30 (BMT65)
Standard reduction sleeves - cylindrical
Reduction sleeve Ø 20ø 6240020006ø 8240020008ø 10240020010ø 12240020012ø 14240020014ø 16240020016
Reduction sleeve Ø 25ø 6240025006ø 8240025008ø 10240025010ø 12240025012ø 16240025016ø 20240025020
Reduction sleeve Ø 32ø 6240032006ø 8240032008ø 10240032010ø 12240032012ø 16240032016ø 20240032020ø 25240032025
Reduction sleeve Ø 40ø 6240040006ø 8240040008ø 10240040010ø 12240040012ø 14240040014ø 16240040016ø 20240040020ø 25240040025ø 32240040032
Reduction sleeve Ø 50ø 10240050010ø 12240050012ø 16240050016ø 20240050020ø 25240050025ø 32240050032ø 40240050040
Reduction sleeve Ø 1 1/4"ø 3/8"2400125038ø 1/2"2400125050ø 5/8"2400125063ø 3/4"2400125075ø 7/8"2400125088ø 1"2400125100
Standard reduction sleeves - cylindrical
Reduction sleeve Ø 1 1/2"ø 3/8"2400150038ø 1/2"2400150050ø 5/8"2400150063ø 3/4"2400150075ø 7/8"2400150088ø 1"2400150100ø 1 1/4"2400150125
Reduction sleeve Ø 2"ø 1/2"2400200050ø 5/8"2400200063ø 7/8"2400200088ø 1"2400200100ø 1 1/4"2400200125ø 1 1/2"2400200150ø 1 3/4"2400200175
11© WTO GmbH * Subject to change without notice * www.wto.de
Accessories - Reduction sleeves
Standard reduction sleeves - morse taper
Reduction sleeve Ø 32MT 1240532001MT 2240532002MT 3240532003
Reduction sleeve Ø 40MT 1240540001MT 2240540002MT 3240540003MT 4240540004
Reduction sleeve Ø 50MT 2240550002MT 3240550003MT 4240550004
© WTO GmbH * Subject to change without notice * www.wto.de12
Accessories - Reduction sleeves
Collets DIN 6499B (ER/ESX)
inchmmER 11ø 0.276-0.020ø 7-0.5190011000ø 0.039-0.020ø 1-0.5190011010ø 0.059-0.039ø 1.5-1190011015ø 0.079-0.059ø 2-1.5190011020ø 0.098-0.079ø 2.5-2190011025ø 0.118-0.098ø 3-2.5190011030ø 0.138-0.118ø 3.5-3190011035ø 0.158-0.138ø 4-3.5190011040ø 0.177-0.158ø 4.5-4190011045ø 0.197-0.177ø 5-4.5190011050ø 0.217-0.197ø 5.5-5190011055ø 0.236-0.217ø 6-5.5190011060ø 0.256-0.236ø 6.5-6190011065ø 0.276-0.256ø 7-6.5190011070
inchmmER 16ø 0.394-0.020ø 10-0.5190016000ø 0.039-0.020ø 1-0.5190016010ø 0.079-0.039ø 2-1190016020ø 0.118-0.079ø 3-2190016030ø 0.158-0.118ø 4-3190016040ø 0.197-0.158ø 5-4190016050ø 0.236-0.197ø 6-5190016060ø 0.276-0.236ø 7-6190016070ø 0.315-0.276ø 8-7190016080ø 0.354-0.315ø 9-8190016090ø 0.394-0.354ø 10-9190016100
inchmmER 20ø 0.512-0.039ø 13-1190020000ø 0.039-0.020ø 1-0.5190020010ø 0.079-0.039ø 2-1190020020ø 0.118-0.079ø 3-2190020030ø 0.157-0.118ø 4-3190020040ø 0.197-0.157ø 5-4190020050ø 0.236-0.197ø 6-5190020060ø 0.276-0.236ø 7-6190020070ø 0.315-0.276ø 8-7190020080ø 0.354-0.315ø 9-8190020090ø 0.394-0.354ø 10-9190020100ø 0.433-0.394ø 11-10190020110ø 0.472-0.433ø 12-11190020120ø 0.512-0.472ø 13-12190020130
Collets DIN 6499B (ER/ESX)
inchmmER 25ø 0.630-0.039ø 16-1190025000ø 0.079-0.039ø 2-1190025020ø 0.118-0.079ø 3-2190025030ø 0.157-0.118ø 4-3190025040ø 0.197-0.157ø 5-4190025050ø 0.236-0.197ø 6-5190025060ø 0.276-0.236ø 7-6190025070ø 0.315-0.276ø 8-7190025080ø 0.354-0.315ø 9-8190025090ø 0.394-0.354ø 10-9190025100ø 0.433-0.394ø 11-10190025110ø 0.472-0.433ø 12-11190025120ø 0.512-0.472ø 13-12190025130ø 0.551-0.512ø 14-13190025140ø 0.591-0.551ø 15-14190025150ø 0.630-0.591ø 16-15190025160
inchmmER 32ø 0.787-0.079ø 20-2190032000ø 0.118-0.079ø 3-2190032030ø 0.157-0.118ø 4-3190032040ø 0.197-0.157ø 5-4190032050ø 0.236-0.197ø 6-5190032060ø 0.276-0.236ø 7-6190032070ø 0.315-0.276ø 8-7190032080ø 0.354-0.315ø 9-8190032090ø 0.394-0.354ø 10-9190032100ø 0.433-0.394ø 11-10190032110ø 0.472-0.433ø 12-11190032120ø 0.512-0.472ø 13-12190032130ø 0.551-0.512ø 14-13190032140ø 0.591-0.551ø 15-14190032150ø 0.630-0.591ø 16-15190032160ø 0.669-0.630ø 17-16190032170ø 0.709-0.669ø 18-17190032180ø 0.748-0.709ø 19-18190032190ø 0.787-0.748ø 20-19190032200
13© WTO GmbH * Subject to change without notice * www.wto.de
Accessories - Collets
Collets DIN 6499B (ER/ESX)
inchmmER 40ø 1.024-0.118ø 26-3190040000ø 0.157-0.118ø 4-3190040040ø 0.197-0.157ø 5-4190040050ø 0.236-0.197ø 6-5190040060ø 0.276-0.236ø 7-6190040070ø 0.315-0.276ø 8-7190040080ø 0.354-0.315ø 9-8190040090ø 0.394-0.354ø 10-9190040100ø 0.433-0.394ø 11-10190040110ø 0.472-0.433ø 12-11190040120ø 0.512-0.472ø 13-12190040130ø 0.551-0.512ø 14-13190040140ø 0.591-0.551ø 15-14190040150ø 0.630-0.591ø 16-15190040160ø 0.669-0.630ø 17-16190040170ø 0.709-0.669ø 18-17190040180ø 0.748-0.709ø 19-18190040190ø 0.787-0.748ø 20-19190040200ø 0.827-0.787ø 21-20190040210ø 0.866-0.827ø 22-21190040220ø 0.906-0.866ø 23-22190040230ø 0.945-0.906ø 24-23190040240ø 0.984-0.945ø 25-24190040250ø 1.024-0.984ø 26-25190040260
Collets DIN 6499D (ER/ESX) - sealed, for IC
inchmmER 11ø 3191011030ø 4191011040ø 5191011050ø 6191011060
ø 0.125191111013-inø 0.188191111019-inø 0.25191111025-in
inchmmER 16ø 3-10191016000ø 3191016030ø 4191016040ø 5191016050ø 6191016060ø 7191016070ø 8191016080ø 9191016090ø 10191016100
ø 0.125-0.375191116001ø 0.125191116013-inø 0.188191116019-inø 0.25191116025-inø 0.313191116031-inø 0.375191116038-in
inchmmER 25ø 4-16191025000ø 3191025030ø 4191025040ø 5191025050ø 6191025060ø 7191025070ø 8191025080ø 9191025090ø 10191025100ø 11191025110ø 12191025120ø 13191025130ø 14191025140ø 15191025150ø 16191025160
ø 0.25-0.625191125001ø 0.25191125025-inø 0.313191125031-inø 0.375191125038-inø 0.438191125044-inø 0.5191125050-inø 0.563191125056-inø 0.625191125063-in
© WTO GmbH * Subject to change without notice * www.wto.de14
Accessories - Collets
Collets DIN 6499D (ER/ESX) - sealed, for IC
inchmmER 32ø 4-20191032000ø 3191032030ø 4191032040ø 5191032050ø 6191032060ø 7191032070ø 8191032080ø 9191032090ø 10191032100ø 11191032110ø 12191032120ø 13191032130ø 14191032140ø 15191032150ø 16191032160ø 17191032170ø 18191032180ø 19191032190ø 20191032200
ø 0.25-0.75191132001ø 0.25191132025-inø 0.313191132031-inø 0.375191132038-inø 0.438191132044-inø 0.5191132050-inø 0.563191132056-inø 0.625191132063-inø 0.688191132069-inø 0.75191132075-in
inchmmER 40ø 6191040060ø 8191040080ø 10191040100ø 12191040120ø 14191040140ø 16191040160ø 18191040180ø 20191040200ø 22191040220ø 25191040250
ø 0.25191140025-inø 0.313191140031-inø 0.375191140038-inø 0.438191140044-inø 0.5191140050-inø 0.563191140056-inø 0.625191140063-inø 0.688191140069-inø 0.75191140075-inø 0.875191140088-inø 1191140100-in
15© WTO GmbH * Subject to change without notice * www.wto.de
Accessories - Collets
09
I 2
01
9 e
n
| AustraliaDimac Tooling [email protected]
| BelarusLLC “PMI Engineering”[email protected]
| CanadaMittmann Industrial [email protected]
| ChinaShanghai [email protected]
| Czech RepublicALBA precision, spol. [email protected]
| FinlandSuomen Terätuonti [email protected]
| FrancePhilippe [email protected]
| Great BritainCutwel [email protected]
| IndiaUlhas [email protected]
| IsraelE.Y.A.R. [email protected]
| ItalyPrymark [email protected]
| JapanNK Works Co. [email protected]
| KoreaWTO Office [email protected]
| MexicoWorkholding Engineering De Mé[email protected]
| NetherlandsToologic BeNeLux [email protected]
| NorwayHelge Karlsen Verktøy og Maskin [email protected]
| PolandARCO Andrzej [email protected]
| RomaniaSC Elif Trading [email protected]
| RussiaWTO Office [email protected]
| SlovakiaALBA precision [email protected]
| SpainITALMATIC, [email protected]
| SwedenKomet Scandinavia [email protected] | SwitzerlandUtilis [email protected]
| TaiwanKaiko Co., [email protected]
| TurkeyMYK CNC MAKINA SAN. [email protected]
| Ukraine„LLC“ SPA [email protected]
| USAWTO Inc.www.wto-usa.com
| GermanyWTO GmbHwww.wto.de | China
WTO Asiawww.wto-asia.com
WTO GmbHAuf der oberen Au 4577797 OhlsbachGermany
WTO USA13900-FSouth Lakes DriveCharlotte, NC 28273USA
WTO AsiaRoom 109-110, Building 2No. 228 Banting RoadJiuting Town, Songjiang District201615 ShanghaiChina
WTO worldwide
Our distribution partners. Competence right there.