Upload
verity-cain
View
225
Download
2
Tags:
Embed Size (px)
Citation preview
Tony Myhra - (800)346-7237
www.cryotech.com
NAAC/CMA DVD Available
Deicing Chemicals Available
• Sodium chloride• Magnesium chloride• Calcium chloride• Potassium chloride• Combinations of all of the above• Some with inhibitors packages• Calcium magnesium acetate (CMA)• Potassium acetate (CF7)• Anhydrous sodium acetate (NAAC)
Sodium ChlorideNaCl
• Working temperature - + 20°F (-7°C) • Eutectic temperature - -6°F (-21°C)• Granular - Solid crystal in form• Can be liquefied to a 23% solution• Rate of application – 200-500#/LM• Can be mixed with abrasives• Most common deicer
Magnesium ChlorideMgCl2
• Working temperature - + 5°F (-15°C) • Eutectic temperature - -28°F (-33°C)• Granular – hydroscopic• Liquid to a 25% - 35% solution • Rate of liquid application – 15-35 GAL/LM• Deice – anti ice - prewet • Aggressive corrosion • Requires periodic agitation weekly or
daily
Calcium ChlorideCaCl2
• Working temperature - -25°F (-31°C) • Eutectic temperature - -51°F (-45°C)• Pellet, flake, granular - hydroscopic • Liquid to a 25% - 35% solution• Rate of liquid application– 15-25 GAL/LM• Deice – anti-ice – pre wet• Requires daily agitation• Aggressive Corrosion• Hard on leather shoes and gloves
Potassium ChlorideKCl
• Working temperature - +25°F (-4°C) • Eutectic temperature - +5°F (-15°C)• Solid crystal in form• Rate slightly higher than NaCl• Deicer– mostly commercial use
Calcium Magnesium Acetate (CMA)
• Working temperature - + 20°F (-7°C) • Eutectic temperature - -18°F (-28°C)• Pelleted - Liquid to a 25% - 30% sol • Rate of liquid application – anti-icing-15-
25 GAL/LM –Deice – 25-60 GAL/LM (.5-1 gallon/1000 Ft²)• Rate dry – 200-400# LANE MILE
(10-25#/1000 FT²)• Deice – Anti-ice – Pre wet sensitive areas• Agitation of liquid prior to loading • Contains no chlorides• Safest deicer for new concrete
CMA 40
• Working temperature - + 20°F (-7°C) • Eutectic temperature - -8°F (-22°C)• 40% CMA – 60% Sodium Chloride• Spread – Same as rock salt - 200# - 500#
LANE MILE • Used to prevent spalling • Used only where there is no steel in
reinforced concrete.• Lower cost deicer.
Anhydrous Sodium Acetate (NAAC)
• Working temperature - + 0°F (-18°C) • Eutectic temperature - -8°F (-22°C)• Pelleted only • Spread – 200# - 500# LANE MILE • 7-20# per 1000 Ft² • Deicer – contains no chloride • Used in salt sensitive areas – airport
runways, bridges, parking garages, doorways, sidewalks, etc.
Potassium Acetate Based (KAC) CF7
• Working temperature - -26°F (-32°C) • Eutectic temperature - -76°F (-60°C)• Liquid – 50% solution • Rate of liquid application – 15-3O GAL/LM• .5 to 1 gallon per 1000 Ft². • Deice – anti-ice – pre wet • No agitation – indefinite storage life• Contains no chloride• Ideal for Fixed Anti-icing Spray
Technology (FAST)
Hidden Costs of Deicing
• Cost of salt
– Purchase price– Storage– Labor– Equipment
• Corrosion to structures and vehicles
• Cost of sand
– Purchase price– Storage– Labor – Equipment
• Clean up• Lawsuits
Other Hidden Costs
• Cost to public if we don’t deice.
– Accidents– Delays– Lost business– Lost production
• Environmental concerns
– Water quality• Chlorides• Damage to
vegetation and soils
– Air quality• PM10• Sand siltration
Federal Highway Administration
Search for chloride salt alternatives
• Environment
• Performance
• Low Corrosion
CMA, NAAC & CF7
The Problem Solvers
Acetate Ion
• Chemical formula…CH3COO-
• Low corrosion
• Low toxicity
• Biodegradable
• Long lasting effect
Raw Material for Acetates
Acetic Acid
– Acetate ion
– Found in vinegar
– pH changed when reacted base materials
– Biodegradable
Calcium Magnesium Acetate
Dolomitic lime + acetic acid
yields
Ca3Mg7(C2H3O2)20
Calcium Magnesium Acetate
• Since 1979
• Environmentally safe
• Low corrosion
• Safe for concrete
• Effective performance
Residual effect Stores well Biodegradable Low toxicity Costs more to make!
Cryotech NAACSolid Runway Deicer
97% Anhydrous Sodium Acetate+ <1% corrosion inhibitors
CH3COO- + Na+
97% Anhydrous Sodium Acetate
• Since 1997
• Environmentally safe
• Low corrosion
• Effective performance
• Approved for airports
Residual effect Stores well Biodegradable Low toxicity Costs more to make!
CF7 Liquid DeicerPotassium Acetate-Based
Acetic Acid + Potassium Hydroxide
yields Potassium Acetate + Water
(plus proprietary corrosion Inhibitors)
HC2H3O2 + KOH => KC2H3O2 + H2O
Problem Solver
• Environment
• Anti-icing and Deicing
• New bridges, Chloride Contaminated bridges
• Sidewalks, Doorways & Parking Structures
• Blending/Inhibitor
• Fixed anti-icing spray technology
(F.A.S.T.)
Understanding Deicers
Must know how to use deicers
Effectively and how they work.
What Is Anti-Icing?
Anti-icing is a snow and ice control measure to prevent a strong bond between frozen precipitation or frost and a pavement surface by timely application of a chemical freezing point depressant. Proactive approach.
Anti-icing Expectations
• Snow more easily removed
• Ice may not form or remain slushy
• Lower chemical usage
• Shoveling, plowing, brooming required
• Lower equipment maintenance costs
What Is De-Icing?
De-icing is an measure where a deicer is applied to the top of an accumulation of snow, ice or frost that is already bonded or formed to the pavement surface. Reactive approach.
Equipment
Using the right equipment
For effective snow & ice control
New Bridges, Parking Garages, Elevated Walkways
CMA/NAAC/CF7 – “The problem solver”
FHWA - CMA Study Conclusions
• Concrete w/o rebar
– Little weight loss or spalling• Concrete with rebar
– No damage
– 4 Year study• Non-metallics
– Little affect
CMA – “The problem solver”
Costs of Using Chloride Based Deicers
• Cost of new construction - $20,000-$24,000/Space
• Cost to repair chloride damage $3000-$4000/space
• Cost of lost revenue while out of service?• Cost of inconvenience to customers.• Cost of demolition• Cost of liability and insurability• Can’t afford chloride deicers damage from
$50/space of salt over a 20 year period
CMA Effect on Chloride Contaminated Concrete
• The Danish corrosion centre, 1990
“CMA…seems to delay the onset of corrosion.”
• BP research centre, 1989
“Changing…to acetate deicer decreases the corrosion rate of steel…by more than a factor of ten.”
Corrosion Retardation
Effect of Deicers on ConcreteSpalling of Non Air-Entrained Structural Concrete
0.00 1.00 2.00 3.00 4.00 5.00 6.00
Water
CMA
Ethylene Glycol
Urea
Calcium Chloride
Sodium Chloride
Concrete Surface Weight Loss (mg/mm^2)
Dept of Transport, UK, 1993
Concrete Spalling
Acetate Deicers Summary of Options
• Direct application
• With chloride deicers
• With sand
• Liquid deicer
• Liquid anti-icer
• Liquid pre wetter
Cargill SafeLane™ Polymer Overlay – Product Profile
Existing substrate
SafeLane Surface
3/8” Thickness4 lbs./ft2
SafeLane can be installed on concrete, asphalt, FRP, steel or woodConcrete – 12.5 lbs/sf per inch; Asphalt – 14 lbs/sf per inch
37
Deicing Chemicals Review
• Sodium chloride• Magnesium chloride• Calcium chloride• Potassium chloride• Combinations of all of the above• Some with inhibitors packages• Calcium magnesium acetate (CMA)• Potassium acetate (CF7)• Anhydrous sodium acetate (NAAC)
Calcium Magnesium Acetate (CMA)
• Working temperature - + 20°F (-7°C) • Eutectic temperature - -18°F (-28°C)• Pelleted - Liquid to a 25% - 30% sol • Rate of liquid application – anti-icing-15-
25 GAL/LM – Deice – 25-60 GAL/LM• Rate dry – 200-400# Lane Mile
(10-25#/1000 Ft²)• Deice – Anti-ice – Pre wet sensitive areas• Agitation of liquid prior to loading liquid.• Contains no chlorides• Safest deicer for new concrete
CMA 40
• Working temperature - + 20°F (-7°C) • Eutectic temperature - -8°F (-22°C)• 40% CMA – 60% Sodium Chloride• Spread – 200#-500# LANE MILE (10-
25#/1000 Ft²)• Used to prevent spalling • Used only where there is no steel in
reinforced concrete.• Lower cost deicer.
Anhydrous Sodium Acetate (NAAC)
• Working temperature - + 0°F (-18°C) • Eutectic temperature - -8°F (-22°C)• Pelleted only • Spread – 200#-500#/Lane Mile
(7-20#/1000 Ft²)• Deicer – contains no chloride • Used in salt sensitive areas – airport
runways, bridges, parking garages, doorways, sidewalks, etc.
Potassium Acetate Based (KAC) CF7
• Working temperature - -26°F (-32°C) • Eutectic temperature - -76°F (-60°C)• Liquid – 50% solution • Rate of liquid application – 15-3O GAL/LM .5 – 1 gallon per 1000 Ft²• Deice – anti-ice – pre wet • No agitation – indefinite storage life• Contains no chloride• Ideal for Fixed Anti-icing Spray
Technology (FAST)
Potassium Acetate Based (KAC) CF7
• Working temperature - -26°F (-32°C) • Eutectic temperature - -76°F (-60°C)• Liquid – 50% solution • Rate of liquid application – 15-3O GAL/LM .5 – 1 gallon per 1000 Ft²• Deice – anti-ice – pre wet • No agitation – indefinite storage life• Contains no chloride• Ideal for Fixed Anti-icing Spray
Technology (FAST)
Acetate DeicersSummary of Options
• Direct application
• With chloride deicers
• With sand
• Liquid deicer
• Liquid anti-icer
• Liquid pre wetter
Options for Parking Garage Longevity
• Good Design• Good Construction Materials• Good Drainage• Good Sealers/Membranes -
Waterproofing• Continuous Maintenance Practices • Avoid Chloride Deicers• Use Non-Chloride Deicers like NAAC, CMA
& CF7
Questions?
Tony Myhra - (800)346-7237
www.cryotech.com
NAAC/CMA DVD Available