To_Draw_A_Bolt

7/30/2019 To_Draw_A_Bolt

1/7

August 12, 2008 [LEARN TO DRAW A BOLT]

3DCADMODEL Tutorial |http://3dcadmodel.blogspot.com 1

There are five steps to draw a Bolt

1. Create the Extrusion

1. Click Extruded Boss/Base on the Features toolbar.The Front, Top, and Right planes appear, and the pointer changes to .

2. Select the Front plane.3. In Toolbar Menu, select Tool, Sketch Entities, Polygon4. Move the pointer to the sketch origin. Click the origin , then move the pointer

vertically to create a polygon.

5. In the Property Manager, under Parameters: Set Number of Sides to 6. Click Inscribed circle. Set Circle Diameter to 18.

6. Click OK .

7. Click Exit Sketch on the Sketch toolbar.8. In the Property Manager, under Direction 1:

Select Blind in End Condition. Set Depth to 6.9.
http://3dcadmodel.blogspot.com/http://3dcadmodel.blogspot.com/http://3dcadmodel.blogspot.com/http://3dcadmodel.blogspot.com/


2/7



9. Click OK to create the extrusion.10.Click Extruded Boss/Base on the Features toolbar.11.Move the pointer over the front face of the part. And select the front face of

the part.

12.Click Circle on the Sketch toolbar.13.Move the pointer to the sketch origin. Click the origin , then move the pointer

to create a circle.

14.In the Property Manager, under Parameters: Set Radius to 8.3.

15.Click Exit Sketch on the Sketch toolbar.16.In the Property Manager, under Direction 1:

Select Blindl in End Condition. Set Depth to 0.6.

17.Click OK to create the extrusion.18.Click Extruded Boss/Base on the Features toolbar.19.Move the pointer over the front face of the part. And select the front face of

the part.


3/7



20.Click Circle on the Sketch toolbar.21.Move the pointer to the sketch origin. Click the origin , then move the pointer

to create a circle.22.In the Property Manager, under Parameters:

Set Radius to 6.23.Click Exit Sketch on the Sketch toolbar.24.In the Property Manager, under Direction 1:

Select Blind in End Condition. Set Depth to 50.

25.Click OK to create the extrusion.

2. Adding Chamfer1. Click Chamfer on the Features toolbar.2. In the Property Manager, under Chamfer Parameters:

Select Edge ofExtrude3 in Edges and Faces or Vertex. Set Distance to 1. Set Angle to 45.


4/7



3. Click OK .3. Sketching a Helix and Cut Sweep

1. Click Helix and Spiral on the Features toolbar.2. Select the front face of the part.

3. Click Circle on the Sketch toolbar.4. Click the origin , then move the pointer to create a circle.5. In the Property Manager, under Parameters:

Set Radius to 5.05.


5/7



6. Click Exit Sketch on the Sketch toolbar.7. In the Property Manager, under Defined By:

Select Height and Pitch.

8. In the Property Manager, under Parameters: Set Height to 46. Set Pitch to 1.75. Click Reverse direction. Set Start Angle to 0.

9. Click OK .10.In FeatureManager design tree clilck Top Plane, right click and select Insert

Sketch.

11. Select Normal To in Standard View Toolbars.12.In Toolbar Menu, select Tool, Sketch Entities,Polygon13.Move the pointer to the up-right of part. Click, then move the pointer down-

vertically to create a polygon.

14.In the Property Manager, under Parameters: Set Number of Sides to 3. Click Circumscribed circle. Set Center X Coordinate to 58. Set Center Y Coordinate to 6. Set Circle Diameter to 2.15.


6/7



15.Click Exit Sketch on the Sketch toolbar.4. Creating the Cut Sweep

1. In FeatureManager design tree clilck Sketch52. In Toolbar Menu, select Insert,Cut, Sweep 3. In the Property Manager, under Profile and Path:

Click in Path Select Helix/Spiral1 in Path.

4. Click OK .


7/7



5. Creating the Cut1. Click Rotate View on the View toolbar and drag to rotate and see the

other side part.

2. Click Extruded Cut on the Features toolbar.3. Move the pointer over the front face of the part. And select the front face of the part.4. Click Circle on the Sketch toolbar.5. Move the pointer to the sketch origin. Click the origin , then move the pointer

to create a circle.

6. In the Property Manager, under Parameters: Set Radius to 9.

7. Click Exit Sketch on the Sketch toolbar.8. In the Property Manager, under Direction 1:

Select Through All in End Condition. Click Flip to side cut Click Draft On/Off Set DraftAngle to 60.

9. Click OK to create the cut extrusion.Congratulations! You have completed this lesson.

Documents

To_Draw_A_Bolt