Upload
maressa-mcgilligan
View
292
Download
10
Embed Size (px)
Citation preview
Block PavingPermeable Paving
Paving FlagsSteps
Kerbs, Edging & ChannelsWalling & Masonry
Retaining WallsEco Paving & Walling
Paving & WallingSpecification Guidev 2.1
Sienna Duo Silver | Heathrow Terminal 2, London
visit www.tobermore.co.uk | call us 0844 800 5736 | follow usvisit www.tobermore.co.uk | call us 0844 800 5736 | follow us
the company
block paving
hydropave permeable paving
paving flags
steps
kerbs, edging & channels
walling & masonry
secura retaining walls
eco paving & walling
Fifty acre site
Rainwater Harvesting System
Innovative Machinery and cutting-edge technology
Large stockpiles so product is readily available
Continuous Investment
4
Tobe
rmor
e
Tobermore Head Office & Manufacturing Plant | Tobermore, Northern Ireland
Wind Turbine Installed in 2015
Solar Panels
5
Tobe
rmor
e
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
our company
Founded in 1942, Tobermore is a UK and European Quality Award winning company. We are dedicated to excellence in the manufacture and supply of paving and walling for the domestic and commercial markets throughout the UK and Ireland.
At Tobermore, we seek to build lasting relationships with our customers by surpassing their expectations in quality and service. We believe in conducting our business in a manner, which achieves sustainable growth whilst maintaining a high degree of integrity, trust, honesty and teamwork.
6
Tobe
rmor
e
ourpeople
Our people are the backbone to our company. They understand the importance of customer relationships. People buy from people. Our success is a testament to how customers appreciate our staff who have been trained and developed to deal professionally with all customer requirements. We believe in business excellence and have implemented a culture of continuous improvement with our people. This has been the key to our success and has enabled the company to develop and improve our business processes to meet our customers’ needs.
58% of our people have been with the company for over 10 years
David Henderson in 2005 with the UK Business Excellence Award along with Tobermore Head Office staff
7
Tobe
rmor
e
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
awards &recognitions
David Henderson, Managing Director, receives the EFQM Quality award from George Alogoskoufis, Greece Minister of Economy and Finance
Proud to be European Business Excellence Award winners
For details of all our awards and recognitions please visit www.tobermore.co.uk/awards
8
Tobe
rmor
e
our deliveryservice
Visit our Website www.tobermore.co.uk Our dynamic fully-responsive website offers the most up-to-date sales and marketing information about the company.
• Current product details• BIM & NBS Downloads• Brochures• Featured Projects• Picture Gallery• Request a quote function• Cleaning & Maintenance Guidelines
99% of our deliveries in 2013 & 2014 were made on the date requested.
9
Tobe
rmor
e
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
ISLE OF MAN
national salesforce
Over 30 Sales Executivescovering the UK & Ireland. Contact Tobermore for your local Sales Executives details.
non-slip surface
vibrant long-lasting colours
accessiblity/reinstatement
efflorescence significantly reduced
10
Bloc
k Pa
ving
Fusion Silver, Mid Grey & Graphite | Hurst Lane Place, Solihull
hard-wearing surface layer
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 11
Bloc
k Pa
ving
block pavingWith one of the largest block paving ranges in the UK and Ireland, Tobermore have become first choice for architects, developers and building contractors. The benefits of block paving may be measured through a variety of elements. It has the versatility to meet project challenges head-on and can easily handle heavy-duty applications, detailed streetscape designs and sympathetic conservation schemes. In addition, advantages include excellent physical performance, pleasing aesthetic appearance, reconstitution abilities and overall life-long cost-effectiveness.
product range
tegula 12
tegula setts & circles 14
fusion 16
sienna 20
sienna setts & circles 22
chieftain 24
city pave vs5 26
manhattan 28
lincoln 30
shannon 32
toberloc 34
mammut 36
pedesta 38
pembury 40
squaresett 41
retro 42
roma 44
turfstone 46
technical information 49
world class
12
Bloc
k Pa
ving
Tobermore Tegula ‘clean, beautiful colours’
Competitor Equivalent‘soiled, dirty product’
Tegula Trio Heather | Sainsbury’s Store, Penrith
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 13
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
tegulatimeless elegance• Tumbled to give an aged, antique appearance • Evokes timeless style and elegance • Vibrant long-lasting colours*• Significantly reduced efflorescence** • Suitable for both modern or period properties
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Manufacturing process Tumbled to give an aged appearanceEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q24 110Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 50mm:
60mm: 80mm:
18kgCo2e/m2
24kgCo2e/m2
32kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
50/60mm:A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved when used in conjunction with a prepared recycled sub-base.80mm:B, according to the Green Guide to Specification, 4th Edition 2009. A, can be achieved when used in conjunction with a prepared recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
permeable version available
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
TEGULA 50mm 175 x 140 x 50 Bracken, Cedar, Charcoal, Heather, Slate YES 15.43 2.2 40.82 630 1724TEGULA 50mm [void pack] 175 x 140 x 50 Bracken, Cedar, Charcoal, Heather, Slate YES 12.79 1.03 40.82 522 1429TEGULA 50mm [pallet] 140 x 140 x 50 Bracken, Cedar, Charcoal, Heather, Slate YES 13.77 1.53 51 702 1550TEGULA TRIO 50mm [void pack](all three sizes in one pack)
197 x 173 x 50 Bracken, Brindle, Cedar, Charcoal, Golden, Heather, Slate YES 13.05 1.05 33.3 174 1453173 x 173 x 50 174130 x 173 x 50 87
TEGULA 60mm BIM 208 x 173 x 60 Bracken, Cedar, Charcoal, Heather, Natural, Slate YES 12.95 2.16 27.79 360 1810173 x 173 x 60 Bracken, Cedar, Charcoal, Heather, Natural, Slate YES 12.56 1.79 33.41 420 1743240 x 160 x 60 Bracken, Cedar, Charcoal, Heather, Natural, Slate SPECIAL
ORDER 12.5 2.5 26.03 325 1745160 x 160 x 60 Bracken, Cedar, Charcoal, Heather, Natural, Slate SPECIAL
ORDER 11.65 1.66 39.04 454 1630TEGULA TRIO 60mm ML BIM(all three sizes in one pack)
208 x 173 x 60 Bracken, Cedar, Charcoal, Heather, Slate YES 10.5 1.05 33.3 120 1475173 x 173 x 60 110138 x 173 x 60 120
TEGULA 80mm BIM 240 x 160 x 80 Bracken, Cedar, Charcoal, Heather, Natural, Slate SPECIAL ORDER 9.6 1.92 26.03 250 1748
160 x 160 x 80 Bracken, Cedar, Charcoal, Heather, Natural, Slate SPECIAL ORDER 8.96 1.28 39.04 350 1632
120 x 160 x 80 Bracken, Cedar, Charcoal, Heather, Natural, Slate SPECIAL ORDER 9.4 1.34 52.08 490 1719
208 x 173 x 80 Bracken, Cedar, Charcoal, Heather, Natural, Slate YES 9.72 1.62 27.79 270 1770173 x 173 x 80 Bracken, Cedar, Charcoal, Heather, Natural, Slate YES 9.43 1.35 33.41 315 1717104 x 173 x 80 Bracken, Cedar, Charcoal, Heather, Natural, Slate YES 9.07 1.3 55.58 504 1628200 x 100 x 80 Bracken, Charcoal, Heather, Natural SPECIAL
ORDER 9.6 1.6 50 480 1724
Heather
Brindle
eco version available
Natural
Slate
Bracken
Charcoal
Cedar
Golden
ML This product can be hand or machine laid. This product is available to download from our website in BIM Level 2 format.BIM
14
Bloc
k Pa
ving
Tegula Circle & Setts Bracken | Galgorm Resort & Spa, Ballymena
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 15
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
tegula setts & circlestimeless elegance• Tumbled to give an aged, antique appearance • Evokes timeless style and elegance • Vibrant long-lasting colours*• Significantly reduced efflorescence** • Suitable for both modern or period properties• Ideal for creating borders
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Manufacturing process Tumbled to give aged appearanceEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q24 110Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint Tegula Setts
50mm: 60mm: 80mm:
17kgCo2e/m2
22kgCo2e/m2
32kgCo2e/m2
Tegula Circle50mm: 60mm:
19kgCo2e/m2
24kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
50/60mm:A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved when used in conjunction with a prepared recycled sub-base.80mm:B, according to the Green Guide to Specification, 4th Edition 2009. A, can be achieved when used in conjunction with a prepared recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
TEGULA SETTS BIM Various x 50 Bracken, Charcoal, Golden, Heather, Natural YES 8.5 0.85 117 995 930100 x 100 x 50 Bracken, Charcoal, Golden, Heather YES 11.52 0.96 100 1152 1215Various x 60 Bracken, Charcoal, Golden, Heather, Natural YES 6.8 0.85 117 796 872100 x 100 x 60 Bracken, Charcoal, Golden, Heather YES 9.6 0.96 100 960 1241Various x 80 Bracken, Charcoal, Golden, Heather, Natural SPECIAL
ORDER 5.95 0.85 117 696 1082TEGULA CIRCLE (sold as one unit)
50 x 1.5m diameter Bracken, Charcoal, Golden, Heather, Natural YES - 1.76 - 169 20060 x 1.5m diameter Bracken, Charcoal, Golden, Heather, Natural YES - 1.76 - 169 239
Heather
CircleSetts
Bracken
CircleSetts
Golden
CircleSetts
Charcoal
CircleSetts
Natural
CircleSetts
Tegula Circular SystemTegula Circular is a specially designed system for easy creation of circular patterns. Please refer to our website for laying guidelines.
Tegula Setts90mm x VARIOUS
100mm x 100mm
90mm
120mm110mm100mm90mm80mm70mm
100mm
100mm
This product is available to download from our website in BIM Level 2 format.BIM
16
Bloc
k Pa
ving
Fusion Silver, Graphite & Mid Grey | University of Lincoln, Lincolnshire
Other sizes available. See Sienna.
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 17
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
fusionmodular granite paving• Vibrant, granite appearance• Manufactured with sparkling natural granite aggregates• Superb hard-wearing granite surface• Vibrant long-lasting colours*• Significantly reduced efflorescence**• Creates a striking, contemporary look
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003: 100x100x60mm
200x100x60mm200x200x60mm300x200x60mm100x100x80mm200x100x80mm200x200x80mm300x200x80mm300x300x80mm
BS EN 1339:2003: 300x300x60mm600x300x60mm600x300x80mm
Surface Layer Hard wearing surface layer with a minimum of 4mm and >350kgs/m3 cement
Surface Finish Textured Granite AggregateGranite Content in Surface Layer(Not less than %)
80% 53% 45% 20%
Tuscan Red Azure Blue, Cream, Graphite, Jade Green, Mid Grey, Russet, Silver Sandstone Rose
Efflorescence** Minimum 12 hour vapour curing to significantly reduce the possibility of efflorescence
Strength BS EN 1338:2003: > 3.6MPaBS EN 1339:2003: > 3.5MPa
Slip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005: 100x100x60mm
200x100x60mm200x200x60mm300x200x60mm100x100x80mm200x100x80mm200x200x80mm300x200x80mm300x300x80mm
BS 7533-4:2006: 300x300x60mm600x300x60mm600x300x80mm
Q24 110Applications This product is normally suitable for pedestrianised
areas or areas with occasional vehicular traffic overrrun. The latest British and European Standards should be consulted to ensure the correct sub-base design is achieved prior to installation.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 60mm:
80mm: 26kgCo2e/m2
34kgCo2e/m2
Recyced content Not less than 8% of Azure Blue, Graphite, Jade Green, Mid Grey, Russet, Silver
Manufacturing location Produced in the UK with locally sourced materials rating
www.bre.co.uk60mm:A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved when used in conjunction with a prepared recycled sub-base.80mm:B, according to the Green Guide to Specification, 4th Edition 2009. A, can be achieved when used in conjunction with a prepared recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
permeable version available eco version available
Silver
Mid Grey
Graphite
Sandstone
Russet
Cream
Azure Blue
Jade Green
Havana Brown
AmberRose
Tuscan Red
Important Information
Tobermore recommend that you separate product groups using contrasting bands of colour as each product is manufactured separately and may have slight variations in colour.
18
Bloc
k Pa
ving
Fusion Silver | Olympic Way, Wembley Arena, London
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 19
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
fusionmodular granite paving permeable version available eco version available
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
FUSION 60mm BIM 100 x 100 x 60 Graphite, Silver YES 11.52 0.96 100 1152 1630Amber, Azure Blue, Cream,Havanna Brown, Jade Green, Mid Grey, Rose, Russet, Sandstone, Tuscan Red
SPECIAL ORDER
200 x 100 x 60 Graphite, Silver YES 13.44 2.24 50 672 1810Amber, Azure Blue, Cream,Havanna Brown, Jade Green, Mid Grey, Rose, Russet, Sandstone, Tuscan Red
SPECIAL ORDER
200 x 200 x 60 Graphite, Silver YES 12.48 2.08 25 312 1765Amber, Azure Blue, Cream,Havanna Brown, Jade Green, Mid Grey, Rose, Russet, Sandstone, Tuscan Red
SPECIAL ORDER
300 x 200 x 60 Graphite, Silver YES 12.48 3.12 16.66 208 1765Amber, Azure Blue, Cream,Havanna Brown, Jade Green, Mid Grey, Rose, Russet, Sandstone, Tuscan Red
SPECIAL ORDER
300 x 300 x 60 Graphite, Silver YES 9.36 2.34 11.11 104 1325Amber, Azure Blue, Cream,Havanna Brown, Jade Green, Mid Grey, Rose, Russet, Sandstone, Tuscan Red
SPECIAL ORDER
600 x 300 x 60 Graphite, Silver YES 9.36 4.68 5.55 52 1325Amber, Azure Blue, Cream,Havanna Brown, Jade Green, Mid Grey, Rose, Russet, Sandstone, Tuscan Red
SPECIAL ORDER
FUSION 80mm BIM 100 x 100 x 80 Graphite, Silver YES 9.6 0.96 100 960 1756Amber, Azure Blue, Cream,Havanna Brown, Jade Green, Mid Grey, Rose, Russet, Sandstone, Tuscan Red
SPECIAL ORDER
200 x 100 x 80 Graphite, Silver YES 9.6 1.6 50 480 1756Amber, Azure Blue, Cream,Havanna Brown, Jade Green, Mid Grey, Rose, Russet, Sandstone, Tuscan Red
SPECIAL ORDER
200 x 200 x 80 Graphite, Silver YES 9.6 1.6 25 240 1756Amber, Azure Blue, Cream, Graphite, Havanna Brown, Jade Green, Mid Grey, Rose, Russet, Sandstone, Tuscan Red
SPECIAL ORDER
300 x 200 x 80 Graphite, Silver YES 9.6 2.4 16.66 160 1756Amber, Azure Blue, Cream, Graphite, Havanna Brown, Jade Green, Mid Grey, Rose, Russet, Sandstone, Tuscan Red
SPECIAL ORDER
300 x 300 x 80 Graphite, Silver YES 7.2 1.8 11.11 80 1319Amber, Azure Blue, Cream, Graphite, Havanna Brown, Jade Green, Mid Grey, Rose, Russet, Sandstone, Tuscan Red
SPECIAL ORDER
600 x 300 x 80 Graphite, Silver YES 7.2 3.6 5.55 40 1319Amber, Azure Blue, Cream, Graphite, Havanna Brown, Jade Green, Mid Grey, Rose, Russet, Sandstone, Tuscan Red
SPECIAL ORDER
sizes available (Please check product information table for available block depths)
100 x 100mm 200 x 100mm 200 x 200mm
300 x 200mm 300 x 300mm 600 x 300mm
Important Information
Light coloured blocks emphasis tyre marks and oil spills. It must be accepted that these products will need more maintenance if the overall appearance is to be maintained.
Other sizes available. See Sienna.
This product is available to download from our website in BIM Level 2 format.BIM
20
Bloc
k Pa
ving
Sienna Duo Sandstone & Graphite | Sir Chris Hoy Velodrome, Glasgow
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 21
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
siennavibrant granite appearance• Manufactured with sparkling natural granite aggregates• Superb hard-wearing granite surface• Beautiful strong, vibrant colours • Long-lasting colours*• Significantly reduced efflorescence** • Creates a striking, contemporary look
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Surface Layer Hard wearing surface layer with a minimum of 4mm
and >350kgs/m3 cementSurface Finish Textured Granite AggregateGranite Content Not less than 53% of granite aggregate in surface layer
for Silver and Graphite; Not less than 45% of granite aggregate in surface layer for Sandstone.
Efflorescence Minimum 12 hour vapour curing to significantly reduce the possibility of efflorescence
Strength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q24 110Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint* kgCo2e/m2
50mm 60mm 80mmSilver: Sandstone: Graphite:
20*22*22*
24*26*26*
32*34*34*
Recyclable 100% of this product can be recycledRecycled content(not less than %)
50mm 60mm 80mmSilver: Graphite:
10%10%
8%8%
6%6%
Manufacturing location Produced in the UK with locally sourced materials rating
www.bre.co.uk50/60mm:A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved when used in conjunction with a prepared recycled sub-base.80mm:B, according to the Green Guide to Specification, 4th Edition 2009. A, can be achieved when used in conjunction with a prepared recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
permeable version available eco version available
Silver
Sandstone
Graphite
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
SIENNA 50mm 208 x 173 x 50 Graphite, Sandstone, Silver YES 14.04 2.34 27.79 390 1638SIENNA DUO 50mm(both sizes in one pack)
208 x 173 x 50 Graphite, Sandstone, Silver YES 13.86 0.99 30.3 210 1617173 x 173 x 50 210
SIENNA 60mm ML 208 x 173 x 60 Graphite, Sandstone, Silver YES 10.8 1.8 27.79 300 1537160 x 160 x 60 Silver YES 11.65 1.66 39.06 455 1646
Graphite, Sandstone SPECIAL ORDER
240 x 160 x 60 Silver YES 11.52 2.3 26.04 300 1630Graphite, Sandstone SPECIAL
ORDER
SIENNA DUO 60mm BIM(both sizes in one pack)
208 x 173 x 60 Graphite, Sandstone, Silver YES 12.87 0.99 30.3 195 1818173 x 173 x 60 195
SIENNA 80mm 240 x 160 x 80 Silver YES 9.6 1.92 26.04 250 1755Graphite, Sandstone SPECIAL
ORDER
160 x 160 x 80 Silver YES 8.96 1.28 39.06 350 1639Graphite, Sandstone SPECIAL
ORDER
120 x 160 x 80 Graphite, Sandstone, Silver SPECIAL ORDER 9.4 1.34 52.08 490 1719
208 x 173 x 80 Silver YES 10.07 1.44 27.79 280 1841Graphite, Sandstone MADE TO
ORDER
173 x 173 x 80 Graphite, Sandstone, Silver SPECIAL ORDER 10.5 1.5 33.4 350 1900
SIENNA DUO 80mm BIM(both sizes in one pack)
208 x 173 x 80 Graphite, Sandstone, Silver SPECIAL ORDER 9.9 0.99 30.3 150 1812
173 x 173 x 80 150
ML This product can be hand or machine laid.
Sienna Silver
Important Information
Light coloured blocks emphasis tyre marks and oil spills. It must be accepted that these products will need more maintenance if the overall appearance is to be maintained.
Modular sizes available. See Fusion.
This product is available to download from our website in BIM Level 2 format.BIM
22
Bloc
k Pa
ving
Sienna Circle Silver and Sienna Setts Silver & Graphite with Sienna Graphite | Loughshore Hotel, Belfast
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 23
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
sienna setts & circlesvibrant granite appearance• Manufactured with sparkling natural granite aggregates• Superb hard-wearing granite surface• Vibrant long-lasting colours*• Significantly reduced efflorescence**• Creates a striking, contemporary look• Ideal for borders
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Surface Layer Hard wearing surface layer with a minimum of 4mm
and >350kgs/m3 cementSurface Finish Textured Granite AggregateGranite Content Not less than 53% of granite aggregate in surface
layer for Silver and Graphite; Not less than 45% of granite aggregate in surface layer for Sandstone
Efflorescence** Minimum 12 hour vapour curing to significantly reduce the possibility of efflorescence
Strength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q24 110Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint Sienna Setts
50mm: Silver: Sandstone: Graphite:
20kgCo2e/m2
22kgCo2e/m2
22kgCo2e/m2
60mm: Silver: Sandstone: Graphite:
24kgCo2e/m2
26kgCo2e/m2
26kgCo2e/m2
Sienna Circle60mm: Silver:
Sandstone: Graphite:
24kgCo2e/m2
26kgCo2e/m2
26kgCo2e/m2
Recyclable 100% of this product can be recycledRecycled content 50mm: Silver:
Graphite:Not less than 10% Not less than 10%
60mm: Silver: Graphite:
Not less than 8% Not less than 8%
Manufacturing location Produced in the UK with locally sourced materials rating
www.bre.co.ukA, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved when used in conjunction with a prepared recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
SIENNA SETTS 100 x 100 x 50 Graphite, Sandstone, Silver YES 11.52 0.96 100 1152 1345various x 60 Graphite, Sandstone, Silver YES 12.35 0.95 117 1445 1737
SIENNA CIRCLE 60 x 1.5m diameter Graphite, Sandstone, Silver YES - 1.76 (per circle)
- 169 245
Silver
CircleSetts
Graphite
CircleSetts
Sandstone
CircleSetts
Important Information
Light coloured blocks emphasis tyre marks and oil spills. It must be accepted that these products will need more maintenance if the overall appearance is to be maintained.
Sienna Circular SystemSienna Circular is a specially designed system for easy creation of circular patterns. Please refer to our website for laying guidelines.
Sienna Setts90mm x VARIOUS
100mm x 100mm
90mm
120mm110mm100mm90mm80mm70mm
100mm
100mm
24
Bloc
k Pa
ving
Chieftain Silver & Graphite | Example
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 25
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
chieftain vs5large format paving• Shift protection on five sides of the block provides maximum
stability• Vibrant, granite appearance• Manufactured with sparkling natural granite aggregates• Superb hard-wearing granite surface• Vibrant long-lasting colours*• Significantly reduced efflorescence**
• Creates a striking, contemporary look
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1339:2003Surface Layer Hard wearing surface layer with a minimum of 4mm
and >350kgs/m3 cementSurface Finish Textured Granite AggregateGranite Content Not less than 53% of granite aggregate in surface
layer for Silver, Mid Grey, Graphite; Not less than 45% of granite aggregate in surface layer for Sandstone.
Efflorescence** Minimum 12 hour vapour curing to significantly reduce the possibility of efflorescence
Strength > 3.5MPaSlip/Skid resistance Extremely Low (>75 USRV)Spacer Unique VS5 spacer which adds shift protection on five
sides of the blockInstalled to Specific installation instructions for Chieftain are
available from TobermoreQ25 315
Applications 800x400x100mm & 1200x400x120mm: Suitable for predestrianised areas. Technical guidance must be considered for any other application. The latest British Standard should be consulted to ensure the correct sub-base design is achieved prior to installation. Specialised design advice can be obtained by contacting Tobermore directly.800x400x120mm: Suitable for predestrianised areas or areas with occasional vehicular traffic overrun. Technical guidance must be considered for any other application. The latest British Standard should be consulted to ensure the correct sub-base design is achieved prior to installation. Specialised design advice can be obtained by contacting Tobermore directly.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 100mm: Silver:
Mid Grey: Sandstone:Graphite:
40kgCo2e/m2
43kgCo2e/m2
43kgCo2e/m2
43kgCo2e/m2
120mm: Silver:
Mid Grey: Sandstone: Graphite:
48kgCo2e/m2
51kgCo2e/m2
51kgCo2e/m2
51kgCo2e/m2
Recyclable 100% of this product can be recycledRecycled content Not less than 6% recycled materials included (all
colours except Sandstone)Manufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
Refer to the Green Guide to Specification, 4th Edition 2009
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
CHIEFTAIN VS5 800 x 400 x 100 Graphite, Mid Grey, Sandstone, Silver SPECIAL ORDER 5.12 0.64 3.125 16 1156
800 x 400 x 120 Graphite, Mid Grey, Sandstone, Silver SPECIAL ORDER 4.48 0.64 3.125 14 1214
1200 x 400 x 120 Graphite, Mid Grey, Sandstone, Silver SPECIAL ORDER 5.76 0.96 2.08 12 1552
Silver
Sandstone
Graphite
Mid Grey
Important Information
Light coloured blocks emphasis tyre marks and oil spills. It must be accepted that these products will need more maintenance if the overall appearance is to be maintained.
Chieftain VS5 Graphite
BIM
This product is available to download from our website in BIM Level 2 format.BIM
26
Bloc
k Pa
ving
City Pave VS5 Silver, Graphite & Mid Grey | Blanchedowne Road, London Borough of Southwark
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 27
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
city pave vs5heavy duty paving for modern cities• Shift protection on five sides of the block provides maximum
stability• Vibrant, granite appearance• Manufactured with sparkling natural granite aggregates• Superb hard-wearing granite surface• Vibrant long-lasting colours*• Significantly reduced efflorescence**
• Creates a striking, contemporary look
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Surface Layer Hard wearing surface layer with a minimum of 4mm
and >350kgs/m3 cementSurface Finish Standard or Textured Granite AggregateGranite Content Not less than 53% of granite aggregate in surface
layer for Silver, Mid Grey, Graphite; Not less than 45% of granite aggregate in surface layer for Sandstone.
Efflorescence** Minimum 12 hour vapour curing to significantly reduce the possibility of efflorescence
Strength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Spacer Unique VS5 spacer which adds shift protection on five
sides of the blockInstalled to Specific installation instructions for City Pave VS5 are
available from TobermoreQ24 110
Applications Residential and Commercial when used in conjunction with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint Bracken:
Brindle: Charcoal: Heather: Silver: Sandstone: Graphite: Mid Grey:
38kgCo2e/m2
38kgCo2e/m2
38kgCo2e/m2
38kgCo2e/m2
40kgCo2e/m2
43kgCo2e/m2
43kgCo2e/m2
43kgCo2e/m2
Recyclable 100% of this product can be recycledRecycled content Not less than 6% recycled materials included in Silver
and GraphiteManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
Refer to the Green Guide to Specification, 4th Edition 2009
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
Heather
Brindle
Silver
Sandstone
Bracken
Charcoal
Graphite
Profiling on the underside of the stones produces a clawing effect in the pavement bed.
Mid Grey
Important Information
Light coloured blocks emphasis tyre marks and oil spills. It must be accepted that these products will need more maintenance if the overall appearance is to be maintained.
This product is available to download from our website in BIM Level 2 format.BIM
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
CITY PAVE VS5 BIM 300 x 150 x 100 Graphite, Silver YES 7.2 1.8 22.2 160 1565Bracken, Brindle, Charcoal, Heather, Mid Grey, Sandstone SPECIAL
ORDER
28
Bloc
k Pa
ving
Manhattan Silver, Graphite & Sandstone | Kennishead Road, Glasgow
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 29
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
manhattanlinear, plank paving• Vibrant, granite appearance• Manufactured with sparkling natural granite aggregates• Superb hard-wearing granite surface• Vibrant long-lasting colours*• Significantly reduced efflorescence** • Creates a striking, contemporary look
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Surface Layer Hard wearing surface layer with a minimum of 4mm
and >350kgs/m3 cementSurface Finish Textured Granite AggregateGranite Content Not less than 53% of granite aggregate in surface
layer for Silver, Mid Grey and Graphite; Not less than 45% of granite aggregate in surface layer for Sandstone
Efflorescence** Minimum 12 hour vapour curing to significantly reduce the possibility of efflorescence
Strength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q24 110Applications 600x150x80mm & Mixed length x80mm:
Suitable for predestrianised areas. Technical guidance must be considered for any other application. The latest British Standard should be consulted to ensure the correct sub-base design is achieved prior to installation. Specialised design advice can be obtained by contacting Tobermore directly.Mixed length x120mm: Suitable for predestrianised areas or areas with occasional vehicular traffic overrun. Technical guidance must be considered for any other application. The latest British Standard should be consulted to ensure the correct sub-base design is achieved prior to installation. Specialised design advice can be obtained by contacting Tobermore directly.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 80mm: Silver:
Mid Grey: Sandstone: Graphite:
32kgCo2e/m2
34kgCo2e/m2
34kgCo2e/m2
34kgCo2e/m2
120mm: Silver: Mid Grey: Sandstone: Graphite:
48kgCo2e/m2
51kgCo2e/m2
51kgCo2e/m2
51kgCo2e/m2
Recyclable 100% of this product can be recycledRecycled content Not less than 6% recycled materials included in Silver,
Mid Grey and GraphiteManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
Refer to the Green Guide to Specification, 4th Edition 2009
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
MANHATTAN BIM 600 x 150 x 80 Graphite, Mid Grey, Sandstone, Silver SPECIAL ORDER 9 4.5 11.11 100 1646
mixed length x 80 Graphite, Sandstone, Silver YES 9.6 0.96 20.7 200 1765Mid Grey SPECIAL
ORDER
mixed length x 120 Graphite, Mid Grey, Sandstone, Silver SPECIAL ORDER 6.72 0.96 20.7 140 1852
Silver
Sandstone
Graphite
Mid Grey
Manhattan mixed length (Example laying pattern)
size (mm)MANHATTAN 80mm [mixed length](all sizes in one pack)
250 x 122 x 80300 x 122 x 80300 x 164 x 80400 x 122 x 80400 x 164 x 80500 x 122 x 80500 x 164 x 80
MANHATTAN 120mm [mixed length](all sizes in one pack)
250 x 122 x 120300 x 122 x 120300 x 164 x 120400 x 122 x 120400 x 164 x 120500 x 122 x 120500 x 164 x 120
This product is available to download from our website in BIM Level 2 format.BIM
30
Bloc
k Pa
ving
Lincoln Bracken and Buff Textured | Solihull Gateway
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 31
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
lincolnmodular paving with a smooth surface • Vibrant long-lasting colours*• Superb hard-wearing smooth surface• Significantly reduced efflorescence** • Pencil chamfer significantly reduces maintenance• Smooth surface is ideal for wheeled traffic
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003: 100x100x60
200x100x60 200x200x60300x200x60
100x100x80 200x100x80 200x200x80300x200x80
BS EN 1339:2003: 300x300x60600x300x60
300x300x80600x300x80
Surface Layer Hard wearing surface layer with a minimum of 4mm and >350kgs/m3 cement
Chamfer Pencil ChamferEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005: 100x100x60
200x100x60 200x200x60300x200x60
100x100x80 200x100x80 200x200x80300x200x80
BS 7533-4:2006: 300x300x60600x300x60
300x300x80600x300x80
Q24 110Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 60mm:
80mm: 22kgCo2e/m2
30kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
60mm: A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved when used in conjunction with a prepared recycled sub-base.80mm: B, according to the Green Guide to Specification, 4th Edition 2009. A, can be achieved when used in conjunction with a prepared recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
Heather
Brindle
Natural
Bracken
Charcoal
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
LINCOLN 60mm 100 x 100 x 60 Bracken, Brindle, Charcoal, Heather, Natural SPECIAL ORDER 11.52 0.96 100 1152 1630
200 x 100 x 60 Bracken, Brindle, Charcoal, Heather, Natural SPECIAL ORDER 13.44 2.24 50 672 1810
200 x 200 x 60 Bracken, Brindle, Charcoal, Heather, Natural SPECIAL ORDER 12.48 2.08 25 312 1765
300 x 200 x 60 Bracken, Brindle, Charcoal, Heather, Natural SPECIAL ORDER 12.48 3.12 16.66 208 1765
300 x 300 x 60 Bracken, Brindle, Charcoal, Heather, Natural SPECIAL ORDER 9.36 2.34 11.11 104 1325
600 x 300 x 60 Bracken, Brindle, Charcoal, Heather, Natural SPECIAL ORDER 9.36 4.68 5.55 52 1325
LINCOLN 80mm BIM 100 x 100 x 80 Bracken, Brindle, Charcoal, Heather, Natural SPECIAL ORDER 9.6 0.96 100 960 1756
200 x 100 x 80 Bracken, Brindle, Charcoal, Heather, Natural SPECIAL ORDER 9.6 1.6 50 480 1756
200 x 200 x 80 Bracken, Brindle, Charcoal, Heather, Natural SPECIAL ORDER 9.6 1.6 25 240 1756
300 x 200 x 80 Bracken, Brindle, Charcoal, Heather, Natural SPECIAL ORDER 9.6 2.4 16.66 160 1756
300 x 300 x 80 Bracken, Brindle, Charcoal, Heather, Natural SPECIAL ORDER 7.2 1.8 11.11 80 1319
600 x 300 x 80 Bracken, Brindle, Charcoal, Heather, Natural SPECIAL ORDER 7.2 3.6 5.55 40 1319
Lincoln Natural
Other sizes available. See Shannon.
This product is available to download from our website in BIM Level 2 format.BIM
32
Bloc
k Pa
ving
Shannon Bracken | Market Street, Limavady
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 33
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
shannondelightful smooth paving• Vibrant long-lasting colours*• Superb hard-wearing smooth surface• Significantly reduced efflorescence**• Pencil chamfer significantly reduces maintenance• Smooth surface is ideal for wheeled traffic
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Surface Layer Hard wearing surface layer with a minimum of 4mm
and >350kgs/m3 cementChamfer Pencil ChamferEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q24 110Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 50mm:
60mm: 80mm:
18kgCo2e/m2
22kgCo2e/m2
30kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
50/60mm:A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved when used in conjunction with a prepared recycled sub-base.80mm:B, according to the Green Guide to Specification, 4th Edition 2009. A, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
permeable version available
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
SHANNON 50mm 208 x 173 x 50 Bracken, Brindle, Charcoal, Heather, Natural YES 14.04 2.34 27.79 390 1638SHANNON 50mm [void pack] 208 x 173 x 50 Bracken, Brindle, Charcoal, Heather, Natural YES 13.32 1.08 27.79 370 1545SHANNON DUO 50mm (both sizes in one pack)
208 x 173 x 50 Bracken, Charcoal, Heather YES 13.86 0.99 30.3 210 1617173 x 173 x 50 210
SHANNON 60mm 208 x 173 x 60 Bracken, Brindle, Charcoal, Heather, Natural YES 12.96 2.16 27.79 360 1792SHANNON DUO 60mm BIM(both sizes in one pack)
208 x 173 x 60 Bracken, Charcoal, Heather YES 12.87 0.99 30.3 195 1815173 x 173 x 60 195
SHANNON 80mm 208 x 173 x 80 Bracken, Brindle, Charcoal, Heather, Natural SPECIAL ORDER 10.07 1.44 27.79 280 1843
SHANNON DUO 80mm BIM(both sizes in one pack)
208 x 173 x 80 Bracken, Brindle, Charcoal, Heather, Natural SPECIAL ORDER 9.9 0.99 30.3 150 1812
173 x 173 x 80 150
eco version available
Heather
Brindle
Natural
Bracken
Charcoal
Shannon Heather
Modular sizes available. See Lincoln.
This product is available to download from our website in BIM Level 2 format.BIM
34
Bloc
k Pa
ving
Toberloc Charcoal & Natural | Retail Distribution Centre, Dublin
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 35
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
toberlocheavy duty paving for the toughest environments• Interlocking shape helps stability under heavy loads • Maximum resistance to rutting and lateral forces • Performs significantly better than 200x100mm paving • Easy to lay with machines, thus reducing costs• Superb hard-wearing smooth surface
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Surface Layer Hard wearing surface layer with a minimum of 4mm
and >350kgs/m3 cementEfflorescence Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q24 110Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 32kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
B, according to the Green Guide to Specification, 4th Edition 2009. A, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
product size (mm) chamfer colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
TOBERLOC ML 225 x 80 Fine or Deep Brindle, Charcoal, Natural SPECIAL ORDER 8.9 0.89 26.33 234 1572
This product can be hand or machine laid. ML
Charcoal
Brindle
Natural
Toberloc Brindle, Charcoal & Natural
Product Profile
225
80
36
Bloc
k Pa
ving
Mammut Red, Natural & Charcoal | Supermarket, Dublin
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 37
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
mammutspecialised interlocking system• Interlocking shape helps stability under heavy loads • Maximum resistance to rutting and lateral forces • Performs significantly better than 200x100mm paving • Easy to lay with machines, thus reducing costs• Superb hard-wearing smooth surface• Beautiful strong, vibrant colours • Long-lasting colours*
• Significantly reduced efflorescence** • Pencil chamfer significantly reduces maintenance• Smooth surface is ideal for wheeled traffic
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Surface Layer Hard wearing surface layer with a minimum of 4mm
and >350kgs/m3 cementSurface Finish StandardEfflorescence Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q24 110Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 32kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
B, according to the Green Guide to Specification, 4th Edition 2009. A, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
This product can be hand or machine laid. ML
Natural
Charcoal
Red
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
MAMMUT ML 210 x 210 x 80 Charcoal, Natural, Red SPECIAL ORDER 10.38 1.038 22.67 235 1844
Mammut Natural
Product Profile
210
210
80
38
Bloc
k Pa
ving
Pedesta Brindle | Antrim Bus & Rail Station
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 39
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
pedestabeautiful vibrant colours• Superb hard-wearing smooth surface• Vibrant long-lasting colours*• Significantly reduced efflorescence** • Rectangular profile allows the creation of distinctive patterns• Creates a stunning, smooth look• Pencil Edge Pedesta also available
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Surface Layer Hard wearing surface layer with a minimum of 4mm
and >350kgs/m3 cementChamfer Standard or Pencil Edge ChamferEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q24 110Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 50mm:
60mm: 80mm:
18kgCo2e/m2
22kgCo2e/m2
30kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
50/60mm:A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved by using a recycled sub-base.80mm: B, in according to the Green Guide to Specification, 4th Edition 2009. A, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
permeable version available
This product can be hand or machine laid. ML
eco version available
Heather
Brindle
Golden
Bracken
Charcoal
Red
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
PEDESTA 50mm 200 x 100 x 50 Bracken, Brindle, Charcoal, Heather YES 14.4 2.4 50 720 1626PEDESTA 50mm [void pack] 200 x 100 x 50 Bracken, Brindle, Charcoal, Golden, Heather, Red YES 13.76 0.96 50 688 1545PEDESTA 60mm BIM 200 x 100 x 60 Bracken, Brindle, Charcoal, Heather YES 13.44 2.24 50 672 1810PEDESTA 60mm (pencil edge)
200 x 100 x 60 Bracken, Brindle, Charcoal, Heather SPECIAL ORDER 13.44 2.24 50 672 1810
PEDESTA 80mm BIM 200 x 100 x 80 Bracken, Brindle, Charcoal, Heather YES 9.6 1.6 50 480 1724PEDESTA 80mm (pencil edge)
200 x 100 x 80 Bracken, Brindle, Charcoal, Heather SPECIAL ORDER 9.6 1.6 50 480 1724
PEDESTA 80mm ML 200 x 100 x 80 Bracken, Brindle, Charcoal, Heather SPECIAL ORDER 8.8 0.88 50 440 1608
Pedesta Heather
This product is available to download from our website in BIM Level 2 format.BIM
40
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
pemburyattractive, textured finish• Superb hard-wearing textured surface• Vibrant long-lasting colours*• Significantly reduced efflorescence** • Rectangular profile allows the creation of distinctive patterns• Creates a stunning, textured look
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Surface Layer Hard wearing surface layer with a minimum of 4mm
and >350kgs/m3 cementSurface Finish Textured AggregateEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q24 110Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 60mm:
80mm:22kgCo2e/m2
30kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
60mm:A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved when used in conjunction with a prepared recycled sub-base.80mm:B, according to the Green Guide to Specification, 4th Edition 2009. A, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
PEMBURY BIM 200 x 100 x 60 Bracken, Brindle, Charcoal, Heather SPECIAL ORDER 13.44 2.24 50 672 1810
200 x 100 x 80 Bracken, Brindle, Charcoal, Heather SPECIAL ORDER 9.6 1.6 50 480 1724
Heather
Brindle
Bracken
Charcoal
Pembury Charcoal
This product is available to download from our website in BIM Level 2 format.BIM
Pembury - textured surface
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 41
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
squaresettversatile cost-effective paving• Superb hard-wearing smooth surface • Vibrant long-lasting colours*• Significantly reduced efflorescence**• Creates a stunning, rectangular appearance
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Surface Layer Hard wearing surface layer with a minimum of 4mm
and >350kgs/m3 cementEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q24 110Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 30kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
B, according to the Green Guide to Specification, 4th Edition 2009. A, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
SQUARESETT 200 x 100 x 80 Bracken, Brindle, Charcoal, Heather, Natural, Red SPECIAL ORDER 9.6 1.6 50 480 1724
Heather
Brindle
Natural
Bracken
Charcoal
Red
Squaresett Brindle
42
Bloc
k Pa
ving
Retro Heather | Innova Park, Enfield, London
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 43
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
retroeuropean cobbled look• Tumbled to give an aged, antique appearance • Evokes timeless style and elegance • Vibrant long-lasting colours*• Significantly reduced efflorescence**• Suitable for both modern or period properties• Creates a vintage, cobbled look
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Manufacturing process Tumbled to give aged appearanceEfflorescence** Minimum 12 hour vapour curing to significantly
reduce the possibility of efflorescenceStrength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q24 110Applications This product is suitable for pedestrianised areas.
Technical guidance should be considered for any other application. The latest British Standard should be consulted to ensure the corrrect sub-base design is achieved prior to installation.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 22kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
product packed in size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
RETRO Bags 190 x 50 x 60 Bracken, Heather YES 6.5 2 or 4 105.3 684 820
Heather Bracken
Retro Bracken and Sienna Setts Silver
44
Bloc
k Pa
ving
Roma Bracken | Seaview Hall, Glenarm
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 45
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
romatraditional courtyard paving• Tumbled to give an aged, antique appearance • Evokes timeless style and elegance • Vibrant long-lasting colours*• Significantly reduced efflorescence**• Suitable for both modern or period properties• Creates an ancient, courtyard look
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Manufacturing process Tumbled to give an aged appearanceEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q24 110Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 24kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
ROMA (all sizes in one pack)
240 x 180 x 60 Bracken, Heather, Slate YES 12.1 1.01 39.6 480 1698120 x 180 x 60120 x 120 x 60
Heather
Slate
Bracken
Roma Slate
46
Bloc
k Pa
ving
Turfstone Natural | Talbot Lodge, Dublin
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 47
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
turfstoneground reinforcement grass paving system• Honey-combed cavities are designed to facilitate the growth
of grass• Functions as a SUDS permeable pavement• A low-cost solution
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Surface Finish StandardEfflorescence Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.5MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q25 345Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 24kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
Refer to the Green Guide to Specification, 4th Edition 2009.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
TURFSTONE 600 x 400 x 100 Natural YES 7.68 3.84 4.17 32 1070
Natural
Typical uses include:
• Off-street residential parking • Vehicular access for occasional usage i.e. fire lanes, utility access• Overspill commercial or retail parking• Occasional parking for cricket clubs, schools, churches,
caravan parks, cemetries etc.• Nature reserves, sensitive heritage sites and country parks• Environmental erosion control areas such as riverbanks
and waterways• Road verges• Field entrances and farm tracks• SUDS schemes
For installation guidelines refer to our website or contact the Tobermore Sales Office.
Turfstone Natural
48
Bloc
k Pa
ving
Sienna Silver | Bishop Wilson Primary School, Birmingham
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us 49
Bloc
k Pa
ving
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
technical informationblock pavingImportant Information
Any technical information provided by Tobermore in relation to any product (whether before or after order) is provided by way of GUIDANCE ONLY and, to the fullest extent permitted by law, without liability on the part of Tobermore for any loss or damage suffered as a result of relying upon it. Such technical information should not be relied upon in substitution for obtaining independent expert advice prior to using any product from both a suitably qualified engineer and building contractor, in particular, as to the suitability of the product for use at the intended site for the intended scheme.
Block paving is now an established product in the construction industry and has a number of British Standards (BS) dedicated to the range to ensure it is professionally installed. Refer to the following relevant BS guidelines for detailed information.
Note: BS guidelines are subject to change and therefore you should refer to www.bsigroup.com for the latest version.
Other important references include - British Port Association heavy duty pavement design manual: “The structural design of heavy duty pavements for ports and other industries”.
Important notesEdge restraintIt is essential that the paved area is restrained at the edges to prevent movement. The edge restraints prevent rotation of the blocks under load, reducing the possible loss of laying course material at boundaries and resists lateral movement.
Laying courseIf grit is used as the laying course, then fine sand must not be used for jointing as the fine sand can percolate into the bedding layer causing pavement failure.
Jointing sandBlock paving is capable of supporting substantial loads because the presence of sand in the joints generates significant friction between adjacent blocks and thereby distributes loads horizontally across the surface of the pavement from block to block. For this reason blocks should not be mortar jointed. Jointing sand is available from Tobermore. Sand is purchased separately from paving. Very fine jointing sand is not suitable for heavily trafficked areas. Refer to BS7533-3 for all jointing sand specifications. (It’s worth pointing out that the vast majority of contractors apply the jointing sand before consolidation. This is found to give better results and does not conflict with BS 7533:3).
Recess manhole coversTobermore can supply manhole surrounds suitable for domestic applications only.
Tegula and Sienna Circles laying instructionsThe following information is provided as guidance from Tobermore on how to lay your Tegula and Sienna Circles.
The basic circle pattern guide
Note: After row 7, the Paving Circle diameter is increased using Tegula Setts and Sienna Setts.
We provide you with the optimum number of bricks to create a circle, size 1.5m diameter. To achieve the best possible circle it is recommended that you follow this pattern precisely. It should be noted, however, that in outer rows of the circle you may need to provide spaces between the blocks. For further assistance contact Tobermore.
Instructions and warningsRefer to page 130.
BS 7533-1:2001 Pavements constructed with clay, natural stone or concrete pavers. Guide for the structural design of heavy duty pavements constructed of clay or concrete pavers.
BS 7533-2:2001 Pavements constructed with clay, natural stone or concrete pavers. Guide for the structural design of lightly trafficked pavements contructed of clay pavers or precast concrete paving blocks.
BS 7533-3:2005+A1:2009
Pavements constructed with clay, natural stone or concrete pavers. Code of practice for laying precast concrete paving blocks and clay pavers for flexible pavements.
BS 7533-11:2003 Pavements constructed with clay, natural stone or concrete pavers. Code of practice for the opening, maintenance and reinstatement of pavements of concrete, clay and natural stone.
BS 7533-13:2009 Pavements constructed with clay, natural stone or concrete pavers. Guide for the design of permeable pavements constructed with concrete paving blocks and flags, natural stone slabs and setts and clay pavers.
Pointed block
Small rectangular
Tapered block
Circle centre
row no. of blocks type
1 1 Circle centre2 8 Pointed33
88
PointedSmall rectangular
4 24 Tapered55
248
TaperedSmall rectangular
66
2416
TaperedSmall rectangular
77
2424
TaperedSmall rectangular
Vibrant long-lasting colours*Tobermore only use high quality Iron Oxide pigments, (which are made to BS EN 12878), to produce our strong, vibrant and deep colours. Our state-of-the-art equipment makes our products extremely dense thus ensuring that our colours remain intact for very long periods. For example when we examine products which are 10 years old we can see that the colour retention is excellent. Tobermore would recommend that to maintain the colour and quality of product a regular maintenance programme is carried out on all projects.
50
Hyd
ropa
ve P
erm
eabl
e Pa
ving
Hydropave Tegula Duo Bracken | Campbell College Junior School, Belfast
hydropave permeable paving Tobermore offer an extensive variety of Hydropave Permeable Paving products. With all the versatility and aesthetic qualities of our standard and most popular paving products, the Hydropave range allows the creation of spectacular hard landscaping features with environmentally friendly products that reduce the risk of flooding and pollution.
the benefits of permeable paving 53
product range
hydropave tegula 54
hydropave fusion 55
hydropave sienna 56
hydropave shannon 57
hydropave pedesta 58
hydropave 240 59
technical information 60
catalogue of designs 62
world class
51
Hyd
ropa
ve P
erm
eabl
e Pa
ving
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
52
Hyd
ropa
ve P
erm
eabl
e Pa
ving
Hydropave 240 Bracken and Natural | Grace Academy, Darlaston
permeablepaving
the benefits of
The solution to flooding problems is the use of more sustainable methods of storm water drainage which take into account quantity, quality and social issues. These are now referred to as SUDS (Sustainable Urban Drainage Systems).
SUDS are made up of a number of structures, which include:
• Permeable pavements• Swales and filter strips• Basins and wetlands• Infiltration devices
They are more sustainable because they:
• deal with runoff close to where it falls;• manage potential flooding at its source;• protect or enhance water quality;• provide a habitat for wildlife in urban areas;• protect water resources from accidental spills and pollution;• allow new development in areas where existing sewerage systems are at full capacity, enabling new development within existing areas;• are sympathetic to the environmental setting and the needs of the local community;• encourage natural groundwater recharge.
The inclusion of a permeable paving surface as part of a SUDS solution will not only increase the likelihood of planning proposals being approved but may also offer the developer a 10-15% cost savings over traditional methods due to a significant reduction in drainage costs (pipes, manholes, petrol interceptors etc). Machine laying the paving blocks also reduces costs.
Water quality improvement Permeable paving is very effective at removing pollution from runoff. The pollutants may remain on the surface or may be flushed into the underlying pavement layers where a very high percentage of the pollutants are filtered, trapped or degrade over time. Expensive petrol interceptors, which are used in traditional drainage schemes, are generally no longer required due to the natural removal of pollutants through the permeable paving sub-base. For more detailed information on water quality please refer to the Guide to the design, construction and maintenance of concrete block permeable pavements - Edition 6 produced by Interpave available for download on www.paving.org.uk
Four elements of permeable pavingThere are four elements which make up permeable paving:
1 Permeability2 Detention of storm water3 Pollution control4 Structure
Permeability The Hydropave range of products have permeability rates in excess of 1800 litres/sec/hectare, providing a significant safety factor on the required permeability rates of 180 litres/sec/hectare.
Detention The sub-base thickness should be designed to detain rain falling throughout 24 hours and must provide at least 30% void space. A 4/20mm coarse open graded crushed rock to BS EN13242:2002, value of 100kN or more must be used. If the designer opts to specify alternative materials, a site trial must be undertaken to ensure that the laying course material does not invade the sub-base material.
The laying course and jointing material must be a 6.3-2mm grit to BS EN13242:2002. This has been proven in tests to perform best and will not invade the sub-base material. In ground conditions where water cannot infiltrate into the subgrade, an impermeable membrane must be laid between the subgrade and sub-base and wrapped up the sides to detain the water.
Pollution As water flows slowly into the sub-base it collides with individual aggregate components and deposits pollutants on their surface. The large surface area of the aggregates will ensure effective filtering of the pollutants which are then broken down by natural microbial action or eventually rest at the bottom.
Structure The specification of a permeable paving structure depends upon the hydraulic and traffic loading characteristics and upon the properties of the subgrade. Most pavements in the UK will be required to have a water detention capability rather than infiltration because of the subgrade types. It is recommended to design a permeable paving system to store rainfall occurring during 24 hours.
53
Hyd
ropa
ve P
erm
eabl
e Pa
ving
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
ISO 9001:2008 ISO 14001:2004
54
Hyd
ropa
ve P
erm
eabl
e Pa
ving
• Functions as a SUDS paving system• Tumbled to give an aged, antique appearance • Evokes timeless style and elegance • Vibrant long-lasting colours*• Significantly reduced efflorescence** • Suitable for both modern or period properties
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Surface Layer Hard wearing surface layer with a minimum layer of
4mm and >350kgs/m3 cementFrost Protection YesEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceDrainage Void Width 60mm:
5% to accommodate correct grit grading, reduced maintenance and maximise drainage flow rate80mm:6% to accommodate correct grit grading, reduced maintenance and maximise drainage flow rate
Permeability 60mm:80mm:
29,000 litres/sec/hectare35,000 litres/sec/hectare
Strength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q24 115Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 60mm:
80mm:24kgCo2e/m2
34kgCo2e/m2
Recyclable 100% of this product can be recycledDesign Life 25 years - The correct design and aggregates must
be used in accordance with the relevant British Standard or any design guidance provided.
Manufacturing location Produced in the UK with locally sourced materials rating
www.bre.co.uk60mm:A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved by using a recycled sub-base. 80mm:B, according to the Green Guide to Specification, 4th Edition 2009. A, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
hydropave tegulatimeless elegance
Heather Bracken
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
HYDROPAVE TEGULA 200 200 x 100 x 80 Bracken, Charcoal, Heather SPECIAL ORDER 9.6 1.6 50 480 1732
HYDROPAVE TEGULA 240 BIM 240 x 120 x 80 Bracken, Charcoal, Heather, Slate SPECIAL ORDER 10.08 2.02 34.72 350 1781
HYDROPAVE TEGULA DUO BIM(both sizes in one pack)
208 x 173 x 60 Bracken, Cedar, Charcoal, Heather, Natural, Slate YES 12.87 0.99 30 195 1721173 x 173 x 60 195
Natural Slate
CharcoalCedar
The swatches below are for colour reference only. The actual block profile for Hydropave Tegula Duo will be as per swatches above.
Hydropave Tegula Duo Bracken
This product is available to download from our website in BIM Level 2 format.BIM See instructions and warnings on page 130
55
Hyd
ropa
ve P
erm
eabl
e Pa
ving
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
• Functions as a SUDS paving system• Vibrant, granite appearance• Manufactured with sparkling natural granite aggregates• Superb hard-wearing granite surface• Vibrant long-lasting colours*• Significantly reduced efflorescence**• Creates a striking, contemporary look
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Surface Layer Hard wearing surface layer with a minimum layer of
4mm and >350kgs/m3 cementGranite Content in Surface Layer
Not less than 53% of granite aggregate in surface layer for Silver, Graphite and Mid Grey; not less than 45% of granite aggregate in surface layer for Sandstone.
Frost Protection YesEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceDrainage Void Width 5.5% to accommodate correct grit grading, reduced
maintenance and maximise drainage flow ratePermeability 32,000 litres/sec/hectareStrength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q24 115Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 34kgCo2e/m2
Recyclable 100% of this product can be recycledRecycled Content Not less than 8% (Azure Blue, Graphite, Jade Green,
Mid Grey, Russet, Silver)Design Life 25 years - The correct design and aggregates must
be used in accordance with the relevant British Standard or any design guidance provided.
Manufacturing location Produced in the UK with locally sourced materials rating
www.bre.co.ukB, according to the Green Guide to Specification, 4th Edition 2009. A, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
hydropave fusionmodular granite paving
colours
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
HYDROPAVE FUSION 200 x 100 x 80 Graphite, Mid Grey, Sandstone, Silver SPECIAL ORDER 9.6 1.6 50 480 1739
Silver
Mid Grey Graphite
Sandstone
eco version available
Hydropave Fusion Sandstone & Silver
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
ISO 9001:2008 ISO 14001:2004
56
Hyd
ropa
ve P
erm
eabl
e Pa
ving
• Functions as a SUDS paving system• Manufactured with sparkling natural granite aggregates• Superb hard-wearing granite surface• Vibrant long-lasting colours*• Significantly reduced efflorescence** • Creates a striking, contemporary look
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Surface Layer Hard wearing surface layer with a minimum layer of
4mm and >350kgs/m3 cementGranite Content Not less than 53% of granite aggregate in surface
layer for Silver and Graphite; not less than 45% of granite aggregate in surface layer for Sandstone.
Frost Protection YesEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceDrainage Void Width 5% to accommodate correct grit grading, reduced
maintenance and maximise drainage flow ratePermeability 29,000 litres/sec/hectareStrength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q24 115Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint Silver:
Sandstone: Graphite:
24kgCo2e/m2
26kgCo2e/m2
26kgCo2e/m2
Recyclable 100% of this product can be recycledRecycled Content Not less than 6% recycled materials included (Silver &
Graphite only)Design Life 25 years - The correct design and aggregates must
be used in accordance with the relevant British Standard or any design guidance provided.
Manufacturing location Produced in the UK with locally sourced materials rating
www.bre.co.ukA, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
hydropave siennavibrant granite appearance
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
HYDROPAVE SIENNA DUO BIM(both sizes in one pack)
208 x 173 x 60 Graphite, Sandstone, Silver SPECIAL ORDER 12.87 0.99 30 195 1800
173 x 173 x 60 195
coloursSilver
Sandstone Graphite
Important Information
Light coloured blocks emphasis tyre marks and oil spills. It must be accepted that these products will need more maintenance if the overall appearance is to be maintained.
The swatches below are for colour reference only. The actual block profile will be as per swatch above.
Hydropave Sienna Duo Silver
This product is available to download from our website in BIM Level 2 format.BIM See instructions and warnings on page 130
57
Hyd
ropa
ve P
erm
eabl
e Pa
ving
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
• Functions as a SUDS paving system• Superb hard-wearing smooth surface• Vibrant long-lasting colours*• Significantly reduced efflorescence**
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Surface Layer Hard wearing surface layer with a minimum layer of
4mm and >350kgs/m3 cementFrost Protection YesEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceDrainage Void Width 5% to accommodate correct grit grading, reduced
maintenance and maximise drainage flow ratePermeability 29,000 litres/sec/hectareStrength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q24 115Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 22kgCo2e/m2
Recyclable 100% of this product can be recycledDesign Life 25 years - The correct design and aggregates must
be used in accordance with the relevant British Standard or any design guidance provided.
Manufacturing location Produced in the UK with locally sourced materials rating
www.bre.co.ukA, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
hydropave shannondelightful smooth finish
Brindle Bracken
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
HYDROPAVE SHANNON DUO BIM(both sizes in one pack)
208 x 173 x 60 Bracken, Brindle, Charcoal, Heather, Natural SPECIAL ORDER 12.87 0.99 30 195 1764
173 x 173 x 60 195
Natural
CharcoalHeather
The swatches below are for colour reference only. The actual block profile will be as per swatches above.
Hydropave Shannon Duo Bracken
This product is available to download from our website in BIM Level 2 format.BIM
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
ISO 9001:2008 ISO 14001:2004
58
Hyd
ropa
ve P
erm
eabl
e Pa
ving hydropave pedesta
beautiful vibrant colours• Functions as a SUDS paving system• Superb hard-wearing smooth surface• Vibrant long-lasting colours*• Significantly reduced efflorescence**
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Surface Layer Hard wearing surface layer with a minimum layer of
4mm and >350kgs/m3 cementFrost Protection YesEfflorescence** Minimum 12 hour vapour curing to significantly
reduce the possibility of efflorescenceDrainage Void Width 5.5% to accommodate correct grit grading, reduced
maintenance and maximise drainage flow ratePermeability 32,000 litres/sec/hectareStrength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q24 115Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 60mm:
80mm: 22kgCo2e/m2
34kgCo2e/m2
Recyclable 100% of this product can be recycledDesign Life 25 years - The correct design and aggregates must
be used in accordance with the relevant British Standard or any design guidance provided.
Manufacturing location Produced in the UK with locally sourced materials rating
www.bre.co.uk60mm:A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved by using a recycled sub-base. 80mm:B, according to the Green Guide to Specification, 4th Edition 2009. A, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
Heather
Brindle
Natural
Bracken
Charcoal
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
HYDROPAVE PEDESTA BIM 200 x 100 x 60 Bracken, Brindle, Charcoal, Heather YES 13.44 2.24 50 672 1808Natural SPECIAL
ORDER
200 x 100 x 80 Bracken, Brindle, Charcoal, Heather YES 9.6 1.6 50 480 1732Natural SPECIAL
ORDER
HYDROPAVE PEDESTA ML BIM 200 x 100 x 80 Bracken, Brindle, Charcoal, Heather, Natural SPECIAL ORDER 8.8 0.88 50 440 1566
Hydropave Pedesta Brindle & Natural
ML This product can be hand or machine laid. This product is available to download from our website in BIM Level 2 format.BIM See instructions and warnings on page 130
59
Hyd
ropa
ve P
erm
eabl
e Pa
ving
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
hydropave 240large block size• Functions as a SUDS paving system• Superb hard-wearing smooth surface• Vibrant long-lasting colours*• Significantly reduced efflorescence**
product specifications coloursProduct type Concrete Paving BlockManufactured to BS EN 1338:2003Surface Layer Hard wearing surface layer with a minimum layer of
4mm and >350kgs/m3 cementFrost Protection YesEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceDrainage Void Width 6% to accommodate correct grit grading, reduced
maintenance and maximise drainage flow ratePermeability 35,000 litres/sec/hectareStrength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-3:2005
Q24 115Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 34kgCo2e/m2
Recyclable 100% of this product can be recycledDesign Life 25 years - The correct design and aggregates must
be used in accordance with the relevant British Standard or any design guidance provided.
Manufacturing location Produced in the UK with locally sourced materials rating
www.bre.co.ukB, according to the Green Guide to Specification, 4th Edition 2009. A, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
eco version available
Heather
Brindle
Natural
Bracken
Charcoal
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
HYDROPAVE 240 BIM 240 x 120 x 80 Bracken, Brindle, Charcoal, Heather YES 10.08 2.02 34.72 350 1810Natural SPECIAL
ORDERHYDROPAVE 240 ML 240 x 120 x 80 Bracken, Brindle, Charcoal, Heather, Natural SPECIAL
ORDER 9.5 0.95 34.72 330 1647
Hydropave 240 Charcoal & Natural
ML This product can be hand or machine laid. This product is available to download from our website in BIM Level 2 format.BIM
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
60
Hyd
ropa
ve P
erm
eabl
e Pa
ving
Paving blocks & jointing grit
Tobermore have a wide range of Hydropave blocks available and they have a permeability of 1800 litres/sec/hectare which more than meets the 180 litres/sec/hectare requirement. The blocks are jointed using a 6.3-2mm grit to BS EN 7533-13:2009*
Bedding layer The blocks are jointed using a 6.3-2mm grit to BS EN 7533-13:2009*
Sub-base A clean 4/20mm coarse graded aggregate** to BS EN 13242:2002 must be used for this component. A crushed rock angular stone works best.
technical informationhydropave permeable pavingImportant Information
Any technical information provided by Tobermore in relation to any product (whether before or after order) is provided by way of GUIDANCE ONLY and, to the fullest extent permitted by law, without liability on the part of Tobermore for any loss or damage suffered as a result of relying upon it. Such technical information should not be relied upon in substitution for obtaining independent expert advice prior to using any product from both a suitably qualified engineer and building contractor, in particular, as to the suitability of the product for use at the intended site for the intended scheme.
What types of systems are available?There are two common types of permeable paving systems; Attenuation and Infiltration.
TYPICAL ATTENUATION SYSTEM
The Attenuation system temporarily stores the water in the crushed stone beneath the paving before being slowly released back into the drainage systems. This therefore reduces the peak downstream flow from a result of heavy rainfall.
TYPICAL INFILTRATION SYSTEM
The Infiltration system allows the water to flow slowly through the crushed stone beneath the paving before being slowly released back into the ground through a geotextile.
What system should I use?Tobermore can introduce you to specialist engineers, who can provide design advice for your permeable paving project.
What are the key components of a permeable paving system?The key components of the system are:
• Paving blocks & jointing grit• Bedding layer• Sub-base
As long as the system has been adequately designed for the site the most important next step is to get these components right.
designHow do I design a permeable paving system? Refer to the following source of information:
• BS7533-13:2009 Pavements constructed with clay, natural stone or concrete pavers. Guide for the structural design of permeable pavements.
If you require specialist advice Tobermore can put you in contact with experienced design consultants.
Upper geotextile An upper geotextile may be used between the sub-base and the bedding layer. Please refer to BS7533-13:2009 for further information.
What if the ground is poor or there will be significant vehicles on the paving? Various improvement layers can be installed below the permeable paving to ensure the system can meet the structural load on the project. The engineer on the project will design these into it based on the loading category required. The two most common types of improvement layers are Dense Bitumen Macadam (DBM) and Cement Stabilised Coarse Graded Aggregate (CSCGA).
50mm thickness of 6mm grit.80mm thickness Hydropave.
350mm thickness coarsegrade aggregate.
2000 gauge polythene sheet.
110mm PVC-u pipe with perforated End Cap.
Membrane brought up tohaunch kerb and cut off flushwith surface of hydropave.
Typical Attenuation System
Typical Infiltration System
50mm thickness of 6mm grit.80mm thickness Hydropave.
350mm thickness coarsegrade aggregate.
Layer of Lotrak 1800 wovengeotextile or similar approved.
* In particular, the material should be categorised as LA30, Fl20 and MDE20 according to table A.3 within this standard. The grit should be insoluble in dilute hydrochloric acid and should be naturally occurring material.
** You must ensure the grit and coarse graded aggregate are compatible. For example, if you use a finer grit it may perculate into the sub-base and may destabilise the pavement. Please refer to the following source of information – BS7533-13:2009 Pavements constructed with clay, natural stone or concrete pavers. Guide for the structural design of permeable pavements.
hydropa
ve
permeab
le
paving
guidelines for the
design & installation of
Tobermore’s range of
hydropave products
v2.1
TM
hydropavepermeablepaving
guidelines for the
design & installation of
Tobermore’s range of
hydropave products
v2.1
TM
hydropavepermeablepaving
guidelines for the design & installation of Tobermore’s range of hydropave products
v2.1
TM Hydropave Permeable Paving Brochure also available
61
Hyd
ropa
ve P
erm
eabl
e Pa
ving
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
Specifications for Dense Bitumen Macadam and Cement Stabilised Coarse Graded Aggregate can be found in BS 7533-13:2009. Method statements on how to install these layers can be supplied on request.
What is the ratio required of permeable area (Hydropave) to impermeable areas (roads, roofs etc)? Sometimes, water from building roofs or nearby impermeable areas is fed into permeable paving. It is best to do this only in the case of attenuation systems when a typical ratio of 2:1 can be used between impermeable and permeable zones.
Note: A permeable paving design relies heavily on using the correct aggregates. Prior to installation, we would ask you to test both the 4/20mm coarse graded aggregate and also the 6.3-2mm bedding and jointing grit as per the relevant British Standard specification (BS EN 13242:2002). In particular, the material should be categorised as LA20 according to Table 9, SZ18 according to Table 10 and MDE15 according to Table 11 within this standard. The grit should be insoluble in dilute hydrochloric acid and should be naturally occurring material. In our experience, incorrect use of aggregates is one of the most common reasons for failure of a permeable paving system.
installationHow to install a permeable paving system Please refer to the following sources of information - BS 7533-3:2005 Pavements constructed with clay, natural stone or concrete pavers. Part 3: Code of practice for laying precast concrete paving blocks and clay pavers for flexible pavements.
Sub-base: 4/20mm aggregate After putting the required depth of stone in position, it needs to be re-orientated using either a tandem roller or a plate vibrator.
Bedding layer: 6.3-2mm laying course material The bedding layer should be screeded over the 4/20mm.
Paving blocks When the blocks are placed to the chosen pattern they should be plate vibrated, before the 6.3-2mm grit is brushed into the joints until they are completely filled.
Joint filling All joints must be filled to the top with 6.3-2mm grit. Joints,which are not fully filled can lead to possible movement of the blocks after use. We recommend that after a few weeks use that any joints, which have settled and are not full, are topped up with grit. Joints should be kept filled at all times. You will need approximately 1 ton of grit for every 100m2 of 80mm paving.
Note: Care should be taken that the permeable joints do not become contaminated as work on the scheme is completed. Special care needs to be taken when soft landscaping is carried out so that soil does not enter the joints. When this type of work is being carried out, the surface of the permeable paving should be protected by an appropriate cover to protect the joints from being contaminated.
Adverse weather Due to the superior drainage capabilities of Hydropave it is possible to install the product in more adverse weather conditions compared to standard paving.
maintenanceFor optimum performance we recommend that paving is cleaned twice a year.
Initial cleaning When an area has just been paved, allow it to settle for a few weeks. After this, you may wish to lightly hose down the paving to remove any excess dirt. The area should then be treated with a weed killer suppressant, two or three times a year as required. General dirt Regular sweeping to prevent the build up of detritus is recommended. Light coloured blocks, emphasise tyre marks and oil spills on the pavement. It must be accepted that these products will need more maintenance if the overall appearance is to be maintained.A light power hose at medium pressure is generally all that is required to clean general dirt and grime. Any jointing grit which is removed must be replaced. Do not use high pressure power-washers as aggressive power-washing can damage the product surface. A trial area should be tested before large scale power-washing takes place.
Do not use vacuum sweepers as jointing grit may be removed.
Refer to the following sources of information – Guide to the design, construction and maintenance of concrete block permeable pavements Edition 6 produced by Interpave available for download on www.paving.org.uk How to clean clogged joints After several years use, joints may become clogged with detritus and it may be necessary to clean them. This can be done as follows:
1. Remove existing jointing grit and detritus by high pressure water jet.
2. Reset the pavers which will have become displaced. Replace any damaged pavers at this time since they will have been loosened.
3. Apply 6.3-2mm single size grit to the joints, using a stiff brush to sweep the material in, ensuring joints are filled.
4. Finish off as above.
Important notesInstructions and warningsRefer to page 130.
Vibrant long-lasting colours*Tobermore only use high quality Iron Oxide pigments, (which are made to BS EN 12878), to produce our strong, vibrant and deep colours. Our state-of-the-art equipment makes our products extremely dense thus ensuring that our colours remain intact for very long periods. For example when we examine products which are 10 years old we can see that the colour retention is excellent. Tobermore would recommend that to maintain the colour and quality of product a regular maintenance programme is carried out on all projects.
62
Hyd
ropa
ve P
erm
eabl
e Pa
ving
A DOMESTIC
BCAR PARKING
CPEDESTRIAN
D SHOPPING
E COMMERCIAL
FHEAVY TRAFFIC
No large goods vehicles Emergency large goods vehicles only
1 large goods vehicle per week
10 large goods vehicle per week
100 large goods vehicle per week
1000 large goods vehicle per week
Zero standard axles 100 standard axles 0.015msa* 0.015msa* 1.5msa* 15msa*
Patio Car parking bays and aisles Town/city pedestrian street Retail development delivery access route Industrial premises Main road
Private drive Railway Station platform Nursery access School/college access road Lightly trafficked public road Distribution centre
Decorative feature External car showroom Parking area to residential development Office block delivery route Light industrial development Bus station
(bus every 5 minutes)
Enclosed playground Sports stadium pedestrian route
Garden centre external display area
Deliveries to small residential development
Mixed retail/industrial development Motorway truck stop
Footway with zero vehicle overrun
Footway with occasional overrun Cemetry/crematorium Garden centre delivery route Town square Bus stop
Private drive/footway crossover Motel parking Fire station yard Footway with regular overrun Roundabout
Airport car park with no bus pick-up
Airport car park with bus terminal Airport landside roads Bus lane
Sports centre Sports stadium access route/forecourt
Dense Bitumen Macadam (DMBM) alternative to cement stabilised coarse graded aggregate
zero cement bound zero cement bound 125mm cement bound 150mm cement bound 200mm cement bound CGA 300mm cement bound CGA
zero DBM50 zero DBM50 70mm DBM50 100mm DBM50 130mm DBM35 200mm DBM35
LOADING CATEGORY TABLE
*msa = millions of standard 8,000kg axles
catalogue of designs
The following common designs are intended solely for use at scheme appraisal stage and should not be relied upon in substitution for obtaining a permeable paving design that has been prepared by a suitably qualified engineer specifically for the scheme.
Note: In the case of attenuation designs, subgrade CBR values are equilibrium moisture content values. In the case of infiltration designs, subgrade CBR values are soaked values. Capping thickness may need to be adjusted upwards to achieve a firm working platform which can sustain loads from construction traffic without deforming excessively and which can offer sufficient reaction to allow the overlying materials to be fully compacted. All pavements must meet the requirements of BS7533 Part 3 in terms of installation. The thicknesses of coarse graded aggregate will be suitable for the traffic conditions shown and in the case of attenuation designs should be sufficiently thick to meet the attenuation requirements. However, a site specific hydraulic analysis should be carried out
using the method set out in the Interpave Guidelines. In the case of infiltration designs, there is usually no need to check hydraulic capacity but a check must be made on the infiltration capacity of the ground. (The ground must be proven to accept sufficient water which will have to be scaled up if the pavement is infiltrating water draining towards it from impermeable paving or from downpipes.) Where traffic weights exceed those commonly encountered on public highways, specialised design advice should be sought. Where light vans are included, their maximum capacity is 15kN (300cwt).
Sub-base & Capping LayersCapping thickness to be sufficient to provide a firm working platform or in the case of low CBR subgrades ground stabilisation may be more cost effective. If CBR is 5% or greater then capping layers are not required. It is advised that all sites need independent inspection and assessment by a suitably qualified engineer prior to project commencement.
Important Information
Any technical information provided by Tobermore in relation to any product (whether before or after order) is provided by way of GUIDANCE ONLY and, to the fullest extent permitted by law, without liability on the part of Tobermore for any loss or damage suffered as a result of relying upon it. Such technical information should not be relied upon in substitution for obtaining independent expert advice prior to using any product from both a suitably qualified engineer and building contractor, in particular, as to the suitability of the product for use at the intended site for the intended scheme.
hydropa
ve
permeab
le
paving
guidelines for the
design & installation of
Tobermore’s range of
hydropave products
v2.1
TM
hydropavepermeablepaving
guidelines for the
design & installation of
Tobermore’s range of
hydropave products
v2.1
TM
hydropavepermeablepaving
guidelines for the design & installation of Tobermore’s range of hydropave products
v2.1
TM Hydropave Permeable Paving Brochure also available
attenuation designsLOADING CATEGORY B 1-5%CBR
60mm or 80mm thickness Hydropave Permeable Paving.
50mm thickness of 6.3-2mm grit to BS EN13242:2002.
350mm thickness 4/20mm coarse graded aggregate to BS EN13242:2002
Layer of impermeable membrane to BS 7533 Part 13.
Sub-base & Capping Layers Capping thickness to be sufficient to provide a firm working platform or in the case of low CBR subgrade ground stabilisation may be more cost effective.
Outflow pipe - diameter according to project requirements (with perforated End Cap to prevent blockage of the pipe and a Top Hat Seal is used to achieve a water tight connection)
Conventional edge restraint
An upper geotextile is optional on this design.
LOADING CATEGORY E 1-5%CBR
80mm thickness Hydropave Permeable Paving.
50mm thickness of 6.3-2mm grit to BS EN13242:2002.
200mm thickness cement stabilised coarse graded aggregate to BS EN13242:2002.
Layer of impermeable membrane to BS 7533 Part 13.Sub-base & Capping Layers Capping thickness to be sufficient to provide a firm working platform or in the case of low CBR subgrade ground stabilisation may be more cost effective.
Outflow pipe - diameter according to project requirements (with perforated End Cap to prevent blockage of the pipe and a Top Hat Seal is used to achieve a water tight connection)
Conventional edge restraint
150mm thickness 4/20mm coarse graded aggregate to BS EN13242:2002.
An upper geotextile is optional on this design.
infiltration designsLOADING CATEGORY B 5%CBR
Conventional edge restraint60mm or 80mm thickness Hydropave Permeable Paving.
50mm thickness of 6.3-2mm grit to BS EN13242:2002.
350mm thickness c4/20mm coarse graded aggregate to BS EN13242:2002.
Geotextile filter fabric to BS7533 Part 13.
An upper geotextile is optional on this design.
LOADING CATEGORY E 5%CBR
80mm thickness Hydropave Permeable Paving.
50mm thickness of 6.3-2mm grit to BS EN13242:2002.
200mm thickness cement stabilised coarse graded aggregate to BS EN13242:2002.
Conventional edge restraint
150mm thickness 4/20mm coarse graded aggregate to BS EN13242:2002.
Geotextile filter fabric to BS7533 Part 13.
63
Hyd
ropa
ve P
erm
eabl
e Pa
ving
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
The design sections shown should be checked and cross referenced by a qualified engineer against BS7533 Part 13. Other design examples are available on request or by visiting the Hydropave section on our website.
The design sections shown should be checked and cross referenced by a qualified engineer against BS7533 Part 13. Other design examples are available on request or by visiting the Hydropave section on our website.
hard-wearing surface layer
non-slip surface
vibrant long-lasting colours
efflorescence significantly reduced
64
Pavi
ng F
lags
Mayfair Flags Silver and Shannon Charcoal | Rochdale Sixth Form College, Greater Manchester
pavingflags
product range
mayfair flags 66
textured flags 68
riven flags 70
standard flags 72
tactile flags 74
historic flags 76
kensington flags 78
technical information 81
world class
Tobermore produce one of the widest ranges and finishes of paving flags available in the industry. Our high quality selection is produced using the most modern manufacturing processes available and offer excellent physical performance, pleasing aesthetic appearance, reconstitution abilities and overall life-long cost-effectiveness.We have flag options to suit both commercial and domestic projects. Our collection includes a variety of traditional and contemporary flag styles, granite, smooth, textured and riven finishes, vibrant solid and blended colour options, and a range of flag sizes.
65
Pavi
ng F
lags
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
66
Pavi
ng F
lags
Mayfair Flags Silver | Mosaic, Victoria Street, St Albans
67
Pavi
ng F
lags
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
mayfair flagsvibrant granite appearance• Manufactured with sparkling natural granite aggregates• Superb hard-wearing granite surface• Vibrant long-lasting colours*• Significantly reduced efflorescence**• Creates a striking, contemporary look• Step Flags are available
product specifications coloursProduct type Concrete Paving FlagManufactured to BS EN 1339:2003Surface layer Hard wearing surface layer with a minimum of 4mm
and >390kgs/m3 cementGranite content Not less than 57% of granite aggregate in surface
layer for Silver, Graphite and Russet; Not less than 46% of granite aggregate in surface layer for Sandstone; Not less than 32% of granite aggregate in surface layer for Rose
Efflorescence** Minimum 12 hour vapour curing to significantly reduce the possibility of efflorescence
Strength > 3.5MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-4:2006
Q25 315Applications Suitable for all pedestrian areas and traffic-free zones.
Some of these specific sizes are suitable for occasional vehicular overrun. Always refer to BS 7533-8:2003 for guidance on the correct flag size to suit your application.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint* kgCo2e/m2
35mm 40mm 50mm 65mm 70mmSilverSandstoneGraphiteRussetRose
14*15*15*15*15*
16*17*17*17*17*
19*22*24*22*22*
24*28*30*
30*32*32*32*32*
Recyclable 100% of this product can be recycledRecycled content(Not less than %)
35mm 40mm 50mm 65mm 70mmSilverGraphiteRusset
22%22%22%
20%20%20%
16%16%16%
12%12%-
11%11%-
Manufacturing location Produced in the UK with locally sourced materials rating
www.bre.co.ukA, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
eco version available
product size (mm) finish edge colours availablein
stockno. per
m2 no. per pack
weight (kg) per pack
MAYFAIR FLAGS BIM 600 x 600 x 50 GRANITE TEXTURED CHAMFERED Graphite, Sandstone, Silver YES 2.78 20 859600 x 400 x 50 GRANITE TEXTURED CHAMFERED Graphite, Sandstone, Silver YES 4.16 20 589
Rose, Russet SPECIAL ORDER
450 x 450 x 70 GRANITE TEXTURED CHAMFERED Graphite, Sandstone, Silver YES 4.94 15 512Rose, Russet SPECIAL
ORDER450 x 450 x 50 GRANITE TEXTURED CHAMFERED Graphite, Sandstone, Silver YES 4.94 20 470
Rose, Russet SPECIAL ORDER
450 x 450 x 35 GRANITE TEXTURED CHAMFERED Graphite, Sandstone, Silver YES 4.94 30 529Rose, Russet SPECIAL
ORDER400 x 400 x 40 GRANITE TEXTURED CHAMFERED Graphite, Sandstone, Silver, Rose, Russet YES 6.25 25 384400 x 400 x 65 GRANITE TEXTURED CHAMFERED Graphite, Silver YES 6.25 16 395
Sandstone MADE TO ORDER
Silver
Sandstone
Graphite
Rose
Russet
step product available
Mayfair Flags Sandstone, Silver & Graphite
This product is available to download from our website in BIM Level 2 format.BIM
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
68
Pavi
ng F
lags
Textured Flags Buff | Tibshelf Community School, Derbyshire
69
Pavi
ng F
lags
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
textured flagsbeautiful granular surface• Superb hard-wearing textured surface • Vibrant long-lasting colours*• Significantly reduced efflorescence** • Manufactured with a unique granular surface• Natural appearance• Step Flags are available
product specifications colours
eco version available
Natural
Charcoal
Red
Golden
Buff
product size (mm) finish edge colours availablein
stockno. per
m2 no. per pack
weight (kg) per pack
TEXTURED FLAGS BIM 900 x 600 x 50 TEXTURED SQUARE Natural TEXTURED TO ORDER 1.85 20 1350
600 x 600 x 63 TEXTURED SQUARE Natural SPECIAL ORDER 2.78 16 868
600 x 600 x 50 PATIO TEXTURED CHAMFERED Buff, Charcoal, Golden, Natural, Red YES 2.78 20 850600 x 600 x 40 PATIO TEXTURED CHAMFERED Buff, Charcoal, Golden, Natural, Red YES 2.78 24 793450 x 450 x 70 TEXTURED CHAMFERED Buff, Natural YES 4.94 15 512
Charcoal, Red SPECIAL ORDER
450 x 450 x 50 TEXTURED CHAMFERED Buff, Charcoal, Natural YES 4.94 20 474Red SPECIAL
ORDER
450 x 450 x 35 TEXTURED CHAMFERED Buff, Charcoal, Natural, Red YES 4.94 30 521400 x 400 x 65 TEXTURED CHAMFERED Buff, Charcoal, Natural YES 6.25 16 400
Golden, Red SPECIAL ORDER
400 x 400 x 50 TEXTURED CHAMFERED Buff, Charcoal, Natural YES 6.25 20 397Golden, Red SPECIAL
ORDER
400 x 400 x 40 TEXTURED CHAMFERED Buff, Charcoal, Golden, Natural, Red YES 6.25 25 403
Product type Concrete Paving FlagManufactured to BS EN 1339:2003Surface layer Hard wearing surface layer with a minimum of 4mm
and >390kgs/m3 cementEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.5MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-4:2006
Q25 315Applications Suitable for all pedestrian areas and traffic-free zones.
Some of these specific sizes are suitable for occasional vehicular overrun. Always refer to BS 7533-8:2003 for guidance on the correct flag size to suit your application.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 900x600x50mm:
600x600x63mm:600x600x50mm:600x600x40mm:450x450x70mm:450x450x50mm:450x450x35mm:400x400x65mm:400x400x50mm:400x400x40mm:
20kgCo2e/m2
28kgCo2e/m2
22kgCo2e/m2
16kgCo2e/m2
30kgCo2e/m2 (Buff 32kgCo2e/m2) 22kgCo2e/m2
15kgCo2e/m2 (Buff 17kgCo2e/m2) 28kgCo2e/m2
22kgCo2e/m2
19kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
step product available
Textured Flags Natural
This product is available to download from our website in BIM Level 2 format.BIM
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
70
Pavi
ng F
lags
Riven Flags Natural | Example
71
Pavi
ng F
lags
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
riven flagsnatural stone appearance• Superb hard-wearing riven surface• Vibrant long-lasting colours*• Significantly reduced efflorescence** • Resembles the rugged appearance of natural stone
product specifications coloursNatural
Charcoal
Rust
Golden
Buff
product size (mm) finish edge colours availablein
stockno. per
m2 no. per pack
weight (kg) per pack
RIVEN FLAGS 450 x 450 x 35 RIVEN CHAMFERED Buff, Charcoal, Natural, Rust YES 4.94 30 532400 x 400 x 40 RIVEN CHAMFERED Charcoal, Golden, Natural YES 6.25 25 395
Rust, Buff MADE TO ORDER
Product type Concrete Paving FlagManufactured to BS EN 1339:2003Surface layer Hard wearing surface layer with a minimum of 4mm
and >390kgs/m3 cementEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.5MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-4:2006
Q25 315Applications Suitable for all pedestrian areas and traffic-free zones.
Always refer to BS 7533-8:2003 for guidance on the correct flag size to suit your application.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 450x450x35mm:
400x400x40mm: 16kgCo2e/m2
18kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
Riven Flags Golden
72
Pavi
ng F
lags
Standard Non-Slip Flags Charcoal | Retail Park
73
Pavi
ng F
lags
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
This product is available to download from our website in BIM Level 2 format.BIM
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
standard flagssmooth finish• Non-slip finish• Superb hard-wearing surface• Vibrant long-lasting colours*• Significantly reduced efflorescence**
product specifications coloursNatural
Charcoal
Red
Golden
Buff
product size (mm) finish edge colours availablein
stockno. per
m2 no. per pack
weight (kg) per pack
STANDARD FLAGS BIM 600 x 600 x 50 PATIO NON-SLIP CHAMFERED Charcoal, Golden, Natural, Red YES 2.78 20 850600 x 600 x 40 PATIO NON-SLIP CHAMFERED Buff, Charcoal, Golden, Natural, Red YES 2.78 24 793450 x 450 x 70 PATIO NON-SLIP CHAMFERED Buff, Charcoal, Natural, Red SPECIAL
ORDER 4.94 15 512450 x 450 x 50 PATIO NON-SLIP CHAMFERED Buff, Charcoal, Natural YES 4.94 20 474
Red SPECIAL ORDER
450 x 450 x 35 NON-SLIP CHAMFERED Buff, Charcoal, Natural, Red YES 4.94 30 515400 x 400 x 65 NON-SLIP SMOOTH CHAMFERED Buff, Charcoal, Golden, Natural, Red SPECIAL
ORDER 6.25 16 400400 x 400 x 50 NON-SLIP SMOOTH CHAMFERED Buff, Charcoal, Golden, Natural, Red SPECIAL
ORDER 6.25 20 392400 x 400 x 40 NON-SLIP SMOOTH CHAMFERED Buff, Charcoal, Golden, Natural, Red YES 6.25 25 403
Product type Concrete Paving FlagManufactured to BS EN 1339:2003Surface layer Hard wearing surface layer with a minimum of 4mm
and >390kgs/m3 cementEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.5MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-4:2006
Q25 315Applications Suitable for all pedestrian areas and traffic-free zones.
Some of these specific sizes are suitable for occasional vehicular overrun. Always refer to BS 7533-8:2003 for guidance on the correct flag size to suit your application.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 600x600x50mm:
600x600x40mm:450x450x70mm: 450x450x50mm:450x450x35mm:400x400x65mm: 400x400x50mm:400x400x40mm:
22kgCo2e/m2
16kgCo2e/m2
30kgCo2e/m2 (Buff 31kgCo2e/m2) 22kgCo2e/m2
15kgCo2e/m2 (Buff 16kgCo2e/m2) 28kgCo2e/m2
22kgCo2e/m2
18kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
Standard Non-Slip Flags Charcoal & Natural
74
Pavi
ng F
lags
Tactile Flags Blister Buff with Retro Heather and Sienna Silver| Junction One Retail Park,Antrim
75
Pavi
ng F
lags
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
tactile flags• Available in Blister, Off Set Blister, Hazard Warning and
Cycleway finishes• Superb hard-wearing surface• Vibrant long-lasting colours*• Significantly reduced efflorescence**
product specifications coloursNatural
Buff
Red
product size (mm) finish edge colours availablein
stockno. per
m2 no. per pack
weight (kg) per pack
TACTILE FLAGS 400 x 400 x 50 BLISTER SQUARE Buff, Red YES 6.25 20 393400 x 400 x 50 HAZARD WARNING SQUARE Buff, Natural YES 6.25 20 416400 x 400 x 50 CYCLEWAY SQUARE Buff YES 6.25 20 397400 x 400 x 50 OFF SET SQUARE Buff, Red SPECIAL
ORDER 6.25 20 396
Product type Concrete Paving FlagManufactured to BS EN 1339:2003Surface layer Hard wearing surface layer with a minimum of 4mm
and >390kgs/m3 cementEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.5MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-4:2006
Q25 320Applications Suitable for all pedestrian areas and traffic-free zones.
Always refer to BS 7533-8:2003 for guidance on the correct flag size to suit your application.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 22kgCo2e/m2 Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
types
Blister flags enable the partially blind to distinguish between different types of crossing zones.
Red relates to controlled crossing zones, while Buff is available to distinguish uncontrolled crossing zones.
Off Sett Blister flags are used to indicate the edge of the platform at rail and tram stations.
This pattern of half-rod shaped bars provides warning of a hazard which requires caution e.g. at the top and bottom of a flight of stairs, at a cross-roads on a shared pedestrian/cycleway, at a level crossing.
It is recommended that the surface be in contrasting colour to the surrounding area so as to assist partially sighted people.
This bar pattern is used on a shared pedestrian/cycle route, which is not segregated by different levels. It is laid in two orientations, transverse to denote pedestrian path and longitudinal to denote cycle path.
It is recommended that the surface be in contrasting colour to the surrounding area so as to assist partially sighted people.
Blister Off Set Blister
Hazard Warning Cycleway
Tactile Flags Blister Buff
76
Pavi
ng F
lags
Historic Flags Slate | Cutters Wharf, Belfast
77
Pavi
ng F
lags
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
This product is available to download from our website in BIM Level 2 format.BIM
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
historic flags & circlesvintage style and charm• Provides the look and feel of traditional natural stone• Superb hard-wearing surface • Vibrant long-lasting colours*• Significantly reduced efflorescence** • Features beautiful fettled edges and a riven face• Available in a mixed size pack• Allows fast installation
• An inspiring focal point can be created with Historic Circle
product specifications coloursBracken
Harvest Gold
Slate
product size (mm) edge colours availablein
stockm2 per pack
m2 per slice
no. per pack
weight (kg) per pack
HISTORIC FLAGS BIM(all sizes in one pack)
600 x 450 x 50 FETTLED Bracken, Harvest Gold, Slate YES 10.8 1.08 10 1238600 x 300 x 50 10450 x 450 x 50 20450 x 300 x 50 10300 x 300 x 50 10
HISTORIC CIRCLE 2.24m diameter FETTLED Bracken, Harvest Gold, Slate YES 4.53 - 1 circle 455
Product type Concrete Paving FlagManufactured to BS EN 1339:2003Surface layer Hard wearing surface layer with a minimum of 4mm
and >350kgs/m3 cementEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.5MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-4:2006
Q25 315Applications Residential and commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 18kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
Historic Flags Bracken
Important Information
Historic Flags should be butt jointed as wide joints are not recommended. Please use Rompox or similar material to fill joints in preference to mortar, which can stain the product.
CircleFlags
CircleFlags
CircleFlags
78
Pavi
ng F
lags
Kensington Flags Black/White | Example
79
Pavi
ng F
lags
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
kensington flagsstriking mediterranean look• Superb hard-wearing smooth surface • Vibrant long-lasting colours*• Significantly reduced efflorescence** • Beautifully unique colour blends • Showcases an attractive marbling effect • Creates a chic, sophisticated look
product specifications coloursBlack/White
Buff/Charcoal
Buff/Red
Buff/Chocolate
product size (mm) finish edge colours availablein
stockno. per
m2 no. per pack
weight (kg) per pack
KENSINGTON FLAGS 400 x 400 x 40 NON-SLIP SMOOTH CHAMFERED Buff/Charcoal, Buff/Chocolate YES 6.25 25 403400 x 400 x 40 TEXTURED CHAMFERED Buff/Red, White/Black YES 6.25 25 403
Product type Concrete Paving FlagManufactured to BS EN 1339:2003Surface layer Hard wearing surface layer with a minimum of 4mm
and >390kgs/m3 cementEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.5MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-4:2006
Q25 315Applications Suitable for all pedestrian areas and traffic-free zones.
Always refer to BS 7533-8:2003 for guidance on the correct flag size to suit your application.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 19kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
Kensington Flags Buff/Charcoal
80
Pavi
ng F
lags
Mayfair Flags Silver | Bangor Aurora Aquatic & Leisure Complex
81
Pavi
ng F
lags
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
technical informationpaving flagsImportant Information
Any technical information provided by Tobermore in relation to any product (whether before or after order) is provided by way of GUIDANCE ONLY and, to the fullest extent permitted by law, without liability on the part of Tobermore for any loss or damage suffered as a result of relying upon it. Such technical information should not be relied upon in substitution for obtaining independent expert advice prior to using any product from both a suitably qualified engineer and building contractor, in particular, as to the suitability of the product for use at the intended site for the intended scheme.
Paving Flags are now an established product in the construction industry and has a number of British Standards (BS) dedicated to the range to ensure it is professionally installed. Refer to the following relevant BS guidelines for detailed information.
Note: BS guidelines are subject to change and therefore you should refer to www.bsigroup.com for the latest version.
Important notesEdge restraintAll paved areas require an edge restraint to prevent lateral movement of the paved area and to restrict the loss of laying course material. Edge restraints can be existing structures, kerbs, channels or standard paving blocks bedded onto and haunched with concrete.
Paving flag spacers and pedestalsTobermore can provide flag spacers to ensure accurate joint width and also pedestal spacers to support paving products on roof surfaces. Contact Tobermore for further information.
Instructions and warningsRefer to page 130.
BS 7533-1:2001 Pavements constructed with clay, natural stone or concrete pavers. Guide for the structural design of heavy duty pavements constructed of clay or concrete pavers.
BS 7533-2:2001 Pavements constructed with clay, natural stone or concrete pavers. Guide for the structural design of lightly trafficked pavements contructed of clay pavers or precast concrete paving blocks.
BS 7533-4:2006 Pavements constructed with clay, natural stone or concrete pavers. Code of practice for the construction of pavements of precast concrete flags or natural stone slabs.
BS 7533-11:2003 Code of practice for the opening, maintenance and reinstatement of pavements of concrete, clay and natural stone.
BS 7533-12:2006 Pavements constructed with clay, natural stone or concrete pavers. Guide to the structural design of trafficked pavements constructed on a bound base using concrete paving flags and natural stone slabs.
BS 7533-13:2009 Pavements constructed with clay, natural stone or concrete pavers. Guide for the design of permeable pavements constructed with concrete paving blocks and flags, natural stone slabs and setts and clay pavers.
Historic Flags Slate and Kerbstone Charcoal
Vibrant long-lasting colours*Tobermore only use high quality Iron Oxide pigments, (which are made to BS EN 12878), to produce our strong, vibrant and deep colours. Our state-of-the-art equipment makes our products extremely dense thus ensuring that our colours remain intact for very long periods. For example when we examine products which are 10 years old we can see that the colour retention is excellent. Tobermore would recommend that to maintain the colour and quality of product a regular maintenance programme is carried out on all projects.
82
Step
s
Mayfair Step Flags Silver with Delineation Strip Black, Mayfair Flags Silver and Hazard Warning Flags Buff | NAMRC
stepsTobermore produce a range of high quality step products which meet the requirements outlined in building regulations and guidelines.There are no limits to what is achievable when it comes to designing and constructing steps. The versatility of Tobermore step products provides the ability to design and create step units in a wide range of sizes, shapes and colours. The various step finishes and colours available allow the creation of an attractive feature area.
product range
mayfair step flags with delineation strip 84
mayfair step flags 86
textured step flags 87
step risers 88
granite step unit 89
technical information 91
world class
83
Step
s
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
84
Step
s
Mayfair Step Flags Silver with Delineation Strip Black, Mayfair Flags Silver and Hazard Warning Flags Buff | NAMRC
85
Step
s
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
Mayfair Step Flags with Black delineation strip
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
mayfair step flagswith delineation strip• Vibrant granite appearance• Manufactured with sparkling natural granite aggregates• Superb hard-wearing granite surface• Vibrant long-lasting colours*• Significantly reduced efflorescence**• Creates a striking, contemporary look
product specifications coloursProduct type Concrete Paving FlagManufactured to BS EN 1339:2003Surface Layer Hard wearing surface layer with a minimum of 4mm
and >390kgs/m3 cementGranite content Not less than 57% of granite aggregate in surface
layer for Silver and Graphite; Not less than 46% of granite aggregate in surface layer for Sandstone.
Efflorescence** Minimum 12 hour vapour curing to significantly reduce the possibility of efflorescence
Strength > 3.5MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-4:2006
Q25 315Applications The product should be designed into projects using
Building regulations 2000, Part M, Access to and use of buildings for guidance.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 40mm
50mm
Silver: Sandstone: Graphite:Silver: Sandstone: Graphite:
16kgCo2e/m2
17kgCo2e/m2
17kgCo2e/m2
19kgCo2e/m2
22kgCo2e/m2
24kgCo2e/m2
Recyclable 100% of this product can be recycledRecycled content Not less than 20% of 40mm and 16% of 50mm
recycled materials included (Silver/Graphite only)Manufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved when used in conjunction with a prepared recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
Silver with Black delineation strip
product size (mm) finish edge colours availablein
stockno. per
m2 no. per pack
weight (kg) per pack
MAYFAIR EDGE STEPwith delineation strip
400 x 400 x 40 GRANITE TEXTURED (top & 1 edge)
CHAMFERED Silver Flag WITH Black Strip YES 6.25 25 403
600 x 400 x 50 GRANITE TEXTURED(top & 1 edge)
CHAMFERED Silver Flag WITH Black Strip SPECIAL ORDER 4.16 20 589
MAYFAIR CORNER STEP with delineation strip
400 x 400 x 40 GRANITE TEXTURED (top & 2 edges)
CHAMFERED Silver Flag WITH Black Strip YES 6.25 25 403
MAYFAIR STEP RISER 400 x 170 x 40 GRANITE TEXTURED CHAMFERED Silver(can be produced with or without delineation strip)
SPECIAL ORDER - 25 195
Mayfair Corner Step 400 x 400 x 40mm with Delineation Strip
Mayfair Corner Step 400 x 400 x 40mm with Delineation Strip
Mayfair Edge Step 400 x 400 x 40mm with Delineation Strip
Doorway
step example
product profile
Mayfair Step Riser Silver 400 x 170 x 40mm with Black Delineation Strip
400
40
170
86
Step
s
ISO 9001:2008 ISO 14001:2004
mayfair step flagsvibrant granite appearance• Manufactured with sparkling natural granite aggregates• Superb hard-wearing granite surface• Vibrant long-lasting colours*• Significantly reduced efflorescence**• Creates a striking, contemporary look
product specifications coloursProduct type Concrete Paving FlagManufactured to BS EN 1339:2003Surface layer Hard wearing surface layer with a minimum layer of
4mm and >390kgs/m3 cementGranite content Not less than 57% of granite aggregate in surface
layer for Silver and Graphite; Not less than 46% of granite aggregate in surface layer for Sandstone.
Efflorescence** Minimum 12 hour vapour curing to significantly reduce the possibility of efflorescence
Strength > 3.5MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-4:2006
Q25 315Applications The product should be designed into projects using
Building regulations 2000, Part M, Access to and use of buildings for guidance.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint Edge Step
40mm 50mm
Silver:
Sandstone: Graphite: Silver:
Sandstone: Graphite:
16kgCo2e/m2
17kgCo2e/m2
17kgCo2e/m2
19kgCo2e/m2
22kgCo2e/m2
24kgCo2e/m2
Corner Step40mm 50mm
Silver:
Sandstone: Graphite: Silver:
Sandstone: Graphite:
16kgCo2e/m2
17kgCo2e/m2
17kgCo2e/m2
19kgCo2e/m2
22kgCo2e/m2
24kgCo2e/m2
Recyclable 100% of this product can be recycledRecycled Content Not less than 20% of 40mm and 16% of 50mm
recycled materials included (Silver/Graphite only)Manufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved when used in conjunction with a prepared recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
product size (mm) finish edge colours availablein
stockno. per
m2 no. per pack
weight (kg) per pack
MAYFAIR EDGE STEP* 600 x 400 x 50 GRANITE TEXTURED (top & 1 edge) CHAMFERED Graphite, Sandstone, Silver YES 4.16 20 589400 x 400 x 40 GRANITE TEXTURED (top & 1 edge) CHAMFERED Graphite, Sandstone, Silver YES 6.25 25 403
MAYFAIR CORNER STEP* 600 x 400 x 50 GRANITE TEXTURED (top & 2 edges) CHAMFERED Graphite, Sandstone, Silver YES 4.16 20 589400 x 400 x 40 GRANITE TEXTURED (top & 2 edges) CHAMFERED Graphite, Sandstone, Silver YES 6.25 25 403
MAYFAIR STEP RISER* 400 x 170 x 40 GRANITE TEXTURED CHAMFERED Graphite, Sandstone, Silver SPECIAL ORDER - 25 195
Silver
Sandstone
Graphite
*The colour of Mayfair Step Flags may slightly vary to the normal Mayfair Flag.
step example
Mayfair Step Riser 400 x 170 x 40mm
Mayfair Corner Step400 x 400 x 40mm(Top & 2 edges textured)
Mayfair Edge Step400 x 400 x 40mm(Top & 1 edge textured)
See instructions and warnings on page 130
87
Step
s
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
textured step flagsbeautiful granular surface• Superb hard-wearing textured surface • Vibrant long-lasting colours*• Significantly reduced efflorescence** • Manufactured with a unique granular surface• Natural appearance
product specifications coloursProduct type Concrete Paving FlagManufactured to BS EN 1339:2003Surface layer Hard wearing surface layer with a minimum layer of
4mm and >390kgs/m3 cementEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.5MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-4:2006
Q25 315Applications The product should be designed into projects using
Building regulations 2000, Part M, Access to and use of buildings for guidance.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint Edge Step
35mm: 40mm:
15kgCo2e/m2
19kgCo2e/m2
Corner Step35mm: 40mm:
15kgCo2e/m2 (Buff 17kgCo2e/m2) 19kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
A, according to the Green Guide to Specification, 4th Edition 2009. A+, can be achieved by using a recycled sub-base.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
product size (mm) finish edge colours availablein
stockno. per
m2 no. per pack
weight (kg) per pack
TEXTURED EDGE STEP* 450 x 450 x 35 TEXTURED (top & 1 edge) CHAMFERED Buff, Charcoal, Natural YES 4.94 30 521400 x 400 x 40 TEXTURED (top & 1 edge) CHAMFERED Charcoal, Golden, Natural YES 6.25 25 403
TEXTURED CORNER STEP* 450 x 450 x 35 TEXTURED (top & 2 edges) CHAMFERED Buff, Charcoal, Natural YES 4.94 30 521400 x 400 x 40 TEXTURED (top & 2 edges) CHAMFERED Charcoal, Golden, Natural YES 6.25 25 403
TEXTURED STEP RISER* 400 x 170 x 40 TEXTURED CHAMFERED Buff, Golden, Charcoal, Natural SPECIAL ORDER - 25 195
Natural Charcoal
GoldenBuff
*The colour of Textured Step Flags may slightly vary to the normal Textured Flag.
step example
Textured Step Riser 400 x 170 x 40mm
Textured Corner Step400 x 400 x 40mm(Top & 2 edges textured)
Textured Edge Step400 x 400 x 40mm(Top & 1 edge textured)
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
88
Step
s
ISO 9001:2008 ISO 14001:2004
step risersdecorative step edging• Enables the creation of distinctive and contrasting step edges • A functional and aesthetically pleasing product• Superb hard-wearing smooth surface • Vibrant long-lasting colours*• Significantly reduced efflorescence** • Various Tobermore products can be used to infill the tread
behind Step Risers
product specifications coloursProduct type Concrete KerbManufactured to BS EN 1338:2003Efflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.6MPaSlip/Skid resistance Extremely Low (>75 USRV)Installed to BS 7533-6:1999
Q10 150Applications The product should be designed into projects using
Building regulations 2000, Part M, Access to and use of buildings for guidance.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemRecyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
Refer to the Green Guide to Specification, 4th Edition 2009.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
Heather
Natural
Bracken
Charcoal
product size (mm) colours availablein
stockno. per
sliceno. per pack
weight (kg) per pack
STEP RISERS 190 x 160 x 100 Bracken, Charcoal, Heather, Natural YES 40 240 1669104 x 173 x 80 Bracken, Charcoal, Heather, Natural YES 80 560 1865
80 104
173
100
190
160
Step Risers Charcoal with Tegula Setts Heather
product profile
See instructions and warnings on page 130
89
Step
s
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
750
350
150
1000
350
150
granite step unitvibrant granite appearance• Available with the inclusion of contrasting delineation strip• Manufactured with sparkling natural granite aggregates• Vibrant long-lasting colours*• Significantly reduced efflorescence**• Creates a striking, contemporary look• Complementary step product for Fusion, Sienna and Mayfair
Flag paving products
product specifications coloursProduct type Concrete BlockManufactured to BS EN 1339:2003Efflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.5MPaSlip/Skid resistance Extremely Low (>75 USRV)Applications The product should be designed into projects using
Building regulations 2000, Part M, Access to and use of buildings for guidance.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemRecyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materialsTobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
Granite Aggregate
500
350
150
Granite Step Units with one delineation strip
product profile
product size (mm) finish edge colours availablein
stockno. per pack
weight (kg) per pack
GRANITE STEP UNIT BIM (also available with one or two delination strips in black on request)
350 x 150 x 1000 GRANITE TEXTURED SQUARE Granite Aggregate TEXTURED TO ORDER 10 1200
350 x 150 x 750 GRANITE TEXTURED SQUARE Granite Aggregate MADE TO ORDER 10 900
350 x 150 x 500 GRANITE TEXTURED SQUARE Granite Aggregate MADE TO ORDER 20 1200
This product is available to download from our website in BIM Level 2 format.BIM
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
90
Step
s
Granite Step Units with two delineation strips | Wolstanton Retail Park, Stoke
91
Step
s
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
technical informationstepsImportant Information
Any technical information provided by Tobermore in relation to any product (whether before or after order) is provided by way of GUIDANCE ONLY and, to the fullest extent permitted by law, without liability on the part of Tobermore for any loss or damage suffered as a result of relying upon it. Such technical information should not be relied upon in substitution for obtaining independent expert advice prior to using any product from both a suitably qualified engineer and building contractor, in particular, as to the suitability of the product for use at the intended site for the intended scheme.
There is a wide range of documents and guidance on what aspects need to be taken into consideration when designing stepped access to and from buildings.
The following documents should be referred to for specific guidance:
Note: BS guidelines are subject to change and therefore you should refer to www.bsigroup.com for the latest version.
Important notesTactile FlagsTobermore also supply a range of Tactile Flags. See page 75.
Delineation StripsAll delineation strips are tested for slip resistance in both wet and dry conditions to BS 7976-2:2002. The strips are made from Aluminium Oxide formed in a rigid PVC channel. Care should be taken not to use solvent based cleaners as this can affect the Aluminium Oxide.
Light Reflective Value (LRV)An important consideration for step access is the Light Reflective Value (LRV) of the products that are being considered for use. Products with a sufficient difference in LRV can assist blind and partially sighted people to distinguish between them. Tobermore can provide the LRV results on all products in this brochure. Contact Tobermore for further information.
Instructions and warningsRefer to page 130.
Building Regulations 2000, Part M: Access to and use of buildings.BS 8300:2009+A1:2010 Design of buildings and their approaches to
meet the needs of disabled people.
Mayfair Step Flag Silver with Black delineation strip
Vibrant long-lasting colours*Tobermore only use high quality Iron Oxide pigments, (which are made to BS EN 12878), to produce our strong, vibrant and deep colours. Our state-of-the-art equipment makes our products extremely dense thus ensuring that our colours remain intact for very long periods. For example when we examine products which are 10 years old we can see that the colour retention is excellent. Tobermore would recommend that to maintain the colour and quality of product a regular maintenance programme is carried out on all projects.
92
Ker
bs, E
dgin
g &
Cha
nnel
s
Radii Kerbs Granite Aggregate
kerbs, edging & channelsKerbing is an essential requirement in all commercial and domestic applications to retain paving, create paths or boundaries for bedding areas.The Tobermore range provides practical benefits including the capability for heavy duty use and sustainability over time.Our kerbing solutions offer great versatility, with some unique and decorative options and the choice of different laying orientations available with some of the range.
product range
country kerb & edge 94
radii kerbs 96
quadrant kerbs 97
half battered & bullnosed kerbs & water channel 98
kerbstone 99
kerbsett 100
kerb specials 101
kerb large (kl) 102
tegula kerb large (tkl) 103
world class
93
Ker
bs, E
dgin
g &
Cha
nnel
s
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
94
Ker
bs, E
dgin
g &
Cha
nnel
s
Country Kerb Granite Aggregate | Royal Swiss Apartments, Barnes
95
Ker
bs, E
dgin
g &
Cha
nnel
s
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
product profile
country kerb & edgeheavy-duty kerbing• Features an exposed granular surface• Emulates the unique aged appearance of traditional granite
kerbs• Offers all the benefits of modern concrete kerbing• Designed with strength and durability in mind
product specifications coloursProduct type Concrete KerbManufactured to BS EN 1340:2003Strength > 3.5MPaInstalled to BS 7533-6:1999
Q10 110Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 255x125x915mm:
255x145x915mm:150x75x90mm:
13kgCo2e/ea13kgCo2e/ea4kgCo2e/ea
Recyclable 100% of this product can be recycledRecycled content Not less than 31% recycled materials included
(Granite Aggregate Kerb)Manufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
Refer to the Green Guide to Specification, 4th Edition 2009.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
eco version available
Standard Aggregate
Graphite
Granite Aggregate
product size (mm) colours availablein
stockno. per pack
weight (kg) per pack
COUNTRY KERB BIM 255 x 125 x 915 Granite Aggregate, Standard Aggregate YES 18 1251Graphite SPECIAL
ORDER
255 x 145 x 915 Granite Aggregate YES 16 1282COUNTRY EDGE BIM 150 x 75 x 900 Granite Aggregate YES 60 1200COUNTRY KERB
Dropper(specify left or right hand dropper)
255/150 x 125 x 915 Granite Aggregate, Standard Aggregate MADE TO ORDER 18 915
255/150 x 145 x 915 Granite Aggregate MADE TO ORDER 16 1282
Dropper Centre Kerb 150 x 125 x 915 Granite Aggregate MADE TO ORDER 36 1512
150 x 145 x 915 Granite Aggregate MADE TO ORDER 36 1728
External or Internal Corner 255 x 145 x 915 Granite Aggregate MADE TO ORDER 16 1282
Delineation 255 x 125 x 915 Granite Aggregate with Black Strip SPECIAL ORDER 18 1251
Offlet 255 x 125 x 915 Granite Aggregate SPECIAL ORDER 18 1251
*Kerbs can be cut as required - contact us for further details.
Country Kerb Granite Aggregate Country Edge Granite Aggregate
900
150
75
915
125
255
product profile
This product is available to download from our website in BIM Level 2 format.BIM
915
125
255
Country Kerb Offlet
915
125
255
Front
Back
110
120
280
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
96
Ker
bs, E
dgin
g &
Cha
nnel
s
ISO 9001:2008 ISO 14001:2004
radii kerbsskilled bends, curves and arcs• Specially manufactured radius kerbs, either concave or
convex
product specifications coloursStandard Aggregate Granite Aggregate
product size (mm)no. per
quarter circle colours availablein
stockno. per pack
weight (kg) per pack
RADII KERB 125mm(*radius of curve)
255 x 125 x 780 (3m*) 6 Standard Aggregate, Granite Aggregate TEXTURED TO ORDER 16 1047
255 x 125 x 780 (6m*) 12 Standard Aggregate, Granite Aggregate TEXTURED TO ORDER 16 1070
255 x 125 x 780 (9m*) 16 Standard Aggregate, Granite Aggregate TEXTURED TO ORDER 16 1056
RADII KERB 145mm(*radius of curve)
255 x 145 x 780 (3m*) 6 Granite Aggregate TEXTURED TO ORDER 16 1047
255 x 145 x 780 (6m*) 12 Granite Aggregate TEXTURED TO ORDER 16 1070
255 x 145 x 780 (9m*) 16 Granite Aggregate TEXTURED TO ORDER 16 1056
calculating the radius of a curveThe size of any radius can be determined by measuring the length of a chord stretched between the arc and then measuring a perpendicular to that chord at the centre. This is illustrated in the diagram below.
This is a handy equation often used on site to determine the size of an unknown radius that is to be kerbed, so that the correct size of radius kerbs can be used.
The size of a radius is ALWAYS measured to the face of the kerbline, whether the radius is internal or external. This applies to channel blocks as well as kerbs. In a situation such as that illustrated, both the kerbs and the channel blocks are the same stated radial size.
A A
B
A2 + B2
2BRadius =
Radii Kerb Standard Aggregate
Product type Concrete KerbManufactured to BS EN 1340:2003Strength > 3.5MPaInstalled to BS 7533-6:1999
Q10 110Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 13kgCo2e/eaRecyclable 100% of this product can be recycledRecycled content Not less than 31% recycled materials included
(Granite Aggregate Kerb)Manufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
Refer to the Green Guide to Specification, 4th Edition 2009.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
product profile
780
125
255
See instructions and warnings on page 130
97
Ker
bs, E
dgin
g &
Cha
nnel
s
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
quadrant kerbsneat kerbing finish• Designed to form a subtle curved finish• Manufactured with complementary profiles and finishes• Solid Quadrant Kerbs or Precast Radii Quadrant Kerbs are
available
product specifications coloursProduct type Concrete KerbManufactured to BS EN 1340:2003Strength > 3.5MPaInstalled to BS 7533-6:1999
Q10 110Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemRecyclable 100% of this product can be recycledRecycled content Not less than 31% recycled materials included
(Granite Aggregate Kerb)Manufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
Refer to the Green Guide to Specification, 4th Edition 2009.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
Natural
Standard Aggregate Granite Aggregate
product size (mm) colours availablein
stockno. per pack
weight (kg) per pack
SOLID QUADRANT KERB 255 x 305 Natural, Granite Aggregate, Standard Aggregate MADE TO ORDER 4 184
PRECAST RADII QUADRANT KERB 255 x 125 Natural YES 4 221
product profile
Solid Quadrant Kerb Granite Aggregate
Precast Radii Quadrant Kerb Natural
255
305
255
125
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
Solid Quadrant Kerb Standard Aggregate
98
Ker
bs, E
dgin
g &
Cha
nnel
s
ISO 9001:2008 ISO 14001:2004
half battered & bullnosed kerbs & water channel• Heavy duty kerbing systems• Produced with a natural surface finish• Water Channels are manufactured as a pressed product
product specifications coloursProduct type Concrete KerbManufactured to BS EN 1340:2003Strength 3.5MPaInstalled to BS 7533-6:1999
Q10 110Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemRecyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
Refer to the Green Guide to Specification, 4th Edition 2009.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
Natural
product size (mm) colours availablein
stockno. per pack
weight (kg) per pack
HALF BATTERED KERB 200 x 100 x 915 Natural YES 22 969255 x 125 x 915 Natural YES 18 1232
DROPPER (specify left or right hand dropper) 255/150 x 125 x 915 Natural YES 18 915BULLNOSE KERB 150 x 125 x 915 Natural YES 27 1167WATER CHANNEL 250 x 125 x 915 Natural YES 18 1221
255 915
125
155
250 915
125
150
200 915
100
100
150
125
190
250
125
30 30
15
Product type Concrete ChannelManufactured to BS EN 1340:2003Strength Water Channels > 3.5MPaInstalled to BS 7533-6:1999
Q10 110Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemRecyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
Refer to the Green Guide to Specification, 4th Edition 2009.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
Water Channel Natural
product profile
product profile
Half Battered Kerbs
Half Battered Dropper
Bullnosed Kerb
See instructions and warnings on page 130
99
Ker
bs, E
dgin
g &
Cha
nnel
s
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
This product is available to download from our website in BIM Level 2 format.BIM
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
kerbstoneunique aged look• Tumbled to give an aged, antique appearance • Vibrant long-lasting colours*• All sides are finished so it can be laid in any orientation
product specifications coloursProduct type Concrete KerbManufactured to BS EN 1338:2003Manufacturing process Tumbled to give aged appearanceEfflorescence Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.6MPaInstalled to BS 7533-6:1999
Q10 150Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 190x160x100mm:
104x173x80mm:1.2kgCo2e/m2
0.6kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
Refer to the Green Guide to Specification, 4th Edition 2009.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
Heather
Cedar
Natural
Bracken
Charcoal
product size (mm) colours availablein
stockno. per
packno. per
sliceno. per pack
weight (kg) per pack
KERBSTONE BIM 190 x 160 x 100 Bracken, Cedar, Charcoal, Heather, Natural YES 210 35 210 1460104 x 173 x 80 Bracken, Charcoal, Heather, Natural YES 504 72 504 1638
Kerbstone Natural
100
Ker
bs, E
dgin
g &
Cha
nnel
s
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
kerbsettdecorative edging system• Versatile alternative to traditional concrete kerbs• Dual purpose profile offers various laying options• Vibrant long-lasting colours*• Offers ease of installation• Kerbsett Specials are available
product specifications coloursProduct type Concrete KerbManufactured to BS EN 1338:2003Efflorescence Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.6MPaInstalled to BS 7533-6:1999
Q10 150Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 11kgCo2e/lmRecyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
Refer to the Green Guide to Specification, 4th Edition 2009.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
product size (mm) colours availablein
stocklm per pack
lm per slice
no. per pack
weight (kg) per pack
KERBSETT 190 x 160 x 100 Bracken, Brindle, Charcoal, Heather YES 24 4 240 1497
Heather
Brindle
Bracken
Charcoal
Kerbsett Bracken
CrossoverBlock
190m
100m
110m
160mm
50mm40mm
50mm
100mm
190mm
40mm110mm
50mm18 1/2ϒ
CrossoverRoad/Pavement
Road Surface
Sub-base Kerb-base
Haunching
High Rise
Pavement/verge
Road Surface
Sub-baseKerb-base
Haunching
Low Rise
Pavement/verge
Road Surface
Sub-baseKerb-base
Haunching
CrossoverRoad/Pavement
Road Surface
Sub-base Kerb-base
Haunching
High Rise
Pavement/verge
Road Surface
Sub-baseKerb-base
Haunching
Low Rise
Pavement/verge
Road Surface
Sub-baseKerb-base
Haunching
product profile
laying details
101
Ker
bs, E
dgin
g &
Cha
nnel
s
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
kerb specialsspecialised, decorative edging• Designed to meet specialised kerbing requirements• Various corner, transition, drop and end blocks are available • Vibrant long-lasting colours*
Right Angle CornerExternal High (Type EC/H)
Drop Kerb High Position to Low (Type H-L)
Right Angle CornerInternal High (Type IC/H)
450 Internal Corner Low (Type I45/L) High (Type I45/H)
Right Angle CornerExternal Low (Type EC/L)
450 External Corner Low (Type E45/L) High (Type E45/H)
Transition KerbLow Position to Half Batter (Type L-7)High Position to Half Batter (Type H-7)
Right Angle CornerInternal Low (Type IC/L)
Curves (external radius less than 1m)Low (Type ER/L)High (Type ER/H)
End BlockLow position to End Block (Type L-E)
90º Angle Internal
90º Angle External
Flat 90º Angle External
Flat 90º Angle Internal
Bullnosed 90º Angle Internal
Bullnosed 90º Angle External
90º Angle Internal
90º Angle External
Flat 90º Angle External
Flat 90º Angle Internal
Bullnosed 90º Angle Internal
Bullnosed 90º Angle External
kerbsett specials
kerb large (kl) specials
tegula kerb large (tkl) specials
Kerbsett Special Right Angle Corner External HighThe colour of Kerb Specials may slightly vary to the normal Kerbs.
102
Ker
bs, E
dgin
g &
Cha
nnel
s
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
kerb large (kl)versatile, smooth finish• Versatile alternative to traditional concrete kerbs• Dual purpose profile offers various laying options• Vibrant long-lasting colours*• Kerb Large Specials are available
product specifications coloursProduct type Concrete KerbManufactured to BS EN 1338:2003Efflorescence Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.6MPaInstalled to BS 7533-6:1999
Q10 150Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 11kgCo2e/lmRecyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
Refer to the Green Guide to Specification, 4th Edition 2009.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
Heather
Brindle
Natural
Bracken
Charcoal
product size (mm) colours availablein
stocklm per pack
lm per slice
no. per pack
weight (kg) per pack
KERB LARGE 200 x 127 x 100 Bracken, Brindle, Charcoal, Heather, Natural YES 28.8 4.8 288 1549
Kerb Large (KL) Charcoal
103
Ker
bs, E
dgin
g &
Cha
nnel
s
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
tegula kerb large (tkl)versatile, tumbled appearance• Tumbled to give an aged, antique appearance • Versatile alternative to traditional concrete kerbs• Dual purpose profile offers various laying options• Vibrant long-lasting colours*• Tegula Kerb Large Specials are available
product specifications coloursProduct type Concrete KerbManufactured to BS EN 1338:2003Manufacturing process Tumbled to give aged appearanceEfflorescence Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 3.6MPaInstalled to BS 7533-6:1999
Q10 150Applications Residential and Commercial when used in conjunction
with the correct sub-base design in accordance with the latest British Standard.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 1.2kgCo2e/eaRecyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
Refer to the Green Guide to Specification, 4th Edition 2009.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
Heather
Brindle
Natural
Slate
Bracken
Charcoal
Cedar
product size (mm) colours availablein
stockno. per
packno. per
sliceno. per pack
weight (kg) per pack
TEGULA KERB LARGE 200 x 127 x 100 Bracken, Brindle, Cedar, Charcoal, Heather, Natural, Slate YES 288 48 288 1549
Tegula Kerb Large (TKL) Bracken
104
Wal
ling
& M
ason
ry
Lansdowne Cottage Red | Harrison View, York
walling &masonry
product range
lansdowne facing bricks 106
kingston facing bricks 108
specials 110
advantages of Tobermore facing bricks 112
engineering quality concrete brick 113
country stone 114
technical information 117
world class
105
Wal
ling
& M
ason
ry
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
Tobermore manufacture an innovative collection of walling and masonry products. As well as offering practical benefits with their cost-effectiveness and ease of installation, our products allow the creation of homes and walling features with distinctive visual appeal.A variety of traditional and contemporary styles, surface finishes and vibrant solid and blended colour options are readily available.Our walling and masonry range also complements the Tobermore block paving and paving flag selection beautifully.
106
Wal
ling
& M
ason
ry
Lansdowne Heather | Private Home, Omagh
107
Wal
ling
& M
ason
ry
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
eco version available
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
lansdowne facing bricktimeless elegance• Tumbled to give an aged, antique appearance • Evokes timeless warmth and elegance • Vibrant long-lasting colours*• Significantly reduced efflorescence** • Suitable for both modern or period properties
product specifications coloursProduct type Concrete Facing BrickManufactured to BS EN 771-3:2011Manufacturing process Tumbled to give aged appearanceBrick Type Perforated (3 holes per brick)Efflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 22N/mm2
Shrinkage (Moisture movement) 0.44mm/mWeight 2.7kg per brick (average)Durability (Freeze/Thaw) F2 (Severe Exposure)Tolerances Category D1Reaction to fire A1Water absorption by capillary
2 g/m2s
Water absorption <7% water absorption on averageSoluble Salts S2Net dry density 2220 kg/m3
Gross dry density 1930 kg/m3
Shear bond strength 0.15N/mm2
Thermal Conductivity Protected 1.59W/m K Exposed 1.70 W/m KMortars & Expansion Joints
Refer to BS 5628-3:2005
Bed Reinforcement Refer to BS 5628-3:2005Specials Range of complementary brick specials are availableInstalled to BS 5628-3:2005
F10 215Applications Above ground main external wall construction, and
boundary walls regardless of exposure conditions.Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 22kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
A+, according to the Green Guide to Specification, 4th Edition 2009.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
product size (mm) colours availablein
stockno. per
sliceno. per pack
weight (kg) per pack
LANSDOWNE 215 x 100 x 65 Autumn Gold, Burren, Charcoal, Cottage Red, Gold, Heather, Warm Red YES 96 480 1306
Autumn Gold
Cottage Red
Warm Red
Burren
Heather
Gold
Charcoal
Product Profile
Lansdowne Heather215
100
65
3 perforated voids
108
Wal
ling
& M
ason
ry
Kingston Cottage Red and Charcoal | The Grange, Mansfield
109
Wal
ling
& M
ason
ry
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
eco version available
This product is available to download from our website in BIM Level 2 format.BIM
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
kingston facing bricksmooth, vibrant finish• Manufactured with a smooth, sophisticated surface• Vibrant long-lasting colours*• Significantly reduced efflorescence** • Suitable for both modern or period properties
product specifications coloursAutumn Gold
Cottage Red
Warm Red
Burren
Moorland
Gold
Charcoal
Product type Concrete Facing BrickManufactured to BS EN 771-3:2011Brick Type Perforated (3 holes per brick)Efflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 22N/mm2
Shrinkage (Moisture movement) 0.44mm/mWeight 2.7kg per brick (average)Durability (Freeze/Thaw) F2 (Severe Exposure)Tolerances Category D1Reaction to fire A1Water absorption by capillary
2 g/m2s
Water absorption <7% water absorption on averageSoluble Salts S2Net dry density 2220 kg/m3
Gross dry density 1930 kg/m3
Shear bond strength 0.15N/mm2
Thermal Conductivity Protected 1.59W/m K Exposed 1.70 W/m KMortars & Expansion Joints
Refer to BS 5628-3:2005
Bed Reinforcement Refer to BS 5628-3:2005Specials Range of complementary brick specials are availableInstalled to BS 5628-3:2005
F10 215Applications Above ground main external wall construction, and
boundary walls regardless of exposure conditions.Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 22kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
A+, according to the Green Guide to Specification, 4th Edition 2009.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
Product Profile
product size (mm) colours availablein
stockno. per
sliceno. per pack
weight (kg) per pack
KINGSTON BIM 215 x 100 x 65 Autumn Gold, Burren, Charcoal, Cottage Red, Gold, Moorland, Warm Red YES 44 440 1220Ebony SPECIAL
ORDER
Kingston Autumn Gold
215
100
65
3 perforated voids
Ebony
110
Wal
ling
& M
ason
ry
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
squint L1
L1.1 167 103 65 54 300
L1.2 164 103 65 51 450
L1.3 181 103 65 68 600
Type A B C D ∂
double cant L5
L5.1 215 103 65 47 103
L5.2 215 103 65 60 129
Type A B C D E
single cant L3
L3.1 215 103 65 47 159
L3.2 215 103 65 60 172
Type A B C D E
single cant external return L4
L4.1 215 215 103 47 159
L4.2 215 215 103 60 172
Type A B C D E
dog leg L2
L2.1 164 103 65 103 450
L2.2 164 103 65 103 600
L2.3 207 103 65 94 300
L2.4 207 103 65 94 450
L2.5 207 103 65 94 600
Type A B C D ∂
B
B
C
A
A
A
D C
B
D
D
∂
∂
E E
C
B
C
AD
E
E C
B
A
D
450
specialslansdowne & kingston • Specials comply with the same physical tests as Tobermore’s
standard bricks• Designed to co-ordinate with metric format bricks
(215x100x65mm)• Vibrant long-lasting colours*• Significantly reduced efflorescence** • Suitable for both modern or period properties
The colour of Specials may slightly vary to the standard bricks.
111
Wal
ling
& M
ason
ry
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
See instructions and warnings on page 130
plinth header L7
L7.1 215 103 65 8 159 450
L7.2 215 103 65 22 172 450
Type A B C D E ∂
L8.1 215 103 65 8 47 450
L.2 215 103 65 22 60 450
Type A B C D E ∂
plinth stretcher L8
double cant stop end L6
L6.1 215 215 103 47 103 159
L6.2 215 215 103 60 129 173
Type A B C D E F
AB
D C
EF
A
C
B
E
D
∂
AB
D
E
∂
brick closer/end block L9
L9.1 215 103 65
Type A B C
A
B
C
arch radial L10
Made to suit dimensions supplied by customer.
L11 276 140 65 87 34 66 22
cill brick L11 Type A B C D E F G
A
B
CG
F
D
E
cill brick L12
D
A
BG
EH
C
F
L12 215 148 65 215 53 65 28 20
Type A B C D E F G H
The colour of Specials may slightly vary to the standard bricks.
advantagesof Tobermore facing bricks
Tobermore are a World Class manufacturer and therefore our products provide a number of significant advantages.
Manufacturing standardsTobermore products are manufactured in accordance with an accredited ISO9001:2008 quality system. The facing brick products are manufactured to BS EN 771-3:2011
Environmental Standards & CredentialsManufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with ISO14021:2001. Facing brick have a Carbon Footprint of 22kgCo2/m2. All facing bricks are manufactured with 100% renewable energy and 100% water used from rainwater harvesting systems.
Availability & DeliveryTobermore have one of the largest factories in the UK and Ireland which spans over a 50 acre site. Product is available from stock or made to order within a very short time frame (2-3 weeks). Over 98% of GB deliveries arrive on the day of request which provides customers confidence in supplying material on time.
ColourTobermore only use the best Iron Oxide pigments available on the market to produce the distinctive colour range available within facing brick. These pigments are manufactured to BS EN 12878. The colour is throughout the product. Tobermore can demonstrate the excellent colour retention properties through completed projects.
DurabilityAll Tobermore facing bricks are categorised as frost resistant (F2) as proven by independent laboratory tests.
VoidsTobermore facing brick are manufactured with three perforated voids in each brick. This provides significant benefits to the brick layer as the product will bond to the mortar on both sides. This will help to reduce the issue of floating.
StrengthTobermore facing bricks exceed a minimum crushing strength in excess of 22N/ mm2 and comfortably exceed the performance requirements of the standard. Tobermore facing brick will gain strength with age.
EfflorescenceTobermore use market leading vapour curing technology in the manufacture of all facing bricks. Facing bricks are vapour cured for a minimum 12 hour period which significantly reduces the possibility of efflorescence.
ChoiceTobermore produce facing bricks in colours which fully complement and blend with the wide range of block paving and paving flag products also on offer.
TolerancesTobermore manufacture products on the best manufacturing machines and moulds available on the market. This ensures tolerances are accurate and consistent.
AggregatesTobermore own and produce the sand and aggregate which is used to manufacture the product. This ensures we are in complete control of the main raw materials and guarantee consistency of quality.
PacksTobermore facing brick packs are palletised, shrink wrapped, and weigh approximately 1.2 tonne. Blended coloured bricks are contained within each pack. It is desirable to mix from three or four different pallets.
SpecialsTobermore have an extensive range of specials available. See pages 110-111.
Mortars and Expansion JointsMortars and expansion joint recommendations should be decided by the architect in accordance with BS EN 5628. Tobermore Kingston and Lansdowne Facing Bricks can be used for vertical movement joints at intervals of 7.5m-9m, when used with the correct mortar and design principles in accordance with BS5628 and PD6697.
112
Wal
ling
& M
ason
ry
113
Wal
ling
& M
ason
ry
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
engineering quality concrete brick• Manufactured from dense aggregates• Provides durability and high strengths• Offers frost resistance and low water absorption• Produced for utility purposes - colour consistency and
product finish will not be up to the same standard as Lansdowne and Kingston
product specifications coloursProduct type Engineering quality concrete brick with smooth finishManufactured to BS EN 771-3:2011Brick Type Perforated (3 holes per brick)Efflorescence Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 50N/mm2 mean (Air Dry)Shrinkage (Moisture movement) 0.40mm/mWeight 3kg per brick (average)Durability (Freeze/Thaw) F2 (Severe Exposure)Tolerances Category D1Reaction to fire A1Water absorption by capillary
2 g/m2s
Water absorption <7% water absorption on averageSoluble Salts S2Net dry density 2270 kg/m3
Gross dry density 2030 kg/m3
Shear bond strength 0.15N/mm2
Thermal Conductivity Protected 1.62W/m K Exposed 1.31 W/m KMortars & Expansion Joints
Refer to BS 5628-3:2005
Bed Reinforcement Refer to BS 5628-3:2005F10 385
Applications Please refer to BS 5628-3:2005 for guidance. These bricks are not suitable for use as a DPC and should not be used when industrial effluents or acids are present.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 22kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
A+, according to the Green Guide to Specification, 4th Edition 2009.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
product size (mm) colours availablein
stockno. per
sliceno. per pack
weight (kg) per pack
ENGINEERING QUALITYCONCRETE BRICK
215 x 100 x 65 Charcoal, Red YES 44 440 1300
Red Charcoal
Product Profile
215
100
65
3 perforated voids
Important Information
If using Tobermore Engineering Quality Concrete bricks in conjunction with other walling products (e.g. clay bricks) we would recommend that you refer to the general mechanical properties (including movement/shrinkage) of both products to ensure they are compatible. Your project engineer will be able to provide advice on this.
114
Wal
ling
& M
ason
ry
Country Stone Bracken | Martello Park, Pembroke
115
Wal
ling
& M
ason
ry
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
This product is available to download from our website in BIM Level 2 format.BIM
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
country stonenatural, nostalgic style• Emulates natural stone• Vibrant long-lasting colours*• Significantly reduced efflorescence**• Creates a classic, vintage look
product specifications coloursProduct type Concrete BlockManufactured to BS EN 771-5:2011Efflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 20N/mm2 meanInstalled to BS 5628-3:2005Shrinkage (Moisture movement) 0.41mm/mDurability (Freeze/Thaw) F2 (Severe exposure)Tolerances D1Reaction to fire A1Water absorption by capillary
3 g/(m2 x s)
Water absorption <7% water absorption on averageWater vapour diffusion coefficient
30/100 µ
Net dry density 2210 kg/m3
Gross dry density 2200 kg/m3
Shear bond strength 0.15N/mm2
Thermal conductivity Protected 1.25W/m K Exposed 1.43W/m KMortars & Expansion Joints
BS 5628-3:2005
Bed Reinforcement BS 5628-3:2005F10 295
Applications Above ground, main external wall construction, boundary walls, columns and partitions.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 36kgCo2e/m2
Recyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
A+, according to the Green Guide to Specification, 4th Edition 2009.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
product size (mm) colours availablein
stockm2 per pack
m2 per slice
no. per m2
no. per pack
weight (kg) per pack
COUNTRY STONE BIM single course mixed length Bracken, Buff*, Cedar, Heather, Natural, Slate YES tbc tbc tbc tbc tbcsingle sizes Bracken, Buff*, Cedar, Heather, Natural, Slate YES tbc tbc tbc tbc tbc
COUNTRY STONE COPING 300 x 208 x 80 Bracken, Buff*, Cedar, Heather, Natural, Slate YES - - - 120 1328
Heather
Cedar
Natural
Bracken
Slate
Country Stone Heather
sizes from September 2015 size (mm)
current sizes size (mm)
COUNTRY STONE
[single course mixed length](all sizes in one pack)
140 x 375 x 100 140 x 370 x 105140 x 225 x 100 140 x 275 x 105140 x 160 x 100 140 x 245 x 105140 x 240 x 100 140 x 215 x 105140 x 200 x 100 140 x 185 x 105
COUNTRY STONE
[single sizes]
65 x 375 x 10065 x 300 x 10065 x 225 x 100140 x 375 x 100140 x 300 x 100140 x 225 x 100215 x 440 x 100215 x 300 x 100
*NEW Buff colour will be launched in Autumn 2015.
Buff
116
Wal
ling
& M
ason
ry
Country Stone Bracken | Barronsfield Grange, Glasgow
117
Wal
ling
& M
ason
ry
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
technical informationwalling & masonryImportant Information
Any technical information provided by Tobermore in relation to any product (whether before or after order) is provided by way of GUIDANCE ONLY and, to the fullest extent permitted by law, without liability on the part of Tobermore for any loss or damage suffered as a result of relying upon it. Such technical information should not be relied upon in substitution for obtaining independent expert advice prior to using any product from both a suitably qualified engineer and building contractor, in particular, as to the suitability of the product for use at the intended site for the intended scheme.
Walling and masonry are established products in the construction industry and have a number of British Standards (BS) dedicated to ensure they are professionally installed. Refer to the following relevant BS guidelines for detailed information.
Note: BS guidelines are subject to change and therefore you should refer to www.bsigroup.com for the latest version.
installationCountry Stone - InstallationTobermore’s Country Stone products are designed to recreate traditional stone sizes and to co-ordinate with standard cavity wall construction. When used in housing projects, a clear cavity must be retained. All work must be protected during construction and must be designed and built in accordance with accepted industry standards and practice. Builders familiar with conventional brickwork will find that similar installation principles apply.Joints can be finished flush or tooled depending on the overall effect required. Raked joints are not recommended. It is vital that all horizontal and vertical joints between Country Stone blocks must be compacted and free from voids. Shell bedding should not be used.
Country Stone - Laying PatternsCountry Stone is available in a range of sizes which can be laid random, coursed, random brought to course and mixed pack single course. Contact Tobermore for Laying Patterns.
Facing Bricks - InstallationTobermore’s Facing Brick products are designed to co-ordinate with standard cavity wall construction. When used in housing projects, a clear cavity must be retained. All work must be protected during construction and must be designed and built in accordance with accepted industry standards and practice. Builders familiar with conventional brickwork will find that similar installation principles apply.Bricks should be handled with care and stored on a level, free-draining surface that is protected from the elements. Polythene wrapping provides protection from the weather. If this is removed it should be replaced or alternative protection needs to be provided.When work stops or is interrupted by inclement weather conditions, brickwork should be protected immediately with polythene sheeting that is held in place with a suitable fixing. If new brickwork is not protected efflorescence, patchy mortar colour, patchy brickwork and staining can occur. It should be noted that laying of brickwork should be discontinued when the temperature falls below 3°c or when frost is imminent. Facing bricks should be constructed in areas that are greater than 10m away from de-icing salts.
Facing Bricks - Mortars and expansion joints Mortars and expansion joint recommendations should be decided by the architect in accordance with BS EN 5628. Tobermore Kingston and Lansdowne Facing Bricks can be used for vertical
BS 5628-3:2005 Code of practice for the use of masonry. Materials and components, design and workmanship.
movement joints at intervals of 7.5m-9m, when used with the correct mortar and design principles in accordance to BS5628 and PD6697.
maintenanceRoutine cleaning and maintenance is required to keep the overall appearance of products in pristine condition.
Good Practice during Construction • If mortar dry’s on the surface of the bricks it will stain the
product and may not be removed.• Mortar extruding from joints should be removed when the
mortar is wet and during the process of laying.• Any mortar smears on the brick surface should be removed
by dry or wet brushing.• Scaffolding should be installed as per regulatory instructions.
Please note that mortar can drop and hit the scaffolding and then also go onto the wall. You should inspect the work area at all times to ensure the brick surface remains mortar free.
• When it rains be careful that any wet mortar on the scaffolding does not get ‘splashed’ onto the wall.
• When work stops or is interrupted by inclement weather conditions, brickwork should be protected immediately with polythene sheeting that is held in place with a suitable fixing. If new brickwork is not protected efflorescence, patchy mortar colour, patchy brickwork and staining can occur.
• Bricks should always be covered with polythene sheets to avoid getting damp or dirty when not being used.
General Cleaning Advice • It is always important to keep bricks as clean as possible
while laying and tooling. See Good Practice above.• If mortar has been allowed to dry on the surface of the bricks
the options you have to clean it off are as follows; Each process should be tested first and should ensure the facing bricks are not damaged - a. Dry brushing b. Wet brushing c. Using a ‘like coloured’ brick to rub the stained brick d. Pressure washing - should only be used as a last resort as it will damage the surface and the mortar joint if not completed correctly (this method cannot be attempted until the area has been allowed to set for a minimum of 7 days)
• Acid cleaning should be avoided
Important notes Instructions and warningsRefer to page 130.
Vibrant long-lasting colours*Tobermore only use high quality Iron Oxide pigments, (which are made to BS EN 12878), to produce our strong, vibrant and deep colours. Our state-of-the-art equipment makes our products extremely dense thus ensuring that our colours remain intact for very long periods. For example when we examine products which are 10 years old we can see that the colour retention is excellent. Tobermore would recommend that to maintain the colour and quality of product a regular maintenance programme is carried out on all projects.
118
Secu
ra R
etai
ning
Wal
ls
cost effective
fast and easy installation
mortar-free dry build
ideal for creating distinctive curves
nostalgic rugged appearance
internal and external 90 degree corners
securaretainingwalls
product range
secura lite 120
secura grand 122
technical information
methods of construction 124
guidelines for drainage, geogrid & backfill 125
world class
119
Secu
ra R
etai
ning
Wal
ls
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
Tobermore’s range of Secura retaining wall products offer architects, engineers, contractors and house builders a cost-effective solution for any type of application or retaining wall project, whether large or small in size. Not only does Secura walling guarantee a more efficient utilisation of land, but the mortar-free, dry building products promise a fast and easy installation process.If you require specialist advice Tobermore can put you in contact with experienced design consultants or alternatively you can refer to the following source of information BS 8002.
120
Secu
ra R
etai
ning
Wal
ls
Secura Lite Slate | Marine Gardens, Carrickfergus
121
Secu
ra R
etai
ning
Wal
ls
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
secura litemortar-free retaining walling• Used mainly in domestic applications• Features a unique aged finish• Available in a combination of three block widths• Creates a random stone appearance• Vibrant long-lasting colours*• Significantly reduced efflorescence**
product specifications coloursProduct type Concrete BlockManufactured to BS EN 771-3:2011Manufacturing process Processed surface to leave aged antique appearanceEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 30N/mm2
Installed to BS 8002D41 310
Applications Residential. Consult the relevant British Standard for specific details.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 1.6kgCo2e/eaRecyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
Refer to the Green Guide to Specification, 4th Edition 2009.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
product size (mm) colours availablein
stockLM per pack
LM per slice
no. per m2
no. per pack
weight (kg) per pack
SECURA LITE(all three sizes in one pack)
320 x 200 x 80 Bracken, Heather, Slate YES 33.6 0.84 44.64 120 1121280 x 200 x 80240 x 200 x 80
SECURA LITE COPING 310/255 x 240 x 70 (tapered coping) Bracken, Heather, Slate YES - - 3.54 LM 160 1744
Heather
Slate
Bracken
230mm
320mm300mm
400mm
125mm
200mm
200mm
240mm
80mm
80mm
80mm
200mm
200mm
280mm
240mm
80mm
80mm
280mm
320mm
80mm
300mm300mm
300mm
300mm
230mm
320mm300mm
400mm
125mm
200mm
200mm
240mm
80mm
80mm
80mm
200mm
200mm
280mm
240mm
80mm
80mm
280mm
320mm
80mm
300mm300mm
300mm
300mm
230mm
320mm300mm
400mm
125mm
200mm
200mm
240mm
80mm
80mm
80mm
200mm
200mm
280mm
240mm
80mm
80mm
280mm
320mm
80mm
300mm300mm
300mm
300mmproduct profile
Secura Lite Heather
Important Information
Secura Lite can be built to a maximum height of 960mm.
122
Secu
ra R
etai
ning
Wal
ls
Secura Grand Heather | Leith Links, Edinburgh
123
Secu
ra R
etai
ning
Wal
ls
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
This product is available to download from our website in BIM Level 2 format.BIM
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
secura grandmortar-free retaining walling• Used mainly in large applications• Can be combined with Geogrid to form reinforced soil walls
for retaining structures• Features a unique aged finish• Vibrant long-lasting colours*• Significantly reduced efflorescence**
product specifications colours
eco version available
Heather
Slate
Bracken
product size (mm) colours availablein
stockm2 per pack
no. per m2
no. per pack
weight (kg) per pack
SECURA GRAND BIM 400 x 230 x 200 Bracken, Heather, Slate YES 3.84 12.5 48 1288SECURA COPING 300/235 x 330 x 70 (tapered coping) Bracken, Heather, Slate YES - 3.73 LM 120 1700SECURA GRAND CORNERS 430 x 230 x 200 Bracken, Heather, Slate MADE TO
ORDER - - 48 1464
Product type Concrete BlockManufactured to BS EN 771-3:2011Manufacturing process Processed surface to leave aged antique appearanceEfflorescence** Minimum 12 hour vapour curing to significantly reduce
the possibility of efflorescenceStrength > 30N/mm2
Installed to BS 8002D41 310
Applications Residential and Commercial. Consult the relevant British Standard for specific details.
Energy used 100% renewable energyWater used 100% water used from rainwater harvesting systemCarbon Footprint 5kgCo2e/eaRecyclable 100% of this product can be recycledManufacturing location Produced in the UK with locally sourced materials
ratingwww.bre.co.uk
Refer to the Green Guide to Specification, 4th Edition 2009.
Tobermore products are manufactured in accordance with an accredited ISO 9001:2008 quality system. Manufacturing facilities are accredited to ISO14001:2004 Environmental Management. The company publish Environmental labels and declarations in accordance with BS EN ISO 14021:2001.
Secura Grand segmental retaining wall systemBBA Roads and Bridges Certificate 15/H230
230mm
320mm300mm
400mm
125mm
200mm
200mm
240mm
80mm
80mm
80mm
200mm
200mm
280mm
240mm
80mm
80mm
280mm
320mm
80mm
300mm300mm
300mm
300mm
15/H230
product profile
Secura Grand Slate
124
Secu
ra R
etai
ning
Wal
ls
Drainage stone
Foundation
Walling units
Drainage pipe
Retained soil
Backfill
Retained Soil
Backfill
Drainage stone
Walling units
Drainage pipeFoundation
Layers of Geogrid
Retained soil
Clay cap
Concrete fill
Drainage mat
Drainage pipe
Walling units
Foundation
technical informationsecura retaining wallsImportant Information
Any technical information provided by Tobermore in relation to any product (whether before or after order) is provided by way of GUIDANCE ONLY and, to the fullest extent permitted by law, without liability on the part of Tobermore for any loss or damage suffered as a result of relying upon it. Such technical information should not be relied upon in substitution for obtaining independent expert advice prior to using any product from both a suitably qualified engineer and building contractor, in particular, as to the suitability of the product for use at the intended site for the intended scheme.
Methods of constructionThere are two common types of retaining wall systems; Gravity and reinforced.
gravity retaining wallsGravity retaining walls depend on the weight of their mass to resist pressures from behind and are ideal for retaining walls up to 1.25 metres high.
Suitable Secura productsSecura LiteSecura Grand
reinforced retaining wallsGeogridGeogrid is the most commonly used material to reinforce retaining walls above 1.25m metres. It is a mesh-like material installed in layers between the blocks and covered with backfill which is then compacted. This creates a soil mass structure behind the wall, resisting the forces acting against it.
Suitable Secura productsSecura Grand
Concrete BackfillConcrete is poured into the space behind the blocks and the excavated space, it then acts as a homogenous mass designed to be a mass gravity wall.
This method generally reduces the space required behind the retaining wall by around half compared to that required for geogrids. It is a more expensive option so is only specified where space is limited.
Suitable Secura productsSecura Grand Important notesInstructions and warningsRefer to page 130.
secura
retaining
walling
guidelines for the design &
construction of Tobermore’s
range of secura retaining
walling products
v2.2
TMsecuraretainingwalling
guidelines for the design &
construction of Tobermore’s
range of secura retaining
walling products
v2.2
TM
securaretainingwalling
guidelines for the design & construction of Tobermore’s range of secura retaining walling products
v2.2
TM Secura Retaining Walling Brochure also available
Vibrant long-lasting colours*Tobermore only use high quality Iron Oxide pigments, (which are made to BS EN 12878), to produce our strong, vibrant and deep colours. Our state-of-the-art equipment makes our products extremely dense thus ensuring that our colours remain intact for very long periods. For example when we examine products which are 10 years old we can see that the colour retention is excellent. Tobermore would recommend that to maintain the colour and quality of product a regular maintenance programme is carried out on all projects.
125
Secu
ra R
etai
ning
Wal
ls
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
drainage, geogrid & backfillguidelines
Drainage 1. Lay a drainage pipe at the back of the wall and cover with graded granular filter, maximum stone size 20mm.
Geogrid For all reinforced retaining walls using Tobermore Secura products we would recommend a Fortrac Geogrid. No substitutes allowed. Fortrac Geogrids are available from Tobermore.
1. Place the Geogrid on top of the block at the specified course ensuring that the edge is 25mm back from the front of the block.
2. Roll out Geogrid ensuring that the principal reinforcement direction is perpendicular to the wall. Also ensure that the Geogrid is butt joined and never overlapping. Cut geogrid to required length.
3. Place the next course of blocks on top of the Geogrid and slide forward to hold in place.
4. Further courses of blocks may be placed in position up to the next specified Geogrid course.
5. Lay the Geogrid on top of the compacted backfill, ensuring that it is lying flat on the backfill. Pull the Geogrid taut to remove any rucks, folds or wrinkles.
6. Continue building the wall, placing the Geogrid and compacting the backfill as above to the required height.
Backfilling1. Place the supplementary backfill on the Geogrid and spread it out away from the wall, leaving a gap of 150mm - 300mm between the wall
and the supplementary backfill.
2. Fill the gap between the wall and the compacted layer with drainage backfill, maximum stone size 20mm.
3. Compact the supplementary backfill in 250mm layers, working from the wall towards the rear of the Geogrid.
4. Compaction by plate vibrator is recommended. Vibrating or static rollers should not be used within 1 metre from the back of the wall. Compacting specifications can be obtained from Tobermore.
Notes: The above diagram illustrates the construction of straight walls using Geogrid. (For the construction of curved walls contact Tobermore)
126
Eco
Pavi
ng &
Wal
ling
Eco Tegula Trio Cedar | Airfield House, Dundrum
paving & wallingTobermore offer an extensive range of eco paving and walling products which have excellent rates of recycled contents and carbon footprint results.
block paving
eco tegula trio 128
eco fusion 128
eco sienna duo 128
eco shannon 128
eco pedesta 128
hydropave permeable paving
eco hydropave fusion 128
eco hydropave 240 128
paving flags
eco mayfair flags 129
eco textured flags 129
kerbs
eco country kerb 129
secura retaining walls
eco secura grand 129
walling
eco lansdowne facing brick 129
eco kingston facing brick 129
world class
127
Eco
Pavi
ng &
Wal
ling
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
128
Eco
Pavi
ng &
Wal
ling
eco tegula trio
not less than
62%recycled content
carbon footprint 20kgCo2e/m2
See page 13 for all colour swatchesHeather
eco pedesta
not less than
64%recycled content
carbon footprint 22kgCo2e/m2
See page 39 for all colour swatchesBrindle
eco fusion BIM
not less than
64%recycled content
carbon footprint 26kgCo2e/m2
See page 17 for all colour swatchesSilver
eco hydropave fusion BIM
not less than
70%recycled content
carbon footprint 26kgCo2e/m2
See page 55 for all colour swatchesMid Grey
eco sienna
not less than
64%recycled content
carbon footprint 28kgCo2e/m2
See page 21 for all colour swatchesGraphite
eco hydropave 240
not less than
64%recycled content
carbon footprint 34kgCo2e/m2
See page 59 for all colour swatchesBracken
eco shannon BIM
not less than
64%recycled content
carbon footprint 22kgCo2e/m2
See page 33 for all colour swatchesBracken
ISO 9001:2008 ISO 14001:2004
eco block paving
eco hydropave permeable paving
Eco Specification Sheets available on our website
129
Eco
Pavi
ng &
Wal
ling
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
eco mayfair flags
not less than
66%recycled content
carbon footprint 20kgCo2e/m2
See page 67 for all colour swatchesSilver
eco textured flags
not less than
66%recycled content
carbon footprint 18kgCo2e/m2
See page 69 for all colour swatchesBuff
eco country kerb
not less than
55%recycled content
carbon footprint 10kgCo2e/ea
See page 95 for all colour swatchesGranite Aggregate
eco secura grand
not less than
61%recycled content
carbon footprint 5kgCo2e/ea
See page 123 for all colour swatchesHeather
eco kerbs
eco lansdowne
not less than
61%recycled content
carbon footprint 22kgCo2e/m2
See page 107 for all colour swatchesBurren
eco kingston
not less than
61%recycled content
carbon footprint 22kgCo2e/m2
See page 109 for all colour swatchesMoorland
eco walling
eco secura retaining walls
All Eco products are Special Order items.
This product is available to download from our website in BIM Level 2 format.BIM
ISO 9001:2008 ISO 14001:2004
See instructions and warnings on page 130
eco paving flags
Eco Specification Sheets available on our website
instructions& warnings
130
Tobe
rmor
e
(As referred to in Tobermore’s Conditions of Sale)
CORE TERMS (PAVING & WALLING)
ProductAll products should be carefully inspected for defects or damage upon delivery and prior to being laid or fitted.
Product Information Within Tobermore, design and development of products is a continuing process, and product information is subject to change without notice. Accordingly, please check with Tobermore to ensure that the product information you have represents the most up-to-date product information.
Installation All products should be installed in accordance with the latest British Standard.
ColourTobermore produces paving and walling products with excellent density and durability, however, as with all concrete products, slight colour variations and/or weathering may occur.Although every effort is made to ensure consistency of product colour, variations between production batches can occur. In particular single colours such as Red, Charcoal, Buff, Natural and Golden will have variations if products are ordered at different times. Tobermore therefore recommends that when purchasing products, especially in larger quantities, they all come from the same batch and that products are thoroughly mixed on site by drawing from a minimum of 3 pallets.The colour of new paving blocks, flags and walling products will inevitably vary compared to those which have been laid for a period of time.All colour illustrations in Tobermore’s brochures are as accurate as the printing process will allow. For a more accurate colour match refer to actual product samples available from any of Tobermore’s Paving and Walling Centres.
EfflorescenceEfflorescence is a white crystalline deposit that occurs naturally on the surface of concrete materials. Tobermore use market leading technology to significantly suppress the occurrence of efflorescence, however, if it occurs, it may mask the colour of the product for a period of time, but tends to be washed away gradually by rain. Tobermore do not replace products with efflorescence. Packs of products which have had packaging removed should always be re-covered with appropriate packaging to prevent the occurrence of secondary efflorescence.
Surface ScratchesMinor scuffs or bruises may occur during installation (for example, during any plate vibrating process). In Tobermore’s experience, these marks usually weather off through time.
OrderingTo avoid waste, please ensure that your contractor accurately measures the area on site before ordering products. In Tobermore’s experience, dimensions taken from a project plan can vary significantly from the final layout.
Manufacturing & Quality SystemsTobermore is a BS EN ISO 9001:2000 and BS EN ISO 14001 registered company. Tobermore uses an integrated management system to manage all health & safety and environmental issues.
Product MaintenanceRoutine cleaning and maintenance is required to keep the overall appearance of products in pristine condition.
Laying multi-blend coloured paving blocks, flags and walling productsTo achieve an even blend of colour when laying multi-blend paving blocks, flags and walling products, it is desirable to mix from 3 or 4 different pallets.
Why put up with efflorescence spoiling your job...
What is Efflorescence?Efflorescence is the single biggest problem encountered by manufacturers of concrete paving products, as the ugly white stains spoil the appearance of the paving and not surprisingly customers are unhappy.
Reduced efflorescenceWithin our manufacturing process we have taken a number of steps to ensure that the occurrence of efflorescence is very significantly reduced on all Tobermore block paving and slabs.
...when you can have this?
131
Tobe
rmor
e
visit www.tobermore.co.uk | call us 0844 800 5736 | follow us
Queries & ComplaintsPlease contact one of Tobermore’s Paving & Walling Centres or offices (contact details at www.tobermore.co.uk) with any queries or complaints. Any complaints must be notified to Tobermore without delay.
CORE TERMS (PAVING ONLY)
Product MaintenanceLight coloured paving blocks and flags emphasise tyre marks and oil spills on the driveway. Please note that these products will need more maintenance if overall appearance is to be maintained.
Initial CleaningWhen an area has just been paved, allow it to settle for a few days. After this, you may wish to lightly hose down the paving to remove any excess sand or dirt. The area should then be treated with a weed killer suppressant 2-3 times per year as required.
General CleaningPaving requires regular maintenance, including regular sweeping to prevent the build up of detritus. Tobermore recommends that paving is cleaned 2-3 times per year.For general cleaning of dirt and algae, vigorous brushing with a stiff yard brush with plenty of hot detergent solution (washing up liquid or non-bio washing powder), thoroughly rinsed with clean water, should suffice. Repeated treatment may be required for paved areas sited beneath trees or in permanent/near permanent shade.A light power hose at medium pressure is generally all that is required to clean general dirt and grime. Any jointing material which is removed must be replaced. Do not use high pressure powerwashers as aggressive power-washing can damage the product surface. A trial area should be tested before large scale powerwashing takes place.
Moss, Lichen and AlgaeThick growths of moss or lichen must be removed first by scraping out the joints and then treating the area with a moss killer such as anti-moss paving cleaner. Anti-moss is designed to remove moss, lichens and algae. It is best applied in dry weather. After being applied it will take a few days to be fully effective. Once the moss and lichens have been killed, they can easily be brushed off. Anti-moss also leaves a residue in the sand joint which will help reduce the likelihood of re-growth. The manufacturer’s instructions should always be followed when using any cleaning agent.
WeedsLarge weeds should be removed by hand and then the area treated with a weed killer (available from any good garden centre). Smaller weeds can then be treated directly with weed killer and these weeds should start to die within days. The manufacturer’s instructions should always be followed when using any weed killing agent.
Block Paving SealerIt is possible to seal block paving with a resin material which combats staining and weed growth and which also enhances colour and appearance. The acrylic sealer is sprayed onto the block paving and forms a ‘skin’ on top of the paving and the jointing material giving an easily maintained finish. The manufacturer’s instructions should always be followed when using any sealing agent.
FOR HYDROPAVE PRODUCTS
Installation - HydropaveTobermore recommends that its Hydropave products be installed in conjunction with a BS EN 7533-13:2009 designed permeable paving system. Please note: a permeable paving design relies heavily on
using the correct aggregates. Prior to installation, we would ask you to test both the 4/20mm coarse graded aggregate and also the 6.3-2mm bedding and jointing grit as per the relevant British Standard specification (BS EN7533-13:2009). In particular, the material should be categorised as LA30, FI20 and MDE20 according to Table A.3, within this standard. The grit should be insoluble in dilute hydrochloric acid and should be naturally occurring material. In our experience, incorrect use of aggregates is one of the most common reasons for failure of a permeable paving design. All joints must be filled to the top with 6.3-2mm grit. Joints which are not fully filled can lead to possible movement of the blocks after use. We recommend that after a few weeks use that any joints, which have settled and are not full, are topped up with grit. Joints should be kept filled at all times. You need approximately 1 ton of grit for every 100m2 of 80mm paving. Care should be taken that the permeable joints do not become contaminated as work on the scheme is completed. Special care needs to be taken when soft landscaping is carried out so that soil does not enter the joints. If any other design methodology is to be used take independent expert advice in advance.
FOR FACING BRICK PRODUCTS
Installation – Facing BricksTobermore’s Facing Brick products are designed to co-ordinate with standard cavity wall construction. When used in housing projects, a clear cavity must be retained. All work must be protected during construction and must be designed and built in accordance with accepted industry standards and practice. Builders familiar with conventional brickwork will find that similar installation principles apply.Bricks should be handled with care and stored on a level, free-draining surface that is protected from the elements. Polythene wrapping provides protection from the weather. If this is removed it should be replaced or alternative protection needs to be provided.When work stops or is interrupted by inclement weather conditions, brickwork should be protected immediately with polythene sheeting that is held in place with a suitable fixing. If new brickwork is not protected efflorescence, patchy mortar colour, patchy brickwork and staining can occur. It should be noted that laying of brickwork should be discontinued when the temperature falls below 3°c or when frost is imminent.Facing bricks should be constructed in areas that are greater than 10m away from de-icing salts.
FOR COUNTRY STONE PRODUCTS
Installation - Country StoneTobermore’s Country Stone products are designed to recreate traditional stone sizes and to co-ordinate with standard cavity wall construction. When used in housing projects, a clear cavity must be retained. All work must be protected during construction and must be designed and built in accordance with accepted industry standards and practice. Builders familiar with conventional brickwork will find that similar installation principles apply.Joints can be finished flush or tooled depending on the overall effect required. Raked joints are not recommended. It is vital that all horizontal and vertical joints between Country Stone blocks must be compacted and free from voids. Shell bedding should not be used.
FOR SECURA PRODUCTS
Installation - SecuraAll Secura products should be installed in accordance with British Standard BS8002. When constructing a retaining wall, ensure that you follow the design provided by the scheme engineer.
Tobermore Head Office 2 Lisnamuck Road, Tobermore, County L’derry, BT45 5QFTel: 028 7964 2411 Fax: 028 7964 4145www.tobermore.co.uk | [email protected] | 0844 800 5736 |