Upload
vannga
View
214
Download
0
Embed Size (px)
Citation preview
Tone™GSA Price List 7/28/15
General Services AdministrationFederal Acquisition ServiceFederal Supply Schedule CatalogFSC Group 71, Part IOffice FurnitureContract Number: GS-28F-8029HContract Period: July 26, 1999 throughDecember 31, 2017Contractor: Knoll, Inc.P.O. Box 1571235 Water StreetEast Greenville, PA 18041(215) 679-7991Business Size: Large
Information for OrderingTone™GS-28F-8029H
1. Special Item Numbers:a. 711-1 Furniture Systemsb. 711-96 Leased Furniture Systems
(see page 5)c. 711-93 Reconfiguration Services:
To be negotiated on a project-by-projectbasis. Requires purchase of product.
d. 711-94 Design/Layout Services:Rate is $65.49 per hour
e. 711-95 Installation Services:Rates $500.00 and Below:Union: $106.25 per hourNon Union: $51.50 per hour
Rates $500.01 and Greater:To be negotiated on a project by projectbasis.
f. 711-91 Project Management:Union: $128.97 per hourNon-Union: $63.48 per hour
2. Maximum Order:$500,000 net product value($2,564,102 list).
3. Minimum Order:$50.00 per delivery point (net).
4. Geographical Coverage(delivery area):The 48 contiguous United States and the Districtof Columbia.
Deliveries to destinations outside the 48contiguous states are made F.O.B. inland carrier,point of exportation, with transportation to bepaid by the government from point of exportationto the destination outside the 48 contiguousstates.
5. Points of Production:East Greenville, Pennsylvania
6. Discounts:List prices (non-discount deducted) are shown inthis Price List.
90 Day Delivery Program
DiscountSingle Order fromList Value List Price$ 0-$ 400,000 78.5%$400,001-$2,564,102 80.5%
7. N/A
8. Payment Terms:Net 30 days.
9. Government Credit Card:Accepted below and above the micro purchasethreshold
10. Foreign Items:None.
11a. Time of Delivery:90 days, ARO.
11b, c, & d. Expedited/Overnight Delivery:Contact your Knoll GSA Customer ServiceRepresentative
12. F.O.B. Point:Destination within 48 contiguous United Statesand the District of Columbia.
13a. Ordering Address:Knoll, Inc.c/o Knoll Participating DealerP.O. Box 1571235 Water StreetEast Greenville, PA 18041Attn: Order Entry
13b. Ordering Procedures:For supplies and services, ordering proceduresand information on BPA’s are found in FAR8.404.
14. Payment Address:Knoll, Inc.P.O. Box 841366Dallas, TX 75284-1366
15. Warranty:See page 4.
16. Export Packing Charges:Write for a quotation.
17. N/A
18. N/A
19. Installation:To be negotiated on a project-by-project basis.
20. N/A
21. N/A
22. Participating Dealers:Knoll dealers may not accept equipment ordersor perform invoicing under this contract.However, authorized Knoll Dealers do providedesign and installation services as Knoll’ssubcontractor.
Contact your local Knoll Sales Representativefor a current listing of authorized dealers in yourarea.
23. N/A
24. N/A
25 & 26. Federal Identification Numbers:CCR: 1996J212868Tax ID No. (TIN): 13-3873847Cage Code: 13207DUNS No.: 78-131-6096CEC: 0877161GNAICS No.: 337214
27. Restocking Terms:25% of net product cost. Prior authorization isrequired.
28. Cancellation Terms:Prior to production, no cancellation charge willapply.
Tone Height Adjustable Tables GSA
1
Sample Order Form
1 Order Date
2 Contract number
3 Order number
4 Issuing office:Requestor name andtelephone number
5 Shipping address:Contact name andtelephone number
6 Contractor:Knoll, Inc.c/o Knoll Participating DealerP.O. Box 1571235 Water StreetEast Greenville, PA 18041Attn.: Order Entry
7 Remit to:Knoll, Inc.P.O. Box 841366Dallas, TX 75284-1366
8 FOB destination
9 ARO date (After Receipt of Order)
10 Terms: Net 30 Days
11 Complete product description,including model number,and finish(es)
12 Quantity ordered
13 Individual unit price
14 Amount (quantity x unit price)
15 Partial shipment and partialpayment authorized
16 Total cost
17 Invoice address
18 Authorized contracting officersignature and telephone number
19 Authorized contracting officername and title (typed)
Tone Height Adjustable Tables GSA
2
SAMPLE ORDER FORM
ORDER FOR SUPPLIES OR SERVICES PAGE OF PAGES
IMPORTANT: Mark all packages and papers with contact and/or order numbers.
DATE OF ORDER CONTRACT NO. (if any) ORDER NO. REQUISITION/REFERENCE NO.
1 01-1-14 2 GS-28F-8029H 3 12345ISSUING OFFICE (Address correspondence to) SHIP TO: (Consignee and address, ZIP Code)
4 Federal Agency Name1 Town StreetCity, State, ZipName and Telephone Number
5 Federal Agency Name2 Town StreetCity, State, ZipName and Telephone Number
TO: CONTRACTOR (Names, address and ZIP Code) TYPE OF ORDER
6 Knoll, Inc.c/o Knoll Participating DealerP.O. Box 1571235 Water StreetEast Greenville, PA 18041Attn.: Order Entry
� A. PURCHASE - Reference your
Please furnish the following on the terms and conditions specified on both sidesof this order and on the attached sheets, if any, including delivery as indicated.This purchase is negotiated under authority of:
REMIT TO:
7 Knoll, Inc.P.O. Box 841366Dallas, TX 75284-1366
� B. DELIVERY - Except for billing instructions on the reverse, this delivery orderis subject to instructions contained on this side only of this form and is issuedsubject to the terms and conditions of the above-numbered contract.
REQUISITIONING OFFICE
ACCOUNTING AND APPROPRIATION DATA BUSINESS CLASSIFICATION (Check appropriate boxes)
� SMALLOTHER THANSMALL
DISAD-VANTAGED
WOMEN-OWNED� � �X
F.O.B. POINT GOVERNMENT NO. DELIVER TO F.O.B. POINTON OR BEFORE (Date)
DISCOUNT TERMS
8 Destination9 ARO Date 10 Net 30 Days
(See reverse for Rejections)
ITEM NO.(A)
SUPPLIES OR SERVICES(B)
QUANTITYORDERED
(C)UNIT(D)
UNIT PRICE(E)
AMOUNT(F)
QUANTITYACCEPTED
(G)
111 1 lot of Tone Height Ajustable Tables
per attached Bill of MaterialsDesign - 15 hours at $65.49 per hourInstallation
15 Partial shipment and partialpayment authorized
121
13$25,000.00
982.351,600.00
14$25,000.00
982.351,600.00
SEE BILLINGINSTRUCTIONSON REVERSE
SHIPPING POINT GROSS SHIPPING WEIGHT INVOICE NO. (H) TOT.⇐ (cont. pages)
MAIL INVOICE TO: (Include ZIP Code)
17 Agency Name, 3 Town Street, City, State, Zip16$27,582.35
⇐ (1) GRANDTOTAL
UNITED STATES OF AMERICA NAME (Typed)
BY (Signature) ⇐18 Contracting Officer signature and 19 John Smith, Contracting Officertelephone no.
Tone Height Adjustable Tables GSA
3
Warranty
Warranty Seller warrants to the original Purchaser only that the Products Seller manufactures and sells to Purchaser are free of defects in workmanship andmaterials, during the applicable warranty period set forth below.Warranty period set forth below is for 24-hour, 7 days a week, multi shift use (includes parts and labor to repair).Should any failure to conform with this limited warranty appear to a Product listed below during the applicable warranty period from the date of shipment,Seller shall, upon prompt written notice, repair or replace, at its option and costs, the affected part or parts.Product and Period of WarrantyLifetime: Antenna Workspaces, AutoStrada, Calibre, Crinion Open Table, Currents, Dividends Horizon, Equity, Morrison, Reff Profiles laminate, Series 2Storage, Template and other non-wood components (except cascade edge worksurfaces, operational parts, controls, electrical, Lighting, Series 2 VeneerFront Storage, special or custom products, see below)12 Years: Chadwick, Essentials Work Chairs, Generation by Knoll, Life, Moment, MultiGeneration by Knoll, ReGeneration by Knoll, RPM and Sapper seating(except seating upholstery, textiles, leathers and finishes, see below).10 Years: Antenna Workspaces, AutoStrada, Crinion Open Table, Dividends Horizon, Reff Profiles, Template wood components, Series 2 Veneer FrontStorage, cascade edge worksurfaces, Wood Casegoods (The Graham Collection) (except wood casegoods upholstered surfaces, see below), Interactiontables (except height adjustment mechanisms for Counterforce, crank-adjustable, and split-top tables and worksurfaces, see below), Reuter overheads,Reuter vertical storage, KnollExtra Sapper Monitor Arm Collection, Adjustable keyboard mechanisms and platforms, Communication Boards (exceptfabric board textiles, see below), Smokador collection (except leathers, see below), and Orchestra Universal Systems Accessories.5 Years: Operational parts, controls, electrical, Lighting (except light ballasts, bulbs and power supply, see below), special or custom product, wood veneerproducts, Currents handcrank, Interaction Counterforce, Interaction crank-adjustable, and split-top mechanisms, KnollStudio, Spark Series seatingstructural elements, Richard Schultz outdoor products, KnollExtra CPU storage and all universal storage drawers.3 Years: Seating upholstery, textiles, leathers and finishes. Fabric boards textiles and Smokador Collection leathers.2 Years: All other KnollExtra product1 Year: Light ballasts, bulbs and power supply, seating upholstered armpads and soft armpads, wood casegoods upholstered surfaces. KnollStudio MayaLin and Spark Series seating finishes.This warranty does not apply to:• Damage caused by a carrier other than the Seller.• Normal wear and tear or acts or omissions of parties other than Seller (including user modification, improper use or installation of Products).• COM or other third party materials applied to Products.• Products not installed by or under the auspices of a Knoll Dealer.• Dramatic temperature variations or exposure to unusual conditions.• Changes in surface finishes, including colorfastness due to aging or exposure to light.• Except as specifically noted above, textiles and upholstery supplied by KnollTextiles (consult current KnollTextiles price list for applicable warranty).Natural variations occurring in wood, marble, and leather shall not be considered defects, and the Seller does not guarantee the colorfastness or matchingof the colors, grains or textures, or surface hardness of such materials. The Seller also does not guarantee the colorfastness of fiberglass panel surfaces.THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANYWARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROMCOURSE OF DEALING OR USAGE OF TRADE.The remedies provided above are the Purchaser’s sole remedies for any failure of Seller to comply with its obligations regarding the workmanship of itsProducts. Correction of any nonconformity in the manner and for the period of time provided shall constitute complete fulfillment of all liabilities of Seller,with respect to or arising out of the Product furnished hereunder.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Claims All shipments for all Knoll Products within the contiguous United States and Canada are F.O.B. Destination. Risk of loss passes to Purchaser at time ofdelivery to carrier. Purchaser shall inspect all Products upon receipt and notify Seller within ten (10) working days after receipt of any damage or defectswhich are, or should be, apparent from an inspection of the Product and its packaging. Failure of Purchaser to make a claim against carrier or notify Sellerduring the ten (10) working day period shall constitute acceptance of the Products and waiver of any apparent defects, errors or shortages. Seller will agreeto repair or replace Product damaged in shipment if Purchaser has notified Seller of freight damage within ten (10) working days after receipt and assignsits rights against the carrier.
Tone Height Adjustable Tables GSA
4
Leasing Information
Knoll Lease withOption to Purchase
Plan (LWOP)
GSA Contract: GS-28F-8029H
Special Item Number: 711-96
Leasing Minimum Order: $50,000 net product value
Term: 36 Months Term: 60 Months
Residual Value: 9.35%APR =7.5%
Residual Value: 4.68%APR =9.5%
Lease Rate Factors: Months 1 - 12 = .0355013 - 24 = .0320025 - 36 = .02600
Lease Rate Factors: Months 1 - 12 = .0245013 - 24 = .0230025 - 36 = .0220037 - 48 = .0185049 - 60 = .01630
Knoll Lease ToOwn Plan (LTOP)
Term: 36 Months Term: 60 Months
APR = 8.5% APR = 9.75%
Lease Rate Factors: .03245 .01997
To determine the monthly payment, take the net product value andmultiply by the lease rate factor.
Tone Height Adjustable Tables GSA
5
Table of Contents
Introduction Knoll and Sustainable Design 7Bases Standard Electric 8
Extended Electric 10Pin-Set 12Fixed Height 14
Tops Antenna Workspaces Worksurfaces 16AutoStrada Worksurfaces 17Dividends Horizon Worksurfaces 18Morrison Worksurfaces 19Reff Profiles Worksurfaces 20
Alpha-Numeric Index 21
General Ordering Information 22
Tone Height Adjustable Tables GSA
PLTHAGSA02146
Copyright � 2015 Knoll, Inc.All rights reserved.All prices effective 2/15/2015.
Knoll and Sustainable Design
Each year Knoll sets key initiatives in our journey to sustainability. We are members of a global consortium on energy, have adopted ascientific, metrics-based approach to sustainable product design, and maintain a leadership position in establishing universal,verifiable, sustainability standards for our industry.
Knoll promotes independent third-party certification because it provides the most impartial and trustworthy foundation for industry-wideenvironmental compliance. Certification by established and respected third parties ensures that all manufacturers are held to the samehigh standards and that customers can trust a company’s declaration about the environmental benefits of its products. Knoll third-partypartners include: the International Standards Organization (ISO); Forest Stewardship Council (FSC�); Rainforest Alliance;GREENGUARD� Environmental Institute; and The Business and Institutional Furniture Manufacturer’s Association (BIFMA) level�certification from Scientific Certification Systems (SCS).
In addition, Knoll is aligned with the U.S. Green Building Council and can help companies, healthcare organizations and educationalinstitutions achieve Leadership in Energy and Environmental Design (LEED�) workplace certification.
Global Climate Change• Knoll is a sponsor of the Clinton Global Initiative, which brings together a community of global leaders to devise and implement
solutions to some of the world’s most pressing challenges, including environmental change.
• Knoll has a comprehensive Energy Management Program to increase energy efficiency in products and processes.
Life Cycle Assessment (LCA) Tool• Life Cycle Assessment is a science-based measurement of a product’s environmental impacts throughout its life cycle, from raw
materials sourcing through manufacture, shipping, use and re-use or end-of-life. LCA enables cradle-to-cradle implementation ofsustainable practices.
• Knoll has partnered with The Green Standard.org to develop an affordable, universal ISO-compliant computer-based LCA tool thatcan be used by the entire contract furniture industry and is partnering on the development of an Environmental Product DeclarationSystem (EPDs) for Knoll products. EPDs are verified documents containing LCA results and additional environmental performanceinformation about a product.
Setting Industry Standards• Knoll partners with MTS (The Institute for Market Transformation to Sustainability) to develop the SMaRT© Consensus Sustainable
Products Standards, a set of consensus-based sustainable product standards based on the LEED� model, for all building products,fabric, apparel, flooring and carpet. MTS, the developer of SMaRT©, is an accredited American National Standards Institute (ANSI)standard developer.
• Knoll also partners with BIFMA (Business and Institutional Furniture Manufacturers Association) to promote level� sustainabilitystandards for the contract furniture industry.
• Knoll has established FSC� (Forest Stewardship Council) certified wood as the standard for general office open plan office systems,casegoods and tables.
• Knoll has launched Full Circle, a resource recovery program developed with ANEW, to help customers extend the life cycle of surplusfurniture, fixtures and equipment (FF&E) in an economically, socially and environmentally responsible manner.
• Our goal is to encourage all manufacturers in the contract furniture industry and related industries to adopt standards that will lead tosustainable products and practices.
For more information about Knoll and sustainable design, visit knoll.com/environment.
7
Standard ElectricFixed Width Base
description type w* w d pattern no. list price
24� Deep C-Leg Bases For use with 42�W, 24�D C-Leg Top 42� 35� 22� TBCEF3522( )( )( ) $2,614.For use with 48�W, 24�D C-Leg Top 48� 41� 22� TBCEF4122( )( )( ) 2,614.For use with 54�W, 24�D C-Leg Top 54� 47� 22� TBCEF4722( )( )( ) 2,614.For use with 60�W, 24�D C-Leg Top 60� 53� 22� TBCEF5322( )( )( ) 2,614.For use with 66�W, 24�D C-Leg Top 66� 59� 22� TBCEF5922( )( )( ) 2,636.For use with 72�W, 24�D C-Leg Top 72� 65� 22� TBCEF6522( )( )( ) 2,636.For use with 78�W, 24�D C-Leg Top 78� 71� 22� TBCEF7122( )( )( ) 2,636.
30� Deep C-Leg Bases For use with 42�W, 30�D C-Leg Top 42� 35� 28� TBCEF3528( )( )( ) 2,659.For use with 48�W, 30�D C-Leg Top 48� 41� 28� TBCEF4128( )( )( ) 2,659.For use with 54�W, 30�D C-Leg Top 54� 47� 28� TBCEF4728( )( )( ) 2,659.For use with 60�W, 30�D C-Leg Top 60� 53� 28� TBCEF5328( )( )( ) 2,659.For use with 66�W, 30�D C-Leg Top 66� 59� 28� TBCEF5928( )( )( ) 2,682.For use with 72�W, 30�D C-Leg Top 72� 65� 28� TBCEF6528( )( )( ) 2,682.For use with 78�W, 30�D C-Leg Top 78� 71� 28� TBCEF7128( )( )( ) 2,682.
30� Deep T-Leg Bases For use with 48�W, 30� or 36�D T-Leg Top 48� 41� 28� TBTEF4128( )( )( ) 2,659.For use with 54�W, 30� or 36�D T-Leg Top 54� 47� 28� TBTEF4728( )( )( ) 2,659.For use with 60�W, 30� or 36�D T-Leg Top 60� 53� 28� TBTEF5328( )( )( ) 2,659.For use with 66�W, 30� or 36�D T-Leg Top 66� 59� 28� TBTEF5928( )( )( ) 2,682.For use with 72�W, 30� or 36�D T-Leg Top 72� 65� 28� TBTEF6528( )( )( ) 2,682.For use with 78�W, 30� or 36�D T-Leg Top 78� 71� 28� TBTEF7128( )( )( ) 2,682.
C-Leg Corner Base For use with 48�W Corner C-Leg Top 48� 44� 16� TBKEF444416( )( )( ) 3,705.
* Nominal Width
Order Code
C-Leg and T-Leg Bases
Example: TBCEF5328GD613
TB Tone BaseC C-LegE ElectricF Fixed Width53 Width28 DepthG GlidesD Digital Display613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$68 list for casters.
2. Control Switch:‘‘S’’ specifies the standardup/down control switch. ‘‘D’’ willspecify the digital display withprogrammable setting. Add $309list for the digital display withprogrammable settings.
3. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
Base comes with worksurfacemounting hardware.
Privacy Screens can only bespecified with glides.
22�D C-Leg bases supportrectangular tops up to 24�D. 28�DC-Leg bases support rectangulartops up to 30�D. 28�D T-Leg basessupport rectangular tops up to 36�Dcentered over feet. 16�D Cornerbases support 48� x 48� corner topsup to 30�D.
Electric Bases have a height rangeof 25.6�-42.1 (base only) with a loadcapacity of 265 lbs.
Tone Height Adjustable Tables GSA
8
Standard ElectricAdjustable Width Base
description type w d pattern no. list
24� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 291/2� - 451/4� 22� TBCEAS22( )( )( ) $2,727.Medium - For use with 42� - 78� wide tops 411/2� - 691/4� 22� TBCEAM22( )( )( ) 2,750.Large - For use with 66� - 96� wide tops 611/2� - 891/4� 22� TBCEAL22( )( )( ) 2,773.
30� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 291/2� - 451/4� 28� TBCEAS28( )( )( ) 2,795.Medium - For use with 42� - 78� wide tops 411/2� - 691/4� 28� TBCEAM28( )( )( ) 2,818.Large - For use with 66� - 96� wide tops 611/2� - 891/4� 28� TBCEAL28( )( )( ) 2,841.
30� Deep T-Leg Bases Small - For use with 30� - 54� wide tops 291/2� - 451/4� 28� TBTEAS28( )( )( ) 2,795.Medium - For use with 42� - 78� wide tops 411/2� - 691/4� 28� TBTEAM28( )( )( ) 2,818.Large - For use with 66� - 96� wide tops 611/2� - 891/4� 28� TBTEAL28( )( )( ) 2,841.
C-Leg Corner Base For use with 48�, 54�, 60�W corner tops and48� x 66�, 72�, 84�W extended corner tops
441/2� - 721/4� 16� TBKEAM16( )( )( ) 3,773.
Order Code
C-Leg and T-Leg Bases
Example: TBCEAS28GD613
TB Tone BaseC C-LegE ElectricA Adjustable WidthS Small28 DepthG GlidesD Digital Display613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$68 list for casters.
2. Control Switch:‘‘S’’ specifies the standardup/down control switch. ‘‘D’’ willspecify the digital display withprogrammable setting. Add $309list for the digital display withprogrammable settings.
3. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
Base comes with worksurfacemounting hardware.
Privacy Screens can only bespecified with glides.
22�D C-Leg bases supportrectangular tops up to 24�D. 28�DC-Leg bases support rectangulartops up to 30�D. 28�D T-Leg basessupport rectangular tops up to 36�Dcentered over feet. 16�D Cornerbases support 48�, 54�, 60�W cornertops up to 30�D as well as 48� x 66�,72�, 84�W extended corner tops upto 30�D.
Adjustable Width Crossbars comein three sizes: Small, Medium,Large.Small fits tops 30� - 54� wideMedium fits tops 42� - 78� wideLarge fits tops 66� - 96� wide
Note that 30�, 36�, 45�, 69�, 84�,90�, 96� undersized tops are not partof our standard scope for Tone.
Actual Dimensions for Adjustablecrossbar are:Small 291/2� - 451/4�Medium 411/2� - 691/4�Large 611/2� - 891/4�
Electric Bases have a height rangeof 25.6�-42.1 (base only) with a loadcapacity of 265 lbs.
Tone Height Adjustable Tables GSA
9
Extended ElectricFixed Width Base
description type w* w d pattern no. list
24� Deep C-Leg Bases For use with 42�W, 24�D C-Leg Top 42� 35� 22� TBCEXF3522( )( )( ) $3,205.For use with 48�W, 24�D C-Leg Top 48� 41� 22� TBCEXF4122( )( )( ) 3,205.For use with 54�W, 24�D C-Leg Top 54� 47� 22� TBCEXF4722( )( )( ) 3,205.For use with 60�W, 24�D C-Leg Top 60� 53� 22� TBCEXF5322( )( )( ) 3,205.For use with 66�W, 24�D C-Leg Top 66� 59� 22� TBCEXF5922( )( )( ) 3,227.For use with 72�W, 24�D C-Leg Top 72� 65� 22� TBCEXF6522( )( )( ) 3,227.For use with 78�W, 24�D C-Leg Top 78� 71� 22� TBCEXF7122( )( )( ) 3,227.
30� Deep C-Leg Bases For use with 42�W, 30�D C-Leg Top 42� 35� 28� TBCEXF3528( )( )( ) 3,250.For use with 48�W, 30�D C-Leg Top 48� 41� 28� TBCEXF4128( )( )( ) 3,250.For use with 54�W, 30�D C-Leg Top 54� 47� 28� TBCEXF4728( )( )( ) 3,250.For use with 60�W, 30�D C-Leg Top 60� 53� 28� TBCEXF5328( )( )( ) 3,250.For use with 66�W, 30�D C-Leg Top 66� 59� 28� TBCEXF5928( )( )( ) 3,273.For use with 72�W, 30�D C-Leg Top 72� 65� 28� TBCEXF6528( )( )( ) 3,273.For use with 78�W, 30�D C-Leg Top 78� 71� 28� TBCEXF7128( )( )( ) 3,273.
30� Deep T-Leg Bases For use with 48�W, 30� or 36�D T-Leg Top 48� 41� 28� TBTEXF4128( )( )( ) 3,250.For use with 54�W, 30� or 36�D T-Leg Top 54� 47� 28� TBTEXF4728( )( )( ) 3,250.For use with 60�W, 30� or 36�D T-Leg Top 60� 53� 28� TBTEXF5328( )( )( ) 3,250.For use with 66�W, 30� or 36�D T-Leg Top 66� 59� 28� TBTEXF5928( )( )( ) 3,273.For use with 72�W, 30� or 36�D T-Leg Top 72� 65� 28� TBTEXF6528( )( )( ) 3,273.For use with 78�W, 30� or 36�D T-Leg Top 78� 71� 28� TBTEXF7128( )( )( ) 3,273.
C-Leg Corner Base For use with 48�W Corner C-Leg Top 48� 44� 16� TBKEXF444416( )( )( ) 4,545.
* Nominal Width
Order Code
C-Leg and T-Leg Bases
Example: TBCEXF4722CS613
TB Tone BaseC C-LegEX Extended ElectricF Fixed Width47 Width22 DepthC CastersS Standard Display613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$68 list for casters.
2. Control Switch:‘‘S’’ specifies the standardup/down control switch. ‘‘D’’ willspecify the digital display withprogrammable setting. Add $309list for the digital display withprogrammable settings.
3. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
Base comes with worksurfacemounting hardware.
Privacy Screens can only bespecified with glides.
22�D C-Leg bases supportrectangular tops up to 24�D. 28�DC-Leg bases support rectangulartops up to 30�D. 28�D T-Leg basessupport rectangular tops up to 36�Dcentered over feet. 16�D Cornerbases support 48� x 48� corner topsup to 30�D.
Extended Electric Bases have aheight range of 21.6�- 47.8� (baseonly) with a load capacity of 265lbs.
Tone Height Adjustable Tables GSA
10
Extended ElectricAdjustable Width Base
description type w d pattern no. list
24� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 291/2� - 451/4� 22� TBCEXAS22( )( )( ) $3,318.Medium - For use with 42� - 78� wide tops 411/2� - 691/4� 22� TBCEXAM22( )( )( ) 3,341.Large - For use with 66� - 96� wide tops 611/2� - 891/4� 22� TBCEXAL22( )( )( ) 3,364.
30� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 291/2� - 451/4� 28� TBCEXAS28( )( )( ) 3,386.Medium - For use with 42� - 78� wide tops 411/2� - 691/4� 28� TBCEXAM28( )( )( ) 3,409.Large - For use with 66� - 96� wide tops 611/2� - 891/4� 28� TBCEXAL28( )( )( ) 3,432.
30� Deep T-Leg Bases Small - For use with 30� - 54� wide tops 291/2� - 451/4� 28� TBTEXAS28( )( )( ) 3,386.Medium - For use with 42� - 78� wide tops 411/2� - 691/4� 28� TBTEXAM28( )( )( ) 3,409.Large - For use with 66� - 96� wide tops 611/2� - 891/4� 28� TBTEXAL28( )( )( ) 3,432.
C-Leg Corner Base For use with 48�, 54�, 60�W Corner Tops and48� x 66�, 72�, 84�W Extended Corner Tops
441/2� - 721/4� 16� TBKEXAM16( )( )( ) 4,659.
Order Code
C-Leg and T-Leg Bases
Example: TBTEXAS28GD613
TB Tone BaseT T-LegEX Extended ElectricA Adjustable WidthS Small28 DepthG GlidesD Digital Display613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$68 list for casters.
2. Control Switch:‘‘S’’ specifies the standardup/down control switch. ‘‘D’’ willspecify the digital display withprogrammable setting. Add $309list for the digital display withprogrammable settings.
3. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
Base comes with worksurfacemounting hardware.
Privacy Screens can only bespecified with glides.
22�D C-Leg bases supportrectangular tops up to 24�D. 28�DC-Leg bases support rectangulartops up to 30�D. 28�D T-Leg basessupport rectangular tops up to 36�Dcentered over feet. 16�D Cornerbases support 48�, 54�, 60�W cornertops up to 30�D as well as 48� x 66�,72�, 84�W extended corner tops upto 30�D.
Adjustable Width Crossbars comein three sizes: Small, Medium,Large.Small fits tops 30� - 54� wideMedium fits tops 42� - 78� wideLarge fits tops 66� - 96� wide
Note that 30�, 36�, 45�, 69�, 84�,90�, 96� undersized tops are not partof our standard scope for Tone.
Actual Dimensions for AdjustableWidth Base are:Small 291/2� - 451/4�Medium 411/2� - 691/4�Large 611/2� - 891/4�
Extended Electric Bases have aheight range of 21.6�-47.8� (baseonly) with a load capacity of 265lbs.
Tone Height Adjustable Tables GSA
11
Pin-SetFixed Width Base
description type w* w d pattern no. list price
24� Deep C-Leg Bases For use with 42�W, 24�D C-Leg Top 42� 35� 22� TBCPF3522( ) $1,432.For use with 48�W, 24�D C-Leg Top 48� 41� 22� TBCPF4122( ) 1,432.For use with 54�W, 24�D C-Leg Top 54� 47� 22� TBCPF4722( ) 1,432.For use with 60�W, 24�D C-Leg Top 60� 53� 22� TBCPF5322( ) 1,432.For use with 66�W, 24�D C-Leg Top 66� 59� 22� TBCPF5922( ) 1,455.For use with 72�W, 24�D C-Leg Top 72� 65� 22� TBCPF6522( ) 1,455.For use with 78�W, 24�D C-Leg Top 78� 71� 22� TBCPF7122( ) 1,455.
30� Deep C-Leg Bases For use with 42�W, 30�D C-Leg Top 42� 35� 28� TBCPF3528( ) 1,477.For use with 48�W, 30�D C-Leg Top 48� 41� 28� TBCPF4128( ) 1,477.For use with 54�W, 30�D C-Leg Top 54� 47� 28� TBCPF4728( ) 1,477.For use with 60�W, 30�D C-Leg Top 60� 53� 28� TBCPF5328( ) 1,477.For use with 66�W, 30�D C-Leg Top 66� 59� 28� TBCPF5928( ) 1,500.For use with 72�W, 30�D C-Leg Top 72� 65� 28� TBCPF6528( ) 1,500.For use with 78�W, 30�D C-Leg Top 78� 71� 28� TBCPF7128( ) 1,500.
30� Deep T-Leg Bases For use with 48�W, 30� or 36�D T-Leg Top 48� 41� 28� TBTPF4128( ) 1,477.For use with 54�W, 30� or 36�D T-Leg Top 54� 47� 28� TBTPF4728( ) 1,477.For use with 60�W, 30� or 36�D T-Leg Top 60� 53� 28� TBTPF5328( ) 1,477.For use with 66�W, 30� or 36�D T-Leg Top 66� 59� 28� TBTPF5928( ) 1,500.For use with 72�W, 30� or 36�D T-Leg Top 72� 65� 28� TBTPF6528( ) 1,500.
C-Leg Corner Base For use with 48�W Corner C-Leg Top 48� 44� 16� TBKPF444416( ) 2,136.
Order Code
C-Leg and T-Leg Bases
Example: TBCPF4722G,613
TB Tone BaseC C-LegP Pin-SetF Fixed Width47 Width22 DepthG Glides613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$68 list for casters.
2. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
Base comes with worksurfacemounting hardware.
22�D C-Leg bases supportrectangular tops up to 24�D. 28�DC-Leg bases support rectangulartops up to 30�D. 28�D T-Leg basessupport rectangular tops up to 36�Dcentered over feet. 16�D Cornerbases support 48� x 48� corner topsup to 30�D.
Pin-Set bases have a height range of25.8� - 40.8� (base only) with a loadcapacity of 265 lbs.
Tone Height Adjustable Tables GSA
12
Pin-SetAdjustable Width Base
description type w* d pattern no. list price
24� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 291/2� - 451/4� 22� TBCPAS22( ) $1,500.Medium - For use with 42� - 78� wide tops 411/2� - 691/4� 22� TBCPAM22( ) 1,523.Large - For use with 66� - 96� wide tops 611/2� - 891/4� 22� TBCPAL22( ) 1,545.
30� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 291/2� - 451/4� 28� TBCPAS28( ) 1,568.Medium - For use with 42� - 78� wide tops 411/2� - 691/4� 28� TBCPAM28( ) 1,591.Large - For use with 66� - 96� wide tops 611/2� - 891/4� 28� TBCPAL28( ) 1,614.
30� Deep T-Leg Bases Small - For use with 30� - 54� wide tops 291/2� - 451/4� 28� TBTPAS28( ) 1,568.Medium - For use with 42� - 78� wide tops 411/2� - 691/4� 28� TBTPAM28( ) 1,591.Large - For use with 66� - 96� wide tops 611/2� - 891/4� 28� TBTPAL28( ) 1,614.
C-Leg Corner Bases For use with 48�, 54�, 60� corner Tops and48� x 66�, 72�, 84� extended corner tops
431/4� - 703/4� 16� TBKPAM16( ) 2,205.
Order Code
C-Leg and T-Leg Bases
Example: TBCPAM22C,613
TB Tone BaseC C-LegP Pin-SetA Adjustable WidthM Medium22 DepthC Casters613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$68 list for casters.
2. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
Base comes with worksurfacemounting hardware.
22�D C-Leg bases supportrectangular tops up to 24�D. 28�DC-Leg bases support rectangulartops up to 30�D. 28�D T-Leg basessupport rectangular tops up to 36�Dcentered over feet. 16�D Cornerbases support 48�, 54� 60� W cornertops up to 30�D as well as 48� x 66�,72�, 84�W extended corner tops upto 30�D.
Adjustable Width Crossbars comein three sizes: Small, Medium,Large.Small fits tops 30� - 54� wideMedium fits tops 42� - 78� wideLarge fits tops 66� - 96� wide
Note that 30�, 36�, 45�, 69�, 84�,90�, 96� undersized tops are not partof our standard scope for Tone.
Actual Dimensions for Adjustablecrossbar are:Small 291/2� - 451/4�Medium 411/2� - 691/4�Large 611/2� - 891/4�
Pin-Set bases have a height range of25.8� - 40.8� (base only) with a loadcapacity of 265 lbs.
Tone Height Adjustable Tables GSA
13
Fixed HeightFixed Width Base
description type w* w d pattern no. list price
24� Deep C-Leg Bases For use with 42�W, 24�D C-Leg Top 42� 35� 22� TBCFF3522( ) $1,205.For use with 48�W, 24�D C-Leg Top 48� 41� 22� TBCFF4122( ) 1,205.For use with 54�W, 24�D C-Leg Top 54� 47� 22� TBCFF4722( ) 1,205.For use with 60�W, 24�D C-Leg Top 60� 53� 22� TBCFF5322( ) 1,205.For use with 66�W, 24�D C-Leg Top 66� 59� 22� TBCFF5922( ) 1,227.For use with 72�W, 24�D C-Leg Top 72� 65� 22� TBCFF6522( ) 1,227.For use with 78�W, 24�D C-Leg Top 78� 71� 22� TBCFF7122( ) 1,227.
30� Deep C-Leg Bases For use with 42�W, 30�D C-Leg Top 42� 35� 28� TBCFF3528( ) 1,250.For use with 48�W, 30�D C-Leg Top 48� 41� 28� TBCFF4128( ) 1,250.For use with 54�W, 30�D C-Leg Top 54� 47� 28� TBCFF4728( ) 1,250.For use with 60�W, 30�D C-Leg Top 60� 53� 28� TBCFF5328( ) 1,250.For use with 66�W, 30�D C-Leg Top 66� 59� 28� TBCFF5928( ) 1,273.For use with 72�W, 30�D C-Leg Top 72� 65� 28� TBCFF6528( ) 1,273.For use with 78�W, 30�D C-Leg Top 78� 71� 28� TBCFF7128( ) 1,273.
30� Deep T-Leg Bases For use with 48�W, 30� or 36�D T-Leg Top 48� 41� 28� TBTFF4128( ) 1,250.For use with 54�W, 30� or 36�D T-Leg Top 54� 47� 28� TBTFF4728( ) 1,250.For use with 60�W, 30� or 36�D T-Leg Top 60� 53� 28� TBTFF5328( ) 1,250.For use with 66�W, 30� or 36�D T-Leg Top 66� 59� 28� TBTFF5928( ) 1,273.For use with 72�W, 30� or 36�D T-Leg Top 72� 65� 28� TBTFF6528( ) 1,273.
C-Leg Corner Base For use with 48�W Corner C-Leg Top 48� 44� 16� TBKFF444416( ) 1,750.
Order Code
C-Leg and T-Leg Bases
Example: TBCFF4722G,613
TB Tone BaseC C-LegF FixedF Fixed Width47 Width22 DepthG Glides613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$68 list for casters.
2. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
Base comes with worksurfacemounting hardware.
22�D C-Leg bases supportrectangular tops up to 24�D. 28�DC-Leg bases support rectangulartops up to 30�D. 28�D T-Leg basessupport rectangular tops up to 36�Dcentered over feet. 16�D Cornerbases support 48� x 48� corner topsup to 30�D.
Fixed bases are 26.8�H (base only)with a load capacity of 265 lbs.
Tone Height Adjustable Tables GSA
14
Fixed HeightAdjustable Width Base
description type w* d pattern no. list price
24� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 291/2� - 451/4� 22� TBCFAS22( ) $1,273.Medium - For use with 42� - 78� wide tops 411/2� - 691/4� 22� TBCFAM22( ) 1,295.Large - For use with 66� - 96� wide tops 611/2� - 891/4� 22� TBCFAL22( ) 1,318.
30� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 291/2� - 451/4� 28� TBCFAS28( ) 1,341.Medium - For use with 42� - 78� wide tops 411/2� - 691/4� 28� TBCFAM28( ) 1,364.Large - For use with 66� - 96� wide tops 611/2� - 891/4� 28� TBCFAL28( ) 1,386.
30� Deep T-Leg Bases Small - For use with 30� - 54� wide tops 291/2� - 451/4� 28� TBTFAS28( ) 1,341.Medium - For use with 42� - 78� wide tops 411/2� - 691/4� 28� TBTFAM28( ) 1,364.Large - For use with 66� - 96� wide tops 611/2� - 891/4� 28� TBTFAL28( ) 1,386.
C-Leg Corner Bases For use with 48�, 54�, 60� corner Tops and48� x 66�, 72�, 84� extended corner tops
431/4� - 703/4� 16� TBKFAM16( ) 1,886.
Order Code
C-Leg and T-Leg Bases
Example: TBCFAM22C,613
TB Tone BaseC C-LegF FixedA Adjustable WidthM Medium22 DepthC Casters613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$68 list for casters.
2. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
Base comes with worksurfacemounting hardware.
22�D C-Leg bases supportrectangular tops up to 24�D. 28�DC-Leg bases support rectangulartops up to 30�D. 28�D T-Leg basessupport rectangular tops up to 36�Dcentered over feet. 16�D Cornerbases support 48�, 54� 60� W cornertops up to 30�D as well as 48� x 66�,72�, 84�W extended corner tops upto 30�D.
Adjustable Width Crossbars comein three sizes: Small, Medium,Large.Small fits tops 30� - 54� wideMedium fits tops 42� - 78� wideLarge fits tops 66� - 96� wide
Note that 30�, 36�, 45�, 69�, 84�,90�, 96� undersized tops are not partof our standard scope for Tone.
Actual Dimensions for Adjustablecrossbar are:Small 291/2� - 451/4�Medium 411/2� - 691/4�Large 611/2� - 891/4�
Fixed bases are 26.8�H (base only)with a load capacity of 265 lbs.
Tone Height Adjustable Tables GSA
15
Antenna Workspaces WorksurfacesC-Leg and T-Leg Tables24�, 30� and 36� Deep Rectangular
description type w* w d h pattern no. L V1 V2 V3
Antenna C-Leg Tops, 24� Deep For use with 24�D C-Leg Base 42� 39� 24� 11/4� TTYR3924( ) $264. $488. $562. $757.48� 45� 24� 11/4� TTYR4524( ) 295. 510. 586. 793.54� 51� 24� 11/4� TTYR5124( ) 320. 544. 626. 846.60� 57� 24� 11/4� TTYR5724( ) 345. 579. 666. 900.66� 63� 24� 11/4� TTYR6324( ) 373. 603. 693. 935.72� 69� 24� 11/4� TTYR6924( ) 388. 625. 720. 971.
Antenna C-Leg and T-Leg Tops, 30� Deep For use with 30�D C-Leg Base 42� 39� 30� 11/4� TTYR3930( ) 312. 534. 614. 828.
For use with 30�D C-Leg or T-Leg Bases 48� 45� 30� 11/4� TTYR4530( ) 345. 574. 660. 890.54� 51� 30� 11/4� TTYR5130( ) 392. 608. 699. 944.60� 57� 30� 11/4� TTYR5730( ) 431. 643. 738. 997.66� 63� 30� 11/4� TTYR6330( ) 481. 654. 753. 1,017.72� 69� 30� 11/4� TTYR6930( ) 498. 677. 779. 1,051.78� 75� 30� 11/4� TTYR7530( ) 533. 715. 811. 1,096.
Antenna T-Leg Tops, 36� Deep For use with 30�D T-Leg Base 48� 45� 36� 11/4� TTYR4536( ) 378. 619. 713. 961.54� 51� 36� 11/4� TTYR5136( ) 429. 654. 753. 1,017.60� 57� 36� 11/4� TTYR5736( ) 475. 689. 792. 1,069.66� 63� 36� 11/4� TTYR6336( ) 528. 723. 831. 1,121.72� 69� 36� 11/4� TTYR6936( ) 548. 757. 871. 1,177.78� 75� 36� 11/4� TTYR7536( ) 584. 792. 911. 1,229.
* Nominal Width
Order Code
Example: TTYR5724L118118
TT Tone TopY AntennaR Rectangular57 Width24 DepthL Laminate118 Bright White Laminate118 Bright White Edge
Application Notes
Worksurfaces on this page aredesigned for use with fixed andheight adjustable C-Leg and T-Legbases to create freestanding tables.
24�, 30� and 36� rectangularworksurfaces are for use withcorresponding depth fixed andheight adjustable C-Leg bases andT-Leg bases.
Worksurfaces are pre-drilled withpilot holes for use with wood screws.
Actual worksurfaces are undersizedby 11/2� on each side edge.
Options
Top finish Options:Add an (L) for laminate or (V) forveneer suffix to pattern number.
Tone Height Adjustable Tables GSA
16
AutoStrada WorksurfacesC-Leg and T-Leg Tables24�, 30� and 36� Deep Rectangular
description type w* w d* d h pattern no. L V1 V2 V3
AutoStrada C-Leg Tops, 24� Deep For use with 24�D C-Leg Base 42� 40� 24 23� 11/4� TTAR4023( )N $439. $629. $722. $939.48� 46� 24 23� 11/4� TTAR4623( )N 452. 674. 774. 1,006.54� 52� 24 23� 11/4� TTAR5223( )N 532. 720. 829. 1,078.60� 58� 24 23� 11/4� TTAR5823( )N 585. 771. 886. 1,150.66� 64� 24 23� 11/4� TTAR6423( )N 602. 800. 915. 1,191.72� 70� 24 23� 11/4� TTAR7023( )N 617. 833. 960. 1,248.78� 76� 24 23� 11/4� TTAR7623( )N 638. 872. 1,006. 1,308.
AutoStrada C-Leg/T-Leg Tops, 30� Deep For use with 30�D C-Leg Base 42� 40� 30� 29� 11/4� TTAR4029( )N 485. 710. 816. 1,061.
For use with 30�D C-Leg or T-Leg Base 48� 46� 30� 29� 11/4� TTAR4629( )N 537. 759. 875. 1,140.54� 52� 30� 29� 11/4� TTAR5229( )N 550. 821. 944. 1,228.60� 58� 30� 29� 11/4� TTAR5829( )N 614. 852. 978. 1,271.66� 64� 30� 29� 11/4� TTAR6429( )N 628. 871. 1,001. 1,302.72� 70� 30� 29� 11/4� TTAR7029( )N 648. 894. 1,027. 1,335.78� 76� 30� 29� 11/4� TTAR7629( )N 668. 934. 1,077. 1,397.
AutoStrada T-Leg Tops, 36� Deep For use with 30�D T-Leg Base 48� 46� 36� 35� 11/4� TTAR4635( )N 589. 996. 1,129. 1,429.54� 52� 36� 35� 11/4� TTAR5235( )N 667. 1,088. 1,216. 1,537.60� 58� 36� 35� 11/4� TTAR5835( )N 691. 1,081. 1,222. 1,542.66� 64� 36� 35� 11/4� TTAR6435( )N 729. 1,092. 1,234. 1,565.72� 70� 36� 35� 11/4� TTAR7035( )N 738. 1,117. 1,267. 1,603.78� 76� 36� 35� 11/4� TTAR7635( )N 770. 1,141. 1,294. 1,640.
* Nominal
Order Code
Example: TTAR4623( )N118
TT Tone TopA AutoStradaR Rectangular46 Width23 DepthL LaminateN No Grommet118 Bright White Laminate
Application Notes
Worksurfaces on this page aredesigned for use with fixed andheight adjustable C-Leg and T-Legbases to create freestanding tables.
23�, 29� and 35� rectangularworksurfaces are for use withcorresponding depth fixed andheight adjustable C-Leg bases andT-Leg bases.
23� and 29� worksurfaces are useredge tapered. 35� worksurfaces areuser and approach edges tapered.
Worksurfaces are pre-drilled withpilot holes for use with wood screws.
Actual worksurfaces are undersizedby 1� on each side edge and by 1�on the back edge.
Options
Top finish Options:Add an (L) for laminate or (V) forveneer suffix to pattern number.
Tone Height Adjustable Tables GSA
17
Dividends Horizon WorksurfacesC-Leg and T-Leg Tables24�, 30� and 36� Deep Rectangular and Curvilinear Corners
description type w* w d* d h pattern no.
Laminatew/ ABS
edge
Laminate w/woodgrain
edge
Techwood w/Techwood
edge
Dividends Horizon C-Leg Tops,24� Deep
For use with 24�D C-Leg Base 42� 40� 24� 23� 11/4� TTDR4023N $267. $292. $511.48� 46� 24� 23� 11/4� TTDR4623N 297. 329. 536.54� 52� 24� 23� 11/4� TTDR5223N 324. 356. 564.60� 58� 24� 23� 11/4� TTDR5823N 351. 383. 592.66� 64� 24� 23� 11/4� TTDR6423N 376. 414. 617.72� 70� 24� 23� 11/4� TTDR7023N 393. 434. 645.78� 76� 24� 23� 11/4� TTDR7623N 422. 463. 675.
Dividends Horizon C-Leg/T-Leg Tops,30� Deep
For use with 30�D C-Leg Base 42� 40� 30� 29� 11/4� TTDR4029N 315. 344. 555.
For use with 30�D C-Leg or T-Leg Base 48� 46� 30� 29� 11/4� TTDR4629N 351. 383. 590.54� 52� 30� 29� 11/4� TTDR5229N 397. 435. 615.60� 58� 30� 29� 11/4� TTDR5829N 436. 480. 642.66� 64� 30� 29� 11/4� TTDR6429N 484. 534. 666.72� 70� 30� 29� 11/4� TTDR7029N 504. 552. 691.78� 76� 30� 29� 11/4� TTDR7629N 538. 595. 724.
Dividends Horizon T-Leg Tops,36� Deep
For use with 30�D T-Leg Base 48� 46� 36� 35� 11/4� TTDR4635N 459. 492. 700.54� 52� 36� 35� 11/4� TTDR5235N 506. 544. 725.60� 58� 36� 35� 11/4� TTDR5835N 558. 613. 761.66� 64� 36� 35� 11/4� TTDR6435N 616. 680. 787.72� 70� 36� 35� 11/4� TTDR7035N 680. 749. 817.78� 76� 36� 35� 11/4� TTDR7635N 724. 770. 822.
Dividends Horizon C-Leg Tops,24� or 30� Deep
For use with C-Leg Corner Base 48� 46� 24� 23� 11/4� TTDK464623N 617. 683. 1,179.48� 46� 30� 29� 11/4� TTDK464629N 666. 734. 1,193.
* Nominal
Order Code
Example: TTDR4029NL118
TT Tone TopD Dividends HorizonR Rectangular40 Width29 DepthN No GrommetL Laminate118 Bright White Laminate
Application Notes
Worksurfaces on this page aredesigned for use with fixed andheight adjustable C-Leg, T-Leg andcorner bases to create freestandingtables.
23�, 29� and 35� rectangularworksurfaces are for use withcorresponding depth fixed andheight adjustable C-Leg bases andT-Leg bases.
48� x 48� curvilinear cornerworksurfaces are for use with 16�D3-legged fixed and height adjustablecorner bases.
Worksurfaces are pre-drilled withpilot holes for use with wood screws.
Actual worksurfaces are undersizedby 1� on each side edge and by 1�on the back edge.
Options
Top Finish Options:Laminate with ABS edgeLaminate with woodgrain edgeTechwood with techwood edge
Note: When woodgrain laminatesare specified on cornerworksurfaces a grain directionoption must be specified.(L) = Left(R) = Right(D) = Diagonal (Add $26 to listprice)
Note: Techwood cornerworksurfaces have a diagonal graindirection. See grain direction pagefor more information.
Tone Height Adjustable Tables GSA
18
Morrison WorksurfacesC-Leg and T-Leg Tables24�, 30� and 36� Deep Rectangular and Curvilinear Corners
description type w* w d* d h pattern no. L V1 V2
Morrison C-Leg Tops, 24� Deep For use with 24�D C-Leg Base 42� 40� 24� 23� 11/4� TTMR4023( ) $345. $577. $859.48� 46� 24� 23� 11/4� TTMR4623( ) 379. 624. 980.54� 52� 24� 23� 11/4� TTMR5223( ) 416. 701. 1,071.60� 58� 24� 23� 11/4� TTMR5823( ) 448. 735. 1,126.66� 64� 24� 23� 11/4� TTMR6423( ) 485. 812. 1,245.72� 70� 24� 23� 11/4� TTMR7023( ) 519. 866. 1,364.78� 76� 24� 23� 11/4� TTMR7623( ) 553. 893. 1,423.
Morrison C-Leg/T-Leg Tops, 30� Deep For use with 30�D C-Leg Base 42� 40� 30� 29� 11/4� TTMR4029( ) 395. 644. 993.
For use with 30�D C-Leg or T-Leg Base 48� 46� 30� 29� 11/4� TTMR4629( ) 432. 698. 1,069.54� 52� 30� 29� 11/4� TTMR5229( ) 465. 775. 1,166.60� 58� 30� 29� 11/4� TTMR5829( ) 501. 829. 1,264.66� 64� 30� 29� 11/4� TTMR6429( ) 534. 881. 1,378.72� 70� 30� 29� 11/4� TTMR7029( ) 586. 954. 1,472.78� 76� 30� 29� 11/4� TTMR7629( ) 622. 1,003. 1,549.
Morrison T-Leg Tops, 36� Deep For use with 30�D T-Leg Base 48� 46� 36� 35� 11/4� TTMR4635( ) 485. 772. 1,159.54� 52� 36� 35� 11/4� TTMR5235( ) 514. 851. 1,261.60� 58� 36� 35� 11/4� TTMR5835( ) 554. 924. 1,401.66� 64� 36� 35� 11/4� TTMR6435( ) 580. 951. 1,510.72� 70� 36� 35� 11/4� TTMR7035( ) 652. 1,041. 1,579.
Morrison C-Leg Tops, 24� or 30� Deep For use with C-Leg Corner Base 48� 46� 24� 23� 11/4� TTMK464623( ) 895. 1,219. 1,792.48� 46� 30� 29� 11/4� TTMK464629( ) 895. 1,219. 1,792.
* Nominal
Order Code
Example: TTMR4635L118
TT Tone TopM MorrisonR Rectangular46 Width35 DepthL Laminate118 Bright White Laminate
Application Notes
Worksurfaces on this page aredesigned for use with fixed andheight adjustable C-Leg, T-Leg andcorner bases to create freestandingtables.
23�, 29� and 35� rectangularworksurfaces are for use withcorresponding depth fixed andheight adjustable C-Leg bases andT-Leg bases.
48� x 48� curvilinear cornerworksurfaces are for use with 16�D3-legged fixed and height adjustablecorner bases.
Worksurfaces are pre-drilled withpilot holes for use with wood screws.
Actual worksurfaces are undersizedby 1� on each side edge and by 1�on the back edge.
Options
Top finish Options:Add an (L) for laminate or (V) forveneer suffix to pattern number.
Tone Height Adjustable Tables GSA
19
Reff Profiles WorksurfacesC-Leg and T-Leg Tables24�, 30� and 36� Deep Rectangular and Curvilinear Corners
description type w* w d* d h pattern no. L V1 V2 V3
Reff Profiles C-Leg Tops, 24� Deep For use with 24�D C-Leg Base 42� 40� 24� 23� 11/4� TTRR4023N $435. $482. $555. $747.48� 46� 24� 23� 11/4� TTRR4623N 461. 519. 595. 802.54� 52� 24� 23� 11/4� TTRR5223N 492. 551. 636. 857.60� 58� 24� 23� 11/4� TTRR5823N 533. 490. 678. 917.66� 64� 24� 23� 11/4� TTRR6423N 545. 610. 703. 948.72� 70� 24� 23� 11/4� TTRR7023N 574. 638. 736. 993.78� 76� 24� 23� 11/4� TTRR7623N 598. 667. 772. 1,039.
Reff Profiles C-Leg/T-Leg Tops, 30� Deep For use with 30�D C-Leg Base 42� 40� 30� 29� 11/4� TTRR4029N 489. 545. 629. 850.
For use with 30�D C-Leg or T-Leg Base 48� 46� 30� 29� 11/4� TTRR4629N 524. 583. 668. 904.54� 52� 30� 29� 11/4� TTRR5229N 566. 631. 722. 975.60� 58� 30� 29� 11/4� TTRR5829N 587. 651. 749. 1,013.66� 64� 30� 29� 11/4� TTRR6429N 597. 666. 771. 1,038.72� 70� 30� 29� 11/4� TTRR7029N 615. 684. 784. 1,059.78� 76� 30� 29� 11/4� TTRR7629N 643. 715. 823. 1,110.
Reff Profiles T-Leg Tops, 36� Deep For use with 30�D T-Leg Base 48� 46� 36� 35� 11/4� TTRR4635N 592. 662. 762. 1,023.54� 52� 36� 35� 11/4� TTRR5235N 646. 721. 825. 1,110.60� 58� 36� 35� 11/4� TTRR5835N 675. 752. 863. 1,165.66� 64� 36� 35� 11/4� TTRR6435N 699. 778. 898. 1,211.72� 70� 36� 35� 11/4� TTRR7035N 723. 806. 927. 1,252.78� 76� 36� 35� 11/4� TTRR7635N 748. 834. 959. 1,296.
Reff Profiles C-Leg Tops, 24� or 30� Deep For use with C-Leg Corner Base 48� 46� 24� 23� 11/4� TTRK464623N 995. 1,144. 1,312. 1,770.48� 46� 30� 29� 11/4� TTRK464629N 1,114. 1,280. 1,468. 1,978.
* Nominal
Order Code
Example: TTRR5229NL118
TT Tone TopR Reff ProfilesR Rectangular52 Width29 DepthN No GrommetL Laminate118 Bright White Laminate
Application Notes
Worksurfaces on this page aredesigned for use with fixed andheight adjustable C-Leg, T-Leg andcorner bases to create freestandingtables.
23�, 29� and 35� rectangularworksurfaces are for use withcorresponding depth fixed andheight adjustable C-Leg bases andT-Leg bases.
48�x48� curvilinear cornerworksurfaces are for use with 16�D3-legged fixed and height adjustablecorner bases.
Worksurfaces are pre-drilled withpilot holes for use with wood screws.
Actual worksurfaces are undersizedby 1� on each side edge and by 1�on the back edge.
Options
Top finish Options:Add an (L) for laminate or (V) forveneer suffix to pattern number.
Tone Height Adjustable Tables GSA
20
pattern no. page
TBCEAL22 9
TBCEAL28 9
TBCEAM22 9
TBCEAM28 9
TBCEAS22 9
TBCEAS28 9
TBCEF3522 8
TBCEF3528 8
TBCEF4122 8
TBCEF4128 8
TBCEF4722 8
TBCEF4728 8
TBCEF5322 8
TBCEF5328 8
TBCEF5922 8
TBCEF5928 8
TBCEF6522 8
TBCEF6528 8
TBCEF7122 8
TBCEF7128 8
TBCEXAL22 11
TBCEXAL28 11
TBCEXAM22 11
TBCEXAM28 11
TBCEXAS22 11
TBCEXAS28 11
TBCEXF3522 10
TBCEXF3528 10
TBCEXF4122 10
TBCEXF4128 10
TBCEXF4722 10
TBCEXF4728 10
TBCEXF5322 10
TBCEXF5328 10
TBCEXF5922 10
TBCEXF5928 10
TBCEXF6522 10
TBCEXF6528 10
TBCEXF7122 10
TBCEXF7128 10
TBCFAL22 15
TBCFAL28 15
TBCFAM22 15
TBCFAM28 15
TBCFAS22 15
TBCFAS28 15
TBCFF3522 14
TBCFF3528 14
TBCFF4122 14
TBCFF4128 14
TBCFF4722 14
TBCFF4728 14
TBCFF5322 14
TBCFF5328 14
TBCFF5922 14
TBCFF5928 14
TBCFF6522 14
TBCFF6528 14
TBCFF7122 14
TBCFF7128 14
TBCPAL22 13
pattern no. page
TBCPAL28 13
TBCPAM22 13
TBCPAM28 13
TBCPAS22 13
TBCPAS28 13
TBCPF3522 12
TBCPF3528 12
TBCPF4122 12
TBCPF4128 12
TBCPF4722 12
TBCPF4728 12
TBCPF5322 12
TBCPF5328 12
TBCPF5922 12
TBCPF5928 12
TBCPF6522 12
TBCPF6528 12
TBCPF7122 12
TBCPF7128 12
TBKEAM16 9
TBKEF444416 8
TBKEXAM16 11
TBKEXF444416 10
TBKFAM16 15
TBKFF444416 14
TBKPAM16 13
TBKPF444416 12
TBTEAL28 9
TBTEAM28 9
TBTEAS28 9
TBTEF4128 8
TBTEF4728 8
TBTEF5328 8
TBTEF5928 8
TBTEF6528 8
TBTEF7128 8
TBTEXAL28 11
TBTEXAM28 11
TBTEXAS28 11
TBTEXF4128 10
TBTEXF4728 10
TBTEXF5328 10
TBTEXF5928 10
TBTEXF6528 10
TBTEXF7128 10
TBTFAL28 15
TBTFAM28 15
TBTFAS28 15
TBTFF4128 14
TBTFF4728 14
TBTFF5328 14
TBTFF5928 14
TBTFF6528 14
TBTPAL28 13
TBTPAM28 13
TBTPAS28 13
TBTPF4128 12
TBTPF4728 12
TBTPF5328 12
TBTPF5928 12
TBTPF6528 12
pattern no. page
TTAR4023 17
TTAR4029 17
TTAR4623 17
TTAR4629 17
TTAR4635 17
TTAR5223 17
TTAR5229 17
TTAR5235 17
TTAR5823 17
TTAR5829 17
TTAR5835 17
TTAR6423 17
TTAR6429 17
TTAR6435 17
TTAR7023 17
TTAR7029 17
TTAR7035 17
TTAR7623 17
TTAR7629 17
TTAR7635 17
TTDK464623N 18
TTDK464629N 18
TTDR4023N 18
TTDR4029N 18
TTDR4623N 18
TTDR4629N 18
TTDR4635N 18
TTDR5223N 18
TTDR5229N 18
TTDR5235N 18
TTDR5823N 18
TTDR5829N 18
TTDR5835N 18
TTDR6423N 18
TTDR6429N 18
TTDR6435N 18
TTDR7023N 18
TTDR7029N 18
TTDR7035N 18
TTDR7623N 18
TTDR7629N 18
TTDR7635N 18
TTMK464623 19
TTMK464629 19
TTMR4023 19
TTMR4029 19
TTMR4623 19
TTMR4629 19
TTMR4635 19
TTMR5223 19
TTMR5229 19
TTMR5235 19
TTMR5823 19
TTMR5829 19
TTMR5835 19
TTMR6423 19
TTMR6429 19
TTMR6435 19
TTMR7023 19
TTMR7029 19
TTMR7035 19
pattern no. page
TTMR7623 19
TTMR7629 19
TTRK464623N 20
TTRK464629N 20
TTRR4023N 20
TTRR4029N 20
TTRR4623N 20
TTRR4629N 20
TTRR4635N 20
TTRR5223N 20
TTRR5229N 20
TTRR5235N 20
TTRR5823N 20
TTRR5829N 20
TTRR5835N 20
TTRR6423N 20
TTRR6429N 20
TTRR6435N 20
TTRR7023N 20
TTRR7029N 20
TTRR7035N 20
TTRR7623N 20
TTRR7629N 20
TTRR7635N 20
TTYR3924 16
TTYR3930 16
TTYR4524 16
TTYR4530 16
TTYR4536 16
TTYR5124 16
TTYR5130 16
TTYR5136 16
TTYR5724 16
TTYR5730 16
TTYR5736 16
TTYR6324 16
TTYR6330 16
TTYR6336 16
TTYR6924 16
TTYR6930 16
TTYR6936 16
TTYR7530 16
TTYR7536 16
Alpha-Numeric Index
21
General Ordering Information
The ProductsThis guide encompasses all standard products for this product group.
SizesDimensions listed in this guide are indicated as:H = heightW = widthD = depthDia. = diameterRad. = radius
PricingAll prices shown are list.
How to OrderSelect pattern numbers and quantities required for your complete installation. Product questions can beaddressed in the specific sections of this guide or by contacting your sales representative or customerresource representative at 1-800-343-5665.
Next, select options (if required), along with colors and finishes appropriate to each product. Reference theFinishes and Fabrics pages for color designations.
On large installations, an item’s ‘‘designated area’’ can be specified to assist in product organization andhandling.
To expedite complete / correct entry of your order, be certain all pattern numbers, quantities, colors andarea identifications are completely specified. Also, include complete purchase order numbers, bill-to andship-to addresses, a contact name and specific factory shipping dates required.
Mail all orders to:Knoll, Inc.c/o Knoll Participating Dealer1235 Water StreetP.O. Box 157East Greenville, PA 18041Attention: Order Entry
Once your order is entered at Knoll, an acknowledgment will be mailed to you. You will be advised of yourscheduled shipping date within five days of the original acknowledgment. If it is necessary to revise yourorder, please contact your customer resource representative.
Sustainability Statement
Sustainable design is a key component of Knoll’s environmental focus. Our commitment to socialresponsibility and a healthy environment has prompted us to further articulate our longstandingenvironmental programs and, with encouragement and support from our colleagues in the industry, we havere-energized our focus on such �green� initiatives as life cycle analysis and LEED™ certification. Knoll isproud to have contributed to projects that have received LEED certification from the U.S. Green BuildingCouncil.
For the latest information on Knoll products that help our customers achieve LEED certification, log on toknoll.com, click on ‘‘About Knoll’’ and then ‘‘Environmental Focus.’’
22
Knoll, Inc.P.O. Box 1571235 Water StreetEast Greenville, PA 18041
(215) 679-7991www.knoll.com PLTHAGSA0214